PT/51 ubminiature cylindrical connectors 3 grooves 3 rivets 5 differents keys A CHARACTERTC E1/F ain features of each series PT/51 eries solder version (ilitary, aeronautics and industrial applications) (in accordance with FC UTE 93 (HE301) / F L 55 (51) / il-c-262) 35 different insert arrangements ize and hooded ( tines technology) non-removable gold plated contacts Retention of the contacts in the insert: 67 for size contacts and 1 for size contacts Air leakage: < cm 3 per hour under 2 Bar of differential pressure nserts in eoprene elastomer Rear elastomer grommet independent of the insert to allow soldering process tandard shell plating: olive drab cadmium. Cadmium free version also available (see how to order p. -21) Temperature range: -55 C/+5 C. PT/51 eries crimp version (ilitary, aeronautics and industrial applications) (in accordance with FC UTE 93 (HE301) / F L 55 (51) / VG9532 / il-c-262) 25 different insert arrangements ize and hooded ( tines technology) crimp removable gold plated contacts, front-release (delivered non-mounted in the insert to allow crimping process) Retention of the contacts in the insert ensured by metallic clips or by a hard dielectric retention disc Rear elastomer grommet and insert in one part tandard shell plating: olive drab cadmium. Cadmium free version also available (see how to order p. -21) Temperature range: -55 C/+5 C. PT/51 eries PCB and wire wrap versions (ilitary, aeronautics and industrial applications) (in accordance with FC UTE 93 (HE301) / F L 55 (51) / VG9532 / il-c-262) 23 different insert arrangements (size pin contacts only) Wire wrap contacts fitted in the insert and removable (front release) PCB contacts fitted in the insert and non-removable. Custom designed flexible circuit possibility. Please consult us. 3 types of PCB contacts: Y, G and Y. Available in box mounting receptacle and jam nut receptacle tandard shell plating: olive drab cadmium. Cadmium free version also available (see how to order p. -21) Temperature range: -55 C/+5 C. PT eries crimp version (ndustrial application only) (intermatable with FC UTE 93 (HE301) / F L 55 (51) / VG9532 / il-c-262) different insert arrangements ize and specific crimp removable gold plated contacts, front release (delivered not mounted in the insert to allow crimping process) Retention of the contacts in the insert ensured by compression of the elastomer insert 30. Rear elastomer grommet independent of the insert Temperature range: -55 C/+5 C. Hermetic receptacles 26 different insert arrangements ize and solder pin contacts in nickel alloy Hermeticity: leak -6 cm 3. s -1 under 1 bar differential pressure Physical shock: 0 G s Glass insert teel shells with tin plating finish. DECRPTO READ TH FORATO FRT TO FACLTE THE UE OF TH DOCUET You will find in this document the PT/51 connectors in accordance with the American il-c-262 tandard in crimp, solder, wire wrapp, PCB versions, with different sealing levels which are well known in aeronautics, military and industrial applications. A second industrial crimp version called PT is also presented and is intermatable with the PT/51 series. PT/51 eries provides you with a multitude of possibilities through their different backshell possibilities, contact terminations, insert arrangements... The same product can be ordered with different designations. The standard P/ corresponds to both connector body and rear accessory. Please refer to PT and 51 ordering information on pages, 21 for the normal ordering. For specific needs, you may order the connector body only without rear accessory. n this case, refer to page for specific ordering information. f you require the military standard P/, please refer to the chart of cross references mentioned on pages 23,. As far as PT ordering information is concerned, you will find it on page. ROH versions : - nickel plated - black anodised The multi-purpose bayonet coupling connection PT/51
PT/51 TABLE OF COTET A CHARACTERTC ain features of each series..................................................... 1 TECHCAL CHARACTERTC Electrical characteristics......................................................... 3 Contacts dimensions and cable sizes............................................... 3 Coding system / Alternate insert positions.......................................... 3 nsert arrangements........................................................... Overall dimensions..........quare flange receptacles............................ 5/6 n-line receptacles................................ 7//9 traight plugs................................. 9//11 Jam nut receptacles............................... /13 Angle plugs..................................... 13/ Receptacle with locking ring........................... Thru bulkhead receptacle............................. PCB and wire wrapp versions receptacles................. 15 Panel drilling................................................................ 15 Hermetic receptacles......................................................... How to choose your screened backshell........................................... 17 ACCEORE Protective caps.............................................................. ut ring for square flange receptacles............................................. Dummy receptacles, panel gaskets, plastic dust caps................................. 19 Contacts and contact accessories................................................ 19 Heatshrink moulded pieces or heatshrink sleeves for rear accessories..................... 19 75 angle potting accessory.................................................... 19 TOOLG Crimping tools, insertion and removal tools........................................ 19 Tools for rear accessories or plugs................................................ 19 COECTOR ORDERG FORATO PT eries................................................................... 51 eries.................................................................. 21 PT eries.................................................................. PT connector bodies and PTA backshell........................................ /23 Cross references (PT, 51, HE301, VG or designation).......................... 23/ 2
Electrical characteristics for PT/51/PT series ize contacts (ø 1mm) ize contacts (ø mm) ervice ervice ervice Test voltage at sea level 1500 Vrms 1500 Vrms 2300 Vrms Test voltage at 200 m 375 Vrms 375 Vrms 600 Vrms Current rating per contact* 7.5 A 13 A nsulation resistance at ambient 5000 Ohms 5000 Ohms Contact resistance at ambient 2 mohms 1.5 mohm *: Current rating must not be applied at the same time to 50% of the contacts of the connector. TECHCAL CHARACTERTC Contact dimensions and cable sizes for PT/51/PT series Contacts Jauge ection Diameter in mm il-w-506 (mm 2 ) on conductor on insulator Type ize ø in mm min. min. older 1 to 0.3-0.93-1.3 1.2 to 0.60-1.91-2. Crimp 1 * to 0.*-0.93 0.6 1.3 1.2 * to 0.3*-1.91-2. *: Possible when used with reducing sleeves (see page 19 for ordering information). Coding system/alternate insert positions To avoid cross-plugging problems in applications requiring the use of more than one PT/51 connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. As shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. Position W Position X Position Y Position Z Diagrams show front face of pin insert or rear of socket insert. 3 hell nsert nsert rotation (in degrees) size Arrangement W X Y Z -2 5 1 - - -3 60 2 - - -3A 60 - - - -33 90 - - - - 5 - - - -6 90 - - - -9 90 0 0 0-3 - - 0 - - 90 1 3 2-60 155 0 5 - - - - - -5 0 92 3-3 90 - - -15 17 1 155 23-15 90 0 0-19 30 5 5 - - 5 152 0 3-23 15 0 - - hell nsert nsert rotation (in degrees) size Arrangement W X Y Z -26 60-5 33-11 62 119 1 30-30 0 193 25 350-32 5 13 2 265-23 3 333 37-70 5 215 0-25 72 2 2-72 2 2-39 63 252 333-1 5 6 5 - -21 135 175 39-32 72 5 215 2-3 62 2 2-36 72 2 2-1 39 135 26 - -55 30 2 6 3-61 90 0 0 3 PT/51
TECHCAL CHARACTERTC nsert arrangements H nsert arrangements ervice rating umber of contacts Contact size H -2 2 W -3 3-3 3-3A (-9) 3 1 nsert arrangements ervice rating umber of contacts Contact size - -6 6 - - -9 6-5 5-23 1-32 32 1 HW -30 - HW -11 11 - -19 19-26 26 - HW -15-33 3 H - HW H HW nsert arrangements ervice rating umber of contacts Contact size nsert arrangements ervice rating umber of contacts Contact size Front view of male insert. - HW nsert arrangements ervice rating umber of contacts Contact size - - -21 21-32 32-1 1 W nsert arrangements ervice rating umber of contacts Contact size : Caution: -3A and -3 insert arrangements are not intermatable. H: Available in hermetic version. -39 37 2 HW nsert arrangements ervice rating umber of contacts Contact size -25 25-36 36 *: Available in PT, industrial crimp version. W: Available in crimp version. All insert arrangements mentioned are available in solder version. Contact us for availability of other insert arrangements. -1-3 3-55 55-61 61 Contact Legend ymbol Contact ize
All dimensions are mentioned in mm. PTOOA - 51OOA 51OORA quare flange receptacle with non environmental intermediate backshell. L R T.5.5.5.5.5.5.5.5 17.3 0.7 0.7 2.3.95.95.95.95.95.95...96.01.9.23 25. 2.5 3. 15.09.26.62 23.01.61.6 23. 2.6 3.73.7 17.9 21.6. 30.6 36.9 0.1 TECHCAL CHARACTERTC Overall dimensions PTOOA (R) - 50AC L1 PT00A (R) PTOOE (R) PT00E (R) - 50EC L2 PTOOE (R) - 51OORC } } quare flange receptacle with non-environmental or environmental cable clamp backshell. F L1 L2 R T. 7.9 9.5.7 19.1.3.5.5.5.5.5.5.5.5 17.3.2.2.2.2 6. 6. 53. 53. 55. 5 5 5 5 5. 5. 57.6 57.6 57.6.95.95.95.95.95.95...96.01.99.23 25. 2.5 3. 15.09.26.62 23.01.61.6 23. 2.6 3.73.2 23 25 2.2. 36.1 36.1 0.9 PTOOE - 51OOE PTOOE - 51OOR PTOOE L R T.5.5.5.5.5.5.5.5 17.3 37.3 37.3 37.3 37.3 37.3 37.3 1.3.95.95.95.95.95.95...96.01.99.23 25. 2.5 3. 15.09.26.62 23.01.61.6 23. 2.6 3.73.2 17..7 23.6 26.. 33 36.3 39.5 PT00E (Q) - 50RG quare flange receptacle with Q braid clamping backshell. 5 A B ØC ØD ØE F.6 23. 2.6... 25. 2.. 35. 3. 1. 6.7 9.2.2 15.2.3 23 26 2. 25 2 32 3 3 1 26 32 35 3 2 5 51.77 51.77 52.77 52.77 52.77 52.77 57.3 57.3 59 PT/51 quare flange receptacle with environmental backnut.
TECHCAL CHARACTERTC PTOOW - 50J PTOOW quare flange receptacle with environmental sealing gland backshell. H min..3 5.2.6.6 15.2.1 17. 5. 7.9 11.2 13.7 15.6 17.1 19 21.5.7 L R T.5.5.5.5.5.5.5.5 17.3 0. 1. 5. 50.3 55. 6 72.7 76. 2.5.95.95.95.95.95.95...96.01.99.23 25.0 2.5 3. 15.09.26.62 23.01.61.6 23. 2.6 3.73 13.5.7.2 23. 30.2 PTOOP - 50P PTOOP - 50RP quare flange receptacle with straight backshell for potting. H L R T.3 11.3.2 17.3.5 23.1 26.3. 32.6.5.5.5.5.5.5.5.5 17.3 9.95.95.95.95.95.95...96.01.99.23 25.1 2.5 3. 15.09.26.62 23.01.61.6 23. 2.6 3.73 15..6 21. 25 2.2.3 3.5 37.7 0.9 PT00E(J) - 50T PT00E(J) - 50RT quare flange receptacle with backnut for heatshrink moulded piece. Please contact us for dimensional characteristics. * PTO2A - PT02E - 52E PT02E - 52R PT02A quare flange receptacle without rear accessory possibility. ** Dimensions (mm) hell size. +0.25 0 +0.0-0.13 P R 13 13 13 13 13 13 17 17 17..95.95.95.95.95.95...96.02.99.23 25.0 2.5 3. 11..6 17..9.1.3 30.5 33.6 36. 15.09.26.62 23.01.61 *: For all versions except PT02A. ( or ). ±0. T ±0.1 Y*.6 23. 2.6.0 3.73 23.9 23.9 23.9 23.9 23.9 23.9.2.2.2 **: For PT02 only and dependent on contact size Z**.. 25. 25. 25. 25. 25. 25....3 2.1 2.1 2.1 2.1 2.1 2.1 33.6 6
Line mount receptacle with non-environmental intermediate backshell. L Y 35.5 35.5 35.5 35.5 35.5 35.5 1.7 1.7 2.5...... 13.59 13.59.3.01.99.23 25.0 2.5 3..6 23. 2.6.7 17.9 21.6. 30.6 36.9 39. 23.3 3. 3 39.67 2. 6.02 TECHCAL CHARACTERTC PT01A - 51A 51RA PTO1E - 51E PT01E - 51R PT01E Line mount receptacle with environmental backnut. L Y 35 35 35 35 35 35 3.5 3.5 0...... 13.59 13.59.3.01.99.23 25.0 2.5 3..6 23. 2.6 13.7.9.1 23.1 26.3.3 32.5 35. 39 23.3 3. 3 39.67 2. 6.02 PT01A(R) - 51AC PT01E(R) - 51EC PT01E(R) - 51RC PT01A(R) PT01E(R) F L Y. 7.9 9.5.7 19.1.3 9 9 9 9 5 5 5. 5. 56..95.95.95.95.95.95...96.01.99.23 25.0 2.5 3..6 23. 2.6 19. 21..6.. 35.7 35.7 0.5 23.3 3. 3 39.67 2. 6.02 PTO1W - 51J PT01W Line mount receptacle with environmental sealing gland backshell. 7 H min. L Y.3 5.2.6.6 15.2.1 17. 5. 7.9 11.2 13.7 15.6 17.1 19 21.5.7 0. 1. 5. 50.3 55. 6 72.7 76. 2.5...... 13.59 13.59.3.01.99.23 25.0 2.5 3..6 23. 2.6 13.5.7.2 23. 30.2 23.3 3. 3 39.67 2. 6.02 PT/51 Line mount receptacle with non-environmental or environmental cable clamp backshell.
TECHCAL CHARACTERTC PTO1P - 51P PT01P - 51RP Line mount receptacle with straight backshell for potting. H L Y.3 11.3.2 17.3.5 23.1 26.3. 32.6.5.5.5.5.5.5 6.5 6.5 7.3...... 13.59 13.59.3.01.99.23 25.0 2.5 3..6 23. 2.6 15..6 21. 25 2.2.3 3.5 37.7 0.9 23.3 3. 3 39.67 2. 6.02 PTO1A (PG) - 51A (PG) Line mount receptacle with straight adaptor terminated by a PG type plastic sealing gland. hell size A ØB C ØD E F PG.6 23. 2.6 2.5 à 6.5 3.5 à à 5 à 9 à 9 à 9 à 13 à 13 à 15 19 33 33.6 19.5. 25. 32 35.2 3.3 51.5 51.5 51.5 56.5 56.5 61.5 67 72 73.6 75.5 79.5 1.5.5 90.5 95.5 1 1 11 PG7 PG9 PG11 PG13.5 PG PG PG PG21 PG21 PT01E(J) - 51T PT01E(J) - 51RT Line mount receptacle with backnut for heatshrink moulded piece. R ø.5 23. 2.6 3.5 3.5 3.5 3.5 37 37 7.1 7.1 7 15.6. 23.7.5. 32 36.1 3.5 1.5 PT01E - 51E PT01-51 PT01-51 PT01E Line mount receptacle with rain proof or immersion proof sealing gland backshell with strong grip. L Joint number: please refer..01.6..99 23....23 2.6. 25.0. 2.5 13.59 13.59.3 3. to end of page 11 for dimension H Y 23.3 13.5.7.2 23. 3. 3 30.2 36.97 2. 6.02 depending on the joint E 71.5 71.5 71.5 79.5 79.5 79.5 91.5 9 95 number. 1.5 1.5 1.5 9.5 9.5 9.5 7 9.5 1
Line mount receptacle with Q braid clamping backshell. A B ØC ØD ØE F.6 23. 2.6... 25. 2.. 35. 3. 1. 6.7 9.2.2 15.2.3 23 26 2. 25 2 32 3 3 1 26 32 35 3 2 5 52.57 52.57 53.57 53.57 53.57 53.57 5.1 5.1 59. TECHCAL CHARACTERTC PT01E (Q) - 51RG PT06A - 56A 56RA traight plug with non-environmental intermediate backshell. L Q 3.5 3.5 3.5 3.5 3.5 3.5 0.1 0.1 2.2.6 21. 25. 32.2 3.9 3.5 1.7.7.7 17.9 21.6. 30.6 36.9 39. PT06A (R) - 56AC PT06A (R) L1 PT06E (R) } PT06E (R) - 56EC L2 PT06E (R) - 56RC } F L1 L2 Q. 7.9 9.5.7 19.1.3 3.5 3.5 3.5 3.5 7 7 51.2 51.2 53 51.1 51.1 51.1 51.1 5.2 5.2 55 55 56.5.6 21. 25. 32.2 3.9 3.5 1.7.7.2 21. 25 2.2. 36.1 36.1 0.9 3.3 PT06E - 56E PT06E - 56R PT06E traight plug with environmental backnut. 9 L Q 36. 36. 36. 36. 36. 36. 37.5 37.5 39.1.6 21. 25. 32.2 3.9 3.5 1.7.7.2 17..7 23.6 26.. 33 36.3 39.5 PT/51 traight plug with non-environmental or environmental cable clamp backshell.
TECHCAL CHARACTERTC PT06W - 56J PT06W traight plug with environmental sealing gland backshell. H min. H L Q.3 5.2.6.6 15.2.1 17. 5. 7.9 11.2 13.7 15.6 17.1 19 21.5.7 3.3 3.3 6.9 51. 57.3 63.1 72.2 76.2 1.5.6 21. 25. 32.2 3.9 3.5 1.7.7 13.5.7.2 23. 30.2 PTO6P - 56P PTO6P - 56RP traight plug with backshell for potting. H L Q.3 11.3.2 17.3.5 23.1 26.3. 32.6 3.5 3.5 3.5 3.5 3.5 3.5 5.6 21. 25. 32.3 3.9 3.5 1.7.7.9 17.9.9 23.7. 30.6 33. 39.9 0.1 PT06A (PG) - 56A (PG) traight plug with adaptor terminated by a PG type plastic sealing gland. øa øb.6 21. 25..0 32.2 3.9 3.5 1.7.7 øc.6 19.5. 25. 32.0 35.2 3.3 min. 2.5 3.5 5 9 9 9 13 13 6.5 D E/plats PG size 51.2 51.2 51.2 56.2 56.2 61.2 65.2 70.2 70.2 15 19 33 33 PG 7 PG 9 PG 11 PG 13.5 PG PG PG PG 21 PG 21 PT06E(J) - 56T PT06E(J) - 56RT traight plug with backnut for heatshrink moulded piece. hell ize øq L ø.6 21. 25. 32.2 3.9 3.5 1.7.7 36.2 36.2.7.7.5 15.6. 23.7.5. 32 36.1 3.5 1.5
PTG06E (Q) - 5136G PTG06E (Q) - 5136RG traight plug with Q braid clamping backshell. TECHCAL CHARACTERTC ø QG min. ø QH+0.5 QL ø Q W -0.2 6.7 51 9.2 51 23 21.2 5 15.2 25 5 30 2.3 2 5 33.0 32 5 36 3 23.0 3 56 0 37 26.0 3 56 3 1 2. 1 5 6 PT06E - 56E PT06-56 PT06-56 PT06E traight plug with rain proof or immersion proof sealing gland backshell. Q L for E L for &.6 15 71.5 1.5 21. 71.5 1.5 25. 71.5 1.5.5 79.5 9.5 32.2.5 79.5 9.5 3.9 30.5 79.5 9.5 3.5 3 91.5 5 1.7 37 9 7.5.7 0 9.5 PT/51 Joint number 1, 2 or 3 for cable exit sealing. 11 Dimension H/Acceptable cable 1 2 3 Ø (mm) Ø (mm) Ø (mm) to 5 5 to 6.5 5 to 6.5 6.5 to to 9.5 9.5 to 11.5 to to 13.5 7 to 9.5.5 to to 15.6 15 to 17 17 to 19 to 9.5 15 to 17 17 to 19 to 9.5 17 to 19 19 to 21.5.5 to.5.5 to 23 (Joint numbers 1, 2 or 3 to mention in the P/).
TECHCAL CHARACTERTC PTO7A - 57A PT07C PT07A Plain shell jam nut receptacle. R for PT07A G Cts* Cts* # #.2.2.2.2.2.2.6.6 30. 26.5 26.5 26.5 26.5 26.5 26.5.9.9 32.7 min. 6. 6. 6. L for PT07A 57A PT07C 23.7 23.7 23.7 23.7 23.7 23.7.2.2 30.9.9.9.9.9.9 26.5 26.5.3 P ± 0..01.99.23 25.0 2.5 3. 19.1.2 30.2 6 23.. 3.9 3.1 1.3 6 9.2 5 * Cts = size contacts - Cts = size contacts. PT07E - 57E PT07E - 57R PT07E Jam nut receptacle with environmental backnut. G min. 6. 6. 6. L P ± 0. 3.3 3.3 3.3 3.3 3.3 3.3 1.2 1.2 2..5.5 23.3.01.99.23 25.0 2.5 3.1 19.1.2 30.2 6 23. 3.1 1.3 6 9.2 5.5 21.7.9 2.2 3. 3. 1.5.7 PT07E (R) - 57EC PT07E (R) - 57RC PT07E (R) Jam nut receptacle with non-environmental or environmental cable clamp backshell. F. 7.9 9.5.7 19.1.3 G min. 6. 6. 6. L P ± 0. 9.5 9.5 9.5 9.5 52.6 52.6 5.95 5.95 5.2.5.5 23.3.01.99.23 25.0 2.5 3.95 3.1 19.1.2 30.2 6 23.. 3.9 3.1 1.3 6 9.2 52.5 19. 21..6.. 35.7 35.7 0.5 2.1
Jam nut receptacle with straight backshell for potting. G min. 6. 6. 6. H L P ± 0..3 11.3.2 17.3.5 23.1 26.3. 32.6 39.9 39.9 39.9 39.9 39.9 39.9 7.1 7.1 7.9.5.5 23.3.01.99.23 25.0 2.5 3.1 19.1.2 30.2 6 25.. 3.9 3.1 1.3 6 9.2 5 15..6 21.7 25 2.2.3 3.5 37.3 0.9 TECHCAL CHARACTERTC PT07P - 57P PT07P - 57RP PT07E (Q) Jam nut receptacle with Q braid clamping backshell. hell size ø QG min. ø QH +0.5 QL J 0-0.25 ±0.5 ±0.13 6.6 9.2.2 15.2.3.0 23.0 26.0 2. 25 2 32 3 3 1.. 51. 51. 51. 51. 56. 56. 5.0 13.6.6.7 23.93.0 30.25 33.3 36.60 3.0 3.0 3.0 3.0 3.0 3.0 3. 3. 3. 17.6 17.6 17.6 17.6 17.6 17.6.5.5 23.39 P (Panel thickness) min. Torque value for jam nut. Connector size ax. torque (m.) 2,5 5 7 9 11 13 PT/51 PT0E (R) - 5EC PT0E (R) - 5RC PT0A (R) PT0E (R) Right angle plug with environmental cable clamp backshell. 13 B.6 19.6 23 25.. 32.1 C min..3.3 6.7 7.. 11.2.9 13.7 6.6 9. 9.6 13..2 17. 19.6 21. 23. D E L Q.5 19.5 19.5 26.5 32 3 35.5.6 11. 1. 15. 17.3..2 53 55 5 61 65 69 71 72 7.6 21. 25. 32.2 3.9 3.5 1.7.7
TECHCAL CHARACTERTC PT0P - 5P PT0P - 5RP 75 degree angle plug with backshell for potting. hell size ØA P B P C D.6 21. 25. 32.2 3.9 3.5 1.7.7 0.9. 6.7.3 9.3 50.3 57. 5. 67. 7.2 50.7 53.1 5.7 55.6 56.7 60.9 69.0 70.6 7.32.92.5.1 13.7 15..7.5.05 7.9x11.1 11.1x.3 13.1x17.5 x19..7x.6 17.9x25. 19.5x2.6.6x.3 23.3x3.9 PT09A 59E quare flange receptacle with locking ring. ø A B ± 0.3 C + 0.5 +0 D ± 0. E + 0.7-0.9 F ± 0.3 G ± 0. ø H ± 0.1.6 21. 25. 32.2 3.9 3.5 1.7.7 9 9 9 9 9 9.5.5.5 21 21 21 21 21 21.9.9 26.5 19.5 19.5 19.5 19.5 19.5 19.5.6.6.1.......6 23. 2.6 15.09.26.62 23.01.61 3.7 PTB 51B Thru bulkhead receptacle. L P R T 19. 19. 19. 26.67 26.67 26.67 26.67 26.67 26.67...... 17. 17. 17..01.99.23 25. 2.5 3. 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 15.09.26.62 23.01.61.6 23. 2.6 3.73
PT02Y/52Y PT02G PT02Y/52Y PCB receptacles PT07Y/57Y PT07G PT07Y/57Y PCB receptacles TECHCAL CHARACTERTC PCB contacts Custom designed flexible circuit possibility. Please consult us. PCB contacts PT02W - 52W Wire wrap receptacles PT07W - 57W Wire wrap receptacles Wire wrap contacts Wire wrap contacts A B C D H L2 L L(Y) L(G) L(Y) ize +0.25 min. ±0.3 +0.3 ±0.6 +1.05 +0.02 0-0.5-1.17-0.13.95 13 11. 6.35 3.17 17..35 15.0 15.0.3.02.95 13.6 6.35 3.17 17..35 15.0 15.0.3.99.95 13 17. 6.35 3.17 17..35 15.0 15.0.3.95 13.9 6.35 3.17 17..35 15.0 15.0.3.23.95 13.1 6.35 3.17 17..35 15.0 15.0.3 25.0.95 13.3 6.35 3.17 17..35 15.0 15.0.3 2.5. 17 30.5.7 6.35 17..1 15. 17.1 17. 23.1. 17 33.6.7 6.35 17..1 15. 17.1 17. 23.1.96 17. 36..7 6.35.6 15.3..2 17.07 23.9 3. T(Y) T(G) T(Y) U(Y) U(G) U(Y) V(Y) V(G) V(Y) ize +0.2 ±0.1 +0.2 +0 ±0.03 +0.1 ±0.9 ±1.25-0 -0-0.1-0 3.5 7 0.7 0.65 0.6.6 6..1 3.5 7 0.7 0.65 0.6.6 6..1 3.5 7 0.7 0.65 0.6.6 6..1 3.5 7 0.7 0.65 0.6.6 6..1 3.5 7 0.7 0.65 0.6.6 6..1 3.5 7 0.7 0.65 0.6.6 6..1 3.5 7 0.7 0.65 0.6 5.0 7.2 9.32 3.5 7 0.7 0.65 0.6 5.0 7.2 9.32 3.5 7 0.7 0.65 0.6 5.0 6.5. Please consult us for PCB drilling dimensions PT/51 15 Panel drilling 00 helltype: rear or front panel mounting 02 hell type: rear panel mounting 02 hell type: front panel mounting 07 hell type: rear panel mounting hell C D E F H R size min. +0 +0.3 +0-0.3-0 -0.3.3 13.5 13. 3.5 15. 17.3.2 17 3.5.26 21. 19..5 21.1 3.5.62 25.5 25.6.3 3.5 23.01 2.1 25.7 2..5 3.5.61.3 32 30.7 3.5 3.5 32.1 35.2 33.9 3.5 37.7 35.2 3.3 37.1 3.5 0.9 3. 1.5 0 3.92
ACCEORE-TOOLG Hermetic receptacles Hermetic receptacles are available in three different shell types: square flange receptacle without rear accessory possibility, plain shell jam nut receptacle and solder mounting receptacle. General characteristics hells in steel with tin plating finish Glass insert Pin contacts in nickel alloy with tin plated solder pot termination Temperature range: -55 C to +5 C Hermeticity: Leak -6 cm3. s-1 under 1 bar differential pressure Vibration: exceeds L-E-52 proc. Physical shock: 0 G s Current rating per contact: size pin: 5A / size pin: A Dielectric withstanding voltage (sea level): 1500 Vrms 60 cps service rating / 2300 Vrms 60 cps service rating Overall dimensions quare flange receptacle without rear accessory possibility PT02H - 52H older mounting receptacle PTH - 51H Jam nut receptacle PT07H - 57H hell A B1 B2 B3 ØC1 size ±0.13 ±0.13 ±0.13 ±0.15 0 hell size 0 21.03 21.03 21.03 21.03 21.03 21.03.61.61.61 2.36 2.36 2.36 C3 D1 E1 min. F1 F2 F3 G1 ±0.13 ±0.13 ±0.13 ±0.05 ØG2 23.93.. 35.05 3.23 1.0 6.15 9.33 52.50 15.09.26.62 23.01.61 3.92 3. 3. 11.25 11.25 11.25 11.25 11.25 11.25.25.25 15.06. 17.07 19. 23.01 26.19 3. 2.39 2.39 2.39 2.39 2.39 2.39 3. 3. 3..62 23.0 26.19 2.5 30.9 2 0 39.67 2.5.00 19. 21.56.7.91.06 33.5 36.65 39.0 J1 J2 1 ±0.13 ±0.13 ±0.13 3 + -0 L3 +0-0.25 3 3 ØR2 ØR3 +0 ±0.13 ±0.13 ±0.13-0.13 min..91.91.91.91.91.91 17. 17..0.23 30.15 2 0 39.67 2.5 6.02 13.39.56.70 23.5.00 30. 5 3 0 3.52 3.9 2.06 5..03 51.59 5.76 57..91.91.91.91.91.91. 17.30. 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 0.91 ØC2.3 17.65 21.95 25. 2..5 3.62 37.0 1.02 13.72.9 21.03..33 30.51 33.6 36.6 0.03.6 17.5. 23.2 26.59.77 32. 35. 3.51.53 0. 25.65 2.3 32.00 35. 3.35 1.53.2.2.2.2.2.2.0.0 13 17.93 17.93 17.93 17.93 17.93 17.93.71.71 23.55. 17.02 19.79.96 26...70 3.7 3.05 Thread X3 Class 2A 0.5625-0.675-0.750-1.0000-1.50-1.2500-1.3750-1.5000-250- EF EF EF EF EF EF EF EF EF Y ±0. 11.96.9 19.00.17 25.35 2.52.70 3.7 3.05
How to choose your screened backshell? The use of screened E-RF backshells implies that the electrical continuity and screening must be well-kept between connectors. n this way, mobile plugs may be equipped with grounding fingers. Please find below the screened backshell corresponding to your application: PTA backshells (Amphenol ocapex design): Compatible with the crimp and solder models and in 33, & 55 shell types (see end of page ) High E-RF protection level Clamping braid backshell by screwing system with free inner ring to avoid twisting of the braid during screwing Environmental when equipped with straight or right angled heatshrink moulded pieces mentioned on page 19 Easy in use, no tooling required Ordering information: order the connector body with the help of page (Amphenol particular designation) and the corresponding PTA backshell with the help of page 23 (Amphenol particular designation) EX: PTG55E-5P + PTA1 TECHCAL CHARACTERTC PTA alone 55 shell type + PTA 33 or shell types + PTA * aximal external diameter of acceptable cable. - ** aximal thickness of braid. R: Dimension on flat ( flats). - Please consult us for cabling information. hell A B C D E F P R size ±0.2 6.9 36.2 23 1 5 50.7..9 9.6 36.2 23 1 5 50.7. 26.1.7 36.2 23 1 5 51.2. 25.3. 3.2 25 1 60 5 25. 32 2.5 3.2 25 1.1 60 53.. 35.5 19.9 39.2 26 1.2 61 53.. 3 3.7 23.1 36.3 23.1 1.25 62 6 35. 2 37.9 36.3 23.1 1.25 62 6 3. 5 1 2. 36.3 23.1 1.25 6 70.6 1. Q backshells (in accordance with VG9532 tandard): Compatible with crimp contacts version and in 00, 01, 07 & G06 shell types High E-RF protection level Clamping braid backshell by screwing system Environmental when equipped with straight or right angled heatshrink moulded pieces mentioned on page 19 Easy in use, no tooling required Ordering information: order the connector equiped with the Q backshell with the help of page EX: PTG06E-Q (Please consult us for cabling information) PT06G / PT0G backshells (Amphenol ocapex design): Compatible with solder contacts version and in 06 & 0 shell types Outstanding E-RF protection level oldering braid backshell (the rear part of the backshell is tin-plated to allow soldering of the braid) Available in straight or right angle version (low profile) Environmental when equipped with heatshrink sleeves mentioned on page 19 Ordering information: order the connector equipped with the backshell with the help of page EX: PT06G-55P PT/51 17 Plug ❶ - traight Plug PT06G ❷ - Right angle Plug PT0G shell ØA B C ØD* E ØA B F H ØJ* Ø size ±0.3 ±1 ±0.3 ±1.6 9 37.2 9 21. 9 2 6 7.5 21. 9 35 17 25. 9.. 13. 25. 9 33 17 9. 15. 9 3.5 19.5 32.2 9.5 15 17.5 32.2 9 36. 3.9 9 5.5. 13. 3.9 9 1 3.5.5 63 17 3.5.5 6.5 26.5 1.7.5 63 19 1.7.5 32 *D and J: diameter of the wire unsacketed and without braid. Please consult us for cabling information.
HOW TO ORDER Accessories Protective caps Protective cap for 06,0 shell types. Protective cap for 00,01,02,07 shell types Termination of the cord (or metallic chain) for 07 shell types protective caps. Termination of the cord (or metallic chain) for 00,02 shell types protective caps. Termination of the cord for 06, 0, 01 shell types protective caps. (* There is no termination on the metallic chain for 06, 0, 01 shell types protective caps). The length of the cord (or metallic chain) from the protective cap to the cord extremity (or metallic chain extremity) is 0 mm long for 01, 06, 0 shell types protective caps and 5 mm long for 00, 02, 07 shell types protective caps. CAP eries Connector size C Dimensions (mm) ØD ØF L 21 17.9.7 25. 2.7.9 3.7 3 1.2.3 B ER 0.7 17.9.6 25. 32.2 35.3 3.5 1.7.2.2.2.2.2.2 19. 19..6 + 0.02-0.13.01.99. 25.0 2.57 3.92 3. Protective cap type: F: For plugs and screw type receptacle (06, 0, 09 shell types) EC: For square flange receptacle and thru bulkhead receptacle (00, 02, B shell types) ER: For jam nut receptacle (07 shell type) P: For line mount receptacle (01 shell type) Wire type: : ylon cord, standard version Blank for etallic chain PT: For plugs and screw type receptacle (06, 0, 09 shell types) - except for metallic chain Omit for all other versions and for metallic chain Corresponding connector shell size: 0,,,,,,,, Finish: Blank for olive-drab cadmium plated (standard version) 01: Bright cadmium plated (standard version for PT connectors) 02: Black anodised - ROH compliant 07: Electroless nickel plated - ROH compliant Please consult us for other dimensional characteristics (dimensions of connectors with caps mated). ut ring for square flange receptacle implifies the fixing of square flange receptacle on the panel by eliminating loose nuts and washers, particularly recommended when installation process occurs in reduced volume. (Compatible with 00 and 02 shell types). (Retainer material in aluminium alloy:. ±0,0 mm / uts in cadmium plated steel). hell size P/ FU- FU- FU- FU- FU- FU- FU- FU- FU- T thread UJC-3B.0.0.0.0.0.0.0.0 6.32 A ±0.02 15.09.26.62 23.01.61 B C D E ±0.0 +0.0/-0 ±0.60.35.07 2.69/. 7.2 25. 17. 2.69/. 11.00.9 21.03 2.69/. 13.36 30.2.21 2.69/. 15.75..79 2.69/. 17.35 3. 30. 2.69/. 19.71 3. 33.15 2.69/. 21.97 0.6 36. 2.69/. 23.0.5 39.62 3./.65 25.0
Dummy receptacles, panel gaskets, plastic dust caps hell Dummy quare flange Plastic dust caps Plastic dust caps for size receptacles receptacle panel gaskets for plug receptacle (thickness 0.6 mm) FE 0 JE 0 05 05 11 FE JE 05 13 05 FE JE 606 06 05 13 FE JE 606 073 05 FE JE 606 066 05 15 FE JE 606 067 05 FE JE 606 06 05 17 FE JE 606 069 05 FE JE 606 079 606 069 HOW TO ORDER Contacts and contact accessories (Crimp contacts are delivered with the connector in PT and PT series and are mentioned here as spare parts). Designation PT or 51 series PT series ize pin contacts (from to shell sizes) 00600 00650 ize pin contacts (from to shell sizes) 00600 00651 ize socket contacts (from to shell sizes) 00615 0065 ize socket contacts (from to shell sizes) 00615 00655 ize pin contacts (from to shell sizes) 006 00660 ize pin contacts (from to shell sizes) 006 00661 ize socket contacts (from to shell sizes) 00635 0066 ize socket contacts (from to shell sizes) 00635 00665 Reducing sleeve for size contacts 00609 006 Reducing sleeves for size contacts - 006 ealing plug size 900021 (red) 900021 (red) ealing plug size 9000 (blue) 9000 (blue) Heatshrink moulded pieces or sleeves for rear accessories Heatshrink moulded pieces compatible with following rear accessories: Q, J (backshells delivered with the connector) / PTA (backshell delivered separately). traight piece 01 02 03 03 05 05 07 07 09 Right angle piece 02 0232 0233 0233 0235 0235 0237 0237 0239 Heatshrink sleeves compatible with PT06G and PT0G connectors traight piece 01 02 03 03 05 06 06 06 Right angle piece - 0213 0213 02 02 02 02 02 19 Tooling Designation Amphenol ocapex P/ ilitary P/ Crimping pliers for PT/51/PT series 0957 5/1-01 Turret for pliers 0957 and PT/51 series contacts 0961 5/1-02 Turret for pliers 0957 and PT series contacts 21770 - etallic contact insertion tool for PT/51 size contacts 09709 - etallic contact insertion tool for PT/51 size contacts 0973 - etallic contact removal tool for PT/51 size contacts (front release) 097 - etallic contact removal tool for PT/51 size contacts (front release) 09711 - Termination of PT/51 size contacts removal tool (spare part) 09753 - Termination of PT/51 size contacts removal tool (spare part) 09773 - etallic contact insertion tool for PT size contacts 390 - etallic contact insertion tool for PT size contacts 60 - etallic contact removal tool for PT size P contacts (front release) 097 - etallic contact removal tool for PT size OCET contacts (front release) 09730 - etallic contact removal tool for PT size P contacts (front release) 097 - etallic contact removal tool for PT size OCET contacts (front release) 09732 - Tools for rear accessories Designation Amphenol ocapex P/ ilitary P/ Pliers for PT/51/PT series rear accessories tightening 097 - Tightening support for plug rear accessories 09717 - (all sizes dummy receptacles on a chassis) PT/51
HOW TO ORDER APHEOL DEGATO OLDER, CRP, PCB, WRE WRAP VERO, COECTOR WTH REAR ACCEORY PT eries PT 00 E P hell type: 00: quare flange receptacle with rear accessory possibility (see p.5/6) 01: Line mount receptacle (see p.7/) 02: quare flange receptacle without rear accessory possibility (see p.6/15/) 06: traight plug (see p.9//11) 07: Jam nut receptacle (see p./13/15/) 0: Right angled plug (see p.13/) 09: quare flange receptacle with locking ring (see p.) : older mounting receptacle (hermetic version) (see p.) B: Thru bulkhead receptacle (see p.) G06: traight plug with grounding fingers for braid clamping backshell (see below: rear accessory particularity) (see p.11) ervice class and rear accessory capability: older version: A: on-environmental intermediate backshell (for 00, 01, 06 shell types) or no rear accessory (standard version for 02, 09 and plain shell 07 shell types) A (R): on-environmental cable clamp backshell (for 00, 01, 06, 07 shell types) C: Air leakage controlled, no rear accessory (for 02 and plain shell 07 shell types) E: Environmental backnut (for 00, 01, 06, 07 shell types) or no rear accessory (for 02 shell type) E (R): Environmental cable clamp backshell (for 00, 01, 06, 07, 0 shell types) G: With grounding fingers and braid soldering backshell (for 06, 0 shell types but not available in size for 0 shell type and size for 06 and 0 shell types). P: Backshell for potting (straight for 00, 01, 06, 07 shell types and 75 angle for 0 shell type) W: Environmental sealing gland backshell (for 00, 01, 06 shell types) H: Hermetic version, no rear accessory possibility (for 02, 07 and shell types) E(X)*: mmersion proof sealing gland backshell with strong cable grip (for 01, 06 shell types) (X)*: Rain proof sealing gland backshell with strong cable grip and earth line (for 01, 06 shell types) Crimp version: E: Environmental backnut (for 00, 01, 06, 07 shell types and for 02 shell type without backnut) E(R): Environmental cable clamp backshell (for 00, 01, 06, 07, 0 shell types) P: Backshell for potting (straight for 00, 01, 06, 07 shell types and 75 angle for 0 shell type) (X)*: mmersion proof sealing gland backshell with strong cable grip (for 01, 06 shell types) Other versions: W: Wire wrap (for 02 and plain shell 07 shell types) Y/Y/G: PCB version (for 02 and plain shell 07 shell types) Blank: for thru bulkhead receptacle : //////// Contact insert arrangement: ee page Contact type: P: Pin : ocket P: For thru bulkhead receptacle Coding / nsert alternate positioning: Blank for normal or W, X, Y, Z. ee coding system page 3 Rear accessory particularity: R: With strain relief clamp (for A, E, E service classes) PG: With straight adaptor terminated by a PG type plastic sealing gland (for 06, 00, 01 shell types / A service class) Q: With environmental backshell for screen termination and heatshrink moulded piece (for 00, 01, 07, G06 shell types / E service class) J: With environmental backnut for heatshrink moulded piece (for 00, 01, 06 shell types / E, E service classes) Omit for all other versions hell finish: Omit for standard olive drab cadmium plate over nickel. Hermetic connectors are all supplied with tin plated shells. 01: Bright cadmium plated 02: Black anodised - ROH compliant 023: Electroless nickel - ROH compliant * : Replace "X" after E, or by the number of the corresponding joint (refer to end of page 11). : PT02E & PTO2A designations are equivalent.
BAE F. L55 DEGATO OLDER, CRP, PCB, WRE WRAPP VERO, COECTOR WTH REAR ACCEORY 51 eries 51 00 EC hell type: 00: quare flange receptacle with backshell possibility (see p.5/6) 01: Line mount receptacle (see p.7/) 02: quare flange receptacle without rear accessory possibility (see p.6/15/) 06: traight plug (see p.9//11) 07: Jam nut receptacle (see p./13/15/) 0: Right angle plug (see p.13/) 09: quare flange receptacle with locking ring (see p.) i: older mounting receptacle (hermetic version) (see p.) B: Thru bulkhead receptacle (see p.) 36: traight plug with grounding fingers for braid clamping backshell (see p. 11) ervice class and rear accessory capability: older version: A: on-environmental intermediate backshell (for 00, 01, 06 shell types) A: tandard version for 07 shell type (no rear accessory) AC: on-environmental cable clamp backshell (for 00, 01, 06 shell types) E: Environmental backnut (for 00, 01, 06, 07 shell types) E: tandard version for 02, 09 shell types (no rear accessory) EC: Environmental cable clamp backshell (for 00, 01, 06, 07, 0 shell types) J: Environmental sealing gland backshell (for 00, 01, 06 shell types) P: Backshell for potting (straight for 00, 01, 06, 07 shell types and 75 angle for 0 shell type) T: Environmental backnut for heatshrink moulded piece (for 00, 01, 06 shell types) G: Environmental backshell for screen termination and heatshrink molded piece (for 36 shell type) H: Hermetic versions, no rear accessory possibility (for 02, 07 and shell types) E(X)*: mmersion proof sealing gland backshell with strong cable grip (for 01, 06 shell types) (X)*: Rain proof sealing gland backshell with strong cable grip and earth line (for 01, 06 shell types) Crimp version: R: Environmental backnut (for 00, 01, 06, 07 shell types and for 02 shell type without backnut) RA: Environmental intermediate backshell (for 00, 01, 06 shell types) RC: Environmental cable clamp backshell (for 00, 01, 06, 07, 0 shell types) RP: Backshell for potting (straight for 00, 01, 06, 07 shell types and 75 angle for 0 shell type) RT: Environmental backnut for heatshrink moulded piece (for 00, 01, 06 shell types) RG: Environmental backshell for screen termination and heatshrink molded piece (for 00, 01, 07, 36 shell types) (X)*: mmersion proof sealing gland backshell with strong cable grip (for 01, 06 shell types) Other versions: W: Wire wrap (for 02 and plain shell 07 shell types) Y/Y/G: PCB version (for 02 and plain shell 07 shell types) Blank: for thru bulkhead receptacle P 50 HOW TO ORDER : //////// Contact insert arrangement: ee page Contact type: P: Pin : ocket P: For thru bulkhead receptacle PT/51 Coding / nsert alternate positioning: Blank for normal or W, X, Y, Z. ee coding system page 3. Rear accessory particularity: PG: With straight adaptor terminated by a PG type plastic sealing gland (for 00, 01, 06 shell types / A service class) Omit for all other versions 21 50: Obligatory suffix Finish: Blank for standard olive drab cadmium plate over nickel. Hermetic connectors are all supplied with tin plated shells. 01: Bright cadmium plated 02: Black anodised - ROH compliant 70: Electroless nickel - ROH compliant * : Replace "X" after E, or by the number of the corresponding joint. Refer to end of page 11 to define this number.
REFERECE APHEOL DEGATO CRP VERO FOR DUTRAL APPLCATO, COECTOR WTH REAR ACCEORY PT eries PT 00 E P hell type: 00: quare flange receptacle with backshell possibility (see p.5/6) 01: Line mount receptacle (see p.7/) 02A: quare flange receptacle without rear accessory possibility 06: traight plug (see p.9//11) 07: Jam nut receptacle (see p.) 0: Right angled plug (see p./9) ervice class and backshell capability: A (R): on-environmental cable clamp backshell (for 00, 01, 06, 07 shell types) E: Environmental backnut (for 00, 01, 06, 07 shell types) E (R): Environmental cable clamp backshell (for 00, 01, 06, 07, 0 shell types) W: Environmental sealing gland backshell (for 00, 01, 06 shell types) E(x)*: mmersion proof sealing gland backshell with strong cable grip (for 01, 06 shell types) : //////// Contact insert arrangement: ee page Contact type: P: Pin : ocket Coding / insert alternate positioning: Blank for normal or W, X, Y, Z. ee coding system on page 3 Rear accessory particularity: R: With strain relief clamp (for A, E service classes) PG: With straight adaptor terminated by a PG type plastic sealing gland (for 06, 00, 01 shell types / A service class) hell finish: Blank for bright cadmium plated 023: Electroless nickel - ROH compliant APHEOL PARTCULAR DEGATO OLDER, CRP VERO, COECTOR BODY OLY WTHOUT REAR ACCEORY PT eries PT G 55 A P G: With grounding fingers (for 55 plug bodies only) Omit for standard version 55 or 06: Plug body with serrations* (for braid backshells or right angle strain relief clamp). Consult us for dimensional information 05: Plug body without serrations* (for straight backshell) : n-line receptacle style with serrations* 33: 00 square flange receptacle style with serrations* A: older version E: Crimp version Connector shell size: //////// Contact insert arrangement: ee page Contact type: P: Pin : ocket Coding / insert alternate positioning: Blank for normal or W, X, Y, Z. ee coding system page 3 Finish: Omit for standard olive drab cadmium plate over nickel 01: Bright cadmium plated 02: Black anodised - ROH compliant 023: Electroless nickel - ROH compliant Please consult us for dimensional characteristics. *serrations: 360 accessories orientation teeth.
APHEOL PARTCULAR DEGATO PTA CREEED CLAPG BRAD BACHELL ACCEPTG HEATHR OULDED PECE FOR G55,, 33 CO- ECTOR BODE ETOED O PREVOU PAGE PTA eries PTA 1 REFERECE 23 Backshell size corresponding to connector body shell size: /////// 1: Corresponding to standard braid thickness Finish: Omit for standard olive drab cadmium plate over nickel 01: Bright cadmium plated 07: Electroless nickel - ROH compliant Dimensional characteristics, mentioned on page 17. Consult us for other dimensions. Cross references chart (all mentioned markings are available from Amphenol ocapex). Olive drab-cadmium plated / older, crimp, PCB, wire wrap versions and hermetics. Amphenol BAE F. L55 FC93 il-c-262g er. VG9532 PT00Axx-xx x * 50Axx-xx x * 50 HE301B00Axx-xx x * 1A PT00Axx-xx x * R 50ACxx-xx x * 50 HE301B00ACxx-xx x * 1A PT00Axx-xx x * PG PT00Cxx-xx x * 50Axx-xx x * PG50 PT00Exx-xx x * 50Exx-xx x * 50 HE301B00Exx-xx x * 1A Exx-xx x * PT00Exx-xx x * R 50ECxx-xx x * 50 HE301B00ECxx-xx x * 1A Fxx-xx x * PT00Exx-xx x * J 50Txx-xx x * 50 PT00Pxx-xx x * 50Pxx-xx x * 50 HE301B00Pxx-xx x * 1A Pxx-xx x * PT00Wxx-xx x * 50Jxx-xx x * 50 HE301B00Jxx-xx x * 1A PT00Exx-xx x * 50Rxx-xx x * 50 HE301B00Rxx-xx x * 1A Exx-xx x * VG9532Axx-xx x * PT00Exx-xx x * R 50RCxx-xx x * 50 HE301B00RCxx-xx x * 1A Fxx-xx x * VG9532Bxx-xx x * PT00Exx-xx x * J 50RTxx-xx x * 50 PT00Pxx-xx x * 50RPxx-xx x * 50 HE301B00RPxx-xx x * 1A Pxx-xx x * PT01Axx-xx x * 51Axx-xx x * 50 HE301B01Axx-xx x * 1A PT01Axx-xx x * R 51ACxx-xx x * 50 HE301B01ACxx-xx x * 1A PT01Axx-xx x * PG 51Axx-xx x * PG50 PT01Exx-xx x * 51Exx-xx x * 50 HE301B01Exx-xx x * 1A 11Exx-xx x * PT01Exx-xx x * R 51ECxx-xx x * 50 HE301B01ECxx-xx x * 1A 11Fxx-xx x * PT01Exx-xx x * J 51Txx-xx x * 50 PT01E(x)xx-xx x * 51E(x)xx-xx x * 50 PT01(x)xx-xx x * 51(x)xx-xx x * 50 PT01Pxx-xx x * 51Pxx-xx x * 50 HE301B01Pxx-xx x * 1A 11Pxx-xx x * PT01Wxx-xx x * 51Jxx-xx x * 50 HE301B01Jxx-xx x * 1A PT01Exx-xx x * 51Rxx-xx x * 50 HE301B01Rxx-xx x * 1A Exx-xx x * PT01Exx-xx x * R 51RCxx-xx x * 50 HE301B01RCxx-xx x * 1A Fxx-xx x * PT01Exx-xx x * J 51RTxx-xx x * 50 PT01(x)xx-xx x * 51(x)xx-xx x * 50 PT01Pxx-xx x * 51RPxx-xx x * 50 HE301B01RPxx-xx x * 1A Pxx-xx x * PTHxx-xx x* PT02Axx-xx x * PT02Cxx-xx x * PT02Exx-xx x * 52Exx-xx x * 50 HE301B02Exx-xx x * 1A Exx-xx x * VG9532Hxx-xx x * PT02Exx-xx x * 52Rxx-xx x * 50 HE301B02Rxx-xx x * 1A Exx-xx x * VG9532Cxx-xx x * PT02Hxx-xx x * PT02Wxx-xx x * 52Wxx-xx x * 50 PT02Yxx-xx x * 52Yxx-xx x * 50 PT02Yxx-xx x * 52Yxx-xx x * 50 PT02Gxx-xx x* 52Gxx-xx x* 50 PT/51
OTE Amphenol BAE F. L55 FC93 PT06Axx-xx x * 56Axx-xx x * 50 HE301B06Axx-xx x * 1A PT06Axx-xx x * R 56ACxx-xx x * 50 HE301B06ACxx-xx x * 1A il-c-262g er. PT06Axx-xx x * PG 56Axx-xx x * PG50 PT06Exx-xx x * 56Exx-xx x * 50 HE301B06Exx-xx x * 1A Exx-xx x * PT06Exx-xx x * R 56ECxx-xx x * 50 HE301B06ECxx-xx x * 1A Fxx-xx x * PT06Exx-xx x * J 56Txx-xx x * 50 PT06E(x)xx-xx x * 56E(x)xx-xx x * 50 PT06(x)xx-xx x * 56(x)xx-xx x * 50 HE301B06Pxx-xx x * 1A Pxx-xx x * VG9532 PT06Wxx-xx x * 56Jxx-xx x * 50 HE301B06Jxx-xx x * 1A PT06Exx-xx x * 56Rxx-xx x * 50 HE301B06Rxx-xx x * 1A 36Exx-xx x * PT06Exx-xx x * R 56RCxx-xx x * 50 HE301B06RCxx-xx x * 1A 36Fxx-xx x * PT06Exx-xx x * J 56RTxx-xx x * 50 VG9532xx-xx x * VG9532Jxx-xx x * PT06(x)xx-xx x * 56(x)xx-xx x * 50 PT06Pxx-xx x * 56RPxx-xx x * 50 HE301B06RPxx-xx x * 1A PT07Axx-xx x * 57Axx-xx x * 50 HE301B07Axx-xx x * 1A PT07Axx-xx x * R 57ACxx-xx x * 50 HE301B07ACxx-xx x * 1A PT07Exx-xx x * 57Exx-xx x * 50 HE301B07Exx-xx x * 1A Exx-xx x * PT07Exx-xx x * R 57ECxx-xx x * 50 HE301B07ECxx-xx x * 1A Fxx-xx x * 36Pxx-xx x * PTG06Exx-xx x * Q VG9532xx-xx x * PT07Cxx-xx x * PT07Pxx-xx x * 57Pxx-xx x * 50 HE301B07Pxx-xx x * 1A Pxx-xx x * PT07Exx-xx x * 57Rxx-xx x * 50 HE301B07Rxx-xx x * 1A Exx-xx x * VG9532Dxx-xx x * VG9532Exx-xx x * PT07Exx-xx x * R 57RCxx-xx x * 50 HE301B07RCxx-xx x * 1A Fxx-xx x * PT07Pxx-xx x * 57RPxx-xx x * 50 HE301B07RPxx-xx x * 1A Pxx-xx x * PT07Exx-xx x * Q PT07Hxx-xx x * VG9532Txx-xx x * 57Hxx-xx x * 50 PT07Wxx-xx x * 57Wxx-xx x * 50 PT07Yxx-xx x * 57Yxx-xx x * 50 PT07Yxx-xx x * 57Yxx-xx x * 50 PT07Gxx-xx x * 57Gxx-xx x * 50 PT0Exx-xx x * R 5ECxx-xx x * 50 HE301B0ECxx-xx x * 1A PT0Pxx-xx x * 5Pxx-xx x * 50 HE301B0Pxx-xx x * 1A PT0Exx-xx x * R 5RCxx-xx x * 50 HE301B0RCxx-xx x * 1A PT0Pxx-xx x* 5RPxx-xx x* 50 HE301B0RPxx-xx x * 1A PT09Axx-xx x* 59Exx-xx x* 50 PTBxx-xx xx * 51Bxx-xx xx * 50 xx - xx x * HELL ZE ERT ARRAGEET Do not hesitate to contact us for further information ERT ALTERATE POTOG COTACT TYLE A mphenol Amphenol ocapex il/aero & ndustrial Business Unit 9, Promenade de l Arve - BP F - 71 Thyez Cedex Tel.: +33 (0) 50 9 2 00 - Fax: +33 (0) 50 96 19 1 http://www.amphenol.com ales office Tel.: +33 (0) 1 9 05 30 00 - Fax: +33 (0) 1 9 05 30 3 The information given in this document is as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. 56Pxx-xx x * 50 E1/F PT06Pxx-xx x * édiasquare +33 (0) 1 6 36 36 PT06Gxx-xx x *