//7 TECH DATA SHEET 49 W Range Solder Ring Fittings Size Pk Pk Code MERCIA W RANGE SOLDER RING FITTINGS GENERAL RANGE Fittings are manufactured from and alloy Available in sizes from 8-4mm Fittings are designed for jointing tubes to BS EN 7 in hot and cold water services, in small bore and minibore central heating, low pressure steam heating, and in vented and unvented closed circuit heating systems WRAS approved. Manufactured to BS EN 4 Part Size Pk Pk Code MSR6 Reducer larger end for insertion into fitting MSR Elbow x MSRS Street elbow female x male for insertion into fitting x x x mm x mm 8 x mm 8 x 3 x mm 3 x 3 x 4 x mm 4 x 4 x 4 x 3mm 4 x mm 4 x 4 x 4 x 3mm 4 x mm mm 3mm 4mm mm 6 6 6 6 6 6 99 994 996 9 9 94 96 97 98 99 9 9 9 93 94 9 96 97 966 968 9 99 9 9 94 96 938 93 93 MSR Straight coupling x mm mm 3mm 4mm 9 93 9 9 9 93 934 93 MSR3 Male elbow x BSP taper male thread mm x /" 9333 MSRIM Slip coupling adaptor. Imperial x metric x. To connect imperial tube to metric tube /" x mm 3/4" x 9 9 MSRR Reducing coupling x x x x mm x mm 8 x 97 98 99 963 966 MSR Backplate elbow x BSP parallel female thread. Triangular backplate three hole fixing mm x /" 936 MSR Straight coupling, slip pattern x mm 937 938 MSR Elbow obtuse x mm 3mm 4mm 6 94 94 944 946 947 948 MSR Straight female connector x BSP parallel female thread mm x /" x 3/4" x " 99 99 993 MSR4 Equal tee all ends for mm mm 3mm 4mm 8 9443 9 94 946 9464 9466 9467 MSR3 Straight male connector x BSP taper male thread mm x /" x 3/4" x " 3mm x./4" x./" 4mm x " 94 96 98 99 9 9
Size Pk Pk Code Size Pk Pk Code MSR Tee, reduced branch all ends for x x mm 8 x 8 x mm 8 x 8 x 3 x 3 x mm 3 x 3 x 3 x 3 x 4 x 4 x mm 4 x 4 x 4 x 4 x 4 x 4 x 3mm 4 x 4 x mm 4 x 4 x 4 x 4 x 4 x 4 x 3mm 4 x 4 x 949 949 9494 9496 9497 9498 9499 9 9 9 93 94 9 96 97 MSR64 Bent union adaptor x BSP union nut. Cone joint to BS MSR68 Union adaptor x BSP union nut. Cone joint to BS x " 973 x " 9784 MSR6 Tee, one end reduced all ends for x x 8 x x 8 x x 9 9 94 MSR7 Tee, one end and branch reduced all ends for x x mm 8 x x mm 8 x x 9 936 938 MSR8 Tee, both ends reduced all ends for MSR Female tee ends x BSP parallel female branch x x 9 x mm x /" 98 E Range End Feed Fittings MERCIA E RANGE END FEED FITTINGS GENERAL RANGE Designed for end-feeding with soft solder or hard solder (brazing alloy) Available in sizes from 8-4mm, ideal for use in hot and cold water services, central heating, fuel services and general engineering applications WRAS approved. Manufactured to BS EN 4 Part MSR6 Stop end for use on tube mm mm 7 7 967 967 96 968 MEF Straight coupling x mm mm 3mm 4mm 9 9 9 93 94 9 96 97 MSR6 Tap connector x BSP union nut. Spigot and washer joint mm x /" mm x 3/4" x 3/4" 97 97 97 MEFIM Adaptor coupling imperial x metric. To connect imperial tube to metric tube /" x mm 3/4" x " x 988 989 98 MSR63 Bent tap connector x BSP union nut. Spigot and washer joint mm x /" 97 MEFR Reducing coupling x x x mm x mm 8 x mm 8 x 983 983 9833 9834 983
Size Pk Pk Code Size Pk Pk Code MEFS Slip/7S Straight coupling, slip pattern x mm 9836 9837 9838 MEF Backplate elbow. Copper x BSP parallel female thread. Backplate with three hole fixing mm x /" 987 MEF Straight female connector x BSP parallel female thread mm x /" x 3/4" x " 9839 98 984 MEF Obtuse elbow, 4 x mm 3mm 4mm 984 9843 9844 984 9846 9847 MEF3 Straight male connector x BSP taper male thread mm x /" x 3/4" x " 3mm x /4" x /" 4mm x " 9896 9897 9898 9899 99 99 MEFS Obtuse street elbow, 4 female x male for insertion in fitting mm 3mm 9848 9849 9 98 98 MEF6 Reducer larger end male for insertion into fitting x female x x x mm x mm 8 x mm 8 x 3 x mm 3 x 3 x 4 x mm 4 x 4 x 4 x 3mm 4 x mm 4 x 4 x 4 x 3mm 4 x 99 993 994 99 996 997 998 999 99 99 99 993 994 99 996 997 998 999 MEF Partial crossover female x male for insertion in fitting MEF3 Full crossover x mm mm 983 984 98 986 MEF Elbow x MEFS Street elbow female x male for insertion into fitting MEF3 Male elbow x BSP taper male thread mm mm 3mm 4mm mm mm 3mm 4mm mm x /" x 3/4" 3 98 99 98 98 98 983 984 98 986 987 988 989 98 98 98 983 984 MEF4 Equal tee, all ends for MEF Tee, reduced branch, all ends for mm mm 3mm 4mm x x mm x x mm 8 x 8 x mm 8 x 8 x 3 x 3 x mm 3 x 3 x 3 x 3 x 4 x 4 x mm 4 x 4 x 4 x 4 x 4 x 4 x 3mm 4 x 4 x mm 4 x 4 x 4 x 4 x 4 x 4 x 3mm 4 x 4 x 987 988 989 98 986 986 9863 9864 986 9866 9867 9868 9869 987 987 987 9873 9874 987 9876 9877 9878 9879 98 MEF4 Female elbow x BSP parallel female thread mm x /" x 3/4" 9 98 986 MEF6 Tee, one end reduced, all ends for x x 8 x x 8 x x 3 x x 3mm 3 x 8 x 3mm 988 988 9883 9884 988 3
Size Pk Pk Code Size Pk Pk Code MEF7 Tee, one end and branch reduced, all ends for x x mm 8 x x mm 8 x x 8 x x mm 8 x x 3 x 8 x mm 3 x 8 x 4 x 3 x 3mm 4 x 4 x 9886 9887 9888 9889 989 989 989 9893 9894 MEF8 Tee, both ends reduced, all ends for x x 989 Compression Fittings MERCIA COMPRESSION FITTINGS K BRASS COMPRESSION FITTINGS MEF6 Stop end for use with tube mm mm 3mm 4mm 7 99 99 99 993 994 99 996 997 Non-manipulative (type A) duplex brass compression fittings in sizes from 8-4mm Suitable for use on closed circuit central heating systems, in above ground hot and cold water services, on compressed air lines and other fluids and low pressure gas services WRAS approved. Manufactured to BS EN 4 Part MEF6AV Air release stop end. Female end for use on tube MEF6 Straight tap connector x BSP hexagonal union nut. Spigot and washer joint mm 998 mm x /" mm x 3/4" x 3/4" 999 99 993 MC Straight coupling x MCBP Burst repair coupling x mm mm 3mm 4mm x x x mm x mm x mm 8 x 99 9 9 96 98 9 9 9 9 93 94 9 97 99 x x mm 7 936 MEF63 Bent tap connector x BSP hexagonal union nut. Spigot and washer joint MEF64 Bent union adaptor x BSP union nut. Cone joint to BS. Supplied with bent tail mm x /" mm x 3/4 x 3/4" 993 9933 9934 x " 993 MC Male coupling x BSP parallel male thread 8 x /4 x /4 x 3/8 x / x / x 3/4 x /4 x 8 x 3/4 x 3/8 8 x x / 8 x./4 3 x x 3/4 3 x./4 4 x./ 4 x 9 7 938 939 9 94 94 943 944 94 946 947 948 949 9 9 9 93 94 9 MEF68 Straight union adaptor x BSP union nut. Cone joint to BS x " x /4" 9936 9937 MC3 Female coupling x BSP parallel female thread x /4" mm x /4 mm x 3/8" mm x /" mm x /4 mm x 3/8 mm x /" mm x 3/4 x / x 3/4" x " x " 3mm x./4 x./ 4mm x 9 7 93 94 9 96 97 98 99 9 93 93 933 934 93 936 937 4
Size Pk Pk Code Size Pk Pk Code MC Elbow x mm mm 3mm 4mm 8 96 96 963 964 96 966 967 968 MC3SF Straight swivel tap connector. x union nut. Spigot and fibre washer joint mm x / mm x 3/4 x 3/4 6 96 97 98 MC Male elbow x BSP parallel male thread mm x /" x 3/4" x " x " 3mm x./4 x./ 4mm x 7 8 969 97 97 97 973 974 97 MC3SF Bent swivel tap connector. x union nut. Spigot and fibre washer joint mm x /" x 3/4 99 9 MC3 Female elbow x BSP parallel female thread mm x /" mm x 3/4 x 3/4" x " x 3/4 x " 3mm x./4 x./ 4mm x 6 4 9 976 977 978 979 984 9 98 98 983 MC684 Tee CxF end mm x /" 7 9 MC3W Backplate elbow x BSP parallel female thread with backplate mm x /" x 3/4 934 93 MC67 Tee CxF branch mm x /" x / x 3/4 7 4 93 93 933 MCEQ Equal tee, all ends for mm mm 3mm 4mm 7 98 986 987 988 989 99 99 MC68 Reducing set for reducing the size of a Kuterlite socket. N.B. Only one reducing set can be used per end x x x mm x mm x mm 8 x mm 8 x 937 938 939 93 93 93 933 MC Tee both ends reduced x 99 MC3 Tank connector end with flange and backnut mm 3mm 4mm 7 9 9 9 93 94 9 MC Tee, one end reduced, all ends for x x 8 x x 8 x x 993 994 99 MC33 End Stop end. Body may be removed at any time and another Kuterlite fitting used with the same nut and compression ring mm 96 97 98 MC Tee, with reduced branch, all ends for x mm 8 x mm 8 x 996 997 998 MC63B Blanking discs mm 7 934 93 936 MC Tee, one end and branch reduced, all ends for x x mm 999
Size Pk Pk Code Size Pk Pk Code MC63C Copper cones mm mm 3/4 imperial 937 938 939 93 93 93 MC63B Brass cones mm mm 933 934 936 937 938 Push-fit Radiator Valves MERCIA PUSH-FIT RADIATOR VALVES Suitable for PE-X polybutylene, multi-layer pipes (to BS79: Part,, and 3) and pipe (to BS87: Part ) (NB: Plastic pipes to BS79 should be used) High quality polished chrome finish Security clip option to prevent accidental removal of pipe mm and mm straight and elbow adaptors available straight push-fit connections mm mm 663 664 Manual and Drain Off Radiator Valves MERCIA MANUAL AND DRAIN OFF RADIATOR VALVES Suitable for sealed systems ( bar rated) - tested in accordance with BS767- White handles as standard - LS cap included Comprehensive range: -mm includes drain off variant Chrome plated elbow push-fit connections mm mm 66 66 Jazz manual radiator valve mm 647 Drain off radiator valves with straight push-fit connections mm mm 667 668 Jazz drain off radiator valve mm 6473 Drain off radiator valves with elbow push-fit connections mm mm 66 666 Jazz angle radiator valves mm mm 6474 647 Manual straight radiator valve with push-fit connector mm 6478 Drain off angle radiator valves mm mm 6477 6478 6
Size Pk Pk Code Size Pk Pk Code Thermostatic radiator valve with self sealing tail mm mm 46 4 Servicing Valves, Filling Loop MERCIA SERVICING VALVES, FILLING LOOP Compact design Chrome plated Quality, durability and economy TRV and lockshield pack with self sealing tail TRV and lockshield pack with drain off mm mm mm mm 463 46 4 44 M7 straight service valve mm x mm 7 M7 straight service valve with tap connection mm x / 7 standard tail mm mm 4 4 4 standard tail mm 448 Double check valve - DZR mm x mm 7 Filling loop with tee mm x mm 7 self sealing tail mm 49 standard tail mm mm 43 44 4 Thermostatic MERCIA THERMOSTATIC and Manual AND Radiator MANUAL RADIATOR Valves VALVES Thermostatic radiator valve with standard tail mm mm 4 4 Accessories MERCIA ACCESSORIES Reducer x 47 Self sealing tail n/a 47 TRV and lockshield pack with standard tail mm mm 43 4 Locking and limiting pin n/a 47 St. Catherine s Avenue, Doncaster, South Yorkshire DN4 8DF 7
This certifies that PEGLER YORKSHIRE GROUP LTD has had the undermentioned product examined, tested and found, when correctly installed, to comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. MERCIA 'W' RANGE OF COPPER, DZR BRASS OR GUNMETAL CAPILLARY, LEAD FREE SOLDER RING AND THREADED FITTINGS FOR USE WITH COPPER PIPE The certificate by itself is not evidence of a valid WRAS Approval. Confirmation of the current status of an approval must be obtained from the WRAS Directory (www.wras.co.uk/directory) The product so mentioned will be valid until the end of: September 987 Certificate No. Secretary Chairman, Product Assessment Group October 4 8
This certifies that PEGLER YORKSHIRE GROUP LTD has had the undermentioned product examined, tested and found, when correctly installed, to comply with the requirements of the United Kingdom Water Supply (Water Fittings) Regulations and Scottish Water Byelaws. MERCIA "E" RANGE OF END FEED FITTINGS FOR USE WITH COPPER PIPE The certificate by itself is not evidence of a valid WRAS Approval. Confirmation of the current status of an approval must be obtained from the WRAS Directory (www.wras.co.uk/directory) The product so mentioned will be valid until the end of: December 6 6 Certificate No. Secretary Chairman, Product Assessment Group October 4 9