SCHEDULE 80 UPVC INDUSTRIAL VALVES VIADUX VERSION 1.0

SEDULE 80 UPV INDUSTRIAL VALVES VIADUX VERSION 1.0

TB SERIES TRUE UNION BALL VALVE TB SERIES TRUE UNION BALL VALVE FEATURES A new generation of thermoplastic floating ball valves. The TB Series features a low maintenance design with new patent pending System2 Sealing Technology. Assisting users in protecting property and life, a standard integral lock-out feature secures onto the body of the valve. Actuator ready design with ISO 5211 pattern on all sizes. Available in ¼" - 2" / DN8 - DN50 in PV and PV materials with either EPDM or FPM seals. KEY FEATURES AND BENEFITS System2 Sealing Technology provides longer cycle life 250 PSI / 16 Bar, non-shock at 70 F/23 full pressure rating onsistent operating torque with adjustmentfree design Lockout/Tagout mechanism that secures directly to valve body for enhanced safety 250 PSI /16 Bar Rating, Non-Shock at 70 F / 23 Lock-Out Plate Standard Ergonomic andle with UV Inhibitor ISO 5211 Top Flange True Union End onnections Ergonomic handle for improved grip and comfort ISO mounting flange simplifies actuation Permanent markings, eliminates labels Integral footpad for skid or panel mount Permanent Marking FPM or EPDM seals Double O-Ring stem seals Made in USA Reversible PTFE seats standard Easy replacement for existing ayward TB Series NSF/ANSI 61 and NSF/ANSI 372 Listed OPTIONS AND AESSORIES Uses Same Nut as ayward TB Series Ball Valve Integral Foot Pad Stem Extensions Manual Limit Switch or Spring Return andle EXPLODED VIEW 4 EXPLODED VIEW TB Series True Union Ball Valve PV per ASTM D1784 ell lass 12454 PV per ASTM D1784 ell lass 23447 FPP per ASTM D4101 ell lass 85580 (andle & Lock Plate) 1. Nut (2) 2. End onnector (2) 3. End onnector O-Ring (2) 4. andle 5. Lock Plate 6. Stem O-Rings (2) 7. Stem 8. Body 9. Seat arrier O-Ring (3) 10. losed End Seat arrier 11. Seats (2) 12. Ball 13. Open End Seat arrier 14. Seat Retainer 3 1 2 6 7 5 8 9 10 12 9 13 14 11 3 2 1 2 TB SERIES TRUE UNION BALL VALVE 3 TB SERIES TRUE UNION BALL VALVE

TB SERIES TRUE UNION BALL VALVE BENEFITS TB SERIES TRUE UNION BALL VALVE ONE VALVE PLATFORM LONEVITY New Patent Pending System2 Sealing Technology As with standard floating ball valves, a primary seal is formed between the ball and the downstream seat upon valve closure The new System2 Sealing Technology allows the upstream seat to float against the ball which causes a backup secondary seal between the upstream seat and the ball, and increases the sealing load on the downstream seat System2 Sealing Technology is fully bi-directional Pressure rating of 250 PSI / 16 Bar, non-shock at 70 F/23 Decreased maintenance due to System2 Sealing Technology, requires no adjustment of the seat in service System2 Sealing Technology leads to a facility with less downtime DEPENDABILITY AND OMFORT Ergonomic handle to improve grip Symmetric handle for operation from either side of valve, left or right handed UV inhibited material for extended life onsistent operating torque with adjustment free design Designed with no metal fasteners SAFETY Facilitates implementation of lockout/tagout Accommodates up to 4 different keyed locks for increased protection Padlock secures lock plate to body to avoid removal andle position and windows in lock plate indicate valve is open or closed VERSATILITY Direct mount to actuators with ISO 5211 mounting pads onsistent valve torque due to System2 Sealing Technology Actuator Ready valve priced lower than valve with handle and lock plate ISO 5211 couplings available in 9mm, 11mm and 14mm Integral panel mount facilitates one person installation ex flats engage standard and metric fasteners Same TB Series System2 technology with a Profile2 ball. TB Series with black handle identifier, drilled ball for sodium hypochlorite applications. Flow arrow indicates unidirectional seat design. TB SERIES R32.TB1050ASTE0000 1/2" 1/2" PV TB Series Ball Valve, SO/TD Ends, EPDM Seals R32.TB1050ASTV0000 1/2" 1/2" PV TB Series Ball Valve SO/TD Ends, FPM Seals R32.TB1075ASTE0000 3/4" 3/4" PV TB Series Ball Valve SO/TD Ends, EPDM Seals R32.TB1075ASTV0000 3/4" 3/4" PV TB Series Ball Valve, SO/TD Ends, FPM Seals R32.TB1100ASTE0000 1" 1" PV TB Series Ball Valve, SO/TD Ends, EPDM Seals R32.TB1100ASTV0000 1" 1" PV TB Series Ball Valve, SO/TD Ends, FPM Seals R32.TB1125ASTE0000 1 1/4" 1 1/4" PV TB Series Ball Valve, SO/TD Ends, EPDM Seals R32.TB1125ASTV0000 1 1/4" 1 1/4" PV TB Series Ball Valve, SO/TD Ends, FPM Seals R32.TB1150ASTE0000 1 1/2" 1 1/2" PV TB Series Ball Valve, SO/TD Ends, EPDM Seals R32.TB1150ASTV0000 1 1/2" 1 1/2" PV TB Series Ball Valve, SO/TD Ends, FPM Seals R32.TB1200ASTE0000 2" 2" PV TB Series Ball Valve, SO/TD Ends, EPDM Seals R32.TB1200ASTV0000 2" 2" PV TB Series Ball Valve, SO/TD Ends, FPM Seals V SERIES R32.V1050ASTE0A00 1/2" 1/2" PV V Series Ball Valve, Profile2 Ball, SO/TD, EPDM Seals R32.V1050ASTV0A00 1/2" 1/2" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, FPM Seals R32.V1075ASTE0A00 3/4" 3/4" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, EPDM Seals R32.V1075ASTV0A00 3/4" 3/4" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, FPM Seals R32.V1100ASTE0A00 1" 1" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, EPDM Seals R32.V1100ASTV0A00 1" 1" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, FPM Seals R32.V1200ASTE0A00 2" 2" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, EPDM Seals R32.V1200ASTV0A00 2" 2" PV V Series Ball Valve, Profile2 Ball, SO/TD Ends, FPM Seals R32.PXTB09P 9mm TB/V ISO oupling 9mm 1/4"-2" SSTL R32.PXTB11P 11mm TB/V ISO oupling 11mm 1/4"-2" SSTL R32.PXTB14P 14mm TB/V ISO oupling 14mm 1/4"-2" SSTL Z-BALL ODES R32.TB1050ASTV0Z00 1/2" 1/2" PV TB Series Ball Valve, SO/TD Ends, FPM Seals, Z BALL R32.TB1075ASTV0Z00 3/4" 3/4" PV TB Series Ball Valve, SO/TD Ends, FPM Seals, Z BALL R32.TB1100ASTV0Z00 1" 1" PV TB Series Ball Valve, SO/TD Ends, FPM Seals, Z BALL R32.TB1150ASTV0Z00 1 1/2" 1 1/2" PV TB Series Ball Valve, SO/TD Ends, FPM Seals, Z BALL R32.TB1200ASTV0Z00 2" 2" PV TB Series Ball Valve, SO/TD Ends, FPM Seals, Z BALL R32.TBEXTK075 1/4" - 3/4" DIY Stem Extension Kit for TB Series Ball Valves Sizes 1/4" - 3/4" R32.TBEXTK100 1" DIY Stem Extension Kit for TB Series Ball Valves Sizes 1" R32.TBEXTK200 1-1/4" - 2" DIY Stem Extension Kit for TB Series Ball Valves Sizes 1-1/4" - 2" R32.TBMKT1 1/2" - 1" TB/V Act Mounting 1/2" - 1" R32.TBMKT2 1-1/4" - 2" TB/V Act Mounting 1-1/4" - 2" R32.TBSRW - Seal Retainer Wrench ayward Flow ontrol provides a range of mounting options to adapt to our actuators or to your preferred actuator. With the TB Series ISO top integral flanges, all that is required is just the ISO 5211 coupling and bolting to adapt from the TB Series stem to ayward actuators or those actuators with ISO 5211 square drives. 4 TB SERIES TRUE UNION BALL VALVE 5 TB SERIES TRUE UNION BALL VALVE

TB SERIES TRUE UNION BALL VALVE TB SERIES TRUE UNION BALL VALVE SPEIFIATIONS 2D DRAWINS SAMPLE SPEIFIATION DIMENSIONS INES / MILLIMETERS Size A B D1 D2 E F J K L M N P Q inches / DN in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm 1/2 / 15 4.65 / 118 0.53 / 13 2.25 / 57 2.82 / 72 1.75 / 44 3.50 / 89 6.65 / 169 0.45 / 11 0.27 / 7 0.75 / 19 0.50 / 13 0.17 / 4 1.97 / 50 N/A 0.29 / 7 1.37 / 35 3/4 / 20 4.79 / 122 0.72 / 18 2.62 / 67 2.98 / 76 1.91 / 49 3.50 / 89 7.17 / 182 0.45 / 11 0.27 / 7 0.75 / 19 0.50 / 13 0.17 / 4 1.97 / 50 N/A 0.29 / 7 1.56 / 40 1 / 25 5.34 / 136 0.94 / 24 3.00 / 76 3.25 / 83 2.18 / 55 4.00 / 102 8.05 / 204 0.45 / 11 0.27 / 7 1.00 / 25 0.50 / 13 0.20 / 5 1.97 / 50 N/A 0.29 / 7 1.75 / 44 1-1/4 / 32 6.83 / 173 1.48 / 38 4.00 / 102 3.89 / 99 2.60 / 66 5.17 / 131 9.61 / 244 0.53 / 13 0.33 / 8 1.38 / 35 0.50 / 13 0.20 / 5 1.97 / 50 2.76 / 70 0.34 / 9 2.25 / 57 1-1/2 / 40 7.39 / 188 1.48 / 38 4.00 / 102 3.89 / 99 2.60 / 66 5.17 / 131 10.65 / 271 0.53 / 13 0.33 / 8 1.38 / 35 0.50 / 13 0.20 / 5 1.97 / 50 2.76 / 70 0.34 / 9 2.25 / 57 2 / 50 7.99 / 203 1.91 / 49 4.75 / 121 4.40 / 112 3.11 / 79 5.17 / 131 11.51 / 292 0.53 / 13 0.33 / 8 1.38 / 35 0.50 / 13 0.20 / 5 1.97 / 50 2.76 / 70 0.34 / 9 2.63 / 67 * 1-1/4" and 1-1/2" are 0.56" (14mm) longer than TB Series. All 1/2" - 2" thermoplastic ball valves shall be manufactured with PV Type 1, rade 1 (ASTM D1784, ell lassification 12454) or PV (ASTM D1784, ell lassification 23447). All sizes of shall be of true union design. Valve body shall contain an integral top mounting flange with dimensions and bolt circles conforming to ISO 5211. Valve to include as standard sliding lock-out plate that interlocks with integral flange on body for lock-out / tag-out. The valve has four locations for attaching a padlock. Body shall incorporate molded in foot pad for panel or rail mounting. All O-Rings shall be EPDM or FPM. Seats shall be PTFE as standard. Seats for 1/2" - 2" valves shall be reversible to allow field rebuild. Valves 2" and smaller shall have a floating ball and System2 seat carrier design that moves with the seat to affect a double seal to flow through a closed valve, and require no adjustment. The handle shall be retained without any metal fasteners and made from FPP with UV Inhibitor. Balls must be full-port design and fully sphere shape. Stem shall contain double O-Rings, and shall be blowout-proof design. Valve stem design shall be such that any torsional failure occurs outside of the two stem O-Rings. All 1/2" - 2" ball valves shall be pressure-rated for 250 PSI at 70 F non-shock. All sizes of ANSI 150 lb flanged ball valves shall be pressure-rated for 150 PSI at 70 F non-shock. Valves to be NSF/ ANSI 61 and NSF/ANSI 372 Listed. All ball valves shall carry a twoyear warranty, and shall be manufactured by ayward Flow ontrol and in the USA. TYPIAL APPLIATIONS Typical applications or installations include but are not limited to municipal waste and water treatment, clean water technology, chemical transfer and processing, aquatic and animal life support systems, mining and mineral processing, metal plating / surface finishing, marine, pulp and paper, landfills / environmental infrastructure and other demanding applications. WEIT LBS / K Size Weight with Socket/ Threaded Ends Weight with Flanged Ends Weight Bare Stem with Weight Bare Stem Socket/Threaded Ends with Flanged Ends inches / DN lbs / kg lbs / kg lbs / kg lbs / kg 1/2 / 15 0.70 / 0.32 1.12 / 0.51 0.59 / 0.27 1.01 / 0.46 3/4 / 20 0.90 / 0.41 1.50 / 0.68 0.79 / 0.36 1.39 / 0.63 1 / 25 1.18 / 0.54 1.98 / 0.90 1.05 / 0.48 1.85 / 0.84 1-1/4 / 32 2.57 / 1.17 3.51 / 1.59 2.32 / 1.05 3.26 / 1.48 1-1/2 / 40 2.62 / 1.19 3.82 / 1.73 2.37 / 1.08 3.57 / 1.62 2 / 50 3.87 / 1.76 6.37 / 2.89 3.62 / 1.64 6.12 / 2.78 V VALUES Size in / DN v VALUES 1/2 / 15 8.0 3/4 / 20 16.0 1 / 25 29.0 1-1/4 / 32 75.0 1-1/2 / 40 90.0 2 / 50 150.0 6 TB SERIES TRUE UNION BALL VALVE 7 TB SERIES TRUE UNION BALL VALVE

LA SERIES LATERAL TREE-WAY TRUE UNION BALL VALVES LA SERIES LATERAL TREE-WAY TRUE UNION BALL VALVES 1/2 TO 6 PV AND PV 1/2 TO 6 PV AND PV KEY FEATURES PV and PV PTFE Seats FPM or EPDM O-Rings AYWARD 1. 1. andle andle 2. Assembly Nut 2. Assembly Nut 3. End onnector 3. End onnector Ø A TYP Double O-Ring Stem Seal Simplifies Lateral onnections Replaces Valve/Tee onnection ombinations Quick, Easy to Install Replacement for Zero Dead-Leg Valves Ø A TYP Ø A TYP E E AYWARD AYWARD Ø A TYP Ø A TYP 1034 kpa @ 21 Non-Shock OPTIONS B B B B F F Lockouts Available Pneumatic and Electric Actuators 90º Ball E 160 140 2-1/2 4 PV ell lass 12454 per ASTM D1784 PV ell lass 23447 per ASTM D1784 FPM and EPDM O-Ring Seals LA SERIES R32.LA1050ST 1/2" 1/2" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket/threaded end connections R32.LA1050STE 1/2" 1/2" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket/threaded end connections R32.LA1075ST 3/4" 3/4" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket/threaded end connections R32.LA1075STE 3/4" 3/4" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket/threaded end connections R32.LA1100ST 1" 1" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket/threaded end connections R32.LA1100STE 1" 1" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket/threaded end connections R32.LA1150ST 1 1/2" 1-1/2" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket/threaded end connections R32.LA1150STE 1 1/2" 1-1/2" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket/threaded end connections R32.LA1200ST 2" 2" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket/threaded end connections R32.LA1200STE 2" 2" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket/threaded end connections R32.LA1300S 3" 3" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket end connections R32.LA1300SE 3" 3" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket end connections R32.LA1400S 4" 4" PV 3-Way Lateral True Union Ball Valves w/fpm O-Rings; socket end connections R32.LA1400SE 4" 4" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; socket end connections R32.LA1600FE 6" 6" PV 3-Way Lateral True Union Ball Valves w/epdm O-Rings; flanged end connections R32.LO2 2 1/2"-6" 2 1/2"-6" True Union Ball Valve andle Lock-Out, over Style DIMENSIONS Size A B E F inches / DN in / mm in / mm in / mm in / mm in / mm in / mm in / mm 1/2/15 2.25/57 2.30/58 3.29/84 3.50/89 3.87/98 6.72/170 1.70/43 3/4/20 2.63/67 2.56/65 3.57/91 3.50/89 4.60/117 7.50/191 2.93/74 1/25 3.00/76 2.98/76 4.14/105 4.00/102 4.77/121 8.50/216 3.23/82 1-1/2/40 4.75/121 4.30/109 5.87/149 4.00/102 6.00/152 11.85/301 4.19/106 2/50 4.75/121 4.38/111 6.00/152 5.00/127 6.75/171 12.25/311 4.19/106 3/80 6.40/163 5.90/150 7.59/193 10.50/267 8.72/221 16.00/406 5.35/136 4/100 8.56/217 7.00/178 9.33/237 10.50/267 10.44/265 18.88/480 6.85/174 6/150 8.56/217 N/A N/A 10.50/267 11.25/286 20.25/514 6.85/174 Dimensions are subject to change without notice consult factory for installation information WORKIN PRESSURE (PSI) 120 100 80 60 40 20 WORKIN PRESSURE (PSI) 160 140 120 V VALUES 100 80 0 60 80 100 120 140 160 180 200 220 240 260 60 1/2/15 3.0 TEMPERATURE F 40 20 Size in / DN v VALUES 3/4/20 7.0 1/25 10.0 1-1/2/40 30.0 0 60 80 100 120 140 160 180 200 220 240 260 2/50 58.0 3/80 190.0 4/100 450.0 6/150 340.0 TEMPERATURE F 8 TB SERIES TRUE UNION BALL VALVE 9 TB SERIES TRUE UNION BALL VALVE

WV SERIES FULL PATTERN WAFER EK VALVES WV SERIES FULL PATTERN WAFER EK VALVES 2 TO 8 PV AND VP 2 TO 8 PV AND VP KEY FEATURES Robust Full Pattern Body PV and PV No Special Spacers or Flanges Required EXPLODED VIEW igh v Rating Equal to Metal heck Valves, Saves on Energy and Pump Wear FPM or EPDM asket and Face Seal One-Piece Disc and Shaft Design Designed for ANSI150 and PN10 Flanges ontoured Inlet Port for Easy Flow Lower losing Pressure than Swing heck Valves Integral Bolt Eyes for Ease of Installation for Large Sizes an be Installed in Vertical or orizontal Position Pressure Rated to 150 PSI/PN10 in All Sizes 1034 kpa @ 21 Non-Shock OPTIONS 316 Stainless Steel or astelloy Disc Spring A * Patent No. 8,887,757 1. Face Seal O-Ring 2. Body 3. Wafer Disc O-Ring B D F 2-1/2 4 PV per ASTM D1784 ell lass 12454 PV per ASTM D1784 ell lass 23447 FPM and EPDM asket and Disc Seals 4. Wafer Disc 5. Wafer Disc Spring 6. Body O-Ring 7. Body 8. Face Seal O-Ring E J WV SERIES R32.WV1200ES 2" 2" PV Wafer Full Pattern heck Valve w/ss spring; EPDM O-Ring R32.WV1200V 2" 2" PV Wafer Full Pattern heck Valve w/ ASTELLOY spring; FPM O-Ring R32.WV1300ES 3" 3" PV Wafer Full Pattern heck Valve w/ss spring; EPDM R32.WV1300V 3" 3" PV Wafer Full Pattern heck Valve w/ ASTELLOY spring; FPM O-Ring R32.WV1400ES 4" 4" PV Wafer Full Pattern heck Valve w/ss spring; EPDM O-Ring R32.WV1400V 4" 4" PV Wafer Full Pattern heck Valve w/ ASTELLOY spring; FPM O-Ring R32.WV1600ES 4" 6" PV Wafer Full Pattern heck Valve w/ss spring; EPDM O-Ring R32.WV1600V 6" 6" PV Wafer Full Pattern heck Valve w/ ASTELLOY spring; FPM O-Ring R32.WV1800ES 8" 8" PV Wafer Full Pattern heck Valve w/ss spring; EPDM O-Ring DIMENSIONS Size A B D E F J inches / DN in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm 2/50 1.80/45.25/6 4.00/101 2.03/51 5.25/133 3/80 2.40/61.25/6 5.25/133 3.00/76 6.50/165 4/100 2.90/73.50/12.75/19 6.75/171 4.00/101 9.00/228.75/190 22.50/572 45.00/1143 6/150 3.00/76.50/12.88/22 8.63/219 5.77/146 11.13/282 9.50/241 22.50/572 45.00/1143 8/200 4.93/125.75/19.95/24 10.88/276 7.63/193 13.38/339 11.75/298 22.50/572 45.00/1143 Pressure Rating for ALL Sizes 150 PSI @ 70 F Non-Shock. onsult ayward for DN100 Wafer heck Dimension 10 TB SERIES TRUE UNION BALL VALVE 11 TB SERIES TRUE UNION BALL VALVE

T SERIES TRUE UNION BALL EK VALVES T SERIES TRUE UNION BALL EK VALVES 1/4 PV, 1/2 TO 2 PV, PV AND PP AND 3 TO 6 PV AND PV 1/4 PV, 1/2 TO 2 PV, PV AND PP AND 3 TO 6 PV AND PV KEY FEATURES PV, PV and PP For orizontal or Vertical Installation* 1/2 to 6 are Sure Block Design Square ut Seat for Positive Sealing Seats with Minimum Back Pressure 1/4 is Trim heck Design OPTIONS Foot Valve Screens EXPLODED VIEW V VALUES Size in / DN v VALUES 1/2/15 4.8 3/4/20 7.7 1/25 11.0 1-1/4/32 25.0 1-1/2/40 45.0 2/50 130.0 3/80 250.0 4/100 400.0 6/150 340.0 1/4"-4" PV and PV PV ell lass 12454 per ASTM D1784 PV ell lass 23447 per ASTM D1784 PP per ASTM D4101 FPM and EPDM O-Ring Seals * For installation information, see IOM manual 1. Body 2. O-Ring Seals 3. Square ut O-Ring Seat 4. Seal Retainer 5. End onnector 6. Union Nut SELETION ART Size Material End onnection 1/4 * (DN8 DN10) 1/2 F2 (DN15 DN50) 3" 4 (DN65 DN100) 6 *** (DN150) Seals PV Socket or Threaded FPM PV or PV PP** PV or PV Ball check valve with foot valve screen installed Socket and Threaded or Flanged**** Threaded Socket, Threaded or Flanged Flanged FPM or EPDM Pressure Rating 150 PSI @ 70 F Non-Shock 235 PSI @ 70 F Non-Shock 150 PSI @ 70 F Non-Shock T SERIES R32.T10050STE 1/2" 1/2" PV True Union Ball heck Valves w/epdm O-Rings; socket/threaded end connections R32.T10075STE 3/4" 3/4" PV True Union Ball heck Valves w/epdm O-Rings; socket/threaded end connections R32.T10100STE 1" 1" PV True Union Ball heck Valves w/epdm O-Rings; socket/threaded end connections R32.T10125STE 1-1/4" 1-1/4" PV True Union Ball heck Valves w/epdm O-Rings; socket/threaded end connections R32.T10150STE 1-1/2" 1-1/2" PV True Union Ball heck Valves w/epdm O-Rings; socket/threaded end connections R32.T10200STE 2" 2" PV True Union Ball heck Valves w/epdm O-Rings; socket/threaded end connections R32.T1300SE 3" 3" PV True Union Ball heck Valves w/epdm O-Rings; socket end connections R32.T1400SE 4" 4" PV True Union Ball heck Valves w/epdm O-Rings; socket end connections R32.T1600FE 6" 6" PV True Union Ball heck Valves w/epdm O-Rings; flanged end connections WORKIN PRESSURE (PSI) 160 140 120 100 DIMENSIONS Size A B D E SO/TD FLANED inches / DN in / mm in / mm in / mm in / mm in / mm Weight lbs/kg 1/2/15 4.63/118.50/13 2.25/57.75/19 6.75/171.75/.34 1.00/.45 3/4/20* 4.75/121.75/19 2.63/67 1.00/25 7.13/181.75/.34 1.38/.63 1/25* 5.25/133 1.00/25 3.00/76 1.25/32 7.75/197 1.25/.57 2.13/.97 1-1/4/32* 6.30/160 1.25/32 4.00/102 1.75/44 9.19/233 2.00/.91 3.75/1.70 1-1/2/40* 6.75/171 1.50/38 4.00/102 1.75/44 9.75/248 2.00/.91 3.75/1.70 80 2/50* 8.00/203 1.94/49 4.75/121 2.25/57 11.25/286 3.75/1.70 5.75/2.61 60 3/80 10.56/268 2.88/73 6.56/167 3.25/83 14.38/365 10.00/4.54 14.00/6.35 4/100 12.94/329 4.00/102 8.56/217 4.25/108 17.00/432 17.00/7.71 25.00/11.34 40 6/150 N/A 4.00/102 N/A 4.25/108 19.19/487 N/A 30.20/13.70 20 0 Dimensions 60 80 are 100 subject 120to change 140 without 160 180 notice 200 consult 220 factory 240 for 260 installation information ayward T Ball heck Valves TEMPERATURE require a minimum F of 2 PSI to seat and 1-1/2 PSI cracking pressure to open * Metric End onnections Available In: BSP Straight Thread, BSP TR Tapered Thread and Metric Socket for PV and PV Valves Only * Trim hecks ** 2 PP is rated to 100 PSI @ 70 F Non-Shock *** 4 valve venturied to 6 **** All flanged valves are rated to 150 PSI @ 70 F Non-Shock 12 TB SERIES TRUE UNION BALL VALVE 13 TB SERIES TRUE UNION BALL VALVE

BYV SERIES BUTTERFLY VALVES BYV SERIES BUTTERFLY VALVES 2 TO 12 PV, PV AND FPP 2 TO 12 PV, PV AND FPP KEY FEATURES EXPLODED VIEW 2"-12" PV/EPDM One Piece Injection Molded PV, PV or FPP Body PV, PV or FPP Disc Materials Viton, EPDM and Nitrile Seat Materials and Lever with 19 Lockable Stop Positions & 360 Interlocking Splines External Disc Position and Flow Indication ydro-dynamic entric Disc for Increased Flow Performance Over-Sized Liner Face Maximizes Surface ontact with Flanges 1-Piece 316 Stainless Steel Stem with Threaded Retaining land Stem Bearing and Seal Retainer for Absolute Stem Position and Seal ISO 5211 Top Flange and Stem Drive All Sizes Meet ANSI B16.10/ISO 5752 Narrow Face-to-Face Dimensions Pressure Rated at 150 PSI/10 Bar in All Sizes @ 70 F Non-Shock 1034 kpa @ 21 Non-Shock OPTIONS Over-Molded or Field Mountable 316 Stainless Steel Lugs ear Operators omplete Range of Pneumatic or Electric Actuators Stem Extensions 2 Square Operating Nut hain Operator for ear Box Lock Out ap 1. Body 2. Disc 3. Liner 4. Stem 5. Upper Stem Bearings 6. Seal Retainer 7. O-Rings (4) 8. Threaded Retaining land 9. Weather Seal 10. Splined Throttle Plate (Ultem ) 11. and Lever Assembly 12. Bezel, Washers, Socket ead ap Screw V VALUES Size in / DN DIS ANLE 15 30 45 60 75 Full Open Position 2/50 0.2 15 37 65 88 92 3/80 3.1 28 36 83 182 250 4/100 20 58 84 183 390 470 6/150 30 105 200 458 1000 1510 8/200 125 203 375 770 1650 2820 10/250 123 289 644 1396 3003 4723 12/300 154 435 1011 2189 4586 6400 PV ell lass 12454 per ASTM D1784 PV ell lass 23447 per ASTM D1784 FPP ell lass 85580 per ASTM D4101 Viton, EPDM or Nitrile Liners 14 TB SERIES TRUE UNION BALL VALVE 15 TB SERIES TRUE UNION BALL VALVE

BYV SERIES BUTTERFLY VALVES BYV SERIES BUTTERFLY VALVES 2 TO 12 PV, PV AND FPP ew DIMENSIONS Size A B (1) D, ANSI (2) E F, ANSI (2) inches / DN in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm 2/50 6.12/155 2.03/52 1.69/43 0.75/19 4/4 4.75/121 7.53/191 6.25/159 4.75/121 10.5/267 3/80 7.75/197 3.25/83 1.81/46 0.75/19 4/8 6.00/152 8.31/211 7.00/178 4.75/121 10.5/267 4/100 9.13/232 4.12/105 2.06/52 0.75/19 8/8 7.50/191 9.29/236 8.00/203 7.28/185 12.00/305 6/150 11.25/286 5.98/152 2.19/56 0.88/22 8/8 9.50/241 12.35/314 10.00/254 7.75/197 14.00/356 8/200 13.75/349 7.75/197 2.38/60 0.88/22 8/8 11.75/298 13.48/342 11.18/284 7.75/197 16.00/406 10/250 16.13/410 9.63/245 2.69/68 1.00/25 12/12 14.25/362 16.37/416 N/A 9.00/229 N/A 12/300 19.13/486 11.37/289 3.06/78 1.00/25 12/12 17.00/432 17.87/454 N/A 9.00/229 N/A Size J K (4) ISO 5211 L M N P Q, 10 & 12, Square Key R Weight W Lever Weight W ear inches / DN in / mm in / mm in / mm in / mm in / mm in / mm in / mm lbs/kg lbs/kg 2/50 5/125 F07-D11 3.17/81 3.97/101 0.51/13 0.430-0.433/10.92-11 - 2.76/70 4.0/1.8 5.8/2.6 3/80 5/125 F07-D11 3.88/99 4.75/121 0.51/13 0.430-0.433/10.92-11 - 2.76/70 5.2/2.4 7.0/3.2 4/100 5/125 F07-D14 4.57/116 5.69/145 0.68/17 0.548-0.551/13.92-14 - 2.76/70 7.7/3.5 11.1/5 6/150 8/200 F10-D14 5.63/143 7.25/184 0.68/17 0.548-0.551/13.92-14 - 4.02/102 12.7/5.8 16.2/7.4 8/200 8/200 F10-D17 6.88/175 8.38/213 0.77/20 0.666-0.669/16.92-17 - 4.02/102 18.5/8.4 21.9/10.0 10/250 10/250 F12-V28 8.06/205 10.88/276 2.24/57 1.102 DIA./28 DIA. 0.25/6.35 4.92/125 N/A 34.2/15.5 12/300 10/250 F12-V36 9.56/243 12.38/314 2.24/57 1.417 DIA./36 DIA. 0.25/6.35 4.92/125 N/A 50.4/22.9 1) Dimension per ASME B16.10 lass 150, Steel, Narrow. 2) ANSI dimension per ASME B16.5, lass 150. 3) Dimension per DIN 2501, PN10 4) ISO 5211 Flange and Drive. 5) All weights are for non-lugged versions BYV SERIES R32.BYV11020A0EL000 2" 2" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; lever operator R32.BYV11020A0ELI00 2" 2" Butterfly Valve w/pv Body - Lugged; PV Disc; EPDM liner & seals; lever operator R32.BYV11020A0VL000 2" 2" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11020A0VLI00 2" 2" Butterfly Valve w/pv Body-Lugged; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11030A0EL000 3" 3" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; lever operator R32.BYV11030A0ELI00 3" 3" Butterfly Valve w/pv Body-Lugged; PV Disc; EPDM liner & seals; lever operator R32.BYV11030A0VL000 3" 3" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11030A0VLI00 3" 3" Butterfly Valve w/pv Body-Lugged; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11040A0EL000 4" 4" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; lever operator R32.BYV11040A0ELI00 4" 4" Butterfly Valve w/pv Body-Lugged; PV Disc; EPDM liner & seals; lever operator R32.BYV11040A0VL000 4" 4" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11040A0VLI00 4" 4" Butterfly Valve w/pv Body-Lugged; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11060A0E000 6" 6" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; gear operator R32.BYV11060A0EL000 6" 6" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; lever operator R32.BYV11060A0ELI00 6" 6" Butterfly Valve w/pv Body-Lugged; PV Disc; EPDM liner & seals; lever operator R32.BYV11060A0V000 6" 6" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; gear operator R32.BYV11060A0VL000 6" 6" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11060A0VLI00 6" 6" Butterfly Valve w/pv Body-Lugged; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11080A0E000 8" 8" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; gear operator R32.BYV11080A0EL000 8" 8" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; lever operator R32.BYV11080A0ELI00 8" 8" Butterfly Valve w/pv Body-Lugged; PV Disc; EPDM liner & seals; lever operator R32.BYV11080A0V000 8" 8" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; gear operator R32.BYV11080A0VL000 8" 8" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11080A0VLI00 8" 8" Butterfly Valve w/pv Body-Lugged; PV Disc; Viton liner / FPM seals; lever operator R32.BYV11100A0E000 10" 10" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; gear operator R32.BYV11100A0V000 10" 10" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; gear operator R32.BYV11120A0E000 12" 12" Butterfly Valve w/pv Body; PV Disc; EPDM liner & seals; gear operator R32.BYV11120A0V000 12" 12" Butterfly Valve w/pv Body; PV Disc; Viton liner / FPM seals; gear operator BYV SERIES APS ODE DESRIPTION R32.BYVAPK030 FPP ap for BYV Series Butterfly Valve for Sizes 2" - 3" / DN50-80 R32.BYVAPK030L FPP Lock Out ap for BYV Series Butterfly Valve with 316SS Lock Tab for Sizes 2" - 3" / DN50-80 R32.BYVAPK040 FPP ap for BYV Series Butterfly Valve for Sizes 4" / DN100 R32.BYVAPK040L FPP Lock Out ap for BYV Series Butterfly Valve with 316SS Lock Tab for Sizes 4" / DN100 R32.BYVAPK060 FPP ap for BYV Series Butterfly Valve for Sizes 6" / DN150 R32.BYVAPK060L FPP Lock Out ap for BYV Series Butterfly Valve with 316SS Lock Tab for Sizes 6" / DN150 R32.BYVAPK080 FPP ap for BYV Series Butterfly Valve for Sizes 8" / DN200 R32.BYVAPK080L FPP Lock Out ap for BYV Series Butterfly Valve with 316SS Lock Tab for Sizes 8" / DN200 astelloy is a registered trademark of aynes International Inc. 16 TB SERIES TRUE UNION BALL VALVE 17 TB SERIES TRUE UNION BALL VALVE

YS SERIES Y-STRAINERS YS SERIES Y-STRAINERS 1/2, 3/4, 1, 1-1/2 AND 2 PV, PV AND LEAR PV, 1-1/4 PV AND LEAR PV AND 3-4 PV AND PV KEY FEATURES 1/2, 3/4, 1, 1-1/2 AND 2 PV, PV AND LEAR PV, 1-1/4 PV AND LEAR PV AND 3-4 PV AND PV PV, PV and lear PV orizontal or Vertical Installation FPM O-Ring Seals 1. ap 2. O-Ring Seal 3. Screen L 2:1 Open Area Ratio ex ap for Easy Access to Screen 4. Body K Standard Screen has 1/32 Perforation 1034 kpa @ 21 Non-Shock OPTIONS Stainless Steel Perforated or Mesh Strainer Screens Available in Various Sizes True Union onnection PV ell lass 12454 per ASTM D1784 lear PV ell lass 12454 per ASTM D1784 PV ell lass 23447 per ASTM D1784 FPM and EPDM O-Ring Seals DIMENSIONS Size A B D E F J K L SO/TD FLANED inches / DN in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm in / mm Weight lbs/kg 1/2/15 3.38/86 1.38/35 2.25/57 1.50/38 N/A.56/14 1.00/25 2.13/54 2.50/64 2.25/57 6.64/167.25/.11 N/A 3/4/20 4.18/106 1.69/43 2.88/73 2.00/51 N/A.81/21 1.25/ 32 2.75/70 3.00/76 2.63/67 7.42/188.63/.29 N/A 1/25 5.19/132 2.00/51 3.63/92 2.16/55 N/A 1.00/25 1.50/38 3.30/84 3.32/84 3.00/76 8.97/228.88/.40 N/A 1-1/4/32 6.63/168 2.63/67 4.50/114 2.94/75 N/A 1.25/32 2.00/51 4.50/114 4.45/113 4.75/121 13.01/330 1.75/.79 N/A 1-1/2/40 6.63/168 2.63/67 4.50/114 2.94/75 N/A 1.56/40 2.00/51 4.50/114 4.45/113 4.75/121 12.07/307 1.63/.74 N/A 2/50 7.63/194 3.38/86 5.38/137 3.75/95 11.00/279 2.00/51 2.38/60 5.06/129 4.88/124 4.75/121 13.05/331 3.00/1.36 5.00/2.27 3/80 10.31/262 4.69/119 7.25/184 5.50/140 14.37/365 2.90/74 3.50/89 6.60/168 6.54/166 6.40/163 16.77/426 7.50/3.40 12.25/5.56 4/100 12.81/325 5.75/146 8.88/226 6.18 /157 17.73/450 3.78/96 4.25/108 8.00/203 8.58/218 8.56/217 21.23/539 9.50/4.30 17.50/7.94 Dimensions are subject to change without notice consult factory for installation information BASKET OPTIONS Perforation Sizes Mesh Sizes Basket Material V VALUES Size in / DN v VALUES YS SERIES R32.YS10050SU 1/2" 1/2" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections R32.YS10075SU 3/4" 3/4" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections R32.YS10100SU 1" 1" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections 1/32 20 1/16 40 1/8 60 5/32 80 3/16 100 SSTL, astelloy, Monel and Titanium 1/2/15 4.0 3/4/20 6.8 1/25 9.0 1-1/4/32 12 1-1/2/40 28 R32.YS10125SU 1-1/4" 1-1/4" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections R32.YS10150SU 1-1/2" 1-1/2" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections R32.YS10200SU 2" 2" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections R32.YS10300SU 3" 3" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections R32.YS10400SU 4" 4" PV TU Y-Strainers w/fpm O-Ring; 1/32" perf screen; socket end connections 1/4 200 3/8 325 1/32 1/16 N/A 1/8 PV, PV and PP 2/50 28 3/80 65 4/100 100 * With 1/32 plastic screen 3/16 18 TB SERIES TRUE UNION BALL VALVE 19 TB SERIES TRUE UNION BALL VALVE

SEDULE 80 UPV INDUSTRIAL VALVES USTOMER ENTRES PROJET OFFIE E: projects@viadux.com.au E: sales@viadux.com.au ADELAIDE P: 08 8440 5980 E: cca.sales@viadux.com.au SYDNEY P: 02 9794 3440 E: ccs.sales@viadux.com.au DARWIN P: 08 8931 5100 E: ccd.sales@viadux.com.au OLD OAST P: 07 5501 1400 E: ccg.sales@viadux.com.au MELBOURNE P: 03 9309 9133 E: ccm.sales@viadux.com.au NEWASTLE P: 02 4914 0700 E: ccn.sales@viadux.com.au PERT P: 08 9334 8100 E: ccp.sales@viadux.com.au TOWNSVILLE P: 07 4725 5940 E: cct.sales@viadux.com.au VIADUX WATER NETWORK SOLUTIONS PO BOX 1025 PARRAMATTA, NEW SOUT WALES 2150 / VIADUX.OM.AU PONE 1300 VIADUX (842 389) All Viadux trademarks and logos are owned by Viadux Pty. Ltd. All other brand or product names are trademarks or registered marks of their respective owners. Because we are continuously improving our products and services, Viadux reserves the right to change specifications without prior notice. ayward is a registered trademark of ayward Industries, Inc. c 2018 ayward Industries, Inc.