Butterfly Valve - Series 200

Similar documents
V- NOTCH BALL VALVE SERIES - 310

Introduction. Globe and Angle Body Control Valves. In Line Valve provides Solutions to Flow Control

Series 110 Globe Control Valves

GLOBE 3 WAY CONTROL VALVE SERIES INTRODUCTION

GLOBE 2 WAY CONTROL VALVE SERIES - 110

DIAPHRAGM CONTROL VALVE

SPIRA-TROL. ½" to 4" ASME (ANSI) Two-port KEA, KFA and KLA Control Valves

Maxifluss Rotary Plug Valves VETEC Types 72.3/R and 72.4/R

MK Series High Performance Butterfly Submittal/Technical Data

Series PV30. Split-Body Pinch Valve. CLA-VAL Copyright Cla-Val 2007 Printed in USA Specifications subject to change without notice.

DESUPERHEATER (SERIES 800)

High Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300

L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST

INSTRUMENTS & SYSTEMS

BC SERIES CHECK VALVE

Two port valves. pneumatically actuated

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

WAFER STYLE KNIFE GATE VALVE

HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10

Stainless steel butterfly valves Index

Pneumatic Butterfly Valve Type 3335 / AT

> CR-TEC Butterfly Valves

RUBBER SLEEVE KNIFE GATE VALVE

PNEUMATIC ON OFF GLOBE VALVE

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The

Butterfly Valves. Quality Valves at Low Cost

RUBBER SLEEVE KNIFE GATE VALVE

RS Series. Three way rotary valves for temperature control systems

Knife gate valves Index

HOPPER SHAPE KNIFE GATE VALVE

Eccentric Rotary Control Valve (For size 1 to 4 inches)

butterfly valves high performance Ruamcharoen Engineering And Supplies Ltp., Tel : Fax :

WAFER STYLE KNIFE GATE VALVE

The series 10 butterfly valves has been developed for a large number of applications throughout process industries. The

IFC Series DR Retainerless Dual Disc Check Valves

Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²

Sealing Test Pressure (MPa)

RUBBER SLEEVE KNIFE GATE VALVE

GVI Series Industrial Globe Valves for Flow Control

THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice

ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN

SQUARE PORT KNIFE GATE VALVE

Diaphragm Valves. Product information

Pneumatic Butterfly Valve Pfeiffer Type BR 14b/AT

Pneumatic Shut-off Butterfly Valve Type 3335/BR 31a

Model 912. Model 913: Full nozzle design. Bronze/brass body and bonnet. 316 SS trim (base, disc and disc holder).

Series 2200 and 2220 Control Valves

RESILIENT SEATED BUTTERFLY VALVES. Howell Valve & Automation. Toll Free: Howellvalve.com

Butterfy valves 4 offset DN65 up to DN2500 / PN2,5 up to PN160 / Class 150 up to Class 900

Mark 95 Series. Sanitary Valves Mark 95 Sanitary Back Pressure Regulators. Sanitary Back Pressure Regulators. Features

Forbes Marshall Control Valve. Operational Economy with Optimum Control

Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI

Control valves with pneumatic actuators up to 350 C PN

GTW 3-WAY CONTROL VALVE SIZES 1/2" 12" ANSI CLASS 125/250, 150/300

WAFER STYLE KNIFE GATE VALVE

DFR Valve Actuator. Features. Model

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

EMET CONTROLS PVT.LTD

DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice

KNIFE GATE VALVES -- MODEL D

Butterfly Valves. Applications. Pressures To 200 PSIG Temperatures to 300 F BUTTERFLY VALVES FEATURES MATERIALS OF CONSTRUCTION SEAT MATERIALS

High End Technology. Tight Shutoff. Reliability. Expertise you can trust. General Products

FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION

RESILIENT SEATED BUTTERFLY VALVES

BULLETIN SEPTEMBER 2009 BOS OFFSET DISC RESILIENT- SEATED BUTTERFLY VALVES TECHNICAL SPECIFICATIONS

Eccentric Rotary Control Valve (For size 6 to 12 inches)

Dimensions and Weights

Maxifluss Rotary Plug Valve. VETEC Type 72.1/R, Type 72.3/R and Type 72.4/R

KNIFE GATE VALVES -- MODEL A

HEAVY DUTY KNIFE GATE VALVE

COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:

TN2000 Series Pneumatic Piston Actuators for 6" and 8" SPIRA-TROL Series Control Valves

VGSP1014. Valve Group. Solent & Pratt. Butterfly Valves

HIGH PERFORMANCE BUTTERFLY VALVE MODEL HP300 SERIES

HIGH PERFORMANCE SEGMENTED V-BALL CONTROL VALVE

Titan Flow Control, Inc. Your pipeline to the future!

FEATURES. 3 position models can be equipped with special 180 operators offering two 90 steps.

CONTROL VALVES QUALITY, DEPENDABILITY, SERVICE. REPUTATION BUILT ON. Innovative Solutions

Mark 53/54 Series. Pressure Regulators Mark 53 Differential Back Pressure Regulators. Differential Back Pressure Regulators.

Model DFR Valve Actuator

ADCATROL PNEUMATIC CONTROL VALVES PV16 ON-OFF (V16 globe valves series with linear actuators PA series)

DM9900 Series Segmented V-Ball Control Valve

Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve

Series 8000 Butterfly Valves

Series 8000 Air Actuated Valves for liquid service

BIDIRECTIONAL WAFER Knife Gate Valve

UNIWORLD series PNEUMATIC VALVES

ANGLE SEAT AIR ACTUATED VALVES 2 Way (2/2)

BUTTERFLY VALVE ST BUTTERFLY VALVE VALVES - 31

QBV SERIES Butterfly Valves

BI-DIRECTIONAL KNIFE GATE VALVE

Spring Return and Double Acting Pneumatic Quarter- Turn Actuators For Output Torques to 13,444 lb.in.

B Series 1/2" to 2" 2-Way and 3-Way Bronze Control Valves

VG4000 Series. High-Capacity/High-Closeoff Electric Zone Valves

BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR

BR 10a Control and Shut-off Butterfly valve

S, M, L, and 31 Series. Straight-pattern flow coefficients (C v ) from to Low- and high-pressure service

UNIDIRECTIONAL Knife Gate Valve

MINIMATIC COMPACT - COMPETITIVE - FLOW CONTROL NORTHVALE KORTING LTD

FEATURES. ANSI Class 150 or 300. Complete line of accessories. MATERIALS OF CONSTRUCTION

Transcription:

utterfly Valve - Series 200 utterfly Valve design is the most common type of rotary valve and provides low weight to v Ratio combined with simplicity of design and comparatively low cost. It is a simple device to control or block the flow, a single vane or wafer disc pivots in the valve body. They can be found on a wide variety of applications for throttling or two position control in the chemical, paper and pulp, sugar industries, cooling water circulation, water treatment plants, compressed air, gas plant, flue gas desulphurisation plants etc. utterfly Valves have been around the industry for decades, performing well defined tasks and are Economic alternative to Gate valves, all valves, Plug valves etc Specification Design Wafer Size 50 to 900 mm (2 to 36 ) Rating 50 to 900 mm (2 to 36 ) Flow haracteristic ody Material Vane Material ody Sleeve Soft Seat Gland Packing Throttling, On-Off ast Iron, arbon Steel, Stainless Steel etc. Stainless Steel. Neoprene, Nitrile, Teflon, EPDM, Silicon, utyl, Viton etc. Teflon PTFE V Rings up to 180 Grafoil up to 400 ctuator Form ctuator Type Diaphragm Spring Range ir supply ir onnection Diaphragm, Piston, Electric Rotary Nitrile / Neoprene 3 15 Psig (0.2 1.0 Kg/cm²) 6 30 Psig (0.4 2.0 Kg/cm²) 20 35 Psig (1.4 2.5 Kg/cm²) 1/ 4 or 1/ 2 NPT ccessories Valve Positioners - Pneumatic, Electro-Pneumatic, Smart Instruments - irset, Solenoid Valve, Volume ooster, irlock, Limit Switches Features - Top or Side Mounted handwheel, Limit Stops Removable lind ead, Steam Jacketing etc utterfly Valve Sleeved Design, Model 250 utterfly Valve Metal to Metal, Model 210 / 240 utterfly Valve Soft Seated, Model 230 Quality and Performance Guarantee Design Features l Produced with Quality Systems accredited to ISO 9001 : 2008. l Full material certification available for all major component Parts. l Full guarantee on design and Performance. l ll testing are performed to the requirements of NSI 16.34. l ssured product quality. l ompact and simple design, low cost and maintenance free. l Very high v to body size ratio. l Reliable smooth operation and flow control. l Replaceable elastomer liner. l ubble tight shut off, leakage lass VI. l Rangeability of 33:1 in the control range. l Flow characteristic throttling for modulating duty. 47 l Valve Solutions tel: 01274 531992 fax: 01274 531995 email: enquiry@valvesolutions.co.uk web: www.valvesolutions.co.uk

Valve Sizing o-efficient v Rating Valve size mm 50 65 80 100 125 150 200 250 300 350 400 450 500 600 750 900 v at full bore 60 o 68 125 170 275 425 650 1225 1900 2750 3250 4500 6000 7000 11000 16000 24000 90 o 136 250 340 550 850 1300 2450 3800 5500 6500 9000 12000 14000 22000 32000 48000 Temperature Ratings for Sleeved utterfly Valves Elastometer Low limit Temperature limits o igh limit Service Natural Rubber -28 70 ir, Water Neoprene -17 80 ir, Water, Freon 12, 114 Nitrile ( una N, ycar) -12 80 Freon 11, 12, 13, ir, Water, lcohols, romatic hydrocarbon ypalon -9 105 cids, lkalis EDPM -35 120 cids, lkalis, Steam utyl -23 1 50 cids, lkalis, Steam, lcohols Viton -6 200 romatic, Degresed, igh Temp, ir and Gas Silicon -60 225 igh Temperature ir Temperature Ratings for Unlined utterfly Valves ody materials ast Iron ( 126 lass ) Steel (arbon Steel, W - 28, L -45) Stainless Steel (F8, F8M) Useful temperature rating -25 to 200-25 to 400-250 to 830 Offset Vane 30 o 10 o Flow direction PTFE seat 45 o 60 o ody 90 o Vane Flow direction PTFE seat Offset design indicating positions of valve opening ody Sealing design in both flow directions Service backed by Experience l 48

Sizing and actuator selection for utterfly Valves Valve size Metal to metal v in USGPM Torque Required at a o Ta o = x Pα o + Maximum allowable torque for 304/316 shaft Shaft dia inch mm 60 90 0 60 90 IN-L inch mm 2 50 65 130 0.2 1 2.75 36 225 1/2 14 2.1/2 65 120 240 0.3 1.86 5.26 36 225 1/2 14 3 80 160 320 0.44 4.14 9.04 36 225 1/2 14 4 100 280 560 1 7.4 21.4 50 430 5/8 16 5 125 430 860 1.56 14.06 41.36 50 430 5/8 16 6 150 640 1280 2.63 24.13 71.63 65 745 3/4 20 8 200 1200 2400 6.23 57.23 169.23 100 1764 1 25 10 250 1850 3700 9.81 109.81 329.81 100 1764 1 25 12 300 2700 5400 14.4 187.4 552.4 100 1764 1 25 14 350 3300 6600 27 272 790 184 3438 1.1/4 33 16 400 4400 8800 35.3 405.3 1195.3 184 3438 1.3/8 35 18 450 6250 12500 52.7 587.7 1762.7 232 5508 1.5/8 42 20 500 6900 13800 64.4 784.4 2374.4 235 5508 1.5/8 42 24 600 10000 20000 108 1368 4138 282 14130 2 50 30 750 16300 32600 212 2732 8262 396 26640 2.1/2 63 36 900 24200 48400 300 4580 14000 396 26640 2.1/2 63 Valve size Soft seated v in USGPM Torque required at a o Ta o = x Pα o + Maximum allowable torque for 304/316 shaft Shaft dia inch mm 60 90 0 o 60 o 90 o 0 o 10 o -90 o IN-L inch mm 2 50 65 130 0.2 1 2.75 75 36 225 1/2 14 2.1/2 65 120 240 0.3 1.86 5.26 75 36 225 1/2 14 3 80 160 320 0.44 4.14 9.04 75 36 225 1/2 14 4 100 280 560 1 7.4 21.4 100 50 430 5/8 16 5 125 430 860 1.88 14.38 41.68 120 65 745 3/4 20 6 150 640 1280 3.5 25 72.5 180 100 1764 1 25 8 200 1200 2400 6.23 57.23 169.23 250 140 1764 1.3/32 28 10 250 1850 3700 9.81 109.81 329.81 320 184 3440 1.3/8 35 12 300 2700 5400 14.4 187.4 552.4 320 184 5500 1.1/2 40 14 350 3300 6600 27 272 790 480 282 9500 1.3/4 45 16 400 4400 8800 35.3 405.3 1195.3 480 282 14130 2 50 18 450 6250 12500 52.7 587.7 1762.7 700 396 19700 2.1/4 55 20 500 6900 13800 91.9 811.9 2401.9 700 396 19700 2.1/4 55 24 600 10000 20000 135 1392 4138 700 396 26700 2.1/4 63 30 750 16300 32600 212 2732 8262 1000 396 26700 2.1/2 63 36 900 24200 48400 360 4640 14060 1000 520 53900 3 80 49 l Valve Solutions tel: 01274 531992 fax: 01274 531995 email: enquiry@valvesolutions.co.uk web: www.valvesolutions.co.uk

vailable Torque for 90o ctuator (Lbc-in) ctuator ctuator Mode Spring Range (Kg/cm²) / Torque 55 PDS 055-90 o 0.2 to 1.0 33 183 95 PDS 095-90 o 0.2 to 1.0 33 316 140 PDS 140-90 o 0.2 to 1.0 49 691 140 PDS 140G-90 o 0.2 to 1.0 68.5 966 300 PDS 140-90 o 0.2 to 1.0 77.5 2343 vailable Torque for 60o ctuator (Lbc-in) ctuator ctuator Mode Spring Range (Kg/cm²) / Torque 55 PDS 055-60 o 0.2 to 1.0 45.5 252 95 PDS 095-60 o 0.2 to 1.0 45.5 436 140 PDS 140-60 o 0.2 to 1.0 68.5 966 140 PDS 140G-60 o 0.2 to 1.0 96.5 1361 300 PDS 140-60 o 0.2 to 1.0 105.5 3189 Note:- For spring range other than 0.2 1.0 kg/ cm² multiply the Torque values by following factors> Spring Range ( Kg/cm² ) Multiple Factor 0.4 to 1.2 252 0.6 to 1.4 436 0.8 to 1.6 966 Dimensions of Soft Seated utterfly Valves 2 3 1 Valve ctuator 1 2 3 size model F / F D STD TM SM 50 PDS-055-90º 50 55 70 270 286 125 500 750 775 65 PDS-055-90º 48 60 85 280 286 125 500 750 775 80 PDS-055-90º 48 65 100 290 286 125 500 750 775 100 PDS-055-90º 54 80 125 315 286 125 500 750 775 150 PDS-055-90º 62 110 160 360 286 125 500 750 775 200 PDS-095-90º 69 135 175 425 371 125 525 775 800 250 PDS-140-90º 80 165 230 470 443 150 725 1075 1000 300 PDS-140-90º 82 195 250 525 443 150 725 1075 1000 350 PDS-140G-90º 92 215 280 570 443 175 825 1225 1150 400 PDS-140G-90º 102 245 305 600 443 175 825 1225 1150 450 PDS-300-90º 126 270 335 645 616 225 925 N/ 1300 500 PDS-300-90º 127 295 380 660 616 225 925 N/ 1300 600 PDS-300-90º 134 390 450 725 616 225 925 N/ 1300 Service backed by Experience l 50

Dimensions of Sleeved Type utterfly Valves 2 3 1 vailable Torque for 90o ctuator (Lbc-in) Valve ctuator 1 2 3 F / F D size model STD TM SM 50 PDS-030-90º 49 46 100 195 218 110 370 620 645 65 PDS-055-90º 49 54 100 210 286 125 500 750 775 80 PDS-055-90º 50 62 110 215 286 125 500 750 775 100 PDS-055-90º 56 76 125 235 286 125 500 750 775 150 PDS-055-90º 56 105 160 260 286 125 500 750 775 200 PDS-095-90º 63 130 185 285 371 125 525 775 800 250 PDS-140-90º 73 156 225 350 443 150 725 1075 1000 300 PDS-140G-90º 83 185 250 380 443 175 825 1225 1150 350 PDS-140G-90º 83 200 285 420 443 175 825 1225 1150 400 PDS-300-90º 114 305 325 520 616 225 925 N 1300 450 PDS-300-90º 126 340 355 550 616 225 925 N 1300 500 PDS-300-90º 140 375 415 575 616 225 925 N 1300 600 PDS-300-90º 168 430 455 650 616 225 925 N 1300 Valve ctuator 1 2 3 F / F D size model STD TM SM 50 PDS-055-60º 47 54 75 255 286 135 550 800 825 65 PDS-055-60º 47 56 100 285 286 135 550 800 825 80 PDS-055-60º 47 65 100 285 286 135 550 800 825 100 PDS-055-60º 47 80 120 310 286 135 550 800 825 150 PDS-055-60º 56 110 150 360 286 135 550 800 825 200 PDS-095-60º 60 150 170 415 371 135 525 825 850 250 PDS-095-60º 65 170 225 450 371 135 725 825 850 300 PDS-140-60º 70 195 250 525 443 175 825 1075 1000 350 PDS-140-60º 70 210 290 565 443 175 825 1075 1000 400 PDS-140-60º 70 235 310 615 443 175 925 1075 1000 450 PDS-140G-60º 70 270 340 655 443 175 925 1175 1150 500 PDS-140G-90º 70 295 445 675 443 175 925 1175 1150 600 PDS-300-90º 168 430 455 650 616 225 925 N 1300 51 l Valve Solutions tel: 01274 531992 fax: 01274 531995 email: enquiry@valvesolutions.co.uk web: www.valvesolutions.co.uk

Dimensions of Metal to Metal utterfly Valves 2 3 1 Valve ctuator 1 2 3 F / F D size model STD TM SM 50 PDS-030-90º 47 54 75 250 218 110 370 620 645 65 PDS-030-90º 47 56 100 280 218 125 370 620 645 80 PDS-030-90º 47 65 100 280 218 110 370 620 645 100 PDS-030-90º 47 80 120 305 218 110 370 620 645 150 PDS-055-90º 56 110 150 360 286 110 500 750 775 200 PDS-055-90º 60 150 170 415 286 110 500 750 775 250 PDS-095-90º 65 170 225 450 371 125 525 775 800 300 PDS-095-90º 70 195 250 505 371 125 525 775 800 350 PDS-140-90º 70 210 290 560 443 150 725 1075 1000 400 PDS-140-90º 114 235 310 610 443 150 725 1075 1000 450 PDS-140-90º 70 270 340 650 443 150 725 1075 1000 500 PDS-140G-90º 70 295 445 675 443 175 825 1225 1150 Valve ctuator 1 2 3 F / F D size model STD TM SM 50 PDS-030-60º 47 54 75 255 286 135 550 800 825 65 PDS-055-60º 47 56 100 285 286 135 550 800 825 80 PDS-055-60º 47 65 100 285 286 135 550 800 825 100 PDS-055-60º 47 80 120 310 286 135 550 800 825 150 PDS-055-60º 56 110 150 360 286 135 550 800 825 200 PDS-095-60º 60 150 170 415 371 135 575 825 850 250 PDS-095-60º 65 170 225 450 371 135 575 825 850 300 PDS-140-60º 70 195 250 525 443 175 725 1075 1000 350 PDS-140-60º 70 210 290 565 443 175 725 1075 1000 400 PDS-140-60º 70 235 310 615 443 175 725 1075 1000 450 PDS-140-60º 70 270 340 655 443 175 775 1175 1150 500 PDS-140G-90º 70 295 445 675 443 175 775 1175 1150 Service backed by Experience l 52