HBE 24 SCREW & CRIMP TERMINATED INSERTS

Similar documents
HEAVY DUTY CONNECTORS FOR INDUSTRIAL APPLICATIONS FAST CHECK

Heavy Duty ConnectorS. Fast Check

EPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands

Multi-Pole Rectangular Connectors Specifications Table

Sealed Sensor Connector (SSC) System

D-Subminiature EMI/RFI Shielding Interconnection Systems

94 Series - Socket overview for 55 series relays

Monobloc Insulator Rectangular Connectors

D-Sub adapter Cable entry protection with metric cable entries Cable entry protection with Pg cable entries

EPIC CIRCON M23 Series

Accessories Cannon offers a wide selection of. Accessories Selection Guide

Directory chapter 08. InduCom Robust and EMI protected D-Sub interfaces

Operating voltage from 10 KVDC to 15 kvdc. Operating current up to 13 A. 2-5 HV contacts. For cable sizes AWG 26-14

Shell material Insulator Contacts Sealing Temperature Mating Protection

General characteristics

Technical Data, High Power 2-way* Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc.

Fused Disconnect Terminal Blocks for Miniature Fuses with CAGE CLAMP connection, Series

Insulator Connector inserts: Polyamide (PA66) UL 94 V0 All connectors with different shielding material for different jacket and shield diameters.

Operator's Manual VERSA Compact Tiller and Cultivator. ILLUSTRATED PARTS BREAKDOWN Handle Bar Assembly

MICRO-CON-X 2-7 NEW PRODUCT BULLETIN C708

Amphenol Amphenol PCD Shenzhen. Xcel Power Mate TM.

Han K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/

MIL-DTL-38999Series III Composite Series

RMP SERIES INFORMATION GUIDE

06. har-mik INTERFACE CONNECTORS

Directory chapter 03 DIN Power (to 15 A) Types H, H 3, MH , MH Technical characteristics type H

Main catalogue. SNK Series Terminal Blocks Accessories Marking Solutions

MD CONNECTOR. 1Certified LR Miniature circular connectors. Standards

AUTO EJECT WP AUTOMATIC POWER LINE DISCONNECT AUTOMATIC EJECTORS. Section 7: Automatic Ejector Systems

SCE. Snatch Connector Electrical Series

about us In 2011, Switchcraft was acquired by HEICO Corporation and became part of their Electronic Technologies Group.

Cannon VG/CA-Bayonet. How to order VG Order reference. How to order Cannon Order reference. Explanation

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.

Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.

Circular & Rectangular Multi-Pole Connectors MPC06

ODU DOCK. Connector System for application in Robot-Docking and Tool-Changing Systems for more than plugging cycles

D X X - XX - XX - X X

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

Varicon. Series " x.130" x.150" Grid Pattern FEATURES TECHNICAL SPECIFICATIONS

General characteristics and technical data Series MCS

Wire. Socket (with polarizing guide) Wire can be connected without stripping cable insulation. IDC contacts. Rise in temperature ( C)

Digitrip Retrofit System for ITE K-3000, K-3000 S, K-4000 and K-4000 S Breakers

SUPERSEAL MIL-DTL-5015 TYPE REVERSE-BAYONET CONNECTORS: NOW WITH SUPERIOR SEALING, SHIELDING AND CRIMP CONTACT TERMINATION

Standard Hoods/Housings Han B Size 24 B

DT Series Technical Manual

7000 Series Buccaneer

SERIES MHV (H4) HIGH VOLTAGE CONNECTORS

97 series crimp type plugs with solid shells

Amphenol SCE2/Terrapin Series

EPIC CIRCON M23 Series

Fuseholders PAGE. Fuseholders.

P Panel Mount Receptacles PIN CONTACTS WITH CRIMP TERMINATION

P and P Receptacle PCB Hole Patterns

HYDROCON Standard Sealed Connectors

rev 1_ XML02

Multipole Industrial Connectors Aluminium enclosures - Cable glands and fittings

HAND CRIMP TOOL SPECIFICATION SHEET Order No (Replaces HTR1719C)

Castellated/Hex Nut. Insert Retaining Ring. Contact Insert

Miniature Rugged Connector Series

Amphenol-Tuchel Electronics 44 Series

8D Series D38999 Composite Series

R49 & R24 PRODUCT GUIDE

90 Series - Socket overview for 60 series relays

7000 Series Buccaneer


Side Door Sill Trim Plate Package Installation

NA1FC7T. Fuse holder terminal blocks

PXN12C DXN25C DXN37C MULTI-CONTACT CONNECTORS 10 A TECHNICAL FEATURES

D-subminiature Backshells - Two-Piece D*H Series

DIN WIRE APPLICATIONS Housings for wire applications are delivered without contacts. Contacts have to be ordered separately.

CL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V

I/O Card Interface Connectors

Single foot switches - PX and PA series

RA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.

8D Series D38999 Composite Series

HK-003,HC SERIES HK-003 HCSERIES. Modular Heavy-current connector WAIN 12-01

Han-Power Energy Bus Components

VG95234 Qualified Bayonet-Lock Connectors

HARTING. Interface Connectors. People Power Partnership

Standard Buccaneer IP68 BUCCANEER FOR POWER BUCCANEER POWER

Wall mounted cases W

ZCK-Y39 ZCK-Y49 ZCK-Y33 ZCK-Y34 ZCK-Y31 ZCK-D109 ZCK-D41 ZCK-D06 ZCK-M2H29 ZCK-M2H29

SECTION CONTENTS MODEL NO.

Features and Application

WifiTrax WMR-10 in Atlas RS-3

MULTICONTACT. FIND ALL INFORMATION ON OUR WEBSITE: marechal.com. Dimensions and certificates

12/8/2015 Print. 010 Casing bottom. 1/18

Product features & Overview. KA Linear actuators

6000 Series Buccaneer. Secure, quick connector mating and release. 30 twist locking Tamperproof lock prevents accidental un-mating

High Performance, Microminiature Circular Connectors

Crimpmate Range pitch 5.00

Series BHT. Specifications. B HT 6 pole + PE. B HT 10 pole + PE. B HT 16 pole + PE. B HT 24 pole + PE. Page

P r o d u c t o v e r v i e w

Product features & Overview. N1 - N4 A Rotary and part-turn actuators

Han Q 1/0 Axial Screw Protected. Available February 2017

ELECTRO-MECH SCOREBOARD CO.

WEIGHT / COST-SAVING Dummy Contact Sealing Plugs (DCSP) For reliable sealing of unused contact cavities without the use of electrical contacts

8D Series D38999 Stainless Steel Series

KVBS Reverse bayonet connectors for railway applications

2 EXPLODED VIEW AND PARTS LIST

Transcription:

1 HBE 24 SCREW & CRIMP TERMINATED INSERTS SCREW TERMINATED View from Cable Side CRIMP TERMINATED Panel Cut-Out Contacts Sold Separately These inserts fit in the HBE 24 Series Housings which are on the following pages. Screw Terminated with wire protection Screw Terminated without wire protection Crimp Terminated: Machined Plug 10.1960 10.1961 10.1860 Receptacle 10.1970 10.1971 10.1870 Crimp Contacts are on the next page. HBE 24 SCREWLESS SPRING CAGE CLAMP INSERTS Panel Cut-Out Same View from Cable Side as Screw & Crimp Termination Screwless Cage Clamp Plug 10.4003 Receptacle 10.4013 These inserts fit in the HBE 24 Series Housings which are on the following pages. 96

HBE 24 TERMINAL BLOCK ADAPTER INSERTS 1 View from Cable Side These terminal block inserts only fit in HBE 24 panel mount bases. Terminal Block: Right Ground Terminal Block: Left Ground Plug 70.3060 70.3070 Receptacle 70.3071 70.3061 One terminal block insert mates with one screw terminated insert. CONTACTS FOR HBE CRIMP TERMINATED INSERTS HBE MACHINED CONTACTS: DIAMETER 2.5MM mm2 0.5.75-1.0 1.5 2.5 4.0 AWG 20 18 16 14 12 Pin 11.1900 11.1901 11.1902 11.1903 11.1904 Silver Bags of 100 Socket 11.1950 11.1951 11.1952 11.1953 11.1954 Pin 11.1920 11.19 11.1922 - - Gold Socket 11.1970 11.1971 11.1972 - - Stripping Length (mm) Pin=7.4, Socket =7.3 Pin=7.4, Socket =7.3 Pin=7.4, Socket =7.3 Pin=7.4, Socket =7.3 Pin=7.4, Socket =7.3 TOOLS WIRE GAUGE: 0.5-4.0 MM2 Locator 11.1472 Crimp Dies 11.1471 Crimp Tool 11.1470 Removal Tool: 11.18 97

1 HBE 24 HOODS WITH SINGLE LEVER BOLTS 10.19 10.1119 10.1139 10.1239 10.19NP 10.1119NP 10.1139NP 10.1239NP 19.19 19.1119 19.1139 19.1239 70.1490 70.1492 70.1590 70.1592 hoods do not come with a neck. 70.1490NP 70.1492NP 70.1590NP 70.1592NP 79.1490 79.1492 79.1590 79.1592 M HBE 24 HIGH PROFILE HOODS WITH SINGLE LEVER BOLTS 70.1444 70.1446 70.1544 70.1546 70.1444NP 70.1446NP 70.1544NP 70.1546NP 79.1444 79.1446 79.1544 79.1546 70.1494 70.1496 70.1594 70.1596 hoods do not come with a neck. 70.1494NP 70.1496NP 70.1594NP 70.1596NP 79.1494 79.1496 79.1594 79.1596 M 98

HBE 24 PANEL MOUNT BASES WITH SINGLE LEVER 1 Description Panel Mount without dust cover Panel Mount with dust cover Standard Grey Coating 10.10 10.1039 Black Coating (NEMA 4X) 70.17 70.1337 HBE 24 SURFACE MOUNT BASES WITH SINGLE LEVER # of Entries 2 Entries 1 Entry 2 with cover 1 with cover Size of Entry Standard Grey Coating 10.1059 10.1049 10.1099 10.1079 10.1059NP 10.1049NP 10.1099NP 10.1079NP 19.1059 19.1049 19.1099 19.1079 Black Coating (NEMA 4X) 70.1630 70.1620 70.1670 70.1660 70.1630NP 70.1620NP 70.1670NP 70.1660NP 79.1630 79.1620 79.1670 79.1660 M EMC PROTECTION Panel Mount Base Surface Mount & Cable Coupler Hood / 70.3503 70.3523 EMC Shielding is retrofittable. 79.3503 79.3523 99

1 HBE 24 HIGH PROFILE SURFACE MOUNT BASES WITH SINGLE LEVER # of Entries 2 Entries 1 Entry 2 Entries with dust cover 1 Entry with dust cover 70.1612 70.1614 70.1602 70.1604 70.1652 70.1654 70.1642 70.1644 70.1612NP 70.1614NP 70.1602NP 70.1604NP 70.1652NP 70.1654NP 70.1642NP 70.1644NP 79.1612 79.1614 79.1602 79.1604 79.1652 79.1654 79.1642 79.1644 70.16 70.1634 70.1622 70.1624 70.1672 70.1674 70.1662 70.1664 70.16NP 70.1634NP 70.1622NP 70.1624NP 70.1672NP 70.1674NP 70.1662NP 70.1664NP 79.16 79.1634 79.1622 79.1624 79.1672 79.1674 79.1662 79.1664 M HBE 24 CABLE COUPLER HOODS WITH SINGLE LEVER STANDARD PROFILE HIGH PROFILE Profile Standard High Profile 10.1279 10.1179 70.1424 70.1426 10.1279NP 10.1179NP 70.1424NP 70.1426NP 19.1279 19.1179 79.1424 79.1426 70.1430 70.14 70.1434 70.1436 hoods do not come with a neck. 70.1430NP 70.14NP 70.1434NP 70.1436NP 79.1430 79.14 79.1434 79.1436 M 100

HBE 24 HOODS WITH DOUBLE LEVER BOLTS 1 10.10 10.1110 10.1130 10.1230 10.10NP 10.1110NP 10.1130NP 10.1230NP 19.10 19.1110 19.1130 19.1230 70.1510 70.1512 70.1530 70.15 hoods do not come with a neck. 70.1510NP 70.1512NP 70.1530NP 70.15NP 79.1510 79.1512 79.1530 79.15 M HBE 24 HIGH PROFILE HOODS WITH DOUBLE LEVER BOLTS 70.1504 70.1506 70.1524 70.1526 70.1504NP 70.1506NP 70.1524NP 70.1526NP 79.1504 79.1506 79.1524 79.1526 70.1514 70.1516 70.1534 70.1536 hoods do not come with a neck. 70.1514NP 70.1516NP 70.1534NP 70.1536NP 79.1514 79.1516 79.1534 79.1536 M 101

1 HBE 24 PANEL MOUNT BASES WITH DOUBLE LEVERS Description Panel Mount without Dust Cover Standard Grey Coating 10.1020 Black Coating (NEMA 4X) 70.13 HBE 24 SURFACE MOUNT BASES WITH DOUBLE LEVERS # of Entries 2 Entries 1 Entry 10.1050 10.1040 10.1050NP 10.1040NP 19.1050 19.1040 70.1380 70.1370 70.1380NP 70.1370NP 79.1380 79.1370 M EMC PROTECTION Panel Mount Base Surface Mount & Cable Coupler Hood / 70.3503 70.3523 79.3503 79.3523 EMC Shielding is retrofittable. 102

HBE 24 HIGH PROFILE SURFACE MOUNT BASES WITH DOUBLE LEVERS 1 2 Entries 1 Entry 70.1362 70.1364 70.1352 70.1354 70.1362NP 70.1364NP 70.1352NP 70.1354NP 79.1362 79.1364 79.1352 79.1354 70.1382 70.1384 70.1372 70.1374 70.1382NP 70.1384NP 70.1372NP 70.1374NP 79.1382 79.1384 79.1372 79.1374 M HBE 24 CABLE COUPLER HOOD WITH DOUBLE LEVERS STANDARD PROFILE HIGH PROFILE Profile Standard High Profile 10.1270 10.1170 70.1404 70.1406 10.1270NP 10.1170NP 70.1404NP 70.1406NP 19.1270 19.1170 79.1404 79.1406 70.1410 70.1412 70.1414 70.1416 hoods do not come with a neck. 70.1410NP 70.1412NP 70.1414NP 70.1416NP 79.1410 79.1412 79.1414 79.1416 M 103

1 HBE 24 HOODS WITH DOUBLE LEVERS 10.1220 10.1120 10.1140 10.1240 10.1220NP 10.1120NP 10.1140NP 10.1240NP 19.1220 19.1120 19.1140 19.1240 70.1560 70.1562 70.1580 70.1582 hoods do not come with a neck. 70.1560NP 70.1562NP 70.1580NP 70.1582NP 79.1560 79.1562 79.1580 79.1582 M HBE 24 HIGH PROFILE HOODS WITH DOUBLE LEVERS 70.1554 70.1556 70.1574 70.1576 70.1554NP 70.1556NP 70.1574NP 70.1576NP 79.1554 79.1556 79.1574 79.1576 70.1564 70.1566 70.1584 70.1586 hoods do not come with a neck. 70.1564NP 70.1566NP 70.1584NP 70.1586NP 79.1564 79.1566 79.1584 79.1586 M 104

HBE 24 PANEL MOUNT BASES WITH DOUBLE LEVER BOLTS 1 Description Panel Mount with Dust cover Panel Mount without cover Standard Grey Coating 10.1030 10.1031 Black Coating (NEMA 4X) 70.1335 - STANDARD PROFILE HBE 24 SURFACE MOUNT BASES WITH DOUBLE LEVER BOLTS HIGH PROFILE # of Entries 2 Entries 1 Entry High Profile with 2 Entries High Profile with 1 Entry 10.1090 10.1070 70.1462 70.1464 70.1452 70.1454 10.1090NP 10.1070NP 70.1462NP 70.1464NP 70.1452NP 70.1454NP 19.1090 19.1070 79.1462 79.1464 79.1452 79.1454 70.1480 70.1470 70.1482 70.1484 70.1472 70.1474 70.1480NP 70.1470NP 70.1482NP 70.1484NP 70.1472NP 70.1474NP 79.1480 79.1470 79.1482 79.1484 79.1472 79.1474 M EMC PROTECTION Panel Mount Base Surface Mount & Cable Coupler Hood / 70.3503 70.3523 EMC Shielding is retrofittable. 79.3503 79.3523 105