B -6 Parts 6. Manifold L or P Assembly Parts List SWThe manifold assembly includes the manifold block, manifold filter, pressure relief valve, and drain valves. Depending on the configuration of the melter, it also includes the circulation control valve, the pressure control valve, or the air-piloted pressure control valve as appropriate. See Figure B -. 0 3 Manifold L, 6-port, internal circulating, reverse-flush filter, pressure control valve 0 30 Manifold L, 6-port, internal circulating, reverse-flush filter, air-piloted pressure control valve (MPC only) 0 3 Manifold P, 6-port, internal circulating, reverse-flush filter, circulation control valve - - - - - - Manifold block 0 3 O-ring, Viton,. x.0 x 0.063 in. (pkg of ) A 3 9 Screw, special, hex-head, M8-. x 80 mm (pkg of ) B 9 Washer, flat, narrow, M8 (pkg of ) 0 3 Valve, pressure relief C 6 0 3 Manifold filter, reverse-flush D - - - - - - Adapter, filter bung/manifold E, F 8 98 30 Pin, groove, type A, 0.08 x 0.00 in. 9 0 3 Heat exchanger 0 0 3 Plug, O-ring, straight thread, / 6 - (pkg of ) B 09 0 O-ring, Viton,.0 in. tube (pkg of ) 0 Plug, O-ring, 9 / 6-8, straight-thread (pkg of 8) 8 B, G 3 0 6 O-ring, Viton, (pkg of 8) 8 G 0 30 Valve, pressure control (includes O-ring) B, H 0 3 Valve, circulation control (includes O-ring) B, H 60 3 Valve, air-piloted pressure control (includes O-ring) (MPC only) B 0 9 O-ring, Viton, 0.0 in. tube (pkg of ) 6 6 Plug, O-ring, straight, 3 / 8 - (includes O-ring) B 6 0 Valve, drain B, C, F 8 0 O-ring, valve, 0.0 x 0.3 x 0.063 in. (pkg of ) 9 0 Backup ring, single, / x 3 / 8 in. (pkg of ) 0 98 096 Screw, pan-head, slotted, M x 8 mm A 983 03 Washer, lock, split, M 98 0 Pin, roll 3 - - - - - - Stop, filter, reverse-flush A, B NOTE A: Apply O-ring lubricant, part 900 3. B: Apply anti-seize lubricant, part 900 3. C: Apply paste, part 900 36. D: Refer to Manifold Filter Parts List. E: Apply cylindrical retaining adhesive, part 900 9. F: Refer to Manifold Assembly Service Kits. G: Note quantity, more than one package is needed. H: Refer to Pressure Control Valve Parts List. Continued on next page BEN-09-[3-MANPARTS]-
Parts B - Item Part Description Quantity NS 9 6 Connector, hose, 6 NS 9 66 Connector, hose, 90 6 NOTE A: Apply O-ring lubricant, part 900 3. B: Refer to Manifold Assembly Service Kits. NS: Not Shown Note 6 3 8 0 8 8 6 9 0 3 3 9 3060A Fig. B - Manifold Assembly Parts BEN-0-[3-MANPARTS]-
B -8 Parts Manifold Filter Parts List See Figure B -. 0 3 Manifold filter, reverse-flush 88 09 Bung 88 09 Core 3 88 09 Screen, 0.006 mesh,.38 in. A 98 Screw, round-head, 0-3 x 6. in. B 88 093 Spring A 6 Cap A 9 0 O-ring, Viton,.000 x.88 x 0.09 in. A 8 98 303 Pin, roll, 0. x 0.0 in. A 9 98 30 Pin, roll, 0. x 0.00 in. 0 9 Handle A 6 Driver, handle A 98 88 Screw, flat-head, M x 6 mm 3 A 3 88 9 Pin, adjusting, filter, run/drain A NOTE A: Refer to Manifold Assembly Service Kits. B: Apply anti-seize lubricant, part 900 3. 0 3 8 9 3 6 033A Fig. B - Manifold Assembly Parts BEN-09-[3-MANPARTS]-
Parts B -9 Manifold Assembly Service Kits See Figure B -. Service kits contain all the parts typically required for the complete replacement of an assembly. Part Description Contains 0 Manifold filter assembly replacement Items, 8, 3 0 Manifold filter bung adaptor replacement Items, 8, 3 0 Manifold filter screen and O-ring replacement Not shown 96 Manifold screws and tank O-rings replacement Items, 3, 0 39 Manifold plugs and O-rings replacement Items, 6 0 38 Manifold O-rings replacement Items,, 3,, 8 0 3 Drain valve replacement Items, 8, 9, 0, 0 3 Heat exchanger plug and O-ring replacement Items 0 and Manifold Filter Service Kits See Figure B -. Service kits contain all the parts typically required for the complete replacement of an assembly. Part Description Contains 0 Manifold filter screen and O-ring replacement Items 3,, 0 6 Manifold filter cap replacement Items 6, 8, 0,,, 3 Manifold Assembly UpTime Packs UpTime packs contain a selection of service kits and are available at a substantial price discount. Each service kit may also be ordered individually. Refer to Manifold Assembly Service Kits to determine the contents of each kit. Part Description Contains 0 3 UpTime Pack for manifolds L and P Service kit 0, manifold filter screen and O-ring Service kit 0 38, manifold O-rings 0 38 UpTime Plus Pack for manifolds L and P Service kit 0, manifold filter screen and O-ring Service kit 0 3, manifold filter assembly Service kit 0 39, manifold plugs and O-rings Service kit 0 3, heat exchanger plug and O-ring Part 88 0, pressure relief valve BEN-0-[3-MANPARTS]-
B -30 Parts Circulation Control Valve Parts List See Figure B -6. 36 6 Circulation control valve A 36 Body 36 3 Spool 3 90 0 O-ring, Viton, 0.39 ID x 0.0 in. 90 9 O-ring, Viton, 0.83 x 0.938 x 0.063 in. 9 039 O-ring, Viton, 3 / in. tube 6 98 6 Screw, set, dog, M x 8 mm B 98 0 Nut, hex, M NOTE A: Apply anti-seize lubricant, part 900 3. B: Apply retaining cylindrical adhesive, part 900 9. 3 6 063A Fig. B -6 Circulation Control Valve Parts BEN-09-[3-MANPARTS]-
Parts B -3 Pressure Control Valve Parts List See Figure B -. 0 30 Pressure control valve 98 830 Screw, socket-head, M6 x mm A - - - - - - Body 3 696 Piston 9 039 O-ring, Viton, 3 / in. tube B 90 9 O-ring, Viton, 0.83 x 0.938 x 0.063 in. B 6 - - - - - - Screw, lock, hollow, 3 / -6 x 0.3 in. C - - - - - - Seat, needle, 90 tip 8 - - - - - - Needle, valve control, 90 tip 9 98 036 Spring, compression 0 90 33 O-ring, Viton, 0.6 ID x 0.00 in. 98 03 Nut, hex, M6 NOTE A: Apply anti-seize lubricant, part 900 3. B: Apply O-ring lubricant, part 900 3. C: Apply retaining cylindrical adhesive, part 900 9. 9 6 0 3 8 306A Fig. B - Pressure Control Valve Parts Recommended Spare Parts Nordson Corporation recommends storing the following spare parts and supplies. Part Description Recommended Quantity 0 3 UpTime Pack, manifolds L and P 0 38 UpTime Plus pack, manifolds L and P 900 36 Sealant, paste 900 3 Lubricant, O-ring, Parker, oz 900 9 Adhesive, retaining cylindrical 900 3 Lubricant, Never-Seez, 6-oz can BEN-0-[3-MANPARTS]-