e-motion TL All-electric, tie-bar-less
ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface excellent platen parallelism encapsulated toggle levers perfect clamping force distribution ENGEL e-motion TL high level of process reliability short cycle times compact design low maintenance costs The smaller the parts, the higher the quality and precision requirements The new ENGEL e-motion TL defines a new standard in the manufacturing of very small precision parts. It is the carefully considered combination of the flexible, all-electric ENGEL e-motion machine solution with the proven ENGEL tie-bar-less design. Its perfect platen parallelism and excellent dynamic thus give you the answers to fast and trouble-free production from complex micro-connectors through to optical parts in cleanroom quality. e-motion TL_3
ENGEL e-motion TL ENGEL e-motion TL generously dimensioned, barrier-free mould mounting surface More flexibility thanks to proven ENGEL tie-bar-less design: the ENGEL e-motion TL's innovative frame concept gives you optimum access to the mould area while offering a generously dimensioned mould mounting surface. Your benefits: thanks to its compact, lightweight design, the ENGEL e-motion TL can be deployed wherever needed with optimum results. excellent platen parallelism At ENGEL, platen parallelism is not just the sum of all manufacturing tolerances, as is the case with conventional machines: the ENGEL e-motion TL's is precisely set up prior to delivery using high-precision platen parallelism adjustment system. This enables retroactive adjustment later on, thus ensuring a long service life of both the machine and the mould. encapsulated toggle levers Production to cleanroom standards: ENGEL's patented toggle lever sealings ensure that no oil whatsoever can escape from the high quality bushings. All lubrication points are supplied simultaneously via metering elements, while the oil pressure is continually monitored. perfect clamping force distribution Minimal tolerances, maximum output: FEM-designed mould mounting platens guarantee perfect clamping force distribution (max. deviation 2%). est precision and fewer rejects guaranteed for highly sensitive components such as lenses for cell phone cameras. compact design Space-saving production with machines up to two clamping force classes lower: the new ENGEL e-motion TL makes this possible thanks to ENGEL's proven tie-bar-less technology. The generously dimensioned mould mounting surface gives you the ability to install larger moulds on this compact machine. And thanks to the smaller footprint, you can save valuable floor space. low maintenance costs Long service life thanks to optimized lubrication: the ENGEL e-motion TL features permanent oil bath lubrication of the ball screw spindles. This guarantees constant lubrication conditions and removes the need for separate oil cooling. Your benefits: one oil change per year is absolutely sufficient. high level of process reliability Perfect control for dynamic injection processes: in the case of the ENGEL e-motion TL, all relevant positions are measured via the encoders on the servo-motors (repeat accuracy +/- 0.01 ). Injection, holding and back pressure measuring is handled via a pressure diaphragm directly connected to the screw. The maintenance-free pressure sensor also impresses with its high resolution and durability. 4_e-motion TL e-motion TL_5
ENGEL e-motion 30 TL ENGEL e-motion 30 TL Clamping force tonnes/kn 30 / 300 Opening stroke 230 Mould installation height 150 330 Mould mounting platen h x v 440 x Delivery chute width 3 Ejector stroke 75 Ejector force kn 10 Max. mould weight moving platen kg 230 Dry cycle time sec/ 0.9 / 0 ENGEL e-motion 30 TL 50 Screw diameter 15 / 18 / 15 / 18 / 15 / 18 Plasticizing stroke 80 80 80 Max. injection capacity cm 3 14.1 /.4 / 25.1 14.1 /.4 / 25.1 14.1 /.4 Screw speed rpm Screw torque Nm 45 / 75 / 45 / 75 / 45 / 75 / L/D screw length L/D 24 24 24 Plasticizing capacity g/sec 2.8 / 4.2 / 6.0 2.8 / 4.2 / 6.0 2.8 / 4.2 Injection rate cm 3 /sec 58 / 84 / 104 88 / 127 / 157 141 / 4 Spec. injection pressure bar 2 / 2 / 00 2 / 2 / 00 2 / 2 Max. holding pressure bar 2 / 2 / 1800 2 / 2 / 1800 2 / 2 Nozzle stroke 0 0 0 Nozzle contact force kn 6_e-motion TL e-motion TL_7
ENGEL e-motion 50 TL ENGEL e-motion 50 TL Clamping force tonnes/kn 50 / 500 Opening stroke 270 Mould installation height 350 Mould mounting platen h x v 550 x 500 Delivery chute width Ejector stroke 75 Ejector force kn Max. mould weight moving platen kg 350 / Dry cycle time sec/ 0.9 / 0 ENGEL e-motion 50 TL 50 Screw diameter 15 / 18 / 15 / 18 / 15 / 18 Plasticizing stroke 80 80 80 Max. injection capacity cm 3 14.1 /.4 / 25.1 14.1 /.4 / 25.1 14.1 /.4 Screw speed rpm Screw torque Nm 45 / 75 / 45 / 75 / 45 / 75 / 171 / 230 / 300 171 / 230 / 300 171 / 230 / 300 L/D screw length L/D 24 24 24 24 / 24.8 /.5 24 / 24.8 /.5 24 / 24.8 /.5 Plasticizing capacity g/sec 2.8 / 4.2 / 6.0 2.8 / 4.2 / 6.0 2.8 / 4.2 Injection rate cm 3 /sec 58 / 84 / 104 88 / 127 / 157 141 / 4 84 / 109 / 157 126 / 163 / 235 171 / 221 / 318 Spec. injection pressure bar 2 / 2 / 00 2 / 2 / 00 Max. holding pressure bar 2 / 2 / 1800 2 / 2 / 1800 Nozzle stroke 0 0 0 Nozzle contact force kn 170 8_e-motion TL e-motion TL_9
ENGEL e-motion 80 TL ENGEL e-motion 80 TL ENGEL e-motion 80 TL 170 50 310 Screw diameter 15 / 18 / 15 / 18 / 15 / 18 Plasticizing stroke 80 80 80 Max. injection capacity cm 14.1 /.4 Screw speed rpm Screw torque Nm 45 / 75 / 45 / 75 / 100 L/D screw length L/D 24 24 24 Ejector force kn 40 g/sec 2.8 / 4.2 / 6.0 2.8 / 4.2 / 6.0 2.8 / 4.2 Max. mould weight moving platen kg 570 / 133 Injection rate cm /sec 58 / 84 / 104 88 / 127 / 157 141 / 4 84 / 109 / 157 sec/ 1.2 / 3 Spec. injection pressure Clamping force tonnes/kn Opening stroke Mould installation height Mould mounting platen h x v 670 x 600 Delivery chute width Ejector stroke Dry cycle time 80 / 800 Plasticizing capacity 3 14.1 /.4 / 25.1 14.1 /.4 / 25.1 bar 45 / 75 / 171 / 230 / 300 171 / 230 / 300 171 / 230 / 300 24 / 24.8 /.5 24 / 24.8 /.5 24 / 24.8 /.5 2 / 2 / 00 126 / 163 / 235 171 / 221 / 318 15.0 / 21.9 15.0 / 21.9 15.0 / 21.9 157 / 214 2 / 2 / 00 2 / 2 / 1800 235 / 3 442 / 601 2 / 00 Max. holding pressure bar Nozzle stroke 0 0 0 kn Nozzle contact force 10_e-motion TL 3 2 / 2 / 1800 2 / 1800 _11 e-motion TL
ENGEL e-motion TL ENGEL e-motion TL ENGEL e-motion TL 170 310 440 Screw diameter 35 / 40 35 / 40 35 / 40 Plasticizing stroke 175 175 175 550 Max. injection capacity cm 168 / 2 168 / 2 168 / 2 785 x 680 Screw speed rpm Delivery chute width 550 Screw torque Nm 171 / 230 / 300 171 / 230 / 300 171 / 230 / 300 605 605 605 Ejector stroke 150 L/D screw length L/D 24 / 24.8 /.5 24 / 24.8 /.5 24 / 24.8 /.5 Ejector force kn 40 15 / 21.9 15 / 21.9 21.9 / 33.3 21.9 / 33.3 21.9 / 33.3 Max. mould weight moving platen kg 1000 / 183 235 / 3 442 / 601 171 / 223 258 / 337 sec/ 1.2 / 3 Clamping force tonnes/kn / 0 Opening stroke Mould installation height Mould mounting platen h x v Dry cycle time Plasticizing capacity Injection rate Spec. injection pressure g/sec cm3/sec 84 / 109 / 157 bar 15 / 21.9 126 / 163 / 235 171 / 221 / 318 157 / 214 2 / 2 / 00 2 / 00 2 / 00 481 / 6 2 / 1940 Max. holding pressure bar Nozzle stroke 305 305 305 kn Düsenanpresskraft 12_e-motion TL 3 2 / 2 / 1800 2 / 1800 2 / 1800 2 / 1800 _13 e-motion TL
ENGEL services always there where you need us Your concern is our challenge It is important to always keep your injection moulding equipment in top shape and constantly available. The wide range of services offered by ENGEL ensures that you can produce competitively at any time. It does not matter whether your production cell is a single machine or a complex integrated system solution. ENGEL makes it possible for you to utilise all options for optimisation at any time, and therefore consistently get the most out of your machine over the long term. In addition, we offer professional training for machine operators as well as fast worldwide delivery of spare parts and their professional replacement. Diverse maintenance contracts also guarantee top-level machine availability. Our goal is the best possible performance of your ENGEL machinery. Support we assist you on-site save costs incurred by downtime iediate support 24/7, worldwide knowledgeable help from the ENGEL service team for ENGEL injection moulding machines of any generation for all ENGEL technologies and any control unit version Upgrade install reliable added value for all ENGEL injection moulding machines professional upgrade solutions to supplement and optimise equip machines for use with completely new applications utilise machines with greater cost-effectiveness 560 of the best equipped service technicians 55 support hotline technicians 9 production plants 29 sales subsidiaries 60 representatives Know-how increase your competence thorough training with a comprehensive transfer of know-how make optimal use of machine potential individual seminars and training programs for you and your staff informative events on industry-specific topics take advantage of efficient, targeted and practical information, instruction and training either at your own facility or at one of the worldwide ENGEL training centres 14_e-motion TL e-motion TL_15
EN 18-09 ENGEL AUSTRIA GmbH Ludwig-Engel-Straße 1 4311 Schwertberg, Austria Tel. +43 50 6 0 Fax +43 50 6 3009 sales@engel.at www.engelglobal.com The information, product features and pictures contained in this brochure are intended exclusively as a technical guide. ENGEL is not responsible for any technical changes or print/typographical errors. Reproduction in whole or in part is prohibited without the prior written consent of ENGEL AUSTRIA GmbH.