PARTS MANUAL crary WIND SYSTEM

PARTS MANUAL crary WIND SYSTEM Manual PN 29776-00 R072507 Companion to 29775-00 lexion F25, F30, f535 MAX FLEX, F540 MAX FLEX

HOW TO REACH US ADDRESS HOURS TELEPHONE FAX NUMBER E-MAIL INTERNET Crary Industries 237 12th St. NW P.O. Box 849 West Fargo, ND 58078-0849 Mon. - Fri. 8 A.M to 5 P.M. Central Time For Parts and Service: 1-800-247-7335 Fax: 1-701-282-9522 For Service: serv@crary.com Visit us on the web @ www.crary.com Send us Your Warranty Card Please take time to fill in the information requested on the card. When you send in the completed card to us, we register your Crary Wind System and start coverage under our limited warranty. Two serial number stickers are included with each CWS. The decals are located on the CWS manifold. Place one sticker on the warranty registration card and mail it back to Crary Industries. Place the second sticker in the owner s manual for future reference.

Parts ordering information For service assistance or parts, contact your nearest authorized Crary dealer. Your nearest authorized Crary dealer will need to know the serial number of your Crary Wind System to provide the most efficient service. See information below for how to identify and record the serial number for your Air Reel. ILLUSTRATION AND TEXT This parts catalog is arranged to assist in identifying CWS parts. All parts are illustrated in either assembled or exploded views. All illustrations are located on the left hand page with the associated parts information on the right. Except for some common hardware, all parts are identified with an item number that corresponds to the Item column on the parts information page. The text pages list the reference number, part number, part description and the quantity required. REPLACEMENT PARTS Only genuine Crary replacement parts should be used to repair the CWS. Crary replacement parts are available from your Crary Dealer. To obtain prompt, efficient service, remember to give the dealer the correct part description and serial number of the CWS. When ordering parts for your unit provide the following: 1. The SERIAL NUMBER of your CWS. 2. The PART NUMBER of the part. 3. The PART DESCRIPTION. 4. The QUANTITY needed. Serial number location WARNING We urge using only genuine replacement parts, which meet all the latest requirements. Replacement parts manufactured by others could present safety hazards, even though they may fit on this unit. Give your authorized Crary dealer the serial number of your CWS when ordering parts, requesting service, or any other information. Record the serial number in the space provided below and on the warranty and registration card. The serial number is located on the manifold. Serial Number MANUFACTURED BY CRARY INDUSTRIES WEST FARGO, NORTH DAKOTA 58078 U.S.A. SERIAL NUMBER XXXXXX MANUFACTURED IN U.S.A. Page

SECTION Contents PAGE AIR MANIFOLD (25 HEADERS)... 48 AIR MANIFOLD (30-40 HEADERS)... 49 DRIVELINE/C FLANGE ASSEMBLY (LH DRIVE KITS)... 26 DRIVELINE/C FLANGE ASSEMBLY (RH DRIVE KITS)... 24 DRIVELINE, SECONDARY (LH DRIVE KITS)... 28 DROP TUBE KIT... 50 FAN HOSE ASSEMBLY (25-30 HEADERS)... 30 FAN HOSE ASSEMBLY (35 HEADERS)... 32 FAN HOSE ASSEMBLY (RH) (35-40 HEADERS)... 34 FAN HOSE ASSEMBLY (LH) (40 HEADERS)... 36 GEARBOX/FAN (LEFT HAND)... 20 GEARBOX/FAN (RIGHT HAND)... 18 GEARBOX MOUNT/DRIVE KIT (25-30 HEADERS)... 6 GEARBOX MOUNT/DRIVE KIT (35-40 HEADERS)... 7 GEARBOX MOUNT/NEUTRAL DRIVE SHAFT (40 HEADERS)... 8 GEARBOX REPLACEMENT PARTS... 22 LEFT HAND DRIVE KIT (40 HEADERS)... 16 REEL ARM MOUNT (CENTER) (40 HEADERS)... 46 REEL ARM MOUNT (LH) (25-30 HEADERS)... 38 REEL ARM MOUNT (LH) (35-40 HEADERS)... 42 REEL ARM MOUNT (RH) (25-30 HEADERS)... 40 REEL ARM MOUNT (RH) (35-40 HEADERS)... 44 RIGHT HAND DRIVE KIT (25 HEADERS)... 10 RIGHT HAND DRIVE KIT (30 HEADERS)... 12 RIGHT HAND DRIVE KIT (35-40 HEADERS)... 14 SWITCH/MOUNT PLATE ASSEMBLY... 51

Parts Catalog Crary Wind System Lexion Headers F25, F30, F535 MAX FLEX, F540 MAX FLEX Page

GEARBOX MOUNt/DRIVE kit 25-30 HEADERS 07/07 GEARBOX MOUNT/DRIVE KIT (25672) ITEM PART NUMBER DESCRIPTION QTY 1 12457 BUSHING, 1-3/8 SD 2 2 15012 BOLT, 1/2 X 1 HEX HD 4 3 15013 BOLT, 1/2 X 1-1/4 HEX HD 8 4 15097 WASHER, 1/2 SAE FLAT 12 5 15282 BOLT, 5/16 X 1-1/2 GR5 HEX CPS ZP 6 6 15498 KEY, 5/16 X 1-3/4 SQUARE 2 7 22696 WELDMENT, SHIELD 2 8 25671-12 PLATE, GEARBOX MOUNT 1 Page

07/07 35-40 HEADERS GEARBOX MOUNT/DRIVE KIT GEARBOX MOUNT/DRIVE KIT (29133) ITEM PART NUMBER DSECRIPTION QTY 1 12457 BUSHING, 1-3/8 SD 2 2 15012 BOLT, 1/2 X 1 HEX HD 4 3 15013 BOLT, 1/2 X 1-1/4 HEX HD 8 4 15097 WASHER, 1/2 SAE FLAT 12 5 15282 BOLT, 5/16 X 1-1/2 GR5 HEX CPS ZP 6 6 15498 KEY, 5/16 X 1-1/2 SQUARE 2 7 22696 WELDMENT, SHIELD 2 8 27945-12 PLATE, GEARBOX MOUNT 1 Page

GEARBOX MOUNT/ NEUTRAL DRIVE SHAFT 40 HEADERS 07/07 Page

07/07 40 HEADERS GEARBOX MOUNT/ NEUTRAL DRIVE SHAFT GEARBOX MOUNT/DRIVE KIT (29874) ITEM PART NUMBER DESCRIPTION QTY 1 29838-00 RH GEARBOX/FAN (7.269:1) 1 2 29833-12 GBOX DRIVE LH SHIELD 1 3 29832-12 GBOX DRIVE RH SHIELD 1 4 29831-12 HINGE, SHIELD 2 5 29825-12 BRACKET, GEARBOX MT. 1 6 15612 BOLT, 1/2 X 1-1/4 SERRATED FLANGE 4 7 15390 BOLT, 5/16 NC X 6-1/2 GR5 HCS ZP 2 8 15356 NUT, 5/16 NE NYLOCK ZP 2 9 15097 WASHER, 1/2 SAE FLAT ZP 4 10 15013 BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP 4 11 15012 BOLT, 1/2 X 1 GR5 HEX CAPSCREW ZP 4 12 0125-0060-00 LATCH, FLEXIBLE DRAW 2 13 15423 SCW, MCH 10-24 X 1/2 PAN HD, PH ZP 4 14 15557 BOLT, 10-24 X 3/4 HHCS G8 PLAIN 4 15 15397 NUT, 10/24 NYLOCK TYPE NM, ZP 8 OPTIONAL NEUTRAL DRIVE SHAFT KIT (29884) ITEM PART NUMBER DESCRIPTION QTY 16 15260 WASHER, 3/8 SAE FLAT 6 17 15388 NUT, 3/8 NYLOCK 6 18 17060 FLANGETTE, 72MSI 1-3/8 4 19 17059 BEARING, 1-3/8 ROUND BORE 2 20 15057 BOLT, 3/8 X 1 CRG 6 21 29834-00 SHAFT, 1-3/8 S SPLINE STUB 1 Page

RIGHT HAND DRIVE KIT 25 HEADERS 07/07 Page 10

07/07 25 HEADERS RIGHT HAND DRIVE KIT RIGHT HAND DRIVE KIT, 25 HEADERS (25674) ITEM PART NUMBER DESCRIPTION QTY 1 15003 BOLT, 5/16 X 3/4 HEX HD 3 2 15031 WASHER, 3/8 FLAT 6 3 15051 NUT, 3/8 SERRATED FLANGE 9 4 15057 BOLT, 3/8 X 1 CARRIAGE 9 5 15153 NUT, 5/16 HEX 2 6 15219 BOLT, 5/16 X 1 HEX HD 2 7 15250 WASHER, 5/16 FLAT 7 8 15498 KEY, 5/16 X 1-3/4 SQUARE 1 9 17059 BEARING, 1-3/8 ROUND BORE 1 10 17060 FLANGETTE, 72MS 1-3/8 2 11 23140 DRIVESHAFT SHIELD (22 ) 1 12 24034 DRIVELINE/C FLANGE ASSEMBLY -L (SEE PAGES 24-25) 1 13 24039 SHIELD MOUNT PLATE ASSEMBLY 1 14 15689-00 BOLT, M10-1.5-30MM GR. 8.8 HWHCS YZP 2 15 24037-12 SHIELD, SLIP CLUTCH 1 16 24492-12 DRIVELINE SUPPORT BRACKET 1 17 25727-00 DRIVESHAFT 1 18 26045-12 BEARING MOUNT BRACKET 1 19 26046-12 MOUNT SUPPORT BRACKET 1 20 15402 NUT, 5/16-18 TINNERMAN U-TYPE 3 Page 11

RIGHT HAND DRIVE KIT 30 HEADERS 07/07 Page 12

07/07 30 HEADERS RIGHT HAND DRIVE KIT RIGHT HAND DRIVE KIT, 30 HEADERS (25675) ITEM PART NUMBER DESCRIPTION QTY 1 15003 BOLT, 5/16 X 3/4 HEX HD 3 2 15031 WASHER, 3/8 FLAT 6 3 15051 NUT, 3/8 SERRATED FLANGE 9 4 15057 BOLT, 3/8 X 1 CARRIAGE 9 5 15153 NUT, 5/16 HEX 2 6 15219 BOLT, 5/16 X 1 HEX HD 2 7 15250 WASHER, 5/16 FLAT 7 8 15498 KEY, 5/16 X 1-3/4 SQUARE 1 9 17059 BEARING, 1-3/8 ROUND BORE 1 10 17060 FLANGETTE, 72MS 1-3/8 2 11 21240 DRIVESHAFT SHIELD 1 12 24034 DRIVELINE/C FLANGE ASSEMBLY -L (SEE PAGES 24-25) 1 13 24039 SHIELD MOUNT PLATE ASSEMBLY 1 14 15689-00 BOLT, M10-1.5-30MM GR. 8.8 HWHCS YZP 2 15 24037-12 SHIELD, SLIP CLUTCH 1 16 24492-12 DRIVELINE SUPPORT BRACKET 1 17 25728-00 DRIVESHAFT 1 18 26045-12 BEARING MOUNT BRACKET 1 19 26046-12 MOUNT SUPPORT BRACKET 1 20 15402 NUT, 5/16-18 TINNERMAN U-TYPE 3 Page 13

RIGHT HAND DRIVE KIT 35-40 HEADERS 07/07 Page 14

07/07 35-40 HEADERS RIGHT HAND DRIVE KIT RIGHT HAND DRIVE KIT, 35-40 HEADERS ITEM PART NUMBER DESCRIPTION 35 (29785) QTY 1 15003 BOLT, 5/16 X 3/4 GR5 HEX HD ZP 3 3 2 15013 BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP 2 2 3 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 8 8 4 15097 WASHER, 1/2 SAE FLAT ZP 2 2 5 15250 WASHER, 5/16 FLAT ZP 3 3 6 15260 WASHER, 3/8 SAE FLAT ZP 12 12 7 15364 BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 4 4 8 15388 NUT, 3/8 NE NYLOCK ZP 8 8 9 15498 KEY, 5/16 X 1-1/2 SQUARE 1 1 10 17059 BEARING 1 3/8, INSERT 2 2 11 17060 FLANGETTE, 72MS RND 3BIT ZP 4 4 12 24034 DRIVELINE/C FLANGE ASSEMBLY-L (SEE PAGES 24-25) 1 1 13 24039 SHIELD MOUNT PLATE ASSEMBLY 1 1 14 14473-00 DRIVESHAFT SHIELD TUBE, LG 1 29052-00 DRIVESHAFT SHIELD TUBE, 53 1 15 24037-12 SLIP CLUTCH SHIELD 1 1 16 27946-12 BEARING MOUNT PLATE 2 2 17 27947-12 BEARING BRACKET MOUNT 1 1 18 19 27949-00 DRIVESHAFT (CAT- 40 RH) 1 29777-00 DRIVESHAFT (CAT-35 RH) 1 29053-00 DRIVESHAFT SHIELD TUBE, SM 1 29058-00 DRIVESHAFT SHIELD TUBE, 23.75 1 20 29131-12 PTO HOLDER WELDMENT 1 1 40 (29139) QTY Page 15

LEFT hand drive kit 40 HEADERS 07/07 Page 16

07/07 40 HEADERS LEFT HAND DRIVE KIT LH DRIVE KIT (29138) ITEM PART NUMBER DESCRIPTION QTY 1 17059 BEARING 1 3/8, INSERT 1 2 27946-12 BEARING MOUNT PLATE 1 3 17060 FLANGETTE, 72MS RND 3BIT ZP 2 4 15388 NUT, 3/8 NE NYLOCK ZP 7 5 15260 WASHER, 3/8 SAE FLAT ZP 7 6 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 5 7 15051 NUT, 3/8 SERRATED FLANGE NC ZP 3 8 29826-00 SICKLE/AUGER DRIVE SHAFT LEXION 1 9 27659-12 SLIP CLUTCH SHIELD 1 10 27657-00 SHIELD MOUNT ASSEMBLY 1 11 27947-12 BEARING BRACKET MOUNT 1 12 15097 WASHER, 1/2 SAE FLAT ZP 2 13 15013 BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP 2 14 15402 NUT, 5/16-18 TINNERMAN U-TYPE 3 15 15003 BOLT, 5/16 X 3/4 GR5 HEX HD ZP 3 16 15250 WASHER, 5/16 FLAT ZP 3 17 18978-00 DRIVELINE, HEADER SECONDARY (SEE PAGES 28-29) 1 18 29823-00 DRIVELINE/CLUTCH 1-3/8 ASSEMBLY (SEE PAGES 26-27) 1 19 29059-00 DRIVESHAFT SHIELD 36.50 1 Page 17

GEARBOX/FAN (RIGHT HAND) ALL MODELS 07/07 Page 18

07/07 ALL MODELS GEARBOX/FAN (RIGHT HAND) RH GEARBOX/FAN ASSEMBLY, 7.269:1 (22757) ITEM PART NUMBER DESCRIPTION QTY 1 22323 GEARBOX, FAR 7.269:1 (SEE PAGES 22-23) 1 2 21445 HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 1 3 15014 BOLT, 1/2 X 1-1/2 HEX HD 4 4 15049 NUT, 1/2 CENTERLOCK GRB ZP 4 5 21193 8 FAN RH SIDE W/ BUTTERFLY 1 6 15076 BOLT, 3/8 X 1 THREAD CUT 8 7 15099 WASHER, 7/8 SAE FLAT 2 8 14056-00 FAN ROTOR, 16.5 X 3 CW, 7/8 STL 1 9 15098 WASHER, 3/4 SAE FLAT 1 10 15055 NUT, 3/4 NF CASTLE 1 11 15068 PIN, 5/32 X 1-1/4 COTTER 2 12 21194 8 FAN LH SIDE W/ BUTTERFLY 1 13 15364 BOLT, 3/8 NC X 1-1/4 HEX HD 12 14 15051 NUT, 3/8 SERR FLANGE 12 15 22655 BASE 1 16 23152 WELDMENT, BASE STRAP 1 17 16449 BEARING, 5/8 2-BOLT FLNG 2 18 15238 BOLT, 1/4 X 3/4 CRG 4 19 23161 WELDMENT, SCREEN/BLADE 1 20 15129 WASHER, 5/8 SAE FLAT 2 21 23155 WELDMENT, PIVOT 1 22 23158 WELDMENT, SCREEN CLEANER 1 23 23163 WELDMENT, SCREEN CAP 1 24 15053 NUT, 1/4 SERR FLANGE 8 25 15001 BOLT, 1/4 X 3/4 HEX HD 4 26 15095 SCREW, NO. 14 X 1/2 TAPPING HWH ZP 6 27 7022 KEYSTOCK, 3/16 1 28 25644-12 WELDMENT, ACTUATOR MOUNT 1 29 25641-12 WELDMENT, VALVE ACTUATOR 1 30 25638-35 WELDMENT, INDICATOR 1 31 21444 PLATE, LARGE BUTTERFLY 1 32 15552 BOLT, #10-24 X 1 IN GR8 HCPS PLAIN 4 33 15397 NUT, #10X24 NYLOCK 4 34 13460-00 ACTUATOR, 2 STROKE WARNER 1 35 15342 BOLT, 1/4 X 1-1/2 HCS G5 ZP 2 36 15087 NUT, 1/4 CENTERLOCK 2 37 25592-12 WRAP, ROTARY SCREEN 1 Page 19

GEARBOX/FAN (LEFT HAND) 40 HEADERS 07/07 Page 20

07/07 40 HEADERS GEARBOX/FAN (LEFT HAND) LH GEARBOX/FAN ASSEMBLY, 7.269:1 ITEM PART NUMBER DESCRIPTION 27237-00 QTY 1 12457 BUSHING, 1-3/8 SD 2 2 13460-00 ACTUATOR, 2 STROKE WARNER 1 1 3 15001 BOLT, 1/4 X 3/4 HEX HD 4 4 4 15014 BOLT, 1/2 X 1-1/2 HEX HD 4 4 5 15049 NUT, 1/2 CENTERLOCK GRB ZP 4 4 6 15051 NUT, 3/8 SERR FLANGE 12 12 7 15053 NUT, 1/4 SERR FLANGE 8 8 8 15055 NUT, HST SPINDLE CASTLE 1 1 9 15068 PIN, 5/32 X 1-1/4 COTTER 2 2 10 15076 BOLT, 3/8 X 1 THREAD CUT 8 8 11 15087 NUT, 1/4 CENTERLOCK 2 2 12 15095 SCREW, NO. 14X1/2 TAPPING HWH ZP 6 6 13 15099 WASHER, 7/8 SAE FLAT 3 3 14 15129 WASHER, 5/8 SAE FLAT 2 2 15 15238 BOLT, 1/4 X 3/4 CRG 4 4 16 15342 BOLT, 1/4 X 1-1/2 HCS G5 ZP 2 2 17 15364 BOLT, 3/8 NC X 1-1/4 HEX HD 12 12 18 15397 NUT, #10X24 NYLOCK 4 4 19 15498 KEY, 5/16 X 1-3/4 SQ 2 20 15552 BOLT, #10-24 X 1 IN. GR8 HCPS PLAIN 4 4 21 15587 THRUST WASHER, 3/4 X 1-5/16 X.062 1 1 22 16449 BEARING, 5/8 2-BOLT FLNG. 2 2 23 17705 FAN ROTOR, 16.5 X 3 CCW, 7/8 STL 1 1 24 21193 8 FAN RH SIDE W/ BUTTERFLY 1 1 25 21194 8 FAN LH SIDE W/ BUTTERFLY 1 1 26 21444 PLATE, LARGE BUTTERFLY 1 1 27 21445 HUB/MOTOR MOUNT PLATE (8 IN. -B PILOT) 1 1 28 22323 GEARBOX, FAR 7.269:1 (SEE PAGES 44-45) 1 1 29 22655 BASE 1 1 30 23152 WELDMENT, BASE STRAP 1 1 31 23155 WELDMENT, PIVOT 1 1 32 23158 WELDMENT, SCREEN CLEANER 1 1 33 23163 WELDMETN, SCREEN CAP 1 1 34 25592-12 WRAP, ROTARY SCREEN 1 1 35 25638-35 WELDMENT, INDICATOR 1 1 36 25644-12 WELDMENT, ACTUATOR MOUNT 1 1 37 26383-12 WELDMENT, LH VALVE ACTUATOR 1 1 38 27532-12 WELDMENT, SCREEN/BLADE (8 - LH) 1 1 39 29834-00 SHAFT, 1-3/8 6 SPLINE STUB 1 40 7022 KEYSTOCK, 3/16 1 1 29839-00 QTY Page 21

GEARBOX REPLACEMENT PARTS ALL MODELS 07/07 Page 22

07/07 ALL MODELS GEARBOX REPLACEMENT PARTS GEARBOX REPLACEMENT PARTS (22323) ITEM PART NUMBER DESCRIPTION QTY 1 NPN 66 GEAR, SP BEV LH 19T 1 2 NPN 66 GEAR, SP BEV RH 29T 1 3 NPN 11 NUT, LOCK 3/4 NF 1 4 NPN 66 SHIM,.002 RED 2 5 NPN 66 SHIM,.005 BLUE 2 6 NPN SPEC HOUSING, SUBASSEMBLY 1 7 NPN SPEC HOUSING, PINION 1 8 NPN SPEC CAP, OPEN 2 9 NPN SPEC CAP, CLOSED 2 10 16821 SPEC SLEEVE, INPUT 1 11 16820 SPEC SHAFT, OUTPUT 1 12 NPN SPEC GEAR, INTG HEL LH 14T 1 13 NPN SPEC GEAR, HEL RH 81T 1 14 NPN SPEC SPACER 1 15 NPN SPEC SHIM,.002 RED 4 16 NPN SPEC SHIM,.005 BLUE 4 17 NPN SPEC SHIM,.002 RED 4 18 NPN SPEC SHIM,.005 BLUE 4 19 16815 BEARING, BALL 206NPP OR EQ 2 20 0201-0077-00 BEARING, 2.328 X.465 CUP 2 21 16817 BEARING, CUP 2 22 0201-0078-00 BEARING, 1.250 X.660 CONE 2 23 16819 BEARING, CONE 2 24 NPN SCREW, HEX CAP GR5 3/8NC X 1 4 25 NPN SCREW, HEX CAP GR5 5/16NC X 1 20 26 NPN SCREW, HEX CAP GR5 3/8NC X 1-1/4 8 27 NPN WASHER, 3/4 X 1-1/2 X 1/8 1 28 NPN WASHER, 1-17/64 X 1-3/4 X 1/8 2 29 NPN NUT, HEX 3/8NC 8 30 NPN KEY, P&W 1/4SQ X 15/16 1 31 NPN KEY, SQ END 3/4SQ X 15/16 1 32 NPN KEY, WOODRUFF 1/4 X 1 1 33 16814 RING, RETAINING 5160-118 1 34 NPN RING, BEVELED RET. N5002-244 1 35 NPN OIL, MOBILUBE SHC 75W-90 40 36 NPN NAME PLATE, CRARY 1 37 NPN PAINT, FLAT BLACK 5.120 38 NPN PLUG, PIPE SOCKET 1/4NPT 2 39 NPN PLUG, PIPE 1/2 O-RING BOXX 3 40 NPN PLUG, VENTED 1/8NPT, 1-5 PSI BALL 1 41 NPN SEAL, 472681 OR EQ 1 42 NPN SEAL, 32395 OR EQ 2 43 NPN O-RING, -044 1 44 NPN O-RING, -158 2 45 NPN ORING, -138 2 46 NPN SCREW, HEX CAP GR5 5/16NC X 3/4 1 47 NPN TAG, LUBRICATION 1 16125 GEARBOX SEAL & SHIM KIT (NOT SHOWN) 1 25318 GEARBOX, REBUILT (7.269:1) (NOT SHOWN) 1 Page 23

DRIVELINE/C FLANGE ASSEMBLY RH DRIVE KITS 07/07 Page 24

07/07 RH DRIVE KITS DRIVELINE/C FLANGE ASSEMBLY DRIVELINE/C-FLANGE ASSEMBLY (24034) ITEM PART NUMBER DESCRIPTION QTY 1 13914-00 COUNTER FLANGE, 1-3/8", 21 SPLINE, W/QD 1 2 15070 SCREW, 3/8" X 1" SQUARE HEAD SET 1 3 15219 BOLT, 5/16" X 1" HHCS NC GR5 ZP 6 4 15256 SCREW, 3/8" X 3/4" SQUARE HEAD SET ZP 1 5 15356 NUT, 5/16" NE NYLOCK ZP 6 6 16935 HEADER DRIVELINE W/CLUTCH (L) (SEE TABLE BELOW) 1 WALTERSCHEID DRIVELINE SERVICE PARTS ITEM PART NUMBER DESCRIPTION QTY 7 0883-0120-00 KIT, CROSS AND BEARING W-2400 2 8 12209 CHAIN, SHAFETY 1 9 12210 DECAL, OUT 1 10 12211 DECAL, IN 1 11 12215 YOKE, INBOARD 1B 1 12 12218 YOKE, INBOARD 2A 1 13 12220 CONE, 6 RIB SAFETY 2 14 12223 RING, SC25, BEARING 2 15 14714-00 YOKE, FLANGE 1 16 14722-00 CLUTCH, FRICTION 1 A 14061-00 SPRING, BELVILLE (WALTERSCHEID) 1 B 14062-00 SET, FRICTION DISC (WALTERSCHEID) 1 C 14720-00 YOKE, FLANGE 1 D 14721-00 HUB, CLUTCH 1 E 14736-00 PLATE, THRUST 1 F 15647 NUT, M10 X 1.5 HEX NYLOCK TYP NE YZP 6 G 15747-00 BOLT, M10 X 1.5 X 50 CLASS 8.8 HCPS 6 H 15748-00 BOLT, M12 X 1.75 X 65 CLASS 8.8 HCPS 1 J 15749-00 NUT, M12 X 1.75 HEX NYLOCK TYPE NE YZP 1 14728-00 PROFILE, INNER 1B, (SHORT) 17 14732-00 PROFILE, INNER 1B, (LONG) 1 PROFILE, INNER 1B, (MEDIUM) 14729-00 PROFILE, OUTER 2A, (SHORT) 18 14733-00 PROFILE, OUTER 2A, (LONG) 1 PROFILE, OUTER 2A, (MEDIUM) 14730-00 TUBE, INNER SHIELD, (SHORT) 19 14734-00 TUBE, INNER SHIELD, (LONG) 1 TUBE, INNER SHIELD, (MEDIUM) 14731-00 TUBE, OUTER SHIELD, (SHORT) 20 14735-00 TUBE, OUTER SHIELD, (LONG) 1 TUBE, OUTER SHIELD, (MEDIUM) 21 15575 PIN, M10 X 80, SPRING 2 Page 25

DRIVELINE/C FLANGE ASSEMBLY LH DRIVE KITS 07/07 Page 26

07/07 LH DRIVE KITS DRIVELINE/C FLANGE ASSEMBLY DRIVELINE/C-FLANGE ASSEMBLY (29823-00) ITEM PART NUMBER DESCRIPTION QTY 1 13914-00 COUNTER FLANGE, 1-3/8 21 SPLINE 1 2 15219 BOLT, 5/16 X 1 GR5 HHCS NC ZP 6 3 15356 NUT, 5/16 NE NYLOCK ZP 6 4 18977-00 ASSEMBLY, DRIVELINE/CLUTCH 1-3/8 6 SPLINE (SEE TABLE BELOW) 1 ASSEMBLY DRIVELINE/CLUTCH 1-3/8 6 SPLINE (18977-00) ITEM PART NUMBER DESCRIPTION QTY 5 0883-0120-00 KIT, CROSS AND BEARING W-2400 2 6 12209 SAFETY CHAIN 1 7 18967-00 YOKE, INBOARD S4 1 8 18970-00 YOKE, INBOARD S5 1 9 12220 CONE, 6 RIB SAFTEY 2 10 12223 RING, SC25 BEARING 2 11 14714-00 YOKE, FLANGE 1 12 14744-00 CLUTCH, FRICTION 1 A 14061-00 SPRING, BELVILLE (WSCHIED) 1 B 14062-00 SET, FRICTION DISC 1 C 14720-00 YOKE, FLANGE 1 D 14736-00 PLATE, THRUST 1 E 14737-00 HUB, CLUTCH 1 F 14738-00 BACK-UP RING 1 G 14739-00 BALL, CLUTCH 3 H 14740-00 SPRING, COMPRESSION 1 I 14741-00 COLLAR, LOCK 1 J 14742-00 RING, BACKUP 1 K 14743-00 RING, SNAP 1 L 15647 NUT, M10 X 1.5 HEX NYLOCK TYPE NE 6 M 15747-00 BOLT, M10 X 1.5 X 50 CLASS 8.8 HC 6 13 18968-00 PROFILE, INNER S4LGA 1 14 18969-00 PROFILE, OUTER S5L 1 15 18972-00 TUBE, INNER SHIELD ROUND 1 16 18971-00 TUBE, OUTER SHIELD OVAL 1 17 15575 PIN, M10 X 80 SPRING 2 18 12210 DECAL, OUT 1 19 12211 DECAL, IN 1 Page 27

DRIVELINE, SECONDARY LH DRIVE KITS 07/07 Page 28

07/07 LH DRIVE KITS DRIVELINE, SECONDARY DRIVELINE, HEADER SECONDARY (18978-00) ITEM PART NUMBER DESCRIPTION QTY 1 12196 YOKE, 1-3/8 6 SPLINE 2 2 18976-00 TUBE, INNER SHIELD RND 1 3 18975-00 TUBE, OUTER SHIELD OVAL 1 4 18974-00 PROFILE, OUTER 1 1 5 18973-00 PROFILE, INNER OV 1 6 12210 DECAL, OUT 1 7 0883-0121-00 KIT, CROSS AND BEARING W -2300 2 8 15573 PIN, M10 X 65 SPRING 2 10 12209 CHAIN, SAFETY 1 11 12208 RING, SC15 BEARING 2 12 12205 CONE, 5 RIB SHIELD 2 13 12201 YOKE, INBOARD 1 1 14 12198 YOKE, INBOARD OV 1 15574 SCREW, WS365305 (NOT SHOWN) 2 12211 DECAL, IN (NOT SHOWN) 1 Page 29

FAN HOSE ASSEMBLY 25-30 HEADERS 07/07 Page 30

07/07 25-30 HEADERS FAN HOSE ASSEMBLY FAN HOSE ASSEMBLY (25-30 HEADERS) ITEM PART NUMBER DESCRIPTION QTY 1 12146 ELBOW, RUBBER-8 X 45 DEG. 1 2 15031 WASHER, 3/8 FLAT ZP 4 3 15116 BOLT, 3/8 X 2-1/2 GR5 HHCS ZP 2 4 15351 NUT, 5/16 SERR FLANG NC ZP 4 5 15388 NUT, 3/8 NE NYLOCK ZP 2 6 15416 WASHER, 5/16 SAE FLAT ZP 4 7 16091 T-BOLT, CLAMP 8-3-8 4 8 16092 T-BOLT, CLAMP 8-11/16 4 9 17437 MANIFOLD ELBOW, -8 (MR) 1 10 17777 FLEX HOSE 8 ID X 8FT 1 11 21512 BAND, ELBOW SUPPORT 2 12 15700-00 U-BOLT, 5/16-18 X 8.19 X 6.59 2 13 25837-00 MANIFOLD 15-20FT. HEADER/END 1 14 26171-12 TUBE MOUNT WELDMENT 2 Page 31

FAN HOSE ASSEMBLY 35 HEADERS 07/07 Page 32

07/07 35 HEADERS FAN HOSE ASSEMBLY FAN HOSE ASSEMBLY (35 HEADERS) ITEM PART NUMBER DESCRIPTION QTY 1 12146 ELBOW, RUBBER-8 X 45 DEG. 1 2 15219 BOLT, 5/16 X 1 GR5 HHCS NC ZP 4 3 15250 WASHER, 5/16 FLAT ZP 8 4 15356 NUT, 5/16 NE NYLOCK ZP 4 5 16091 T-BOLT CLAMP 8-3/8 4 6 16092 T-BOLT CLAMP 8-11/16 4 7 17437 MANIFOLD ELBOW -8 (MR) 1 8 17777 FLEX HOSE 8 ID X 8FT 1 9 21512 BAND, ELBOW SUPPORT 2 10 25617-12 HOSE CONNECTOR WELDMENT 1 11 74737-00 HOSE, 8 X 4FT. FLEX 1 12 29127-12 PLATE, EXTENDER 1 Page 33

FAN HOSE ASSEMBLY (RH) 35-40 HEADERS 07/07 Page 34

07/07 35-40 HEADERS FAN HOSE ASSEMBLY (RH) RH FAN HOSE ASSEMBLY (35-40 HEADERS) ITEM PART NUMBER DESCRIPTION QTY 1 12146 ELBOW, RUBBER -8 X 45 DEG. 1 2 15260 WASHER, 3/8 FLAT ZP 18 3 15219 BOLT, 5/16 X 1 GR5 HHCS NC ZP 2 4 15356 NUT, 5/16 NE NYLOCK ZP 2 5 15388 NUT, 3/8 NE NYLOCK ZP 6 6 15250 WASHER, 5/16 SAE FLAT ZP 2 7 16091 T-BOLT CLAMP 8-3/8 2 8 16092 T-BOLT CLAMP 8-11/16 4 9 17437 MANIFOLD ELBOW -8 (MR) 1 22664 FLEX HOSE SUPPORT BAND ASSEMBLY (INCLUDES ITEMS 7, 10 & 11) 1 7 16091 T-BOLT CLAMP 8-3/8 2 10 17777 FLEX HOSE 8 ID X 8FT 1 11 21512 BAND, ELBOW SUPPORT 2 12 15700-00 U-BOLT, 5/16-18 X 8.19 X 6.59 1 13 25837-00 MANIFOLD 15-20FT. HEADER/END 1 14 29159-12 TUBE MOUNT WELDMENT 1 15 29949-12 BRACKET, TUBE MOUNT 1 25908-00 HALF CLAMP ASSEMBLY (INCLUDES ITEMS 16 & 17) 1 16 23501 CLAMP, HALF 1 17 22809 GUIDE, SADDLE 1 29952-00 TUBE MOUNT ASSEMBLY (INCLUDES ITEMS 17 & 18) 1 17 228009 GUIDE, SADDLE 1 18 29951-12 TUBE MOUNT WELDMENT 1 19 15017 BOLT, 1/2 X 4-1/2 GR5 HHCS NC ZP 1 20 15034 WASHER, 1/2 FLAT ZP 2 21 15378 BOLT, CARR 3/8 X 1-1/4 GR5 NC ZP 4 22 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 1 23 15364 BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 2 Page 35

FAN HOSE ASSEMBLY (LH) 40 HEADERS 07/07 Page 36

07/07 40 HEADERS FAN HOSE ASSEMBLY (LH) LH FAN HOSE ASSEMBLY (40 HEADERS) ITEM PART NUMBER DESCRIPTION QTY 2 15260 WASHER, 3/8 FLAT ZP 18 3 15219 BOLT, 5/16 X 1 GR5 HHCS NC ZP 2 4 15356 NUT, 5/16 NE NYLOCK ZP 2 5 15388 NUT, 3/8 NE NYLOCK ZP 6 6 15250 WASHER, 5/16 SAE FLAT ZP 2 7 16091 T-BOLT CLAMP 8-3/8 3 8 16092 T-BOLT CLAMP 8-11/16 4 9 17437 MANIFOLD ELBOW -8 (MR) 2 22664 FLEX HOSE SUPPORT BAND ASSEMBLY (INCLUDES ITEMS 7, 10 & 11) 1 7 16091 T-BOLT CLAMP 8-3/8 2 10 17777 FLEX HOSE 8 ID X 8FT 1 11 21512 BAND, ELBOW SUPPORT 2 12 15700-00 U-BOLT, 5/16-18 X 8.19 X 6.59 1 13 25837-00 MANIFOLD 15-20FT. HEADER/END 2 14 29159-12 TUBE MOUNT WELDMENT 1 15 29949-12 BRACKET, TUBE MOUNT 1 25908-00 HALF CLAMP ASSEMBLY (INCLUDES ITEMS 16 & 17) 1 16 23501 CLAMP, HALF 1 17 22809 GUIDE, SADDLE 1 29952-00 TUBE MOUNT ASSEMBLY (INCLUDES ITEMS 17 & 18) 1 17 228009 GUIDE, SADDLE 1 18 29951-12 TUBE MOUNT WELDMENT 1 19 15017 BOLT, 1/2 X 4-1/2 GR5 HHCS NC ZP 1 20 15034 WASHER, 1/2 FLAT ZP 2 21 15378 BOLT, CARR 3/8 X 1-1/4 GR5 NC ZP 4 22 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 1 23 15364 BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 2 Page 37

REEL ARM MOUNT (LH) 25-30 HEADERS 07/07 Page 38

07/07 25-30 HEADERS REEL ARM MOUNT (LH) REEL ARM MOUNT KIT, 25-30 HEADERS (27982) ITEM PART NUMBER DESCRIPTION QTY 1 15007 BOLT, 3/8 X 1-1/2 GR5 NC ZP 1 2 15016 BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP 1 3 15031 WASHER, 3/8 FLAT ZP 9 4 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 4 5 15092 BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP 1 6 15097 WASHER, 1/2 SAE FLAT ZP 14 7 15173 BOLT, 1/2 X 3-1/4 HCS GR5 ZP 1 8 15364 BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 1 9 15388 NUT, 3/8 NE NYLOCK ZP 9 10 15058 BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP 3 11 16091 T-BOLT, CLAMP 8-3/8 1 12 17446 TUBE, CAP - 8 1 13 17843 ELECTRIC ACTUATOR 1 14 22479 PIVOT CLAMP ASSEMBLY 1 15 21733 BRACE CLAMP 1 16 22809 GUIDE, SADDLE 2 17 23501 HALF CLAMP 1 18 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 5 19 15014 BOLT, 1/2 X 1-1/2 HEX HD GR5 ZP 1 20 25815-12 STRAP, ADJUSTMENT 1 21 25834-12 TUBE, ARM MOUNT (CIH, GLEANER) 2 23 25847-12 LH, REEL MT. WELDMENT (CIH, CWS) 1 25 27956-12 LH, REEL ARM WELDMENT (CAT, CWS) 1 Page 39

REEL ARM MOUNT (RH) 25-30 HEADERS 07/07 Page 40

07/07 25-30 HEADERS REEL ARM MOUNT (RH) REEL ARM MOUNT KIT, 25-30 HEADERS (27982) ITEM PART NUMBER DESCRIPTION QTY 1 15007 BOLT, 3/8 X 1-1/2 GR5 NC ZP 2 2 15016 BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP 1 3 15031 WASHER, 3/8 FLAT ZP 9 4 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 4 5 15092 BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP 1 6 15097 WASHER, 1/2 SAE FLAT ZP 8 7 15173 BOLT, 1/2 X 3-1/4 HCS GR5 ZP 1 8 15364 BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 1 9 15388 NUT, 3/8 NE NYLOCK ZP 8 10 15058 BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP 3 13 17843 ELECTRIC ACTUATOR 1 15 21733 BRACE CLAMP 1 16 22809 GUIDE, SADDLE 2 17 23501 HALF CLAMP 1 18 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 3 19 15014 BOLT, 1/2 X 1-1/2 HEX HD GR5 ZP 1 20 25815-12 STRAP, ADJUSTMENT 1 21 25834-12 TUBE, ARM MOUNT (CIH, GLEANER) 1 22 25836-12 RH, REEL MT. WELDMENT (CIH, CWS) 1 24 27954-12 RH, REEL ARM BRACKET (CAT) 1 Page 41

REEL ARM MOUNT (LH) 35-40 HEADERS 07/07 Page 42

07/07 35-40 HEADERS REEL ARM MOUNT (LH) REEL ARM MOUNT KIT, 35 (29783) - 40 (29970) HEADERS ITEM PART NUMBER DESCRIPTION QTY 1 15116 BOLT, 3/8 X 2-1/2 GR5 HHCS ZP 1 2 15012 BOLT, 1/2 X 1 GR5 HEX CPSCREW ZP 1 3 0103-0792-00 BOLT, 1/2 X 2-1/4 HEX GR5 ZP 1 4 15260 WASHER, 3/8 SAE FLAT ZP 9 5 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 4 6 15092 BOLT, 1/2 X 2-1/2 GR5 HEX CAP ZP 1 7 15097 WASHER, 1/2 SAE FLAT ZP 16 8 15016 BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP 2 9 15388 NUT, 3/8 NE NYLOCK ZP 10 10 15058 BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP 5 11 16091 T-BOLT, CLAMP 8-3/8 1 12 17446 TUBE, CAP - 8 1 13 17843 ELECTRIC ACTUATOR 1 14 22479 PIVOT CLAMP ASSEMBLY 1 15 21733 BRACE CLAMP 1 16 22809 GUIDE, SADDLE 2 17 23501 HALF CLAMP 1 18 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 4 19 25834-12 TUBE, ARM MOUNT (CIH, GLEANER) 1 21 25847-12 LH, REEL MT. WELDMENT (CIH, CWS) 1 22 26063-12 STRAP, ADJUSTMENT 1 23 29782-12 WELDMENT, REEL ARM MOUNT (LEXION) 1 Page 43

REEL ARM MOUNT (RH) 35-40 HEADERS 07/07 Page 44

07/07 35-40 HEADERS REEL ARM MOUNT (RH) REEL ARM MOUNT KIT, 35 (29783) - 40 (29970) HEADERS ITEM PART NUMBER DESCRIPTION QTY 1 15116 BOLT, 3/8 X 2-1/2 GR5 HHCS ZP 1 2 15012 BOLT, 1/2 X 1 GR5 HEX CPSCREW ZP 1 4 15260 WASHER, 3/8 SAE FLAT ZP 9 5 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 4 7 15097 WASHER, 1/2 SAE FLAT ZP 8 8 15016 BOLT, 1/2 X 3-1/2 GR5 HEXHD ZP 2 9 15388 NUT, 3/8 NE NYLOCK ZP 6 10 15058 BOLT, CARR 3/8 X 1-1/2 GR5 NC ZP 2 15 21733 BRACE CLAMP 1 16 22809 GUIDE, SADDLE 2 17 23501 HALF CLAMP 1 18 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 3 19 25834-12 TUBE, ARM MOUNT (CIH, GLEANER) 1 20 25836-12 RH, REEL MT. WELDMENT (CIH, CWS) 1 22 26063-12 STRAP, ADJUSTMENT 1 23 29782-12 WELDMENT, REEL ARM MOUNT (LEXION) 1 Page 45

REEL ARM MOUNT (CENTER) 40 HEADERS 07/07 Page 46

07/07 40 HEADERS REEL ARM MOUNT (CENTER) REEL ARM MOUNT KIT, 40 HEADERS (29970) ITEM PART NUMBER DESCRIPTION QTY 1 16092 T-BOLT CLAMP 8-11/16 2 2 23501 CLAMP, HALF 1 3 25836-12 REEL MOUNT WELDMENT 1 4 15388 NUT, 3/8 NE NYLOCK ZP 4 5 15057 BOLT, CARR 3/8 X 1 GR5 NC ZP 4 6 29961-12 STRAP, CENTER ADJUSTMENT 1 7 29960-12 CENTER SPACER WELDMENT 1 8 25834-12 TUBE, ARM MOUNT 1 9 15364 BOLT, 3/8 X 1-1/4 HEX HD GR5 ZP 2 10 15274 BOLT, 3/8 X 4-1/2 HHCS GR5 NC ZP 1 11 15260 WASHER, 3/8 SAE FLAT ZP 3 12 15097 WASHER, 1/2 SAE FLAT ZP 2 13 15047 NUT, 3/8 CENTERLOCK ZP 1 14 15034 WASHER, 1/2 FLAT ZP 1 15 15016 BOLT, 1/2 X 3-1/2 GR5 HEX HD ZP 6 16 15016 BOLT, 1/2 X 3-1/2 GR5 HEX HD 1 17 15013 BOLT, 1/2 X 1-1/4 GR5 HHCS NC ZP 1 18 0101-0100-00 NUT, 1/2-13 UNC NYLOCK 3 19 29958-12 REEL ARM MOUNT CENTER WELDMENT 1 20 22809 GUIDE, SADDLE 2 Page 47

AIR MANIFOLD 25 HEADERS 07/07 25 CWS MANIFOLD ASSEMBLY (12 SPACING) (25933) ITEM PART NUMBER DESCRIPTION QTY 1 25883-33 MANIFOLD, 25 FT. CWS (12 ) 1 2 14077-00 DECAL, CWS LOGO (YELLOW) 1 Page 48

07/07 30-40 HEADERS AIR MANIFOLD 30-40 CWS MANIFOLD ASSEMBLY (12 SPACING) ITEM PART NUMBER DESCRIPTION 1 27490-33 WELDMENT, 30 FT. CWS RH/LH MANIFOLD (12 ) 1 30 FT. (27500) QTY 27216-33 WELDMENT, 35 FT. CWS RH/LH MANIFOLD (12 ) 1 35 FT. (27247) QTY 29963-33 WELDMENT, 40 FT. CWS RH/LH MANIFOLD (12 ) 1 27496-00 ASSEMBLY, 30 FT. CWS CENTER MANIFOLD (12 ) (INCLUDES ITEMS 2-6) 1 2 27491-33 WELDMENT, 30 FT. CWS CENTER MANIFOLD (12 ) 1 3 14077-00 DECAL, CWS LOGO (YELLOW) 1 4 27214-00 PLATE, CONNECTOR/BAFFLE 1 5 15007 BOLT, 3/8 X 1-1/2 GR5 HCS ZP 1 6 15388 NUT, 3/8 NE NYLOCK ZP 1 27219-00 ASSEMBLY, 35 FT. CWS CENTER MANIFOLD (12 ) (INCLUDES ITEMS 2-6) 1 2 27217-33 WELDMENT, 35 FT. CWS CENTER MANIFOLD (12 ) 1 3 14077-00 DECAL, CWS LOGO (YELLOW) 1 4 27214-00 PLATE, CONNECTOR/BAFFLE 1 5 15007 BOLT, 3/8 X 1-1/2 GR5 HCS ZP 1 6 15388 NUT, 3/8 NE NYLOCK ZP 1 29966-00 ASSEMBLY, 40 FT. CWS CENTER MANIFOLD (12 ) (INCLUDES ITEMS 2-6) 1 40 FT. (29967) QTY 2 29965-33 WELDMENT, 40 FT. CWS CENTER MANIFOLD (12 ) 1 3 14077-00 DECAL, CWS LOGO (YELLOW) 1 4 27214-00 PLATE, CONNECTOR/BAFFLE 1 5 15007 BOLT, 3/8 X 1-1/2 GR5 HCS ZP 1 6 15388 NUT, 3/8 NE NYLOCK ZP 1 Page 49

DROP TUBE KIT ALL MODELS 07/07 DROP TUBE KIT ITEM PART NUMBER DESCRIPTION LONG (25920) QTY 1 15351 NUT, 5/16 SERRATED FLANGE NC ZP 2 2 2 15416 WASHER, 5/16 SAE FLAT ZP 2 2 3 15700-00 U-BOLT, 5/16-18 X 8.19 X 6.59 1 1 4 25831-00 WELDMENT, SHORT AIR TUBE 1 25832-00 WELDMENT, LONG AIR TUBE 1 SHORT (25919) QTY Page 50

07/07 ALL MODELS SWITCH/MOUNT PLATE SWITCH/MOUNT PLATE ASSEMBLY (24333) ITEM PART NUMBER DESCRIPTION QTY 1 12167 DECAL, ACTUATOR SWITCH 1 2 13901 SWITCH, ELECTRIC 3P COL 2 3 17849 ELECTRIC SWTICH ASSEMBLY - SPLIT 6 AMP 1 4 17850 ELECTRIC SWITCH ASSEMBLY - SPLIT 15 AMP 1 5 24332-12 PLATE, SWITCH MOUNT 1 Page 51

237 12TH ST. NW P.O. BOX 849 WEST FARGO, ND 58078-0849 (701) 282-5520 (701) 282-9522 www.crary.com Manufactured in the United States of America by Crary Industries