Planning Manual Ultra Performance Plus-Technology combines face tanning units with UV-B optimized Spaghetti lamps. This ensures maximum, standardized tanning intensity as well as producing a tanning effect that stays with you far longer than normal. The extra wide acrylic base and the automatic body cooling ensure a relaxed tanning session. The clearly arranged cockpit with self explanatory symbols allows for simple operation. The standard neck tanning reflector and the optionally available shoulder tanner ensure a seamless tan. AQUA SYSTEM & AROMA offer additional refreshment. The 3D sound system with subwoofer, MP3 dock and SD card slot promises a first-class sound experience. Affinity is available in the "Luminate Silver" colour design. The Mood Lights and Ambient Lights with modifiable colour are available in the following colours: Blue, Red, Magenta, Yellow. EN 60335-2-27:2003+A1:2009 Twin Power Contents Device description........................... 2 Technical data............................... 3 Dimensions................................. 4 Equipment cooling........................... 5 Surround cooling............................ 5 Air conditioner.............................. 5 AQUA / AROMA SYSTEM...................... 5 Note: For further equipment features and planning data for the Affinity sunbeds, please see the Affinity series chapter. 1
Planning Manual Device description 1. Face tanner (UV high pressure lamps + 2 ) 2. 3., base 4. 5. Acrylic glass panel, base 6. Infrared interface 7. Air nozzles body cooling, feet end 8., side part 9., canopy 10. Nozzles AQUA / AROMA SYSTEM 11. Air nozzles body cooling 12. Control panel 13. Adjustable air nozzles face cooling / AROMA 14. Interior lighting 15. Accent lighting canopy 16. Accent lighting front panel 17. 18. Equipment versions (optional) 19. Shoulder tanner 20. Shoulder tanner with 3D sound unit Loudspeaker (22), headphone connection (23), MP3-dock-in (24) 21. 3D sound unit Loudspeaker (22), headphone connection (23), MP3-dock-in (24) 2
Planning Manual Technical data Electrical data Nominal power consumption: without air conditioning 10800 W Nominal voltage: 400 415 V 3N~ Nominal frequency: 50 Hz Rated fusing: 3 x 25 A (time delay) Mains supply line (for example): H05VV-F 5G 4 mm² or Nominal voltage: 230 240 V ~3 Nominal frequency: 50 Hz Rated fusing: 3 x 50 A (time delay) Mains supply line (for example): H05VV-F 4G 10 mm² Performance: Canopy: 20 x 160 W 2 x 8 W UV high pressure lamps 2 x 520 W 1) Lower part: 18 x 100 W Side part: 8 x 160 W UV high pressure lamps 1 x 520 W 1) Noise emission Acoustic pressure level: 68.9 db (A) Inlet and exhaust air Temperature difference, supply/exhaust air: 11 C Max. air requirement: 2800 m 3 /h Opt. ambient temperature: 25-30 C Max. ambient temperature: 15-40 C Max. inlet air temperature: 40 C Exhaust cross section w/o exhaust system: 588 cm² Cabin inlet air cross section: 5200 cm² Exhaust cross section with exhaust system: 710 cm² Warm air return: possible 1) The UV high pressure lamps used are broadband radiators that can be operated with different wattages (approx. 240-520 W). 3
Planning Manual Dimensions B+ 1420 mm B 1370 mm B - 1335 mm B1 800 mm B2 188 mm L* 2350 mm L 2260 mm L1 2000 mm L2 1730 mm L3 238 mm L4 265 mm L5 867 mm L6 (L7) 1116 mm H 1340 mm H1 1740 mm H2 1078 mm H4 400 mm H5 114 mm H6 1887 mm H7 1974 mm H8 2197 mm H9 2342 mm X 1135 mm Y 472 mm Z 2260 mm 300 mm BK 2400 mm TK 2300 mm 08613 / 1 4
Planning Manual Equipment cooling Cabin or studio air is drawn in beneath the front panel (1) of the lower part of the sunbed and over the filter mats in the canopy (2) (inlet air) in order to cool the equipment. The inlet air is first cleaned in a filter, then fed past the hot UV low pressure and high pressure lamps and finally expelled as warm exhaust air via the central exhaust air bracket (3) at the rear of the sunbed. Surround cooling 08614 / 2 Surround air ventilation for the user is provided automatically. The intensity is adjustable in 9 steps. Cabin or studio air is drawn in and used for cooling. The air is fed through several nozzles over the whole length in the middle of the canopy. In the head area there are two air nozzles that can be switched on separately. Air is also sucked in through the louvres in the base front panel, from where it is conducted to two foot nozzles at the same height as the acrylic base to enable cooling air to flow around the body. The user can have a pleasant cooling mist (AQUA SYSTEM) sprayed from the outer nozzles in the body area. Air conditioner An air conditioning system is not available with this device. AQUA / AROMA SYSTEM Standard equipment: Aroma and body cooling for the user. 5