TOOLS HEAVY DUTY CRIMPING TOOL LENGTH 9 1/2 ECONOMY TYPE CRIMPING TOOL LENGTH 7 1/2 CABLE TIE INSTALLATION TOOL 0014004534 All electrical terminals, including Perma-seal and funnel entry nylon, are available in convenient assortments. Please ask your Sales Specialist for information about our assortment program. ELECTRICAL WIRE AND FITTINGS MANUFACTU IN THE U.S.A. by E.T.C. MOLEX NO OF THIS DOCUMENT MAY BE PHOTOCOPIED, REPRODUCED, OR ARROW INDUSTRIAL SUPPLY, INC. THE FUNNEL ENTRY NYLON DOUBLE CRIMP WIRE TERMINALS 0014004530 0014004532 RING TERMINALS 22-18 WIRE RANGE 6-8 12-14 16-14 WIRE RANGE 6-8 12-14 5/16-3/8 0014004540 0014004550 0014004560 0014004570 0014004590 0014004600 0014004610 0014004620 0014004640 12-10 WIRE RANGE 6-8 12-14 1/4-5/16 5/16-3/8 7/16-1/2 0014004649 0014004650 0014004660 0014004670 0014004680 0014004690 0014004700 HEAVY DUTY 12-10 WIRE RANGE 6-8 3/16-14 1/4-5/16 5/16-3/8 7/16-1/2 0014004710 0014004720 0014004730 0014004740 0014004750 0014004760 SPADE WIRE TERMINALS 22-18 WIRE RANGE 6-8 0014004770 0014004775 0014004780 16-14 WIRE RANGE 6-8 0014004790 0014004800 0014004810 12-10 WIRE RANGE 199 0014004820 0014004830 Our nylon color-coded barrel style terminals offer the ultimate in high-performance terminal design and construction. The tin-plated brass sleeve strengthens the barrel and secures the wire to protect against stress and high vibration. A permanently attached colorcoded nylon insulating sleeve extends beyond the metal support sleeve. A funnel ferrule wire entrance into electrical barrel eliminates wire strand "hang-up," increases crimping rates and wire termination reliability. Operating temperature range: continuous duty from -67ºF to 221 F (-55 C to 105C) BLOCK WIRE TERMINALS 22-18 WIRE RANGE 6-8 0014004840 0014004840-1 0014004850 16-14 WIRE RANGE 6-8 0014004860 0014004860-1 0014004870 12-10 WIRE RANGE 6-8 0014004880 0014004880-1 0014004890 FLANGED SPADE TERMINALS 0014004831 0014004832 0014004833 0014004834 Section 14 Page 1 HOOK TONGUE TERMINALS 22-18 WIRE RANGE BUTT CONNECTOR 22-18 WIRE RANGE 0014004950 16-14 WIRE RANGE 014004960 12-10 WIRE RANGE 0014004970 HEAVY DUTY BUTT CONNECTOR 0014004900 0014004910 16-14 WIRE RANGE 0014004920 0014004930 12-10 WIRE RANGE 0014004940 0014004980 0014004835 0014004836
Section 14 Page 2 ELECTRICAL WIRE AND FITTINGS MANUFACTU IN THE U.S.A. by E.T.C. MOLEX NO OF THIS DOCUMENT MAY BE PHOTOCOPIED, REPRODUCED, OR ARROW INDUSTRIAL SUPPLY, INC. THE 3 WAY BUTT CONNECTOR 53-16-3 53-14-3 53-10-3 COLOR 4 WAY BUTT CONNECTOR 54-16-4 54-14-4 54-10-4 COLOR MALE QUICK DISCONNECT 22-18 GAUGE TAB.250 X.032 0014005100 16-14 GAUGE TAB.250 X.032 0014005110 12-10 GAUGE TAB.250 X.032 0014005120 FUNNEL ENTRY NYLON DOUBLE CRIMP WIRE TERMINALS 0014004990 0014005000 0014005010 0014005020 0014005030 0014005040 FEMALE QUICK DISCONNECT 22-18 GAUGE TAB.110 X.020.250 X.032 0014005045 0014005050 16-14 GAUGE TAB.110 X.020 0014005052.187 0014005059.250 X.032 0014005060 12-10 GAUGE TAB MALE COUPLER FULLY INSULATED 22-18 GAUGE TAB.187 X.032 0014005150 16-14 GAUGE TAB.250 X.032 0014005170 12-10 GAUGE TAB.250 X.032 0014005190 MALE BULLET SNAP PLUG 22-18 GAUGE DIA.156.180 0014005220 0014005230 16-14 GAUGE DIA.156 200 0014005240 FEMALE COUPLER FULLY INSULATED 22-18 GAUGE TAB.200 X.032 0014005160 16-14 GAUGE TAB.250 X.032 0014005180 12-10 GAUGE TAB.250 X.032 0014005200 FEMALE BULLET SNAP RECEPTACLE DIA.156.180 22-18 GAGE 0014005250 0014005260 16-14 GAUGE DIA.156 0014005270 KNIFE DISCONNECT 22-18 GAUGE 0014005290 16-14 GAUGE 0014005300 12-10 GAUGE 0014005310 90 FLAG 22-18 GAUGE 0014005205 16-14 GAUGE 0014005210 The funnel entry double crimp nylon terminals are the most economical terminal ever made for all types of maintenance. When they are installed correctly you never have to worry about exposed wires..250 X.032 0014005070
201 SECTION 14 PAGE 3 NO OF THIS DOCUMENT MAY Wire Terminals Perma-Seal - All-weather, heat-sealable NYLON. Ring Tongue Terminals Spade Tongue Terminals Stud Size Gauge Color 12-10 Yellow 0014000399 6-8 12-10 Yellow 0014003100 12-10 Yellow 0014003110 10-1/4 12-10 Yellow 0014003120 1/4-5/16 12-10 Yellow 0014003130 5/16-3/8 12-10 Yellow 0014003140 7/16-1/2 12-10 Yellow 0014003150 16-14 Blue 0014003040 6-8 16-14 Blue 0014003050 16-14 Blue 0014003060 12-1/4 16-14 Blue 0014003070 1/4-5/16 16-14 Blue 0014003080 5/16-3/8 16-14 Blue 0014003090 22-18 Red 0014003000 6-8 22-18 Red 0014003010 22-18 Red 0014003020 12-1/4 22-18 Red 0014003030 Female Slip-on Coupler - Insulated Gauge Color 12-10 Yellow 0014003300 16-14 Blue 0014003290 22-18 Red 0014003280 Male Slip-on Coupler - Insulated Gauge Color 12-10 Yellow 0014003330 16-14 Blue 0014003320 22-18 Red 0014003310 Female - Quick Disconnect Gauge Color 12-10 Yellow 0014003355 16-14 Blue 0014003350 22-18 Red 0014003340 Stud Size Gauge Color 12-10 Yellow 0014003220 6-8 12-10 Yellow 0014003230 12-10 Yellow 0014003232 10-1/4 12-10 Yellow 0014003235 16-14 Blue 0014003190 6-8 16-14 Blue 0014003200 16-14 Blue 0014003210 22-18 Red 0014003160 6-8 22-18 Red 0014003170 22-18 Red 0014003180 Butt Connectors Gauge Color 12-10 Yellow 0014003260 16-14 Blue 0014003250 22-18 Red 0014003240 26-22 White 0014003239 Step Down Butt Connectors Gauge Color 10-12 to 8 Pink 0014031004 16-14 to 12-10 Yellow 0014031002 18-22 to 16-14 Blue 0014031000 22-24 to 22-18 Red 0014031005 Hook Tongue Terminal Gauge Color 16-14 Blue 0014003270 Male Bullet Plugs Gauge Color 16-14 Blue 0014003410 18-22 Red 0014003411
Section 14 Page 4 202 ELECTRICAL WIRE AND FITTINGS MANUFACTU IN THE U.S.A. by E.T.C. MOLEX NO OF THIS DOCUMENT MAY BE PHOTOCOPIED, REPRODUCED, OR ARROW INDUSTRIAL SUPPLY, INC. THE ELEKTRALINK THE SEALED SOLDER CONNECTION RING TERMINAL 22-18 WIRE RANGE 6 0014005312 8 0014005314 10 0014005316 1/4 0014005318 16-14 WIRE RANGE 8 0014005320 10 0014005322 1/4 0014005324 3/8 0014005326 12-10 WIRE RANGE 10 0014005328 1/4 0014005330 3/8 0014005332 1/2 0014005334 SPADE TERMINAL 22-18 WIRE RANGE 10 0014005336 16-14 WIRE RANGE 10 0014005338 12-10 WIRE RANGE 10 0014005340 BUTT CONNECTOR CLEAR 24-20 WIRE RANGE 0014005342 22-18 WIRE RANGE 0014005344 16-14 WIRE RANGE 0014005346 12-10 WIRE RANGE 0014005348 IDEAL WIRE NUTS BLACK/ GRAY 22-16 WIRE RANGE 0014005420 ORANGE 18-16 WIRE RANGE 0014005430 18-14 WIRE RANGE 0014005440 1 WIRE RANGE 0014005450 SMALL 22-18 WIRE RANGE 0014005460 WING TYPE WIRE NUTS 22-10 WIRE RANGE 0014005461 18-8 WIRE RANGE 0014005462 GRAY 18-8 WIRE RANGE 0014005463 1 WIRE RANGE 0014005464 PIGTAIL CONNECTOR 24-14 WIRE RANGE 0014005400 1 WIRE RANGE 0014005410 SCOTCHLOCK 22-18 WIRE RANGE 0014005490 16-14 WIRE RANGE 0014005480 12-10 WIRE RANGE 0014005470 Elektralink terminals provide an easy, reliable, and moisture resistant way to complete sealed in-line wire splices. In a one-step operation, each connection solders, insulates, encapsulates and relieves wire strain for wires from 24 AWG to 10 AWG. When the sleeve is heated it shrinks and the solder melts and flows, resulting in a perfectly sealed solder connection. Patent Number 4,883,925. AVAILABLE IN ASSORTMENTS DESIGNED TO SAVE TIME AND SPACE.
SECTION 14 PAGE 5 NO OF THIS DOCUMENT MAY GPT General Primary Wire Electrical wire Primary Wire, Cross-Linked Wire, Speaker & Trailer Wire SPECIAL PVC INSULATION OVER STRANDED COPPER CONDUCTORS RECOMMENDED FOR TRUCKS, TRACTORS, CARS AND GENERAL SERVICE SOLD IN 100 ROLLS -40F TO 176F Gauge Brown Black Green White Red Blue Yellow Orange SXL Cross-Linked Wire Polyethylene CROSS-LINKED INSULATION OVER STRANDED COPPER CONDUCTORS DESIGNED FOR HARSH ENVIRONMENTS SOLD IN 100 ROLLS -60F TO +257F Gauge Black Brown Red White Green Orange Blue Speaker Wire CLEAR COPPER WIRE Gauge 30 100 1000 18 0014000060 0014000061 0014000063 Trailer Wire 203 18 0014000009 0014000010 0014000011 0014000012 0014000013 0014000014 0014000015 0014000015-1 16 0014000027 0014000020 0014000021 0014000022 0014000023 0014000024 0014000025 0014000026 14 0014000036 0014000030 0014000031 0014000032 0014000033 0014000034 0014000035-12 0014000046 0014000040 0014000041 0014000042 0014000043 0014000044 0014000045 0014000047 10-0014000050 0014000051 0014000052 0014000053 0014000054 0014000055-18 0014231200-100 0014231201-100 0014231202-100 0014231209-100 0014231205-100 0014231203-100 0014231206-100 16 0014231300-100 0014231301-100 0014231302-100 0014231309-100 0014231305-100 0014231303-100 0014231306-100 14 0014231400-100 0014231401-100 0014231402-100 0014231409-100 0014231405-100 0014231403-100 0014231406-100 12 0014231500-100 0014231501-100 0014231502-100 0014231509-100 0014231505-100 0014231503-100 0014231506-100 10 0014231600-100 0014231601-100 0014231602-100 0014231609-100 0014231605-100 0014231603-100 0014231606-100 60V -67F TO 176F Gauge Conductors Colors Length 16 4 Black, Red, Brown, White 100 0024011398 16 6 Green, Black, Red, Brown, White 100 0024011400 14 4 Black, Red, Brown, White 100 0024011402 14 6 Green, Black, Red, Brown, White 100 0024011403 14 4 White, Brown, Yellow, Green 100 00140928 Corrosion Resistant Wire - (Boat Cable) TINNED WIRE WITH FLAT PVC JACKET UL AND COAST GUARD APPROVED UP TO 600 VOLTS 221F IN DRY CONDITIONS, 167F IN WET CONDITIONS 100 Wire Size AWG 2 Conductor Black/ White 3 Conductor Black/ White/ Green 14 001414-2BC 001414-3BC 12 001412-2BC 001412-3BC 10 111410-2BC -
SECTION 14 PAGE 6 NO OF THIS DOCUMENT MAY Parallel Bonded 204 Electrical wire DESIGNED FOR RVS, BOAT AND UTILITY TRAILERS EASILY SEPARATED CONDUCTORE ARE USER FRIENDLY FOR USE FOR 50 VOLTS OR LESS PVC INSULATION IS ABRASION-RESISTANT AND PROTECTS AGAINST MOISTURE, OIL, ACID AND SALT INSULATED RATED +176F (+80C) MEETS OR EXCEEDS SAE J1128 FINE STRANEDED COPPER CONDUCTOR FOR MAXIMUM CONDUCTIVITY AND FLEXIBILITY Gauge Conductors Colors 16/2 2 Black/Red 0014232001 14/2 2 Black/Red 0014232002 16/3 3 Brown/Green/Yellow 0014232101 14/3 3 Brown/Green/Yellow 0014232102 18/4 4 Brown/Green/White/Yellow 0014232200 16/4 4 Brown/Green/White/Yellow 0014232201 14/4 4 Brown/Green/White/Yellow 0014232202 Trailer Cable - Multi-Conductor TRUCK, BUS, FARM CONSTRUCTION, AND COMMERCIAL APPLICATIONS FOR USE FOR 60 VOLTS OR LESS FINE STRANDED COPPER CONDUCTOR, TINNED, FOR MAXIMUM CONDUCTIVITY, FLEXIBILITY AND CORROSION RESISTANCE PVC INSULATION IS ABRASION-RESISTANT AND PROTECTS AGAINST MOISTURE, OIL, ACID AND SALT MEETS OR EXCEEDS SAE J1128 AND ATA SPECIFCATIONS FLEXIBLE FOR EASY ROUTING, RATED -67F TO -176F (-55C TO 80C) COLOR-CODED CONDUCTORS FOR EASY CIRCUIT IDENTIFICATION JUNCTION BLCOK AVAILABLE Gauge/ Conductors Colors 16/4 White/Black/Brown/Red 0014234101 14/4 White/Black/Brown/Red 0014234102 16/6 Green/White/Black/Red/Yellow/Brown 0014234201 14/6 Green/White/Black/Red/Yellow/Brown 0014234202 14/7 Green/White/Black/Red/Yellow/Brown/Blue 0014243201 14/7, 12/1 (white) Green/White/Black/Red/Yellow/Brown/Blue 0014243202 14/4, 12/1 (blue) Green/White/Black/Red/Yellow/Brown/Blue 0014243203 10/2, (white, black) 12/6, 10/1 (white) Green/White/Black/Red/Yellow/Brown/Blue 0014243204 12/4, 10/2, 8/1* Green/White/Black/Red/Yellow/Brown/Blue* 0014234401* * 7 CONDUCTOR ABS GREEN JACKET A.T.A. RECOMMENDED CIRCUIT COLOR CODING WHITE GROUND RETURN TOWING VEHICLE STOP LAMP AND ANTI-WHEEL LOCK DEVICE BLACK ICC REQUI MARKER AND CLEARANCE LAMPS GREEN RIGHT-HAND DIRECTIONAL SIGNAL AND HAZARD LAMP LEFT-HAND DIRECTIONAL SIGNAL AND HAZARD LAMP AUXILIARY CIRCUITS BROWN TAIL LAMP, THREE-BAR MARKER LAMPS AND CLEARANCE OR MARKER LAMPS OTHER THAN ICC REQUI LICENSE LAMPS
SECTION 14 PAGE 7 NO OF THIS DOCUMENT MAY 205 Terminals & Connectors 3M TM Scotchlock TM T-Tap Nylon Insulated Self-Stripping Female Quickslide Disconnect 3M# Wire Range Color Operating Temp 951K 22-18 Red 221 O F (105 O C) 001430572 952K 18-14 Blue 221 O F (105 O C) 001431572 953K 12 Yellow 221 O F (105 O C) 001432572 Scotchlock TM IDC Connectors for Electrical Applications USE FOR QUICK CONNECTIONS WITH NO WIRE STRIPPING 3M# Wire Range Color Operating Temp 558 22-18 Red 194 O F (90 O C) 0014005490 905 22-18 to 18-14 Red 194 O F (90 O C) 001430562 801 18-14 Blue 194 O F (90 O C) 0014005480 564 18-14 White 194 O F (90 O C) 001431574 902 18-14 to 12-10 Brown 194 O F (90 O C) 0014005491 903 12-10 Yellow 194 O F (90 O C) 0014005470 3M TM Scotchlock TM 804 IDC, Run and Tap, Moisture Resistant 3M# Wire Range Color Operating Temp 804 18-14 Blue 167 O F (75 O C) 001431762 3M TM Scotchlock TM Insulated Displacement Connector 3M# Wire Range Color Operating Temp UR 26-19 Red 285 O F (140 O C) 001437044 UV 26-22 Yellow 285 O F (140 O C) 001437045 314U 22-14 Blue 221 O F (105 O C) 001437040 314 22-14 Blue 221 O F (105 O C) 001437041 3M TM E-9Y Crimper Tool SIDE WIRE CUTTER STEPPED JAWS AND LONG NOSE PROVIDE A NEAR PARALLEL ACTION AT THE MOMENT OF CONNECTION USE WITH UR AND UY DIPLACEMENT CONNECTORS ISULATED HANDLES NO. 0014429
SECTION 14 PAGE 8 NO OF THIS DOCUMENT MAY 206 Battery Cable & Welding Cable Battery Cable PVC INSULATION RESISTS ABRASION, FUEL, OIL, ACID AND SALT INSULATION IS FLAME-RETARDANT RATED 60V Gauge Length Black Red 8 10 0014200101-10 0014200201-10 8 25 0014200101-25 0014200201-25 6 10 0014200102-10 0014200202-10 6 25 0014200102-25 0014200202-25 4 10 0014200103-10 0014200203-10 4 25 0014200103-25 0014200203-25 2 10 0014200104-10 0014200204-10 2 25 0014200104-25 0014200204-25 1 10 0014200105-10 0014200205-10 1 25 0014200105-25 0014200205-25 1/0 10 0014200106-10 0014200206-10 1/0 25 0014200106-25 0014200206-25 2/0 10 0014200107-10 0014200207-10 2/0 25 0014200107-25 0014200207-25 3/0 10 001420010 001420020 3/0 25 0014200108-25 0014200208-25 4/0 10 0014200109-10 0014200209-10 4/0 25 0014200109-25 0014200209-25 Welding Cable ABRASION, SALT AND CHEMICAL-RESISTANT INSULATION RATED 600V FINE-STRANDED COPPER CONDUCTOR FOR MAXIMUM CONDUCTIVITY/FLEXIBILITY Gauge Length Black Red 6 10 0014202102-10 0014202202-10 6 25 0014202102-25 0014202202-25 4 10 0014202103-10 0014202203-10 4 25 0014202103-25 0014202203-25 2 10 0014202104-10 0014202204-10 2 25 0014202104-25 0014202204-25 1 10 0014202105-10 0014202205-10 1 25 0014202105-25 0014202205-25 1/0 10 0014202106-10 0014202206-10 1/0 25 0014202106-25 0014202206-25 2/0 10 0014202107-10 0014202207-10 2/0 25 0014202107-25 0014202207-25 3/0 10 001420210 001420220 3/0 25 0014202108-25 0014202208-25 4/0 10 0014202109-10 0014202209-10 4/0 25 0014202109-25 0014202209-25 250MCM 10 0014202110-10 - 250MCM 25 0014202110-25 - Cable Stripper NO. QuickStrip Battery Cable Stripper - 10-4/0 ga. 00144215 Replacement Blade for Above 00144216 QuickStrip PRO Battery Cable Stripper - 10-250MCM 00144217 Replacement Blade for Above 00144218 Standard Cutter/Crimper Tool CUTS AND STRIPS WIRE 22-10 GAUGE CRIMPS INSULATED & NON-INSULATED CONNECTORS CUTS 4-40, 6-32, 10-24, 10-32 BOLTS NO. Standard Cutter/Crimper Tool 0014420193 QuickCutter TM 1 MADE OF FORGED STEEL WITH INSULATED GRIPS. CUTS CABLE UP TO 2/0 GAUGE. NO. QuickCutter 1 00144275
SECTION 14 PAGE 9 NO OF THIS DOCUMENT MAY 207 Booster Cables Medium - Box Gauge Length Clamp Amps Clamp Style Part No. 4 16 500 Parrot 0014602224 4 20 500 Parrot 0014602226 Heavy Duty - Pail Gauge Length Clamp Amps Clamp Style Part No. 1/0 20 900 Parrot 0014602370 2/0 25 900 Parrot 0014602400 2/0 20 900 Parrot 0014602390 Booster Clamps PACKAGED IN PAIRS Clamp Amps Clamp Style Part No. 200 Alligator 0014602045 400 Mechanic 0014602050 500 Mechanic 0014602060 500 Coated Parrot 0014602065 500 Parrot 0014602055 Coated Parrot Mechanic Parrot Alligator Crimp Tool - Hammer Type CRIMPS 16 GA. THROUGH 4/0 NON-INSULATED TERMINAL, LUGS & SPLICES. TAKES THE PLACE OFUP TO 3 DIFFERENT TOOLS. ONE NEST AND INDENTOR ELIMINTATE CHANGING TOOLING. EXTREAMLY COMPACT - 4 TALL STRIKE RAM WITH HAMMER FOR PERFECT CONNECTIONS. CRIMPING SCALE ON TOOL PREVENTS UNDER-CRIMPING NEST DESIGN PREVENTS OVER-CRIMPING IDEAL FOR GARAGES, FLEETS, EQUIPMENT, WELDING, ETC. NO. 0014004533
SECTION 14 PAGE 10 NO OF THIS DOCUMENT MAY 208 Crimpable Battery Terminals Straight Clamp Gauge Positive Negative 4 0014004004P 0014004004N 2 0014004002P 0014004002N 1 0014004001P 0014004001N 1/0 0014004010P 0014004010N 2/0 0014004020P 0014004020N 3/0 0014004030P 0014004030N 4/0 0014004040P 0014004040N Military Style Connectors LOW PROFILE DESIGN MEASURES ONLY 3/4 HIGH LONG BOLT PERMITS ADDITIONAL POWER CONNECTIONS POLARITY SPECIFIC LEAD CONSTRUCTION, ZINC PLATED STEEL FASTENERS INCLUDED COMPLIES WITH MILITARY SPEC, POSITIVE #A52425-1 AND NEGATIVE A52425-2 Positive 00145350P Negative 0014539N Left Elbow/Right Elbow Gauge Positive Left Negative left Positive Right Negative Right 4 0014004204P 0014004204N 0014004104P 0014004104N 2 0014004202P 0014004202N 0014004102P 0014004102N 1 0014004201P 0014004201N 0014004101P 0014004101N 1/0 0014004210P 0014004210N 0014004110P 0014004110N 2/0 0014004220P 0014004220N 0014004120P 0014004120N 3/0 0014004230P 0014004230N 0014004130P 0014004130N 4/0 0014004240P 0014004240N 0014004140P 0014004140N Flag Connector - Heavy Duty Top Post Terminals Gauge Positive Negative 2 0014004302P 0014004302N 1 0014004301P 0014004301N 1/0 0014004310P 0014004310N 2/0 0014004320P 0014004320N 3/0 0014004330P 0014004330N 4/0 0014004340P 0014004340N Heavy Duty Top Post Terminals Description Size Polarity Lead Clamp 6 to 2/0 Universal 00145588U Lead Clamp 1 to 4/0 Universal 00145566U
SECTION 14 PAGE 11 NO OF THIS DOCUMENT MAY 209 Crimpable Battery Terminals Heavy Wall Copper Lug Gauge 5/16 (8mm) 3/8 (10mm) 1/2 (13mm) 8 00144808E 00144808F 00144808H 6 00144806E 00144806F 00144806H 4 00144804E 00144804F 00144804H 2-00144802F 00144802H 1-00144801F 00144801H 1/0-00144810F 00144810H 2/0-00144820F 00144820H 3/0-00144830F 00144830H 4/0-00144840F 00144840H 250MCM - 00144860F 00144860H HEAVY WALL CAST COPPER ALLOY LUG STONGER THAN STANDARD COPPER TUBE LUGS RAISED PAD PREVENTS SHIRTS TIN-PLATED FOR ADDED CONDUCTIVITY AND CORROSION RESISTANCE Crimpable Side Terminal Conductor Gauge 4 0014100653 1 0014100655 Stud Terminal - Stackable & Lockable Gauge 3/8 (10mm) 1/2 (13mm) 6 00144906F - 4 00144904F - 2 00144902F 00144902H 1 00144901F 00144901H 1/0 00144910F 00144910H 2/0 00144920F 00144920H 3/0 00144930F 00144930H 4/0 00144940F 00144940H Retro Fit Terminal REPLACEMENT TERMINAL FOR THREADED OR SIDE TERMINAL BATTERIES USE WITH CLOSED CAP NUTS FOR BATTERY APPLICATIONS OR 3/8 FLANGE BOLT FOR SIDE TERMINAL BATTERIES Gauge 3/8 (10mm) 1/0 0014102560 2/0 0014102570 3/0 0014102580 USE WITH BATTERIES, ENABLES MULTIPLE BATTERY HOOK UP STACKABLE, 24 POSITION ANTI-ROTATION TEETH BITE IN TO LEAD FOR POSITIVE HOLD CONNECTORS OF DIFFERENT CABLE GAUGE CAN BE MIXED FOR MAXIMUM APPLICATION AND LAYOUT FLEXIBILITY BATTERY APPLICATIONS REQUIRE USE OF 3/8-16 COLSED CAP NUT Stud Flag Locking Gauge 1/0 00144510F 2/0 00144520F 3/0 00144530F Retro Fit Duel Cable Gauge 3/8 (10mm) 1/0 0014102660 2/0 0014102670 3/0 0014102680
SECTION 14 PAGE 12 Rings Wire Size Stud Size 22-18 6 10020HT 22-18 8 10030HT 22-18 10 10040HT 22-18 1/4 10041HT 22-18 5/16 10042HT 22-18 3/8 10043HT 16-14 6 10086HT 16-14 8 10090HT 16-14 10 10100HT 16-14 1/4 Slim 1O114HT 16-14 1/4 10101HT 16-14 5/16 10102HT 16-14 3/8 10103HT 12-10 6 10210HT 12-10 8 10220HT 12-10 10 10230HT 12-10 1/4 Slim 10245HT 12-10 1/4 10240HT 12-10 5/16 10250HT 12-10 3/8 10260HT v 10 10610HT 8 1/4 10613HT 6 10 10615HT 6 1/4 10616HT 6 3/8 10618HT 4 3/8 10622HT Butt Connectors Wire Size NO OF THIS DOCUMENT MAY 22-18 10080HT 16-14 10170HT 16-14 10170EHT 12-10 10310HT Quick Connects 210 High Temperature Terminals Non-Insulated Terminals made of steel. Nickel plated for tempuratures up to 900 0 F Wire Size Stud Size 22-18.250 Female 10176HT 22-18.250 Male 10177HT 16-14.250 Female 10180HT 16-14.250 Male 10181HT 12-10.250 Female 10187HT 12-10.250 Male 10186HT Spades Wire Size Stud Size 22-18 6 10050HT 22-18 8 10060HT 22-18 10 10070HT 16-14 6 10149HT 16-14 8 10150HT 16-14 10 10160HT 12-10 6 10270HT 12-10 8 10280HT 12-10 10 10190HT Block Spade Wire Size Stud Size 12-10 10 10292HT Flags Wire Size Stud Size 16-14.250 Female 10189HT Bullet Connectors Wire Size Stud Size 16-14.157 Male 10184HT
SECTION 14 PAGE 13 NO OF THIS DOCUMENT MAY 211 Battery Lugs Tin-Plated Straight Straight Unplated Copper Battery Lug Gauge Stud Hole 1/4 (6mm) Stud Hole 5/16 (8mm) Stud Hole 3/8 (10mm) Stud Hole 1/2 (13mm) 8 L05472 L05474 L05473 L05471 6 LO5467 L05468 L05326 L05469 4 L05465 L05328 L05327 L05464 2 L05461 L05462 L05329 L05330 1 L05458 L05459 L05331 L05332 1/0 L05506 L05460 L05333 L05334 2/0 L05507 L05463 L05335 L05336 3/0 - - L05337 L05338 4/0 - - L05339 L05340 Extra Heavy Copper Lugs Gauge EX-Heavy 1/4 Tin-Plated Tin-Plated 5/16 Tin-Plated 3/8 8 L05492 L05494 L05493 6 L05489 L05491 L05490 4 L05341 L05486 L05342 1-2 L05479 L05480 L05343 1/0 L05477 L05478 L05345 2/0 L05481 L05482 L05347 3/0 L05483 L05484 L05350 4/0 Tin-Plated Copper Splice Solder Pellets Gauge Gauge 4 L05354 1-2 L05355 1/0 L05356 2/0 L05357 3/0 L05358 6 00145530 4 00145531 2 00145532 1 00145533 1/0 00145534 2/0 00145535 3/0 00145536 4/0 00145537
SECTION 14 PAGE 14 Thin Wall Heat Shrink Tubing Inside 6 Red 6 Black 12 Red 12 Black Dia. 1/8 0014026004R-6 001402600 0014026004R-12 0014026004-12 3/16 0014026005R-6 0014026005-6 0014026005R-12 0014026005-12 1/4 0014026006R-6 0014026006-6 0014026006R-12 0014026006-12 3/8 0014026008R-6 0014026008-6 0014026008R-12 0014026008-12 1/2 0014026009R-6 0014026009-6 0014026009R-12 0014026009-12 3/4 0014026010R-6 0014026010-6 0014026010R-12 0014026010-12 1 0014026011R-6 0014026011-6 0014026011R-12 0014026011-12 Thin Wall Heat Shrink Tubing - Spools Dia. Wire Range Length 1/8 26-22 Ga. 50 00140260000 3/16 18-16 Ga. 50 0014026005-600 1/4 16-14 Ga. 50 0014026006-600 5/16 12-10 Ga. 50 0014026007-600 3/8 10-8 Ga. 50 0014026008-600 1/2 8-2 Ga. 50 0014026009-600 3/4 6-1 Ga. 25 0014026010-300 1 1-3/0 Ga. 25 0014026011-300 Dual Wall Heat Shrink Tubing with Sealant Inside Dia. Wire Range NO OF THIS DOCUMENT MAY 212 Heat Shrink Tubing 6 Red 6 Black 12 Red 12 Black 1/8 26-18 Ga. 001429004R-6 0014005765-1 001429004R-12 0014005765 3/16 20-21 Ga. 001429005R-6 0014005766-1 001429005R-12 0014005766 1/4 1 Ga. 001429006R-6 0014005767-1 001429006R-12 0014005767 3/8 16-6 Ga. 001429008R-6 0014005768-1 001429008R-12 0014005768 1/2 8-4 Ga. 001429009R-6 0014005769-1 001429009R-12 0014005769 3/4 4-3/0 Ga. 001429010R-6 0014005771-1 001429010R-12 0014005771 1 2-4/0 Ga. 001429011R-6 0014005770-1 001429011R-12 0014005770
SECTION 14 PAGE 15 NO OF THIS DOCUMENT MAY Heat Shrink Tubing, Mounting Ties & Base Heavy Wall MIL-SPEC Heat Shrink Tubing with Sealant FOR MAXIMUM PROTECTION IN THE HARSHEST ENVIRONMENT RIGID HEAVEY WALL POLYLEFIN WITH A 3:1 SHIRNK RATIO 213 Wire Range 6 Red 6 Black 1-1/2 Red 1-1/2 Black 1 Ga. 0014021806 0014021106 12-4 Ga. 0014020506R 0014020506 0014020501R 0014020501 8-1 Ga. 0014021306 0014021206 0014021301 0014021201 2-4/0Ga. 0014021506 0014021406 0014021501 0014021401 Mounting Ties Size 7.9 0014005739 14 0014005740 Push Mount Cable Ties Size Weight 6 40 lb 0014101 8 50 lb. 0014100 4-way Adhesive Cable Mount with Screw Hole Size Screw Hole Color 3/4 x 3/4 #6 Black 0014005750 3/4 x 3/4 #6 White 00140057 1x1 #8 Black 0014005751 1x1 #8 White 0014005760 CAN T FIND IT? CALL OUR SPECIAL ORDER LINE: 1-800-225-6763
SECTION 14 PAGE 16 NO OF THIS DOCUMENT MAY Nylon Wire Tie with Steel Tab - White Size Lbs. 4 18 0014005705 4 18 0028004019 5-1/2 40 0014005703 6 40 0028004020 7 50 0014005708 8 40 0028004025 11 40 0014TB1011W 14 50 0028004040 18 120 0014TB1018W 214 Nylon Wire Tie Nylon Wire Tie with Steel Tab - Black Size Lbs. 4 18 0014005721 5-1/2 40 0014005719 7 50 0014005712 8 40 0014005731 11 40 0014TB1011 11 50 0014005713 13-1/2 120 0014005714 14 50 0014005715 18 120 0014TB1018 General Purpose Nylon Wire Tie - White Size Lbs. 4 18 0014005706 5-1/2 40 0014005707 8 50 0014005716 11 50 0014005720 14 50 0014005730 14 120 0014005717 15-1/4 120 0014005752 15-1/2 50 0014005723 21 175 0014005508 24 175 0014005500 36 175 0014005502 35 250 0014005746 48 175 0014005741 General Purpose Nylon Wire Tie - Black Size Lbs. 4 18 0014005700 5-1/2 40 0014005702 8 50 0014005710 8 120 00148120 11 50 0014005722 11 120 0014005725 14 50 0014005732 14 120 0014005718 15-1/4 120 0014005753 15-1/2 50 0014005724 21 175 0014005509 24 175 0014005501 36 175 0014005745 Nylon wire ties are the perfect way to secure wire/hose bundles from 1/2 to 10. The all nylon 6/6 construction features lightweight high strenth, and a high tempurature range. Black or UV-stabilized cable ties are ideal or all applications and can be used in the sun. They will prevent the sun from destroying the cable tie. All cable ties are UL approved. All cable ties have a listed tensile strength in pounds. This represents the minimum look strength of the specific wire tie. All wire cable ties are available in bulk packaging.
SECTION 14 PAGE 17 NO OF THIS DOCUMENT MAY 215 Wire Tie Colored Nylon Cable Tie Color Size Lbs. Blue 6 40 0014005650 Green 6 40 0014005651 Orange 6 40 0014005652 Red 6 40 0014005653 Yellow 6 40 0014005654 Blue 8 40 0014005650-1 Green 8 40 0014005651-1 Orange 8 40 0014005652-1 Red 8 40 0014005653-1 Yellow 8 40 0014005654-1 Red 8 50 0014005715-1 Orange 14 120 0014005718-1 Gray 48 175 0014005504 304 Stainless Steel Cable Tie Size Lbs. 6 100 0028440000 8 100 0028440001 14 100 0028440002 CAN T FIND IT? CALL OUR SPECIAL ORDER LINE: 1-800-225-6763
SECTION 14 PAGE 18 Mini Fuses NO OF THIS DOCUMENT MAY Fuses ALL OF THE SUPERIOR DESIGN FEATURES OF THE ATO FUSE IN A MORE COMPACT PACKAGE SILVER-PLATED TERMINALS PROVIDE SUPERIOR ELECTRICAL CONTACT HEAT-RESISTANT PLASTIC HOUSING PERMITES IT TO BE LOCATED IN HIGH-TEMPERATURE ENVORIONMENTS, SUCH AS THE ENGINE COMMENT PACKAGES OF 5 Amps Littlefuse No. Color 2 MIN 2 GRAY 0014020000 3 MIN 3 VIOLET 0014020001 4 MIN 4 PINK 0014020002 5 MIN 5 TAN 0014020003 7.5 MIN 7.5 BROWN 0014020004 10 MIN 10 0014020005 15 MIN 15 0014020006 20 MIN 20 0014020007 25 MIN 25 CLEAR 0014020008 30 MIN 30 GREEN 0014020009 Low Profile MINI Fuses ALL OF THE SAME QUALITY FEATURES BUILT INTO THE ATO FUSE IN A SMALLER MORE COMPACT PACKAGE LOW PROFILE DESIGN IS OEM ON TOYOTA AND GM PRODUCTS PACKAGES OF 5 Amps Color 5 TAN 00140021602 7.5 BROWN 00140021603 10 00140021436 15 00140021437 20 00140021439 25 CLEAR 00140021438 30 GREEN 00140021604 Blade Fuses 216 PLASTIC HOUSING WITH 2 BLADE TERMINALS WITH FUSE ELEMENTS FABIRCATED FROM A SINGLE PIECE OF METAL PACKAGES OF 5 Fuse Size Fuse Size ATO-3 0014005862 ATO-15 0014005872 ATO-4 0014005864 ATO-20 0014005874 ATO-5 0014005866 ATO-25 0014005876 ATO-7 0014005868 ATO-30 0014005878 ATO-10 0014005870
SECTION 14 PAGE 19 MAXI Fuses NO OF THIS DOCUMENT MAY Fuses DESIGNED TO PROTECT AUTOMOTIVE WIRING HARNESSES AND HIGH-APMAGE CIRCUITSE UNIVERSALLY INTERCHANGABLE PRODUCT (LIKE ATO/ATC FUSES) MAKING REPLACEMENT EASY PACKAGES OF 1 Amps Color 20 0014009920 30 GREEN 0014009930 40 ORANGE 0014009940 50 0014009950 60 0014009960 70 BROWN 0014009970 80 CLEAR 0014009979 217 Cartridge Fuses DEVELOPED TO MEET THE DAMAND OF SMALLER COMPONENTS. HI AMP PROTECTION IN COMPACT PACKAGES. 32V Amps Color 20 0014C20 25 WHITE 0014C25 30 PINK 0014C30 40 GREEN 00140C40 50 0014C50 60 0014C60 Low-Profile 58V Amps Color 20 0014CLP20 25 WHITE 0014CLP25 30 PINK 0014CLP30 40 GREEN 00140CLP40 50 0014CLP50 60 0014CLP60 Glass Fuses FUSE NO. AGA-1 0014005800 AGA-2 0014005802 AGA-3 0014005804 AGA-5 0014005806 AGA-30 0014005808 AGC-1/2* 0014005809 AGC-1 0014005810 AGC-1.25* 0014005811 AGC-1.5 0014005811-1 AGC-2 0014005812 AGC-3 0014005814 AGC-4 0014005816 AGC-5 0014005818 AGC-8 0014005820 AGC-10 0014005822 AGC-12 0014005823 AGC-15 0014005824 AGC-20 0014005826 AGC-25 0014005828 AGC-30 0014005830 AGW-4 0014005832 AGW-15 0014005834 AGX-20 0014005836 AGX-25 0014005838 AGX-30 0014005840 FUSE NO. GBC-5 0014005842 GCB-8 0014005844 GBC-16 0014005846 SFE-4 0014005848 SFE-6 0014005850 SFE-7-1/2 0014005852 SFE-9 0014005854 SFE-14 0014005856 SFE-20 0014005858 SFE-30 0014005860
218 SECTION 14 PAGE 20 NO OF THIS DOCUMENT MAY BLADE TYPE HOLDERS ALL HOLDERS SHOWN ARE FOR THE STANDARD ATOF/ATC FUSES. WIRE COLORS ARE TYPICAL, BUT ARE SUBJECT TO CHANGE. Fuses & Circuit Breakers NO. 001446417 32V/20A TWO 16 GA GPT WIRES 4 LEADS NO. 001446292 32V/30A 12 GA ORANGE GXL WIRE 4 LEADS WEATHER RESISTANT, WITH COVER NO. 001446229 32V/10A 18 GA UL1015 WIRE 4 LEADS SPLASH PROOF CAP NO. 001446239 IN-LINE BLADE ATOF/ ATC FUSE HOLDER 14 GA UL1015 WIRE 4 LEADS SPLASH PROOF CAP NO. 001446449 32V/20A TWO 16 GA BLACK GXL WIRES 4 LEADS WEATHER RESISTANT, WITH COVER NO. 001446239 32V/30A 12 GA GPT WIRE 8 LEADS NO. 001446238 32V/30A 10 GA UL1015 WIRE 12 LOOP SPLASH PROOF CAP NO. 001446046 30A IN-LINE BLADE ATOF/ ATC FUSE HOLDER WITH HARD PLASTIC COVER 12 GA GPT WIRE 11 LOOP STACKABLE FUSE SOLD SEPARATELY NO. 001446278 32V/30A IN-LINE BLADE ATOF/ ATC FUSE HOLDER, WITH COVER 12 GA UL1015 WIRE 4 LEADS NO. 001446448 32V/30A TWO 16 GA BLACK GXL WIRES 4 LEADS WEATHER RESISTANT, WITH COVER FUSE CLIP NO. 001446019 CLEAR COVER FOR NO. 001446448 NO. 001437061 1/4 PUSH-ON TERMINAL USE TO TAP OFF ON SIDE OF 1/4 BLADE FUSE
219 SECTION 14 PAGE 21 NO OF THIS DOCUMENT MAY Fuses & Circuit Breakers 4 Gang Fuse Block COMPLETE ASSEMBLY FOR ATOP OR ATC TYPE BLADE FUSES UNITS SLIDE TOGETHER TO GANG FOR MULTIPLE COMBINATIONS INCLUDES 12 GA GPT WIRE, 8 LEADS MOUNTING HOLES FOR #10 SCREWS ARE 3-1/8 A INDIVIDUAL COMPONENTS AVAILABLE-SEE CHART TERMINALS CAN BE PURCHASED ON REELS Description Body 001447080 Terminal Bus Bar 001432029 12 ga Terminal 001432036 16-14 ga Terminal 001432037 20-18 ga Terminal 001432038 Terminals on Reels Description Removal Tool 0014424 12 GA Terminals on Reel 001432036 16-14 Terminals on Reel 001431037R 16-14 ga Terminal 001430038R 20-18 ga Terminal 001432038 Sealed Fuse Holder Assemblies 32V/30A COMPLETE ASSEMBLY WITH BODY AND CAP SEALED, WEATHER RESISTANT WITH MOUNTING TAB ON CAP INDIVIDUAL COMPONENTS AVAILABLE FOR NO. 001446033 & 001446047 (SEE CHART) Description 12 GA GPT Wire 8 leads 001446033 12 GA GXL Wire 9 leads 001446047 Crimper Tool 0014407 Body with Seals Cap 001446010 12 GA Terminal 001432037 12 GA Terminals on Reel 001432037R ATOF/ATC Circuit Tap NO. 001446045 32V/30A MAX COMBINED ADD AN ADDITIONAL CIRCUIT JUST PLUG INTO ATOF/ATC FUSE SLOT FUSES SOLD SEPARATELY PRIMARY MAX 25A SECONDARY MAX 15A 3M Self Stripping Fuse Holder NO. 001446031 32V/20A FOR 14-18 GA GPT WIRE
SECTION 14 PAGE 22 NO OF THIS DOCUMENT MAY Mini Fuse That Lights When It Blows 12V INDICATOR LIGHT ON THE TOP OF THE FUSE GLOWS BRIGHTLY IF THE FUSE IS BLOWN ELIMINATES GUESS WORK AND SPEEDS THE REPLACEMENT OF THE BLOWN FUSE COLOR CODED FOR AMPERAGE SNAPS INTO PLACE WITHOUT SPECIAL TOOLS PROVIDES EASY IDENTIFICATION OF BLOWN FUSES IN HARD-TO-REACH LOACATIONS Amps Color 3 VIOLET 001446260 5 TAN 001446261 7.5 BROWN 001446262 10 001446263 15 001446264 20 001446265 25 CLEAR 001446266 30 GREEN 001446267 220 Fuses & Circuit Breakers Mini Automotive Fuse Holders NO. 001446486 32V/30A HOLDER FOR MINI AUTOMOTIVE FUSE 12 GA ORANGE GXL WIRE, 4 LEADS FUSES SOLD SEPARATELY NO. 001446486 32V/20A HOLDER FOR MINI AUTOMOTIVE FUSE 16 GA ORANGE GXL WIRE, 4 LEADS FUSES SOLD SEPARATELY Fuse Holder Assembly NO. 001446041 16V/30A COMPLETE ASSEMBLY WITH HOLDER AND COVER FOR MINI AUTOMOTIVE FUSE 12 GA ORANGE GXL WIRE, 10 LEADS INDIVIDUAL COMPONENTS AVAILABLE (SEE CHART) TWO TERMINALS REQUI FOR EACH ASSEMBLY TO MAKE A COMPLETE HOLDER Description NO. 001446486 12V/20A FOR USE WITH MINI FUSES THAT LIGHTS WHEN THEY BLOW 14 GA ORANGE UL1015 WIRE, 6 LEADS FUSES SOLD SEPARATELY Body 001438063 Cap 001446058 12 GA Terminal 001431075 Cable Seal 001439002 12 GA Terminal On Reel 001431075R TPA Clip 001438035
SECTION 14 PAGE 23 Mini Fuse Clips NO OF THIS DOCUMENT MAY 221 Fuses & Circuit Breakers NO. 001437062 3/16 PUSH ON BLADE NO. 001437064 FOR USE WITH MINI FUSES AND HOLDERS 1/4 PUSH ON BLACDE NO. 001437065 TAPS INTO POWER AT THE FUSE BLOCK 3/16 PUSH-ON Micro02 Fuses 32V NEW STANDARD FOR VEHICLE CIRCUIT PROTECTION SUB-MINIATURE DESIGN SPACE SAVING - ALLOWS MORE FUSES TO FIT IN A SMALLER SPACE USED AS A REPLACEMENT FUSE IN NEW VEHICLES COLOR CODED FOR EASY IDENTIFICATION -40ºC(-40ºC) 257ºF (125ºC) Micro 2 Fuse Circuit Tap NO. 001446177 20A Amps Color 2.5 TAN 001446116 7.5 BROWN 001446117 10 001446118 15 001446119 20 001446126 25 CLEAR 001446127 30 GREEN 001446128 Micro03 Fuses 32V 3 TERMINALS AND 2 FUST ELEMENTS WITH A COMMON CENTER TERMINAL SPACE SAVING WITH SUB-MINIATURE DESIGN MEETS THE NEED FOR MORE CIRCUITS TO BE PROTECTED WHILE UTILIZING LESS SPACE HIGH TEMPERATURE TOLERANCE IN ADVERSIVE ENVIRONMENTS -40ºC(-40ºC) 257ºF (125ºC) Amps Color 5 TAN 001446121 7.5 BROWN 001446122 10 001446123 15 001446124 Micro 2 Inline Fuse Holder NO. 001446488 15A 5 16 GA LEADS
SECTION 14 PAGE 24 NO OF THIS DOCUMENT MAY Universal Circuit Breakers UNIVERSAL CIRCUIT BREAKERS FUNCTION IDENTICALLY AND HAVE SAME INTERNAL COMPONENTS AS OEM BREAKERS BUT OFFER THE VERSATILITY OF SNAP OFF TERMINALS FOR GREATER FLEXIBILITY. SAE TYPE II MODIFIED RESET USED PRIMARILY AS A WIRING HARNESS PROTECTOR IN 12 VOLT DC AUTO-MOTIVE SYSTEMS. MEETS OEM REQUIREMENTS. CONFORMS TO SAE J553C STANDARD. DESIGNED TO MOUNT IN ATO STYLE FUSE BLOCKS AND PANELS. 222 Circuit Breakers Fuse Clip Circuit Breakers DIRECT REPLACEMENT FOR MANY OEM APPLICATIONS. DESIGNED FOR GLASS FUSES WITHOUT PHYSICAL ALTERATION IN THE SYSTEM. FITS 1-1/4 FUSE CLIPS. SAE TYPE II NON-CYCLING USED PRIMARILY AS A WIRING HARNESS PROTECTOR IN 12 VOLT DC AUTOMOTIVE SYSTEMS. CONFORMS TO SAE J553C STANDARD. Amps 5 0014UCB5 10 0014UCB10 15 0014UCB15 20 0014UCB20 25 0014UCB25 30 0014UCB30 Amps 10 0014CFB10 15 0014CFB15 20 0014CFB20 25 0014CFB25 30 0014CFB30 35 0014CFB35 40 0014CFB40 Manual Resettable Circuit Breakers MANUALLY RESETTABLE CIRCUIT BREAKERS FEATURE AN EXTERNAL BUTTON TO ALLOW RESETTING OF THE DEVICE IN A SAFE, CONVENIENT MANNER. SAE TYPE III MANUAL RESET USED PRIMARILY AS A WIRING HARNESS PROTECTOR IN HEAVY DUTY 12 VOLT DC TRUCK SYSTEMS. MEETS OEM REQUIREMENTS. DESIGNED TO MOUNT IN ATO STYLE FUSE BLOCKS AND PANELS. Amps OEM # Color 10 Navistar 2011944C1 Red 0014MBR10 15 Navistar 2011945C1 Blue 0014MBR15 20 Navistar 2011946C1 Gold 0014MBR20 25 Navistar 2011947C1 Silver 0014MBR25 30 Navistar 2011948C1 Green 0014MBR30
SECTION 14 PAGE 25 NO OF THIS DOCUMENT MAY Maxi Circuit Breakers Circuit Breakers DIRECT FACTORY REPLACEMENT FOR MANY DOMESTIC OEM APPLICATIONS. DESIGNED TO FIT A MAXI BLADE FUSE BLOCK OR PANEL. AVAILABLE IN EITHER SAE TYPE I CYCLING OR SAE TYPE II NON-CYCLING USED PRIMARILY AS A WIRING HARNESS PROTECTOR IN 12 VOLT DC AUTOMOTIVE SYSTEMS. MEETS OEM REQUIREMENTS. CONFORMS TO SAE J553C STANDARD. 223 Amps Application OEM # 20 Automotive Headlamp GM# 12065132 0014MCB20 30 Automotive Headlamp, Seats/Wipers GM# 12088553 0014MCB30 20 Automotive Power Devices - Heavy Truck & Auto Cooling fan 30 Automotive Power Window - Heavy Truck & Auto Cooling, Fan & Power Window GM# 12077842 Ford# F6HT-14526-KA GM# 12077843 Ford# F6HT-14526-LA 0014MXB20 0014MXB30 40 Heavy Truck Ford# F6HT-14526-JA 0014MXB40 Stud Type Low Voltage (6-12 Volts) Circuit Breakers SAE TYPE I AUTOMATIC RESET PROVIDES PROTECTION IN INSTALLATIONS WHERE IT IS NOT POSSIBLE TO MANUALLY RESET A BREAKER BECAUSE OF LOCATION OR SAFETY REQUIREMENTS. USED PRIMARILY ASA WIRING HARNESS PROTECTOR IN 12 VOLT DC AUTOMOTIVE SYSTEMS. CONFORMS TO SAE J553C STANDARD. AVAILABLE WITH MOUNTING BRACKET-CHANGE FROM 812 TO 813, E.G. 813005 ST. Amps 5 0014812005ST 6 0014812006ST 8 0014812008ST 10 0014812010ST 15 0014812015ST 20 0014812020ST 25 0014812025ST 30 0014812030ST 35 0014812035ST 40 0014812040ST 50 0014812050ST
224 SECTION 14 PAGE 26 NO OF THIS DOCUMENT MAY Flashlights MXN00320 WorkStar Pocket Floodlight Over 140 lumens of brilliant white light lets you easily see into the most obstructed areas Clear, even, extra-wide light pattern without hot or dark spots makes it easy to see what you are looking at Compact, light in weight clips easily into pocket Two position tailcap switch has a momentary and a full on position Great looking black anodized aluminum body AAA batteries included MXN02000 WorkStar Technician s Floodlight Over 300 lumens of brilliant, even white light with no hot spots or dark spots Moveable light head lets you direct the light where you want it Dual level light control, high and low Rechargeable - no batteries to buy 2.5 hours run time on high; 8 hours run time on low Dual rare earth magnets attach to ferrous surfaces Retractable hook allows you to hang it Flared Base allows standing the light on end Battery condition indicator light Includes a removable belt clip Includes a 12v charger and 115v charger Standard ¼-20 threaded hole for mounting on a tripod MXN00620 Technician s Headlamp 3 brightness levels High - 800 lumens, 2 hour runtime Medium - 400 lumens, 4 hour runtime Low 200 lumens, 8 hour run time Adjustable beam focussing for Light head pivots up and down or spot lighting Comfortable, adjustable head strap Charge time 4 hours Includes120v charger ARROW INDUSTRIAL SUPPLY PHONE ORDER RDER WWW.ARROWISI.COM
SECTION 14 PAGE 27 NO OF THIS DOCUMENT MAY Mini Bulbs Type 1 Type 2 Type 3 Type 4 Type 5 225 Type 6 Type 7 Type 10 Type 14 Miniature Bulbs TYPE NO. 37 Subminiature Wedge 0014005901 53 4 0014005905 57 5 0014005961 67 4 0014005931 74 14 0014005907 89 4 0014005955 97 4 0014005932 158 2 0014005930 193 2 0014005953 194 2 0014005904 194 NA 2 0014005934 198 1 0014005951 211-2 6 0014005949 212-2 6 0014005947 313 Miniature Bayonet 0014005956 631 Single Contact Bayonet 0014005925 756 Miniature Bayonet 0014001997 895 4 0014005967 906 2 0014005923 912 10 0014005924 921 10 0014005945 1003 3 0014005922 1004 1 0014005943 1073 3 0014005941 1141 3 0014005966 1156 3 0014005920 1157 1 0014005902 1157NA 1 0014005906 1816 5 0014005921 1828 0014005983 1891 5 0014005937 1893 5 0014005935 1895 4 0014005967 2057 1 0014005919 TYPE NO. 3057 7 0014005910 3057NA 1 0014005900 3155 8 0014005927 3156 NA 8 0014005903 3156 8 0014005928 3157 0014005996 3157NA 0014005991 9003 Headlight Capsule 0014005992 9005 Halogen Headlight Bulb 0014005999 9006 Halogen Headlight Bulb 0014005998 9007 Headlight Capsule 0014005993 H7 55W Headlight Capsule 0014005960 H4651 Wagner Halogen Lamp 0014005914 H4656 Wagner Halogen Lamp 0014005915 H4666 Wagner Halogen 0014005913 H6024 Wagner Halogen Headlight 0014005917 H6054 Wagner Halogen Bulb 0014005918 H6545 Headlight 0014005916 H9005 Halogen Capsule 0014005909 H9006 Halogen Capsule 0014005912 H11B Phillips Halogen 0014H11B H9004 Headlight Capsule 0014005968 SR120MB 0014005984 CAN T FIND IT? CALL OUR SPECIAL ORDER LINE: 1-800-225-6763