Content & Contact Details 2-3 Gen-flood /Double Gen-flood 4-6 Securi -Flood 7 Econo- flood range 8-10 Energy Saving Flood range 11 Miniflood HID CFL (LED) range 12-14 Mini Wedge CFL /Campa-lite 12V / (LED) 15-18 Industrial Highbay range 19 Industrial Lowbay range 20 Rondo Mini Bulkhead range (LED) 21-22 Rondo Slim range (LED) 23-24 Rondo Maxi Range 25-26 LED Flood range 27-32 Fluorescent range (WIRED FOR LED) 33 Exit signs 34 Accessories 35-38 Technical Info. 39-41 luminaire approved by SABS energy saving lamp energy efficient imported luminaire locally manufactured luminaire 2
VANGIFLASH (Pty)Ltd T/A RML LIGHTING Vat. Number: 4230264279 Reg. Number: 2013/115021/07 24 Ashfield Avenue, Springfield Park Durban Tel: +27 31 579 3090. Fax: +27 31 579 3021 Website: www.rml.co.za Dwaine Pieterse - Email: dwaine@rml.co.za Michael Longford - Email: michael@rml.co.za Mobile: +27 82 563 1989 Dwaine Pieterse - Email: dwaine@rml.co.za Mobile: +27 72 173 2953 Michael Longford - Email: michael@rml.co.za Mobile: +27 82 563 1989 Clint Groves - Email: sales@rml.co.za Mobile: +27 82 334 0932 Tracy Robinson - Email: tracy@rml.co.za Tracy Robinson - Email: tracy@rml.co.za Michael Longford - Email: michael@rml.co.za Website: www.rml.co.za Email: salesjhb@rml.co.za Mobile: +27 82 563 1989 Clint Groves - Email: sales@rml.co.za Mobile: +27 82 334 0932
Specially designed cooling fins on the lamp housing increase surface cooling area by 300%. Ribbed section in extrusion directly behind the lamp arc tube prevents light (heat) from being reflected back into the lamp arc tube preventing high lamp arc voltage and, therefore, cycling of lamp. All screws and fasteners of 316 marine grade stainless steel. Asymmetric/progressive parabolic reflector emits main beam at 38 from the vertical no light pollution. Wide beam spread 107 in horizontal and 93 in vertical planes. Can be supplied with hammered finish reflector ensuring very wide beam with no striations (billboard and tennis court lighting). Anti-vibration brackets optional for crane mounting. Can be supplied with hammered finish reflector ensuring very wide beam with no striations (billboard and tennis court lighting). Relatively light in weight allows for ease of installation. Lamp replacement without altering focus. Can be epoxy powder coated for extreme corrosion protection. Tennis courts and small sports field lighting, general flood and security lighting, building facades, car parks, billboard, ship and dredger lighting. Lamp housing: Consists of extruded aluminium sections (bright anodised to 15 microns), high pressure die cast aluminium side plates (LM6M low copper content aluminium alloy). Front glass: 5mm thick thermal shock resistant glass.
Control Gear Housing: Consists of extruded box shaped aluminium extrusions (anodised to 15 microns) with end plate of injection moulded glass reinforced nylon. Brackets : Attaching lamp housing to control gear housing and mounting bracket in extruded anodised aluminium (anodised to 15 microns) 250w/400w HP Sodium (HPS/T) 250w/400w Metal Halide (MH/T) tubular lamps Lamp housing IP65 Control Gear Housing IP54 CATALOGUE NO. RF250S RF400S RF250MH RF400MH LAMP TYPE 250w H.P Sodium (Tubular) 400w H.P Sodium (Tubular) 250w Metal Halide (Tubular) 400w Metal Halide (Tubular)
Essentially similar in all respects to the Genflood, this floodlight is designed to be equipped with two lamps. Lamps may be switched individually thereby providing two levels of illumination. This is ideal for sports field lighting in that for practice sessions light level may be reduced thereby saving power. More economical than using two separate floodlights. Lamps may be mixed. Sodium and Metal Halide this provides a more acceptable colour than pure Sodium. Can be epoxy powder coated for use in extremely corrosive areas. CATALOGUE NO. DRF250S DRF400S DRF250MH DRF400MH LAMP TYPE 250w H.P Sodium (Tubular) 400w H.P Sodium (Tubular) 250w Metal Halide (Tubular) 400w Metal Halide (Tubular)
Representing the latest in lighting technology and innovative design this floodlight is protected under Registered Design No. 8-007 and complies with Department of Public Works Specification No. 4/37(1) which supersedes Defence Specification No. W39-7/0043-5/E for perimeter fence security lighting. The floodlight utilises 2 lamps to provide a beam exactly 180 wide in the horizontal plane. Mounted 0.5m behind the fence at 3-4m mounting heights the poles may be spaced up to 90cm apart. No backward spillage of light enabling a patrolling guard to be totally invisible when 1m behind the fence. Relatively small compact design produces minimum target. No dark spot between poles in the event of on lamp failing. Extremely high ratio of Vertical illumination : Horizontal illumination (5:1 at 30mn outside fence) ensures that an intruder will cast a long dark shadow enabling him to be easily spotted. Control gear mounting plate slides out for ease of maintenance. Front glass 5mm thick Armour-plated physical and thermal shock resistant. Manufactured for use in harsh coastal corrosive climatic conditions all fasteners of 316 marine grade stainless steel. Lower than conventional mounting height means saving on pole costs and installation. Available for use with 70W, 150W, 250W and 400W HP sodium or metal halide tubular lamps. Can be epoxy powder coasted for use in extremely corrosive areas.
The housing is made of high-pressure die cast aluminium alloy with a high-purity, hammered aluminium reflector Medium to Wide beam High temperature silicon seal All fasteners stainless steel. Enclosure protection grade: IP65 Ideal for lighting sports fields, general areas and for security floodlighting CATALOGUE NO. RFC250 HPS/MH RFC250 MV RFC400 HPS/MH RFC400 MV RCF ES LAMP TYPE Tubular/Elliptical Tubular/Elliptical Tubular/Elliptical Tubular/Elliptical Tubular/Elliptical
Chemically treated against corrosion and Epoxy powder coated. Integral C/G housing fitted. All fasteners are stainless steel. High-purity hammered reflector. (aluminium) Single lamp replacement without disturbing the luminaires focus. Front glass 5mm thick, thermal shock resistant. Die-cast aluminium lamp housing. For use with 1000W 240V tubular lamps. For use in lighting large public areas, sports stadia, security and general area lighting. CATALOGUE NO. LAMP TYPE MASS RFC1000W MH 1000W Tubular 24kg RFC1000W MH+L 1000W Tubular 24kg
Chemically treated against corrosion and Epoxy powder coated. Separate die-cast aluminium C/G housing for remote mounting. All fasteners are stainless steel. High-purity hammered reflector. (aluminium) Single lamp replacement without disturbing the luminaires focus. Front glass 5mm thick, thermal shock resistant. For use with 2000W 380V tubular lamps. For use in lighting large public areas, sports stadia, security and general area lighting. CATALOGUE NO. LAMP TYPE MASS RFC2000W MH 2000W Tubular 36kg RFC2000W MH+L 2000W Tubular 36kg
The housing is made of high-pressure die-cast aluminium alloy with a high-purity, hammered aluminium reflector. Medium to Wide beam. All fasteners stainless steel. Enclosure protection grade: IP65 Ideal for general area and security lighting. Suitable for E27 CFL lamps. CATALOGUE NO. RFC85W ES + LAMP RFC105W ES + LAMP RFC ES EMPTY LAMP TYPE 85W E27 SPIRAL CFL 105W E27 SPIRAL CFL E27 SPIRAL CFL
Body Injection moulded U.V stabilised polycarbonate. Lens Injection moulded U.V stabilised polycarbonate. 4mm thick armour-plated thermal shock resistant glass. Stirrup Mounting Anodised (15 microns) aluminium bracket. Screws & Fasteners are 316 Marine grade steel. Ingress Protection grade: IP65 Applications include lighting Car Parks, Building Facades, Billboards & Signs, Walkways, General Security lighting. Wall mounted without bracket Bulkhead. Hidden internal hinge for cover. Extruded Anodised (15 microns) aluminium post top mounting bracket suitable for mounting single or double luminaires (optional). Body/Lid colour in grey (standard) CATALOGUE NO. MF80 MV MF125 MV MF70 HPS/MH E27 MF70 MH DOUBLE ENDED MF150 HPS/MH E27 MF150 MH DOUBLE ENDED LAMP TYPE 80W Mercury Vapour. 125W Mercury Vapour. 70W H.P Sodium/M Halide. 70W Double Ended M Halide. 150W H.P Sodium/M Halide. 150W Double Ended M Halide.
Hidden internal hinge for cover. Built-in photoelectric cell (optional). Extruded Anodised (15 microns) aluminium post top mounting bracket suitable for mounting single or double luminaires back-to-back(optional) Body/Lid colour in grey (standard) Body & Cover/Lens: Injection moulded U.V stabilised polycarbonate Reflector: 99.9% Pure chemically brightened anodised aluminium Stirrup Mounting Anodised (15 microns) aluminium Bracket. Screws & Fasteners are 316 Marine grade steel. Ingress Protection grade: IP65 Applications include lighting Car Parks, Building Facades, Billboards & Signs, Walkways and general Security lighting. Wall mounted without bracket Bulkhead. CATALOGUE NO. MF2X26 (Flat) MF2X26 (Bubble) MF1XES MF2XES LAMP TYPE 2 x PL26W CFL 2 x PL26W CFL 1 X E27 E.SAVING CFL 2 X E27 E.SAVING CFL
LED Body Injection moulded U.V stabilised polycarbonate. 4mm thick armour-plated thermal shock resistant glass. Stirrup Mounting Anodised (15 microns) aluminium bracket. Screws & Fasteners are 316 Marine grade steel. Ingress Protection grade: IP65 Applications include lighting Car Parks, Building Facades, Billboards & Signs, Walkways, General Security lighting. Wall mounted without bracket Bulkhead. Hidden internal hinge for cover. Extruded Anodised (15 microns) aluminium post top mounting bracket suitable for mounting single or double luminaires (optional). Body/Lid colour in grey (standard) Available in a range of wattages.
Suitable for compact fluorescent lamps from 7 to 26 Watts Manufactured from tough, UV stabilised polycarbonate IP65 (neoprene gasket) Available with built-in photocell Maintenance friendly clip-orientated lens Can be fitted with either switch start or electronic control gear Compact dimensions (230 x 220 x 85mm), Low mass (1.5 kg) Reflector: 99.9% Pure chemically brightened anodised aluminium Screws & Fasteners: 316 Marine grade steel Body colours: Green, Black or Grey Lens colours : Clear(Standard), Green, Amber, Blue Applications include general security lighting, garden lighting, billboard lighting. Wall mounted without bracket (bulkhead). CATALOGUE NO. RCF 7 RCF 9 RCF 11 RCF 13 RCF 18 RCF 26 RCF ES LAMP TYPE 1 X PL7W CFL 1 X PL9W CFL 1 X 11W CFL 1 X 13W CFL 1 X 18W CFL 1 X 26W CFL 1 X E27 Energy Saving CFL
Suitable for 11w 12V dc CFL lamps. Manufactured from tough, UV stabilised polycarbonate. IP65 (neoprene gasket). Maintenance friendly clip-orientated lens. Compact dimensions (230 x 220 x 85mm), Low mass (1.5 kg). Reflector: 99.9% Pure chemically brightened anodised aluminium. Screws & Fasteners: 316 Marine grade steel. Body and Lens colours as per MINIWEDGE. Current consumption with 11Watt 12V CFL= 0.9A. Fitted with 3m cab tyre. Wall mounted without bracket. CATALOGUE NO. CAMPALITE LAMP TYPE 11W E27 12V DC CFL
Body is manufactured from tough, UV stabilised polycarbonate (COASTAL FRIENDLY) IP65 (neoprene gasket) Available with built-in photocell Maintenance friendly clip-orientated lens Compact dimensions (230 x 220 x 85mm), Low mass (1.5 kg) Reflector: Aluminium. Screws & Fasteners: 316 Marine grade stainless steel. (COASTAL FRIENDLY) Body colours: Green, Black or Grey Lens colours : Clear, Green, Amber, Blue Applications include general security lighting, garden COLOUR MINI WEDGE OUTPUT WATT WATTS INPUT COLOUR LUMINOU TEMPERATURE S lm K RCF 10W LED RCF 15W LED RCF 20W LED LUMINOUS PER WATTS lm/w BEAM ANGEL 220V -50Hz WARM WHITE 2700 850 85 120 220V -50Hz WARM WHITE 3000 900 90 120 220V -50Hz WARM WHITE 3500 930 93 120 220V -50Hz NEUTRAL WHITE 4000 950 95 120 220V -50Hz COOL WHITE 5000 1000 100 120 220V -50Hz WARM WHITE 2700 1275 85 120 220V -50Hz WARM WHITE 3000 1350 90 120 220V -50Hz WARM WHITE 3500 1395 93 120 220V -50Hz NEUTRAL WHITE 4000 1425 95 120 220V -50Hz COOL WHITE 5000 1500 100 120 220V -50Hz WARM WHITE 2700 1700 85 120 220V -50Hz WARM WHITE 3000 1800 90 120 220V -50Hz WARM WHITE 3500 1860 93 120 220V -50Hz NEUTRAL WHITE 4000 1900 95 120 220V -50Hz COOL WHITE 5000 2000 100 120
LENS OPTIONS MATERIAL MAINTENANCE FRIENDLY CLIP ORIENTATED LENS, MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, IDEAL FOR GENERAL LIGHTING / SIGNAGE & BILLBOARD LIGHTING / GARDEN LIGHTING MAINTENANCE FRIENDLY CLIP ORIENTATED LENS, MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, IDEAL FOR GENERAL LIGHTING / SIGNAGE & BILLBOARD LIGHTING / GARDEN LIGHTING MAINTENANCE FRIENDLY CLIP ORIENTATED LENS, MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, IDEAL FOR GENERAL LIGHTING / SIGNAGE & BILLBOARD LIGHTING / GARDEN LIGHTING MAINTENANCE FRIENDLY CLIP ORIENTATED LENS, MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, IDEAL FOR GENERAL LIGHTING / SIGNAGE & BILLBOARD LIGHTING / GARDEN LIGHTING BODY OPTIONS MATERIAL MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, 316 MARINE GRADE STAINLESS STEEL FASTNERS/SCREWS, IP65 NEOPRENE GASKET,COMPACT DIMENTIONS (230mm X 220mm X85mm), LOW MASS 1.5KG MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, 316 MARINE GRADE STAINLESS STEEL FASTNERS/SCREWS, IP65 NEOPRENE GASKET,COMPACT DIMENTIONS (230mm X 220mm X85mm), LOW MASS 1.5KG MANUFACTURED FROM TOUGH UV STABALISESED POLYCARBONATE, 316 MARINE GRADE STAINLESS STEEL FASTNERS/SCREWS, IP65 NEOPRENE GASKET,COMPACT DIMENTIONS (230mm X 220mm X85mm), LOW MASS 1.5KG OPTIONAL EXTRAS APPLICATIONS GARDEN SPIKE - FOR GARDEN LIGHTING BUILT IN DAY/NIGHT SWITCH SPARES - LED CHIP/HOLDER/THERMAL PAD
Innovative design, simplicity and quality materials are combined to produce a range of efficient, economical and highly practical industrial Hi- Bay lighting fixtures for use with HID lamps. Control Gear Housing Constructed from aluminium extruded sections (natural anodised to 15 microns) for maximum protection against corrosion. Use of aluminium ensures maximum cooling. End caps made of injected moulded fibre glass re-enforced nylon. Reflector Is spun high purity aluminium, chemically brightened and anodised. Photometric data On application Control Gear Housing IP54 CATALOGUE NO. RB250 HPS/MH RB400 HPS/MH RB250 MV RB400 MV RB500 MB (E40) LAMP TYPE 250W H.P Sodium/M Halide 400W H.P Sodium/M Halide 250w Mercury Vapour 400w Mercury Vapour E40 ENERGY SAVER CFL ENERGY SAVER HI-BAY
Designed for use with H.I.D lamps in industrial applications with mounting heights between 3 and 5m. Also used extensively by service stations for lighting the petrol pump forecourts. Body can be supplied either in aluminium or mild steel. In both cases the metalwork is epoxy powder coated white. Specially designed stepped high purity aluminium reflector provides wide light distribution at low mounting heights. A totally enclosed version in 316 Marine Grade stainless steel with special breathing holes which allow for the luminaire to be hosed down is also available. Luminaire can be totally enclosed and sealed against the ingress of dust and moisture. CATALOGUE NO. MSCL250 HPS/MH/MV MSCL400 HPS/MH/MV ASCL250 HPS/MH/MV ASCL400 HPS/MH/MV LAMP TYPE 250W H.P Sodium/M Halide/M Vapour 400W H.P Sodium/M Halide/M Vapour 250W H.P Sodium/M Halide/M Vapour 400W H.P Sodium/M Halide/M Vapour
The RML Lighting Rondo Mini bulkhead luminaire has a very slim base manufactured from high-pressure injection moulded talc reinforced polypropylene. The lenses are manufactured from U. V. stabilised injection moulded polycarbonate. Suitable for compact fluorescent lamps from 2 x 9watt and 16watt 2D Up to 1x26w and 2x18w. IP65 (neoprene gasket). Available with built-in photocell. Available with polycarbonate or Aluminium Base. Depth of base: 30mm (overall depth with shallow prismatic lens: 70mm). Base/Body colour: BLACK Available with white, blue, green, yellow, black and red trim-rings Available with opal dome, shallow/deep prismatic and birds-eye lens covers. Optional RED Prismatic lens CATALOGUE NO. RBH/1XE27 RBH/2XE27 RBH/1XPL9 RBH/2XPL9 RBH/1XPL13 RBH/2XPL13 RBH/1XPL18 RBH/2XPL18 RBH/16W2D RBH/1XPL26 RBH/13WLED RBH/16W/LED LAMP TYPE 1X E27 2X E27 1X PL9 CFL 2X PL9 CFL 1X PL13 CFL 2X PL13 CFL 1X PL18 CFL 2X PL18 CFL 1X 16W 2D CFL 1X PL26 CFL 1X 13W LED 1X 16W LED Red Prismatic lens Trim ring colours
CLEAR LENS The RML Lighting SLIMLINE bulkhead luminaire has a very slim base manufactured from high-pressure injection moulded talc reinforced polypropylene. The lenses are manufactured from U.V. stabilised injection moulded polycarbonate. Suitable for compact fluorescent lamps from 2 x 9watt and 16watt 2D IP65 (neoprene gasket) Available with built-in photocell Can be fitted with clear prismatic lens or flat opal lens Depth of base: 30mm. Base colour: White Trim rings available in White and Black. CATALOGUE NO. RSB/ES/BE/W RSB/2PL9/BE/W RSB/16W2D/BE/W LAMP TYPE E27 Energy Saver 2 X PL9W 16W 2D OPAL LENS
The RML Lighting SLIMLINE bulkhead luminaire has a very slim base manufactured from high-pressure injection moulded talc reinforced polypropylene. The lenses are manufactured from U.V. stabilised injection moulded polycarbonate. 13W & 16W LED Panel. IP65 (neoprene gasket). Available with built-in photocell. Can be fitted with Clear Birdseye lens or Flat Opal lens. Depth of base: 30mm. Total Diameter : 236mm Base colour: White Trim rings available in White & Black. 16W LED PANEL Input Voltage:220-240v Frequency: 50/60Hz Rated Current: 0.135A Colour Temp: 5700k (Daylight) Lumen Output: 1750lm 13W LED PANEL Input Voltage:220-240v Frequency: 50/60Hz Rated Current: 0.12A Colour Temp: 5700k (Daylight) Lumen Output: 1400lm CATALOGUE NO. RSB/16WLED/FO/W RSB/16WLED/BE/W RSB/13WLED/FO/W RSB/13WLED/BE/W TYPE 16W LED OPAL LENS 16W LED CLEAR LENS 13W LED OPAL LENS 13W LED CLEAR LENS
RONDO MAXI BULKHEAD FEATURES These extremely versatile range of bulkhead luminaires are aesthetically pleasing, rugged and practical. Injection moulded in U.V. stabilised Polycarbonate with two types of diffuser and trim rings available in different colours. They may be equipped for use with a variety and combination of compact fluorescent lamps. All versions are suitable for side or back cable entry. They feature an enclosed gear compartment to conceal wiring and ballast. The compartment is designed to house and conceal emergency lighting gear if required. Suitable for compact fluorescent lamps up to 32w 2D, 2x18w and 2x26w. IP65 (neoprene gasket) Available with built-in photocell. Can be fitted with prismatic or opal diffusers. Trim ring colours: white and black. Gear compartment suitable for emergency lighting.
Wattage ranges from 10W/20W/30W/50W. Die-cast aluminium housing with UV Stabilized Poly Carbonate Cover. Fasteners made from stainless steel. Voltage: 190-250V AC. Colour Temperature: 6000K (95lm/w) UV Stabilized, Shock Proof Lens. Beam Angle 120 x 90 Ingress Protection grade: IP65. (Special TU Gasket) LED lifespan: 50000HOURS. Built in Surge Protection 2mm thick, 360 Rotatable Bracket. Available in Black as a Standard Useful applications include general outdoor lighting, garden lighting, billboard and sign lighting as well as building facades and car parks.
10w 20w 30w 50w Model Voltage Beam Angle Wattage RSP/LED10W AC 190V - 250V 90 X 120 10W RSP/LED20W AC 190V - 250V 90 X 120 20W RSP/LED30W AC 190V - 250V 90 X 120 30W RSP/LED50W AC 190V - 250V 90 X 120 50W Size PF CRI Lumens 121mm x 90mm x 36mm > 0.95 > 80 950 155mm x 115mm x 45mm > 0.95 > 80 1900 190mm x 140mm x 59mm > 0.95 > 80 2850 245mm x 180mm x 70mm > 0.95 > 80 4750
New SMD2835 LED Chip Focused lens 120 x 90 95 LM/W Bilateral Water Outlets, Plus Special TU Designed Waterproof Gasket IP>65 Lasered Logo Black, UV Stabilized, PC Cover. (Also Available in White on Special Request) Depression Screws Will Prevent Scratching Curved Body Design Increases Heat Area and Gives Unique Visual Effect 2mm Thick Bracket, 360 Rotatable Sloped Cable Gland, protects Cable and Improves Waterproofing Built in Surge Protection
Wattage s 100w and 200w Die-cast aluminium housing Fasteners made from stainless steel. Voltage: 190-250V AC. Colour Temperature: 6000K (95lm/w) UV Stabilized, Shock Proof Lens. Beam Angle 110 x 90 Ingress Protection grade: IP65. (Special TU Gasket) LED lifespan: 50000HOURS. Built in Surge Protection 2mm thick, 360 Rotatable Bracket. Available in Black only. Useful applications include general outdoor lighting, garden lighting, billboard and sign lighting as well as building facades and car parks. 30
Wattage A B C D E 100 Watt 414 mm 57 mm 235 mm 380 mm 200 mm 200 Watt 414 mm 57 mm 380 mm 380 mm 350 mm Model Wattage Voltage PF CRI Lumens Beam Angle RSP/LED100W 100 Watt AC 190V - 250V > 0.99 > 80 9500 90 X 110 RSP/LED200W 200 Watt AC 190V - 250V > 0.99 > 80 19000 90 X 110 31
32
One piece captive double-action snap lock poly carbonate clips securing the diffuser are standard. Stainless steel clips can be provided upon request. Available with both magnetic and electronic control gears High purity aluminium, stainless steel suspension brackets and quick installation. White painted metal control gear tray, easily removed by two integral snap lock devices. Available ranges : 5FT 58W single /double 4FT 36W single /double 2FT 18W double only CATALOGUE NO. RDHP/2X18/P - E.C.G RDHP/1X36/P - E.C.G RDHP/2X36/P - E.C.G / S.START RDHP/1X58/P - E.C.G RDHP/2X58/P - ECG / S.START RDHP/LED/P Now also wired for T8 LED Tubes LAMP TYPE 2X18W T8 Fluorescent 1X36W T8 Fluorescent 2X36W T8 Fluorescent 2X58W T8 Fluorescent 2X58W T8 Fluorescent LED T8 Fluorescent
2 X PL9W CFL lamps 230V maintained Rechargeable NICAD batteries 1x PL9W lamp will stay illuminated for 1 hour in the case of a power failure. Various signage can be ordered i.e.: running man, arrows etc. Down light component illuminating area directly below luminaire Dimensions: Length = 405mm X width = 225mm X height = 65mm CATALOGUE NO. EXIT 2XPL9 EXIT 2XPL9 + EMERGENCY LAMP TYPE 2XPL9W CFL 2XPL9W CFL 2 WAY EXIT 2XPL9 2XPL9W CFL 2 WAY EXIT 2XPL9 + EMERGENCY 2XPL9W CFL
The DN1 is a rugged and reliable photocell designed specifically for the harsh conditions of streetlight switching. Years of research into common failure modes has resulted in a product that rivals the world s best. High quality materials, high temperature electronic components and special contact material will provide years of reliable operation.
The DN-2 Photocell is a compact/rugged daylight switch that can operate both compact fluorescent lamps and incandescent lamps. The unit has a long, tapered sensor tube which makes it easy to install into light fittings. Two 3mm mounting holes are also provided. The unit features a high degree of lightning protection to provide many years of trouble free operation. The DN2-L version has the sensor connected by a fly lead. DN2 DN2+L 36
A wide variety of magnetic ballasts are available for both HID and Fluorescent luminaires. CHOKES/BALLAST 80W M. VAPOUR 125W M. VAPOUR 250W M. VAPOUR 400W M. VAPOUR 70W H.P SODIUM / M.HALIDE 100W H.P SODIUM / M.HALIDE 150W H.P SODIUM / M.HALIDE 250W H.P SODIUM / M.HALIDE 400W H.P SODIUM / M.HALIDE 9W - 18W CFL 20W / 26W / 36W CFL 58W CFL 1000W H.P SODIUM / M.HALIDE 220V 2000W H.P SODIUM / M.HALIDE 380V IGNITORS MZN 400 SU MZN 1000 SU MZN 2000 SU Ignitors for HID lamps 70W up to 400W. Ignitors for HID lamps 1000W and 2000W. We provide lighting capacitors designed for both series and parallel compensation of fluorescent lighting ballasts, mercury, metal halide, and sodium pressure lamps. Lighting capacitors are available in either thermoplastic or aluminium cases with a selection of terminal configurations and mounting options CAPACITORS 2 MFD 4 MFD 10 MFD 20 MFD 30 MFD 45 MFD
38
FORMULA: N= EAU x L x W CU x ø x LLD x M EAU = Lux Level Requirement L = Length of area W = Width of area CU = Coefficient of utilization ø = Lamp Light Output LLD = Lamp Lumen Deterioration M = Maintenance Factor
WATT TUBULAR (IM) ELLIPICAL (IM) STARTING AMPS RUNNING AMPS POWER FACTOR CORRECTION CAPACITOR 70 5900 5600 0.72 0.45 10 MFD 150 14500 14000 1.30 0.88 20 MFD 250 27000 25000 2.10 1.42 30 MFD 400 4800 47000 3.80 2.20 45 MFD 1000 130000 128000 8.80 5.50 100 MFD WATT TUBULAR (IM) ELLIPICAL (IM) STARTING AMPS RUNNING AMPS POWER FACTOR CORRECTION CAPACITOR 70 5000 4900 0.72 0.45 10 MFD 100 1700 9500 1.00 0.75 10 MFD 150 11500 10500 1.70 0.82 20 MFD 250 19000 17000 2.80 1.42 30 MFD 400 35000 33000 3.80 2.20 45 MFD 1000 80000-9.60 5.20 90 MFD 2000 8.8 A 380 V 200000-7.20 5.90 37 MFD 2000 10.3 A 380V 225000-8.20 6.80 60 MFD WATT TUBULAR (IM) ELLIPICAL (IM) STARTING AMPS RUNNING AMPS POWER FACTOR CORRECTION CAPACITOR 80-3800 0.90 0.45 10 MFD 125-6200 1.35 0.68 10 MFD 250-127000 2.10 1.35 20 MFD 400-22000 3.80 2.10 20 MFD 1000-57000 4.10 60 MFD WATT LM STARTING AMPS RUNNING AMPS POWER FACTOR CORRECTION CAPACITOR PL9 600 0.11 0.17 2 MFD PL13 900 0.15 0.10 2 MFD PL18 1200 0.12 0.13 4 MFD PL26 1800 0.31 0.19 4 MFD 16W 2D 1050 0.16 0.10 2 MFD 28 W 2D 2050 0.29 0.18 4 MFD WATT STARTING AMPS RUNNING AMPS POWER FACTOR CORRECTION CAPACITOR 18W STANDARD 1200 0.18 0.11 4 MFD 24W STANDARD 1800 0.24 0.15 4 MFD 36W STANDARD 2850 0.37 0.23 4 MFD 58 W STANDARD 4600 0.61 0.38 5 MFD
TYPE OF SPORT PRACTICE LEVEL MINOR LEAGUE MAJOR LEAGUE PRO LEVEL Lawn Bowls 20 lux 50 lux 100 lux 150 lux Tennis 50 lux 100 lux 150 lux 250 lux Football/Rugby 50 lux 100 lux 250 lux 450 lux Cricket outfield 50 lux 100 lux 250 lux 450 lux Cricket Pitch 100 lux 200 lux 400 lux 600 lux Hockey 50 lux 100 lux 250 lux 350 lux Swimming 50 lux 100 lux 150 lux 250 lux AREA OF WORK TYPE OF WORK LUX LEVELS General Engineering Rough Work 160 lux General Engineering Medium Work 400 lux General Engineering Fine Work 800 lux General Engineering Very Fine Work 1600 lux Inspection Areas Rough Work 160 lux Inspection Areas Medium Work 320 lux Inspection Areas Sub Assemblies 400 lux Inspection Areas Fine Work/ High Precision Mechanical 800 lux Office Areas Entrance Hall / Reception Area 160 lux Office Areas General Offices/Conference Rooms 500 lux Office Areas Computers / Machine Operating 630 lux Office Areas Drawing 800 lux Outdoor Areas Manual / Mechanical Loading 10 lux Outdoor Areas Service Station Forecourts 160 lux Warehouse Inactive Storage 20 lux Warehouse Loading Bays / Large Material Storage 100 lux Warehouse Small Material Storage / Dispatch and Packing 200 lux ROAD TYPE Freeway Major Arterial Roads Aerial Roads Minor Arterial Roads Minor Suburban Roads LUX LEVEL 20 lux 10 lux 10 lux 5 lux 2 lux 41