TECHNICAL BROCHURE B45-7HB R2 45HB, 7HB HIGH PRESSURE CENTRIFUGAL BOOSTER PUMP
FEATURES Multi-Stage Design: This configuration provides a steady, quiet and vibration-free operation for years of trouble-free service. Impellers and Diffusers: Glass filled thermoplastic. Precision molded for high efficiencies. Bowls: Constructed with 3 series stainless steel. Rabbet lock for positive alignment no gaskets required. Mechanical Seal: Carbon/ceramic faces. BUNA elastomers 3 series stainless steel metal parts. Motor: Close-coupled design. Ball bearings carry all radial/axial thrust loads. Designed for continuous operation. All ratings are within working limits of the motor. WARNING: This is a booster pump. It has no lift capability. DO NOT RUN DRY. DO NOT DEADHEAD. Wide variety of industrial, commercial and agricultural uses, especially: High rise buildings Multiple dwelling buildings Reverse osmosis systems High pressure cleaning Spraying systems Booster service Capacities: to 1 GPM Heads: to 76 feet. Pipe connections: Suction 2" NPT, Discharge 2" NPT. Temperature: 16ºF (71ºC) maximum. Inlet pressure: 1 PSI maximum. Rotation: right hand, i.e., clockwise when viewed from motor end. Open drip-proof* or TEFC* enclosure 6 Hz, 35 RPM. Threaded shaft extension. Single phase: 3 HP 115/28 23 V 5 HP 28 23 V 7½ HP 28 23 V. Three phase: 3 1 HP 28 23/46 V. * Premium efficiency where required by Department of Energy regulations. PAGE 2
MODELS Order No.* HP No. of Stages Phase Enclosure** Frame W.E.L. Weight (lbs.) 45HB1312 3 3 1 ODP 182 11½ 88 45HB2312 3 2 1 TEFC 184 1 3 8 11 45HB1335 3 3 3 ODP 145 11½ 59 45HB2335 3 2 3 TEFC 182 1 3 8 83 45HB1513 5 5 1 ODP 184 13 7 8 1 45HB2513 5 4 1 TEFC 213 12¾ 147 45HB1535 5 5 3 ODP 182 13 7 8 8 45HB2535 5 4 3 TEFC 184 12¾ 99 45HB17513 7½ 7 1 ODP 213 16¼ 169 45HB17535 7½ 7 3 ODP 184 16¼ 13 45HB27535 7½ 6 3 TEFC 213 15 1 8 15 45HB11135 ➀ 1 1 3 ODP 213 21½ 155 45HB21135 1 8 3 TEFC 215 17½ 19 7HB1312 3 2 1 ODP 182 1 3 8 86 7HB2312 3 2 1 TEFC 184 1 3 8 99 7HB1335 3 2 3 ODP 145 1 3 8 57 7HB2335 3 2 3 TEFC 182 1 3 8 81 7HB1513 5 4 1 ODP 184 12¾ 98 7HB2513 5 3 1 TEFC 213 11½ 145 7HB1535 5 4 3 ODP 182 12¾ 78 7HB2535 5 3 3 TEFC 184 11½ 97 7HB17513 7½ 6 1 ODP 213 15 1 8 17 7HB17535 7½ 6 3 ODP 184 15 1 8 11 7HB27535 7½ 5 3 TEFC 213 13 7 8 148 7HB11135 ➀ 1 9 3 ODP 213 2¼ 153 7HB21135 1 7 3 TEFC 215 17½ 188 * Add PE to end of nomenclature for premium efficient versions. ** Premium efficiency where required by Department of Energy regulations. OPTIONAL SUPPORT LEG dimensions (in inches) Model Frame A B C AM2 182/184 4 1 8 5 3 8 4½ AM21 213/215 4 1 8 5 3 8 5¼ NOTE: Support leg is not required for 145 frame motors. A B C Optional Support Leg PAGE 3
COMPONENTS 3 6 7 5 8 SUCTION 11 DISCHARGE 8 9 1 4 1 2 Item No. Description Material 1 Hex shaft and coupling 3 series stainless steel 2 Suction housing Brass (ASTM B584) 3 Discharge head Brass (ASTM B584) 4 Shaft sleeve 3 series stainless steel 5 Bowl 3 series stainless steel 6 Diffuser Glass-filled thermoplastic 7 Impeller Glass-filled thermoplastic 8 Marine bearing BUNA 9 Casing 3 series stainless steel 1 ➀ Intermediate bearing spider Brass (ASTM B584) only on 9 and 1 stage units 11 Mechanical seal Carbon/ceramic faces, BUNA elastomers, 3 series stainless steel metal parts. PAGE 4
DIMENSIONS determined by motor (in inches) Frame A AB B BG C D E F G H O 145 6½ 5¼ 5 15 16 4 7 8 6 3½ 2¾ 2 5 32 11 32 6 5 8 182 184 8½ 6 6½ 5¾ 9 9 16 4½ 3¾ 2¼ 5 32 13 32 8½ 213 215 9½ 7 3 8 8 7¼ 9 7 16 5¼ 4¼ 2¾ 7 32 13 32 1 3 16 (All dimensions are in inches. Do not use for construction purposes.) AB Approx. 2" NPT Disch. W.E.L. 2" NPT Suction 2 5 /8" BG C Max. 3 1 /8" D G 5 3 /8" Dia. O Max. E A E F F B 4-H Dia. Holes PAGE 5
45HB CLOSE-COUPLED MULTI-STAGE PUMP CURVES METERS TOTAL DYNAMIC HEAD 2 15 1 5 FEET 8 7 6 5 4 3 2 1 45HB1 1 STG 45HB75 7 STG 45HB5 5 STG 45HB3 3 STG BASED ON ZERO INLET PRESSURE MODEL 45HB SIZE 3 1 HP ODP* RPM 35 IMP. B1761 SERVICE FACTOR 1.15 1 1 2 3 4 5 6 7 U.S. GPM EFF. % 7 6 5 4 3 2 TOTAL DYNAMIC HEAD METERS 2 15 1 5 FEET 8 7 6 5 4 5 1 15 m 3 /h 45HB1 8 STG 45HB75 6 STG CAPACITY MODEL 45HB SIZE 3 1 HP TEFC* RPM 35 IMP. B1761 SERVICE FACTOR 1. 7 3 6 5 2 4 3 1 2 1 1 2 3 4 5 6 7 U.S. GPM 45HB5 4 STG BASED ON ZERO INLET PRESSURE 45HB3 2 STG EFF. % 5 1 15 m 3 /h CAPACITY * Premium efficiency where required by Department of Energy regulations. PAGE 6
7HB CLOSE-COUPLED MULTI-STAGE PUMP CURVES METERS TOTAL DYNAMIC HEAD 2 15 1 5 METERS TOTAL DYNAMIC HEAD 16 12 8 4 FEET 7 6 5 4 3 2 1 7HB1 9 STG 7HB75 6 STG 7HB5 4 STG 1 7HB3 2 STG 2 BASED ON ZERO INLET PRESSURE 3 4 5 6 7 MODEL 7HB SIZE 3 1 HP ODP* RPM 35 IMP. B1811 SERVICE FACTOR 1.15 1 9 1 U.S. GPM 5 1 15 2 m 3 /h CAPACITY FEET 6 5 4 7HB1 7 STG 7HB75 5 STG 3 2 7HB5 3 STG 7HB3 2 STG 1 BASED ON ZERO INLET PRESSURE 8 MODEL 7HB SIZE 3 1 HP TEFC* RPM 35 IMP. B1811 SERVICE FACTOR 1. EFF. % 7 6 5 4 3 2 EFF. % 7 6 5 4 3 2 1 1 2 3 4 5 6 7 8 9 1 U.S. GPM 5 1 CAPACITY 15 2 m 3 /h * Premium efficiency where required by Department of Energy regulations. PAGE 7
Xylem 1) The tissue in plants that brings water upward from the roots; 2) a leading global water technology company. We re a global team unified in a common purpose: creating innovative solutions to meet our world s water needs. Developing new technologies that will improve the way water is used, conserved, and re-used in the future is central to our work. We move, treat, analyze, and return water to the environment, and we help people use water efficiently, in their homes, buildings, factories and farms. In more than 15 countries, we have strong, long-standing relationships with customers who know us for our powerful combination of leading product brands and applications expertise, backed by a legacy of innovation. For more information on how Xylem can help you, go to www.xyleminc.com Xylem Inc. 2881 East Bayard Street Ext., Suite A Seneca Falls, NY 13148 Phone: (8) 453-6777 Fax: (888) 322-5877 www.gouldswatertechnology.com Goulds is a registered trademark of Goulds Pumps, Inc. and is used under license. 216 Xylem Inc. B45-7HB R2 June 216