circumferential piston Pump Capacity to 190 m /hr / 86 USGPM Pressure to 1 BAR / 50 PSI Viscosity to 0,000 cst /,000,000 SSU Temperature to 150 C / 00 F hygienic pump solutions
A b o u t WRIGHT FLOW TECHNOLOGIES A b o u t REVOLUTION Your Complete Hygienic Solutions Provider Raise the bar on performance & ease of maintenance with the. is the most advanced circumferential piston pump in the industry with front loading seals. Also, it is the only pump available with patented hybrid technology, allowing CPP or RLP technologies. Global presence with localized service Broadest PD pump offering in the industry Complete partner for your hygienic process Around the world, Wright Flow Technologies provides solutions for challenges in fluid handling. You can count on the reliability of Wright Flow hygienic positive displacement (PD) pumps. Matching the right pump with your fluid processing needs is easy with innovative, robust designs, cleanability & an extensive product offering. How it Works Training The deep channels in which the rotors travel provide large voids to minimize shear and bruising of solids. Accessories Remanufacturing Suction Service Discharge Wright Flow Technologies rotor wings (pistons) rotate around the circumference of the channel in the pump casing. This continuously generates a partial vacuum at the suction port as the rotors unmesh, causing fluid to enter the pump. Parts The fluid is transported around the channel by the rotor wings, and is displaced as the rotor wings re-mesh, generating pressure at the discharge port. Pump output is directly proportional to speed, and direction of flow is reversible. Pumps www.wrightflowtechnologies.com H y g i e n i c P u m p S o l u t i o n s Circumferential Piston Pump
FEATURES & BENEFITS F e at u r e s & B e n e f i t s cleanability Efficient CIP (Clean In Place) ability is standard for all pumps Self draining pump head from innovative cusps & cusp reliefs Innovative seal design with no dead zones & a dynamic leak path No dead zones on front cover Ease of Maintenance Fast, front loading seal changes while pump is still in line Easy front access shimming for setting rotor clearance Convenient preventive maintenance parts kits available Performance Improved volumetric efficiency in low & high viscosity applications Easy Access Front Loading Seal Changes Up to 15% better flow performance than competitors CIP configuration Long-life durability from heavy duty shafts, bearings & helical gears www.wrightflowtechnologies.com Remove Cover Remove Rotors Change Seals Change seals more efficiently with just three steps to access the seals while the pump is still in line! And for maximum utility, the comes out of the box with interchangeable O-ring and mechanical seals (including single or double seals). Exclusive, non-galling WFT 808 alloy rotors standard; permits running at tighter clearances 1 H y g i e n i c P u m p S o l u t i o n s Circumferential Piston Pump 5
OPTIONS SPECIFICATIONS performance range: Capacity pressure viscosity temperature to 190 m /hr / 86 USGPM to 1 BAR / 50 PSI to 0,000 cst /,000,000 SSU to 150 C / to 00 F Compliant with the following standards Size CPP Model* Capacity Displacement Pressure Speed Standard Ports Temperature m³/hr USG/min. l/rev. USG/rev. BAR PSI RPM mm in. Deg. C Deg. F R0150X.6 11 0.055 0.01 1 05 800 8.1 1.5 150 00 R0180P 5. 0.11 0.09 1 0 800 8.1 1.5 150 00 Porting: Hygienic port options: Tri-clamp, DIN 1186, DIN 11851 Male, SMS Male Industrial port options: ASA/ANSI 150 lb. or 00 lb. RF, DIN 6, BSP Male, NPT Male Rectangular flange/hopper inlet available on select sizes Pumps may be fitted with front cover and rotor case jackets when required SealS: Single mechanical Double mechanical w/ flush Single O-ring running on a replaceable sleeve Double O-ring w/ flush running on a replaceable sleeve Complete range of material options Gear Box: Powder coated cast iron standard Stainless steel optional Oil lubrication standard, grease optional complete pump drive units: Wright Flow Technologies makes it simple to select your pump, drive and base configuration for ordering a complete unit Close coupled and long coupled designs available Tubular, flat plate and formed metal base designs available RotorS: Non-galling WFT 808 nickel alloy standard for CPP 16 L standard for RLP and optional for CPP Optional clearances: front face, hot, high temperature/ high viscosity (chocolate) SURFACE FINISH: Standard RA internal finish Optional mechanical internal finishes: RA 16 RA or better Electropolish PREVENTIVE MAINTENANCE SIMPLIFIED... kits now available 5 6 7 Size R000X 8 0.16 0.0 1 05 800 8.1 1.5 150 00 R000X 11 8 0. 0.06 17 7 800 8.1 1.5 150 00 R000X 1 6 0.9 0.08 1 0 800 50.8 150 00 R050X 15 67 0. 0.1 1 50 600 50.8 150 00 R0600P 1 9 0.58 0. 1 05 600 6.5.5 150 00 R0800X 8 1 0.77 0. 17 7 600 6.5.5 150 00 R100X 6 159 1 0. 1 0 600 76. 150 00 R1800X, R180X 5 1 1.6 0. 1 50 600 76. 150 00 R00X, R0X 71 1 1.98 0.5 1 05 600 101.6 150 00 R600P, R60P 91 99.5 0.7 1 0 600 101.6 150 00 R00P, R0P 108 76.00.800 1 05 600 15. 6.0 150 00 R800P, R80P 18 606.80 1.00 1 0 600 15. 6.0 150 00 R900P, R90P 17 761.80 1.0 8 116 600 15. 6.0 150 00 R00P, R0P 18 65 6.0 1.60 8 00 00 15. 6.0 150 00 R500P, R50P 190 86 9.00.0 1 00 50 0. 8.0 150 00 Rectangular Flange Model Capacity Displacement Pressure Speed Inlet (WxL) Outlet Temperature m³/hr USGPM l/rev. USG/rev. BAR PSI RPM mm in. mm in. Deg. C Deg. F 00 11 8 0. 0.06 17 7 800 7 x 17 1.85 x 6.81 50.8 150 00 *Models ending with 0 are Aseptic Models 060 1 9 0.58 0. 1 05 600 60 x 6.6 x 8.90 6.5.5 150 00 10 6 159 1 0. 1 0 600 81 x 6.19 x 9.9 76. 150 00 5 0 71 1 1.98 0.5 1 05 600 10 x 85.06 x 11. 101.6 150 00 Hygienic Pump Solutions 6 www.wrightflowtechnologies.com Circumferential Piston Pump 7
Exceptional Cleanability Ease of Maintenance Superior Performance Frame 1.5 in. (8.1 mm) Frame 1.5 or in. (8.1 or 50.8 mm) Frame,.5 or in. (50.8, 6.5 or 76. mm) Frame 5 or in. (76. or 101.6 mm) Frame 6 6 in. (15. mm) CPP ONLY Frame 7 6 or 8 in. (15. or 0. mm) CPP ONLY F o r m o r e i n f o r m at i o n, c o n tac t yo u r lo c a l a u t h o r i z e d W r i g h t F l o w T e c h n o l o g i e s D i s t r i b u t o r o r c o n ta c t u s at: Wright Flow Technologies, Inc. 06 State Street Cedar Falls, IA 5061 USA Phone: (19) 68-801 E-mail: wright.usa@idexcorp.com W r i g h t F l o w T e c h n o l o g i e s Lt d. visi t us onl ine Highfield Industrial Estate, Edison Road Eastbourne East Sussex, United Kingdom, BN 6PT Phone: +(0) 1 50911 E-mail: wright.eu@idexcorp.com Wright Flow Technologies suzhou Block 6, No.8 Xing Long Street Su Chun Industrial Square, Suzhou Industrial Park Suzhou 1516, China Phone: (051) 68000* wrightflowtechnologies.com Copyright 01 Wright Flow Technologies. All Rights Reserved. revolution_cpp_bro-rev081