Installation Instructions BULL BAR (Part # 51033&51034) SIERRA 1500 / SILVERADO 1500

Similar documents
Installation Instructions SRC Over-Size Tire Carrier Jeep Wrangler/Unlimited Part # 2743

Installation Instructions Receiver Rack (Part # 7700) Universal Application

(W) INSTALLATION INSTRUCTIONS 3 BULL BAR

Installation Instructions

(W) INSTALLATION INSTRUCTIONS 3 BULL BAR FORD F (Excl Heritage edition) / EXPEDITION PART # / / /

3 BULL BAR 2015 CHEVY COLORADO/GMC CANYON (W) INSTALLATION INSTRUCTIONS 3 BULL BAR CHEVY COLORADO/GMC CANYON 2015 PART # /

(2) Light Brackets. Driver/right Frame Mounting Bracket. Passenger/left Frame Mounting Bracket

mm Hex Nuts. (2) 10mm x 35mm Bolt Plates

Installation Instructions

Passenger/Right Side Frame Bracket. Driver/Left Side Frame Bracket. (4) Spacer Washers. (2) Bull Bar Mounting Brackets

INSTALLATION INSTRUCTIONS EVO3 LIGHT BAR 2015 CHEVY COLORADO/GMC CANYON

INSTALLATION INSTRUCTIONS 3 BULL BAR CHEVY SILVERADO1500/GMC SIERRA TAHOE/SUBURBAN/YUKON/YUKON XL

3.5" Oval Bull Bar. Part No. B1519S/B. PARTS LIST: Qty Part Description Qty Part Description

Driver/Left Side Front Mounting Bracket (longer bracket) Front Mounting Bracket (longer bracket)

2015 Ford F Bull Bar

INSTALLATION INSTRUCTIONS 3 BULL BAR W-BUILT IN LED LIGHT TOYOTA TACOMA

L Light Bracket Crossbar Light Mount Bracket. Driver/left Support Bracket

INSTALLATION INSTRUCTIONS

(2) Top Support Backing Plates. Passenger/Right Top Bracket. (2) Frame Mounting Brackets. (2) 12mm x 35mm Single Bolt Plates

(2) Universal Light Brackets. Passenger/Right Mounting Bracket. Driver/Left Mounting Bracket

Passenger/Right. Driver/Left. Driver/Left Side Frame. Mounting Bracket. (2) 12mm Double Nut Plates (models without tow hooks)

The Quality Truck Accessory Реор/е PLEASE INSPECT YOUR PRODUCT FOR DAMAGE BEFORE PROCEEDING ТО INSTALLATION.

06-08 Passenger/Right Top Mounting Bracket Driver/Left Top. Mounting Bracket. Driver/Left Frame Mounting Bracket

Passenger/Right Top Support Bracket. (4) Spacer Plates (use on models without tow hooks. (2) 12mm x 100mm Double Bolt Plates

(2) 12mm x 35mm Single Bolt Plates. (2) 12mm x 30mm Double Bolt Plates

INSTALLATION INSTRUCTIONS GRILLE GUARD F-150 P/N 3066;3066-2

INSTALLATION INSTRUCTIONS

Passenger/Right Top Support Bracket. (2) 10mm Nut Plates

(W) INSTALLATION INSTRUCTIONS GRILLE GUARD 2014 GMC SIERRA 1500 EXCLUDES DENALI PART # /

INSTALLATION INSTRUCTIONS BULL BAR DODGE RAM 1500 PART # B-D1091;B-D2091

11-16 Jeep Grand Cherokee 4 Oval Sidebars

INSTALLATION INSTRUCTIONS GRILLE GUARD SILVERADO 1500 PART #

Jeep JK Wrangler Modular HD Front Winch Bumper

INSTALLATION INSTRUCTIONS FRONT RUNNER GRILLE GUARD 2015 TRANSIT VAN (FULL SIZE)

Driver Side Support Bracket pictured in "no-tow hook" direction. Reverse direction for tow hook equipped vehicles

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTION BULL BAR DODGE RAM 1500 PART NUMBER

12 6mm x 22mm OD x 2mm Flat Washers mm x 40mm Button Head Bolt Plates 12 6mm Hex Nuts 6 12mm Plastic Retainers

INSTALLATION INSTRUCTIONS JEEP WRANGLER PART# 1050 /

INSTALLATION INSTRUCTIONS GRILLE GUARD GMC SIERRA 1500 EXCLUDES DENALI PART # 4084/

INSTALLATION INSTRUCTIONS

3.5 Oval Bull Bar. Part No. B1508S/B READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION

PARTS LIST: VIEWPOINT RUNNING BOARD NISSAN MURANO EXCLUDES 2dr CROSSCABRIOLET CONVERTIBLE

Driver/Left Rear Inner Support Bracket. (2) Front Bracket Arms

PARTS LIST: HEAVY DUTY FRONT BUMPER FORD SUPERDUTY F

6 6mm Nylon Lock Nuts 4 12mm Lock Washers 12 6mm Hex Nuts 4 12mm x 32mm x 3mm Flat Washers. (2) 12mm x 40mm Narrow Bolt Plates (Rear)

Installation Instructions Soft Top Replacement Hardware, Wrangler

(4) 12mm Plastic Retainers

INSTALLATION INSTRUCTIONS 3063 / FORD F-150

PROCEDURE: Example of GM factory body mount bolt

Installation Instructions: Bumper (Part # SB76854) XJ Jeep Cherokee XRC Body Armor 4-Door

(W) INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA / SEQUOIA PART # &

(2) 10mm x 50mm T-Bolts (For Rear Brackets only) (6) 10mm Rod Bolts. (2) 10mm x 35mm Button Head Bolt Plates

Installation Instructions: (Part # SB76828) Jeep JK 2dr/4dr XRC Modular Front Bumper Full Width End Plate Kit

The Quality Truck Accessory Реор/е PLEASE INSPECT YOUR PRODUCT FOR DAMAGE BEFORE PROCEEDING ТО INSTALLATION.

INSTALLATION INSTRUCTIONS RATTLER STEEL RUNNING BOARDS DODGE RAM 1500 QUAD CAB

Passenger/Right Support Bracket Driver/Left Support Bracket

Installation Instructions

INSTALLATION INSTRUCTIONS / DODGE RAM P/U QUAD CAB DODGE RAM P/U QUAD CAB 2500/3500

(2) 10mm x 50mm T-Bolts (For Rear Brackets only) (6) 10mm Rod Bolts. (2) 10mm x 35mm Button Head Bolt Plates

(6) Plastic Retainers. Mounting Bracket

INSTALLATION INSTRUCTIONS PART # 9B048803SS/9B048803A SIDE BAR FOR FORD ESCAPE 2013

INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063

INSTALLATION INSTRUCTIONS HEAVY DUTY FRONT BUMPER 2015 FORD F150

PARTS LIST: PROCEDURE:

INSTALLATION INSTRUCTIONS 3 90 DEGREE BENT END SIDEBARS 2019 DODGE RAM 1500 CREW CAB EXCLUDES BODY LIFT KIT

INSTALLATION INSTRUCTIONS HEAVY DUTY FRONT BUMPER CHEVY SILVERADO 1500

Installation Instructions

(2) Support Brackets (fit left or right) (2) 12mm x 40mm Bolt Plates

3" Nerf Bars Installation Instructions. # Standard Cab. # Super Crew. # Super Cab

Installation Instructions: (Part # SB612850) TOYOTA FJ CRUISER M1 Front Bumper Kit

INSTALLATION INSTRUCTIONS 5" OVAL WHEEL TO WHEEL SIDEBARS DODGE RAM MEGA CAB 6-1/2FT BED

I-Sheet Number Rev.B 3-1/2 OVAL BULL BAR DODGE RAM 1500

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # 2067/2067-2

INSTALLATION INSTRUCTIONS PART#: /241533B 6" OVAL BENT SIDE BAR FOR DODGE RAM 1500 CREW CAB 09-16

(2) License Plate Plugs

(W) INSTALLATION INSTRUCTIONS 90DEG BENT END SIDEBARS F-150 SUPER CREW CAB PART #DZ /DZ /DZ

2 Driver/left Front/Rear Mounting Brackets 6 10mm Lock Washer 2 Passenger/right Front/Rear Mounting 6 10mm Hex Nuts

Passenger/Right Upper U- Bracket OE fog light only. Driver/Left Upper U- Bracket OE fog light only. Winch Tray

License Plate Bracket (4) Rubber Plugs. (2) Retaining Rings (2) Foam Spacers

8mm Bolt Plate. (5) Left or Right Mounting Brackets. Passenger/right front. only Upper Bracket

HD BULL NOSE FRONT BUMPER FORD SUPERDUTY F PARTS LIST:

LD1 FRONT BUMPER GMC SIERRA 1500

3" SIDEBARS BODY BOLT MOUNT SILVERADO/SIERRA CREW CAB (Excl. C/K Classic )

INSTALLATION INSTRUCTIONS GRILLE GUARD TOYOTA TUNDRA TOYOTA SEQUOIA PART # P2067

(2) 12mm x 40mm Short Low Profile Bolt Plates. (2) Spacer Washers. (4) 12mm Plastic Retainers. Passenger/Right Front.

ECO-SERIES FRONT BUMPER FOR GM SIERRA #GM-19337

(4) 10mm x 35mm Bolt/8mm Nut Plates. (2) 12mm Double Nut Plates. (2) Center Mounting Brackets (use for driver or passenger side)

INSTALLATION INSTRUCTIONS ELEVATION FRONT BUMPER 2018 FORD F150

8mm Bolt Plate. Passenger/right front only Upper Mounting Bracket

ODY-10-1 rev. B FUEL PRESSURE GAUGE

Passenger/right Upper U- Bracket OE fog light only. Driver/Left Upper U- Bracket OE fog light only. Winch Tray

8mm Bolt Plate. (15) 8mm U-Clip Nuts. Passenger/right front Upper Bracket

INSTALLATION INSTRUCTIONS FORD F-150 2WD & 4WD RETAINS FACTORY TOW HOOKS PART #P3063

INSTALLATION INSTRUCTIONS PART#: SR-GMR13796 SPARTAN RUNNING BOARD CHEVY EXPRESS 1500/2500/3500 GMC SAVANNA 1500/2500/ UP

ODY-19-1 AIR PRESSURE GAUGE

Driver/left Corner Fill Panel. Passenger/Right Corner Fill Panel Left and Right Bar Light L Brackets. (2) Plastic Plugs. License Plate Bracket

Driver/Left Mounting Bracket. Passenger/Right Mounting Bracket. Bolt Plates

ODY-04-1 or ODY-04-2 rev. B WATER TEMPERATURE GAUGE

Right Bar Light L Bracket Left Bar Light L Bracket. License Plate Bracket

Transcription:

PARTS LIST: 1 Bull Bar 2 12-1.75mm x 140mm Hex Head Bolts 1 Driver/Left Mounting Bracket 3 s 1 Passenger/Right Mounting Bracket 5 12m ID x 29mm OD x 3mm Flat Washers 1 12-1.75mm x 35mm Bolt Plate 3 s 4 8-1.25mm x 30mm Hex Head Bolts 4 8mm Lock Washers 4 8mm ID x 17mm OD x 1.5mm Flat Washers 2 Tube Spacers 84mm Passenger Side Mounting Bracket Driver Side Mounting Bracket Tube Spacers (2 pcs) 12-1.75mm x 35mm Bolt Plate Page 1 of 5

PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. 2. NOTE: It may be necessary to remove/relocate front license plate and license plate bracket. It is not required, but strongly recommended. If local/state law requires a license plate, license plate relocation kit is available. 3. From underside of vehicle, remove the two bolts holding the driver factory tow hook, then remove tow hook from vehicle. NOTE: This Bull Bar is not compatible with factory tow hooks, so you will not be reinstalling factory tow hooks back onto vehicle. 4. Loosely attach Mounting Brackets to Bull Bar using the included (4) 8mm x 30mm Hex Head Bolts, (4) 8mm Lock Washers, and (4) 8mm Flat Washers (Figure 1). Do not tighten at this time. NOTE: Refer to figure above for bracket configuration. 5. With help slide the Bull Bar assembly through tow hook cavities and place Mounting Brackets on the outer side of frame rails. 6. On the driver side you will be using the front tow hook hole that traverses the frame from side to side to attach Mounting Bracket to frame rail. Insert (1) Tube Spacers through the front of frame rail and align it with hole that traverses the frame rail (Figure 2). Secure the assembly with the included (1) 12mm x 140mm Hex Head Bolt, (1), (1), and (2) 12mm Flat Washers (Figure 3). 7. On the passenger side use the included (1) 12mm x 35mm Bolt Plate, (1), (1), and (1) 12mm Flat Washer to attach Mounting Bracket to rear tow hook hole. Repeat step 6 to attach Mounting Bracket to front tow hook hole (Figure 4). 8. Adjust Bull Bar properly, and then tighten all hardware at this time. NOTE: If you can t reach the Bull Bar Bolts (8mm hardware) from behind of bumper and through tow hook cavity, some cutting might be necessary to the tow hook cavity in order to tighten the Bull Bar Bolts. 9. Do periodic inspections to the installation to make sure that all hardware is secure and tight. To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap may be used also to clean the Bull Bar. For gloss black finishes: Mild soap may be used to clean the Bull Bar. Page 2 of 5

Fig 1 8mm x 30mm Hex Head Bolts 8mm Lock Washers 8mm Flat Washers Tube Spacer Fig 2 Page 3 of 5

Inner Side of Driver Frame Rail Shown Outer Side of Passenger Frame Rail Shown Fig 3 Fig 4 Factory Hardware or 12mm x 140mm Hex Head Bolt 12mm Flat Washers 12mm Bolt Plate 12mm Flat Washer Factory Hardware or 12mm x 140mm Hex Head Bolt 12mm Flat Washers Fig 5 Cleaning and Maintenance To protect your investment, wax this product after installing. Regular waxing is recommended to add a protective layer over the finish. Do not use any type of polish or wax that may contain abrasives that could damage the finish. For stainless steel: Aluminum polish may be used to polish small scratches and scuffs on the finish. Mild soap, window or glass cleaner may be used also. For gloss black finishes: Mild soap, window and glass cleaner may be used. LIMITED WARRANTY Smittybilt (The Company) warrants to the original purchaser of this product that should the product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within the warranty period of 5 years from the date of purchase, such defect(s) will be repaired or replaced (At the Company s option) without charge for parts or labor. To obtain repair or replacement within the terms of the warranty, the product is to be delivered with proof of warranty coverage ( e.g. dated bill of sale, Page 4 of 5

receipt), specification of defect, freight pre-paid with Returns Good Authorization Number from Smittybilt to place of purchase. Items returned to Smittybilt without a Returns Authorization Number will be refused and returned to sender at the senders expense. This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through altercation, improper installation, mishandling, misuse, neglect accident or acts of nature. THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THIS PRODUCT. This warranty is in lieu of all expressed warranties and liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHTH WITHIN A PERIOD OF 90 DAYS FROM DATE OF ORIGINAL PURCHASE.IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR IMPLIED,WHATSOEVER. No person or representative is authorized to assume for the company any liability other than expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, therefore above limitations may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights, which vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, herefore above limitations may not apply to you. This warranty gives the purchaser specific legal rights. The purchaser may have additional rights, which vary from state to state. Page 5 of 5