AMI Wheel Loader Attachments www.amiattachments.com
Top View GENERAL PURPOSE To fill quickly material needs to roll. AMI angles the bucket floor up slightly helping to lift material into the bucket. Smooth curves and open design makes the clean out easy without material packing into tight corners. HEAVY DUTY GENERAL PURPOSE BUCKET AMI s Heavy Duty General Purpose Bucket is made of 100% Hardox steel and is ideal for highly abrasive work in gravel pits or rock quarries. SPADE NOSE Make your point with the AMI Severe Duty Spade Nose Bucket. Built for handling rock in mining and quarry applications, the AMI Spade Nose loads easily with minimal wear. Reinforced plating on the bottom and Hardox wear plate all around make this bucket rock solid. Struck Bucket Heaped Basket FERTILIZER Designed for granular loads, the AMI Fertilizer Bucket s cubic yard volume is measured at struck level capacity instead of heaped. WOODCHIP Designed for light duty applications, the AMI Woodchip Bucket increases visibility using a metal grate across the top of the bucket. SNOW Get big volume and high visibility with the AMI extra wide Snow Bucket and Basket for efficient snow removal. General Purpose bucket sold separately shown for approximate scale comparison.
Auto-Lock SIDE DUMP Easily handle material on highway construction sites, trenches and roadways without obstructing traffic. The Side Dump pivots smoothly using a cushioning cylinder, slowing the movement at both ends of the stroke. For normal dumping, the auto-lock secures the non-pivot end, preventing the bucket from side pivoting during dumping and filling. ROCK SCREENING Get what you want and leave the rest with the AMI Rock Screening Bucket. Designed to effectively sift out rocks, brush or other large debris while leaving your fill where it belongs. Reduce your load waste while improving the productivity and performance of your machine. WASTE HANDLING With a bolt-on rubber edge that acts as a squeegee for wet, sloppy material, this bucket is perfect for the job of waste handling. Retracted EJECTOR BUCKET Extended Load and unload material faster with AMI s Ejector Bucket. Designed with two hydraulic cylinders that push the floor forward when the load is full, material releases quickly without the need to dump the bucket. HIGH DUMP The High Dump Bucket features a bottom pivot point allowing the operators more bucket clearance when emptying a load. HIGH DUMP WITH REMOVABLE GRAPPLE Get all the features of the High Dump Bucket with an optional Removable Grapple. 4-IN-1 Jack of all trades, the AMI 4-in-1 Bucket gives you the ultimate versatility, handling all the details on your job site. WASTE HANDLING PILING Stay on top of the pile with AMI s Waste Handling Piling Bucket. The bucket s high profile is designed for maximum capacity, allowing you to move large volumes of material easily and efficiently. COAL STOCKPILE The AMI Coal Stockpile Bucket is used to load hoppers, conveyors, trucks or train cars from loose coal stockpiles. AMI Coal Stockpile buckets are 15-20% larger in capacity than coal seam buckets.
ACCESS MAT Designed for high visibility and a mighty strength-to-weight ratio, grip on your load and keep it secure. Secure Handling Easy Positioning REMOVABLE General purpose Wheel Loader Bucket with a removable grapple. GARBAGE Large, semi-enclosed grapples contain and compress small, light material, making it easier to transfer and manage waste without spillage. SCRAP The cutout sidewall handles large loads of awkward, oversized material while the heavy-duty grapples clamp the load secure.
High Visibility 9 Side Shift Off Center Option 5 Tilt Shift Option PIPE & POLE Keep your load secure with the 2-stage hydraulic grapple, designed to pick the load and clamp down evenly on the entire row of pipe or poles for safe travel. MULTI-PURPOSE With replaceable bolt-on tines, this hydraulically controlled grapple is ideal for handling loose material like compost or manure. SAW LOG GRAPPLE Designed to handle large volumes of logs at the sawmill, AMI s Saw Log Grapple features a beveled tine profile for extra gripping power to withstand the toughest lumber mill applications. LOG GRAPPLE WITH LIVE TINE Maintain exceptional control of your load with AMI s Log Grapple with Live Tine. For log and lumber applications, operators can prevent logs from being damaged by adjusting the tines to the precise height prior to loading. FEEDLOT Handle bales and silage with the AMI Feedlot Grapple. Synchronized yet independent, the dual grapples hold an uneven load steady. LARGE DIAMETER PIPE With high visibility and tight radius, the by-pass grapple is able to clamp tightly around 6 diameter poles. The grapple hydraulic system has nitrate treated rods, cushioning cylinders and spherical bearings. RAKE Operators are now able to clear away scrub more efficiently by reducing the amount of soil collected along with the brush. PIPE & POLE - YARD The Pipe & Pole Yard Grapple s light weight design provides high visibility without sacrificing safety. Keep your load secure with the single parallel hydraulic grapple arm.
HYDRAULIC Hydraulically powered forks allow for quick adjustability of fork spacing, all from the seat of the cab. PALLET Add versatility to your loader with the AMI variable width Pallet Fork that locks the tines in place easily. SIDE SHIFT FORK RACK AMI s Side Shift Fork Rack easily shifts the entire rack from side to side for precise pallet handling. MANURE Designed for the precise handling of manure. LUMBER Flush with the extended backguards, the extra wide tines keep wide loads of piled lumber in place with strength and stability. LOG & LUMBER Hold your own with the powerful clamp that wraps around the load. Ideal for cut logs or milled lumber, this fork/grapple makes awkward material handling an easy task. QUARRY EXTRACTING FORK Working in the quarry s tough, abrasive environment, AMI s Quarry Extracting Fork is a rock solid performer. Capable of pulling out and transporting heavy rocks across the quarry, this fork improves productivity in the harshest conditions.
DOZER BLADES The AMI Dozer Blade s heavy-duty design provides 30-degree angle adjustment, 10-degree side-tilt and is available in widths from 12-16. Optional bolt-on width extensions, high volume endplates and height extensions are also available. LOADER SWEEPERS Ideal for snow removal on roads, parking lots, intersections and runways, the KingSpin Hydraulic Rotary Sweeper features double direct hydraulic drives, heavy-duty swivel caster wheels and 15 hydraulic angling in either direction. HYDRAULIC QUICK COUPLER Enclosed hydraulics protect your coupler from the elements, while greaseless bushings eliminate the need for daily maintenance. Greaseless Bushings Internal Hydraulics Shown with Access Panel Removed. HYDRAULIC BOOM POLE Extend and contract hydraulically using controls inside the cab for greater efficiency and safety. MECHANICAL BOOM POLE Add crane versatility to your loader with the Extendible Boom Pole from AMI.
1.800.556.9452 Phone: (519) 699-0387 Fax: (519) 699-0440 1270 Geddes St., Hawkesville, ON, Canada N0B 1X0 www.amiattachments.com Specifications are subject to change without notice. REVISED NOVEMBER 2018 Authorized Dealer EECI180819-S01-01 PRINTED IN CANADA AMI ATTACHMENTS INC.