atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Six Standard Seal Options to Handle a Variety of Fluids & Temperatures SME ertification vailable 38 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Specifications Materials Shell high strength alloy steel (7" and 9" bores comply with SME material specifications as standard) aps steel (7" and 9" bores comply with SME material specifications as standard) Pistons aluminum (4" thru 7"), ductile iron (9") artridge stainless steel Protector steel Piston Glide Rings PTFE Piston & End Seals various polymers Piston Seal ackups PTFE Piston ccumulators Series 5000 Series 5000 accumulators and gas bottles with 2 through 6 bores are supplied with a high pressure cored gas valve as standard. Models with 7 and 9 bores are supplied with a heavy duty (military) poppet-type gas valve cartridge (Mil. Spec. MS28889-2) as standard. with ore (2-6 ores) Military Style (MS) (7-9 ores) ctual ore Sizes & Maximum Flow Rates Nominal ctual ore Size Max. Recommended Flow* ore Size (in.) (in.) (mm) GPM LPM 2 2.025 51.44 100 380 3 3.000 76.20 220 834 4 4.030 102.4 397 1504 6 5.782 146.9 818 3096 7 7.000 177.8 1199 4538 9 9.000 228.6 1982 7502 *Note: ased on 120 in/sec maximum piston speed, port & fitting size will become limiting factors for most applications. Pressure Ratings Series 5000 piston accumulators are rated at minimum 4 to 1 design factors. For pressures over 5000 psi, consult the factory. Fluids Parker s piston accumulators are compatible with a wide variety of fluids. Standard accumulators (with nitrile seals) may be used with petroleum-based industrial oils or water-based flame resistant fluids. Optional seals compatible with most industrial fluids are available with temperature ranges from -65 F to 400 F (-53 to 204 ). Precharge Units are shipped with a 25 psi nitrogen precharge as standard. For other precharge pressures, specify at the time of order. Standard s The following ports are supplied as standard on all fluid ends and on the gas end of accumulators ordered for use with gas bottles: Standard s ore Metric Models Size Standard Models SPP (in) 2 SE #12 3/4 3 SE #12 3/4 4 SE #16 1 6 SE #16 1 7 2 ode 62 Flange 2 Metric ode 62 Flange 9 2 ode 62 Flange 2 Metric ode 62 Flange ertification #5 SE Thread Parker offers SME (Section VIII, iv. 1) ertification as a standard option on piston accumulators and auxiliary gas bottles as follows: ore SME ertification Size Req'd. vailable 2" no no 3" no no 4" no no 6 no option 7 yes option 9 yes option Special Options If your application requires a piston accumulator, gas bottle, or special option that falls outside of Parker s broad offering, consult your local distributor, Parker representative, or the factory with your specific requirements. Parker has the manufacturing and engineering expertise to design and build piston accumulators to your exacting requirements, from simple modifications of standard units to complete designs. Some example of Parker s past special designs include: Special and Stainless Steel Materials Piston Position and Velocity Sensors and Switches Special Seals Non-Standard apacities 1/2-20 UNF-2 uxiliary Gas ottles When space does not permit the installation of the required piston accumulator, a smaller accumulator may be used by connecting it to an auxiliary gas bottle(s) that can be located in a nearby spot where space is available. In some cases, a piston accumulator and gas bottle combination may be more economical, especially large capacity sizes. Piston travel, confined to the accumulator, must be calculated with ample margins to store the required fluid. 39 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 5000 PSI Piston ccumulators for Oil and Water Service Threaded ored Flanged Model No. 1 Fluid Gas - Oil Volume Volume S Tube E F G Weight Service (gal) (cu in) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 2N00051K 5 6.5 6.76 6.9 2N00 101K 10 11.5 8.31 7.9 2N00151K 15 16.5 2.63 9.78 1.06 12 1-1/16-12 3/4 8.8 2N00291K 1 Pint 29 30.5 14.19 11.5 2N00581K 1 Quart 58 59.5 23.19 17.2 3N00291K 1 Pint 29 34 10.25 23.0 3N00581K 1 Quart 58 63 14.34 29.0 3N00901K 1.5 Liter 90 95 4.00 18.94 1.13 12 1-1/16-12 3/4 3/8-12 2.25 0.56 36.0 3N01 161K 1/2 Gal. 116 121 22.56 42.0 3N0 1831K 3 Liter 183 188 32.06 57.0 4N00581K 1 Quart 58 68 12.06 46.0 4N01 161K 1/2 Gal. 116 126 16.62 52.0 4N02311K 1 Gal. 231 241 5.25 25.62 1.13 16 1-5/16-12 1 1/2-20 3.25 0.75 80.0 4N03471K 1-1/2 Gal. 347 357 34.75 104.0 4N05781K 2-1/2 Gal. 578 588 52.81 149.0 6N02311K 1 Gal. 231 266 19.18 144.0 6N03471K 1-1/2 Gal. 347 382 23.62 167.0 6N05781K 2-1/2 Gal. 578 613 32.43 212.0 6N09241K 4 Gal. 924 959 7.50 45.62 1.13 16 1-5/16-12 1 1/2-20 4.38 0.75 280.0 6N1 1551K 5 Gal. 1155 1190 54.43 325.0 6N17331K 7-1/2 Gal. 1733 1768 76.43 437.0 6N23 101K 10 Gal. 2310 2345 98.43 550.0 Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 40 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 5000 PSI Piston ccumulators for Use with Gas ottles Gas Threaded Flanged Fluid Gas (oth Ends) ccumulator Volume Volume S Tube E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00583KTETE 1 Quart 58 68 10.50 46.0 4N01 163KTETE 1/2 Gal. 116 126 15.06 52.0 4N02313KTETE 1 Gal. 231 241 5.25 24.49 16 1-5/16-12 1 1/2-20 3.25 0.75 80.0 4N03473KTETE 1-1/2 Gal. 347 357 33.62 104.0 4N05783KTETE 2-1/2 Gal. 578 588 51.68 149.0 6N02313KTETE 1 Gal. 231 266 18.05 144.0 6N03473KTETE 1-1/2 Gal. 347 382 22.49 167.0 6N05783KTETE 2-1/2 Gal. 578 613 31.30 212.0 6N09243KTETE 4 Gal. 924 959 7.50 44.49 16 1-5/16-12 1 1/2-20 4.38 0.75 280.0 6N1 1553KTETE 5 Gal. 1155 1190 53.30 325.0 6N17333KTETE 7-1/2 Gal. 1733 1768 75.30 437.0 6N23103KTETE 10 Gal. 2310 2345 97.30 550.0 5000 PSI uxiliary Gas ottles ored Threaded Flanged Model No. 1 Gas Volume Gas Nominal ctual S Tube E F G Weight ottle (gal) (cu in) (in) (in) (in) No. Size (in) Size (in) (in) (in) (lbs) 4N00581K 1 Quart 86 12.06 44.3 4N01161K 1/2 Gal. 144 16.62 50.3 4N02311K 1 Gal. 259 5.25 25.62 1.13 16 1-5/16-12 1 1/2-20 3.25 0.75 78.3 4N03471K 1-1/2 Gal. 375 34.75 102.3 4N05781K 2-1/2 Gal. 606 52.81 147.3 6N02311K 1 Gal. 319 19.18 138.5 6N03471K 1-1/2 Gal. 435 23.62 161.5 6N05781K 2-1/2 Gal. 666 32.43 206.5 6N09421K 4 Gal. 1012 7.50 45.62 1.13 16 1-5/16-12 1 1/2-20 4.38 0.75 274.5 6N11551K 5 Gal. 1243 54.43 319.5 6N17331K 7-1/2 Gal. 1821 76.43 431.5 6N23101K 10 Gal. 2398 98.43 544.5 41 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 345 ar Metric Piston ccumulators for Oil and Water Service Threaded ored Flanged Model No. 1 Fluid - Gas Volume Oil Volume SPP/G SE E F G Weight Service (Liters) (cu in) (Liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 2N00052K 0.08 5 0.11 172 3.1 2N00 102K 0.16 10 0.19 211 3.5 2N00152K 0.25 15 0.24 67 248 27 3/4 3.9 2N00292K 0.48 29 0.50 360 5.1 2N00582K 0.95 58 0.98 589 7.6 3N00292K 0.48 29 0.56 260 10.2 3N00582K 0.95 58 1.03 364 12.9 3N00902K 1.47 90 1.56 102 481 29 3/4 M10 60 15 16.0 3N01 162K 1.90 116 1.98 573 18.7 3N01832K 3.00 183 3.08 814 25.3 4N00582K 0.95 58 1.11 306 20.4 4N01 162K 1.90 116 2.06 422 23.1 4N02312K 3.79 231 3.95 134 651 29 1 M12 82 18 35.5 4N03472K 5.69 347 5.85 883 46.2 4N05782K 9.47 578 9.64 1341 66.2 6N02312K 3.79 231 4.36 487 64.0 6N03472K 5.69 347 6.26 600 74.2 6N05782K 9.47 578 10.00 824 94.2 6N09242K 15.10 924 15.70 191 1159 29 1 M12 110 18 124.4 6N1 1552K 18.90 1155 19.50 1383 144.4 6N1 7332K 28.40 1733 29.00 1941 194.2 6N23 102K 37.90 2310 38.40 2500 244.4 Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 42 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Small ore 345 ar Metric Piston ccumulators for Use with Gas ottles Gas Threaded Flanged Fluid - Gas ccumulator Volume Volume SPP/G SE E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582KRR 0.95 58 1.11 335 20.4 4N01 162KRR 1.90 116 2.06 451 23.1 4N02312KRR 3.79 231 3.95 134 680 1 M12 82 18 35.5 4N03472KRR 5.69 347 5.85 912 46.2 4N05782KRR 9.47 578 9.64 1370 66.2 6N02312KRR 3.79 231 4.36 516 64.0 6N03472KRR 5.69 347 6.26 629 74.2 6N05782KRR 9.47 578 10.00 853 94.2 6N09242KRR 15.10 924 15.70 191 1188 1 M12 110 18 124.4 6N1 1552KRR 18.90 1155 19.50 1412 144.4 6N 17332KRR 28.40 1733 29.00 1970 194.2 6N23 102KRR 37.90 2310 38.40 2529 244.4 345 ar Metric uxiliary Gas ottles ored Threaded Flanged Model No. Gas Volume - Gas Nominal ctual SPP/G SE E F G Weight ottle (liters) (liters) (mm) (mm) (mm) (in) Flange (mm) (mm) (mm) (Kg) 4N00582K 0.95 1.11 306 19.7 4N01 162K 1.90 2.06 422 22.4 4N02312K 3.79 3.95 134 651 29 1 M12 82 18 34.8 4N03472K 5.69 5.85 883 45.5 4N05782K 9.47 9.64 1341 65.5 6N02312K 3.79 4.36 487 63.3 6N03472K 5.69 6.26 600 73.5 6N05782K 9.47 10.00 824 93.5 6N09242K 15.10 15.70 191 1159 29 1 M12 110 18 123.7 6N1 1552K 18.90 19.50 1383 143.7 6N 17332K 28.40 29.00 1941 193.7 6N23 102K 37.90 38.40 2500 243.7 43 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 5000 PSI Piston ccumulators for Oil and Water Service MS28889-2 Flanged Fluid Gas Volume Volume E F G Weight Model No. 1 (gal) (cu in) (cu in) (in) (in) (in) (in) (in) (in) (lbs) 7K1 1551K 5 Gal. 1155 1190 42.50 383 7K17331K 7-1/2 Gal. 1733 1768 9.098 57.50 2" SE ode 62 491 7K23101K 10 Gal. 2310 2345 ±0.060 72.50 1.63 Flange 2 5/8-18 5.75 0.94 599 7K34651K 15 Gal. 3465 3520 102.50 815 9K23101K 10 Gal. 2310 2400 50.75 626 9K34651K 15 Gal. 3465 3555 68.94 791 9K46201K 20 Gal. 4620 4710 11.781 87.12 1.63 2" SE ode 62 3/4-16 7.00 1.13 956 9K57751K 25 Gal. 5775 5865 ±0.090 105.25 Flange 2 1120 9K69301K 30 Gal. 6930 7020 123.43 1285 The Minimum esign Metal Temperature (MMT) for SME certified piston accumulators presented in this section is 20 F (-7 ). Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 44 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 5000 PSI Piston ccumulators for Use with Gas ottles Flanged Fluid Gas ccumulator Volume Volume E F G Weight Model No. (gal) (cu in) (cu in) (in) (in) s (in) (in) (in) (lbs) 7K11553KPQPQ 5 Gal. 1155 1190 40.87 383 7K17333KPQPQ 7-1/2 Gal. 1733 1768 9.098 55.87 491 7K23103KPQPQ 10 Gal. 2310 2345 ±0.060 70.87 2 SE ode 62 5/8-18 5.75 0.94 599 7K34653KPQPQ 15 Gal. 3465 3520 100.87 815 9K23103KPQPQ 10 Gal. 2310 2400 49.12 626 9K34653KPQPQ 15 Gal. 3465 3555 67.31 791 9K46203KPQPQ 20 Gal. 4620 4710 11.781 85.49 2 SE ode 62 3/4-16 7.00 1.13 956 9K57753KPQPQ 25 Gal. 5775 5865 ±0.090 103.62 1120 9K69303KPQPQ 30 Gal. 6930 7020 121.80 1285 5000 PSI uxiliary Gas ottles MS28889-2 Flanged Model No. 1 Gas Volume Gas Nominal ctual E F G Weight ottle (gal) (cu in) (in) (in) (in) s (in) (in) (in) (lbs) 7K11551K 5 Gal. 1155 42.50 374 7K17331K 7-1/2 Gal. 1733 9.098 57.50 482 7K23101K 10 Gal. 2310 ±0.060 72.50 1.63 2 SE ode 62 5/8-18 5.75 0.94 590 7K34651K 15 Gal. 3465 102.50 806 9K23101K 10 Gal. 2310 50.75 575 9K34651K 15 Gal. 3465 68.94 740 9K46201K 20 Gal. 4620 11.781 87.12 1.63 2 SE ode 62 3/4-16 7.00 1.13 905 9K57751K 25 Gal. 5775 ±0.090 105.25 1069 9K69301K 30 Gal. 6930 123.43 1234 45 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 345 ar Metric Piston ccumulators for Oil and Water Service MS28889-2 Flanged Fluid Gas Volume Volume E F G Weight Model No. 1 (Liters) (cu in) (liters) (mm) (mm) (mm) (mm) (mm) (mm) (kg) 7K1 1552K 18.90 1155 19.50 1080 174 7K17332K 28.40 1733 29.00 231.1 1461 2" Metric 233 7K23102K 37.90 2310 38.40 ±1.52 1842 41 SE ode 62 Flange 2 M16 146 24 271 7K34652K 56.85 3465 57.75 2604 397 9K23 102K 37.90 2310 39.37 1289 284 9K34652K 56.85 3465 58.33 1751 2 Metric 359 9K46202K 75.80 4620 77.27 299.2 2213 41 SE ode 62 M19 178 29 433 9K57752K 94.75 5775 96.23 ±2.29 2673 Flange 2 508 9K69302K 113.70 6930 115.18 3135 583 Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 3) SME certification available. 46 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Models, apacities & imensions Piston ccumulators Series 5000 Large ore 345 ar Metric Piston ccumulators for Use with Gas ottles Flanged Fluid Gas ccumulator Volume Volume E F G Weight Model No. (Liters) (cu in) (Liters) (mm) (mm) s (mm) (mm) (mm) (kg) 7K11552KMQMQ 18.90 1155 19.50 1039 174 7K17332KMQMQ 28.40 1733 29.00 231.1 1420 2 Metric 223 7K23102KMQMQ 37.90 2310 38.40 ±1.52 1801 SE ode 62 Flange 2 M16 146 24 271 7K34652KMQMQ 56.85 3465 57.75 2563 397 9K23102KMQMQ 37.90 2310 39.37 1248 284 9K34652KMQMQ 56.85 3465 58.33 1710 2 Metric 359 9K46202KMQMQ 75.80 4620 77.27 299.2 2172 SE ode 62 M19 178 29 433 9K57752KMQMQ 94.75 5775 96.23 ±2.29 2632 Flange 2 508 9K69302KMQMQ 113.70 6930 115.18 3098 583 345 ar Metric uxiliary Gas ottles MS28889-2 Flanged Model No. 1 Gas Volume Gas Nominal ctual E F G Weight ottle (Liters) (Liters) (mm) (mm) (mm) s (mm) (mm) (mm) (kg) 7K11552K 18.90 19.50 1080 169 7K17332K 28.40 29.00 231.1 1461 2 Metric 219 7K23102K 37.90 38.40 ±1.52 1842 41 SE ode 62 Flange 2 M16 146 24 268 7K34652K 56.85 57.75 2604 366 9K23102K 37.90 39.37 1289 261 9K34652K 56.85 58.33 1751 2 Metric 336 9K46202K 75.80 77.27 299.2 2213 41 SE ode 62 M19 178 29 411 9K57752K 94.75 96.23 ±2.29 2673 Flange 2 485 9K69302K 113.70 115.18 3135 560 Notes: 1) For Water Service add W after construction code, see How to Order. 2) See page 48 for complete listing of port options. 47 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Options Piston ccumulators Series 5000 Optional s The following ports are available as options on all piston accumulators. SE Straight Thd. ode 62 Flange NPT SPP ISO 6149-1 Min. ode Min. Min. Min. Min. Size ode ore Size Inch Metric ore Size ode ore Size ode ore Size ode ore #5 T 2" 1" PG MG 4" 3/8" UT 2" 3/8" R 2" M14 Y 2" #6 T 2" 1¼" PH MH 4" 1/2" UU 2" 1/2" R 2" M18 Y 2" #8 T 2" 1½" PP MV 6" 3/4" UV 2" 3/4" R 2" M22 Y 2" #10 TI 2" 2" PQ MQ 6" 1" UW 3" 1" R 3" M27 Y 2" #12 T 2" 2½" PR 7" 1¼" UX 3" 1¼" RE 3" M33 YE 3" #16 TE 3" 3 PS 9 1½" UY 4" 1½" RF 4" M42 YF 3" 2 UZ 4 2 RG 4 Notes: 1) 1" thru 2" flanges are to standard SE ode 62 dimensions, 2-1/2" to Socket Weld Flange dapter Pattern, dimensions are shown below. Metric pattern supplied on 345 ar Metric units unless otherwise specified. 2) SPT and Metric ports available, consult factory. SE 4-olt Flange imensions ode 62 (ISO 6162) (thru 2" diameter) 6000 PSI (410 ar) Flange Size SE Flange imensions (in.) Metric SE Flange imensions (mm) in mm F G F G 1½" 38 5/8-11 1.438 3.125 1½ 1.375 M16 36.5 79.4 38 34.9 2" 50 3/4-10 1.750 3.812 2 1.500 M20 44.5 96.8 50 38.1 2½" 7/8-9 2.312 4.875 2½ 1.625 F (4 places) x G Min. epth Optional Military Style (M) 2 thru 6 ore Sizes heavy duty (military style) poppet-type gas valve cartridge (Mil. Spec. MS28889-2) is available as an option (M) specify when ordering. Note: This valve is standard on 7 and 9 bore sizes. Military Style (MS) 1/2-20 UNF-2 Safety Fuse Options (F) Safety Fuses are used as a safety device on accumulators and gas bottles to prevent over-pressurization of gas due to external heat or hydraulic pressure (set at 140% of maximum system pressure to avoid rupture disk fatigue and premature failure). The rupture disks are calibrated to rupture at a pre-determined pressure. Safety fuses are available on most sizes of piston accumulators. Safety fuses can be installed on all piston accumulators by using a fuse adapter. 4" bore units and above can be equipped with a fuse port machined in the gas cap by specifying the Safety Fuse Option (F) at the time of order in the model code, see How to Order. The safety fuse assembly and/or fuse adapter must be ordered separately. escription Part Number Safety Fuse ssembly 1 086471xxxx Replacement Rupture isks 756003xxxx Fuse dapter 1468970002 1) ssembly includes housing and rupture disk, xxxx = pressure setting in 100 psi increments, i.e., for an assembly with a 2000 PSI setting, order P/N 0864712000. Fuse Fuse dapter #8 SE Straight Thread #5 SE Straight Thread #5 SE Straight Thread 48 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Page Options & Parts Piston ccumulators Series 5000 Water Service Option (W) Piston accumulators are available for use with water as the fluid media. Modifications include electroless nickel plating all surfaces and metal parts. arboxilated Nitrile (J) piston seals should be specified for water service. onsult factory for details. Seal Material **Recommended Maximum Seal Operating Temperature with General pplication ode Polymer Temperature Range Reduced Life and ompatibility* K una -20 F to 165 F 200 F Parker's Standard ompound ompatible Nitrile -29 to 74 93 with most mineral oil-based fluids E Fluorocarbon -10 F to 250 F 400 F ompatible with most mineral oil-based fluids at Elastomer -23 to 121 204 higher temperatures and some exotic fluids Ethylene -40 F to 250 F 300 F ompatible with most phosphate ester fluids Propylene -40 to 121 149 and some synthetic fluids H Hydrogenated -45 F to 325 F 350 F ompatible with most oil-based and biodegradable fluids, Nitrile -43 to 162 177 maintains sealing effectiveness at low temperatures J arboxilated -20 F to 165 F 200 F ompatible with most mineral oil-based fluids Nitrile -29 to 74 93 with added internal lubricity for water based fluids Q Low Temp. -45 F to 160 F 200 F ompatible with most mineral oil-based fluids and Nitrile -43 to 71 93 maintains sealing effectiveness at low temperatures * Note: onsult local distributor or factory for fluid compatibility information. Temperature ranges may vary depending upon fluid used in hydraulic system. ** The temperature listed indicates the operating temperature range of the seals, not the accumulator. For the Minimum esign Metal Temperature (MMT) of SME certified accumulators, refer to page 44. Parts List ccumulators 4 2 1 3 9 8 9 Item Part escription 1 ody 2 ap 3 Gas ap 4 Piston 5 V-O-Ring 5 V-O-Ring ack-up Washers 6 PTFE Ring (Piston) 7 O-Ring 7 O-Ring ack-up Washer 8 8 O-Ring 9 Guard 9 Screw 8 5 5 6 7 7 5000 PSI Seal Kit Numbers (Includes items 5, 5, 6, 7, 7, 8) Material ore Size 2" 3 4" 6" 7" 9" una-nitrile (Std.) RK0200K000 RK0300K000 RK0400K000 RK0600K000 RK0700K000 RK0900K000 Fluorocarbon RK0200E000 RK0300E000 RK0400E000 RK0600E000 RK0700E000 RK0900E000 EPR RK0200000 RK0300000 RK0400000 RK0600000 RK0700000 RK0900000 Hydrogenated Nitrile RK0200H000 RK0300H000 RK0400H000 RK0600H000 RK0700H000 onsult Factory arboxylated Nitrile RK0200J000 RK0300J000 RK0400J000 RK0600J000 RK0700J000 RK0900J000 Low Temp Nitrile RK0200Q000 RK0300Q000 RK0400Q000 RK0600Q000 RK0700Q000 RK0900Q000 49 Parker Hannifin orporation ccumulator ivision
atalog 1630-8/US Piston ccumulators Page Ordering Information Series 5000 How to Order Series 5000 Piston ccumulators Piston accumulators and gas bottles can be specified by using the symbols in the chart below to develop a model number. Select only those symbols that represent the features desired, and place them in the sequence indicated by the example at the top of the chart. Nominal ore Type of esign esign Seal Hyd. Gas Series Size onstruction Options apacity Pressure Number ompound Modification Modification 7 K 2310 1 K Series ccumulator Gas ottle Nominal ore Size 2 2 inches 3 3 inches 4 4 inches 6 6 inches 7 7 inches 9 9 inches N K L Type of onstruction Threaded both ends non-sme mat l standard on 2, 3, 4, 6 Threaded both ends.s.m.e. mat l standard on 7 & up Same as K with.s.m.e. approval stamp 7 & up. vailable as special on smaller sizes Options lank Standard Gas ap W Water Service F SE Fuse * G SE Fuse * Water Service M MS L MS Water Service P Fuse and MS Valve R Fuse and MS Valve Water Service * Safety fuse assembly not included. Order fuse assembly separately. ore Size/apacity 0005 5 cu. in. 0010 10 cu. in. 0015 2 15 cu. in. 0029 29 cu. in. 0058 58 cu. in. 0029 29 cu. in. 0058 58 cu. in. 0090 3 90 cu. in. 0116 116 cu. in. 0183 183 cu. in. 0058 58 cu. in. 0116 116 cu. in. 0231 4 1 gal. 0347 1½ gal. 0578 2½ gal. 0231 1 gal. 0347 1½ gal. 0578 2½ gal. 0924 6 4 gal. 1155 5 gal. 1733 7½ gal. 2310 10 gal. 1155 5 gal. 1733 7½ gal. 2310 7 10 gal. 3465 15 gal. 2310 10 gal. 3465 15 gal. 4620 9 20 gal. 5775 25 gal. 6930 30 gal. onsult factory for other available sizes. esign Pressure 5000 PSI esign Number 1 Standard s* 2 Metric Mounting Holes & Hyd. (SPP/Metric Flange Standard*) Specify Special s 3 Special (Hyd. or Gas, See Table) ### Special esign and Gas Modifications esignated by 2 igits 1st 2nd Min. igit Style igit escription ore Size lank Std. lank Std. Straight Thread s T SE SE #5 (1/2-20) 2 SE #6 (9/16-18) 2 SE #8 (3/4-16) 2 SE #12 (1 1/16-12) 2 E SE #16 (1 5/16-12) 3 F SE #20 (1 5/8-12) 3 G SE #24 (1 7/8-12) 4 H SE #32 (2 1/2-12) 7 I SE #10 (7/8-14) 2 6000 PSI (ode 62) Min. ore P Flange G 1 4 H 1 1/4 4 P 1 1/2 6 M Metric Q 2 6 Flange R* 2 1/2 7 per S* 3 9 ISO 6162 T 3/8 2 U NPTF U 1/2 2 (Not V 3/4 2 Recommended) W 1 2 X 1 1/4 2 Y 1 1/2 4 Z 2 4 SPP/SPT Metric/ISO R SPP 3/8-19 M14 x 1.5 Parallel 1/2-14 M18 x 1.5 SPT 3/4-14 M22 x 1.5 Taper 1-11 M27 x 2 G Metric E 1 1/4-11 E M33 x 2 Y ISO F 1 1/2-11 F M42 x 2 6149-1 G 2-11 G M48 x 2 Example of Special ccumulator 4 N 0231 3 K T U V Non-std. *Standard s vailable (See Modifications Table if Using Other Than Standard s Shown elow) ore Standard Metric (SPP) Size s s 2 SE #12 3/4 3 SE #12 3/4 4 SE #16 1 6 SE #16 1 7 2 ode 62 Flange 2 ode 62 Flange 9 2 ode 62 Flange 2 ode 62 Flange * For socket weld flange. Not available with metric flange. SE #8 Hyd. Seal ompound (See atalog for Temperature Settings) K una Nitrile (Std) E Fluoroelastomer EPR H Hydrogenated Nitrile J HWF Q S NPT 3/4 Gas Low Temp. Special (to be specified) 50 Parker Hannifin orporation ccumulator ivision