ECTIN DIRECTRY PECIAL APE IZE AND PERFRMANCE UMMARY GLAZING PERFRMANCE CMBINATIN GRILLE PRFILE AND PATTERN CUTM APE AND IZE DETAILED PRDUCT DECRIPTIN CR ECTIN The information published in this document is believed to be accurate at the time of publication. owever, because we are constantly working to improve our products, specifications are subject to change without notice. Consult your local Pella representative for up-to-date product information. General Notes: pecifications subject to change without notice. Go to www.pellaadm.com for most current technical data. For complete CI Format pecifications see www.pellaadm.com. F--1
BRAND UMMARY PECIAL APE Pella pecial hape Windows have the innovations you demand. The frame and glass stop are made of a fiberglass-resin composite. Pella pecial hape windows are prefinished in White, Tan, Brown, Black, and Morning ky Gray to match Pella Impervia products. The fiberglass resin has a solid acrylic-resin capstock finish extruded over it. The finish provides flexible color options and excellent UV resistance for durability and resistance to fading and chalking. Most Pella pecial hape windows with Low-E insulating glass with argon meet or exceed ENERGY TAR guidelines in all 50 states. BLCK FRAME The block frame is our most versatile frame. Units can be installed in masonry openings using installation clips or in wood frame openings using optional fins. Units can also be field joined together. F--2
PECIAL APE PRDUCT ELECTIN GUIDE ize and Performance Data ound Performance IZE alf and Quarter Circle Arch ead and Partial Arch ead pringline Trapezoid Pentagon and Triangle Isosceles Triangle PERFRMANCE Meets or Exceeds AAMA / WDMA Ratings Air Infiltration (cfm / ft 2 of frame @ 1.57 psf wind pressure) Water Resistance Design Pressure TER PERFRMANCE CRITERIA BLCK FRAME FW-CW30 allmark Certified 0.05 4.5 psf 30 psf Forced Entry Resistance Level (Minimum ecurity Grade) 1 40 UND TRANMIIN CLA AND UTDR-INDR TRANMIIN CLA Glazing ystem Product Frame ize Tested2 verall Glazing Thickness Exterior Glass Thickness Interior Glass Thickness TC Rating ITC Rating PECIAL APE 47-1/2" x 47-1/2" 1" 2.5mm 2.5mm 27 21 (1) The higher the level, the greater the product's ability to resist forced entry. ATM E 1425 defines standard sizes for acoustical testing. Ratings achieved at that size are representative of all sizes of the same configuration. F--3
PRDUCT ELECTIN GUIDE Features and ptions PECIAL APE BLCK FRAME GLAZING Glazing Type Dual-pane Insulating Glass Insulated Glass ptions / Low-E Types Clear Insulating Glass (no Low-E coating) Advanced Low-E Insulating Glass undefense Low-E Insulating Glass AdvancedComfort Low-E Insulating Glass Naturalun Low-E Insulating Glass Additional Glass ptions Annealed Glass Tempered Glass Noise reduction glass (3/5mm, 4/6mm combinations) Noise reduction laminated glass (non-impact) Tinted glass (Bronze, Gray, Green) Advanced Low-E bscure Glass 1 Gas Fill / igh Altitude Argon igh Altitude igh Altitude with Argon EXTERIR / INTERIR Prefinished White Prefinished Tan, Brown, Black, or Morning ky Gray Prefinished Dual-color (All exterior colors available with White interior) GRILLE Grilles-Between-the-Glass Traditional, tarburst 2, unburst 2 = tandard; = ptional (1) Contact your local Pella sales representative for current offering. (2) elect shapes only. Rev. 06/29/2018 F--4
GLAZING PERFRMANCE TTAL UNIT PECIAL APE Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values 1 GC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone FIXED UNIT N NC C 1 2 3 1" Clear IG PEL-N-127-02470-00003 3 3 air 0.46 0.69 0.72 46 with grilles-between-the-glass PEL-N-127-02470-00004 0.46 0.62 0.65 46 1" Clear IG PEL-N-127-02475-00001 5 5 air 0.45 0.66 0.71 46 with grilles-between-the-glass PEL-N-127-02475-00002 0.45 0.59 0.64 46 1" Advanced Low-E IG PEL-N-127-02412-00003 3 3 argon 0.27 0.33 0.62 60 25 with grilles-between-the-glass PEL-N-127-02412-00004 0.27 0.30 0.55 60 24 1" Advanced Low-E IG PEL-N-127-02417-00001 5 5 argon 0.27 0.32 0.61 61 25 with grilles-between-the-glass PEL-N-127-02417-00002 0.27 0.29 0.54 61 23 1" undefense IG PEL-N-127-02426-00003 3 3 argon 0.27 0.24 0.57 60 20 with grilles-between-the-glass PEL-N-127-02426-00004 0.27 0.22 0.51 60 19 1" undefense IG PEL-N-127-02431-00001 5 5 argon 0.26 0.24 0.56 62 21 with grilles-between-the-glass PEL-N-127-02431-00002 0.26 0.22 0.50 62 20 1" AdvancedComfort Low-E IG PEL-N-127-02438-00003 3 3 argon 0.22 0.32 0.60 50 30 with grilles-between-the-glass PEL-N-127-02438-00004 0.22 0.29 0.54 50 28 1" AdvancedComfort Low-E IG PEL-N-127-02442-00001 5 5 argon 0.22 0.31 0.59 49 30 with grilles-between-the-glass PEL-N-127-02442-00002 0.22 0.28 0.53 49 29 1" Naturalun Low-E IG PEL-N-127-02400-00003 3 3 argon 0.28 0.61 0.70 60 40 with grilles-between-the-glass PEL-N-127-02400-00004 0.28 0.55 0.63 60 37 1" Naturalun Low-E IG PEL-N-127-02404-00001 5 5 argon 0.28 0.58 0.69 61 38 with grilles-between-the-glass PEL-N-127-02404-00002 0.28 0.53 0.62 61 36 FIXED UNIT WIT FAM INULATIN 1" Advanced Low-E IG PEL-N-127-02501-00003 3 3 argon 0.26 0.33 0.62 61 26 with grilles-between-the-glass PEL-N-127-02501-00004 0.26 0.29 0.55 61 24 1" Advanced Low-E IG PEL-N-127-02506-00001 5 5 argon 0.26 0.32 0.61 62 26 with grilles-between-the-glass PEL-N-127-02506-00002 0.26 0.29 0.54 62 24 1" undefense IG PEL-N-127-02515-00003 3 3 argon 0.26 0.24 0.57 61 21 with grilles-between-the-glass PEL-N-127-02515-00004 0.26 0.22 0.51 61 20 1" undefense IG PEL-N-127-02520-00001 5 5 argon 0.25 0.24 0.56 63 23 with grilles-between-the-glass PEL-N-127-02520-00002 0.25 0.22 0.50 63 21 1" AdvancedComfort Low-E IG PEL-N-127-02527-00003 3 3 argon 0.22 0.32 0.60 50 31 with grilles-between-the-glass PEL-N-127-02527-00004 0.22 0.29 0.54 50 29 1" AdvancedComfort Low-E IG PEL-N-127-02531-00001 5 5 argon 0.21 0.31 0.59 49 32 with grilles-between-the-glass PEL-N-127-02531-00002 0.21 0.28 0.53 49 30 1" Naturalun Low-E IG PEL-N-127-02489-00003 3 3 argon 0.27 0.61 0.70 60 41 with grilles-between-the-glass PEL-N-127-02489-00004 0.27 0.55 0.63 60 38 1" Naturalun Low-E IG PEL-N-127-02493-00001 5 5 argon 0.27 0.58 0.69 62 40 with grilles-between-the-glass PEL-N-127-02493-00002 0.27 0.53 0.62 62 37 R-Value = 1/U-Factor GC = olar eat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. For center-glass values, see the Product Performance section. ee the Product Performance section for more detailed information or visit www.energystar.gov for Energy tar guidelines. Rev. 03/20/2018 F--5
GLAZING PERFRMANCE TTAL UNIT pecial hapes PECIAL APE Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values 1 GC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone IG ALTITUDE GLAZING N NC C 1 2 3 1" (A) Advanced Low-E IG PEL-N-127-02405-00003 3 3 air 0.31 0.33 0.62 59 with grilles-between-the-glass PEL-N-127-02405-00004 0.31 0.30 0.55 59 1" (A) Advanced Low-E IG PEL-N-127-02410-00001 5 5 air 0.31 0.32 0.61 58 with grilles-between-the-glass PEL-N-127-02410-00002 0.31 0.29 0.54 58 1" (A) undefense IG PEL-N-127-02419-00003 3 3 air 0.31 0.24 0.57 59 with grilles-between-the-glass PEL-N-127-02419-00004 0.31 0.22 0.51 59 1" (A) undefense IG PEL-N-127-02424-00001 5 5 air 0.30 0.24 0.56 58 with grilles-between-the-glass PEL-N-127-02424-00002 0.30 0.22 0.50 58 1" (A) AdvancedComfort Low-E IG PEL-N-127-02433-00003 3 3 air 0.25 0.32 0.60 46 27 with grilles-between-the-glass PEL-N-127-02433-00004 0.25 0.29 0.54 46 25 1" (A) AdvancedComfort Low-E IG PEL-N-127-02437-00001 5 5 air 0.24 0.31 0.59 45 28 with grilles-between-the-glass PEL-N-127-02437-00002 0.24 0.28 0.53 45 26 1" (A) Naturalun Low-E IG PEL-N-127-02395-00003 3 3 air 0.32 0.61 0.70 58 35 with grilles-between-the-glass PEL-N-127-02395-00004 0.32 0.55 0.63 58 32 1" (A) Naturalun Low-E IG PEL-N-127-02399-00001 5 5 air 0.31 0.58 0.69 57 35 with grilles-between-the-glass PEL-N-127-02399-00002 0.31 0.53 0.62 57 32 IG ALTITUDE GLAZING WIT FAM INULATIN 1" (A) Advanced Low-E IG PEL-N-127-02494-00003 3 3 air 0.31 0.33 0.62 59 with grilles-between-the-glass PEL-N-127-02494-00004 0.31 0.30 0.55 59 1" (A) Advanced Low-E IG PEL-N-127-02499-00001 5 5 air 0.30 0.32 0.61 58 with grilles-between-the-glass PEL-N-127-02499-00002 0.30 0.29 0.54 58 1" (A) undefense IG PEL-N-127-02508-00003 3 3 air 0.30 0.24 0.57 60 with grilles-between-the-glass PEL-N-127-02508-00004 0.30 0.22 0.51 60 1" (A) undefense IG PEL-N-127-02513-00001 5 5 air 0.29 0.24 0.56 59 with grilles-between-the-glass PEL-N-127-02513-00002 0.29 0.22 0.50 59 1" (A) AdvancedComfort Low-E IG PEL-N-127-02522-00003 3 3 air 0.24 0.32 0.60 47 28 with grilles-between-the-glass PEL-N-127-02522-00004 0.24 0.29 0.54 47 27 1" (A) AdvancedComfort Low-E IG PEL-N-127-02526-00001 5 5 air 0.24 0.31 0.59 46 28 with grilles-between-the-glass PEL-N-127-02526-00002 0.24 0.28 0.53 46 26 1" (A) Naturalun Low-E IG PEL-N-127-02484-00003 3 3 air 0.31 0.61 0.70 59 36 with grilles-between-the-glass PEL-N-127-02484-00004 0.31 0.55 0.63 59 33 1" (A) Naturalun Low-E IG PEL-N-127-02488-00001 5 5 air 0.31 0.58 0.69 58 35 with grilles-between-the-glass PEL-N-127-02488-00002 0.31 0.52 0.62 58 31 R-Value = 1/U-Factor GC = olar eat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. For center-glass values, see the Product Performance section. ee the Product Performance section for more detailed information or visit www.energystar.gov for Energy tar guidelines. Rev. 03/20/2018 F--6
GLAZING PERFRMANCE - TTAL UNIT 3mm / 5mm Glass PECIAL APE Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values 1 GC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone FIXED N NC C 1 2 3 1" Clear IG PEL-N-127-02382-00001 3 5 air 0.46 0.68 0.72 46 with grilles-between-the-glass PEL-N-127-02382-00002 0.46 0.61 0.65 46 1" Advanced Low-E IG PEL-N-127-02413-00001 3 5 argon 0.27 0.32 0.61 62 25 with grilles-between-the-glass PEL-N-127-02413-00002 0.27 0.29 0.55 62 23 1" undefense IG PEL-N-127-02427-00001 3 5 argon 0.26 0.24 0.57 62 21 with grilles-between-the-glass PEL-N-127-02427-00002 0.26 0.22 0.51 62 20 1" AdvancedComfort Low-E IG PEL-N-127-02439-00001 3 5 argon 0.22 0.32 0.60 49 31 with grilles-between-the-glass PEL-N-127-02439-00002 0.22 0.29 0.54 49 29 1" Naturalun Low-E IG PEL-N-127-02401-00001 3 5 argon 0.28 0.61 0.69 61 40 with grilles-between-the-glass PEL-N-127-02401-00002 0.28 0.55 0.62 61 37 FIXED WIT FAM INULATIN 1" Advanced Low-E IG PEL-N-127-02502-00001 3 5 argon 0.26 0.32 0.61 63 26 with grilles-between-the-glass PEL-N-127-02502-00002 0.26 0.29 0.55 63 24 1" undefense IG PEL-N-127-02516-00001 3 5 argon 0.26 0.24 0.57 63 21 with grilles-between-the-glass PEL-N-127-02516-00002 0.26 0.22 0.51 63 20 1" AdvancedComfort Low-E IG PEL-N-127-02528-00001 3 5 argon 0.21 0.32 0.60 50 32 with grilles-between-the-glass PEL-N-127-02528-00002 0.21 0.29 0.54 50 30 1" Naturalun Low-E IG PEL-N-127-02490-00001 3 5 argon 0.27 0.61 0.69 62 41 with grilles-between-the-glass PEL-N-127-02490-00002 0.27 0.55 0.62 62 38 IG ALTITUDE GLAZING 1" (A) Advanced Low-E IG PEL-N-127-02406-00001 3 5 air 0.31 0.33 0.61 58 with grilles-between-the-glass PEL-N-127-02406-00002 0.31 0.30 0.55 58 1" (A) undefense IG PEL-N-127-02420-00001 3 5 air 0.31 0.24 0.57 58 with grilles-between-the-glass PEL-N-127-02420-00002 0.31 0.22 0.51 58 1" (A) AdvancedComfort Low-E IG PEL-N-127-02434-00001 3 5 air 0.25 0.32 0.60 46 27 with grilles-between-the-glass PEL-N-127-02434-00002 0.25 0.29 0.54 46 25 1" (A) Naturalun Low-E IG PEL-N-127-02396-00001 3 5 air 0.32 0.60 0.69 57 35 with grilles-between-the-glass PEL-N-127-02396-00002 0.32 0.54 0.62 57 31 IG ALTITUDE GLAZING WIT FAM INULATIN 1" (A) Advanced Low-E IG PEL-N-127-02495-00001 3 5 air 0.30 0.33 0.61 59 with grilles-between-the-glass PEL-N-127-02495-00002 0.30 0.30 0.55 59 1" (A) undefense IG PEL-N-127-02509-00001 3 5 air 0.30 0.24 0.57 59 with grilles-between-the-glass PEL-N-127-02509-00002 0.30 0.22 0.51 59 1" (A) AdvancedComfort Low-E IG PEL-N-127-02523-00001 3 5 air 0.24 0.32 0.60 46 28 with grilles-between-the-glass PEL-N-127-02523-00002 0.24 0.29 0.54 46 27 1" (A) Naturalun Low-E IG PEL-N-127-02485-00001 3 5 air 0.31 0.60 0.69 58 36 with grilles-between-the-glass PEL-N-127-02485-00002 0.31 0.54 0.62 58 32 R-Value = 1/U-Factor GC = olar eat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. For center-glass values, see the Product Performance section. ee the Product Performance section for more detailed information or visit www.energystar.gov for Energy tar guidelines. Rev. 06/29/2018 F--7
GLAZING PERFRMANCE - TTAL UNIT Tinted Glass PECIAL APE Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values 1 GC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone FIXED WIT TINTED GLAZING N NC C 1 2 3 11/16" Bronze Advanced Low-E IG PEL-N-127-02452-00001 5 3 argon 0.27 0.28 0.40 63 22 with grilles-between-the-glass PEL-N-127-02452-00002 0.27 0.26 0.36 63 21 11/16" Gray Advanced Low-E IG PEL-N-127-02579-00001 5 3 argon 0.27 0.26 0.34 62 21 with grilles-between-the-glass PEL-N-127-02579-00002 0.27 0.24 0.31 62 20 11/16" Green Advanced Low-E IG PEL-N-127-02455-00001 5 3 argon 0.27 0.32 0.54 63 25 with grilles-between-the-glass PEL-N-127-02455-00002 0.27 0.29 0.49 63 23 FIXED WIT FAM INULATIN AND TINTED GLAZING 11/16" Bronze Advanced Low-E IG PEL-N-127-02541-00001 5 3 argon 0.26 0.28 0.40 63 24 with grilles-between-the-glass PEL-N-127-02541-00002 0.26 0.26 0.36 63 22 11/16" Gray Advanced Low-E IG PEL-N-127-02586-00001 5 3 argon 0.26 0.26 0.34 62 22 with grilles-between-the-glass PEL-N-127-02586-00002 0.26 0.24 0.31 62 21 11/16" Green Advanced Low-E IG PEL-N-127-02544-00001 5 3 argon 0.26 0.32 0.54 63 26 with grilles-between-the-glass PEL-N-127-02544-00002 0.26 0.29 0.49 63 24 IG ALTITUDE GLAZING WIT TINTED GLAZING 11/16" Bronze Advanced Low-E IG PEL-N-127-02443-00001 5 3 air 0.31 0.29 0.40 59 with grilles-between-the-glass PEL-N-127-02443-00002 0.31 0.26 0.36 59 11/16" Gray Advanced Low-E IG PEL-N-127-02445-00001 5 3 air 0.31 0.27 0.34 59 with grilles-between-the-glass PEL-N-127-02445-00002 0.31 0.24 0.31 59 11/16" Green Advanced Low-E IG PEL-N-127-02447-00001 5 3 air 0.31 0.33 0.54 59 with grilles-between-the-glass PEL-N-127-02447-00002 0.31 0.30 0.49 59 IG ALTITUDE GLAZING WIT FAM INULATIN AND TINTED GLAZING 11/16" Bronze Advanced Low-E IG PEL-N-127-02532-00001 5 3 air 0.30 0.29 0.40 60 with grilles-between-the-glass PEL-N-127-02532-00002 0.30 0.26 0.36 60 11/16" Gray Advanced Low-E IG PEL-N-127-02534-00001 5 3 air 0.30 0.27 0.34 60 with grilles-between-the-glass PEL-N-127-02534-00002 0.30 0.24 0.31 60 11/16" Green Advanced Low-E IG PEL-N-127-02536-00001 5 3 air 0.30 0.33 0.54 60 with grilles-between-the-glass PEL-N-127-02536-00002 0.30 0.30 0.49 60 R-Value = 1/U-Factor GC = olar eat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. For center-glass values, see the Product Performance section. ee the Product Performance section for more detailed information or visit www.energystar.gov for Energy tar guidelines. Rev. 06/29/2018 F--8
GLAZING PERFRMANCE - TTAL UNIT Laminated Glass PECIAL APE Glazing Thickness Type of Glazing NFRC Certified Product # Ext. Glass (mm) Int. Gap Fill U-Factor Performance Values 1 GC VLT CR haded Areas Meet ENERGY TAR Performance Criteria in Zones hown U.. Canada 2 Zone ER Zone FIXED WIT LAMINATED GLAZING N NC C 1 2 3 11/16" Advanced Low-E IG PEL-N-127-02416-00001 4 7 argon 0.26 0.32 0.60 61 26 with grilles-between-the-glass PEL-N-127-02416-00002 0.26 0.29 0.54 61 24 11/16" undefense IG PEL-N-127-02430-00001 4 7 argon 0.26 0.24 0.56 62 21 with grilles-between-the-glass PEL-N-127-02430-00002 0.26 0.22 0.50 62 20 FIXED WIT FAM INULATIN AND LAMINATED GLAZING 11/16" Advanced Low-E IG PEL-N-127-02505-00001 4 7 argon 0.25 0.32 0.60 62 27 with grilles-between-the-glass PEL-N-127-02505-00002 0.25 0.29 0.54 62 25 11/16" undefense IG PEL-N-127-02519-00001 4 7 argon 0.25 0.24 0.56 63 23 with grilles-between-the-glass PEL-N-127-02519-00002 0.25 0.22 0.50 63 21 IG ALTITUDE GLAZING WIT LAMINATED GLAZING 11/16" Advanced Low-E IG PEL-N-127-02409-00001 4 7 air 0.30 0.32 0.60 58 with grilles-between-the-glass PEL-N-127-02409-00002 0.30 0.29 0.54 58 11/16" undefense IG PEL-N-127-02423-00001 4 7 air 0.30 0.24 0.56 58 with grilles-between-the-glass PEL-N-127-02423-00002 0.30 0.22 0.50 58 IG ALTITUDE GLAZING WIT FAM INULATIN AND LAMINATED GLAZING 11/16" Advanced Low-E IG PEL-N-127-02498-00001 4 7 air 0.29 0.32 0.60 59 with grilles-between-the-glass PEL-N-127-02498-00002 0.29 0.29 0.54 59 11/16" undefense IG PEL-N-127-02512-00001 4 7 air 0.29 0.24 0.56 59 with grilles-between-the-glass PEL-N-127-02512-00002 0.29 0.22 0.50 59 R-Value = 1/U-Factor GC = olar eat Gain Coefficient VLT % = Visible Light Transmission CR = Condensation Resistance ER = Canadian Energy Rating Climate Zones (1) Glazing performance values are calculated based on NFRC 100, NFRC 200 and NFRC 500. ENERGY TAR values are updated to 2016 (Version 6) criteria. (2) The values shown are based on Canada's updated ENERGY TAR 2015 initiative. For center-glass values, see the Product Performance section. ee the Product Performance section for more detailed information or visit www.energystar.gov for Energy tar guidelines. Rev. 06/29/2018 F--9
CMBINATIN AEMBLIE PECIAL APE Combinations are a great way to create visual interest in any project. A combination is an assembly formed by two or more separate windows or doors whose frames are mulled together by a combination or reinforcing mullion. Pella window combinations are available in an endless variety of arrangements. Below are examples of available field-assembled combinations. ee the Composites and Combination section for requirements and limitations related to mulling various combinations. Contact your local Pella sales representative for more information. Fixed Window Combinations INGLE UNIT WIT ALF CIRCLE 2-WIDE WIT ALF CIRCLE INGLE UNIT WIT QUARTER CIRCLE INGLE UNIT WIT ARC EAD 2-WIDE WIT ARC EAD Double- or ingle-ung Combinations INGLE UNIT WIT ALF CIRCLE 2-WIDE WIT ALF CIRCLE INGLE UNIT WIT ARC EAD 2-WIDE WIT ARC EAD PRINGLINE WIT DUBLE-UNG / INGLE-UNG liding Window Combinations INGLE UNIT WIT ALF CIRCLE INGLE UNIT WIT ARC EAD INGLE UNIT WIT PARTIAL ARC EAD Click here for the Impervia Combinations ection Downloadable PDF file. F--10
GRILLE T YPE Grille Profiles Grille Pat terns PECIAL APE Grille Profiles GRILLE-BETWEEN-TE-GLA Contoured Contour Grille Patterns GRILLE-BETWEEN-TE-GLA alf Circle Traditional alf Circle unburst1 alf Circle tarburst1 Quarter Circle Traditional Quarter Circle tarburst1 Partial Arch ead Traditional Arch ead Traditional pringline Traditional pringline unburst Trapezoid Trapezoid Pentagon Triangle Triangle Isosceles Triangle APE WIT GRILLE PATTERN T MATC CMPANIN UNIT Fixed Frame with alf Circle Fixed Frame with Quarter Circle Arch ead with Fixed Window Flankers liding Window with Arch ead liding Window with Partial Arch ead pringline unburst with Double-ung/ ingle-ung Flankers Fixed Frame with Trapezoid (1) Available in select shapes. The above are examples only. Grilles may not align when multiple units are combined below or beside special shape units. F--11
CUTM APE AND IZE PECIAL APE RIGT LEFT alf Circle Arch ead pringline Partial Arch ead Quarter Circle RIGT LEFT LEFT RIGT Trapezoid Pentagon Triangle Isosceles Triangle FRAME DIMENIN Description Frame Radius Width eight Min. Max. Min. Max. Min. Max. Min. Unit Frame Angle Max. Unit Frame Angle Max. quare Footage alf Circle 11.75" 50.75" 23.5" 101.5" 36 Arch ead 11.75" 150" 17.5" 107.5" 11.5" 95.5" 6" 90 160 36 pringline 11.75" 35.75" 23.5" 71.5" 47.5" 95.5" 8" 36 Partial Arch ead 11.75" 150" 17.5" 71.5" 11.5" 95.5" 8" 40 160 36 Quarter Circle 11.75" 71.5" 13.5" 71.5" 36 Trapezoid 11.5" 95.5" 11.5" 95.5" 8" 20 160 36 Pentagon 17.5" 95.5" 23.5" 95.5" 8" 40 160 36 Isosceles Triangle 17.5" 95.5" 11.5" 95.5" 20 90 36 Triangle 17.5" 95.5" 11.5" 71.5" 20 140 36 Miscellaneous Formulas VIIBLE GLA ACTUAL GLA Width = Frame 3-1/4" eight = Frame 3-1/4" Width = Frame 2" eight = Frame 2" FRAME EIGT FRAME WIDT To convert areas to square meters (m 2 ), multiply square feet by 0.0929. For all shapes, calculate the area as if it were a rectangle. ( ) = Not Available; = hort side Units are available in 1/8" increments. F--12
DETAILED PRDUCT DECRIPTIN PECIAL APE FRAME Frame is glass-filled AB with acrylic capstock [with optional foam insulation 1]. verall frame depth is 3 or 3-1/4 Nominal wall thickness of members is.090 thick. ambs contain factory-drilled (counter-bored) installation screw holes. EXTERIR / INTERIR urfaces are prefinished. Color is [White] [Tan] [Brown] [Black] [Morning ky Gray]. - or - Dual-color option [Tan] [Brown] [Black] [Morning ky Gray] exterior with White interior. GLAZING YTEM Quality float glass complying with ATM C 1036. 1" insulating glass [[annealed] [tempered]] [obscure 2] [clear] [[Advanced] [undefense ] [AdvancedComfort] [Naturalun] Low-E coated, [with argon]]] [[bronze] [gray] [green] Advanced Low-E [with Argon]] sealed and bonded to frame. igh altitude glazing available. PTINAL PRDUCT Grilles Grilles-Between-the-Glass Insulating glass contains contoured aluminum grilles permanently installed between two panes of glass. Grilles are factory prefinished [White] [Tan] [Brown] [Black] [Morning ky Gray] to match interior and exterior finish. FAM INULATIN INERT 1 (1) Foam insulation inserts are not available with clear glazing. (2) bscure glazing is not available when AdvancedComfort Low-E coated IG is specified. Rev. 06/29/2018 F--13
UNIT ECTIN Frame Types PECIAL APE 3" [76] 3 1/4" [83] 3" BLCK FRAME 3 1/4" BLCK FRAME 1 5/16" 1 11/16" [33] [43] 1 5/16" [33] 1 15/16" [49] 3" BLCK FRAME w/ TANDARD FIN 3 1/4" BLCK FRAME w/ TANDARD FIN 7/8" [23] 2 3/8" [60] 7/8" [23] [53] 3" BLCK FRAME w/ FF ET FIN 3 1/4" BLCK FRAME w/ FF ET FIN cale 3" = 1' 0" All dimensions are approximate. F--14
UNIT ECTIN 3" Block Frame PECIAL APE N FIN N FIN 3" [76] 3" [76] EAD 1 5/16" 1 11/16" WIT TANDARD FIN [33] [43] 1 5/16" 1 11/16" [33] [43] WIT TANDARD FIN EAD WIT FFET FIN 7/8" WIT FFET FIN [23] [53] 7/8" [23] [53] EAD EAD EAD EAD ILL ILL ILL ILL ILL ILL 3" [76] 3" [76] AMB AMB [42] [42] 1 5/16" [33] 1 5/16" [33] AMB AMB [53] [53] 7/8" [23] 7/8" [23] AMB AMB TYPICAL INING MULLIN FRAME FRAME FIXED ILL (Transom) EAD 3 1/4" [83] FRAME FRAME FIXED ILL (Transom) EAD 4 11/16" [119] INING MULLIN (orizontal or Vertical, orizontal hown) INING MULLIN (orizontal or Vertical, orizontal hown) cale 3" = 1' 0" All dimensions are approximate. ee the Installation and Performance section at www.pellaadm.com for mullion applications and structural limitations. F--15
UNIT ECTIN 3-1/4" Block Frame PECIAL APE N FIN N FIN 3 1/4" [83] 3 1/4" [83] EAD 1 5/16" 1 15/16" WIT TANDARD [33] [49] FIN WIT TANDARD FIN 1 5/16" [33] 1 15/16" [49] EAD WIT FFET FIN 7/8" 2 3/8" WIT [23] FFET [60] FIN 7/8" [23] 2 3/8" [60] EAD EAD ILL ILL EAD ILL ILL EAD ILL ILL 3 1/4" [83] 3 1/4" [83] TYPICAL INING MULLIN AMB AMB 1 15/16" [49] 1 5/16" 1 15/16" [33] [49] 1 5/16" [33] AMB AMB 2 3/8" [60] 7/8" 2 3/8" [23] [60] 7/8" [23] AMB AMB FRAME FRAME FIXED ILL (Transom) EAD 4 7/16" [112] INING MULLIN (orizontal or Vertical, orizontal hown) cale 3" = 1' 0" All dimensions are approximate. ee the Installation and Performance section at www.pellaadm.com for mullion applications and structural limitations. F--16