Battery Circuit Testers Dashboard & Radio Ignition Service Soldering Voltage Testers Spark Plug General ELECTRICAL SERVICE 283
ELECTRICAL SERVICE Battery 303180 Battery Carrier Scissor Lock Type Used to lift and install most top post and side terminal batteries Designed to transfer lifting force to a secure hold on the battery Scissor lock type jaws with serrated teeth ensure a positive grip on the side of the battery Sturdy vinyl handle for carrying and transportation Caters for batteries up to 175mm (7 ) wide 303181 Battery Carrier Heavy Duty Tubular steel handle with comfort grip enables fast and safe handling of batteries Fully adjustable for battery size. Gripping pads are acid resistant and serrated to ensure a firm hold Solid, robust construction with zinc plated arms Gripping pads size 80 x 35mm Caters for batteries sized 100 190mm wide Carrying arm extends to a maximum of 195mm via ratcheting tooth adjuster 303183 Battery Hydrometer & Thermometer Professional quality hydrometer which takes ambient temperature into account when assessing specific gravity readings Temperature compensating. Built-in thermometer compensates for temperature variations to provide more accurate reading of the condition of battery fluid and its state of charge Graduated scale on in-built meter advises the operator to add or subtract certain values above or beyond 26.6 C (80 F) Built-in float gauge and thermometer Glass tube construction with rubber moulded housing Overall length: 285mm Battery Post & Terminal Cleaners Handy cleaning tools for battery cleaning work Ideal for the removal of dirt, corrosion and rust Heavy duty units built for the professional 303004 303178 Part No. Description Bristles 303004 Double sided Brass 303177 Internal & external function Stainless steel 303178 Four way unit with post reamer for positive & negative posts 303177 284
303001 Battery Side-Terminal Ratchet Wrench Designed for use on 5/16 battery terminal bolts Reversible ratchet removes battery terminal bolts with ease PVC dipped handle helps prevent electrical shock and shorting during use Chrome plated finish for maximum corrosion resistance 303179 Battery Terminal Spreader, Remover & Cleaner Suitable for cleaning and spreading battery cable terminals Sharp teeth effectively clean corrosion from the terminal Squeeze the handle to spread the clamp Ergonomically designed, insulated handles and manufactured from durable steel Battery Terminal Puller For the removal of battery terminals, small gears, pulleys and bearings on electric motors Suitable for removing battery terminal clamps, including corroded spring type, without damaging the battery post Simple to use by positioning the jaws under the terminal and tightening the forcing screw Progressive screw action with simple spring loaded release Part No. Reach Spread 303175 25mm 33mm CIRCUIT TESTERS Circuit Tester Computer Safe, LED Professional quality LED computer safe testing tool Suitable for testing injector pulse, automotive computer circuits and all primary automotive electrical circuits High impact transparent acetate handle, stainless steel probe, LED polarity indicator, long lead and crocodile clip Handle illuminates when circuit is active Ideal for use on circuits where sensitive testing is required High impedance protects computer Part No. Voltage Lead Length Probe Length 302014 0 12V 1200mm 75mm Circuit Tester Metal Body Metal body circuit testing tool Light for testing low voltage DC electrical circuits Steel body construction Ideal for use in DIY automotive applications Part No. Voltage Lead Length Probe Length 302148 4 24V 185mm 12mm 285
ELECTRICAL SERVICE Circuit Testers Professional Professional quality circuit testing tools Light for testing low voltage DC electrical circuits High impact transparent handle, steel probe, replaceable bulb, strain relief spring lead design and crocodile clip Available in heavy duty, standard professional and extra long professional 302145 302144 302001 Part No. Description Voltage Lead Length Probe Length 302144 Heavy duty 6 24V (DC) 1500mm 100mm 302145 Professional 6 24V (DC) 700 2500mm (Retractable coil) 80mm 302001 Professional (Extra long) 6 24V (DC) 1000 3000mm (Retractable coil) 170mm 302000 Circuit Tester Multi-Purpose Connector Set A multi-purpose automotive testing kit designed for use on all makes of multimeters and test equipment Comprehensive set tests, isolates and evaluates automotive electrical circuits Set includes numerous direct fit terminal connectors, additional probes, alligator clips, potentiometer, LED indicators and SRS connectors Various male/female connection terminals Enables easy electrical diagnosis using the correct connector for the wide range of electrical terminals used on modern vehicles Suits most European, Japanese and American terminals Supplied with a detailed listing and breakdown of kit contents and their suitability 302003 Wire Piercing Guide For use in testing / piercing insulated wire Clips on electrical wire, quickly and easily guides tester probe into centre of wire during testing Eliminates stab injuries as a result of piercing wires Features three wire locators, suitable for 1 4mm insulated wire Manufactured from sturdy clear plastic resistant to oil, fuel and thinners Overall length: 55mm Wire size: 1 4mm 302146 Polarity Tester Cordless Professional cordless circuit testing tool For testing polarity of DC electrical circuits from 6 28V Plastic body and LCD (Liquid Crystal Display) Computer safe, ideal for use on circuits where sensitive testing is required No batteries required Strong reinforced plastic construction Safe with ECM s, sensors, airbags, transducers etc. 286
Dashboard & Radio 313026 Air Bag Removal Kit For efficient damage free removal of airbags on most late model Audi, BMW, GM (Opel), Mercedes Benz, Renault and Volkswagen Description Airbag Removal Tools ¼ Sq. Dr. 87mm Bit Sockets Suit Audi A4 & A6, Volkswagen Passat (late model) & Polo 2 Suit Volkswagen Golf (late model) & Beetle, Seat 2 Suit Volkswagen Golf (1998-2004), Passat (1997) & Bora (1999) 1 Suit Volkswagen Passat (2000) 1 Driver side airbag removal on 1999-2004 new body style Volkswagen Passat, Jetta, Golf and Beetle 1 Torx T25 suits BMW 1 Torx T30 suits Audi, GM (Opel), Renault, Volkswagen 1 Qty Tamperproof Torx T25H suits BMW 1 Tamperproof Torx T30H suits Audi, BMW, GM (Opel), Mercedes Benz 1 Hex 5mm suits Audi 1 302175 Antenna Removal Tool For easy and safe removal and replacement of aerials and antennas Special tool designed to remove the bezel that holds the antenna in place Suits most vehicles Bezel Antenna wrench 302153 Dashboard Service Tool Kit Mercedes Benz Professional tool kit of specialty tools specific for dashboard and auxiliary service work Ideal for service and removal work of meters, gauges, radios, locks and accessories Covers most Mercedes Benz models since 1992 Contents Description Application Components Radio removal tools MB 1992 onwards. Models include: W129, W140, W202, W210 Ignition lock removal tool set MB. Models include: W124 & W201 155mm Removal hooks for instrument cluster MB. Models include: W107, W116, W123, W124, W126, W140, and W201. 287
ELECTRICAL SERVICE 302178 Radio Removal Tool Set European Vehicles Handy and compact set of pocket sized tools for the safe and quick removal of radios from a range of vehicle makes including BMW, Ford, Mercedes-Benz, Volkswagen and Audi Supplied in labelled storage pouch 9 piece set 35mm 302156 Radio Removal Tool Set U-Hooks Simple and handy set makes radio removal fast, easy and damage free Suits many different applications Simply insert U-hooks (2.5mm) into holes of radio face plate and release the retaining clips. Once retaining clips have been released pull out the instrument panel using the U-Hooks as handles 2 piece set 35mm 302017 Radio Removal & Dashboard Service Master Kit Comprehensive kit that services most vehicles Supplied in custom blow mould box with individual identification markings Comes with a vehicle application listing 52 piece set No.5 Keys Double DIN Keys Allen Key Bent U-Hooks No.4 Keys No.3 Keys T-Bar Hooks No.2 Keys E-9 Keys (Clarion late model) E-8L Keys (Kenwood Mask) E-10 Keys (Clarion Double DIN) No.1 Keys U-Hooks E-6 Keys (Panasonic up to 2006) E-7 Keys (Kenwood up to 1998) E-5 Keys (Panasonic) Long V-Hooks Small Pin Keys E-3 Keys (Kenwood up to 2002) E-2 Keys (Sony up to 2002) E-15 Keys (Sony up to 2005) E-1 Keys (Kenwood 98-01) E-4 Keys (Sony up to 2001) Pioneer & JVC Keys BMW Pentagon Keys Fiat Keys 288
Ignition Service 301069 Ignition Points File Designed specifically for ignition points and electrode cleaning Overall length: 80mm Spark Testers Spark testing tools for testing ignition spark operation Available in adjustable gap and sealed inline designs Designed to connect on to ignition (HT) lead and test spark operation Suitable for electronic and mechanical automotive ignition systems Adjustable Spark Plug Testers Test for non-start conditions and for spark strength Simulates spark plug under compression load 302167 Part No. Description 302165 Fixed jaw 302167 Flexible lead 302165 302026 Inline Spark Plug Tester Designed to connect between spark plug and ignition (HT) lead Enables quick and easy ignition spark testing and problem diagnosis 302158 Inline HT Spark Plug Tester Set Designed to connect on to spark plug and ignition (HT) lead Manufactured from transparent plastic material that illuminates indicating ignition spark operation Enables quick and easy ignition spark testing and problem diagnosis 4 piece set 289
ELECTRICAL SERVICE 302166 Inline HT Lead/Inductive Pick-Up Ignition Tester Inductive pick-up designed to connect on to ignition (HT) lead Features illuminating light which indicates ignition spark operation Enables quick, easy and safe ignition spark testing and problem diagnosis Soldering 302120 Soldering Aid Tool Holds wires together so they can be soldered. Used by inserting wires under holding clips and manoeuvring together until correct distance is achieved for soldering Insulating PVC dipped handles Overall length: 250mm Voltage Testers 302150 Voltmeter Analogue voltmeter Single function meter for use in testing DC voltage (0 16V) Features large analogue gauge, probe and alligator ground clip Ideal for automotive and marine applications Simple and easy to use Voltage Tester Battery and Alternator Professional voltage testing tool For use in testing battery condition (5 12.5V) and alternator charging voltage (13 14V) For use on 12V vehicle applications only LED display indicates battery and alternator charging voltage conditions Manufactured utilising plastic body with magnetic backing for hands free operation Part No. Battery Test Alternator Test 302147 5 12.5V 13 14V 290
Voltage Tester Battery and Ignition Leads Professional voltage testing tool For use in testing battery (3 13V) and ignition lead operation For use on 12V vehicle applications only LED display indicates battery voltage conditions Part No. Battery Test 302149 3 13V Spark Plug Spark Plug Installation Tools Universal installation tools to assist in removal and installation of spark plugs Designed to hold the spark plug firmly during use Featuring flexible rubber design for access in limited or difficult applications 302157 Part No. Description Overall Length 302157 Universal 200mm 302159 Flexible shaft 225mm 302002 Flexible shaft 316mm 302159 302002 Spark Plug Sockets For quick and easy removal and installation of vehicle spark plugs All designs have effective spark plug holding features Manufactured from chrome vanadium steel Spark Plug Sockets Extra long spark plug sockets for easy removal and installation of spark plugs in deep recesses with limited or difficult access including wider ceramic high performance type plugs Manufactured from satin chrome vanadium steel Features knurled barrel for non-slip grip and inbuilt heavy duty rubber spark plug retainer to hold plug in situ All sockets feature a 3/8 square drive Bi-Hex Design provides increased strength compared to a traditional hex design, allowing for a more compact spark plug without compromising strength requirements. Part No. Size Style Overall Length 302225 14mm Bi-hex 90mm (short) 302224 14mm Bi-hex 250mm 302222 16mm Single hex 250mm 302223 21mm Single hex 250mm Traditional Hex Design Bi-Hex Design 291
ELECTRICAL SERVICE Spark Plug Sockets Universal Joint Sets Universal joint spark plug socket set with magnetic spark plug holder Manufactured from polished chrome vanadium steel 2 piece set Part No. Drive Style Size 302171 3/8 Sq. Dr. Single hex 16mm (5/8 ) & 21mm (13/16 ) 302172 1/2 Sq. Dr. Single hex 16mm (5/8 ) & 21mm (13/16 ) 302171 302172 Spark Plug Gap Gauge Accurately sets spark plug gaps Easy to read markings to set gaps quickly Tapered hole adjusts electrode Simple to use. Place the spark plug onto the tapered gauge then turn until the correct gap setting is obtained Part No. SAE Range Metric Range 302163 0.020 0.100 0.5 2.5mm 302168 Spark Plug Thread Chaser Tapered, double ended design to dress or repair 14mm and 18mm spark plug threads Simple and effective tool used by running the tool through the damaged thread The tool removes carbon, corrosion and dirt while also straightening and deburring the threads Use with a deep socket, open-end spanner or box wrench Note: Tool used by trained professional to avoid engine damage Spark Plug Thread Insert Kits For the repair and service of dirty plug holes in aluminium cylinder heads Solid steel inserts replace damaged threads and eliminate the possibility of coil wind out Manufactured from drop forged heat treated steel for maximum service life and durability Installation: Carefully tap out the damaged thread using the tap supplied. The repaired thread will enable the screw insertion of one of the above steel inserts depending on length Note: Tool used by trained professional to avoid engine damage 302300 Part No. Diameter Contents 302176 14mm 1 x 14mm Tap. Inserts One each of: 10, 11, 13, 19 (mm) Replacement Insert Set Part No. Size 302177 10, 11, 13, 19 (mm) 302300 18mm 1 x 18mm Tap. Inserts One each of: 11, 13, 16, 21 (mm) 302301 11, 13, 16, 21 (mm) 302301 (Replacement insert set) 292
general 302005 Alternator Bit Set Comprehensive set designed for alternator service work For easy removal of over running alternator pulleys either on or off the vehicle Locks the alternator shaft into position while pulley retainer is removed Six and twelve point socket bits suit Bosch type alternator free wheel drive pulleys Applications include: Alfa Romeo, Audi, BMW, Citroen, Fiat, GM, Mercedes Benz, Mitsubishi, Renault, Seat, Skoda, Volvo Contents Part No. Description Size 302006 Alternator combination bit socket 1/2 Sq. Dr. x T50 (Torx 6-Point) X 113mm 302007 Alternator combination bit socket 1/2 Sq. Dr. x M10 (Spline 12-Point) X 113mm Torx bit 10mm (Hex) x T40 (Torx 6-Point) x 74mm Torx bit 10mm (Hex) x T50 (Torx 6-Point) x 74mm 302008 Spline bit 10mm (Hex) x M8 (Spline 12-Point) x 74mm Spline bit 10mm (Hex) x M10 (Spline 12-Point) x 74mm Hex bit 10mm (Hex) x 8mm (Hex) x 74mm Hex bit 10mm (Hex) x 10mm (Hex) x 74mm 302009 Hex alternator nut 33 tooth x 17mm 302010 Hex alternator nut 33 tooth x 22mm 302011 Hex alternator nut 22mm 302012 4-Point alternator nut 17mm hex tip 302013 Hex bit adaptor 1/2 Sq. Dr. x 10mm Torx Bit (6-Point star) Spline Bit (12-Point) Hex Bit (6-Point) Wire Terminal Tools Designed for easy removal of wires from connectors Eliminates wire or connector damage Rectangular blades for pack-com terminals, flat blade to open connectors, fork for ALDL connector Prongs depress the barbs on conventional terminals 302028 302029 Part No. Style 302028 Terminal Block 302029 General Purpose 302027 302028 & 302029 (2 piece set) Spring-loaded tube for weather pack terminals Slip out wire Insert and twist tool Slip out wire Insert tool Rectangular blades for pack-con terminals, flat blade to open connectors, fork for ALDL connector 293
ELECTRICAL SERVICE 302174 Connector Release Tools For use on modern electrical connection applications Tools are designed to provide access to and disconnect electrical connectors Individual puller and pusher style tools provide easy connection/removal regardless of component location Either tool can be used conveniently with one hand Overall length: 220mm Plastic reinforced handles 303003 Electrical Surge Protector 12V Provides protection against voltage spikes and surges to safeguard against damage to sensitive electronic systems Protects fuel gauge, ABS brakes, radios, tape and CD players, car alarms, SRS air bags, LED instrumentation, EFI, fuel and climate control systems Designed for use on 12 volt systems Clamps to battery terminals prior to welding 302154 Memory Retainer Power Supply Maintains the memory of vehicle radios, clocks and computer functions when battery is disconnected Use with a 9 volt battery and plug into cigarette lighter Retains settings for up to four hours 302173 Offset Distributor Clamp Wrenches Eccentric shape enables access to hard to reach areas around the distributor Reaches around obstructions to turn the distributor lock nut with its double-ended wrench 1/2 and 9/16 Use tool by itself or in conjunction with 3/8 square drive tools such as a ratchet or accessory bar Suits Ford and Holden V8 engines Manufactured from drop forged steel for maximum strength and chrome plated for additional corrosion resistance 302004 Remote Control Starter Switch Used to bypass ignition switch by connecting starter to Solenoid Heavy duty rubber insulated copper wire complete with insulated clips Ideal for generator, starter, electrical tests, fuel pump tests, setting points, adjusting tappets and compression checks 294