This manual is furnished with each new TENNANT Model E. It provides necessary operating and preventive maintenance instructions. Read this manual completely and understand the machine before operating or servicing it. This manual covers all machine variations and standard accessories. The instruction portion of the manual consists of the Specification, Operation, Maintenance, and Appendix sections. The parts portion consists of the Low Dump Model Parts; Multi-Level Dump Model Parts; EE Parts; Options; Hydraulic Components; Electrical Components; and Cross Reference sections. All right side and left side references to the machine are determined by facing the direction of forward travel. All hardware considered to be of a common nature or locally available has been omitted from the parts sections. Be aware that this machine may contain metric hardware. Make sure you use equivalent hardware when replacement becomes necessary. This machine will provide excellent service. However, the best results will be obtained at minimum costs if: D The machine is operated with reasonable care. D The machine is maintained regularly --- per the maintenance instructions provided. D The machine is maintained with Tennant Company supplied or equivalent parts. Parts and supplies may be ordered by phone or mail from any Tennant Company parts and service center, distributor, or from any of the Tennant Company subsidiaries. Before ordering parts or supplies, be sure to have your machine model number and serial number handy. Fill out the data block below for future reference. The telephone numbers, telex numbers, mailing addresses, and locations of those outlets are listed in the Customer Documents section of the manual. MACHINE DATA Please fill out at time of installation. Machine Serial Number --- Engine Serial Number --- Sales Representative --- Customer Number --- Date of Installation --- Manual Number --- MM Revision: 0 Published: 5---9 Trademark Registered in: Austria, Benelux, Denmark, England, France, Germany, Italy, Spain, Switzerland, United States, Argentina, Australia, Canada, Japan, Mexico, Sweden, by TENNANT COMPANY, Minneapolis, Minnesota, U.S.A. Acknowledgements: Technical information and/or illustrations supplied by Sperry-Vickers Corporation; Eaton Corporation, Hydraulics Division and Lamb Electric. Copyright 989, 99 Tennant Company, Printed in U.S.A.
CONTENTS LOW DUMP MODEL PARTS SECTION 5 Page ORDERING REPAIR PARTS................ 5- Fig. --- Recommended General Maintenance Items............. 5- Fig. --- Replacement Brushes............. 5-5 Fig. --- Main Frame Group................ 5-6 Fig. --- Seat and Battery Panel Group...... 5-8 Fig. 5 --- Instrument and Component Panel Group.................. 5-0 Fig. 6 --- Hopper Group.................... 5- Fig. 7 --- Hopper Cover and Fire Door Group. 5- Fig. 8 --- Filter Shaker Group............... 5-6 Fig. 9 --- Vacuum Fan Group............... 5-8 Fig. 0 --- Front Wheels and Brakes Group... 5-0 Fig. --- Main Brush Drive Group........... 5- Fig. --- Side Brush Lift Group............. 5- Fig. --- Steering Wheel Group............ 5-5 Fig. --- Hydraulic System................ 5-6 Fig. 5 --- Hydraulic System................ 5-7 Fig. 6 --- Main Control Valve Group......... 5-8 Fig. 7 --- Hydraulic Reservoir Assembly..... 5-9 Fig. 8 --- Directional Control Group......... 5-0 Fig. 9 --- Directional Control Group......... 5- Fig. 0 --- Rear Drive Wheel Motor Group..... 5- Fig. --- Hopper Lift Cylinder and Side Brush Motor Group.................. 5-5 Fig. --- Rear Drive Wheel and Support Group........................ 5-6 Fig. --- Battery Wire Harness Group....... 5-7 Fig. --- Hourmeter Group................ 5-8 Fig. 5 --- Voltmeter Group................. 5-8 Fig. 6 --- Overhead Guard Group........... 5-9 Fig. 7 --- Bumper Group................... 5-0 NOTE: SECTION 5, LOW DUMP MODEL PARTS, lists repair parts for a low dump model machine. This section also contains parts common to all models of the machine. 5-
LOW DUMP MODEL PARTS 5- E MM (9---89)
The components used in this machine have been carefully selected for performance and safety. Use only Tennant Company specified or equivalent parts. To receive prompt service in filling of your parts orders, please direct all orders for parts with Tennant Company part numbers to the Tennant Company, and all orders for parts with vendor part numbers to the local supplier of the respective vendor. When ordering parts, please furnish all of the following information:. Machine model number - shown on the machine data plate. SER.NO. GVW. LBS. KG. TENNANT COMPANY MINNEAPOLIS, MINNESOTA USA ORDERING REPAIR PARTS LOW DUMP MODEL PARTS If the old part cannot be identified, send it to us with the quantity needed specified on the order. Any claim for loss or damage to a shipment in transit should be filed promptly against the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicate items back ordered. If parts received are suspected to be incorrect or defective, please write, wire, or phone the Tennant Company representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required. SERIAL NUMBER INFORMATION EXPLANATION Serial number listings are shown to indicate on which machines each part can be used. These listings are explained by the following examples: (000000--- ) The part can be used on all machines. (00--- ) The part can be used on all machines beginning with the serial number listed.. Machine serial number - shown on the machine data plate.. Power source - gasoline, LPG, diesel, electric.. Company name. 5. Shipping address. 6. Billing address. 7. Name, first and last - of person ordering parts. 8. Telephone number. 9. Purchase order number. 0. Part number, description, and quantity - of each item on the order.. Customer ID Number. Do not order parts by key number or the figure number of the illustrated parts. Indented items indicate parts of assemblies. Standard hardware is furnished only when part of a purchased assembly. Please get hardware from a local hardware supplier. (000000---000) The part can be used on all machines up to and including serial number listed. (00---005678) The part can be used on all machines between and including the serial numbers listed. Where xxxxxx s are listed in place of a serial number, it indicates a change was made but the exact serial number had not been established when the catalog went to press. SI UNITS OF MEASURE (INTERNATIONAL SYSTEM) Metric equivalents have been included, where applicable, throughout this parts catalog. FASTENER STRENGTH IDENTIFICATION Fasteners required to have high---strength qualities equivalent to SAE Grade 8 are identified throughout this catalog by the description GR 8. Unless identified by this description, all standard fasteners are SAE Grade 5. (Specifications and design subject to change without notice.) E MM (9---89) 5-
LOW DUMP MODEL PARTS Fig. -- Recommended General Maintenance Items 05607 5 (000000--- ) Replacement Parts Package, Low Dump SK5 (000000--- ) Replacement Kit, Fusible Link 75 (000000--- ) Skirt, Shroud 67 (000000--- ) Skirt, Rear 5--- (000000--- ) V-Belt, Set of 9--- (000000--- ) V-Belt, Set of 505 (000000--- ) V-Belt, Powerband 6 (000000--- ) V-Belt 8060 (000000--- ) Lip, Rubber 5 86 (000000--- ) Seal, Top Pan 8 (000000--- ) Seal, Side Pan 6778--- (000000--- ) Element, Hydraulic Fluid Filter 5876 (000000--- ) Filter, Panel 5 (000000--- ) Replacement Parts Package, Multi-Level Dump SK5 (000000--- ) Replacement Kit, Fusible Link 75 (000000--- ) Skirt, Shroud 67 (000000--- ) Skirt, Rear 5--- (000000--- ) V-Belt, Set of 9--- (000000--- ) V-Belt, Set of 505 (000000--- ) V-Belt, Powerband 6 (000000--- ) V-Belt 5607 (000000--- ) Lip Assembly 5 86 (000000--- ) Seal, Top Pan 70 (000000--- ) Lip, Side 6778--- (000000--- ) Element, Hydraulic Fluid Filter 8 (000000--- ) Seal, Side Pan 5876 (000000--- ) Filter, Panel 597 (000000--- ) Replacement Parts Package, Scrubber 600 (000000--- ) Blade, Squeegee, Rear (000000--- ) Blade, Back Up, Neoprene 600 (000000--- ) Blade, Squeegee, Side (000000--- ) Blade, Front, Rubber 5- E MM (9---89)
LOW DUMP MODEL PARTS 5 6 Fig. -- Replacement Brushes 056 07N (000000--- ) Main Brush, 8 Row Nylon 55 (000000--- ) Main Brush, 8 Row Polypropylene 6 (000000--- ) Main Brush, 8 Row Polypropylene and Wire 60 (000000--- ) Main Brush, 8 Row Union Mix and Wire 898 (000000--- ) Main Brush, 5 Row Nylon 0N (000000--- ) Main Brush, Row Nylon 69 (000000--- ) Main Brush, Row Union Mix and Wire 07A (000000--- ) Main Brush, Row Union Mix 708P (000000--- ) Side Brush Assembly, Polypropylene 09600P (000000--- ) Side Brush, Polypropylene 750 (000000--- ) Hub, Brush Adaptor 708N (000000--- ) Side Brush Assembly, Nylon 09600N (000000--- ) Side Brush, Nylon 750 (000000--- ) Hub, Brush Adaptor 6857 (000000--- ) Side Brush Assembly, Scrub, Polypropylene 8 (000000--- ) Side Brush, Scrub, Polypropylene 5 55 (000000--- ) U-Joint, Side Brush Drive 6858 (000000--- ) Side Brush Assembly, Scrub, Polypropylene 59 (000000--- ) Side Brush, Scrub, Polypropylene 55 (000000--- ) U-Joint, Side Brush Drive 6 59 (000000--- ) Scrub Brush, Row Polypropylene 6 (000000--- ) Scrub Brush, Row Polypropylene 6 680 (000000--- ) Scrub Brush, Row Abrasive 6 6 (000000--- ) Scrub Brush, 8 Row Nylon E MM (9---89) 5-5
LOW DUMP MODEL PARTS 6 8 7 0 9 5 5 6 5 6 5 7 8 9 7 5 7 9 0 5 8 0 Fig. -- Main Frame Group 5-6 E MM (9---89)
LOW DUMP MODEL PARTS Fig. -- Main Frame Group 0556 5--- (000000--- ) Bearing, R.H. 0807 (000000--- ) Fitting, Grease 55--- (000000--- ) Bearing, L.H. 0759 (000000--- ) Fitting, Grease 5 8 (000000--- ) Shim 6 807 (000000--- ) Lift Arm Assembly 7 5--- (000000--- ) Cam 8 580--- (000000--- ) Bearing 9 69A (000000--- ) Rod 0 789 (000000--- ) Decal, Caution 67 (000000--- ) Washer, Neoprene 6 (000000--- ) Hook 67 (000000--- ) Sleeve 8--- (000000--- ) Strip 5 8 (000000--- ) Seal 6 86 (000000--- ) Seal 7 5 (000000--- ) Strip 8 67 (000000--- ) Skirt, Rear 9 865 (000000--- ) Strip 0 09 (000000--- ) Chain 0 880 (000000--- ) Chain, Brass (EE only) 7907 (000000--- ) Arm and Label Assembly, Hopper Stop 75 (000000--- ) Skirt, Shroud 5857 (000000--- ) Strip, Skirt Retainer 8--- (000000--- ) Door, L.H. 5 575 (000000--- ) Seal, Foam Rubber 6 706 (000000--- ) Door, Brush, R.H. 7 7065--- (000000--- ) Seal, Foam Rubber 8 7065--- (000000--- ) Seal, Foam Rubber 9 7065--- (000000--- ) Seal, Foam Rubber 0 705 (000000--- ) Frame, Main 9 (000000--- ) Decal, E 87 (000000--- ) Bar, Spacer 8 (000000--- ) Guide, Battery 8 (000000--- ) Bracket, Battery Spacer 5 577 (000000--- ) Label, Main Brush Lift 5-7
LOW DUMP MODEL PARTS 5 6 7 8 9 8 6 0 5 7 9 6 9 6 5 9 0 7 8 5 9 0 7 8 Fig. -- Seat and Battery Panel Group 5-8
LOW DUMP MODEL PARTS Fig. -- Seat and Battery Panel Group 0556 60 (000000--- ) Seat, Back Rest 600 (000000--- ) Seat (000000--- ) Frame, Back Rest 00 (000000--- ) Frame, Seat 5 60 (000000--- 00507) Pin, Roll 6 56 (000000--- 00507) Rod, Seat Spring 7 56 (000000--- 00507) Spring, Compression 8 560 (000000--- 00507) Support, Seat Spring 9 87 (000000--- ) Switch, 5 A 0 50 (000000--- ) Bracket, Support 9895 (000000--- ) Tread, Floor 758A (000000--- ) Strap, Panel Support 97 (000000--- ) Label, Battery Receptacle 97 (000000--- ) Label, Charging Receptacle 5 98 (000000--- ) Label, Charger and Machine Receptacle 6 7606 (000000--- ) Insulator 7 006 (000000--- ) Horn 8 89 (000000--- ) Panel, Side, L.H. 9 789 (000000--- ) Support, Seat 0 90 (000000--- ) Label, Maintenance 07 (000000--- ) Bumper, Rubber 800 (000000--- ) Lid 789 (000000--- ) Label, Caution 95 (000000--- ) Label, Hydraulic Valve 5 85 (000000--- ) Bumper, Rubber 6 8 (000000--- ) Cover 7 565 (000000--- ) Panel, Center 8 5 (000000--- ) Label, Caution, Charging 9 967 (000000--- ) Rod, Cover Support 0 97 (000000--- ) Angle, Cover Support 785 (000000--- ) Panel and Label Assembly, Rear 790 (000000--- ) Cover, Battery 777 (000000--- ) Seal, Foam Rubber 0 (000000--- ) Label, TENNANT Letters 5 5 (000000--- ) Label, Battery Connection When Charging 6 979 (000000--- ) Label, Caution, Battery Charger 7 958 (000000--- ) Label, Battery Requirements 8 56 (00508--- ) Spring, Compression 9 6595---8 (00508--- ) Molding, Trim 5-9
LOW DUMP MODEL PARTS 5 6 7 0 6 7 8 9 0 9 8 5 Fig. 5 -- Instrument and Component Panel Group 5-0 E MM (9---89)
LOW DUMP MODEL PARTS Fig. 5 -- Instrument and Component Panel Group 05565 85 (000000--- ) Cover, Instrument panel 56 (000000--- ) Panel, Instrument 778--- (000000--- ) Plugbutton 778--- (000000--- ) Plugbutton 5 06--- (000000--- ) Grommet 6 09 (000000--- ) Switch, Ignition 096 (000000--- ) Key, Ignition 7 895 (000000--- ) Decal, Start 8 88 (000000--- ) Switch, Pushbutton 9 078 (000000--- ) Switch, Pushbutton 0 899 (000000--- ) Decal, Filter Shaker, Shut Off 06---8 (000000--- ) Grommet 66 (000000--- ) Strip (000000--- ) Block, Fuse 95 (000000--- ) Decal, 5 A 5 76 (000000--- ) Decal, 5 A 6 07 (000000--- ) Fuse, 5 A 7 98 (000000--- ) Fuse, 5 A 8 97 (000000--- ) Panel, Component 9 85 (000000--- ) Relay 0 5 (000000--- ) Relay 790 (000000--- ) Resistor --- (000000--- ) Circuit Breaker, 50 A 06--- (000000--- ) Grommet 89 (000000--- ) Block, Standoff 5 (000000--- ) Wire Harness, Includes Wires:, 7, 8, 9, 0,,,,,,, 77, 96, 97 5087 (000000--- ) Wire Harness, Shaker 555 (000000--- ) Wire Assembly, Includes Wires: 6, 7 56 (000000--- ) Wire Harness, Horn 57 (000000--- ) Wire Kit, Includes Wires: 6,, 8, 9, 0, 6 555 (000000--- ) Wire Kit, Includes Wires:, 888 (000000--- ) Cable, Motor 89 (000000--- ) Connector, Gray E MM (9---89) 5-
LOW DUMP MODEL PARTS 9 8 5 6 Hopper Lift Arm 7 8 9 7 0 0 8 6 9 5 Fig. 6 -- Hopper Group 5-
LOW DUMP MODEL PARTS Fig. 6 -- Hopper Group 0566 56 (000000--- ) Door, Hopper 56--- (000000--- ) Seal, Foam Rubber 56--- (000000--- ) Seal, Foam Rubber 5697 (000000--- ) Catch, Spring 5 606 (000000--- ) Bumper (Used on EE Low Dump only) 6 05 (000000--- ) Hopper 7 096 (000000--- ) Support, L.H. 8 87579 (000000--- ) Catch 9 78 (000000--- ) Rivet 0 868 (000000--- ) Deflector 097 (000000--- ) Support, R.H. 869 (000000--- ) Baffle, Inner 6595 (000000--- ) Deflector, R.H. 778--- (000000--- ) Plugbutton 5 866 (000000--- ) Seal, Tube 6 505 (000000--- ) Plate, Retaining 7 8060 (000000--- ) Lip, Rubber 5 8 6080 (000000--- ) Angle, Backing 9 6077 (000000--- ) Plate 0 6596 (000000--- ) Deflector, L.H. 58670 (000000--- ) Screw, Hex, Nylon 56799 (000000--- ) Rivet 5 0886 (000000--- ) Seal, Hopper 5-
LOW DUMP MODEL PARTS 9 6 5 7 9 8 7 6 Fig. 7 -- Hopper Cover and Fire Door Group 5- E MM (9---89)
LOW DUMP MODEL PARTS Fig. 7 -- Hopper Cover and Fire Door Group 0556 508 (000000--- ) Cover Assembly 86 (000000--- ) Seal, Hopper Cover 85 (000000--- ) Seal, Hopper Cover 509 (000000--- ) Strip, Fire Door Seal 5 50 (000000--- ) Door, Fire 6 6875 (000000--- ) Shaft, Fire Door 7 57 (000000--- ) Spring 8 SK5 (000000--- ) Fusible Link 9 0567 (000000--- ) Pin, Clevis E MM (9---89) 5-5
LOW DUMP MODEL PARTS 0 5 8 7 6 6 9 9 0 5 6 7 7 7 Hopper 9 8 7 0 8 8 8 Fig. 8 -- Filter Shaker Group 5-6 E MM (9---89)
LOW DUMP MODEL PARTS Fig. 8 -- Filter Shaker Group 05665 6666 (000000--- ) Strap, Shaker Motor 6658 (000000--- ) Pad, Rubber 99 (000000--- ) Motor, Electric 550 (000000--- ) Weight, Eccentric 5 06 (000000--- ) Screw, Set 6 875 (000000--- ) Bar, Shaker 7 666 (000000--- ) Pad, Rubber 8 66 (000000--- ) Clamp, Cable 9 588 (000000--- ) Spring, Shaker 0 666 (000000--- ) Sleeve, Rubber 588 (000000--- ) Bar, Shaker 6665 (000000--- ) Sleeve, Rubber 85 (000000--- ) Bracket, Retaining 85 (000000--- ) Bracket, Retaining 5 5876 (000000--- ) Element, Panel Filter, 7 Pleats 5 96 (000000--- ) Element, Panel Filter, 9 Pleats 6 85 (000000--- ) Carrier, Filter 7 87 (000000--- ) Bracket 8 856 (000000--- ) Bracket Assembly, Mounting 9 857 (000000--- ) Rivet, Steel 0 759 (000000--- ) Strain Relief 87 (000000--- ) Wire Harness, Shaker 508--- (000000--- ) Wire, Shaker Motor 5-7
LOW DUMP MODEL PARTS 9 6 5 7 8 9 6 5 0 8 7 6 8 0 7 7 6 8 5 5 9 0 Fig. 9 -- Vacuum Fan Group 5-8 E MM (9---89)
LOW DUMP MODEL PARTS Fig. 9 -- Vacuum Fan Group 05566 87 (000000--- ) Cover, Vacuum 067A (000000--- ) Clip, Vacuum Housing 5 (000000--- ) Seal, Foam Rubber 7066 (000000--- ) Fan Assembly, Vacuum 690 (000000--- ) Washer, Special 5 6988A (000000--- ) Impeller 6 868 (000000--- ) Sleeve 7 8680 (000000--- ) Washer 8 0707 (000000--- ) Bearing, Ball 9 6985 (000000--- ) Sleeve 0 7065 (000000--- ) Housing, Fan 009 (000000--- ) Key, Square 698 (000000--- ) Shaft, Fan 0090 (000000--- ) Key, Square 6987 (000000--- ) Sheave 5 70 (000000--- ) Base, Fan Pivot 6 98 (000000--- ) Clamp, Worm Drive 7 9888 (000000--- ) Hose, Canvas 8 98 (000000--- ) Clamp, Worm Drive 69 (000000--- ) Damper Assembly 9 6906 (000000--- ) Bracket, Hose Mount 0 6908 (000000--- ) Adaptor, Hose 6 (000000--- ) Bracket 6A (000000--- ) Lever, Damper 60 (000000--- ) Plate, Damper 69 (000000--- ) Seal 5 7069 (000000--- ) Seal 6 668 (000000--- ) Clamp, Conduit 7 (000000--- ) Swivel 8 07 (000000--- ) Stop 9 807 (000000--- ) Rod, Vacuum Shut-Off 0 8075 (000000--- ) Spring, Compression 8079 (000000--- ) Fastener 88 (000000--- ) Collar, Set 050 (000000--- ) Cable, Locking 706 (000000--- ) Deflector 5 6 (000000--- ) V-Belt 6 07 (000000--- ) Spring, Tension 7 900 (000000--- ) Decal, Vacuum Shut-Off E MM (9---89) 5-9
LOW DUMP MODEL PARTS 6 9 9 0 5 5 6 0 6 9 7 5 7 8 9 7 8 8 6 Fig. 0 -- Front Wheels and Brakes Group 5-0
LOW DUMP MODEL PARTS Fig. 0 -- Front Wheels and Brakes Group 05567 69 (000000--- ) Parking Brake 8 (000000--- ) Pin, Roll 59A (000000--- ) Link 0560 (000000--- ) Spring, Compression 0677 (000000--- ) Pin, Roll 5 (000000--- ) Support 6--- (000000--- ) Lever, Release 567 (000000--- ) Rod, Parking Brake 86 (000000--- ) Washer, Flat, 0.50 07 (000000--- ) Pad, Pedal 5 567 (000000--- ) Shaft, Brake 6 80--- (000000--- ) Hanger 7 009 (000000--- ) Spring, Tension 8 896 (000000--- ) Pin, Clevis 9 595--- (000000--- ) Clevis, Adjustable 0 605 (000000--- ) Pin, Clevis 8--- (000000--- ) Rod, Adjustable 8 (000000--- ) Arm 00 (000000--- ) Pin, Roll 080 (000000--- ) Axle and Bushing Assembly 5 99 (000000--- ) Bushing, Sleeve 6 7 (000000--- ) Cam 7 0 (000000--- ) Pin 8 05 (000000--- ) Sleeve 9 0 (000000--- ) Shoe, Brake 0 09758 (000000--- ) Spring, Tension 06 (000000--- ) Ring, Retaining 596 (000000--- ) Bearing, Thrust 8076 (000000--- ) Tire and Wheel Assembly, Front 86 (000000--- ) Bearing, Ball (000000--- ) Ring, Retaining, Internal 5 85 (000000--- ) Hub, Front Wheel 6 0 (000000--- ) Tire and Wheel Assembly 597A (000000--- ) Tire 7 57 (000000--- ) Spacer 8 09006 (000000--- ) Washer 9 65 (000000--- ) Washer 5-
LOW DUMP MODEL PARTS 70 6 6 67 68 69 5 9 8 6 8 9 0 7 0 6 7 9 5 5 6 7 8 8 7 0 7 59 65 60 58 6 6 7 8 6 5 6 5 66 5 50 7 6 9 56 57 5 5 55 5 9 7 9 8 7 7 8 8 5 9 0 Fig. -- Main Brush Drive Group 05568 899 (000000--- 00508) Replacement Kit, Motor F/89 (See Electrical Components) 50089 (00509--- ) Motor, Electric (See Electrical Components) 0098 (000000--- ) Key, Square 500 (00509--- ) Bracket, Motor Mounting 79 (000000--- ) Sheave 5 8 (000000--- ) Sheave 6 85 (000000--- ) Sheave, Idler 7 085 (000000--- ) Bearing, Ball 5 8 000 (000000--- ) Ring, Retaining, Internal 9 05 (000000--- ) Ring, Retaining, External 0 8 (000000--- ) Arm Assembly, Idler 00 (000000--- ) Pin, Roll 76 (000000--- ) Fitting, Grease 59A (000000--- ) Mount, Idler 6065 (000000--- ) Bushing, Sleeve 5 97 (000000--- ) Turnbuckle 6 6 (000000--- ) Sleeve 7 60 (000000--- ) Sleeve 8 (000000--- ) Arm 9 605 (000000--- ) Pin, Clevis 0 595--- (000000--- ) Clevis, Adjustable 5-
LOW DUMP MODEL PARTS 67 (000000--- ) Cable Assembly (Low Dump Model only) 68 (000000--- ) Roller, Cable (Low Dump Model only) 67 (000000--- ) Guide (Low Dump Model only) 075 (000000--- ) Sleeve (Low Dump Model only) 5 0050 (000000--- ) Pin, Roll 6 6785 (000000--- ) Spring, Tension 7 686 (000000--- ) Arm 8 68 (000000--- ) Stop 9 6800 (000000--- ) Pin, Clevis 0 687 (000000--- ) Arm 00 (000000--- ) Pin, Roll 668 (000000--- ) Idler 5--- (000000--- ) V---Belt, Set of 8 (000000--- ) Sheave 5 65 (000000--- ) Pin, Roll 680 (000000--- ) Sheave Assembly 6 90 (000000--- ) Sheave 7 (000000--- ) Ring, Retaining, Internal 8 08 (000000--- ) Bearing, Ball 9 5 (000000--- ) Ring, Retaining, External 0 7 (000000--- ) Ring, Retaining, Internal 5 (000000--- ) Sleeve, Felt 00A (000000--- ) Bearing and Shaft 7 (000000--- ) Plate, Brush End 96A (000000--- ) Plug, Brush Drive 5 686 (000000--- ) Pin, Groove 6 85 (000000--- ) Bearing and Collar 7 --- (000000--- ) Flange, Bearing 8 7066 (000000--- ) Shaft, Brush Counter 9 5095 (000000--- ) Plate, Bearing Mounting 50 5095 (000000--- ) Bracket, L 5 (000000--- ) Hub Assembly, Brush Lift 5 098 (000000--- ) Pin, Dowel (000000--- ) Arm and Plug Assembly, Brush, R.H. 5 666 (000000--- ) Arm, Brush, R.H. 5 778--- (000000--- ) Plugbutton 55 690 (000000--- ) Bearing, Ball 56 06 (000000--- ) Ring, Retaining, Internal 57 0707 (000000--- ) Plug, Brush 58 87 (000000--- ) Rod, Main Brush Lift 59 58 (000000--- ) Nut, Wheel 60 07--- (000000--- ) Lever, Lift Handle 6 06--- (000000--- ) Bracket, Clip 6 7 (000000--- ) Spring, Compression 6 0 (000000--- ) Handle 6 656 (000000--- ) Knob 65 786 (000000--- ) Pin, Clevis 66 5 (000000--- ) Spring, Tension 67 80--- (000000--- ) Bar, Adjustable 68 8 (000000--- ) Rod, L 69 97 (000000--- ) Knob 70 9 (000000--- ) V-Belt 5-
LOW DUMP MODEL PARTS 9 8 7 6 5 5 0 6 7 Side Brush Fig. -- Side Brush Lift Group 05569 656 (000000--- ) Knob 0 (000000--- ) Handle 9 (000000--- ) Nut, Special 06--- (000000--- ) Bracket, Clip 5 07--- (000000--- ) Lever, Lift Handle 6 7 (000000--- ) Spring 7 9 (000000--- ) Cable Assembly 8 0889 (000000--- ) Sleeve 9 50A (000000--- ) Lever, Lift 0 56 (000000--- ) Pin 9 (000000--- ) Pin, Clevis 806 (000000--- ) Arm, Side Brush 07 (000000--- ) Bracket, Adjustment 67 (000000--- ) Lug 5 8 (000000--- ) Bracket, Motor Mounting 6 60 (000000--- ) Support, Bumper 7 60 (000000--- ) Bumper 5- E MM (9---89)
LOW DUMP MODEL PARTS 0 9 8 7 6 5 Fig. -- Steering Wheel Group 05570 59 (000000--- ) Flange, Bearing 58 (000000--- ) Bearing and Collar 709 (000000--- ) Shaft, Bearing Mounting 696 (000000--- ) Arm, Pitman 697 (000000--- ) Steering Gear Assembly 5 699 (000000--- ) Gear and Column Assembly 6 698 (000000--- ) Cable, Horn 7 700--- (000000--- ) Plate, Base 8 99 (000000--- ) Disc 9 700 (000000--- ) Horn Button 700--- (000000--- ) Cap, Contact 700--- (000000--- ) Cup, Contact 700--- (000000--- ) Spring, Horn Button 700--- (000000--- ) Screw, Wood 700---5 (000000--- ) Plate, Base 700---6 (000000--- ) Button, Horn 700---7 (000000--- ) Cover, Horn Button 0 769 (000000--- ) Wheel, Steering 5--- (000000--- ) Support, Steering Column E MM (9---89) 5-5
LOW DUMP MODEL PARTS Fig. 0 Fig. 7 Fig. 8 Fig. 6 Fig. Fig. -- Hydraulic System 05670 (For machines below serial number 00506) 5-6
LOW DUMP MODEL PARTS Fig. 0 Fig. 7 Fig. 6 Fig. 9 Fig. Fig. 5 -- Hydraulic System 05670 (For machines with serial number 00506 and above) E MM (5--- 9) 5-7
LOW DUMP MODEL PARTS 7 9 5 0 6 7 8 Fig. 6 -- Main Control Valve Group 0557 9 (000000--- ) Handle, Control Valve 87 (000000--- ) Boss, Valve Handle Pivot 88 (000000--- ) Link, Valve Actuator 605 (000000--- ) Pin, Clevis 5 577 (000000--- ) Pin, Clevis 6 9 (000000--- ) Valve, Hydraulic (See Hydraulic Components) 7 568 (000000--- ) Fitting, Elbow 8 868 (000000--- ) Fitting, Elbow 9 556--- (000000--- ) Adaptor, Restricting 0 75 (000000--- ) Fitting, Elbow 86--- (000000--- ) Hose 0--- (000000--- ) Hose 0---7 (000000--- ) Hose 857 (000000--- ) Hose 5-8
LOW DUMP MODEL PARTS 5 5 6 0 7 8 6 7 8 9 Fig. 7 -- Hydraulic Reservoir Assembly 0557 8 (000000--- ) Reservoir Assembly, Hydraulic 905 (000000--- ) Filler and Breather Assembly 068 (000000--- ) Bracket, Cable Clamp 97 (000000--- ) Cover, Hydraulic Reservoir 06 (000000--- ) Bracket, L 5 9759 (000000--- ) Gasket, Cover 6 75A (000000--- ) Reservoir, Hydraulic 7 ---7 (000000--- ) Fitting, Elbow, 5 8 700---0 (000000--- ) Fitting, Nipple 9 06 (000000--- ) Fitting, Plug 0 690 (000000--- ) Fitting, Straight 5780 (000000--- ) Fitting, Elbow, 5 58 (00506--- ) Fitting, Tee 775 (00506--- ) Fitting, Straight 585 (000000--- ) Decal, Hydraulic Oil Only 5 99 (000000--- ) Decal, Hydraulic Fluid 6 86 (000000--- ) Hose 7 567 (000000--- ) Hose 8 6866 (00506--- ) Hose 65869---5 (000000--- ) Hydraulic Fluid, TENNANT 5W---0 5 Gal (8.9 L) 5-9
LOW DUMP MODEL PARTS 7 9 5 6 8 6 7 5 0 6 8 7 5 0 8 0 9 9 5 5 Fig. 8 -- Directional Control Group 5-0
LOW DUMP MODEL PARTS Fig. 8 -- Directional Control Group 05575 786 (000000--- 00505) Pump, Propelling (See Hydraulic Components) 6 (000000--- 00505) Fitting, Elbow, 5 65 (000000--- 00505) Fitting, Straight 868 (000000--- 00505) Fitting, Elbow 5 798 (000000--- 00505) Fitting, Straight 6 756 (000000--- 00505) Fitting, Straight 7 (000000--- 00505) Fitting, Straight 8 96 (000000--- 00505) Fitting, Elbow, 5 9 500 (000000--- 00505) Fitting, Straight 0 7655 (000000--- 00505) Fitting, Elbow 7875 (000000--- 00505) Bracket Assembly, Pump 7865 (000000--- 00505) Bracket, Pump 06598 (000000--- 00505) Pin, Clevis 787 (000000--- 00505) Yoke, End 6 (000000--- 00505) Spring, Compression 5 9 (000000--- 00505) Nut, Slotted 6 6 (000000--- 00505) Sheave, Step 7 797 (000000--- 00505) Bushing 8 787 (000000--- 00505) Bracket, Centering Spring 9 968 (000000--- 00505) Plate, Spring Steel 0 5 (000000--- 00505) Mount, Pintle Arm 57 (000000--- 00505) Isolator, Vibration 5 (000000--- 00505) Arm, Pintle 506 (000000--- 00505) Ball Joint 696 (000000--- 00505) Rod, Directional Control 5 69009 (000000--- 00505) Bell Crank 6 50--- 0 (000000--- 00505) Bushing, Sleeve 7 60 (000000--- 00505) Ball Joint 8 76 (000000--- 00505) Stud 9 86 (000000--- 00505) Bushing 0 0 (000000--- 00505) Foot Pedal, Directional 067A (000000--- 00505) Pin, Clevis 505 (000000--- 00505) V-Belt 79 (000000--- 00505) Sheave 08898 (000000--- 00505) Strap, Pintle 5 06 (000000--- 00505) Screw, Set 5-
LOW DUMP MODEL PARTS 7 0 8 9 6 5 0 9 6 5 5 7 8 8 9 6 7 8 7 6 5 9 0 9 0 8 5 6 6 Fig. 9 -- Directional Control Group 5-
LOW DUMP MODEL PARTS Fig. 9 -- Directional Control Group 0790 60 (00506--- ) Pump, Propelling (See Hydraulic Components) 506 (00506--- ) Pump, Gear (See Hydraulic Components) 655--- (00506--- ) O---Ring Gland 5076 (00506--- ) Fitting, Elbow 5 79 (00506--- ) Fitting, Straight 6 568 (00506--- ) Fitting, Elbow 7 0755 (00506--- ) Fitting, Tee 8 7980 (00506--- ) Fitting, Elbow 9 507 (00506--- ) Fitting, Elbow, 5 0 6768 (00506--- ) Fitting, Tee 7875 (00506--- ) Bracket Assembly, Pump 7865 (00506--- ) Bracket, Pump 06598 (00506--- ) Pin, Clevis 787 (00506--- ) Yoke, End 6 (00506--- ) Spring, Compression 5 9 (00506--- ) Nut, Slotted 6 6 (00506--- ) Sheave, Step 7 797 (00506--- ) Bushing 8 79 (00506--- ) Sheave 9 86 (00506--- ) Bushing 0 505 (00506--- ) V-Belt 67 (00506--- ) Strap, Neutral Switch Angle 67 (00506--- ) Angle, Neutral Switch Mounting 676 (00506--- ) Switch Assembly, Neutral 666 (00506--- ) Plate, Switch Backing 5 878 (00506--- ) O---Ring 6 669 (00506--- ) Plate, Pintle Mount L.H. 7 85 (00506--- ) Pin, Roll 8 56855 (00506--- ) Bumper 8 9 57875 (00506--- ) Coupling, Shaft 0 67 (00506--- ) Arm, Pintle Shaft 699 (00506--- ) Sleeve 509 (00506--- ) Rod---End 6700 (00506--- ) Shock Absorber 657 (00506--- ) Angle, Mounting 5 787 (00506--- ) Bracket, Centering Spring 6 968 (00506--- ) Plate, Directional Control 8 7 677 (00506--- ) Angle, Centering Spring Spacer 8 09900--- (00506--- ) Sleeve 9 55 (00506--- ) Ball Joint 0 696 (00506--- ) Rod, Directional Control 69009 (00506--- ) Bellcrank 50---0 (00506--- ) Bushing, Sleeve 60 (00506--- ) Ball Joint 76 (00506--- ) Stud 5 0 (00506--- ) Foot Pedal, Directional 6 067A (00506--- ) Pin, Clevis 5-
LOW DUMP MODEL PARTS 8 5 7 6 Fig. 0 -- Rear Drive Wheel Motor Group 0557 855 (000000--- ) Hose 80 (000000--- ) Bracket, Hose Clamp 96 (000000--- ) Tie, Cable 5 866 (000000--- ) Motor, Hydraulic (See Hydraulic Components) 5 (000000--- ) Fitting, Straight 6 50960 (00506--- ) Fitting, Straight 7 67 (00506--- ) Fitting, Elbow, 5 8 50959 (00506--- ) Hose 5-
LOW DUMP MODEL PARTS 8 7 7 5 6 6 8 5 6 9 0 8 9 7 0 Fig. -- Hopper Lift Cylinder and Side Brush Motor Group 0557 788 (000000--- ) Ring, Retaining, External 5 (000000--- ) Pin, Clevis 06 (000000--- ) Cylinder, Lift 09 (000000--- ) Seal Kit 899 (000000--- ) Clevis, Adjustable 5 75 (000000--- ) Fitting, Straight 6 56690 (000000--- ) Fitting, Straight 7 99 (000000--- ) Fitting, Tee 8 7980 (000000--- ) Fitting, Elbow 9 860 (000000--- ) Hose 0 75 (000000--- ) Fitting, Elbow, 5 779 (000000---00505) Motor, Hydraulic (See Hydraulic Components) 779 (00506--- ) Motor, Hydraulic (See Hydraulic Components) 858 (000000--- ) Hose 99 (000000--- ) Fitting, Tee 759 (000000--- ) Fitting, Straight 5 6907 (000000--- ) Bracket, Filter Mount 6 6778 (000000--- ) Filter Head 7 6778--- (000000--- ) Element, Filter 8 868 (000000--- ) Fitting, Elbow 9 856 (000000--- ) Hose 0 0 (000000--- ) Sleeve, Hydraulic 96 (000000--- ) Tie, Cable 5-5
LOW DUMP MODEL PARTS 5 5 6 0 7 9 Hydraulic Motor 8 Fig. -- Rear Drive Wheel and Support Group 05576 (000000--- ) Nut, Slotted 779 (000000--- ) Washer 690 (000000--- ) Cup Bearing and Support Assembly 989 (000000--- ) Bearing, Cup 5 988 (000000--- ) Bearing, Cone 6 98 (000000--- ) Pin, Drive 7 558 (000000--- ) Bar, Support 8 77 (000000--- ) Link, Steering 87 (000000--- ) Wheel and Tire Assembly 9 85 (000000--- ) Tire 0 8 (000000--- ) Hub, Wheel 5-6
LOW DUMP MODEL PARTS Batteries Fig. -- Battery Wire Harness Group 05577 7986 (000000--- ) Wire Harness, Battery 89 (000000--- ) Connector, Gray 7985 (000000--- ) Connector, Orange 5-7
LOW DUMP MODEL PARTS Fig. -- Hourmeter Group 05578 58 (000000--- ) Hourmeter, Engine 888 (000000--- ) Dampener 880 (000000--- ) Wire Kit 07 (000000--- ) Fuse, 5 A 76 (000000--- ) Decal, 5 A, Label Fig. 5 -- Voltmeter Group 05579 76079 (000000--- ) Voltmeter 07 (000000--- ) Fuse, 5 A 5069 (000000--- ) Wire Kit 5-8
LOW DUMP MODEL PARTS 5 6 Fig. 6 -- Overhead Guard Group 05580 6 (000000--- ) Guard, Top 77 (000000--- ) Leg, Front, R.H. 75 (000000--- ) Leg, Front, L.H. 66 (000000--- ) Support, Rear 5 577 (000000--- ) Stiffener, R.H. 6 578 (000000--- ) Stiffener, L.H. 5-9
LOW DUMP MODEL PARTS 0 9 8 7 5 Main Frame 6 Fig. 7 -- Bumper Group 0558 596 (000000--- ) Bumper, Corner, R.H. 600 (000000--- ) Bumper, Rear 59 (000000--- ) Bumper, Corner, L.H. 599 (000000--- ) Bumper, Side, L.H. 5 86 (000000--- ) Bumper, Front 6 889 (000000--- ) Bracket,L 7 597 (000000--- ) Bumper, Side, R.H. 780 (000000--- ) Chain Assembly 8 89 (000000--- ) Bolt, Eye 9 778 (000000--- ) Tube, Chain cover 0 777 (000000--- ) Chain 097 (000000--- ) Hook 08 (000000--- ) Tip, Rubber 59 (000000--- ) Label, Hazard---Raised Bumper 5-0
Page ORDERING REPAIR PARTS................ 6- Fig. --- Main Frame Group, Multi-Level Dump.............. 6- Fig. --- Hopper Lift Arms Group, Multi-Level Dump.............. 6-6 Fig. --- Hopper Group, Multi-Level Dump... 6-8 Fig. --- Filter Carrier Group, Multi-Level Dump........................ 6-0 Fig. 5 --- Hopper Door Assembly, Multi-Level Dump.............. 6- Fig. 6 --- Vacuum Fan Bracket Group, Multi-Level Dump.............. 6- Fig. 7 --- Front Wheels and Brake Group, Multi-Level Dump.............. 6- Fig. 8 --- Main Brush Drive Group, Multi-Level Dump.............. 6- Fig. 9 --- Side Brush Arm Assembly, Multi-Level Dump.............. 6-5 Fig. 0 --- Hydraulic System, Multi-Level Dump 6-6 Fig. --- Hydraulic System, Multi-Level Dump 6-7 Fig. --- Dump Cylinder and Valve Group, Multi-Level Dump.............. 6-8 Fig. --- Main Control Valve and Hopper Lift Cylinder Group, Multi-Level Dump 6-9 Fig. --- Side Brush Motor Group, Multi-Level Dump.............. 6-0 Fig. 5 --- Directional Control Group, Multi-Level Dump.............. 6- Fig. 6 --- Bumper Group, Multi-Level Dump.. 6- Fig. 7 --- Overhead Guard Group, Multi-Level Dump.............. 6- NOTE: SECTION 6, MULTI--- LEVEL DUMP MODEL PARTS, lists repair parts unique to an multi---level dump model machine. CONTENTS MULTI-LEVEL DUMP MODEL PARTS SECTION 6 6-
MULTI-LEVEL DUMP MODEL PARTS 6- E MM (9---89)
The components used in this machine have been carefully selected for performance and safety. Use only Tennant Company specified or equivalent parts. To receive prompt service in filling of your parts orders, please direct all orders for parts with Tennant Company part numbers to the Tennant Company, and all orders for parts with vendor part numbers to the local supplier of the respective vendor. When ordering parts, please furnish all of the following information:. Machine model number - shown on the machine data plate. SER.NO. GVW. LBS. KG. TENNANT COMPANY MINNEAPOLIS, MINNESOTA USA ORDERING REPAIR PARTS MULTI-LEVEL DUMP MODEL PARTS If the old part cannot be identified, send it to us with the quantity needed specified on the order. Any claim for loss or damage to a shipment in transit should be filed promptly against the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicate items back ordered. If parts received are suspected to be incorrect or defective, please write, wire, or phone the Tennant Company representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required. SERIAL NUMBER INFORMATION EXPLANATION Serial number listings are shown to indicate on which machines each part can be used. These listings are explained by the following examples: (000000--- ) The part can be used on all machines. (00--- ) The part can be used on all machines beginning with the serial number listed.. Machine serial number - shown on the machine data plate.. Power source - gasoline, LPG, diesel, electric.. Company name. 5. Shipping address. 6. Billing address. 7. Name, first and last - of person ordering parts. 8. Telephone number. 9. Purchase order number. 0. Part number, description, and quantity - of each item on the order.. Customer ID Number. Do not order parts by key number or the figure number of the illustrated parts. Indented items indicate parts of assemblies. Standard hardware is furnished only when part of a purchased assembly. Please get hardware from a local hardware supplier. (000000---000) The part can be used on all machines up to and including serial number listed. (00---005678) The part can be used on all machines between and including the serial numbers listed. Where xxxxxx s are listed in place of a serial number, it indicates a change was made but the exact serial number had not been established when the catalog went to press. SI UNITS OF MEASURE (INTERNATIONAL SYSTEM) Metric equivalents have been included, where applicable, throughout this parts catalog. FASTENER STRENGTH IDENTIFICATION Fasteners required to have high---strength qualities equivalent to SAE Grade 8 are identified throughout this catalog by the description GR 8. Unless identified by this description, all standard fasteners are SAE Grade 5. (Specifications and design subject to change without notice.) E MM (9---89) 6-
MULTI-LEVEL DUMP MODEL PARTS 0 5 7 8 9 6 5 5 Fig. -- Main Frame Group, Multi-Level Dump 6- E MM (9---89)
MULTI-LEVEL DUMP MODEL PARTS Fig. -- Main Frame Group, Multi-Level Dump 0558 608 (000000--- ) Frame, Main 86 (000000--- ) Seal, Top Pan 507 (000000--- ) Retainer, Top Seal 85 (000000--- ) Seal, Foam Rubber 5 68 (000000--- ) Arm and Label Assembly, Safety 6 699 (000000--- ) Pin, Clevis 7 06--- (000000--- ) Grommet 8 557 (000000--- ) Label, Roll In---out 9 6507 (000000--- ) Label, Caution Hopper 0 557 (000000--- ) Label, Warning, Hopper Safety 8 (000000--- ) Bumper,L.H. 895 (000000--- ) Shim 889 (000000--- ) Bracket, L 8 (000000--- ) Seal, Side Pan 6 5 8--- (000000--- ) Strip 6-5
MULTI-LEVEL DUMP MODEL PARTS 5 6 6 0 7 5 6 0 9 0 6 9 8 5 5 5 6 8 5 7 5 7 6 9 8 5 6 5 6 5 7 0 Fig. -- Hopper Lift Arms Group, Multi-Level Dump 8 9 6-6 E MM (9---89)
MULTI-LEVEL DUMP MODEL PARTS Fig. -- Hopper Lift Arms Group, Multi-Level Dump 0558 07---5 (000000--- ) Pin, Clevis 550 (000000--- ) Arm Assembly, R.H. 559 (000000--- ) Bearing, Journal 6988 (000000--- ) Clamp Assembly, Hose 6989 (000000--- ) Pad, Neoprene 5 6985 (000000--- ) Clamp, Hose 6 56 (000000--- ) Bearing, Lift Arm, R.H. 7 56--- (000000--- ) Bearing, Lift Arm, L.H. 8 550 (000000--- ) Arm Assembly, L.H. 9 559 (000000--- ) Bearing, Journal 0 906 (000000--- ) Arm Assembly, Lift 556 (000000--- ) Bearing, Journal 557 (000000--- ) Label, Warning, Hopper Safety 5575 (000000--- ) Label, Caution, Hopper Lift Arm 5 (000000--- ) Hub, Splined 5 6996 (000000--- ) Washer 6 560 (000000--- ) Bearing, Center 7 5668 (000000--- ) Bearing, Journal 8 559 (000000--- ) Stud 9 56--- (000000--- ) Arm Assembly, Front Pivot, R.H. 0 5665 (000000--- ) Bearing, Journal 556 (000000--- ) Bearing, Journal 560--- (000000--- ) Arm Assembly, Front Pivot, L.H. 5665 (000000--- ) Bearing, Journal 556 (000000--- ) Bearing, Journal 5 565 (000000--- ) Washer 6 6 79 (000000--- ) Bearing, Thrust 6 7 5686 (000000--- ) Ring, Retaining, External 8 5666 (000000--- ) Bearing, Thrust 9 56 (000000--- ) Washer 0 (000000--- ) Nut, Slotted 8 (000000--- ) Chain and Eye Bolt Assembly 560 (000000--- ) Shaft, Splined, R.H. 566 (000000--- ) Shaft, Splined, L.H. 5 (000000--- ) Washer 6 5 8 (000000--- ) Shim 6 0759 (000000--- ) Fitting, Grease 6-7
MULTI-LEVEL DUMP MODEL PARTS 0 5 0 9 6 8 6 8 9 7 5 6 7 Hopper Lift Arm Fig. -- Hopper Group, Multi-Level Dump 6-8 E MM (9---89)
MULTI-LEVEL DUMP MODEL PARTS Fig. -- Hopper Group, Multi-Level Dump 05668 850 (000000--- ) Latch, Door 86 (000000--- ) Ring, Retaining 0759 (000000--- ) Fitting, Grease 8500 (000000--- ) Shaft, Latch 5 898 (000000--- ) Spring, Torsion 6 00 (000000--- ) Pin, Clevis 7 876 (000000--- ) Baffle, Lower 8 877 (000000--- ) Baffle, Upper 9 88 (000000--- ) Tube, Spacer 0 0668 (000000--- ) Hopper 8 (000000--- ) Screw, Socket 8 (000000--- ) Cam, Positioning 06--- (000000--- ) Grommet 695--- (000000--- ) Clamp, Cable 5 06--- (000000--- ) Grommet 6 897 (000000--- ) Spring, Torsion 7 70 (000000--- ) Lip, Side 8 5607 (000000--- ) Lip 5 9 5758 (000000--- ) Strip 0 86--- (000000--- ) Label, TENNANT Oval 5086 (000000--- ) Wire Harness, Hopper E MM (9---89) 6-9
MULTI-LEVEL DUMP MODEL PARTS Fig. -- Filter Carrier Group, Multi-Level Dump 05666 5085 (000000--- ) Carrier, Filter 507 (000000--- ) Bushing, Strain Relief 558 (000000--- ) Mount, Cable Tie 966 (000000--- ) Tie, Cable 6-0 E MM (9---89)
MULTI-LEVEL DUMP MODEL PARTS Hopper 7 5 7 6 6 5 5 5 0 9 8 7 Fig. 5 -- Hopper Door Assembly, Multi-Level Dump 05667 896 (000000--- ) Bumper 698 (000000--- ) Bracket, Door Latch 9 (000000--- ) Washer 5669 (000000--- ) Door Assembly, Hopper 556 (000000--- ) Door, Hopper 5 868 (000000--- ) Pin, Clevis 6 887 (000000--- ) Spring, Tension 7 707 (000000--- ) Shaft, Pivot 8 788--- (000000--- ) Ring, Retaining 9 890 (000000--- ) Cam, Follower 0 86 (000000--- ) Washer 707 (000000--- ) Brace, Hopper Door 6585 (000000--- ) Pin, Roll 068 (000000--- ) Screw, Socket 07--- (000000--- ) Pin, Clevis 5 7055 (000000--- ) Seal, Foam Rubber 6 705 (000000--- ) Seal, Foam Rubber 7 950 (000000--- ) Shim, Washer 6-
MULTI-LEVEL DUMP MODEL PARTS Fig. 6 -- Vacuum Fan Bracket Group, Multi-Level Dump 0558 6907--- (000000--- ) Adaptor, Hose 6- E MM (9---89)
MULTI-LEVEL DUMP MODEL PARTS Fig. 7 -- Front Wheels and Brake Group, Multi-Level Dump 05585 090 (000000--- ) Axle, Front 99 (000000--- ) Bushing, Sleeve E MM (9---89) 6-
MULTI-LEVEL DUMP MODEL PARTS Fig. 8 -- Main Brush Drive Group, Multi-Level Dump 05586 7 (000000--- ) Spring, Compression 5907 (000000--- ) Lever, Lift Handle 5899 (000000--- ) Clip, Lift Handle 6- E MM (9---89)
MULTI-LEVEL DUMP MODEL PARTS 5 Fig. 9 -- Side Brush Arm Assembly, Multi-Level Dump 05587 569 (000000--- ) Handle 8 (000000--- ) Arm Assembly, Side Brush 05 (000000--- ) Arm, Brush 87 (000000--- ) Bumper, Side Brush 08 (000000--- ) Bracket, Bumper Mount 5 87 (000000--- ) Bracket, Motor Mount 6-5
MULTI-LEVEL DUMP MODEL PARTS Fig. 5 Fig. Fig. Fig. Fig. 0 -- Hydraulic System, Multi-Level Dump 0567 (For machines below serial number 00506) 6-6
MULTI-LEVEL DUMP MODEL PARTS Fig. 5 Fig. Fig. Fig. Fig. -- Hydraulic System, Multi-Level Dump 0567 (For machines with serial number 00506 and above) E MM (5--- 9) 6-7
MULTI-LEVEL DUMP MODEL PARTS 5 8 5 9 0 8 8 0 6 6 7 7 7 9 5 Fig. -- Dump Cylinder and Valve Group, Multi-Level Dump 05588 5 (000000--- ) Pin, Clevis 788 (000000--- ) Ring, Retaining, External 788--- (000000--- ) Ring, Retaining, External 706 (000000--- ) Pin, Grooved 708 (000000--- ) Cylinder Assembly, Dump 5 08 (000000--- ) Cylinder, Dump 08 (000000--- ) Seal Kit 6 705 (000000--- ) Clevis 7 70 (000000--- ) Bearing, Journal 8 75 (000000--- ) Fitting, Elbow, 5 9 760 (000000--- ) Hose 0 558 (000000--- ) Hose 75 (000000--- ) Valve Assembly, Dump 5586 (000000--- ) Fitting, Tee 75 (000000--- ) Fitting, Restrictor 56690 (000000--- ) Fitting, Straight 868 (000000--- ) Fitting, Elbow 5 75 (000000--- ) Valve, Dump 0666 (000000--- ) Seal Kit 6 605 (000000--- ) Pin, Clevis 7 759 (000000--- ) Link, S 8 757 (000000--- ) Handle, Valve 9 890 (000000--- ) Bracket, Valve Mount 0 6565 (000000--- ) Knob 67 (000000--- ) Hose 6-8
MULTI-LEVEL DUMP MODEL PARTS 5 0 8 9 8 6 7 Fig. -- Main Control Valve and Hopper Lift Cylinder Group, Multi-Level Dump 05589 67 (000000--- ) Hose 58 (000000--- ) Fitting, Tee 0--- (000000--- ) Hose 788 (000000--- ) Ring, Retaining, External 5 555 (000000--- ) Pin, Grooved 6 9 (000000--- ) Pin, Grooved 90 (000000--- ) Cylinder Assembly, Lift 7 9 (000000--- ) Clevis Assembly 8 5688 (000000--- ) Bearing, Journal 9 898 (000000--- ) Cylinder, Lift 799 (000000--- ) Seal Kit 0 56690 (000000--- ) Fitting, Straight 7980 (000000--- ) Fitting, Elbow 75 (000000--- ) Fitting, Straight 99 (000000--- ) Fitting, Tee 6-9
MULTI-LEVEL DUMP MODEL PARTS Fig. -- Side Brush Motor Group, Multi-Level Dump 05590 680 (000000--- ) Fitting, Straight 550 (000000--- ) Tube Assembly, Hydraulic 6-0 E MM (5--- 9)
MULTI-LEVEL DUMP MODEL PARTS 5 6 7 Hydraulic Pump Gear Pump Fig. 5 -- Directional Control Group, Multi-Level Dump 0559 709 (000000--- ) Support, Connecting Rod 55 (000000--- ) Bearing, Flange 09088 (000000--- ) Pin, Clevis 890 (000000--- ) Cam Follower 5 56 (000000--- 00505) Rod, Control 6 6956 (000000--- ) Arm, Control 7 667 (00506--- ) Rod, Control 6-
MULTI-LEVEL DUMP MODEL PARTS 0 7 8 5 6 Fig. 6 -- Bumper Group, Multi-Level Dump 9 0559 6986 (000000--- ) Plate 895--- (000000--- ) Plate, End 6958 (000000--- ) Bumper, R.H. 699 (000000--- ) Pin, Grooved 5 788 (000000--- ) Ring, Retaining, External 6 705 (000000--- ) Bumper, R.H. 7 596 (000000--- ) Bumper, Corner, R.H. 8 59 (000000--- ) Bumper, Corner, L.H. 9 7050 (000000--- ) Bumper, L.H. 0 600 (000000--- ) Bumper, Rear 6-
MULTI-LEVEL DUMP MODEL PARTS 5 Fig. 7 -- Overhead Guard Group, Multi-Level Dump 056 6 (000000--- ) Guard, Top 77 (000000--- ) Leg, Front, R.H. 576 (000000--- ) Angle, Support 75 (000000--- ) Leg, Front, L.H. 5 66 (000000--- ) Support, Rear Guard 6-
MULTI-LEVEL DUMP MODEL PARTS 6-
CONTENTS EE MODEL PARTS SECTION 7 Page ORDERING REPAIR PARTS................ 7- Fig. --- Instrument and Component Panel Group, EE............... 7- NOTE: SECTION 7, EE MODEL PARTS, lists repair parts unique to an EE model machine. E MM (9---89) 7-
EE MODEL PARTS 7- E MM (9---89)
The components used in this machine have been carefully selected for performance and safety. Use only Tennant Company specified or equivalent parts. To receive prompt service in filling of your parts orders, please direct all orders for parts with Tennant Company part numbers to the Tennant Company, and all orders for parts with vendor part numbers to the local supplier of the respective vendor. When ordering parts, please furnish all of the following information:. Machine model number - shown on the machine data plate. SER.NO. GVW. LBS. KG. TENNANT COMPANY MINNEAPOLIS, MINNESOTA USA ORDERING REPAIR PARTS EE MODEL PARTS If the old part cannot be identified, send it to us with the quantity needed specified on the order. Any claim for loss or damage to a shipment in transit should be filed promptly against the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicate items back ordered. If parts received are suspected to be incorrect or defective, please write, wire, or phone the Tennant Company representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required. SERIAL NUMBER INFORMATION EXPLANATION Serial number listings are shown to indicate on which machines each part can be used. These listings are explained by the following examples: (000000--- ) The part can be used on all machines. (00--- ) The part can be used on all machines beginning with the serial number listed.. Machine serial number - shown on the machine data plate.. Power source - gasoline, LPG, diesel, electric.. Company name. 5. Shipping address. 6. Billing address. 7. Name, first and last - of person ordering parts. 8. Telephone number. 9. Purchase order number. 0. Part number, description, and quantity - of each item on the order.. Customer ID Number. Do not order parts by key number or the figure number of the illustrated parts. Indented items indicate parts of assemblies. Standard hardware is furnished only when part of a purchased assembly. Please get hardware from a local hardware supplier. (000000---000) The part can be used on all machines up to and including serial number listed. (00---005678) The part can be used on all machines between and including the serial numbers listed. Where xxxxxx s are listed in place of a serial number, it indicates a change was made but the exact serial number had not been established when the catalog went to press. SI UNITS OF MEASURE (INTERNATIONAL SYSTEM) Metric equivalents have been included, where applicable, throughout this parts catalog. FASTENER STRENGTH IDENTIFICATION Fasteners required to have high---strength qualities equivalent to SAE Grade 8 are identified throughout this catalog by the description GR 8. Unless identified by this description, all standard fasteners are SAE Grade 5. (Specifications and design subject to change without notice.) E MM (9---89) 7-
EE MODEL PARTS 5 6 Fig. -- Instrument and Component Panel Group, EE 0559 90 (000000--- ) Panel, Component 59 (000000--- ) Cover, Panel 57 (000000--- ) Plate, Front 5 (000000--- ) Panel, Instrument 5 55 (000000--- ) Plate, Back 6 088 (000000--- ) Label, EE 07 (000000--- ) Strainrelief (Multi-Level Dump Model only) 07 (000000--- ) Strainrelief (Low Dump Model only) 5 59 (000000--- ) Strainrelief 50 (000000--- ) Strainrelief 5 (000000--- ) Strainrelief 05 (000000--- ) Nut, Lock 6 87 (000000--- ) Nut, Lock 50--- (000000--- ) Plate, Hole Cover 56 (000000--- ) Wire Kit 55 (000000--- ) Cord Assembly 55 (000000--- ) Cord Assembly 555 (000000--- ) Wire Assembly 778--- (000000--- ) Plugbutton 67 (000000--- ) Wire Kit 67 (000000--- ) Cable Assembly, Motor 596 (000000--- ) Decal, Battery Required 557 (000000--- ) Switch, Micro 556 (000000--- ) Bracket, L 7-
EE MODEL PARTS 56 (000000--- ) Filter Box (Low Dump Model only) 95 (000000--- 005096) Band Kit, Motor Enclosure F/89 69 (005097--- ) Band Kit, Motor Enclosure 70 (000000--- ) Bumper (Multi-Level Dump Model only) 05 (000000--- ) End, Front Bumper (Multi-Level Dump Model only) 6955 (000000--- ) Guard, Side Brush Arm (Multi-Level Dump Model only) 07--- (000000--- ) Pin, Clevis (Multi-Level Dump Model only) 7-5
EE MODEL PARTS 7-6 E MM (9---89)
CONTENTS OPTIONS SECTION 8 Page ORDERING REPAIR PARTS................ 8- Fig. --- Revolving Light Kit................ 8- Fig. --- Revolving Light Kit, EE............ 8-5 Fig. --- Operating Light Kit, Lintel Mount, Low Dump.................... 8-6 Fig. --- Operating Light Kit, Lintel Mount, Multi-Level Dump.............. 8-7 Fig. 5 --- Operating Light Kit, Lintel Mount, EE 8-8 Fig. 6 --- Overhead Guard Kit............... 8-9 Fig. 7 --- Bumper Kit, Low Dump, (Prepped for Scrubbing)........ 8-0 Fig. 8 --- Bumper Kit, Low Dump, EE (Not Prepped for Scrubbing).... 8- Fig. 9 --- Bumper Kit, Low Dump, EE (Prepped for Scrubbing)........ 8- Fig. 0 --- Bumper Kit, Multi-Level Dump, EE.. 8- Fig. --- Prep For Scrub Kit................ 8- Fig. --- Detergent Distribution Group...... 8-5 Fig. --- Scrub Tank Frame Group.......... 8-6 Fig. --- Solution and Recovery Tanks Group 8-8 Fig. 5 --- Main Scrub Brush Drive Group..... 8-0 Fig. 6 --- Rear Squeegee Group............ 8- Fig. 7 --- Side Squeegee Group............ 8- Fig. 8 --- Hour Meter Kit, EE............... 8-5 Fig. 9 --- Charger Kit, PH................ 8-5 Fig. 0 --- Charger Kit, PH................ 8-5 Fig. --- Battery Group, EE................ 8-6 Fig. --- Battery Group, Wet............... 8-6 Fig. --- Battery Group, Dry (Export only)... 8-6 Fig. --- Motor Enclosure Band Kit......... 8-6 Fig. 5 --- Motor Enclosure Band Kit......... 8-6 Fig. 6 --- Motor Enclosure Band Kit......... 8-6 Fig. 7 --- Squeegee Blade Kit.............. 8-6 Fig. 8 --- Hopper Dolly Assembly, Low Dump 8-7 Fig. 9 --- Scrub Vacuum Fan Drive Group, EE 8-8 Fig. 0 --- Vacuum Fan Assembly, EE........ 8-0 Fig. --- Solution and Recovery Tanks Group, EE.................... 8- Fig. --- Main Scrub Brush Drive Group, EE. 8- Fig. --- Scrub Tank Frame Group, EE...... 8-6 Fig. --- Detergent Distribution Group, EE... 8-8 Fig. 5 --- Maximum Path Side Brush Group.. 8-9 NOTE: SECTION 8, OPTIONS, lists repair parts included as part of the available options. 8-
OPTIONS 8-
The components used in this machine have been carefully selected for performance and safety. Use only Tennant Company specified or equivalent parts. To receive prompt service in filling of your parts orders, please direct all orders for parts with Tennant Company part numbers to the Tennant Company, and all orders for parts with vendor part numbers to the local supplier of the respective vendor. When ordering parts, please furnish all of the following information:. Machine model number - shown on the machine data plate. SER.NO. GVW. LBS. KG. TENNANT COMPANY MINNEAPOLIS, MINNESOTA USA ORDERING REPAIR PARTS OPTIONS If the old part cannot be identified, send it to us with the quantity needed specified on the order. Any claim for loss or damage to a shipment in transit should be filed promptly against the transportation company making the delivery. Shipments will be complete unless the packing list or order acknowledgement indicate items back ordered. If parts received are suspected to be incorrect or defective, please write, wire, or phone the Tennant Company representative from whom you ordered the part. They will give authorization for return and/or handle replacement shipments when required. SERIAL NUMBER INFORMATION EXPLANATION Serial number listings are shown to indicate on which machines each part can be used. These listings are explained by the following examples: (000000--- ) The part can be used on all machines. (00--- ) The part can be used on all machines beginning with the serial number listed.. Machine serial number - shown on the machine data plate.. Power source - gasoline, LPG, diesel, electric.. Company name. 5. Shipping address. 6. Billing address. 7. Name, first and last - of person ordering parts. 8. Telephone number. 9. Purchase order number. 0. Part number, description, and quantity - of each item on the order.. Customer ID Number. Do not order parts by key number or the figure number of the illustrated parts. Indented items indicate parts of assemblies. Standard hardware is furnished only when part of a purchased assembly. Please get hardware from a local hardware supplier. (000000---000) The part can be used on all machines up to and including serial number listed. (00---005678) The part can be used on all machines between and including the serial numbers listed. Where xxxxxx s are listed in place of a serial number, it indicates a change was made but the exact serial number had not been established when the catalog went to press. SI UNITS OF MEASURE (INTERNATIONAL SYSTEM) Metric equivalents have been included, where applicable, throughout this parts catalog. FASTENER STRENGTH IDENTIFICATION Fasteners required to have high---strength qualities equivalent to SAE Grade 8 are identified throughout this catalog by the description GR 8. Unless identified by this description, all standard fasteners are SAE Grade 5. (Specifications and design subject to change without notice.) 098 8-
OPTIONS 5 7 6 Fig. -- Revolving Light Kit 0559 5 (000000--- ) Light Kit, Revolving, Amber 68--- (000000--- ) Light Assembly, Revolving, Amber 68--- (000000--- ) Lens, Amber 58 (000000--- ) Lamp 679 (000000--- ) Switch 07 (000000--- ) Fuse, 5 A 07 (000000--- ) Grommet 5 57 (000000--- ) Guard, Light 6 06--- (000000--- ) Grommet 7 5006 (000000--- ) Terminal, Connector 55 (000000--- ) Wire Kit, Revolving 897 (000000--- ) Decal, Lights 06---8 (000000--- ) Grommet 57 (000000--- ) Light Assembly, Revolving, Red 68 (000000--- ) Lens, Red 58 (000000--- ) Light Assembly, Revolving, Blue 68--- (000000--- ) Lens, Blue 8-
OPTIONS 9 8 7 6 0 5 Fig. -- Revolving Light Kit, EE 056 55 (000000--- ) Light Kit, Revolving, Amber 57 (000000--- ) Guard, Light 68--- (000000--- ) Light Assembly, Revolving, Amber 68--- (000000--- ) Lens, Amber 58 (000000--- ) Lamp 07 (000000--- ) Grommet 0985 (000000--- ) Clamp, Cable 5 575 (000000--- ) Cord Assembly 6 07 (000000--- ) Strainrelief 7 05 (000000--- ) Nut, Lock 8 569 (000000--- ) Cord Assembly 9 55 (000000--- ) Wire Kit 0 679 (000000--- ) Switch 07 (000000--- ) Fuse, 5 A 897 (000000--- ) Decal, Lights 57 (000000--- ) Light Assembly, Revolving, Red 68 (000000--- ) Lens, Red 58 (000000--- ) Light Assembly, Revolving, Blue 68--- (000000--- ) Lens, Blue 8-5
OPTIONS 9 6 5 8 0 7 5 6 Fig. -- Operating Light Kit, Lintel Mount, Low Dump 0566 560 (000000--- ) Light Kit, Operating 58 (000000--- ) Spotlight Assembly 58 (000000--- ) Lamp 5 (000000--- ) Guard, Spotlight 58 (000000--- ) Mount, Spotlight 565 (000000--- ) Headlight Assembly 5 7 (000000--- ) Washer, Dished 6 55 (000000--- ) Bracket,Headlight 7 568 (000000--- ) Plate, Mount 8 679 (000000--- ) Switch 9 07 (000000--- ) Fuse, 5 A 0 50 (000000--- ) Bracket,Taillight 566 (000000--- ) Taillight Assembly 575 (000000--- ) Lamp 589 (000000--- ) Light Assembly, Panel 590 (000000--- ) Lamp 0756 (000000--- ) Nut, Wire 570 (000000--- ) Wire Kit 057 (000000--- ) Grommet 06---8 (000000--- ) Grommet 897 (000000--- ) Label, Lights 0985 (000000--- ) Clamp, Cable 07 (000000--- ) Grommet 8-6
OPTIONS 0 8 9 5 7 6 5 Fig. -- Operating Light Kit, Lintel Mount, Multi-Level Dump 0579 5790 (000000--- ) Light Kit, Operating 5789 (000000--- ) Spotlight 5787 (000000--- ) Guard, Spotlight 5687 (000000--- ) Socket, Lamp 565 (000000--- ) Headlight Assembly 5 55 (000000--- ) Bracket, Headlight 6 568 (000000--- ) Plate, Mount 7 679 (000000--- ) Switch 8 07 (000000--- ) Fuse, 5 A 9 50 (000000--- ) Bracket, Taillight 0 566 (000000--- ) Taillight Assembly 575 (000000--- ) Lamp 589 (000000--- ) Light Assembly, Panel 590 (000000--- ) Lamp 7 (000000--- ) Washer, Dished 8 0756 (000000--- ) Nut, Wire 570 (000000--- ) Wire Kit 057 (000000--- ) Grommet 5690 (000000--- ) Grommet 897 (000000--- ) Decal, Lights 0985 (000000--- ) Clamp, Cable 07 (000000--- ) Grommet 5788 (000000--- ) Wire Assembly 8-7
OPTIONS 0 8 9 5 7 6 5 Fig. 5 -- Operating Light Kit, Lintel Mount, EE 0570 508 (000000--- ) Light Kit, Operating 58 (000000--- ) Spotlight Assembly 58 (000000--- ) Lamp 5 (000000--- ) Guard, Spotlight 58 (000000--- ) Mount, Spotlight 565 (000000--- ) Headlight Assembly 5 55 (000000--- ) Bracket,Headlight 6 568 (000000--- ) Plate, Mount 7 679 (000000--- ) Switch 8 07 (000000--- ) Fuse, 5 A 9 50 (000000--- ) Bracket,Taillight 0 566 (000000--- ) Taillight Assembly 575 (000000--- ) Lamp 057 (000000--- ) Grommet 57 (000000--- ) Wire Kit 56 (000000--- ) Wire Assembly 7 (000000--- ) Wire Harness 57 (000000--- ) Cord Assembly 7 (000000--- ) Washer, Dished 0985 (000000--- ) Clamp, Cable 07 (000000--- ) Grommet 07 (000000--- ) Strainrelief 05 (000000--- ) Nut, Lock 5 (000000--- ) Terminal, Female 897 (000000--- ) Decal, Lights 8-8
OPTIONS 8 6 5 7 8 5 Fig. 6 -- Overhead Guard Kit 057 5575 (000000--- ) Guard Kit, Overhead 6 (000000--- ) Guard, Top 77 (000000--- ) Leg, Front, R.H. 75 (000000--- ) Leg, Front, L.H. 66 (000000--- ) Support,Rear 5 55 (000000--- ) Plate, Front, Base 6 577 (000000--- ) Bracket, R.H. (Low Dump only) 7 578 (000000--- ) Bracket, L.H. (Low Dump only) 8 576 (000000--- ) Angle, Support, (Multi---Level Dump only) 8-9
OPTIONS 0 9 8 7 6 5 Fig. 7 -- Bumper Kit, Low Dump (Prepped for Scrubbing) 079 777 (000000--- ) Bumper Kit, Low Dump 596 (000000--- ) Bumper, Corner, R.H. 600 (000000--- ) Bumper, Rear 59 (000000--- ) Bumper, Corner, L.H. 599 (000000--- ) Bumper, Side, L.H. 5 60 (000000--- ) Bumper Assembly, Front 6 889 (000000--- ) Bracket,L 7 597 (000000--- ) Bumper, Side, R.H. 780 (000000--- ) Chain Assembly 8 89 (000000--- ) Bolt, Eye 9 778 (000000--- ) Tube, Chain Cover 0 777 (000000--- ) Chain 097 (000000--- ) Hook 08 (000000--- ) Tip, Rubber 59 (000000--- ) Label, Hazard---Raised Bumper 8-0
OPTIONS 0 9 8 7 6 5 Fig. 8 -- Bumper Kit, Low Dump, EE (Not Prepped for Scrubbing) 057 59 (000000--- ) Bumper Kit, Low Dump 596 (000000--- ) Bumper, Corner, R.H. 600 (000000--- ) Bumper, Rear 59 (000000--- ) Bumper, Corner, L.H. 599 (000000--- ) Bumper, Side, L.H. 5 65 (000000--- ) Bumper Assembly, Front 6 889 (000000--- ) Bracket,L 7 597 (000000--- ) Bumper, Side, R.H. 780 (000000--- ) Chain Assembly 8 89 (000000--- ) Bolt, Eye 9 778 (000000--- ) Tube, Chain Cover 0 777 (000000--- ) Chain 097 (000000--- ) Hook 08 (000000--- ) Tip, Rubber 8-
OPTIONS 0 9 8 7 6 5 Fig. 9 -- Bumper Kit, Low Dump, EE (Prepped for Scrubbing) 079 777--- (000000--- ) Bumper Kit, Low Dump 596 (000000--- ) Bumper, Corner, R.H. 600 (000000--- ) Bumper, Rear 59 (000000--- ) Bumper, Corner, L.H. 599 (000000--- ) Bumper, Side, L.H. 5 60--- (000000--- ) Bumper Assembly, Front 6 889 (000000--- ) Bracket,L 7 597 (000000--- ) Bumper, Side, R.H. 780 (000000--- ) Chain Assembly 8 89 (000000--- ) Bolt, Eye 9 778 (000000--- ) Tube, Chain Cover 0 777 (000000--- ) Chain 097 (000000--- ) Hook 08 (000000--- ) Tip, Rubber 59 (000000--- ) Label, Hazard---Raised Bumper 8-
OPTIONS 5 6 7 8 0 9 Fig. 0 -- Bumper Kit, Multi-Level Dump, EE 0575 705 (000000--- ) Bumper Kit, Multi-Level Dump 896 (000000--- ) Bumper, Front 6986 (000000--- ) Plate 895--- (000000--- ) Plate, End 6958 (000000--- ) Bumper, R.H. 5 699 (000000--- ) Pin, Grooved 6 788 (000000--- ) Ring, Retaining, External 7 705 (000000--- ) Bumper, R.H. 8 596 (000000--- ) Bumper, Corner, R.H. 9 59 (000000--- ) Bumper, Corner, L.H. 0 7050 (000000--- ) Bumper, L.H. 600 (000000--- ) Bumper, Rear 8-
OPTIONS 9 7 8 5 6 Fig. -- Prep For Scrub Kit 0576 0888 (000000--- ) Prep For Scrub Kit 070 (000000--- ) Switch 07 (000000--- ) Plate, Switch 609 (000000--- ) Extension, Side Brush Arm 790 (000000--- ) Resistor 5 6687 (000000--- ) Bracket,Connector 6 508A (000000--- ) Tire and Wheel Assembly 507A (000000--- ) Tire 7 505 (000000--- ) Contactor 8 5 (000000--- ) Wire Harness 9 5 (000000--- ) Relay 090 (000000--- ) Fuse, 60 A 59 (000000--- ) Wire Kit 98 (000000--- ) Holder, Fuse 587 (000000--- ) Fuse, 0 A 9 (000000--- ) Holder, Fuse 06--- (000000--- ) Grommet, Rubber 90 (000000--- ) Label, Scrubber Vac, Scrubber Brush 5006 (000000--- ) Terminal, Connector 8-
OPTIONS 5 7 9 6 0 8 8 8 7 5 0 8 6 5 6 Fig. -- Detergent Distribution Group 0560 NOTE: Scrub Attachment, TENNANT Part Number 68, includes Fig., Fig., Fig., and Fig. 5. 558A (000000--- ) Cable Assembly 557A (000000--- ) Cable Assembly 0909--- (000000--- ) Clamp, Hold-Down 668 (000000--- ) Clamp, Cable 5 880 (000000--- ) Support,Valve 6 (000000--- ) Swivel 7 7--- (000000--- ) Elbow 8 5 (000000--- ) Clamp, Worm Drive 8 9 587---6 (000000--- ) Hose, Vinyl 0 79 (000000--- ) Valve Assembly 76 (000000--- ) Elbow 77 (000000--- ) Hose, Vinyl 59 (000000--- ) Divider Assembly 507 (000000--- ) Hanger 5 506 (000000--- ) Tube, Spreader 6 (000000--- ) Elbow 7 9867 (000000--- ) Fitting Assembly, Elbow 560 (000000--- ) Clamp, Cable 887 (000000--- ) Strip, Water Valve Support 890 (000000--- ) Hose, Vinyl,.75 Long 90 (000000--- ) Clamp, Conduit, 0.50 Dia. 8-5
OPTIONS 5 5 6 9 9 8 7 0 8 9 8 7 8 9 0 6 9 6 9 0 6 7 7 5 6 9 0 9 8 5 7 Fig. -- Scrub Tank Frame Group 8-6
OPTIONS Fig. -- Scrub Tank Frame Group 0577 NOTE: Scrub Attachment, TENNANT Part Number 68, includes Fig., Fig., Fig., and Fig. 5. 079 (000000--- ) Panel and Label Assembly, Access 87 (000000--- ) Lid 56 (000000--- ) Frame, Main 0 (000000--- ) Chain 5 6 (000000--- ) Hook, S 6 660 (000000--- ) Front Leg Assembly 7 00 (000000--- ) Bracket, Pin 8 08A (000000--- ) Spring, Compression 9 9 (000000--- ) Pin, Threaded 9 (000000--- ) Screw, Set 0 060 (000000--- ) Pin, Roll 6565 (000000--- ) Knob 66 (000000--- ) Caster 9 (000000--- ) Support, L.H. 559 (000000--- ) Bumper 5 09 (000000--- ) Support 6 66 (000000--- ) Rear Leg Assembly 7 66 (000000--- ) Caster 8 6565 (000000--- ) Knob 9 00 (000000--- ) Bracket, Pin 0 08A (000000--- ) Spring, Compression 9 (000000--- ) Pin, Threaded 060 (000000--- ) Pin, Roll 9 (000000--- ) Screw, Set 08 (000000--- ) Fitting, Grease 6065 (000000--- ) Bushing, Sleeve 5 005 (000000--- ) Support, Trough 6 568 (000000--- ) Shield, Spray 7 00 (000000--- ) Trough, Pickup 676 (000000--- ) Decal, Scrubber 0 (000000--- ) Decal, Horn Blows 566 (000000--- ) Decal, Water Control 687 (000000--- ) Decal, Detergent Recommended 695 (000000--- ) Decal, Scrubbing Instructions 88 (000000--- ) Label, Scrub Vac Fan Filter 8 560 (000000--- ) Cover, Motor 9 609 (000000--- ) Sleeve 8-7
OPTIONS 6 8 7 9 6 0 5 7 5 7 6 5 6 7 8 5 6 9 0 7 5 6 7 8 9 0 Fig. -- Solution and Recovery Tanks Group 8-8
OPTIONS Fig. -- Solution and Recovery Tanks Group 0578 NOTE: Scrub Attachment, TENNANT Part Number 68, includes Fig., Fig., Fig., and Fig. 5. 8 (000000--- ) Gasket, Lid 56A (000000--- ) Basket, Soap 677 (000000--- ) Tank, Solution 056 (000000--- ) Flange 5 5 (000000--- ) Washer, Nylon 6 06 (000000--- ) Gasket 7 057 (000000--- ) Connector 8 05 (000000--- ) Plug 9 6907 (000000--- ) Hose and Cuff Assembly, Vinyl 06 (000000--- ) Cuff, Hose 0 --- (000000--- ) Bracket, Tank, Mounting, R.H. --- (000000--- ) Bracket, Tank, Mounting, L.H. 5 (000000--- ) Clamp,Worm Drive 67 (000000--- ) Tank, Recovery 6690A (000000--- ) Motor,Vacuum, 6 V 5 690 (000000--- ) Door Assembly, Clean Out 6 68 (000000--- ) Seal, Door 7 680 (000000--- ) Cam, Locking 8 97 (000000--- ) Nut, Wing 9 07 (000000--- ) Hose and Cuff Assembly 0 6688 (000000--- ) Sleeve 677 (000000--- ) Tube, Tank Locating 55 (000000--- ) Gasket 5689 (000000--- ) Guide,Float 70 (000000--- ) Float,Ball 5 776 (000000--- ) Collar, Float 6 6756 (000000--- ) Bolt, J 7 778--- (000000--- ) Cannister Assembly, Vacuum Fan Filter 8 55 (000000--- ) Gasket 9 865 (000000--- ) Fastener 0 779 (000000--- ) Gasket, Vacuum Fan Filter 7789A (000000--- ) Element, Filter 7790 (000000--- ) Screen, Filter 7787--- (000000--- ) Cover Assembly, Filter 5656 (000000--- ) Screw, Thumb 5 605 (000000--- ) Fastener 6 7788 (000000--- ) Seal, Foam Rubber 7 779 (000000--- ) Seal, Foam Rubber 685 (000000--- ) Bolt, J, Long 8-9
OPTIONS 8 7 0 9 5 5 5 7 9 9 8 6 5 6 7 8 6 7 6 0 5 5 Fig. 5 -- Main Scrub Brush Drive Group 8-0
OPTIONS Fig. 5 -- Main Scrub Brush Drive Group 0579 NOTE: Scrub Attachment, TENNANT Part Number 68, includes Fig., Fig., Fig., and Fig. 5. TENNANT Scrub Attachment 0 (000000--- ) Clevis, Adjustable (000000--- ) Pin, Clevis 9 (000000--- ) Nut, Wheel 778--- (000000--- ) Plugbutton 5 0706 (000000--- ) Sleeve 6 6 (000000--- ) Arm, Brush 7 690 (000000--- ) Bearing,Ball 8 06 (000000--- ) Ring, Retaining, Internal 9 6065 (000000--- ) Bushing 0 0707 (000000--- ) Plug, Brush 57 (000000--- ) Pin, Roll 668 (000000--- ) Plug, Brush Drive 588 (000000--- ) Motor and Harness, Drive 669B (000000--- ) Motor, Electric (See Electrical Components) 556 (000000--- ) Wire Kit 570 (000000--- ) Shim, 0.08 (.0 mm) 57 (000000--- ) Shim, 0.06 (.5 mm) 57 (000000--- ) Shim, 0.0 (.0 mm) 57 (000000--- ) Shim, 0.0 (0.5 mm) 667 (000000--- ) Reducer,Gear 5 6605 (000000--- ) Block, Bearing 6 6 (000000--- ) Bushing,Flange 7 66--- (000000--- ) Shim 66--- (000000--- ) Shim 8 65 (000000--- ) Absorber, Shock 9 65 (000000--- ) Sleeve 0 656 (000000--- ) Strip 656 (000000--- ) Knob 6699 (000000--- ) Stop, Lift Rod 559 (000000--- ) Handle, Lift Brush 086 (000000--- ) Crank 5 50 (000000--- ) Clevis 6 69 (000000--- ) Arm and Shaft, Brush, L.H. 7 6 (000000--- ) Stud, Wheel 8 6698 (000000--- ) Stud 780 (000000--- ) Pad, Neoprene 9 68 (000000--- ) Shim, 0.005 (0. mm) 9 68--- (000000--- ) Shim, 0.00 (0. mm) 999--- (000000--- ) Pin, Roll, 0.5 Dia. Long 8-
OPTIONS 5 6 8 6 7 8 7 9 5 7 5 6 9 0 5 5 9 0 0 6 7 9 0 9 0 9 5 0 Fig. 6 -- Rear Squeegee Group 9 8-
OPTIONS Fig. 6 -- Rear Squeegee Group 0570 NOTE: Squeegee and Controls Kit, TENNANT Part Number 70, includes Fig. 6 and Fig. 7. 656 (000000--- ) Knob 8 (000000--- ) Lift Lever and Support Assembly 77 (000000--- ) Handle 6065 (000000--- ) Bushing,Sleeve 77 (000000--- ) Crank, Lift 5 776 (000000--- ) Support 6 775 (000000--- ) Bracket,Stop Adjustment 7 (000000--- ) Pin, Clevis 8 0 (000000--- ) Clevis, Adjustable 9 80 (000000--- ) Piston and Rod Assembly 0 69 (000000--- ) Ring, Retaining, Internal 5 (000000--- ) Tube, Spring 6 (000000--- ) Washer, Nylon 9557 (000000--- ) Pin, Clevis 906 (000000--- ) Pin, Hair Cotter 6 (000000--- ) Spring, Compression 5 067A (000000--- ) Pin, Clevis 6 977 (000000--- ) Screw, Set 7 780 (000000--- ) Link, Squeegee 7 (000000--- ) Squeegee Assembly, Rear 8 0786 (000000--- ) Nozzle, Suction 9 6 (000000--- ) Retainer 6 0 (000000--- ) Retainer (000000--- ) Blade, Front 788 (000000--- ) Frame, Squeegee 600 (000000--- ) Blade, Squeegee (000000--- ) Blade, Back Up, Neoprene 5 077 (000000--- ) Hose and Cuff Assembly, Vinyl 6 7795--- (000000--- ) Strap, Rubber 7 7 (000000--- ) Clip, Finger Grip 9 (000000--- ) Cam, Pan Lock 8-
OPTIONS 5 6 7 9 0 8 Fig. 7 -- Side Squeegee Group 057 NOTE: Squeegee and Controls Kit, TENNANT Part Number 70, includes Fig. 6 and Fig. 7. 08A (000000--- ) Spring, Compression 0 (000000--- ) Channel 99 (000000--- ) Pin 97 (000000--- ) Support,Squeegee 5 59 (000000--- ) Catch 6 99 (000000--- ) Bracket,Clip 667 (000000--- ) Side Brush Squeegee Assembly 7 500 (000000--- ) Chain 8 7 (000000--- ) Link 9 95 (000000--- ) Link 0 9 (000000--- ) Support,Squeegee, Back 55 (000000--- ) Pin, Clevis, Special 90 (000000--- ) Pin, Clevis 600 (000000--- ) Blade, Squeegee 9 (000000--- ) Retainer 8-
OPTIONS Fig. 8 -- Hour Meter Kit, EE 0569 506 (000000--- ) Hour Meter Kit, EE 58 (000000--- ) Meter, Engine Hour 888 (000000--- ) Dampener 07 (000000--- ) Fuse, 5 A 880 (000000--- ) Wire Kit 569 (000000--- ) Cord Assembly 07 (000000--- ) Strainrelief 05 (000000--- ) Nut, Lock 76 (000000--- ) Decal, 5 A, Label Fig. 9 -- Charger Kit, PH 057 06 (000000--- ) Charger Kit, PH Fig. 0 -- Charger Kit, PH 057 08 (000000--- ) Charger Kit, PH 8-5
OPTIONS Fig. -- Battery Group, EE 0569 50 (000000--- ) Battery Set, Wet, EE 979 (000000--- ) Battery, R.H. 7985 (000000--- ) Connector, Orange 978 (000000--- ) Battery, L.H. 7985 (000000--- ) Connector, Orange Fig. -- Battery Group, Wet 0569 59 (000000--- ) Battery, 8 V---600 A/H, Wet 7985 (000000--- ) Connector, Orange Fig. -- Battery Group, Dry (Export only) 05695 558 (000000--- ) Battery, 8 V---600 A/H, Dry 7985 (000000--- ) Connector, Orange Fig. -- Motor Enclosure Band Kit 05696 95 (000000--- ) Band Kit, Motor Enclosure F/89 Fig. 5 -- Motor Enclosure Band Kit 079 605 (000000--- ) Band Kit, Motor Enclosure F/50089 Fig. 6 -- Motor Enclosure Band Kit 079 69 (000000--- ) Band Kit, Motor Enclosure EE Fig. 7 -- Squeegee Blade Kit 057 78 (000000--- ) Squeegee Blade Kit 709 (000000--- ) Blade, Squeegee, 69.5 Long 70 (000000--- ) Blade, Squeegee, 6 Long 8-6
OPTIONS Fig. 8 -- Hopper Dolly Assembly, Low Dump 059 7 (000000--- ) Dolly Assembly, Hopper 5 (000000--- ) Dolly, Hopper 9 (000000--- ) Socket, Caster 59A (000000--- ) Caster 8-7
OPTIONS 6 5 0 7 9 8 Fig. 9 -- Scrub Vacuum Fan Drive Group, EE 8-8
OPTIONS Fig. 9 -- Scrub Vacuum Fan Drive Group, EE 0575 NOTE: EE Rated Scrub Attachment, TENNANT Part Number 50, includes Fig. 9, Fig. 0, Fig., Fig., Fig., and Fig.. 0886 (000000--- ) Cover, Fan Drive 56 (000000--- ) Arm, Idler 698 (000000--- ) Spring, Tension 000 (000000--- ) Ring, Retaining, Internal 5 085 (000000--- ) Bearing,Ball 6 50 (000000--- ) Pulley, Idler 7 05 (000000--- ) Ring, Retaining, External 8 58 (000000--- ) Baffle 9 659 (000000--- ) V---belt 0 0887 (000000--- ) Sheave 509 (000000--- ) Plate, Mounting 67 (000000--- ) Tube 866 (000000--- ) Dampener, Radiator 6 5985 (000000--- ) Motor, Electric (See Electrical Components) 7690 (000000--- ) Sleeve 8-9
OPTIONS 5 6 7 5 6 8 8 5 9 0 9 0 7 9 7 Fig. 0 -- Vacuum Fan Assembly, EE 8-0
OPTIONS Fig. 0 -- Vacuum Fan Assembly, EE 0576 NOTE: EE Rated Scrub Attachment, TENNANT Part Number 50, includes Fig. 9, Fig. 0, Fig., Fig., Fig., and Fig.. 59 (000000--- ) Vacuum Fan Assembly 57 (000000--- ) Shaft Assembly, Vacuum Fan 6088 (000000--- ) Washer 5 (000000--- ) Sheave, Blank 55 (000000--- ) Shaft, Fan 56--- (000000--- ) Sleeve 5 085 (000000--- ) Bearing, Ball 6 5 (000000--- ) Tab, Bearing 7 55 (000000--- ) Hub, Fan 8 56 (000000--- ) Tube 9 000 (000000--- ) Ring, Retaining, Internal 0 59 (000000--- ) Spacer 50A (000000--- ) Fan, Rotating 5A (000000--- ) Fan, Shell 5 (000000--- ) Spacer 58A (000000--- ) Fan, Stationary 5 5A (000000--- ) Fan, Stationary 6 5 (000000--- ) Washer 7 780 (000000--- ) Pad, Neoprene 8 59--- (000000--- ) Plate Assembly 9 555 (000000--- ) Clamp, Worm Drive 0 555 (000000--- ) Hose 79 (000000--- ) Box, Vacuum 55 (000000--- ) Gasket 8-
OPTIONS 5 6 7 8 5 7 0 6 9 5 0 8 6 7 9 Fig. -- Solution and Recovery Tanks Group, EE 8-
OPTIONS Fig. -- Solution and Recovery Tanks Group, EE 0577 NOTE: EE Rated Scrub Attachment, TENNANT Part Number 50, includes Fig. 9, Fig. 0, Fig., Fig., Fig., and Fig.. 8 (000000--- ) Gasket, Lid 56A (000000--- ) Basket, Soap 677 (000000--- ) Tank, Solution 056 (000000--- ) Flange 5 5 (000000--- ) Washer, Nylon 6 06 (000000--- ) Gasket 7 057 (000000--- ) Connector 8 05 (000000--- ) Plug 9 6907 (000000--- ) Hose, Drain 0 --- (000000--- ) Bracket, Tank Mounting, R.H. --- (000000--- ) Bracket, Tank Mounting, L.H. 5 (000000--- ) Clamp,Worm Drive 67 (000000--- ) Tank, Recovery 690 (000000--- ) Door Assembly, Clean Out 5 68 (000000--- ) Seal, Door 6 680 (000000--- ) Cam, Locking 7 97 (000000--- ) Nut, Wing 8 07 (000000--- ) Hose and Cuff Assembly, Vinyl 9 6688 (000000--- ) Sleeve 0 677 (000000--- ) Tube, Tank Locating 55 (000000--- ) Gasket 5689 (000000--- ) Guide,Float 70 (000000--- ) Float,Ball 685 (000000--- ) Bolt, J, long 776 (000000--- ) Collar, Float 5 (000000--- ) Bracket, L 8-
OPTIONS 8 7 0 9 5 5 5 7 9 9 8 6 5 6 7 8 6 7 6 0 5 5 Fig. -- Main Scrub Brush Drive Group, EE 8-
OPTIONS Fig. -- Main Scrub Brush Drive Group, EE 0578 NOTE: EE Rated Scrub Attachment, TENNANT Part Number 50, includes Fig. 9, Fig. 0, Fig., Fig., Fig., and Fig.. 0 (000000--- ) Clevis, Adjustable (000000--- ) Pin, Clevis 9 (000000--- ) Nut, Wheel 778--- (000000--- ) Plugbutton 5 0706 (000000--- ) Sleeve 6 6 (000000--- ) Arm, Brush 7 690 (000000--- ) Bearing,Ball 8 06 (000000--- ) Ring, Retaining, Internal 9 6065 (000000--- ) Bushing 0 0707 (000000--- ) Plug, Brush 57 (000000--- ) Pin, Roll 668 (000000--- ) Plug, Brush Drive 57 (000000--- ) Motor Assembly, Scrub Brush Drive 669B (000000--- ) Motor, Electric (See Electrical Components) 56 (000000--- ) Wire Kit 570 (000000--- ) Shim, 0. (.8 mm) 57 (000000--- ) Shim, 0.06 (.5 mm) 57 (000000--- ) Shim, 0.0 (.0 mm) 57 (000000--- ) Shim, 0.0 (0.5 mm) 667 (000000--- ) Reducer,Gear 5 6605 (000000--- ) Block, Bearing 6 6 (000000--- ) Bushing,Flange 7 66--- (000000--- ) Shim 66--- (000000--- ) Shim 8 65 (000000--- ) Absorber, Shock 9 65 (000000--- ) Sleeve 0 656 (000000--- ) Strip 656 (000000--- ) Knob 6699 (000000--- ) Stop, Lift Rod 559 (000000--- ) Handle, Lift Brush 086 (000000--- ) Crank 5 50 (000000--- ) Clevis 6 69 (000000--- ) Arm and Shaft, Brush, L.H. 7 6 (000000--- ) Stud, Wheel 8 6698 (000000--- ) Stud 780 (000000--- ) Pad, Neoprene 9 68 (000000--- ) Shim, 0.005 (0. mm) 9 68--- (000000--- ) Shim, 0.00 (0. mm) 999--- (000000--- ) Pin, Roll, 0.5 Dia. Long 8-5
OPTIONS 5 5 6 9 9 8 7 0 8 9 8 7 8 9 0 6 0 9 6 9 0 6 7 7 5 6 9 0 9 8 5 7 Fig. -- Scrub Tank Frame Group, EE 8-6