CM Entertainment Catalogue 2015v3_Layout 1 09/03/ :21 Page 1

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 1 PRODUCT CATALOGUE COLUMBUS McKINNON CORPORATION ENTERTAINMENT PRODUCTS 2015

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 2 Columbus McKinnon Entertainment Technology (CM-ET), the industry leader in providing quality lifting and positioning equipment for riggers around the globe, presents the new Lodestar electric chain hoist. Generations of users have relied on the Lodestar motor for consistent operation and long-life for years, and now more new features have been added to widen the appeal of the Lodestar to the next generation of rigging professionals. In addition to a product line recognised in venues throughout the world, CM-ET has established a network of distributors that provide the highest level of customer service to users in the industry. Wherever the show takes place, a knowledgeable CM-ET distributor is available to offer assistance with parts, service, or accessories. When searching for products or services to ensure that your event shines, turn to the company with more than 135 years of experience in meeting the needs of our customers - Columbus McKinnon.. Lodestar... 4 Lodestar D8+... 8 Lodestar BGV-C1... 9 Prostar... 10 Winches... 11 Manual hoists... 14 Trolleys & clamps... 16 Stage rigging slings... 17 Accessories... 18

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 3

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 4 The Rigger s Choice Specs CAPACITIES 125kg up to 2 tonne LIFT 19mtr standard (other lifts available) SPEEDS 1.5 to 30 mtr/min VOLTAGES 1-phase & 3-phase available NEW FEATURES ON THIS NEXT GENERATION OF LODESTAR 5 POCKET LIFTWHEEL IMPROVED CHAIN WEAR & SMOOTH LIFTING CLUTCH OUTSIDE GEAR TRAIN MEETS INTERNATIONAL STANDARDS PRECISION HELICAL GEARING FOR QUIETER OPERATION REDESIGNED CONTROL PANEL FOR EASIER ACCESS STANDARD FEATURES OPTIONAL FEATURES HEAVY DUTY DC BRAKE Designed for a long service life, the brake location allows for quick access & easy inspection. LOW VOLTAGE CONTROL 110v for long cable runs without voltage drop. 24v & 48v optional. (Low voltage unit only) DURABLE & LIGHTWEIGHT HOUSING Cast aluminum. Black powder coated finish for low visibility. GEARING Helical design for long wear life and smooth operation. LOAD CHAIN Designed and manufactured by Columbus McKinnon. Zinc plated to protect against corrosion. Optional black finish available. DUTY CYCLE H-4 duty rated for heavy duty application. 2M+ FEM class. 50% Duty cycle or 300 on/off per hour. ELECTRICAL Finger safe wiring meets all electrical codes. Quick change plugs allow for voltages 208v through to 460v. Prevents improper voltage connections which can cause hoist damage. (Low voltage unit only) ADJUSTABLE LIMIT SWITCH Adjustable screw limit switch that will automatically stop the hook at any predetermined point when either lifting or lowering, preventing overtravel. (Low voltage unit only) OVERLOAD PROTECTOR Designed to prevent lifting of excessive overloads. Helps prevent lifting of dangerous overloads. METRIC RATED MEETS REQUIREMENTS Meets or exceeds world standards. ROAD READY Easy to stow and travel. LIFETIME WARRANTY The industry s best. Subject to terms and conditions. DOUBLE DC BRAKE Two independently acting DC brakes for redundant braking. Field installation kit available. AC ELECTRIC BRAKE ENCODERS AVAILABLE Incremental & Absolute. CHAIN BAGS Cloth type bags easy-to-mount. VARIABLE SPEED UNITS AVAILABLE ALLOY LATCHLOK HOOKS Remains locked until released by the operator, even if chain goes slack. DIRECT CONTROL UNIT OPTION The CM Lodestar is available as a direct control unit. Featuring a single cable, this direct control unit can be used as part of a system with multiple units with a single control. The Lodestar is compatible with most direct control motor controllers. 4

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 5 5

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 6 LODESTAR Specifications, dimensions & key components DIMENSIONS drawing legend d8 d8+ d8 & d8+ d8 & d8+ series series series series BGV-C1 series A, AA, B, C, A, AA, B, C J, L, LL JJ, R, F L, LL JJ, RR E, F, H E, F, H RR, RT Varistar B Body height 15.4cm 15.4cm 19.4cm 19.4cm 19.4cm 19.4cm 19.4 C Hook thickness: side 1.7cm 1.7cm 2.2cm 2.9cm 1.7cm 2.2cm 2.9cm D Housing: brake side 29.7cm 29.7cm 25.3cm 25.3cm 29.7cm 25.3cm 25.3cm F Housing: motor side 22.5cm 22.5cm 32.9cm 32.9cm 22.5cm 32.9cm 32.9cm H Hook thickness: height 2.5cm 2.5cm 3cm 3.8cm 2.5cm 3cm 3.8cm I Housing: side left 10.7cm 10.7cm 14.5cm 17.9cm 10.7cm 14.5cm 17.9cm J Housing: side left 11.3cm 11.3cm 17.6cm 14.2cm 11.3cm 17.6cm 14.2cm M Hook opening 2.5cm 2.5cm 2.8cm 3.3cm 2.5cm 2.8cm 3.3cm P Body height with suspension 16.8cm 16.8cm 20.8cm 20.8cm 16.8cm 20.8cm 20.8cm SPECIFICATIONS d8 Type Rate Standard Operating Single FEM FEM duty Chain Load Power Reeves Motor Protection Noise capacity lifting voltage phase class factor weight chain consumption falls HP class level speed voltage per metre EN 818-7 -full load of chain at 50Hz lift-ewl Model B 250kg 4m/min 400-3-50 optional 2M 50% 0.89kg 6.3 x 18.9 1.1A 1 1/4 HP IP 55 73 db (A) Model C 250kg 8m/min 400-3-50 optional 2M 50% 0.89kg 6.3 x 18.9 1.2A 1 1/2 HP IP 55 73 db (A) Model F 500kg 4m/min 400-3-50 optional 2M 50% 0.89kg 6.3 x 18.9 1.2A 1 1/2 HP IP 55 73 db (A) Model J 500kg 8m/min 400-3-50-2M 50% 1.42kg 7.9 x 21.7 2.3A 1 1 HP IP 55 73 db (A) Model JJ 500kg 16m/min 400-3-50-2M 50% 1.42kg 7.9 x 21.7 3.6A 1 2 HP IP 55 73 db (A) Model L 1000kg 4m/min 400-3-50 optional 2M 50% 1.42kg 7.9 x 21.7 2.3A 1 1 HP IP 55 73 db (A) Model LL 1000kg 8m/min 400-3-50-2M 50% 1.42kg 7.9 x 21.7 3.6A 1 2 HP IP 55 73 db (A) Model R 2000kg 2m/min 400-3-50 optional 2M 50% 2.84kg 7.9 x 21.7 2.3A 2 1 HP IP 55 73 db (A) Model RR 2000kg 4m/min 400-3-50-2M 50% 2.84kg 7.9 x 21.7 3.6A 2 2 HP IP 55 73 db (A) LOAD CHAIN Sizes available from 1/4 in. to 5/16 in. Meets or exceeds many national and international standards. Zinc plated supplied as standard. Black phosphate finish available. 100% proof tested. CONTROL PANEL Provides easy access to controls, plug and play connectors allow for quick voltage change for dual voltage motors. Fuses located on terminal strip (optional). 6

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 7 LIFT WHEEL 5 Pocket liftwheel increases chain and liftwheel engagement while providing smoother lifting, less vibration and reduced chain wear when properly maintained. BRAKE Heavy duty DC brake is standard. AC brake and double DC brake are also available. LIMIT SWITCH Adjustable screw limit switch that will automatically stop the hook at any predetermined point when either hoisting or lifting. INTERNAL CHAIN GUIDE Stamped steel guide coated for corrosion resistance and quiet operation, while keeping the load chain and liftwheel aligned. CLUTCH Designed to prevent lifting of excessive overloads. Located outside the gear box and easy to access. 7

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 8 LODESTAR D8+ CAPACITIES LIFT SPEEDS VOLTAGES 70 to 1500kg 19mtr standard 1.5 to 20mtr/min 3-phase available The Lodestar D8+ meets all Standard SR2.0 requirements. It s clutch, outside the load path, acts as a precise overload device; and design factor is 10:1 with a double brake installed. The Lodestar D8+ is in accordance with the VPLT code of practice. KEY FEATURES ELECTRO-MECHANICAL DOUBLE BRAKES 5 POCKET LIFT WHEEL For quiet & smooth operation. 68 db OPERATIONAL NOISE A result of the double brake system. GEARING Precision machined gears heat treated for strength and durability. INTERNAL CHAIN GUIDE PVC black coated for quieter operation. LOW VOLTAGE CONTROL 110v for long cable runs without voltage drop. 24v & 48v optional. DUTY CYCLE H-4 duty rated for heavy duty application. 2M+ FEM class. 50% duty cycle or 300 on/off per hour. 10:1 MECHANICAL DESIGN FACTOR STANDARD FEATURES OVERLOAD PROTECTION Rated operational range between 125 and 160%. Clutch is outside the load path. DURABLE & LIGHTWEIGHT HOUSING Cast aluminum. Black powder coated finish for low visibility. METRIC RATED LOAD CHAIN Designed and manufactured by Columbus McKinnon. Zinc plated to protect against corrosion. Black phosphate finish optional. LIFETIME WARRANTY The industry s best. Subject to terms and conditions. MEETS OR EXCEEDS WORLD STANDARDS Meets German code of practice VPLT SR2.0 CHAIN STOP Mounted on load chain to prevent overtravel. Standard on direct control. SPECIFICATIONS d8+ OPTIONAL FEATURES CHAIN BAG Easy-to-mount cloth type bags. Rate Standard Operating FEM FEM Chain Load Power Reeves Motor Protection Noise load lifting voltage class duty weight chain consumption falls HP class level speed factor per metre EN 818-7 -full load of chain at 50Hz lift-ewl Model C 125kg 8m/min 400-3-50 2M 50% 0.89kg 6.3 x 18.9 1.2A 1 1/2 HP IP55 68db(A) Model F 250kg 4m/min 400-3-50 2M 50% 0.89kg 6.3 x 18.9 1.2A 1 1/2 HP IP55 68db(A) Model J 250kg 8m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 2.3A 1 1 HP IP55 68db(A) Model JJ 500kg 16m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 3.6A 1 2 HP IP55 68db(A) Model LL 500kg 8m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 3.6A 1 2 HP IP55 68db(A) Model L 650kg 4m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 2.3A 1 1 HP IP55 68db(A) Model R 1000kg 2m/min 400-3-50 2M 50% 2.84kg 7.9 x 21.7 2.3A 2 1 HP IP55 68db(A) Model RR 1300kg 4m/min 400-3-50 2M 50% 2.84kg 7.9 x 21.7 3.6A 2 2 HP IP55 68db(A) Model RT 1500kg 1.4m/min 400-3-50 2M 50% 4.26kg 7.9 x 21.7 3.6A 3 2 HP IP55 68db(A) 8

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 9 BGV-C1 SERIES CAPACITIES LIFT SPEEDS VOLTAGES 250 to 1300kg 19mtr standard 5 to 30mtr/min 3-phase available The Lodestar BGV-C1 Series meets the BGV-C1 German regulation for entertainment rigging. Available with fixed or variable speed, the Lodestar BGV-C1 can be adapted to reach a system integrity level 3 (SIL3).* KEY FEATURES ELECTRO-MECHANICAL DOUBLE BRAKES 5 POCKET LIFT WHEEL For quiet & smooth operation. 68 db OPERATIONAL NOISE A result of the double brake system. GEARING Precision machined gears heat treated for strength and durability. INTERNAL CHAIN GUIDE PVC black coated for quieter operation. LOW VOLTAGE CONTROL 110v for long cable runs without voltage drop. 24v & 48v optional. DUTY CYCLE H-4 duty rated for heavy duty application. 2M+ FEM class. 50% Duty Cycle or 300 on/off per hour. 10:1 MECHANICAL DESIGN FACTOR UNDERLOAD PROTECTION With load cell installed. MODULAR MULTI-PIN CONNECTOR With multi-wire shielded cable. 4 POSITION LIMIT SWITCH With active spring micro-switch. BUILT-IN PLC For safety function monitoring, Brake and limit switch integrity, load cell reading, overload and underload settings. SPECIFICATIONS BGV-C1 STANDARD FEATURES OVERLOAD PROTECTION Rated operational range between 125 and 160%. Clutch is outside the load path. DURABLE & LIGHTWEIGHT HOUSING Cast aluminum. Black powder coated finish for low visibility. METRIC RATED LOAD CHAIN Designed and manufactured by Columbus McKinnon. Zinc plated to protect against corrosion. Black phosphate finish optional. LIFETIME WARRANTY The industry s best. Subject to terms and conditions. MEETS OR EXCEEDS WORLD STANDARDS Meets German regulation BGV-C1. CHAIN STOP Mounted on load chain to prevent overtravel. OPTIONAL FEATURES CHAIN BAG Easy-to-mount cloth type bags. LOAD CELL Built in on the suspension hook. * SIL3 requires a BGV-C1 SIL3 certified controller not included. Rate Standard Operating FEM FEM Chain Load Power Reeves Motor Motor Protection Noise load lifting voltage class duty weight chain consumption falls HP Kw class level speed factor per metre EN 818-7 -full load of chain at 50Hz lift-ewl Model F 250kg 4m/min 400-3-50 2M 50% 0.89kg 6.3 x 18.9 1.2A 1 1/2 HP 0.37Kw IP55 68db(A) Model JJ 500kg 16m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 3.6A 1 2 HP 1.47Kw IP55 68db(A) Model LL 650kg 8m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 3.6A 1 2 HP 1.47Kw IP55 68db(A) Model L 500kg 4m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 2.3A 1 1 HP 0.74Kw IP55 68db(A) Model RR 1300kg 4m/min 400-3-50 2M 50% 2.84kg 7.9 x 21.7 3.6A 2 2 HP 1.47Kw IP55 68db(A) Varistar 500kg 30m/min 400-3-50 2M 50% 1.42kg 7.9 x 21.7 6A 1 3 HP 2.27Kw IP55 68db(A) 9

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 10 PROSTAR CAPACITIES SPEEDS VOLTAGES 113 to 500kg 2 to 12mtr/min Single & 3-phase available Lightweight, quiet and portable, the CM Prostar is designed and built for the unique rigging needs encountered at small venues. Featuring an overload device that protects the hoist, operator and structure from damaging overloads. KEY FEATURES STANDARD FEATURES DC ELECTRO-MECHANICAL Non-adjusting for low maintenance and quite operation. GEARING Precision machined gears heat treated for strength and durability. CHAIN GUIDE One piece jam free for smooth operation. HOUSING Lightweight, cast aluminum, durable and strong black powder coated finish for low visibility. LIFT WHEEL CM patented 10 pocket oblique lift wheel for quiet and smooth operation. LOW VOLTAGE CONTROL 110v for long cable runs without voltage drop. 24v and 48v optional. DUTY CYCLE H-4 duty rated, designed for heavy duty application. OVERLOAD PROTECTION Helps prevent lifting of dangerous overloads. CHAIN STOP Mounted on load chain prevents over-travel. METRIC RATED LOAD CHAIN Designed and manufactured by Columbus McKinnon. Zinc plated to protect against corrosion. Black phosphate finish optional. LIFETIME WARRANTY The industry s best. Subject to terms and conditions. MEETS OR EXCEEDS WORLD STANDARDS OPTIONAL FEATURES CHAIN BAG Easy-to-mount cloth type bags. DOUBLE BRAKE ENCODER.5 SPECIFICATIONS PROSTAR Rate Reeves Motor Lift Hoist weight Chain weight Full load amps capacity fall of HP speed (unchained) per metre chain 1-phase 3-phase 136kg 1 1/6 4.8m/min 12.7 0.35kg 3.6.6* / 1.2ˇ 136kg 1 1/6 4.8m/min 12.7 0.35kg.6* / 1.1ˇ 226kg 1 1/6 4.8m/min 12.7 0.35kg.7* / 1.2ˇ 226kg 1 1/6 3.7m/min 12.7 0.35kg 4-272kg 2 1/6 2.4m/min 16.3 0.7kg 3.6.6* / 1.1ˇ 272kg 2 1/6 2.4m/min 16.3 0.7kg 3.6.6* / 1.1ˇ 500kg 2 1/6 2.4m/min 16.3 0.7kg.7* / 1.2 *415 volt operation ˇ220 volt operation Rate Lift speed Operating voltage capacity Single phase Three phase 136kg 4.8m/min 115-1-50/60 220-1-50/60 220-3-50/60 415-3-50/60 136kg 7.3m/min - - 220-3-50/60 415-3-50/60 136kg 12m/min - - 220-3-50/60 415-3-50/60 226kg 3.7m/min 115-1-50/60 220-1-50/60 - - 226kg 4.8m/min - - 220-3-50/60 415-3-50/60 226kg 6m/min - - 220-3-50/60 415-3-50/60 272kg 2.4m/min 115-1-50/60 220-1-50/60 - - 272kg 3.7m/min - - 220-3-50/60 415-3-50/60 500kg 1.8m/min 115-1-50/60 220-1-50/60 - - 500kg 2.4m/min - - 220-3-50/60 415-3-50/60 500kg 3.7m/min - - 220-3-50/60 415-3-50/60.5 6 6.75 Drawing legend 1 Single 4.25 DIMENSIONS Reeving 2.25 Double A 279mm 308mm B 75mm 89mm C 73mm 60mm 13/16.75 8.5 10

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 11 WINCHES Electric & hand wire rope winches CM offers a diverse range of electric and hand wire rope winches for lifting, lowering, pulling and positioning loads to meet your specific needs. Wall-mounted hand wire rope winches are ideal for the raising and lowering of banners, nets, and scenery. Additionally, console-mounted wire rope winches provide maximum flexibility when used in theatres and studios. Electric wire rope winches provide superior performance when lifting speeds are vital. Whatever the lifting requirement, there is a Meteor winch for the job. SW-E STANDARD ELECTRIC WIRE ROPE WINCHES n Capacities: up to 7500kg n Rope Speeds: up to 30mtrs per minute n The aluminum compact wire rope winch has a closed construction and therefore requires little maintenance. n Perfect for superstructures on vehicles & trailers and when lifting & lowering a wide variety of loads. n Overload protection available. n Multiple line winches available. n C1 compliance available. 11

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 12 WINCHES Electric & hand wire rope winches RPE ELECTRIC WIRE ROPE WINCHES Capacities: 250 to 1000kg n Compact dimensions due to internal brake motor. n Adjustable slip clutch to protect the winch from overloading standard for Model RPE 10-6. n Spur gear transmission with helical first gear ensures smooth motion. Lubricated by grease and can, therefore, be used in any position. n Plain rope drum standard. Grooved drum available. n Spring pressure disc brake incorporated in the motor holds the load secure in the event of a power failure. n The rope is secured to the drum in a recess so that the rope can be wound onto the drum in several layers without damage. n The standard version comes with low voltage control. Direct control optional. n Integrated emergency stop. n Supplied WITHOUT wire rope. SW-K-LB WIRE ROPE WINCHES GALVANIZED DESIGN Capacities: 150 to 1200kg We have designed manual lifting to be not only secure but also ergonomic: The friction disk brake equipped with a shuttle valve on our wire rope winch prevents unintentional lowering of the load in every position. These wire rope winches have been galvanized for maximum protection against corrosion. SW-K-LB-VA WIRE ROPE WINCHES STAINLESS STEEL DESIGN Capacities: 250 to 900kg The robust high-quality LB wire rope winch is made of V2A stainless steel suitable for outside use. Whether used for lifting, opening gates, or for lifting & lowering portable staging, this console-mounted hand wire rope winch effortlessly handles the job. 12

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 13 SW-W WALL-MOUNTED WIRE ROPE WINCHES Capacities: 80 to 1000kg With a removable crank (on the 80 & 125kg units), inside braked spring retention, and aluminum housing, workers in gymnasiums, auditoriums, aquatic centers and arenas will find the SW-W winch the perfect equipment for most requirements. The versatile SW-W, equipped with a toothed spur wheel back gear, has a low net weight and compact design which allows it to meet an abundance of requirements. Easily mounts onto the wall and permits rope output in any direction. SW-W-SGO WALL-MOUNTED WIRE ROPE WINCHES WITH WORM GEAR Capacities: 250 to 5000kg For the lifting and lowering of a wide range of loads, our manual wire rope winch with worm gear and additional friction disk brake is mounted onto the wall and takes up to 5000kg tension loads. Winch housing and rope drum are made of sturdy steel plate. Sizes from 2000kg upwards are equipped with an additional speed increasing ratio used for overdrive. OPTIONS: Multi-compartment, zinc plated, grooved drum DSR SHEAVES The steel DSR sheaves feature a wear-resistant rope guide where the machine groove is perfectly adjusted to the wire rope. Fifteen different types guarantee a made-to-specification solution at loads of up to 8 tons. The sheaves can be varied in wire and sheave diameter (from 80mm up to 490mm) and as standard all sheaves are equipped with ball bearings. The sheaves are one of the guiding elements within the comprehensive CM product range of wire rope winches, wire rope and wire rope pulley blocks. 13

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 14 MANUAL HOISTS VSlII NEW ENTERTAINMENT HAND CHAIN HOISTS Capacities: 500 to 1000kg Columbus McKinnon are pleased to introduce the new VSIII entertainment hand chain hoist. Built to suit the high demands of the entertainment industry the VSIII offers improved hand chain guides to prevent jamming of the hand chain. High quality bearings, gearbox and load sheave ensure smooth operation in all applications. Furthermore the hand forces are set for easy operation and the black finish helps to disguise the hoist during the show. n High quality bearings for gearbox, side plates and load chain sheave for long life. n Zinc plated and yellow chromated brake parts and guide rollers ensures increased corrosion protection. n Zinc plated load chain fitted as standard for added corrosion protection. SPECIFICATIONS!These hoists are not designed for lifting people and must not be used for this purpose. Model Capacity in kg Chain Technical specification Weight / number of dimension A (min) B C d E F G H K at standard HOL falls of chain mm mm mm mm mm mm mm mm mm mm kg VSIII 0.5/1 500 / 1 5 x 15 350 21 23 16 145 140 80 60 240 9.0 VSIII 1.0/1 1000 / 1 6 x 18 380 28 27 20 158 87 68 270 240 11.5 14

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 15 RATCHET LEVER HOISTS HANDY RATCHET LEVER HOISTS Capacities: 250 to 500kg The extreme low tare weight and the very compact design make the hoist easy to use even in confined working conditions. Due to the multitude of application possibilities e.g. in industry, trade and service this ratchet lever hoist is indispensable. n The enclosed design protects the internal parts from contamination. n The short handlever is fitted with an ergonomic rubber grip. n All parts of the disc type load brake are manufactured from high quality materials and are corrosion protected. n Standard free chaining device to quickly attach the load or to pull the chain through the hoist in both directions. n Alloyed steel link chain with zinc-plated resp. yellow chromated finish, in accordance with national and international standards and regulations. n Drop forged suspension and load hooks are made from non-aging, high tensile steel and fitted with robust safety latches. UNOplus RATCHET LEVER HOISTS Capacities: 750 to 6000kg This versatile tool for lifting, pulling and securing of loads is characterised by its compact design and robust stamped steel construction. n Due to optimized gearing and improved bearings in the housing cover a minimum effort is required to operate the short hand lever. n Steel hand wheel as standard. n Automatic screw-and-disc type load brake with corrosion protected components. n Standard free chaining device to quickly attach the load or to pull the chain through the hoist in both directions. n Robust chain guide rollers eliminate fouling and jamming of chain on the load sheave. n Sturdy bottom block with encapsulated bolt connections n Alloyed steel link chain with zinc-plated resp. yellow chromated finish, in accordance with national and international standards and regulations. n Drop forged suspension and load hooks are made from non-aging, high tensile steel and fitted with robust safety latches. 15

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 16 TROLLEYS & CLAMPS Full complement to our hoists PUSH TROLLEYS Capacities: 500 to 5000kg The trolley enables the exact positioning or easy traversing of large loads with either manual or powered hoisting equipment. n Available to fit beam widths from 50-300mm. Optional extras: n Buffers n Corrosion resistant or explosion proof version n Locking device to secure in position on the beam. ELECTRIC MOTOR DRIVEN TROLLEYS WITH ENCODER Capacities: 1000 to 5000kg Specially recommended for loads over 1000kg, for transporting over long distances and/or when used frequently. Suitable for almost all hoists with suspension hook due to universal shackle connection. n Standard operating voltage: Euro-voltage 400 V, 3-phase, 50 Hz. Single speed motors can be reconnected to 230 V. n Motor protected to IP 55 against dust and water jets. Push-button pendant control, IP 65. n Anti-drop and anti-tilt devices as standard. n Easy adjusted to fit to a wide range of beam widths and profiles due to threaded spindles. n Maximum Travel Speed: 18m/min. STANDARD BEAM CLAMPS Capacities: 1000 to 10000kg Provides a quick and versatile rigging point for hoisting equipment, pulley blocks or loads. n Available to fit beam widths from 75 to 320mm. n Can be supplied with a shackle if required. 16

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 17 STAGE RIGGING SLINGS SOFT STEELS STAGE RIGGING SLINGS Capacities: 2000kg Steel wire rope with a loose polyester jacket according to EN 1492-2, EN 13414-1, EN 13414-2 and EN 13414-3. n Safety factor of 5:1 n Minimum edge radius 6mm n Heat resistance to 150 C n Clear error prevention through identification label n Black polyester outer shell n Wide range of applications for rigging n Control window to check the details of the rope core Optional extras: n Capacities up to 4000kg on request. Model WLL Width Length kg mm mtr RSE-SRS-2005-S 2000 47 0.50 RSE-SRS-2010-S 2000 47 1.00 RSE-SRS-2015-S 2000 47 1.50 RSE-SRS-2020-S 2000 47 2.00 RSE-SRS-2030-S 2000 47 3.00 RSE-SRS-2040-S 2000 47 4.00 17

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:21 Page 18 ASSOCIATED PRODUCTS THE CM SPECIAL THEATRICAL ALLOY CHAIN (STAC) For theatrical rigging applications where bridle adjustability is required. n Super strength with working limits of 6 tons. 1/2 diameter grade 80 alloy material. n Heat treated alloy steel provides long life. n Fire & abrasion resistant. n 4:1 design factor meets or exceeds worldwide standards. n Each link is proof tested to assure weld and material integrity. n Chain embossed with STAC and CM for easy identification as CM alloy. Also tagged with size, grade, reach and working load limit. n Versatility - link accepts up to 3/4 shackle for adjustability. 3.74 STAC S.T.A.C. GRADE SPECIAL ALLOY SIZE 12.7 COLUMBUS McKINNON.91.53 REACH...FT. LEGS 1 WLL 6000 Kg AT 90 0 TO HORIZONTAL HEIGHT SAFETY PRODUCTS Columbus McKinnon believes in total commitment to safety awareness and, as such, offers a full range of rigging height safety products. n Riggers harness - 5 point full body harness with attachment points in the back and in the chest area. n Fall arrest blocks - available in various size from 6 to 28mtrs in wire, webbing or kermantle rope. n Fall arrest lanyards and restraints - available in 1 to 2mtr lengths, in rope or webbing material and with or without shock absorbers. n Accessories - a full range of accessories is also available including karabiners, safety kits, bags, ropes etc 18

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:22 Page 19 TRAINING Be safe. Get trained. For decades, the Lodestar electric chain hoist or motor has taken on many different supporting roles in the entertainment industry. From standard lifts to sophisticated computer-automated projects, the Lodestar has been the number one choice in the market. Loyal users trust he Lodestar for unparalleled reliability and durability, show after show. As the entertainment industry continues to evolve through technological advancements and greater production demands, the need for qualified and trained hoist technicians continues to expand. From basic motor maintenance training to certification classes, professionals from Columbus McKinnon cover everything from hoist design and operation to maintenance tips of the trade. Participants become well versed in all aspects of hoist technology and understand practices related to safe operation and long hoist life. n Motor technician certification U Basic Lodestar introduction & maintenance T C U D O R P For course information and schedules, please call +44 (0) 1244 391104 or email: sales.uk@cmco.eu C A T A L O G n E Columbus McKinnon offers classes covering many areas of entertainment technology industry including: 19

CM Entertainment Catalogue 2015v3_Layout 1 09/03/2015 12:22 Page 20 C O L U M B U S M C K I N N O N C O R P O R A T I O N E N T E R T A I N M E N T P R O D U C T S Knutsford Way, Sealand Industrial Estate, Chester, CH1 4NZ United Kingdom Tel: +44 (0) 1244 375375 I Fax: +44 (0) 1244 377403 I www.cm-et.com 2015 Columbus McKinnon Corporation Limited Document: 83 Issue: 3 Date: March 2015