Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid type Filter style Valve enclosure Hose recommendation PRICE SCHEDULE 9.0 Hydraulics VENDOR TO PROVIDE FOLLOWING DETAIL Force America, lever & cable controls Gresen V40/V20E Add-A-Stack valve and electric sander control RVC control levers and/or joystick levers with stainless steel cables to valve, hoist has center Neutral lock, electric sander Force America Model 5100EX-3F manually adjustable electronic spreader control with stand-by, blast & ground speed controller Front Frame mount, Spicer driveline from engine crankshaft Piston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS) Closed center, load sensing type, with Mid-inlet 6 functions, box hoist, plow lift, plow swing, wing toe, wing heel, sander auger/spinner Manual cable controls, electric sander cntrl. 30 gallon, frame mount, with filler breather, sight glass, suction screen, and 2 shut off valve, cube design w/ in tank filter provision Conoco hydraulic 32 (included with installation) In tank mounted filter Frame mounted, stainless steel construction, removeable weather tight cover 2 diameter suction, 1 diameter return, 1 pressure, balance to be same as port sizing. R2 for pressure lines, R1 for return lines, & R4 for suction line TOTAL PRICE (Does not include installation): $8,763.00 9.1 - Installation (hoses & fittings, mounting brackets, pump & valve mounts, control tower, fasteners, hyd. oil and labor) (hosing for pump/tank/valve body and sander only, sander control valve mounted on pedistal by controls & wired from control valve to valve body and hosed from valve body to rear of the truck) PRICE $3,826.00 9.2 - Additional valve section, control & cable (each) (add/deduct)
PRICE $530.00 9.3-30 gal. slimeline tank with in tank filter in lieu of std. 30 gal. 9.4 - Low oil sending unit, wired to 5100EX warning light, installed PRICE $150.00 PRICE $200.00 9.5 - Stainless Steel oil tank in lieu of standard mild steel (Std. 30 gal. square) PRICE $410.00 9.6 - Stainless Steel Slim-Line oil tank in lieu of standard mild steel square tank PRICE $980.00 9.7-45 gallon S/S behind the cab oil tank in lieu of std. 30 gal M/S 9.8 - Force FASD45L 6.0 CID pump in lieu of FASD34L 4.67 CID 9.9 - High pressure filter & in cab warning light- installed 9.10 - Cable pull-off valve (hoist limiter valve), installed 9.11 - Wing loc valve (toe and/or heel) - installed 9.12-12V DC pump shut off w/ over ride switch, in lieu of manual 1 shut off valve PRICE $1,265.00 PRICE $415.00 PRICE $577.00 PRICE $335.00 PRICE $215.00 PRICE $562.00 9.13 - VT35 M/S valve/tank enclosure in lieu of standard S/Sb valve body & tank PRICE $340.00 9.14 - VT35 S/S valve/tank enclosure in lieu of standard valve body & tank PRICE $1,830.00 9.15 - Hoist control lever installed with 3-button controls on handle (Blast, Standby, and Air Trip)- in lieu of standard 9.16 - Auger reversing valve installed PRICE $286.00 PRICE $420.00 9.17 - Auger reversing valve and selector valve for dual spinners- installed PRICE $815.00 9.18 - Electric Open Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller PRICE $582.00 9.19 - Electric Closed Loop Prewet Power Unit with plumbing (No Tank)
Controlled with 5100EX controller PRICE $973.00 9.20 - Tailgate pre-wet system, LDS-TG075-EM, 75 gallon tank, open loop p/c mounting brackets, electric pump (controlled with 5100EX ~ add harness) PRICE $1,740.00 9.21 - Tailgate pre-wet system, LDS-TG100-EM, 100 gallon tank, open loop p/c mounting brackets, electric pump (controlled with 5100EX ~ add harness) PRICE $1,825.00 9.22 - Stainless steel pre-wet mounting brackets in lieu of standard p/c (75 gal) PRICE $945.00 9.23 - Stainless steel pre-wet mounting brackets in lieu of standard p/c (100 gal) PRICE $670.00 9.24-5100EX electric prewet harness for open loop PRICE $420.00 9.25 - Install EM tailgate or frame mount pre-wet system, includes assembly, plumbing, wiring and fitting brackets to tailgate PRICE $1,021.00 9.26 - Tailgate pre-wet system, LDS-TG100-HOL, 100 gallon tank, p/c mounting brackets, hydraulic pump, open loop (controlled with 5100EX) PRICE $2,520.00 9.27 - Install HCL tailgate pre-wet system, includes assembly, plumbing, wiring and fitting brackets to tailgate 9.28 - Hydraulic Prewet Feedback Cable PRICE $1,345.00 PRICE $309.00 9.29 - Electric Closed Loop Prewet (includes flow meter & feedback cable) ilo open loop PRICE $780.00 9.30 - Hydraulic Closed Loop Prewet (includes flow meter & feedback cable) ilo open loop PRICE $1,110.00 9.31 - Electric Gravity Feed Prewet Kit- 1-nozzle- 12vdc Plunger Valve- installed PRICE $876.00 9.32 - Constant Mesh PTO and Force TXV92 5.6 CID load sense pump and 12VDC pump shutdown and override switch in lieu of standard PRICE $3,185.00 9.33 - Hot Shift PTO and Force TXV92 5.6 CID load sense pump in lieu of standard 9.34 - Electric Double Selector Valve (C10964) PRICE $2,990.00 PRICE $530.00
9.35 - External Plow Float Control Valve- installed 9.36 - RW-SS Road Watch Temp sensor- installed (849-0262-003) with readings viewed in Road Watch display only 9.37 - Hydraulic Open Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller 9.38 - Hydraulic Closed Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller 9.39 - C10190 Pressuere relief valve- installed PRICE $1,458.00 PRICE $1,075.00 PRICE $1,335.00 PRICE $1,646.00 PRICE $438.00 9.40 - Low Liquid Level Switch Assy. & Weather Pack Connector- installed PRICE $139.00 9.41 - Hyd. Prewet Valve Section 9.42 - Low & Temp. sending unit in lieu of low oil only 9.43-5100EX Closed Loop Feed back sensor and cable- installed PRICE $552.00 PRICE $24.00 PRICE $1,052.00 9.44-3-section Add-A-Fold valve assy. for MuniBody cross conveyor- includes S/S valve body enclosure- 9-function harness for 5100EX (must add 1-valve section) PRICE $4,392.00 9.45 - Extended PTO shaft with constant mesh PTO in lieu of std. shaft 9.46 - Extended PTO shaft with Hot Shift PTO in lieu of std. shaft PRICE $620.00 PRICE $920.00 Delivery Starting Point Address N15921 Schubert Rd., Galesville, WI 54630 Price per loaded mile for delivery $4.00 VENDOR: UNIVERSAL TRUCK EQUIPMENT CONTACT PERSON: DONNIE BJORGE ADDRESS: N15921 SCHUBERT RD., GALESVILLE, WI 54630 PHONE NO.: 608-539-4600 FAX NO.: 608-539-4800 E-MAIL ADDRESS: donnie@universaltruckequipment.com
PRICE SCHEDULE 9.0 Hydraulics Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid type Filter style Valve enclosure Hose recommendation VENDOR TO PROVIDE FOLLOWING DETAIL Force America, 5100EX-3-ULTRA- Three Stick Proportional Controller, Add-A-Fold valve w/ electric controls & electric spreader control Force America three (3) mini-stick Ultra Controller, model 5100EX-3-Ultra Proportional control console, floor mount Force America 5100EX electronic controller, dual manual adjustments detent positions for auger and spinner knobs (integrated unit) Front Frame mount, Spicer driveline from engine crankshaft Piston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS) Force America AAF, Add-A-Fold Closed center, load sensing type, with Mid-inlet and manifold design 7 functions, box hoist, plow lift, plow swing, wing toe, wing heel, sander auger & spinner Electric solenoid, with manual over-ride 30 gallon, frame mount, with filler breather, sight glass, suction screen, and 2 shut off valve, cube design w/ in tank filter provision Conoco hydraulic 32 (included with installation) In tank mounted filter, 12 volt DC condition indicator system Frame mounted, stainless steel construction, removeable weather tight cover 2 diameter suction, 1 diameter return, 1 pressure, balance to be same as port sizing. R2 for pressure lines, R1 for return lines, & R4 for suction line TOTAL PRICE (Does not include installation): $17,877.00 9.1 - Installation (hoses & fittings, mounting brackets, pump & valve mounts, control tower, fasteners, hyd. oil and labor) (hosing for pump/tank/valve body and sander only, sander control valve mounted on pedistal by controls & wired from control valve to valve body and hosed from valve body to rear of the truck) PRICE $3,410.00 9.2 - Additional valve section, control & cable (each) (add/deduct) PRICE $732.00
9.3 - Upgrade to a 4-Stick ULTRA Contoller in lieu of 3-Stick Controller 9.4 - Upgrade to a 5-Stick ULTRA Contoller in lieu of 3-Stick Controller 9.5 - Adder for Switch Base to Ultra Controllers (8-switches) 9.6-30 gal. slimeline tank with in tank filter in lieu of std. 30 gal. PRICE $825.00 PRICE $1,910.00 PRICE $1,245.00 PRICE $150.00 9.7 - Stainless Steel oil tank in lieu of standard mild steel (Std. 30 gal. square) PRICE $410.00 9.8 - Stainless Steel Slim-Line oil tank in lieu of standard mild steel square tank PRICE $980.00 9.9 - Force FASD45L 6.0 CID pump in lieu of FASD34L 4.67 CID 9.10 - Wing loc valve- installed 9.11 - High pressure filter & in cab warning light- installed 9.12 - Cable pull-off valve (hoist limiter valve), installed 9.13 - Hoist limiter switch, installed (wired to Ultra) 9.14-12V DC pump shut off w/ over ride switch, in lieu of manual 1 shut off valve PRICE $415.00 PRICE $215.00 PRICE $577.00 PRICE $335.00 PRICE $290.00 PRICE $562.00 9.15 - VT35 valve/tank enclosure in lieu of standard valve body & tank- M/S PRICE $340.00 9.16 - VT35 valve/tank enclosure in lieu of standard valve body & tank- S/S PRICE $1,830.00 9.17-45 gallon S/S behind the cab oil tank in lieu of std. 30 gal M/S 9.18 - Internal wing toe lock valve (Uni-Tilt wings) 9.19-5100EX Closed Loop Feed back sensor and cable- installed (in lieu of open loop) 9.20 - Supervisor Key for 5100EX PRICE $1,265.00 PRICE $290.00 PRICE $1,052.00 PRICE $64.00 9.21 - Harnessing for auger reverse and dual spinners
PRICE $477.00 9.22 - Electric Double Selector Valve (C10964) PRICE $505.00 9.23 - Tailgate pre-wet system, LDS-TG075-EM, 75 gallon tank, open loop p/c mounting brackets, electric pump (controlled with 5100EX ~ add harness) PRICE $1,740.00 9.24 - Tailgate pre-wet system, LDS-TG100-EM, 100 gallon tank, open loop p/c mounting brackets, electric pump (controlled with 5100EX ~ add harness) PRICE $1,825.00 9.25 - Stainless steel pre-wet mounting brackets in lieu of standard p/c (75 gal) PRICE $945.00 9.26 - Stainless steel pre-wet mounting brackets in lieu of standard p/c (100 gal) PRICE $670.00 9.27-5100EX electric prewet harness for open loop 9.28 - Install EM tailgate pre-wet system, includes assembly, plumbing, wiring and fitting brackets to tailgate PRICE $420.00 PRICE $1,021.00 9.29 - Tailgate pre-wet system, LDS-TG100-HOL, 100 gallon tank, p/c mounting brackets, hydraulic pump, open loop (controlled with 5100EX) PRICE $2,520.00 9.30 - Install HCL tailgate pre-wet system, includes assembly, plumbing, wiring and fitting brackets to tailgate 9.31 - Hydraulic Prewet Feedback Cable PRICE $1,345.00 PRICE $309.00 9.32 - Electric Closed Loop Prewet (includes flow meter & feedback cable) ilo open loop PRICE $780.00 9.32 - Hydraulic Closed Loop Prewet (includes flow meter & feedback cable) ilo open loop PRICE $1,110.00 9.34 - Electric Gravity Feed Prewet Kit- 1-nozzle- 12vdc Plunger Valve- installed PRICE $876.00 9.35 - Constant Mesh PTO and Force TXV92 5.6 CID load sense pump and 12VDC pump shutdown and override switch in lieu of standard PRICE $3,185.00 9.36 - Hot Shift PTO and Force TXV92 5.6 CID load sense pump in lieu of standard 9.37 - Integrated Plow Float Control Valve- installed PRICE $2,990.00 PRICE $1,216.00 9.38 - RW-SS Road Watch Temp sensor- installed (849-0262-003)
with readings viewed in Road Watch display only 9.39 - Electric Open Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller 9.40 - Electric Closed Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller 9.41 - Hydraulic Open Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller 9.42 - Hydraulic Closed Loop Prewet Power Unit with plumbing (No Tank) Controlled with 5100EX controller 9.43 - C10190 Pressuere relief valve- installed 9.44 - Adder for double acting plow lift with float 9.45 - Low Oil & Temp. sending unit in lieu of low oil only PRICE $1,075.00 PRICE $582.00 PRICE $973.00 PRICE $1,335.00 PRICE $1,646.00 PRICE $438.00 PRICE $430.00 PRICE $24.00 9.46 - Low Liquid Level Switch Assy. & Weather Pack Connector- installed PRICE $139.00 9.47-9-function harness for 5100EX- used with MuniBody front cross conveyor (must add 1-valve section) PRICE $1,860.00 9.48 - Extended PTO shaft with constant mesh PTO in lieu of std. shaft 9.49 - Extended PTO shaft with Hot Shift PTO in lieu of std. shaft PRICE $620.00 PRICE $920.00 Delivery Starting Point Address N15921 Schubert Rd., Galesville, WI 54630 Price per loaded mile for delivery $4.00 VENDOR: UNIVERSAL TRUCK EQUIPMENT CONTACT PERSON: DONNIE BJORGE ADDRESS: N15921 SCHUBERT RD., GALESVILLE, WI 54630 PHONE NO.: 608-539-4600 FAX NO.: 608-539-4800 E-MAIL ADDRESS: donnie@universaltruckequipment.com
PRICE SCHEDULE 9.0 Hydraulics Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid type Filter style Valve enclosure Hose recommendation VENDOR TO PROVIDE FOLLOWING DETAIL Force America, MPJC6100-3-CAN-ULTRA Three Stick Proportional Controller- GEN3, Add-A-Fold valve with electric controls and electric spreader control - 7" LCD monitor Force America three (3) mini-stick Ultra Controller, model MPJC6100-3-CAN-ULTRA Proportional control console, floor mount Force America SSC-6100 electronic controller, dual manual adjustments, detented positions for auger and spinner knobs (integrated unit) Front Frame mount, Spicer driveline from engine crankshaft Piston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS) Parker MCV-ISO Add-A-Fold Closed center, load sensing type, with Mid-inlet and manifold design 7 functions, box hoist, plow lift, plow swing, wing toe, wing heel, sander auger & spinner Electric solinoid, with manual over-ride 30 gallon, frame mount, with filler breather, sight glass, suction screen, and 2 shut off valve, cube design w/ in tank filter provision Conoco hydraulic 32 with low oil sending unit In tank mounted filter, 12 volt DC condition indicator system Frame mounted, stainless steel construction, removeable weather tight cover 2 diameter suction, 1 diameter return, 1 pressure, balance to be same as port sizing. R2 for pressure lines, R1 for return lines, & R4 for suction line TOTAL PRICE (Does not include installation): $20,337.00 9.1 - Installation (hoses & fittings, mounting brackets, pump & valve mounts, control tower, fasteners, hyd. oil and labor) (hosing for pump/tank/valve body and sander only, sander control valve mounted on pedistal by controls & wired from control valve to valve body and hosed from valve body to rear of the truck) PRICE $3,688.00
9.2 - Additional valve section, control & cable (each) (add/deduct) 9.3 - Upgrade to a 4-Stick ULTRA Contoller in lieu of 3-Stick Controller 9.4 - Upgrade to a 5-Stick ULTRA Contoller in lieu of 3-Stick Controller 9.5-30 gal. slimeline tank with in tank filter in lieu of std. 30 gal. PRICE $732.00 PRICE $485.00 PRICE $1,935.00 PRICE $150.00 9.6 - Stainless Steel oil tank in lieu of standard mild steel (Std. 30 gal. square) PRICE $410.00 9.7 - Stainless Steel Slim-Line oil tank in lieu of standard mild steel square tank PRICE $980.00 9.8 - Force FASD45L 6.0 CID pump in lieu of FASD34L 4.67 CID 9.9 - Wing loc valve- installed 9.10 - High pressure filter & in cab warning light- installed 9.11 - Cable pull-off valve (hoist limiter valve), installed 9.12 - Hoist limiter switch, installed (wired to Ultra) 9.13-12V DC pump shut off w/ over ride switch, in lieu of manual 1 shut off valve PRICE $415.00 PRICE $215.00 PRICE $577.00 PRICE $335.00 PRICE $290.00 PRICE $562.00 9.14 - VT35 valve/tank enclosure in lieu of standard valve body & tank- M/S PRICE $340.00 9.15 - VT35 valve/tank enclosure in lieu of standard valve body & tank- S/S PRICE $1,830.00 9.16-7" color LCD display monitor and mount PRICE Included in base price 9.17 - Electric Double Selector Valve (C10964) PRICE $505.00 9.18 - Tailgate pre-wet system, LDS-TG075-EM, 75 gallon tank, open loop p/c mounting brackets, electric pump (controlled with 6100 ~ add harness) PRICE $1,740.00 9.19 - Tailgate pre-wet system, LDS-TG100-EM, 100 gallon tank, open loop p/c mounting brackets, electric pump (controlled with 6100 ~ add harness) PRICE $1,825.00
9.20 - Stainless steel pre-wet mounting brackets in lieu of standard p/c (75 gal) PRICE $945.00 9.21 - Stainless steel pre-wet mounting brackets in lieu of standard p/c (100 gal) PRICE $670.00 9.22-6100 electric prewet harness for open loop 9.23 - Install EM tailgate pre-wet system, includes assembly, plumbing, wiring and fitting brackets to tailgate PRICE $420.00 PRICE $1,021.00 9.24 - Tailgate pre-wet system, LDS-TG100-HOL, 100 gallon tank, open loop p/c mounting brackets, hydraulic pump, relief valve, (controlled with 6100) PRICE $2,520.00 9.25 - Install HOL tailgate pre-wet system, includes assembly, plumbing, wiring and fitting brackets to tailgate 9.26 - Hydraulic Prewet Feedback Cable PRICE $1,345.00 PRICE $309.00 9.27 - Electric Closed Loop Prewet (includes flow meter & feedback cable) ilo open loop PRICE $780.00 9.28 - Hyd. Closed Loop Prewet (includes flow meter & feedback cable) ilo open loop PRICE $480.00 9.29 - Adder for Direct Application Valve Module, feedback cable, and 3-Lane Switch Package PRICE $2,008.00 9.30 - Constant Mesh PTO and Force TXV92 5.6 CID load sense pump and 12VDC pump shutdown and override switch in lieu of standard PRICE $3,185.00 9.31 - Hot Shift PTO and Force TXV92 5.6 CID load sense pump in lieu of standard 9.32 - Integrated Plow Float Control Valve- installed 9.33 - Road Watch Temp Sensor Kit viewed on 6100 controller- installed 9.34 - Road Watch Adapter Cable to be used with customer supplied Road Watch Sensor - (Road Watch Sensor installation is NOT included) 9.35 - C10190 Pressuere relief valve- installed 9.36 - Adder for double acting plow lift with float PRICE $2,990.00 PRICE $1,216.00 PRICE $825.00 PRICE $129.00 PRICE $438.00 PRICE $430.00
9.37 - Adder for Switch Base to Ultra Controllers (8-switches) 9.38 - Internal wing toe lock valve (Uni-Tilt wings) 9.39 - Low Oil & Temp. sending unit in lieu of low oil only PRICE $1,245.00 PRICE $290.00 PRICE $24.00 9.40 - Low Liquid Level Switch Assy. & Weather Pack Connector- installed PRICE $139.00 9.41 - Electric Gravity Feed Prewet Kit- 1-nozzle- 12vdc Plunger Valve- installed PRICE $876.00 9.42 - Electric Open Loop Prewet Power Unit with plumbing (No Tank) Controlled with 6100 controller 9.43 - Electric Closed Loop Prewet Power Unit with plumbing (No Tank) Controlled with 6100 controller 9.44 - Hydraulic Open Loop Prewet Power Unit with plumbing (No Tank) Controlled with 6100 controller PRICE $582.00 PRICE $973.00 PRICE $1,335.00 9.45 - Hydraulic Closed Loop Prewet Power Unit with plumbing (No Tank) Controlled with 6100 controller PRICE $1,646.00 9.46 - Painted carbon steel valve body enclosure in lieu of standard S/S PRICE N/A 9.47-45 gallon S/S behind the cab oil tank in lieu of std. 30 gal M/S 9.48 - Extended PTO shaft with constant mesh PTO in lieu of std. shaft 9.49 - Extended PTO shaft with Hot Shift PTO in lieu of std. shaft PRICE $1,265.00 PRICE $620.00 PRICE $920.00 Delivery Starting Point Address N15921 Schubert Rd., Galesville, WI 54630 Price per loaded mile for delivery $4.00 VENDOR: UNIVERSAL TRUCK EQUIPMENT CONTACT PERSON: DONNIE BJORGE ADDRESS: N15921 SCHUBERT RD., GALESVILLE, WI 54630 PHONE NO.: 608-539-4600 FAX NO.: 608-539-4800 E-MAIL ADDRESS: donnie@universaltruckequipment.com
AVL/GPS Hyd. Options PRICE SCHEDULE 9.0 Hydraulics VENDOR TO PROVIDE FOLLOWING DETAIL 9.50 - FINASSY - IX403 LS KIT-US-S (installed) (6950413) 9.51 - FINASSY - IX101 - US-SIM- MAG ANT (installed) (6950065) 9.52 - IX-50, US SIM (IX-50 US) 9.53 - Assembly, final IX-40, US SIM (IX-40 US) PRICE $959.00 PRICE $615.00 PRICE $485.00 PRICE $485.00 9.54 - Harness, PreCise, Power, IX-40 (IX-40 OBDII to power port adapter harness) PRICE $63.00 9.55 - ANTENNA - EXT - WIFI/GPS- PERMANENT MOUNT (2260012) 9.56 - ANTENNA - EXT - WIFI/GPS- MAGNETIC MOUNT (2261781) 9.57 - ANTENNA - EXT - UMTS/GPS- MAGNETIC MOUNT (2260040) PRICE $79.00 PRICE $58.00 PRICE $78.00 9.58 - ANTENNA KIT - EXT - UMTS/GPS- PERM MNT 5M CABLE RPSMA/SMA ADAPTER (2260052) PRICE $149.00 9.59 - ANTENNA - COVERT - GSM/GPS ADHESIVE MOUNT (2260041) 9.60 - CABLE - EXT - IO SERIAL- IX201/301/302/403 (2260006) 9.61 - CABLE - EXT - IO BREAKOUT- IX201/301/302 (2260007) 9.62 - ibutton - CAN - DRIVER ID (6950022) 9.63 - Kit, VDT, Supervisor (VDTSupervisorKit) 9.64 - KEY - DRIVER SSC5100 (CELL D,H) (9882A001) 9.65 - HYDAC PRESSURE SWITCH KIT DEUTSCH CONNECTOR 20FT HARNESS (installed) (6950009) PRICE $105.00 PRICE $13.00 PRICE $32.00 PRICE $213.00 PRICE $2,590.00 PRICE $28.00 PRICE $305.00
9.66 - ADJUSTABLE PRESSURE SWITCH 65-300 PSI (PS71-30-4MNZ-C-HC) (installed) PRICE $265.00 9.67 - TILT SWITCH W/ BRACKET Rev. B (Kit- Tilt Switch Rev. B) (installed) 9.68 - IMPACT SENSOR (installed) (1210070) 9.69 - FINASSY - ID101 - VDT (installed) (6950020) 9.70 - ACCESS POINT - AP-211 - ENTIR KIT (installed) (6950019) 9.71 - IFM PK6222, setting range of 75-1450 psi rated to 2900 psi 25 deg C to 80 deg C (IFM PK6222) (installed) PRICE $210.00 PRICE $248.00 PRICE $1,271.00 PRICE $1,943.00 PRICE $296.00 9.72 - KEY - UPGRADE - EVENT LOGGING SSC5100 (9873A001) (installed) PRICE $152.00 9.73 - Force - Cable - Adapter - Roadwatch to IX Box6-Pos M8 J1708 Tap (installed) (4430072) PRICE $178.00 9.74 - KIT, TABLET, MOUNT, ANTENNA (installed) (1103674) 9.75-6100 Event Log Authentication Module for Use With Other AVL (Installed) (ELA-MODULE) PRICE $1,140.00 PRICE $275.00 Delivery Starting Point Address N15921 Schubert Rd., Galesville, WI 54630 Price per loaded mile for delivery $4.00 VENDOR: UNIVERSAL TRUCK EQUIPMENT CONTACT PERSON: DONNIE BJORGE ADDRESS: N15921 SCHUBERT RD., GALESVILLE, WI 54630 PHONE NO.: 608-539-4600 FAX NO.: 608-539-4800 E-MAIL ADDRESS: donnie@universaltruckequipment.com