INTERNATIONAL MALLEABLE IRON PIPE FITTINGS & UNIONS PRICE SCHEDULE #101016 EFFECTIVE: OCTOBER 1, 2016 MADE IN BRAZIL, UNLESS NOTED 117 Gulick Street, Blossburg, PA 16912 www.wardmfg.com (800) 248-1027
MALLEABLE IRON 90 ELBOWS CLASS 150 Fig. # WI-1101, WI-1101-G Per 100 Black. 1/8 50 600 * 7 10.03 13.09 1/4 35 420 * 11 9.56 13.09 3/8 90 360 * 16 9.56 13.09 1/2 10 120 27 7.16 8.65 3/4 10 70 43 8.65 10.40 1 10 50 67 15.20 19.52 1-1/4 10 30 105 24.65 30.07 1-1/2 5 25 133 32.46 39.63 2 5 15 204 55.68 66.02 2-1/2 1 8 392 120.85 164.58 3 1 6 534 180.25 276.64 4 1 3 957 383.32 478.83 6 1 1 * 1963 1433.84 2029.24 1/4 x 1/8 40 480 * 9 18.67 22.08 3/8 x 1/8 105 420 * 13 21.63 27.86 3/8 x 1/4 90 360 * 14 13.77 19.70 1/2 x 1/4 60 240 * 18 13.39 16.19 1/2 x 3/8 60 240 * 21 13.08 15.16 3/4 x 3/8 40 160 * 30 17.92 23.34 3/4 x 1/2 10 90 35 13.56 17.64 1 x 3/8 25 100 * 39 28.29 36.59 1 x 1/2 10 70 46 18.41 23.86 1 x 3/4 10 60 56 17.34 22.51 1-1/4 x 1/2 10 50 66 37.43 46.23 1-1/4 x 3/4 10 40 76 32.03 45.32 1-1/4 x 1 5 35 85 28.23 37.74 1-1/2 x 1/2 15 60 * 76 47.30 59.25 1-1/2 x 3/4 5 35 90 46.28 58.03 1-1/2 x 1 10 30 106 46.28 58.03 1-1/2 x 1-1/4 5 25 121 46.28 58.03 2 x 1/2 10 40 * 100 68.06 82.23 2 x 3/4 5 25 117 68.06 82.23 2 x 1 12 24 131 66.74 80.61 2 x 1-1/4 10 20 158 66.74 80.61 2 x 1-1/2 9 18 170 58.65 70.42 2-1/2 x 1-1/2 6 12 * 221 163.66 257.79 2-1/2 x 2 6 12 * 270 160.84 229.53 3 x 2 4 8 * 358 259.89 362.47 3 x 2-1/2 4 8 * 435 259.89 362.47 4 x 3 1 2 * 744 445.42 www.wardmfg.com 2
MALLEABLE IRON 45 ELBOWS CLASS 150 Fig. # WI-1102, WI-1102-G Per 100 Black 1/8 50 600 * 5 14.50 19.74 1/4 30 360 * 10 14.81 17.57 3/8 75 300 * 15 13.47 17.52 1/2 10 140 28 11.70 13.47 3/4 10 90 41 14.27 18.85 1 5 55 63 18.19 21.61 1-1/4 5 35 94 31.82 39.45 1-1/2 10 30 124 39.25 47.03 2 5 15 193 59.11 70.18 2-1/2 12 12 * 284 166.82 237.72 3 10 10 * 429 216.56 345.59 4 4 4 * 756 420.75 579.21 6 1 1 * 1512 1433.84 2029.24 MALLEABLE IRON 90 STREET ELLS Fig. # WI-1103, WI-1103-G CLASS 150 Per 100 Black 1/8 60 720 * 6 14.48 18.60 1/4 10 300 9 14.48 17.99 3/8 10 200 16 14.48 17.99 1/2 10 130 25 14.84 18.57 3/4 10 90 38 14.48 17.99 1 25 50 67 20.81 24.51 1-1/4 5 35 98 31.82 41.19 1-1/2 5 25 133 42.41 50.73 2 5 15 128 68.79 87.96 2-1/2 5 10 * 362 169.83 238.53 3 8 8 * 533 259.16 360.06 4 4 4 * 935 422.07 594.35 www.wardmfg.com 3
MALLEABLE IRON 45 STREET ELLS CLASS 150 Fig. # WI-1104, WI-1104-G Per 100 Black 1/8 70 840 * 5 22.50 1/4 40 480 * 9 16.72 3/8 100 400 * 13 19.01 1/2 10 170 19 15.26 19.45 3/4 10 100 32 23.47 31.48 1 20 60 51 27.23 38.92 1-1/4 10 40 80 47.13 58.32 1-1/2 10 30 110 58.51 70.63 2 5 15 170 98.67 121.37 MALLEABLE IRON TEES CLASS 150 Fig. # WI-1105, WI-1105-G Per 100 Black 1/8 120 480 * 10 15.29 19.70 1/4 10 200 15 14.47 17.07 3/8 45 180 * 24 14.47 17.07 1/2 10 90 35 9.34 10.51 3/4 10 50 65 13.23 17.65 1 5 35 96 23.33 28.89 1-1/4 5 25 151 37.90 45.64 1-1/2 5 15 192 47.13 56.98 2 6 12 287 80.13 95.08 2-1/2 3 6 499 164.79 255.38 3 1 5 713 247.37 299.43 4 1 2 1176 580.80 708.00 6 1 1 * 2605 1659.45 2029.36 1/2 x 1/2 x 1/4 40 160 * 28 15.80 20.29 1/2 x 1/2 x 3/8 40 160 * 30 19.88 25.79 1/2 x 1/2 x 3/4 10 70 46 23.33 27.86 1/2 x 1/2 x 1 25 50 55 33.80 41.64 3/4 x 1/2 x 1/2 25 100 * 40 21.16 27.86 3/4 X 3/4 X 1/4 25 100 * 39 22.41 25.33 3/4 X 3/4 X 3/8 25 100 * 40 23.80 25.33 3/4 X 3/4 X 1/2 10 60 28 20.42 24.38 3/4 x 3/4 x 1 20 40 79 29.59 41.19 3/4 x 3/4 x 1-1/4 15 30 97 54.87 70.38 1 x 1/2 x 1/2 20 80 * 50 29.59 41.19 1 x 1/2 x 3/4 20 80 * 66 34.50 42.04 1 x 3/4 x 1/2 20 80 * 64 29.29 41.62 1 x 3/4 x 3/4 15 60 * 61 27.38 41.19 www.wardmfg.com 4
MALLEABLE IRON TEES CON'T 1 x 1 x 3/8 15 60 * 60 32.49 42.04 1 x 1 x 1/2 15 45 77 25.97 34.21 1 x 1 x 3/4 10 40 85 25.97 34.21 1 x 1 x 1-1/4 5 25 121 54.90 65.52 1 x 1 x 1-1/2 10 20 122 82.04 111.46 1 x 1 x 2 5 15 132 100.53 114.42 1-1/4 x 1/2 x 1 20 40 * 88 52.54 64.35 1-1/4 x 3/4 x 3/4 10 40 * 90 53.90 70.47 1-1/4 x 3/4 x 1 10 40 * 97 50.25 67.51 1-1/4 x 1 x 1/2 20 40 * 80 50.14 64.18 1-1/4 x 1 x 3/4 20 40 * 86 47.35 64.35 1-1/4 x 1 x 1 20 40 * 104 47.35 64.35 1-1/4 x 1-1/4 x 1/2 5 35 100 47.13 55.95 1-1/4 x 1-1/4 x 3/4 15 30 114 41.32 52.91 1-1/4 x 1-1/4 x 1 5 25 127 41.32 52.91 1-1/4 x 1-1/4 x 1-1/2 10 20 164 64.35 80.84 1-1/4 x 2 1 12 150 100.53 114.42 1-1/2 x 3/4 x 3/4 15 30 * 83 102.61 117.45 1-1/2 x 1 x 1 15 30 * 111 64.35 81.06 1-1/2 x 1 x 1-1/4 12 24 * 124 64.35 81.06 1-1/2 x 1-1/4 x 3/4 12 24 * 112 64.35 81.06 1-1/2 x 1-1/4 x 1 12 24 * 129 55.19 79.51 1-1/2 x 1-1/4 x 1-1/4 12 24 * 161 86.99 113.28 1-1/2 x 1-1/4 x 2 8 16 * 187 100.53 114.62 1-1/2 x 1-1/2 x 1/2 5 25 125 55.20 69.22 1-1/2 x 1-1/2 x 3/4 5 25 139 52.24 65.49 1-1/2 x 1-1/2 x 1 10 20 151 52.24 65.49 1-1/2 x 1-1/2 x 1-1/4 10 20 164 64.35 81.06 1-1/2 x 1-1/2 x 2 1 12 209 100.53 114.62 2 x 3/4 x 2 8 16 * 219 98.54 112.44 2 x 1-1/4 x 1-1/4 8 16 * 197 100.53 114.61 2 x 1-1/4 x 1-1/2 8 16 * 170 110.22 133.40 2 x 1-1/2 x 1 10 20 * 177 98.54 112.77 2 x 1-1/2 x 1-1/4 8 16 * 170 100.53 114.62 1 x 1-1/2 x 1-1/2 8 16 * 182 98.54 111.12 2 x 2 x 1/2 5 15 182 81.77 105.95 2 x 2 x 3/4 5 15 194 81.79 95.53 2 X 2 X 1 5 15 210 81.79 95.53 2 x 2 x 1-1/4 6 12 229 86.45 111.12 2 x 2 x 1-1/2 6 12 248 86.45 111.12 2 x 2 x 2-1/2 6 12 * 327 214.95 335.43 2-1/2 x 2 x 2 5 10 * 328 214.60 305.43 2-1/2 x 2-1/2 x 3/4 6 12 * 280 214.29 304.87 2-1/2 x 2-1/2 x 1 5 10 * 304 214.29 304.87 2-1/2 x 2-1/2 x 1-1/4 5 10 * 327 214.29 304.87 2-1/2 x 2-1/2 x 1-1/2 5 10 * 332 214.29 304.87 2-1/2 x 2-1/2 x 2 4 8 * 376 214.29 304.87 3 x 3 x 3/4 3 6 * 293 291.79 432.26 3 x 3 x 1 3 6 * 436 286.24 413.68 3 x 3 x 1-1/4 3 6 * 381 291.79 421.64 3 x 3 x 1-1/2 3 6 * 479 286.24 413.68 3 x 3 x 2 3 6 * 526 286.24 413.68 3 x 3 x 2-1/2 3 6 * 600 327.37 464.41 4 x 4 x 2-1/2 3 3 * 908 650.00 911.80 4 x 4 x 3 1 2 * 924 579.64 827.64 www.wardmfg.com 5
MALLEABLE IRON CROSSES CLASS 150 Fig. # WI-1107, WI-1107-G Per 100 Black 1/4 10 160 19 29.29 43.58 3/8 50 150 * 30 29.89 43.58 1/2 10 70 49 34.01 43.69 3/4 10 40 77 41.49 53.24 1 10 30 111 51.03 73.50 1-1/4 10 20 169 82.89 106.36 1-1/2 5 15 218 102.65 129.11 2 5 10 278 169.95 246.23 MALLEABLE IRON STRT & RED PIPE COUPLINGS CLASS 150 Fig. # WI-1121, WI-1121-G (STRAIGHT) & WI-1125, WI-1125-G (RED) Per 100 Black 1/8 70 840 * 6 14.09 16.33 1/4 10 300 10 11.93 15.20 3/8 40 480 * 13 11.93 15.20 1/2 10 150 19 9.70 12.21 3/4 10 100 33 11.45 14.10 1 10 70 49 17.33 23.25 1-1/4 15 45 76 22.18 32.01 1-1/2 5 35 95 29.65 36.44 2 10 20 157 43.20 53.20 2-1/2 8 16 * 231 117.64 162.51 3 12 12 * 361 158.95 217.16 4 3 6 * 581 317.04 461.27 1/4 x 1/8 50 600 * 7 11.60 14.31 3/8 x 1/8 35 420 * 10 11.60 14.47 3/8 x 1/4 30 360 * 11 11.60 14.31 1/2 x 1/8 75 300 * 16 11.51 16.10 1/2 x 1/4 75 300 * 16 10.57 13.05 1/2 x 3/8 60 240 * 16 10.00 12.21 3/4 x 1/8 70 210 * 20 13.47 16.48 3/4 x 1/4 45 180 * 23 13.09 16.15 3/4 x 3/8 45 180 * 21 13.09 16.15 3/4 x 1/2 10 120 27 11.45 14.28 1 x 1/4 45 135 * 32 20.29 28.64 1 x 3/8 30 120 * 34 20.60 29.27 1 x 1/2 10 80 41 17.74 23.80 www.wardmfg.com 6
MALLEABLE IRON STRT & RED PIPE COUPLINGS CON'T 1 x 1/2 10 80 41 17.74 23.80 1 x 3/4 10 80 41 17.74 22.08 1-1/4 x 1/2 5 55 51 25.56 37.48 1-1/4 x 3/4 5 55 51 22.18 30.26 1-1/4 x 1 5 45 73 22.18 30.26 1-1/2 x 1/2 5 45 74 32.49 44.09 1-1/2 x 3/4 10 40 77 36.62 39.00 1-1/2 x 1 20 40 93 32.49 39.00 1-1/2 x 1-1/4 5 35 95 28.03 36.87 2 x 1/2 10 28 117 52.94 63.63 2 x 3/4 10 28 123 46.58 63.63 2 x 1 5 25 127 44.09 53.20 2 x 1-1/4 5 25 140 46.58 56.19 2 x 1-1/2 8 24 152 40.74 53.20 2-1/2 x 1-1/4 10 20 * 183 118.44 164.32 2-1/2 x 1-1/2 7 14 * 224 121.14 167.71 2-1/2 x 2 7 14 * 240 103.94 164.55 3 x 1 6 12 * 311 165.11 222.76 3 x 1-1/4 6 12 * 297 165.11 222.76 3 x 1-1/2 6 12 * 299 162.03 218.55 3 x 2 6 12 * 324 134.36 206.58 3 x 2-1/2 5 10 * 370 162.03 218.55 4 x 2 3 6 * 548 324.83 473.03 4 x 2-1/2 3 6 * 550 324.83 473.03 4 x 3 3 6 * 571 324.83 473.03 MALLEABLE IRON CAPS CLASS 150 Fig. # WI-1124, WI-1124-G Per 100 Black 1/8 120 1440 * 4 9.40 12.13 1/4 80 960 * 5 9.40 12.13 3/8 60 720 * 8 9.40 11.76 1/2 10 200 14 7.18 9.03 3/4 10 130 24 9.70 13.05 1 10 70 39 11.70 14.31 1-1/4 10 50 62 15.29 20.81 1-1/2 10 40 80 20.80 26.58 2 5 35 132 27.22 33.59 2-1/2 20 40 * 160 67.61 106.91 3 24 24 * 236 100.53 129.52 4 6 12 * 397 156.86 257.27 6 2 4 * 1052 626.62 www.wardmfg.com 7
MALLEABLE IRON 90 ELBOWS A.A.R. CLASS 300 Fig. # WI-1161, WI-1161-G Per 100 Black 1/4 10 170 20 39.44 66.69 3/8 10 110 28 35.04 68.05 1/2 10 70 47 45.38 81.04 3/4 5 45 74 51.32 90.95 1 15 30 111 65.55 116.60 1-1/4 9 18 181 95.61 183.16 1-1/2 5 15 234 112.70 198.57 2 3 9 398 162.16 333.68 2-1/2 1 5 604 420.31 715.40 3 1 3 907 482.67 875.92 4 1 1 1798 1102.71 2545.59 MALLEABLE IRON 45 ELBOWS A.A.R. CLASS 300 Fig. # WI-1162, WI-1162-G Per 100 Black 1/4 10 180 19 58.65 78.94 3/8 10 130 29 58.65 78.94 1/2 10 80 45 65.30 120.29 3/4 5 50 64 72.59 139.11 1 10 30 98 80.32 152.01 1-1/4 10 20 154 128.73 235.95 1-1/2 5 15 223 167.81 305.25 2 5 10 341 253.52 422.81 2-1/2 2 6 520 550.80 1098.61 3 2 4 788 724.28 1443.95 4 1 2 1335 1645.03 2086.27 www.wardmfg.com 8
MALLEABLE IRON STREET 90 ELBOWS A.A.R. CLASS 300 Fig. # WI-1170, WI-1170-G Per 100 Black 1/4 180 360 * 15 46.66 70.18 3/8 10 140 26 52.28 70.18 1/2 10 80 38 60.90 137.51 3/4 5 50 60 86.56 146.03 1 5 35 100 101.50 191.00 1-1/4 5 20 149 139.65 249.45 1-1/2 4 16 205 172.61 320.68 2 1 9 339 268.64 501.21 MALLEABLE IRON TEES A.A.R. CLASS 300 Fig. # WI-1164, WI-1164-G Per 100 Black 1/4 10 130 25 49.67 94.90 3/8 10 80 39 52.57 96.71 1/2 10 50 67 66.95 121.04 3/4 10 30 99 72.32 133.32 1 10 20 171 86.90 164.30 1-1/4 7 14 238 124.53 234.55 1-1/2 5 10 316 145.26 243.93 2 1 6 539 214.36 389.96 2-1/2 1 4 796 506.66 1198.67 3 1 2 1202 742.80 1397.40 4 1 1 2300 2058.16 3489.47 3/4 x 1/2 5 35 87 106.71 177.02 1 x 1/2 5 25 121 130.47 211.35 1 x 3/4 5 25 129 130.47 232.51 1-1/4 x 1/2 12 24 * 202 181.62 211.76 1-1/4 x 3/4 4 16 189 173.60 308.55 1-1/4 x 1 4 16 206 180.22 308.55 1-1/2 x 1/2 10 20 * 233 221.10 298.34 1-1/2 x 3/4 10 20 * 245 221.10 298.34 1-1/2 x 1 2 12 249 211.33 298.34 1-1/2 x 1-1/4 1 10 290 231.44 486.89 2 x 1/2 6 12 * 353 280.94 420.08 2 x 3/4 6 12 * 361 280.94 420.08 2 x 1 5 10 * 395 280.94 327.36 2 x 1-1/4 1 8 401 340.65 709.06 2 x 1-1/2 1 7 467 316.79 561.02 2-1/2 x 2 1 4 686 776.81 993.84 3 x 2 1 3 945 1441.48 2641.19 www.wardmfg.com 9
MALLEABLE IRON COUPLINGS & REDUCERS A.A.R. CLASS 300 Fig. # WI-1166, WI-1166-G Per 100 Black 1/4 10 200 16 35.58 43.76 3/8 10 120 25 35.58 62.95 1/2 10 80 42 39.68 64.59 3/4 5 50 71 45.64 72.95 1 5 35 93 52.21 96.47 1-1/4 10 20 152 62.07 125.78 1-1/2 1 17 187 92.91 177.54 2 2 10 330 133.80 215.02 2-1/2 2 6 499 239.68 549.82 3 1 5 707 345.31 587.29 4 1 3 1177 459.32 1010.18 3/8 x 1/4 120 240 * 21 46.99 68.06 1/2 x 1/4 10 110 28 56.57 91.28 1/2 x 3/8 10 100 32 56.57 91.28 3/4 x 3/8 10 70 41 78.52 142.48 3/4 x 1/2 10 70 47 57.86 110.79 1 x 1/2 5 45 66 70.47 134.97 1 x 3/4 5 45 71 69.11 132.30 1-1/4 x 1/2 24 48 * 112 140.29 212.53 1-1/4 x 3/4 10 30 103 94.38 165.37 1-1/4 x 1 5 25 115 90.95 150.31 1-1/2 x 1/2 24 48 * 144 145.79 263.46 1-1/2 x 3/4 20 40 * 154 129.41 204.93 1-1/2 x 1 5 20 144 124.65 204.93 1-1/2 x 1-1/4 5 20 161 141.73 226.04 2 x 1/2 12 24 * 238 210.39 421.60 2 x 3/4 12 24 * 236 210.39 421.60 2 x 1 12 24 * 246 180.68 328.56 2 x 1-1/4 1 13 243 212.85 421.60 2 x 1-1/2 6 12 253 179.26 293.28 2-1/2 x 1-1/2 3 9 361 339.24 775.26 2-1/2 x 2 2 8 406 339.24 778.08 3 x 2 1 6 543 497.12 1270.76 3 x 2-1/2 1 5 607 516.15 1270.76 4 x 3 1 3 960 1049.01 1981.59 www.wardmfg.com 10
MALLEABLE IRON CAPS A.A.R. CLASS 300 Fig. # WI-1163, WI-1163-G Per 100 Black 1/4 10 300 9 33.49 41.08 3/8 10 220 15 36.42 44.61 1/2 10 120 23 36.17 65.48 3/4 10 80 37 45.64 78.27 1 10 40 60 59.85 107.11 1-1/4 10 30 91 66.33 127.08 1-1/2 6 24 113 96.91 178.17 2 1 15 195 134.59 246.53 2-1/2 1 9 311 252.36 567.49 3 1 6 471 348.25 774.82 4 1 4 28 571.96 1017.80 MALLEABLE IRON UNIONS BRASS TO IRON CLASS 150 Fig. # WI-463, WI-463-G Per 100 Black 1/8 60 240 * 13 51.69 61.03 1/4 20 240 * 21 49.19 58.92 3/8 40 160 * 24 33.17 39.19 1/2 40 80 38 31.69 39.60 3/4 5 55 61 37.77 47.00 1 20 40 78 49.36 58.48 1-1/4 10 20 134 65.48 79.48 1-1/2 10 20 160 79.95 101.80 2 6 12 262 120.81 135.97 2-1/2 4 8 449 291.12 378.29 3 3 6 603 353.44 537.53 4 2 4 * 866 873.96 1167.48 www.wardmfg.com 11
MALLEABLE IRON UNIONS BRASS TO IRON A.A.R. CLASS 300 Fig. # WI-459, WI-459-G Per 100 Black 1/8 200 400 * 23 85.88 103.41 1/4 10 130 30 80.54 103.41 3/8 10 100 44 81.48 105.45 1/2 10 50 59 65.92 100.01 3/4 10 30 110 72.99 108.45 1 8 24 138 95.30 143.83 1-1/4 5 15 202 155.47 200.58 1-1/2 5 10 296 162.77 241.46 2 4 8 416 201.59 289.83 2-1/2 1 5 681 649.99 808.50 3 1 3 974 840.90 1367.42 4 1 1 1831 2668.91 3429.55 CAST IRON PLUGS REGULAR CORED Fig. # WI-388, WI-388-G Per 100 Black 1/4 10 1000 3 6.16 10.04 3/8 10 600 6 6.16 10.04 1/2 10 350 11 6.50 12.58 3/4 10 220 17 6.50 12.58 1 10 110 29 8.21 13.77 1-1/4 10 80 43 10.35 21.22 1-1/2 5 55 58 14.40 28.64 2 5 35 95 20.56 36.36 2-1/2 1 20 166 37.48 70.93 3 1 14 258 51.43 100.63 4 1 7 478 107.92 208.86 6 1 2 1177 286.75 414.27 www.wardmfg.com 12
HEXAGON BUSHINGS Fig. # WI-383, WI-383-G Per 100 Black 3/8x1/4 10 750 3 12.79 18.42 1/2x1/4 10 400 8 12.79 18.42 1/2x3/8 10 500 6 12.79 18.42 3/4 x 3/8 10 250 14 12.56 21.14 3/4 x 1/2 10 250 11 11.60 17.06 1 x 1/8 50 200 * 21 14.50 20.06 1 x 1/4 50 200 * 20 15.54 22.51 1 x 3/8 50 200 * 19 15.96 35.29 1 x 1/2 10 140 23 11.93 20.42 1 x 3/4 10 150 18 11.93 19.29 1-1/4 x 1/4 30 120 * 30 20.20 32.52 1-1/4 x 3/8 30 120 * 27 17.92 32.52 1-1/4 x 1/2 10 100 34 17.14 28.57 1-1/4 x 3/4 10 80 39 15.37 26.01 1-1/4 x 1 10 100 31 15.37 26.01 1-1/2 x 1/4 25 75 * 40 23.64 41.32 1-1/2 x 3/8 25 75 * 38 23.64 41.32 1-1/2 x 1/2 25 75 * 43 19.52 37.75 1-1/2 x 3/4 15 75 46 19.52 37.75 1-1/2 x 1 5 65 50 17.12 34.02 1-1/2 x1-1/4 10 100 32 19.57 31.42 2 x 1/2 20 60 * 63 29.46 47.14 2 x 3/4 20 60 * 71 24.89 43.90 2 x 1 5 45 73 23.34 41.52 2 x 1-1/4 1 40 82 23.34 41.52 2 x 1-1/2 1 45 71 26.01 36.39 2-1/2 x 3/4 15 30 * 96 42.44 68.26 2-1/2 x 1 15 30 * 101 42.44 68.26 2-1/2 x 1-1/4 15 30 * 111 42.44 68.26 2-1/2 x 1-1/2 1 25 129 39.53 66.95 2-1/2 x 2 1 30 103 39.19 59.37 3 x 1 12 24 * 147 58.70 90.14 3 x 1-1/4 12 24 * 176 58.70 90.14 3 x 1-1/2 12 24 * 167 57.53 88.33 3 x 2 1 18 189 53.75 80.13 3 x 2-1/2 1 18 176 54.60 84.74 3-1/2 x 3 8 16 * 187 102.65 156.86 4 x 1-1/2 5 10 * 240 112.62 188.90 4 x 2 5 10 * 300 106.56 188.90 4 x 2-1/2 1 10 312 106.56 188.89 4 x 3 1 10 317 106.56 176.40 www.wardmfg.com 13
CAST IRON FLOOR FLANGES CLASS 150 Fig. # WI-1190, WI-1190-G Per 100 Black 1/2 20 60 38 26.01 55.17 3/4 5 55 57 28.03 61.59 1 10 40 82 36.35 67.74 1-1/4 10 30 93 38.92 77.13 1-1/2 5 25 117 42.44 96.25 2 7 14 195 55.32 126.80 www.wardmfg.com 14
TERMS AND CONDITIONS OF SALE: 1. PRICES: This price sheet supersedes all previous issues. Prices in price sheets are subject to change without notice. Prices apply only to standard sizes as listed in catalog. 2. APPROVAL & ACCEPTANCE OF ORDERS: All orders are accepted on the basis of prices in effect at the time of shipment. 3. TAXES: Any Manufacturer or Sales Tax payable on the transaction under any effective statute will be added to the prices and terms quoted, unless a valid exemption certificate is on file. 4. CREDIT TERMS: Two percent cash discount tenth prox., - Net 30 days. Unless otherwise stated. 5. DELIVERY & SHIPMENT OF GOODS: All goods are shipped at buyer s risk. Shipments should be carefully examined upon delivery and before the carrier s delivery receipt is signed. If any loss or damage is evident, the buyer should make an appropriate notation on the delivery receipt and insist that the carrier s driver initial such exception. The contents of all packages should be carefully examined for concealed damage as soon as possible after delivery, so that the carrier can be requested, within 48 hours after delivery, to arrange for prompt inspection of the damaged goods. Completion of all orders accepted and fulfillment of all agreements or contracts entered into are subject to any delay which might be occasioned by labor disputes, fires,accidents, embargoes, trade restrictions, governmental directives or other causes beyond our control. All promises of shipment will be as closely estimated as possible. We use our efforts in every case to ship within the time promised, but cannot guarantee to do so. All claims for shortage must be made on receipt of goods. We prove our count by weighing the package. Claims for shortage are subject to that test. Typographical, clerical, arithmetical errors or omissions in orders, invoices, quotations, price schedules, acknowledgments, or other documents are subject to correction. 6. RETURN OF GOODS: No goods will be taken back and credited without prior approval and issuance of a return goods authorization (RGA) number. All fittings returned with our permission must be goods sold by Ward Manufacturing, LLC, and in clean saleable condition. Credit will only be allowed on the basis of prices agreed upon. If product returned is a result of a customer ordering error or overstocking situation, the credit will be less 20 percent to cover handling costs, less any costs of returning to a saleable condition, and less transportation charges on original and return shipments. Orders for special goods are not subject to cancellation for any reason after work has been started on them, except upon agreement to make payment for all work which has been performed. 7. WARRANTY: Seller warrants the material to be free of defects in material and workmanship, under normal use, proper maintenance and proper operation, for a period of one year from date of delivery to a common carrier for shipment to buyer or his designated agent. The obligation of the seller Is limited to (1) repair of the material, or (2) replacement of any component or components proven defective in material or workmanship, or (3) refund of the purchase price. Seller shall have no liability for the cost of removal or reinstallation with respect to any replaced or repaired product. The election of said remedies shall be determined by seller in its sole discretion and shall be considered final disposition. All implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed and excluded. This warranty is In lieu of all other warranties, guarantees, agreements and similar obligations of seller; in no event shall seller be liable for consequential or Incidental damages. 8. FREIGHT TERM: Shipments of $1,500 net or more will be prepaid in the continental U.S. (except Alaska). We reserve the right to choose shipping point and carrier. 9. CARTON & BOX QUANTITY ADJUSTMENT: On orders received for less than master carton or box quantities, we reserve the right to adjust to the next carton or box quantity above the number of pieces shown on the order. Items subject to adjustment are identified with stars in the price sheet. 10. WEIGHTS: The weights per piece or per 100 pieces given in the price sheet, catalogs, and quotations are not guaranteed, but are approximate and for your convenience. 12. SPECIAL CONDITIONS: Any additional cost incurred in packaging or in making any special tests or inspection requested by Buyer in addition to those commercially supplied by Ward Manufacturing, LLC., will be charged to Buyer. Such tests and inspections will be made at the factory before date of shipment. Orders for fittings or parts will be subject to a net minimum invoice charge of $50.00 Net plus applicable handling and freight charges. 13. US EXPORT COMPLIANCE: The products sold by Ward Manufacturing, LLC. may be subject to the export control laws and regulations of the United States Government. Buyer may not make any disposition of such products, by way of sale, export, re-export, transshipment or otherwise, except as permitted under applicable U.S.law. www.wardmfg.com 15