MIDI Twin Booster Our team of engineers will work proactively with your engineers to design a product to meet the specific needs of your application. Specific Feature: Smaller capacity booster based on standard compact twin booster aimed at 80 120 HP machines Simplified design and smaller size give cost advantages over larger boosters in the Carlisle booster family. Typical features include: Patented design for mineral oil single/twin pedal braking systems providing a boosted, progressive pedal feel. Generic design enables performance to be easily matched to most agricultural and industrial applications. Self bleed design keeps booster purged of any ingressed air Integrated master cylinder, booster and reservoir design less than 165mm long PTFE seal technology tested to 1,000,000 cycles Boost ratios from 3:1 to 5:1 Range of master cylinder diameters from 25.4 to 28.5mm Supply pressure range 15 bar to 25 bar (to be supplied by vehicle) with a minimum flow rate of 10L/min Temperature range -30C to 100C No reservoir required uses supply oil for braking or clutch systems Range of metric or imperial ports Large variety of pushrod lengths and thread sizes available Reduced stroke of 28mm Carlisle Brake Products (UK) Ltd Omega 500 Unit, Mamhilad Technology Park Pontypool, NP4 0JJ United Kingdom Part of Carlisle Industrial Brake & Friction Tel: +44 (0)1495 767300 Email: info@carlislebrake.co.uk www.carlislebrake.co.uk
Ball & Ramp Brake Our team of engineers will work proactively with your engineers to design a product to meet the specific needs of your application. Typical features include: Available for both dry and oil-immersed braking system Available in diameters ranging from 100mm to 350mm High Efficiency Low Cost Simple mechanical brake/park brake solution Carlisle Brake Products (UK) Ltd Omega 500 Unit, Mamhilad Technology Park Pontypool, NP4 0JJ United Kingdom Part of Carlisle Industrial Brake & Friction Tel: +44 (0)1495 767300 Email: info@carlislebrake.co.uk www.carlislebrake.co.uk
Tandem Twin Booster Our team of engineers will work proactively with your engineers to design a product to meet the specific needs of your application. Additional Feature: Tandem Master Cylinder design provides pressure balanced, independent, dual circuit braking, four wheel braking/trailer braking signal. Typical features include: Patented design for mineral oil single/twin pedal braking systems providing a boosted, progressive pedal feel. Generic designa enables performance to be easily matched to most agricultural and industrial vehicle applications. Self bleed design keeps booster purged of any ingressed air Integrated master cylinder, booster and reservoir design less that 200mm long. PTFE seal technology tested to 1,000,000 cycles Boost ratios from 2.65:1 to 6.2:1 Range of master cylinders diameters from 25.4 to 35mm Supply pressure range 15 bar to 40 bar (to be supplied by vehicle) with minimum flow rate of 10L/min. Temperature range -30C to 100C No reservoir requires-uses supply oil for braking or clutch systems Range of metric or Imperial ports Large variety of push rod lengths and thread sizes available Carlisle Brake Products (UK) Ltd Omega 500 Unit, Mamhilad Technology Park Pontypool, NP4 0JJ United Kingdom Part of Carlisle Industrial Brake & Friction Tel: +44 (0)1495 767300 Email: info@carlislebrake.co.uk www.carlislebrake.co.uk