1
24 W x 18 D Tub Shelf Carts STC111 Top shelf is reinforced with an aluminum bar Tub shelves are 2 3 /4'' deep STC Carts STC carts shelves are 24 wide by 18 deep Aluminum bar molded into the top shelf for added support Push handle molded into top shelf Shelves are available in black, gray, blue, red and green Available with 2, 3 or 4 shelves Weight capacity 400 lbs. Easy assembly with included rubber mallet STC and TC legs are available in black and gray. Use GY when ordering gray legs. TC Carts TC carts shelves are 32 wide by 24 deep Two aluminum bars are molded into each shelf for added support Push handle molded into top shelf Shelves are available in black, gray, blue, red and green Available with 2, 3 or 4 shelves Weight capacity 400 lbs. Easy assembly with included rubber mallet STC and TC carts shelves are available in black, gray, red, blue and green. Use the two letter code when ordering color. (no code) (RD) (GN) (GY) (BU) All shelves are reinforced with two aluminum bars Tub shelves are 2 3 /4'' deep Easy roll 4'' Easy roll 4'' STC111 - Three tub shelf utility cart with 4, two with locking brake. 24 W x 18 D x 38 H Wt. 29 lbs. Shelf clearance 12. GNTC11 - Two tub shelf utility cart with 4, two with locking brake. 32 W x 24 D x 371/2 H Wt. 41 lbs. Shelf clearance 25. GNTC11 Polyethylene legs and shelves will never rust, dent, scratch or discolor. They will not be affected by acids, solvents, water or petroleum products. 32 W x 24 D Tub Shelf Carts RDSTC11 - Two tub shelf utility cart with 4, two with locking brake. 24 W x 18 D x 381/2 H Wt. 23 lbs. Shelf clearance 26. GYTC111 - Three tub shelf utility cart with 4, two with locking brake. 32 W x 24 D x 381/2 H Wt. 61 lbs. Shelf clearance 11. RDSTC11 BUSTC211 BUSTC211 - Flat top shelf middle and bottom tub shelf utility cart with 4, two with locking brake. 24 W x 18 D x 381/2 H Wt. 31 lbs. Shelf clearance 12. TC21 - Flat top shelf and bottom tub shelf utility cart with 4, two with locking brake. 32 W x 24 D x 36 H Wt. 43 lbs. Shelf clearance 25. TC111 TC21 2 3
24 W x 15 3 /4 D Service Carts MTC25N MTC30N MTC20/N Tub top shelf 25'' Clearance between shelves Easy roll 4'' MTC34F/N MTC25D/N MTC Carts Feature: 4 Swivel, two with locking brake 24 W x 153/4 D shelf size Overall capacity 400 lbs. Locking lid available MTC20N - Two shelf service cart with top storage tray and bottom flat shelf. 34 H weight 27 lbs. MTC25/N - Three shelf service cart with middle and bottom flat shelves and one top storage tray. 34 H weight 31 lbs. MTC34F/N - Three shelf service cart with top and bottom flat shelves and one middle storage tray. 40 H weight 35 lbs. MTC30N - Three shelf service cart with top and middle storage trays and bottom flat shelf. 34 H weight 30 lbs. MTC25D/N - Three shelf service cart has top storage tray with six tray dividers and two flat shelves. 34 H weight 32 lbs. MTCLL locking lid available for all MTC units All Carts Feature: Molded legs and shelves will never scratch, dent or rust Heavy-duty high density polyethylene construction Integral push handle molded into top shelf Quiet easy rolling 400 lb. weight capacity MTC30C/N - Service cart with locking cabinet, one top tray and two flat shelves. Includes 4 swivel, two with locking brake. 24 W x 153/4 D x 33 H. Weight 53 lbs. LE48C/N - Service cart with locking cabinet and three flat shelves. Includes 4 swivel, two with locking brake. Weight 87 lbs. 32 W x 24 D x 48 H. LE34C/N - Service cart with locking cabinet and three flat shelves. Includes 4 swivel, two with locking brake. Weight 52 lbs. 24 W x 18 D x 34 H. HE38 - Large capacity two shelf service cart with 4 swivel, two with locking brake. 32 W x 24 D x 34 H. Weight 37 lbs. HE33 - Large capacity three shelf service cart with 4 swivel, two with locking brake. Weight 42 lbs. 32 W x 24 D x 33 H. Weight 37 lbs. Locking steel cabinet LE48C/N HE38 MTC30C/N Easy roll 4 LE34C/N HE33 Utility Carts 4 5
Heavy-Duty Body Shop Carts 8'' Foam rubber TC221FR All shelves are reinforced with two aluminum bars 600 Lb. capacity 32 W x 24 D Shelves All Carts On This Page Have a 600 Pound Capacity! Polyethylene legs and shelves will never rust, dent, scratch or discolor. They will not be affected by acids, solvents, water or petroleum products. All Carts Feature: Aluminum bars molded into shelves for added support Push handle molded into top shelf Easy assembly with included rubber mallet TC221FR - Heavy duty cart with a flat top and middle shelf and tub bottom shelf. Two aluminum bars molded into all shelves for added support. Includes heavy duty 8 foam rubber. Shelf clearance 11 32 W x 24 D x 351/2 H 60 lbs. Overall weight capacity 600 lbs. SPTC211/N - Heavy duty cart with a flat top shelf and tub middle and bottom shelves. Two aluminum bars molded into all shelves for added support. Includes 8 semi-pneumatic tires. Shelf clearance 11 32 W x 24 D x 37 H. Overall capacity 600 lbs. Weight 100 lbs. PTC21/N - Heavy duty cart with a flat top shelf and tub bottom shelf. Includes 8 semi-pneumatic tires. Two aluminum bars are molded into each shelf for added support. Shelf clearance 25 32 W x 24 D x 36 H 67 lbs. Overall capacity 600 lbs. LPT Carts Feature: Large tub shelves for plenty of storage Small tub top shelf for parts and supplies Perfect for transportation of tools, parts and supplies 400 Lb. weight capacity Polyethylene legs and shelves will not rust, scratch, dent or discolor Quiet and easy rolling 4, two with brake Available with locking lid for top tub shelf Flat work surface for paperwork or inventory computer LPT44 - Stand-up tool/ utility cart with flat work surface area for convenience, two large tub base shelves for plenty of storage, and a small top tub shelf for additional parts and accessories. Comes with 4, two with locking brake. 32 W x 24 D x 44 H. Weight 54 lbs. LPT42 - Stand-up tool/ utility cart with flat work surface area for convenience, large tub base shelf for plenty of storage, and a small tub top shelf for additional parts and accessories. Comes with 4, two with locking brake. 32 W x 24 D x 42 H. Weight 51 lbs. Three shelf Shown with optional locking lid LPT44 MTCLL locking lid available for LPT42 and LPT44 Four shelf LPT44 Parts & Supply Carts Polyethylene legs and shelves will never rust, dent, scratch or discolor. They will not be affected by acids, solvents, water or petroleum products. SPTC211/N 32 W x 24 D Shelves PTC21/N 32 W x 24 D Shelves LPT42 6 7
Multi-Purpose Carts 42.5'' From Floor 16.5'' From Floor Cabinet is 19''W x 16 3 /4''D x 17''H Black Red Also available with: Dual Cabinet WT50 Yellow Blue Drawer is 19''W x 14 1 /2''D x 5''H WT42C-WTD Gray Open Shelves WT42 Orange WT42C-WTD Multi-Purpose Utility Carts Constructed from an engineered thermoplastic resin that will not chip, warp, crack, rust, peel or mar cars finish 18 D x 24 W shelves have a 1/4 safety retaining lip. Four 4 rubber silent roll, full swivel, ball bearing. Two feature brakes. Cart will hold 300 lbs of evenly distributed weight. Molded handle in top shelf. Locking Cabinet secures your equipment and is constructed of 20 gauge steel with a black powder coat paint finish. Two sets of keys are provided for the cabinet and drawer. Keys are coordinated matched sets. Optional 3-Outlet UL approved electrical (part# 51911) WT42C-WTD - This mobile utility cart is ideal for garage environments, both home and commercial. The lower cabinet will hold and secure multiple larger items, while the drawer easily holds smaller hand tools. Wt. 57 lbs. WT50 - Same features as the WT42C with the addition of a second locking steel cabinet. Wt. 65 lbs. WT42 - Same features as the WT42C without the locking steel cabinet. Wt. 29 lbs. WT16SC Mobile Seat With Lockable Storage Drawer Ideal for Garage and work shop applications. WT-D Storage Drawer - This 19 W x 141/2 D x 5 H Steel Key-locking pullout drawer is great for storing tools! Four 4 full-swivel, ball bearing, two locking. 24 W x 18 D Thermoplastic shelves with 2.5 thick foam padded seat cushion. Choice of Orange, Blue, Red, Gray, Yellow, Or Black Shelves. Overall capacity 325 lbs. WT16SC - This sturdy mechanics seat has been designed to accommodate both comfort and practicality in a garage environment. It is ideal for body and fender work, auto detailing and brake jobs. The seat itself has no sharp corners and will not transfer to paint on contact. Wt. 36 lbs. WT1422SC Mobile Seat With Multiple Height Options Ideal height for rocker panel work to bench height for the shop. Includes the legs necessary to make three seat heights; 14, 181/2, & 221/2. Four 4 full-swivel, ball bearing, two locking. 24 W x 18 D Thermoplastic shelves with foam padded seat cushion. Choice of Orange, Blue, Red, Gray, Yellow Or Black Shelves. Overall capacity 325 lbs. WT1422SC - Same features as the WT16SC. Wt. 30 lbs. Orange Blue Red Gray Yellow Black 22 Height WT16SC Adjustable Height Garage Seat Includes 3 sets of legs to make the the seat heights shown below. WT1422SC 14 Height 325 Lb. capacity 18 1/2 Height Mechanics Seats 8 9
Mobile Shelving Detail Carts ATC332 WT78NH Plastic tub shelves will not rust, dent or stain Sturdy metal frame 3'' High roll 76 Tall LE34VN 24 W x 18 D Shelves Polyethylene legs and shelves will never rust, dent, scratch or discolor. They will not be affected by acids, solvents, water or petroleum products. 60 Tall 421/2 Tall ATC332 - Three shelf compact adjustable utility cart constructed of blow molded plastic with metal frame. 22 W x 151/2 D x 32 H. Complete with 3 heavy duty, 2 with brake. Red color only. Weight 20 lbs. Overall capacity 200 lbs. evenly distributed weight. LE34VN - Three shelf utility cart with 4, two with locking brake. Top shelf has aluminum bar molded in for added strength. Clearance between shelves is 12. 24 W x 18 D x 34 H 30 lbs. Overall capacity 400 lbs. Multi-Purpose Utility Shelving Constructed from an engineered thermoplastic resin that will not chip, warp, crack, rust, or peel. 18 D x 24 W shelves have a 1/4 safety retaining lip. Four 4 Rubber Silent Roll, Full swivel, ball bearing. Two with brake. Shallow depth (18 ), makes this a great space saving storage unit. No handle so shelving can be positioned close together. Overall capacity 400 lbs. This shelving has no sharp corners and is constructed of injection molded thermoplastic. The low profile depth makes them ideal for versatile storage that does not take up a large space in your garage. Shelves are available in your choice of blue, red or black. AVJ Carts Feature: Roll formed shelves with powder coat paint finish in black, red, yellow, royal blue and green Adjustable height from 24 to 42 in 2 increments Easy 4 bolt assembly Tables are robotically arc welded Cable pass through holes. 1 4 Retaining lip around each shelf 3-outlet, 15 UL and CSA listed electric assembly with cord plug snap 4 ball bearing, two with locking brake Non-slip safety mat for top shelf Shelves are 24 W x 18 D Overall capacity 400 lbs. AVJ42KB - Compact steel mobile workstation with pull-out shelf. Wt. 50 lbs. AVJ42 - Compact steel mobile workstation. Wt. 50 lbs. AVJ42KBDL - Compact steel mobile workstation with pull-out shelf and two drop leaf side shelves. Wt. 50 lbs. Adjusts in height from 24''to 42'' in 2'' increments All AVJ carts on this page are available in: Black, Red, Yellow, Royal Blue and Green The AVJ42KBDL features drop leaf side shelves that add 22'' of workspace to the top shelf. AVJ42KB AVJ42 Non-slip safety mat for top shelf Steel Service Department Carts WT60NH WT42NH AVJ42KBDL 10 11
Service Department 12 Luxor 2245 Delany Road Waukegan, IL 60087 Phone: (847) 244-1800 Toll Free: (800) 323-4656 Fax: (800) 327-1698 E-mail: sales@luxorfurn.com www.luxorfurn.com