Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Admissible operating pressure [bar] at design temperature [ C] Material PN -60-10 20 100 150 200 250 300 350 400 410 420 430 440 450 460 470 480 490 500 510 520 530 540 550 560 570 580 590 600 1.0619 4) 16 16,0 16,0 16,0 15,0 14,0 13,0 11,0 10,0 8,0 25 25,0 25,0 25,0 23,0 22,0 20,0 17,0 16,0 13,0 40 40,0 40,0 40,0 37,0 35,0 32,0 28,0 24,0 21,0 1.0460 10 10,0 10,0 10,0 10,0 9,7 8,5 7,5 6,3 5,1 4,9 4,6 4,4 4,2 3,9 3,5 2,9 2,4 16 16,0 16,0 16,0 16,0 15,1 13,2 11,8 9,9 8,0 7,6 7,3 6,9 6,5 6,1 5,4 4,5 3,7 25 25,0 25,0 25,0 25,0 24,5 21,5 19,2 16,1 13,0 12,4 11,8 11,2 10,6 10,0 8,8 7,4 6,1 40 40,0 40,0 40,0 40,0 39,5 34,6 30,9 26,0 21,0 20,0 19,0 18,0 17,1 16,1 14,2 11,9 9,8 63 63,0 63,0 63,0 63,0 60,3 52,7 47,1 39,6 32,0 30,5 29,0 27,5 26,0 24,5 21,7 18,1 14,9 100 100,0100,0100,0100,0 94,0 82,0 74,0 62,0 50,0 48,0 45,0 43,0 41,0 38,0 34,0 28,0 23,0 1.0566 2)3) 10 10,0 10,0 10,0 10,0 10,0 9,0 8,0 7,0 16 16,0 16,0 16,0 16,0 15,0 14,0 13,0 11,0 25 25,0 25,0 25,0 25,0 24,0 22,0 20,0 17,0 40 40,0 40,0 40,0 40,0 39,0 35,0 31,0 28,0 63 63,0 63,0 63,0 63,0 61,0 55,0 49,0 44,0 100 100,0100,0100,0100,0 96,0 88,0 79,0 70,0 Range of application 1.5415 10 12,0 12,0 12,0 11,5 10,6 9,1 8,8 8,5 8,4 8,3 8,3 8,2 8,2 8,1 8,0 8,0 7,0 5,4 4,1 3,3 2,6 16 12,0 19,0 19,0 17,9 16,5 14,2 13,7 13,2 13,1 13,0 12,9 12,8 12,7 12,6 12,5 12,5 10,9 8,5 6,5 5,1 4,1 25 30,0 30,0 30,0 29,1 26,8 23,0 22,2 21,5 21,3 21,2 21,0 20,9 20,7 20,5 20,4 20,2 17,7 13,8 10,5 8,3 6,6 40 48,0 48,0 48,0 47,0 43,2 37,1 35,8 34,6 34,4 34,1 33,9 33,6 33,4 33,1 32,9 32,6 28,5 22,2 16,9 13,3 10,7 63 77,0 77,0 77,0 71,6 65,9 56,5 54,6 52,7 52,4 52,0 51,6 51,2 50,9 50,5 50,1 49,7 43,4 33,9 25,8 20,3 16,3 100 120,0 120,0 120,0 112,0 103,0 88,0 85,0 82,0 82,0 81,0 81,0 80,0 79,0 79,0 78,0 78,0 68,0 53,0 40,0 32,0 25,0 1.7335 10 12,1 12,1 12,1 12,1 12,1 12,1 11,2 10,6 10,0 9,8 9,7 9,6 9,5 9,4 9,3 9,2 9,2 9,1 8,3 7,0 5,5 4,5 3,6 2,8 2,3 1,9 16 19,0 19,1 19,0 19,0 19,0 18,9 17,5 16,5 15,6 15,4 15,2 15,0 14,8 14,6 14,5 14,4 14,3 14,2 12,9 10,9 8,6 7,0 5,7 4,4 3,6 2,9 25 30,0 30,0 30,0 30,0 30,0 30,0 28,4 26,8 25,3 25,0 24,7 24,4 24,1 23,8 23,6 23,5 23,3 23,2 21,0 17,7 14,0 11,4 9,2 7,2 5,9 4,8 40 48,0 48,0 48,0 48,0 48,0 48,0 45,7 43,3 40,8 40,3 39,8 39,3 38,8 38,8 38,1 37,8 37,6 37,3 33,9 28,5 22,5 18,4 14,8 11,6 9,5 7,7 63 77,0 77,0 77,0 77,0 77,0 75,3 69,7 65,9 62,2 61,4 60,6 59,9 59,1 58,4 58,0 57,6 57,3 56,9 51,6 43,4 34,4 28,0 22,6 17,6 14,5 11,8 100 120,0120,0120,0120,0120,0118,0109,0103,0 97,0 96,0 95,0 94,0 92,0 91,0 91,0 90,0 89,0 89,0 81,0 68,0 54,0 44,0 35,0 28,0 23,0 18,8 1.7380 10 12,0 12,0 12,0 12,0 12,0 12,0 12,0 11,2 10,6 10,4 10,3 10,2 10,1 10,0 9,8 9,7 9,6 9,2 8,2 7,1 6,2 5,4 4,7 4,1 3,5 3,1 2,7 2,3 2,0 16 19,0 19,0 19,0 19,0 19,0 19,0 19,0 17,0 17,0 16,0 16,0 16,0 16,0 16,0 15,0 15,0 15,0 14,0 13,0 11,0 10,0 8,0 7,0 6,0 5,0 5,0 4,0 4,0 3,0 25 30,0 30,0 30,0 30,0 30,0 30,0 30,0 28,0 27,0 27,0 26,0 26,0 26,0 25,0 25,0 25,0 24,0 23,0 21,0 18,0 16,0 14,0 12,0 10,0 9,0 8,0 7,0 6,0 5,0 40 48,0 48,0 48,0 48,0 48,0 48,0 48,0 46,0 43,0 43,0 42,0 42,0 41,0 41,0 40,0 40,0 39,0 38,0 33,0 29,0 25,0 22,0 19,0 17,0 14,0 13,0 11,0 9,0 8,0 63 77,0 77,0 77,0 77,0 77,0 77,0 75,0 70,0 66,0 65,0 64,0 64,0 63,0 62,0 61,0 61,0 60,0 57,0 51,0 44,0 39,0 34,0 29,0 26,0 22,0 19,0 17,0 14,0 13,0 100 120,0120,0120,0120,0120,0120,0118,0109,0103,0102,0101,0 99,0 98,0 97,0 96,0 95,0 94,0 89,0 79,0 69,0 61,0 53,0 46,0 40,0 34,0 30,0 26,0 22,0 20,0 1) Operating temperature = design temperature minus temperature surcharge acc. to DIN regulations. 2) At temperature > 50 C only applicable for short-time service. 3) In case of stainless steel bolts (DIN material code A4-70) with > 8 x d bolt length the strength characteristics acc. to table 6 of DIN 267 part 11 have been considered. 4) Flange version PN 10-40 1) 3) Attention: The following pressure rate table is only valid on condition that correspondingly dimensioned piping connections have been applied. In case of nominal (PN) flanges respectively pressure (PN) butt weld ends the corresponding nominal pressure rate table (former DIN 2401) limits the range of application. 40 6100.1.09.06 Technical alterations reserved
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Standard features Die-forged body and bonnet Split wedge = Type 700 JJ Flexible wedge = Type 700 HJ Full bore, exception DN 65/50 and DN 125/100 Outside screw and yoke Yoke sleeve Option Standard features GA Split wedge / Flexible wedge Inside screw Non-rising turning stem Materials 1.0460 1.0619 only flange version PN 10-40 1.0566 1.5415 1.7335 1.7380 Further materials on request Fields of application Chemical industries, power plants, ship building and other Pressure and temperature ratings Pressure rating up to 100 bar Acc. to PERSTA PD 10 up to 120 bar Temperature rating up to +600 C Design Highlights The main valve body is one-piece die-forged incorporating the bonnet flange and the guide for the shut-off device Bolted bonnet with reduced shaft bolts Polished stem shaft with a surface roughness of max. 2 μm Hard faced seats (valve body and shut-off device). Hardness app. 35-37 HRC Benefits Die-forged parts, compared with cast steel parts are generally free from porosity and shrink holes. The special of the valve body minimizes the existance of welding seams To improve the stress capability when temperature and pressure fluctuate Minimum wear to the gland packing compared with ground stem surfaces Extremely resistant to wear Technical alterations reserved 6100.1.09.06 41
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 611 613 600 605 510 530 511 590 464 461 440 420 451 200 190 170 160 400 Stroke 360 361 363 100 700 GA 42 6100.1.09.06 Technical alterations reserved
Gate valves Gate valve 700 HJ/JJ (GA PN 10-40) PN 10-100 DN 50-150 Pos. Component 1.0619 (11) 1.0460 (21) 1.0566 (25) 1.5415 (42) 1.7335 (44) 1.7380 (45) PN 10-40 100 Body 1.0619 1) 1.0460 1) 1.0566 1) 1.5415 2) 1.7335 2) 1.7380 2) 160 Gasket Graphite 4) Graphite 4) Graphite 4) Graphite 4) Graphite 4) Graphite 4) 170 Stud 1.7709 1.7709 A4-70 1.7709 1.7709 1.7709 190 Hexagonal nut 1.7258 1.7258 A4-70 1.7258 1.7258 1.7258 200 Bonnet 1.0460 1.0460 1.0566 1.5415 1.7335 1.7380 360/361 Disc 1.0460 3) 1.0460 3) 1.0566 3) 1.5415 2) 1.7335 2) 1.7380 2) 363 Pressure piece 1.4021 1.4021 1.4021 1.4021 1.4021 1.4021 400 Stem 1.4021 1.4021 1.4571 1.4122 1.4122 1.4122 420 Packing Graphite Graphite Graphite Graphite Graphite Graphite 440 Gland flange 1.0460 1.0460 1.4571 1.0460 1.0460 1.0460 451 Grooved pin St St 1.4571 St St St 461 Eye bolt 1.1181 1.1181 A4-50 1.1181 1.1181 1.1181 464 Hexagonal nut 1.1181 1.1181 A4-70 1.1181 1.1181 1.1181 510 Yoke sleeve 1.0718 1.0718 1.0718 1.0718 1.0718 1.0718 511 Roller bearing WLSt WLSt WLSt WLSt WLSt WLSt 530 Yoke nut 1.0718 1.0718 1.0718 1.0718 1.0718 1.0718 590 Grease nipple 5.8 5.8 5.8 5.8 5.8 5.8 600 Handwheel 0.7040 0.7040 0.7040 0.7040 0.7040 0.7040 605 Key 1.0060 1.0060 1.0060 1.0060 1.0060 1.0060 611 Hexagonal pipe nut St St St St St St 613 Screw pin 45H 45H 45H 45H 45H 45H Spare parts Materials 1) Welded on with Cr17 2) Welded on with Stellite 3) Welded on with 18/8 4) DN 150 grooved with graphite layer Attention: Ki-Gate-Valve 700 GA only in material 1.0460 Dimensions/mm PN PN PN PN PN PN 10-25 40-100 10-40 63-100 10-40 63-100 DN L L H H Stroke D D DN Weights/kg and Kvs-values Flange Flange Flange Flange Flange Flange BW BW Kvs PN 10-25 PN 40 PN 10-25 PN 40 PN 63 PN 100 PN10-40 PN63-100 (m3/h) GS-C25N GS-C25N 50 250 250 337 337 63 180 180 65/50 270 290 337 337 63 180 180 80 280 310 410 410 90 225 225 100 300 350 455 505 110 280 360 125/100 325 400 455 505 110 280 360 150 350 450 655 685 165 360 450 50 21,5 21,5 19,0 19,0 23,5 26,5 15,0 15,5 258,0 65/50 24,0 24,0 21,0 21,0 26,0 30,5 15,5 16,0 258,0 80 40,0 40,0 35,0 35,0 40,5 45,0 28,0 31,0 628,0 100 57,0 61,5 50,0 54,0 63,0 71,0 43,0 47,0 991,0 125/100 61,5 67,0 53,5 59,0 74,0 89,0 45,0 49,0 991,0 150 114,0 120,0 92,0 98,0 138,0 155,0 80,0 100,0 2323,0 700 GA DN H1 700 GA Flange Flange BW DN PN 10-25 PN 40 PN 10-40 50 280 65/50 280 80 345 100 405 125/100 405 150 525 50 19,0 19,0 15,0 65/50 21,0 21,0 28,0 80 35,0 35,0 28,0 100 50,0 54,0 43,0 125/100 53,0 59,0 45,0 150 92,0 98,0 80,0 Technical alterations reserved 6100.1.09.06 43
Gate valves Gate valve 700 HJ/JJ (GA) PN 10-40 DN 200-250 Material PN -60-10 20 100 150 200 250 300 350 400 450 10-16 16 16 16 15 14 13 11 10 8 6 1.0460 25 25 25 25 24 22 20 17 16 13 10 40 40 40 40 38 35 32 28 24 21 10 10-16 16 16 16 16 15 14 13 11 1.0566 2) 25 25 25 25 25 24 22 20 17 40 40 40 40 40 38 35 32 28 1) Operating temperature = design temperature minus temperature surcharge acc. to DIN regulations. 2) At temperature > 50 C only applicable for short-time service. Range of application Admissible operating pressure [bar] at design temperature [ C] 1) 44 6100.1.09.06 Technical alterations reserved
Gate valves Gate valve 700 HJ/JJ (GA) PN 10-40 DN 200-250 Standard features Die-forged body and bonnet Split wedge = Type 700 JJ Flexible wedge = Type 700 HJ Full bore Outside screw and yoke Yoke sleeve Optional standard features GA Split wedge / Flexible wedge Inside screw Non-rising turning stem Materials 1.0460 1.0566 Further materials on request Fields of application Chemical industries, power plants, ship building and other Pressure and temperature ratings Pressure rating up to 40 bar Temperature rating up to +450 C Design Highlights Die-forged body and bonnet Hard faced seats (valve body and shut-off device). Hardness app. 35-37 HRC Non-rising stem with polished stem shaft and a surface roughness of max. 2 μm Bolted bonnet with reduced shaft bolts Benefits Free from porosity and shrink holes Extremely resistant to wear Minimum wear to the gland packing compared with ground stem surfaces To improve the stress capability when temperature and pressure fluctuate Technical alterations reserved 6100.1.09.06 45
Gate valves Gate valve 700 HJ/JJ (GA) PN 10-40 DN 200-250 611 613 600 605 530 532 590 510 511 464 461 440 451 420 201 Stroke 180 160 190 400 362 360 100 361 700 JJ 700 HJ 350 46 6100.1.09.06 Technical alterations reserved
Gate valves Gate valve 700 HJ/JJ (GA) PN 10-40 DN 200-250 Materials Pos. Component 1.0460 (21) 1.0566 (25) 100 Body 1.0460 3) 1.0566 3) 160 Gasket Grooved with Grooved with graphite layer graphite layer 180 Stud 1.1181 A4-70 190 Hexagonal nut 1.1181 A4-70 201 Bonnet 1.0460 1.0566 350 Wedge 1.0460 4) 1.0566 4) 360/361 Disc 1.8507 4) 1.0566 4) 362 Ball WLSt WLSt 400 Stem 1.4021 5) 1.4571 420 Packing Graphite Graphite 440 Gland flange 1.0460 1.4571 451 Grooved pin St 1.4571 461 Eye bolt 1.1181 A4-50 464 Hexagonal nut 1.1181 A4-70 510 Yoke sleeve 1.0718 1.0718 511 Needle bearing WLSt DN 250 WLSt DN 250 530 Yoke nut 1.0718 1.0718 532 Screw pin 45H 45H 590 Grease nipple 5.8 5.8 600 Handwheel 0.7040 0.7040 605 Key 1.0060 1.0060 611 Hexagonal pipe nut St St 613 Screw pin 45H 45H Spare parts 3) Welded on with 18/8 (40) 4) Welded on with Cr17 5) PN 40 DN 250 = 1.4122 Further materials on request. Attention: Ki-Gate-Valve 700 GA only in material 1.0460. Maße/mm PN PN PN PN 10-25 40 10-25 40 DN L L H Stroke D D 200 400 550 810 220 360 450 250 450 650 975 285 450 450 Weights/kg and Kvs-values Flange Flange BW BW Kvs DN PN 10-25 PN 40 PN 10-25 PN 40 (m3/h) 200 151,5 185 140 140 4000 250 285,0 325 245 280 6247 700 GA DN H1 700 GA DN 200 590 250 725 200 138,5 170 125 125 4000 250 263,0 303 223 258 6247 Technical alterations reserved 6100.1.09.06 47
Gate valves Gate valve 700 HJ/JJ PN 63-100 DN 200-300 Admissible operating pressure [bar] at design temperature [ C] 1) Material PN -60-10 20 100 150 200 250 300 350 400 450 475 480 500 510 520 530 540 550 560 570 580 590 600 1.0460 63 63 63 63 58 50 45 40 36 32 21 14,0 12 100 100 100 100 91 80 70 60 56 50 34 21,8 19 1.0566 2) 63 63 63 63 63 58 50 45 40 100 100 100 100 100 91 80 70 60 1.5415 63 63 63 63 63 63 63 56 50 47 45 37,0 35 29 22 16 14 100 100 100 100 100 100 100 87 78 74 70 57,0 54 45 34 27 22 1.7335 63 63 63 63 63 63 63 63 61 58 56 53,0 51 47 40 32 25 20 16 13 10 100 100 100 100 100 100 100 100 95 91 87 82,0 80 74 62 49 38 31 24 19 16 1.7380 63 63 63 63 63 63 63 63 62 62 60 55,0 53 47 40 35 28 25 22 18 15 12 11 9 100 100 100 100 100 100 100 100 98 96 94 85,0 82 74 62 53 43 39 33 27 23 19 17 15 1) Operating temperature = design temperature minus temperature surcharge acc. to DIN regulations. 2) At temperature > 50 C only applicable for short-time service. Range of application 48 6100.1.09.06 Technical alterations reserved
Gate valves Gate valve 700 HJ/JJ PN 63-100 DN 200-300 Standard features Die-forged body and bonnet Split wedge = Type 700 JJ Flexible wedge = Type 700 HJ > DN 350 = Type 400 JJ (without picture) Full bore Outside screw and yoke Yoke sleeve Fields of application Chemical industries, power plants, ship building and other Pressure and temperature ratings Pressure rating up to 100 bar Temperature rating up to +600 C Materials 1.0460 1.0566 1.5415 1.7335 1.7380 Further materials on request Design Highlights Die-forged body and bonnet Hard faced seats (valve body and shut-off device) Non-rising stem with polished stem shaft and a surface roughness of max. 2 μm Bolted bonnet with reduced shaft bolts Benefits Free from porosity and shrink holes Extremely resistant to wear Minimum wear to the gland packing compared with ground stem surfaces To improve the stress capability when temperature and pressure fluctuate Technical alterations reserved 6100.1.09.06 49
Gate valves Gate valve 700 HJ/JJ PN 63-100 DN 200-300 613 611 600 605 530 532 590 510 511 464 440 461 451 420 412 410 190 180 201 160 400 365 360 361 362 140 100 Stroke 700 JJ 700 HJ 350 50 6100.1.09.06 Technical alterations reserved
Gate valves Gate valve 700 HJ/JJ PN 63-100 DN 200-300 Materials Pos. Component 1.0460 (21) 1.0566 (25) 1.5415 (42) 1.7335 (44) 1.7380 (45) 100 Body 1.0460 1.0566 1.5415 1.7335 1.7380 140 Seat ring 1.0460 3) 1.0566 3) 1.5415 3) 1.7335 5) 1.7380 5) 160 Gasket Grooved with Grooved with Grooved with Grooved with Grooved with graphite layer graphite layer graphite layer graphite layer graphite layer 180 Stud 1.7709 A4-701 7) 1.7709 1.7709 1.7709 190 Hexagonal nut 1.7258 A4-70 1.7258 1.7258 1.7258 201 Bonnet 1.0460 1.0566 1.5415 1.7335 1.7380 350 Wedge 1.0460 4) 1.0566 4) 1.5415 1.7335 5) 1.7380 5) 360/361 Disc 1.8507 8) 1.0566 4) 1.5415 1.8507 1)5) 1.8507 5) 362 Ball WLSt 2) WLS t 2) WLSt 2) WLSt 2) WLSt 2) 365 Double disc guide 1.0460 1.0566 1.5415 1.7335 1.7380 400 Stem 1.4021 1.4571 1.4122 1.4122 1.4122 410 Back seat bushing 1.4006 1.4006 1.4006 1.4006 1.4006 412 Basic ring 1.0718 1.0718 1.0718 1.0718 1.0718 420 Packing Graphite Graphite Graphite Graphite Graphite 440 Gland flange 1.0460 1.4571 1.0460 1.0460 1.0460 451 Grooved pin St 12) 1.4571 St 12) St 12) St 12) 461 Eye bolt 1.1181 11) A4-50 1.1181 11) 1.1181 11) 1.1181 11) 464 Hexagonal nut 1.1181 16) A4-70 1.1181 16) 1.1181 16) 1.1181 16) 510 Yoke sleeve 1.0718 14) 1.0718 1.0718 14) 1.0718 14) 1.0718 14) 511 Roller bearing WLSt 13) WLSt 13) WLSt 13) WLSt 13) WLSt 13) 530 Yoke nut 1.0718 1.0718 1.0718 1.0718 1.0718 531 Screwing 1.7335 DN 250 1.7335 DN 250 1.7335 DN 250 1.7335 DN 250 1.7335 DN 250 532 Screw pin 45H 45H 45H 45H 45H 590 Grease nipple 5.8 5.8 5.8 5.8 5.8 600 Handwheel St St St St St 605 Key 1.0060 1.0060 1.0060 1.0060 1.0060 611 Handwheel nut St St St St St 613 Screw pin 45H 45H 45H 45H 45H Spare parts 1) DN 250 = 1.7380 welded on with Stellite 2) DN 250 = Pressure ring 1.4122 3) Welded on with 18/8 (40) 4) Welded on with Cr17 5) Welded on with Stellite 8) DN 250 = 1.0460 welded on with Cr17 11) DN 250 = 1.7709 12) DN 250 = 1.7258 13) DN 250 = Thrust ball bearing 14) DN 250 = 2.0550 16) DN 250 = 1.7258 17) DN 300 = 1.5680 Dimensions/mm Flange BW PN 63-100 PN 63-100 DN L L H Stroke D 200 550 550 920 210 600 250 650 650 1110 265 720 300 750 750 1310 313 900 Weights/kg and Kvs-values Flange Flange BW PN PN PN Kvs DN 63 100 63-100 (m3/h) 200 270 285 215 4000 250 480 538 430 6247 300 690 750 560 8997 Technical alterations reserved 6100.1.09.06 51