E Hydraulic Excavator Introduction Since its introduction in the 990s, the 00 Series family of excavators has become the industry standard in general, quarry, and heavy construction applications. The all-new E Series and the E will continue that trend-setting standard. The E meets today s European Union emission standards. It is also built with several new fuel-saving and comfortenabling features and benefits that will delight owners and operators. If you are looking for more productivity and comfort less fuel consumption and emissions, and easier and more sensible serviceability, you will find it in the all-new E and the E Series family of excavators.
Engine Service Refill Capacities Engine Model Cat C. ACERT Fuel Tank Capacity 90 L Engine Rated Power ISO 9 89 kw Cooling System L Engine Rated Power ISO 9 (metric) hp Engine Oil (with filter). L Engine Rated Power ISO 9 (imperial) 9 hp Swing Drive (each). L Bore 0 mm Final Drive (each) L Stroke mm Hydraulic System (including tank) 90 L Displacement. L Hydraulic Tank 0 L Weights Track Operating Weight Hydraulic System Main System Maximum Flow (Total) Swing System Maximum Flow Maximum Pressure Equipment Maximum Pressure Travel Maximum Pressure Swing Pilot System Maximum Flow Pilot System Maximum Pressure Boom Cylinder Bore Boom Cylinder Stroke Stick Cylinder Bore Stick Cylinder Stroke Bucket Cylinder Bore Bucket Cylinder Stroke Drive Maximum Travel Speed Maximum Drawbar Pull Swing Mechanism Swing Speed Swing Torque 00 kg 00 L/min 0 L/min 000 kpa 000 kpa 00 kpa.8 L/min 0 kpa 0 mm 9 mm 0 mm mm 0 mm 09 mm. km/h. kn 9. rpm. kn m Number of Shoes (each side) Number of Track Rollers (each side) Number of Carrier Rollers (each side) Sound Performance pieces pieces pieces ISO 9 Operator Sound db(a) ISO 9 Spectator Sound 0 db(a) Operator Sound The operator sound level is measured according to the procedures specified in ISO 9:998, for cab offered by Caterpillar, when properly installed and maintained and tested with doors and windows closed. Exterior Sound The labeled spectator sound power level is measured according to the test procedures and conditions specified in 00//EC. Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained for doors/ windows open) for extended periods or in a noisy environment. Standards Brakes ISO 0 008 ROPS Cab ISO - Cab/OPG ISO 0 998
Dimensions All dimensions are approximate. 9 Reach Boom VA Boom. m Stick R. R. R. R. mm mm mm mm Shipping Height without Guard Rail* 80 80 80 80 Shipping Height with Guard Rail 80 80 80 80 Shipping Height with Top Guard, without Guard Rail 80 80 80 80 Shipping Length 80 80 80 80 Tail Swing Radius 00 00 00 00 Length to Center of Rollers 0 0 0 0 Track Length 90 90 90 90 Ground Clearance 0 0 0 0 Track Gauge 990 990 990 990 8 Transport Width 00 mm Shoes 0 0 0 0 00 mm Shoes 90 90 90 90 00 mm Shoes 90 90 90 90 9 Cab Height 890 890 890 890 Cab Height with Top Guard 00 00 00 00 0 Counterweight Clearance** 00 00 00 00 *Including shoe lug height. **Without shoe lug height. 8 0
Working Ranges All dimensions are approximate. Meters 0 9 8 Meters 0 9 8 0 R. R. 0 R. R. 0 9 8 0 - Meters 0 9 8 0 - - - Meters Reach Boom VA Boom. m Stick R. R. R. R. mm mm mm mm Maximum Digging Depth 090 0 0 0 Maximum Reach at Ground Level 880 80 890 80 Maximum Cutting Height 890 80 0 0 0 0 Maximum Loading Height 80 0 80 0 Minimum Loading Height 00 0 90 90 Maximum Depth Cut for 0 mm Level Bottom 80 00 90 00 Maximum Vertical Wall Digging Depth 90 90 80 00
Operating Weight and Ground Pressure 00 mm 00 mm 00 mm Triple Grouser Shoes Triple Grouser Shoes Triple Grouser Shoes kg kpa kg kpa kg kpa Reach Boom. m R. 00 00 00 9 R. 00 00 00 9 VA Boom R. 8 00 8 8 00 8 00 R. 8 0 8 8 00 8 00 All weights are rounded up to nearest 00 kg including General Duty 0. m bucket (0 kg). VA Boom weights include AUX lines. Major Component Weights kg Base Machine (with boom cylinder, without counterweight, front linkage and track) 0 Long Undercarriage 0 Counterweight.8 mt 800 Boom (includes lines, pins and stick cylinder) Reach Boom. m 0 VA Boom 80 Stick (includes lines, pins, bucket cylinder, and bucket linkage) R. 80 R. 80 Track Shoe (Long/per two tracks) 00 mm Triple Grouser 90 00 mm Triple Grouser 0 00 mm Triple Grouser 0 All weights are rounded up to nearest 0 kg except for buckets. Kg was rounded up separately so some of the kg do not match. Base machine includes kg operator weight, 90% fuel weight, and undercarriage with center guard.
Bucket and Stick Forces Reach Boom VA Boom. m Stick R. R. R. R. kn kn kn kn General Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) 80 88 80 88 Severe Duty Bucket Digging Force (ISO) Stick Digging Force (ISO) 80 88 80 88 CW-0 General Duty Bucket Digging Force (ISO) 0 0 Stick Digging Force (ISO) 8 8 8 8 Heavy Duty Bucket Digging Force (ISO) 0 0 Stick Digging Force (ISO) 8 8 CW-0S General Duty Bucket Digging Force (ISO) 00 00 Stick Digging Force (ISO) 8 8 Heavy Duty Bucket Digging Force (ISO) 0 0 Stick Digging Force (ISO) 8 8
Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom. m Counterweight.8 mt Bucket None Stick R. Shoes 00 mm triple grouser with step. m.0 m. m.0 m. m m. m kg *0 *0..0 m kg *00 00 *80 *80.8. m kg *00 *00 *00 0 *0 00.0.0 m kg *880 *880 *900 900 *800 00 *800 00.. m kg *00 0 000 00 *00 0 *000 00. Ground Line kg *0 *0 00 0 900 90 *00 0.. m kg *0 *0 *0 0 80 0 00 800 900 00 0.8.0 m kg *990 *990 *0 0 8000 *0 0 000 00.89. m kg *0 *0 *00 90. Boom. m Counterweight.8 mt Bucket None Stick R. Shoes 00 mm triple grouser with step. m.0 m. m.0 m. m. m kg *90 *90..0 m kg *00 *00.9. m kg *000 *000 *00 00 *0 800..0 m kg *0 80 *00 00 *0 0.. m kg *0 00 000 00 *0 0. Ground Line kg *00 *00 00 0 900 90 900 00.0. m kg *00 *00 *0 800 900 0 00 80 90 0 0.9.0 m kg *0 0 800 *0 00 *0 00.8 * Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 0:00. They do not exceed 8% of hydraulic lifting capacity or % of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m
Reach Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom. m Counterweight.8 mt Bucket None Stick R. Shoes 00 mm triple grouser. m.0 m. m.0 m. m m. m kg *0 *0..0 m kg *00 00 *80 *80.8. m kg *00 *00 *00 00 *0 0.0.0 m kg *880 80 *900 800 *800 0 *800 0.. m kg *00 0 900 000 *00 0 *000 0. Ground Line kg *0 *0 00 0 0 900 *00 00.. m kg *0 *0 *0 0 0 0 0 00 80 900 00.8.0 m kg *990 *990 *0 0 800 00 00 900 90.89. m kg *0 *0 *00 80. Boom. m Counterweight.8 mt Bucket None Stick R. Shoes 00 mm triple grouser. m.0 m. m.0 m. m. m kg *90 *90..0 m kg *00 *00.9. m kg *000 *000 *00 0 *0 0..0 m kg *0 00 000 00 *0 00.. m kg *0 00 80 000 *0 00. Ground Line kg *00 *00 00 0 0 900 800 0.0. m kg *00 *00 *0 800 00 0 00 00 80 0 00.9.0 m kg *0 0 80 *0 0 0 00.8 * Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 0:00. They do not exceed 8% of hydraulic lifting capacity or % of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m 8
Variable Angle Boom Lift Capacities Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side Boom. m (Stub),. m (Fore) Counterweight.8 mt Bucket None Stick R. Shoes 00 mm triple grouser. m.0 m. m.0 m. m m 9.0 m kg *00 *00.. m kg *0 *0 *0 *0 *0 *0.0.0 m kg *800 *800 *90 *90 *000 *000 *000 900.. m kg *90 *90 *0 *0 *000 *000 *900 0..0 m kg * 0 * 0 *00 *00 *00 00 *0 00 *90 0 *900 00.. m kg *800 *800 *00 00 *800 900 *0 00 *00 90. Ground Line kg *0 *0 *0 *0 0 00 *00 0 *00 00 *00 000.. m kg *00 *00 *900 00 0 000 0 00 0 00.0.0 m kg * 00 * 00 *900 00 *00 00 *0 80.89 Boom. m (Stub),. m (Fore) Counterweight.8 mt Bucket None Stick R. Shoes 00 mm triple grouser. m.0 m. m.0 m. m. m kg *900 *900 *00 *00 *00 *00..0 m kg *00 *00 *0 *0 *0 00 *00 00.00. m kg *00 *00 *0 *0 *0 00 *0 0.8.0 m kg *00 *00 *80 0 *00 00 *0 00.0. m kg *0 *0 0 0 *00 80 *00 00. Ground Line kg *00 *00 *80 *80 0 00 00 0 0 0.. m kg *900 *900 *890 00 00 00 00 0 00 00.8.0 m kg * 00 * 00 *900 00 *800 0 *80 0.0 * Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 0:00. They do not exceed 8% of hydraulic lifting capacity or % of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance. Always refer to the appropriate Operation and Maintenance Manual for specific product information. m 9
E Hydraulic Excavator Standard Equipment Work Tool Offering Guide* Boom Type Reach Boom VA Boom Stick Size R. R. R. R. Hydraulic Hammer H0Es H0Es H0Es H0Es HEs HEs HEs HEs H0Es H0Es H0Es*** H0Es*** Multi-Processor MP*** Crusher P P Pulverizer P P Demolition and Sorting Grapple G0B G0B G0B G0B GB*** Mobile Scrap and Demolition Shear SB** SB** Compactor (Vibratory Plate) CVP CVP CVP CVP Orange Peel Grapples Rippers Center-Lock Pin Grabber Coupler Dedicated Quick Coupler These work tools are available for the E. Consult your Cat dealer for proper match. *Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match. **Boom mount. ***Pin-on only. 0
E Hydraulic Excavator Standard Equipment Standard Equipment Standard equipment may vary. Consult your Cat dealer for details. ENGINE C. diesel engine Biodiesel capable Meets European Union Stage IIIB emission standards 00 m altitude capability Electric priming pump Automatic engine speed control Economy and high power modes Two-speed travel Side-by-side cooling system (tilt-up ATAAC, swing-out A/C condenser) Radial seal air filter Primary filter with water separator and water separator indicator Starting kit, 8 C Screen fuel filter Secondary fuel filter HYDRAULIC SYSTEM Regeneration circuit for boom and stick Reverse swing dampening valve Automatic swing parking brake High-performance hydraulic return filter Capability of installing HP stackable valve and medium and QC valve Capability of installing additional auxiliary pump and circuit Capability of installing boom lowering control device and stick lowering check valve Capability of installing Cat Bio hydraulic oil UNDERCARRIAGE Grease Lubricated Track GLT, resin seal Towing eye on base frame COUNTERWEIGHT.8 mt ELECTRICAL 80 amp alternator Circuit breaker Capability to electrically connect a beacon LIGHTS Boom light with time delay Exterior lights integrated into storage box SECURITY Cat one key security system Door locks Cap locks on fuel and hydraulic tanks Lockable external tool/storage box Signaling/warning horn Secondary engine shutoff switch Openable skylight for emergency exit Rearview camera CAB Pressurized operator station with positive filtration Mirror package Sliding upper door window (left-hand cab door) Glass-breaking safety hammer Removable lower windshield with in cab storage bracket Coat hook Beverage holder Literature holder Two stereo speakers Storage shelf suitable for lunch or toolbox Color LCD display with warning, filter/fluid change, and working hour information Adjustable armrest Height adjustable joystick consoles Neutral lever (lock out) for all controls Travel control pedals with removable hand levers Capability of installing two additional pedals Two power outlets, 0 amp (total) Laminated glass front upper window and tempered other windows Sunscreen
E Hydraulic Excavator Optional Equipment Optional equipment may vary. Consult your Cat dealer for details. ENGINE Electric refueling pump with auto shut off Starting kit, cold weather, C HYDRAULIC SYSTEM Quick drains, engine and hydraulic oil (QuickEvac ) Auxiliary hydraulics Boom and stick lines High-pressure line Medium-pressure line Cat quick coupler line high- and medium-pressure capable One-way circuit Common circuit CAB Seat, high-back air suspension with heater Seat, high-back mechanical suspension Air pre-filter Travel alarm Left foot switch Straight travel pedal Windshield wiper, lower with washer FRONT LINKAGE Quick coupler Bucket linkage, with lifting eye. m reach boom Variable Angle boom. m heavy duty stick. m heavy duty stick LIGHTS Working lights, cab mounted with time delay HID lights, cab mounted with time delay SECURITY Operator Protective Guards (OPG), bolt-on TECHNOLOGY Product Link Cat Grade Control UNDERCARRIAGE 00 mm triple grouser shoes 00 mm triple grouser shoes 00 mm triple grouser shoes Guard, full length for long undercarriage Center track guiding guard Segmented ( piece) track guiding guard Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com. 0 Caterpillar Inc. All Rights Reserved. AEHQ April 0 CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, Caterpillar Yellow and the Power Edge trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission. Product ID: E