Description To Be Used With: Dimensions Cat. No. GD2 standard actuator Trojan GD2 Models Only G-A27011

Similar documents
Specifications. Safety Ratings. Standards. Safety Classification. Certifications. Power Supply

3-36. General 1-2-Opto-electronics 3-Interlock. Switches. Operator. Interface. Logic Power. Safety Switches Guard Locking Switches 440G-MT

Specifications. Safety Ratings. Standards. Safety Classification. Certifications. Safety Contacts. Locking Type. Power Supply. Operating Radius, Min

Operator Interface 4-1. General. Safety Switches. 4-Table of. Contents. Logic. Power. Operator Interface Table of Contents. 2-Opto-electronics

Operator Interface 4-1. General. Safety Switches. 4-Table of. Contents. Logic. Power. Operator Interface Table of Contents. 2-Opto-electronics

Safety Door Switches. Contents. Selection Guide F-2. Tongue Switches D4NS F-6 T5009 & T F-14 T4012 F-20 T4016 F-20 T2008 F-21 D4GS-N F-26

Dimensions (Pneumatic) mm.

97100 Inline 3/2, 5/2 & 5/3 spool valves electromagnetic actuated, indirectly controlled G 1/4, 1/4 NPT

Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:

Cordsets And Patchcords

CrossOver X45 Lock Installation Need another copy of these installation sheets? You can download one at

Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:

Series VP4 50/4 70. Large Size 5 Port Solenoid Valve Rubber Seal SJ SY SY SV SYJ SZ VF VP4 S0700 VQ VQ4 VQ5 VQC VQC4 VQZ SQ VFS VFR VQ7 VP4

HYDRUS INSTALLATION INSTRUCTION P/N: 3801-EOP AUTO REVERSE / AUTO STOP OPTION KIT FOR HYDRUS 2000 MAIN PANEL

Heavy Duty. this page Page 4-16 Page 4-19 Page Mounting Clamp. 8 ArmorBlock MaXum. 9 Standard Cordsets. 10 DeviceNet Photoelectric

Technical Service Bulletin

Quarter-turn locks, compression latches

Zertifikat Nr. Certificate No.

flowserve.com Flowserve Solenoid Valves Namur, Remote and Banjo Mounted Designs for Precision Control

Series VP3145/3165/3185

INSTALLATION INSTRUCTIONS

Pneumatic control unit for decentralized automation of ELEMENT process valves

Material pressure (bar) (Cv (US) kv x 1,2 Seat

SECTION CONTENTS MODEL NO. U U PAGE NO. U THRU 27-9 U THRU 27-9

W1000/W3000/W4000/W8000 Series

HS1C Series Full Size Interlock Switch with Locking Solenoid. GS-ET-15 BG standard in Germany. HS1C Series Functionality

HERION SERIES Indirect solenoid actuated soft seal

IDEM Solenoid Interlock Safety Switches

PD18-RIM INSTALLATION INSTRUCTIONS

5 Port, 2 Position Double Solenoid Inline Valve (Series 524)

RETROFIT INSTALLATION

HS1B Series Full Size Interlock Switch. GS-ET-15 BG standard in Germany. Part Number Key

HS1E Series Full Size Interlock Switch with Locking Solenoid

INSTALLATION INSTRUCTIONS

97105 Inline. Ordering information. Technical data. Accessories See page 5

INSTALLATION INSTRUCTIONS

PURESTREAM SYSTEM - ASSEMBLY GUIDE

HS1B R - R. Door Interlock Switches. HS1B Series. HS1B Series Full Size Interlock Switch. Part Number. HS1B features: Part Number Key.

127 (5) Approx (1.85) Overmold. Male Coupling Nut. Straight Micro Female 63.5 (2.5) 127 (5) Approx. Overmold Coupling Nut Straight Mini Female

SKORPION Trapped Key Interlocking with Key Exchange THE SKORPION RANGE - AVAILABLE IN STAINLESS STEEL 316 OR DIE CAST:

DVS / 31 DVI Shadowbox Face Installation Instructions (sku black: bronze: )

HS2B N B - R. Door Interlock Switches. HS2B Series. Full Size Interlock Switch. Part Number. HS2B features: Part Number Key.

Model No EXPLORER POLY ATV CART. CAUTION: Read Rules for Safe Operation and Instructions Carefully

HS6B Series Sub-Miniature Interlock Switch. Direct Opening

3 Port Solenoid Valve Direct Operated Poppet Type 02 1 G VT325. For manifold: Enter VO. Valve option. Nil Standard V For vacuum Option.

HS6B Series Subminiature Interlock Switch

97100 NAMUR. Technical data

6-54 HEPA Filter Assembly

LVQ. Viper rated to 200 C. Diaphragm support bushing prevents micro-cracking, extending life up to five times our competitors

Material pressure (bar) (Cv (US) kv x 1,2 Seat. N/en

Heavy Duty Bench Top Presses

Acoustic Signals Industrial Airhorns > AP Series Product overview

AIR CLEANERS. Model MX 1800 OWNER S MANUAL CAUTION. Read complete instructions before operating. Please file for future reference.

RYOBI MITER SAW MODEL NUMBER TS1353DXL

Q15P. Mitsubishi MQ Triton Dual Cab

Brakes. FREE BACKING # Right # Left. UNI-SERVO # Right # Left. Page 1. 1/15 BC20011, Rev 6

Master/Slave Actuators Spring Return Rotary 24 Vac - Modulating Control

HS1E Series Full Size Solenoid Locking Switches

3 Port Solenoid Valve Direct Operated Poppet Type. Body type. T Body ported O Manifold. Valve option

Our policy is one of continued research and development. We therefore reserve the right

FACTORY AIR CONVERSION HEAT/ COOL/ DEFROST CHEVROLET CHEVELLE

INSTALLATION INSTRUCTIONS

Cut out PRODUCT CODE HANDLE BODY FINISH MATERIAL MODUL. 5 mm Double bit 8 mm Square 9 mm Triangular Button. Stainless steel dust cap (Keyed alike) 03

Series SYA3000/5000/7000


C A B E. Part No Description Item

DISASSEMBLY AND ASSEMBLY

VELAR HITCH INSTALLATION INSTRUCTIONS TOW RANGE ROVER MODEL/ TRIM YEARS: WEIGHT CAPACITY to Present PARTS & SUPPLIES: TOOLS REQUIRES:

ED SERIES SAFETY LIMIT SWITCH

Nugget 40, V08 series

25% reduction in volume * PB1013A/Air-operated type without foot

Operating Levers For use with 802T, 802M, 802MC, 802X, 802XR

H15P. Toyota Hilux A-DECK Dual Cab

Micro push button 145MT... for multi-functional use. Use. Types. + long service life due to magnetic actuation principle

MODEL MA4210 Installation and Operation Manual Important:

INSTALLATION INSTRUCTIONS

CONTAINER GUIDE WELDMENTS

491 Harness Installation Kit

(2) #10 Washers (1) ¼ Washers (6) 5/16 Washers (2) Locknuts (2) 5/16 Locknuts

Illustrated Parts List I HDC 1000 ( ) Repair Parts Manual

Door Interlock Switches

HYDRAULIC HEAVY DUTY

Chapter 11: Valves and Actuators with the NAMUR-interface

Easy Mounting and Wiring

26220, 26230, For single- and double-acting drives. Standard manual override with detent. Compact design. Exhaust air silencers.

VW New Beetle Convertible. Top Hydraulics Removal Instructions

Door Interlock Switches

Series SYA3000/5000/7000

INSTALLATION INSTRUCTIONS

PD10-UL-M KIT. I N S E R T I n s t r u c t i o n s A. B. C. D. E. E. E.

Series 70 24V On/Off Electric Actuator Operation and Maintenance Manual

For double-acting actuators. Crossover-free switching. Safety function in the event of power failure provided by mechanical return spring

DVL / 33 DVI Shadowbox Face Installation Instructions (SKUs Black: ; Bronze: )

2.0L, 2.4L ENGINES 2.7L ENGINE. Subject to alteration without notice K Expert Fitment Required. 1 of 5

INSTALLATION GUIDE. RMS500, RMS501, RMS502, RMS503, RMS506, RMS507, RMS508, RMS509, -OR Manual Revision:

Manual override. Non-locking push type (Tool required) Nil: B: Locking type (Tool required) C: Locking type (Manual) Electrical entry

Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE

SmartX MF and MS

Your Global Flow Control Partner. Series 70 24V On/Off Electric Actuator Operation and Maintenance Manual

ENGINEERED FOR EXCEPTIONAL PERFORMANCE.

Transcription:

R Safety Tongue Trojan T15 Description To Be Used With: Dimensions Cat. No. Standard actuator Trojan T15 Standard Models Only 3-51 440K-A11238 GD2 standard actuator Trojan GD2 Models Only 3-50 440G-A27011 GD2 flat actuator Trojan GD2 Models Only 440K-A11112 3-51 Alignment guide with semi-flexible actuator Discard Alignment Guide for GD2 Models 440K-A11144 Alignment guide with fully-flexible actuator Discard Alignment Guide for GD2 Models 3-52 440K-A27010 Sliding bolt actuator Trojan GD2 Models Only 3-55 440G-A27163 Catch and Retainer Kit Trojan T15 Standard Models Only 3-50 440K-A11094 Replacement Cover All Models 440A-A11499 Dust Cover All Models 440K-A17180 Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. Note: 2D, 3D and electrical drawings are available on www.ab.com. 32 (1.26) 15 (0.59) 2 x M5 5 (0.2) (0.81) 13 (0.51) 31 (1.22) 40 (1.57) 5.5 (0.22) 3 x M20 GD2 16 (0.62) 33.4 (1.31) 41 (1.61) 75 (2.95) 52 (2.05) 5 (0.2) 5.5 (0.22) (0.81) 15.75 (0.62) 3-20 Visit our website: www.ab.com/catalog

R Safety Tongue Trojan 5 & 6 Description To Be Used With: Dimensions Cat. No. Standard actuator Trojan T5 and T6 Standard Models Only 3-51 440K-A11095 GD2 standard actuator GD2 Models Only 3-50 440G-A27011 GD2 flat actuator GD2 Models Only 3-51 440K-A11112 Alignment guide with semi-flexible actuator Discard Alignment Guide for GD2 Models 3-51 440K-A11144 Alignment guide with fully-flexible actuator Discard Alignment Guide for GD2 Models 3-52 440K-A27010 Sliding bolt actuator GD2 Models Only 3-55 440G-A27163 Catch and Retainer Kit Trojan T5 and T6 Standard Models Only 3-50 440K-A11094 Replacement Cover Trojan T5 Standard Models Only Trojan T5 GD2 Trojan T6 Standard Models Only Trojan T6 GD2 440A-A11495 440A-A11496 440A-A11497 440A-A11498 Dust Cover All Models 440K-A17180 3-25

R Safety Tongue MT-GD2 Description Dimensions Cat. No. GD2 standard actuator 3-50 440G-A27011 GD2 flat actuator 3-51 440K-A11112 Fully flex actuator 3-50 440G-A27143 Sliding bolt actuator 3-55 440G-A27163 Extended flat actuator 3-51 440K-A17116 Dust Cover 440K-A17180 Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. MT-GD2 Latch Release 4 x M5 MT-GD2 11.5 (0.45) 60 (2.36) 5 (0.2) 8.75 (0.34) 40 (1.57) 30 (1.18) 119 (4.68) 118.5 (4.66) 22 (0.86) 40 (1.57) 30 (1.18) (0.81) 38 (1.5) 10.5 (0.41) 60 (2.36) 102.4 (4.03) 24.6 (0.97) 10.5 (0.41) 43 (1.69) 116.5 (4.59) 30.8 (1.21) 40.7 (1.6) 30.8 (1.21) 9.2 (0.36) 5 (0.2) 43 (1.69) 51 (2.0) 67.6 (2.66) 74.6 (2.93) 30.8 (1.21) 9.2 (0.36) 5 (0.2) 1 x M20, 1 x 1/2" NPT (0.81) 8.75 (0.34) 1 x M20, 1 x 1/2" NPT (0.81) 8.75 (0.34) Note: 2D, 3D and electrical drawings are available on www.ab.com. 3-31

Safety Guard Locking 440G-MT Connection Systems Description 8-Pin Micro 12-Pin M23 Cordset 889D-F8AB- 889M-F12AH- Patchcord Replace symbol with 2 (2 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 1 (1 m), 2 (2 m), 3 (3 m), 5 (5 m), or 10 (10 m) for standard cable lengths. Replace symbol with 0M3, (0.3 m), 0M6 (0.6 m), 1 (1 m), 2 (2 m) or 3 (3 m) for standard lengths. Note: For additional information, see page 7-1. Description Dimensions Cat. No. GD2 standard actuator GD2 flat actuator Fully flex actuator Sliding bolt actuator Extended flat actuator Replacement Cover, No LED, No Override Key Replacement Cover, LED, Override Key Emergency Override Key (See Warning below.) 3-50 889D-F8ABDM- 889M-F12AHMU- 440G-A27011 440K-A11112 440G-A27143 440G-A27163 440K-A17116 440G-MT47120 440G-MT47123 440G-A36026 Dust Cover 440K-A17180 WARNING: Do not attach the Emergency Override Key to the 440G-MT switch. Approximate Dimensions Dimensions are shown in mm (in.). Dimensions are not intended to be used for installation purposes. 4 x M5 145 (5.71) 5 (0.19) 40 (1.57) 30 (1.18) 38 (1.49) 15.5 (0.61) 199 (7.83) 23 (0.90) Note: 2D, 3D and electrical drawings are available on www.ab.com. 46 (1.81) 9.2 (0.36) 40.7 (1.60) 46.75 (1.84) 8.75 (.034) (0.80) 3-38 Visit our website: www.ab.com/catalog R

Safety Guard Locking TLS-GD2 Description Dimensions Cat. No. GD2 standard actuator 3-50 440G-A27011 GD2 flat actuator 3-51 440K-A11112 Extended flat actuator 3-51 440K-A17116 Fully flex actuator 3-50 440G-A27143 Sliding bolt actuator not to be used with the Escape Release 3-55 440G-A27163 Cover for TLS-1 with external override key for series D and earlier 440G-A27140 Cover for TLS-3 with external override key for series D and earlier 440G-A27142 Cover for TLS-1 with override key attached for series D and earlier 440G-A27207 Cover for TLS-3 with override key attached for series D and earlier 440G-A27208 Cover for TLS-1 with external override key for series E and later 440G-A27371 Cover for TLS-3 with external override key for series E and later 440G-A27372 Cover for TLS-1 with override key attached for series E and later 440G-A27373 Cover for TLS-3 with override key attached for series E and later 440G-A27374 Emergency Override Key (See Warning below.) Flexible Release 1 m (3.28 ft) Cable 440G-A36026 440G-A27356 Flexible Release 3 m (9.84 ft) Cable 3-54 440G-A27357 Dust Cover 440K-A17183 Sliding Bolt 3-55 440K-AMDS Mounting Plate 3-55 440K-AMDSSMPB WARNING: Do not attach the Emergency Override Key to the TLS-GD2 switch. R 3-43

Safety Tools and Door Handles Tools Item Description Cat. No. Security Bit 440A-A09015 Screwdriver Including Security Bit 440A-A09018 Door Handles Item Description Dimensions [mm (in.)] Cat. No. Ø10 20 (0.39) (0.78) 50 (1.96) 20 19 (0.74) 18 (0.7) Sliding bolt actuator 40 (1.57) 34 (1.33) 84 (3.3) 50 25.5 (1.0) 100 (3.93) 42 (1.65) 140 (5.51) 5.5 Tapped M5 (0.21) 65 (2.56) 2.5 (0.09) 117.5 (4.62) 55.4 (2.18) (0.8) 24 (0.94) 6.4 (0.25) Dia. 440G-A27163 Sliding Bolt Sliding Bolt Mounting Plate for TLS-GD2 52 13 (2.05) (0.51) 73 (2.87) 6 43 (0.24) (1.69) 125 (4.92) 3 (0.12) 17 (0.67) 52 (2.05) 8 (0.32) 34 (1.36) 23 (0.91) 7.35 (0.29) 120 (4.72) 19 (0.75) 43 (1.69) 65.95 (2.6) 105.3 (4.15) 38 (1.5) 18 (0.71) 54.4 (2.14) 60.5 (2.38) 130 (5.12) 8 (0.32) 440K-AMDS 440K-AMDSSMPB R 3-55