FROST S,, INCI NC. MAKE A TRANSITION WITH FROST S INKS,, INCI NC. 10 ft. Section GM Fairfax Chain Wear Data Smooth Link 28 25 22 19 16 13 10 7 4 1 0 0.5 1 1.5 2 2.5 3 3.5 4 Inches Chain Stretch (inches) 1000 900 800 700 600 500 400 300 200 100 0 Ford Motor Company Case Study Chain Wear results for 3,000 ft. of Chain Frost SL Micro-Tuff 1 11 21 31 41 51 61 71 81 91 101 111 Weeks of Operation
: : APPLICATIONS DUAL STRAND CONVEYORS JOB SPACING FIXED POSITION STOPS MULTIPLE DRIVES ON SYSTEM PENDULUM CONVEYORS TO ORDER OR FOR ADDITIONAL INFORMATION PLEASE CONTACT A MEMBER OF OUR SALES TEAM FROST S,, INCI NC. 2900 NORTHRIDGEN ORTHRIDGE,, N.W. GRAND RAPIDS,, MICHIGANM 49544 USA TEL: : 616.785.9030 OR FAX 616.785.9430 888.244.0920 EMAIL: SALES@FROSTS FROSTS.COM Rev B1 02.08.06
EACH 10 FT. SECTION OF MEASURES TO WITHIN.012 INCHES (0.3 MILLIMETERS). THE FROST PRICE FOR EXAMPLE: : : 72 MONTHSM : : $18.00/FT MONTH: ONTHS = $18.00/72 MONTHSM RICE = T $0.25 FOOT MONTH Comparison = THE RIGHT PRICE FOR EXAMPLE: FORGED SUCH AS MICROTUFF : : 32 MONTHSM : : $18.00/FT MONTH: ONTHS = $18.00/32 MONTHSM $0.57 FOOT MONTH THE CALCULATIONS ABOVE SHOW THAT THE FROST PRICE EQUALS THE LOWEST! 3000 feet of chain / 102 weeks of use Frost SL MT-15 Avg wear/week - 10' strand.0058.0235" Chain Stretch (inches) 1000 900 800 700 600 500 400 300 200 100 0 Ford Motor Company Case Study Chain Wear results for 3,000 ft. of Chain Frost SL Micro-Tuff 1 11 21 31 41 51 61 71 81 91 101 111 Weeks of Operation THE CASE STUDY A Ford Motor Company truck assembly plant in Kentucky collected data over a period of 102 weeks comparing the Frost SL 8640 chain to a forged pin chain such as Microtuff on the same paint line. THE DATA REPORTED SHOWS THAT OVER THE 102 WEEK IOD THE FROST IS FAR SUIOR THAN THE FORGED SUCH AS MICROTUFF!
E HAIN: BENEFITS All 10ft (3.05 m) strands are exactly the same length (Strands Vary only.012 inches (0.3 mm) per 10ft length) Substantially Lower Cost (72 month estimated life cycle) Retains Consistent Job Spacing on the Line (All chain pins wear at the same reduced wear rate) No Initial Maintenance Cost (Eliminates system break-in wear or stretch) Prevents Premature Chain Link Failure (Consistent in microstructure and hardness resulting from computer controlled heat treat) Quieter Running (Smooth running surfaces) Increases Conveyor Drive Life (Less friction lowers the amperage draw)
FORGED SUCH AS MICROTUFF: : DIFFICULTIES Forged pin chains cannot be assembled to precision tolerances (32 month estimated life cycle) Higher Monthly Cost (32 month estimated life cycle) Job Spacing Becomes Compromised (Chain pins wear at varying rates) Always Requires Maintenance Cost (Chain links always need to be removed) Untimely Chain Breaks (Irregularities in microstructure and hardness which result from different temperatures in the heat treat process) Noisy Running (Rough running surfaces) Reduced Conveyor Drive Life (Friction creates a higher amperage draw on the conveyor system)
L in k Sets 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 Smooth Link 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Inches FORGED SUCH AS MICROTUFF: AFTER A 15 MONTHM IOD YOU CAN SEE HOW MUCH VARIATION AND INCONSISTENCY THERE IS WITH THE FORGED SUCH AS MICROTUFF. THET MAX ALLOWABLE WEAR SET IS 0.4 INCHES WHICH THE FORGED SUCH AS MICROTUFF NEARLY EXCEEDS. PROVE MY POINT YET? Link Sets 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 : : AFTER A IOD OF 3 YEARSY EARS, THE C SHOWS THAT THE WEAR SET IS 0.1 INCHES AND IT IS CONSISTENT FROM TO. HAT... PROVING THAT ALL S WEAR AT THE SAME REDUCED RATE. Microtuff 0 0.05 0.1 0.15 0.2 0.25 0.3 0.35 0.4 Inches
CHECK WITH ANY E USER TO CONFIRM THAT THERE IS NO REMOVAL REQUIRED DURING THE NEW BREAK IN IOD. Microtuff Smooth Link CHECK WITH ANY E USER TO CONFIRM THAT E PREVENTS PREMATURE FAILURE. COMPUTERIZED HEAT TREAT,, CONSISTENTC MICROSTRUCTURE, AND 100% PROOFP LOADING IS WHAT MAKES THE DIFFERENCE! IF YOU WANT A CONVEYOR AT A LOWER, BE SURE TO PURCHASE QUALITY PRODUCTS FROM FROST S,, INCI NC.
FROST S,, INCI NC.. ALSOA OFFERS IN A VARIETY OF SIZES PART NUMBER & SIZE A NOMINAL B DIAMETER C OUTSIDE LENGTH D MAX CTR LENGTH WIDTH E HEAD WIDTH F MIN CTR WIDTH G MIN SIDE THICKNESS H MAX SIDE DISTANCE I MIN DIAMETER BEARING SURFACE 0543480 3 3.00 75 mm 0.50 12.70 mm 1.75 44.45 mm 0.75 19.05 mm 1.00 25.40 mm 0.50 12.70 mm 0.40 10.16 mm 0.790 20.07 mm 0.536 13.61 mm 0510458 4 4.00 100 mm 0.625 15.87 mm 2.25 56.39 mm 1.00 25.40 mm 1.25 31.75 mm 0.625 15.88 mm 0.475 12.07 mm 1.075 27.31 mm 0.690 17.53 mm 0546780 6 6.00 150 mm 0.875 22.22 mm 3.03 76.96 mm 1.28 32.51 mm 1.875 47.63 mm 0.827 21.00 mm 0.675 17.15 mm 1.375 34.93 mm 0.906 23.01 mm PART NUMBER & SIZE SPECIFICATION: MINIMUM STRENGTH TOLERANCE FOR 10.0FT STRAND (3.05M) MEASURING LOAD WEIGHT 10.0FT STRAND (3.05M) 0543480 3 SMX-348 34,500 lbs. 15,649 kg 120.10-121.85 3.0505m-3.0950m 100.00 lbs. 45.37 kg 21.00 lbs. 9.53 kg 0510458 4 0584580 4 SMX-458 SMX-458 (8640) 57,500 lbs. 26,082 kg 68,000 lbs. 30,852 kg 120.43-121.68 3.0589m-3.0907m 200.00 lbs. 90.9 kg 32.00 lbs. 14.51 kg 0546780 6 0586780 6 SMX-678 SMX-678 (8640) 110,000 lbs. 49,895 kg 125,000 lbs. 56,715 kg 120.37-121.37 3.0574m-3.0828m 300.00 lbs. 136.12 kg 65.00 lbs. 29.49 kg Frost Inc. Warranty Statement FROST INC., warrants to the original purchases only, each new product manufactured or supplied by FROST INC. to be free from defect of material and workmanship under normal use and service. FROST INC. obligation hereunder shall be limited to furnishing and replacement product for any product which shall, within 12 months after the date of purchase by the original purchaser, be returned by that purchaser to FROST INC. for examination, having first received FROST INC. written authorization therefore, and which examination shall disclose the product to have been defective. FROST INC. is not liable for incidental or consequential damages to such purchaser arising out of any such defect and makes no other warranty of fitness or merchantability expressed or implied. This warranty shall not apply to any FROST INC. product which has been subjected to negligent or careless handling or use after leaving FROST INC. custody and control, or which has been repaired, modified, or altered in any way so as, in FROST INC. judgment, to have adversely affected the product s performance and reliability, nor to any product which had been used for any purpose for which it has not been designed or intended. No one shall have authority to expand or modify the terms of this warranty without the express, written approval of an officer of FROST INC. Frost & the Frost logo are registered trademarks of Frost, Inc., and cannot be used without the express written permission of an officer of Frost, Inc. CLF015 Rev 8/01 Smooth Link is a registered trademark of Frost and Associates, Inc. Patent number 5,365,765 and 5,378,205. Copyrighted 2006 by Frost Links, Inc.