Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters).

Similar documents
OPTOFIT CATALOGUE. FITTINGS FOR METALFREE (ADSS CABLES) and METAL ARMOURED (OPGW & OPPW) AERIAL CABLES WITH INTEGRATED OPTICAL FIBRES.

S. K. Industrial Corporation

PART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10

Annexure B (1)- Engineering Instructions for Installation of Aerial OFC

MATERIAL FOR FIBRE OPTIC LINES. General C-bracket HSU trunnion type, forged, for aluminium based OPGW conductors...

WARRANTY TERMS AND CONDITIONS OF SALE

Section 7 - Hardware & Fittings

EARTH WIRE FITTINGS 08

The reinforcing rods are incorporated in this assembly to ensure the optical fibres within the OPGW Range

Item Code Description Unit Qty Total

Compact temperature switch Model TCS

GD 1000 series. Made for ADVANCE 1/99 FORM NUMBER

Mini temperature switch Stainless steel switch enclosure Model TXS

Section 6 FIBERLIGN Hardware for ADSS

ezspan ADSS Short Span All-Dielectric Self-Support Loose Tube Cable


ezspan ADSS All-dielectric self-supporting loose tube cable

&HQWUH1DWLRQDO G ([SHUWLVH5pVHDX[

Contents Stay Rod Assembly Base Plates Cross Arms A Frames Platforms Threaded Rods Threaded Rod Assembly Overhead Line Hardware Stringing Hardware

Long Span ADSS All-dielectric self-supporting loose tube cable

RTD Elements c/w tails.

PROPOSED COST SCHEDULE OF MATERIALS FOR CONSUMER JOB AND OTHER JOBS

Section 5 Fiber Optics: FIBERLIGN Hardware for OPGW

INSTRUCTIONS FOR USE CAUTIONS AND WARNINGS

Drawing A Crankcase, Cylinder

Tape Barrier System 312. Wall Tape Barrier System 315. Rope Barrier System 316. Parking Safety Supplies 318 BARRIER POLES 8

CAS 460 2T 7.5. Impeller size motor poles 2=3500 r/min. 60 Hz. Installed power

16 - Swivels & Joining Links

M.K.Forge ISO 9001:2008 CERTIFIED. Specialist in: transmission stringing line, lifting tackles and all types of Forging

JUMO MIDAS Pressure transmitter

OAsys. Outside Plant. Metallic Joint Closure VXOK units. Features and Benefits

Pinch-On Single Ear Clamps

m sling murphyindustrialproducts.com HEAVY DUTY CARGO CONTROL 2x24ASDR # x 24 Axle Strap with D Rings

DEE Shackle IS: ( Part- II ) DEE SHACKLE. Pin Diameter. Eye Outside Diameter. e min

Excess Power Equipment

Earthing Rods, single-section SAFETY EQUIPMENT EARTHING AND SHORT-CIRCUITING DEVICES

SUSPENSION 04 CLAMPS

List of materials for 1Km. Of L.T line 1-Ph., 2-Wire AB cable (1 X 25+1X16) sq.mm using 8M X 200 KG. PSC Pole

ATL 12 ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. La =Lc + Stroke Lc T. Rear bracket SP. Stroke. Capacitor

(%$5$ PUMPS EUROPE S.p.A. &(175,)8*$/38036':2. &217(176 50Hz

Distribution Design Catalogue

Click. Campbell Fittings Table of Contents. on the section you want

Electronic Service Manuals

Introducing the AirBrake

PARTS BREAKDOWN. rev 0_06/25/2010. Page 1 of 15 PB _rev 0

Distribution Design Catalogue

INSTALLATION INSTRUCTION PEM1468ENG ENGLISH VOLTAGE BOOSTER MOUNTING GUIDE VBXXK-3P-000 VBXXK-3P-001

DUMPER. Data Book 50 Hz

Company Profile. ZTT Cable was established in 1992, and now becomes a public high-tech enterprise with 33 subsidiaries, and about 7,000 employees.

DUMPER. Data Book 50 Hz

EXCLUSIVE AUSTRALIAN DISTRIBUTORS

Product Name Chair Conversion Kit (to LR Delivery Unit) Installation [Kit # xx]

DUMPER. Data Book 50 Hz

TRU-LIFT Sectional Door Hardware

We Make Good Neighbors!

T T. Aluminium lifting equipments Alu removable jib crane. Accessories. Alu removable jib crane

Thank you for choosing KOH-I-NOOR Mladá Vožice a.s. as the supplier of components for pressurized (aerosol) and non-pressurized containers.

Gas-actuated temperature switch Stainless steel switch enclosure Model TWG

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

bar -20 C C ( C for high temperature version) 1000 mm

ATTIX 560 XC, 761 XC, 763 ED

BRIDGE HARDWARE (WHOLESALE SUPPLIES) Tel: Fax: PRODUCT GUIDE

600/1000V, PVC Insulated Cables according to IEC

Wire rope accessories. 5. Wire rope accessories. Index

Azur SG2400. Mounting bar awning SG2400. Description. Options:

- DIMENSIONS AND WEIGHT 400 PUMP DUMPER 1X SERIES 400 PUMP DUMPER 2X SERIES 401 PUMP DUMPER 3X, 4X, 5X, 6X, 7X, 8X SERIES 402 PACKING 403

SPIRAL VIBRATION DAMPERS FOR AAC, AAAC, ACSR, COPPER, SC/AC & SC/GZ CONDUCTORS. Part Number

Hinges. Various hinges. Stainless steel hinge with removable pin. Removable pin hinges with nylon washers. Removable pin.

Accessories. Aluminum Duplex Sleeves (Hour glass shape) Aluminum Oval Sleeves. Copper Duplex Sleeves or Copper Zinc Plated Duplex Sleeves Code Copper

SUSPENSION 04 CLAMPS

1.0 CABLE TIES AND ACCESSORIES. Cable ties and accessories 1.0. Cable ties and accessories

Packaging and Transport technology Lifting & Lashing Hygiene in the workplace lashing straps for any application

SCREW HOSE COUPLINGS SCREW HOSE COUPLINGS B.1. STANDARD. LMC s screw hose couplings with a smooth hose shank comply with EN / DIN 2817.

PCB plug-in connectors

LB data sheet parts list exploded view dimensional drawing sectional drawing performance curve. parts list as Excel-spreadsheet

THERMOMETERS FOR TRANSFORMERS

Compact Rope-Activated Emergency Stop Switch. DIN mounting pattern for a globally recognized mounting configuration

TENSION CLAMPS AND JOINTS. General Wedge tension clamp without jumper guide, for aluminium based conductors... 79

STANDARD 80 SERIES GUYED TOWER GENERAL USE FEATURES. Phone (309) Fax (309) The Industry Standard

Garden Lamps. Product Features. Applications

Section 5 FIBERLIGN Hardware for OPGW

Integral E-stop the lid-mounted E-stop button provides emergency stopping capability at the extreme end of the installation

Command devices Pull-wire emergency stop switches One-side operation ZS 71 range Schmersal Industrial Switchgear.

LINE FITTINGS I N D E X

Catenary Components For Local Transport Systems

RAUTER Sensor-Boxes - 1 -

CLA 25 AC motor ACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Rear bracket SP. Stroke. Capacitor. Standard head with threaded hollow bore BA

Integral E-stop the lid-mounted E-stop button provides emergency stopping capability at the extreme end of the installation

Product Name Chair Conversion Kit (to Console Delivery Unit) Installation [Kit # xx]

Armor Rods. Armor Rods NOMENCLATURE GENERAL RECOMMENDATIONS

Compact differential pressure switch Models DC, DCC

RPPN6 - RPPN8 Industrial pressure switch with high overpressure resistance

SMALL CHAINS AND FITTINGS

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS

KISS 450 PLANS AND NOMENCLATURE

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT

ATTIX 5. Part List US-English

DIAMO VELOCITY 50 BODY PARTS CATALOG

FIBERGLASS DEAD-ENDS & TANGENT ARMS

Tensioning equipment. Handling and uncoiling blocks 148. Tensioning equipment 149. Hoist ratchet and Guying equipment 151.

Transcription:

Helical dead-ends are installed on ADSS cables over medium spans (100 to 250 meters). They consist of 4 armour rods installed as a direct protection on the cable and a spiral dead-end used as an anchor and installed on the armour rod protection. Each helical dead-end set is including: - 4 armour rods - 1 helical dead-end In addition to this helical dead-end, different accessories should be ordered depending on the pole structure and configuration: - 1 thimble - 1 extension link or 1 turnbuckle - 1 pole bracket - 1 fixing method for the bracket to the pole (bolt, pole banding)

Helical dead-end Armour rod Designation Capacity Wire Ø Qty of Length mm Wire Ø Qty of Length mm Weight mm mm wires L L1 mm wires L M kg GSDE AR 1050 white GSDE AR 1150 yellow GSDE AR 1250 black GSDE AR 1290 green GSDE AR 1350 blue GSDE AR 1420 red GSDE AR 1530 brown 10,5-11,3 3,25 5 820 533 2,18 11,5-12,6 3,25 5 820 533 2,18 12,5-13,6 3,25 5 820 533 2,18 12,9-14,6 3,25 5 820 533 2,18 13,5-14,5 3,25 5 820 533 2,18 14,2-15,2 3,25 5 820 533 2,18 15,3-16,6 3,25 5 820 533 2,18 (3x3)+5 = 14 (3x4)+3 = 15 4x4 = 16 4x4 = 16 (3x4)+5 = 17 (3x5)+3 = 18 (3x5)+3 = 18 1015 330 1,530 1015 330 1,570 1015 330 1,610 1015 330 1,625 1015 330 1,655 1015 330 1,665 1015 330 1,685. Packaged in pairs of sets (1 set = 1 helical dead-end + 4 armour rods secured together with black plastic ties).

Thimble: To be ordered separately. Product information Associated products: Thimbles Thimble type A U shaped thimble with pin bolt Weight : 0.32 kg Can be used with any extension link Thimble type B C shaped thimble Weight : 0.12 kg Can be used with any extension link Thimble type C Aluminium thimble with pin bolt Aluminium Weight : 0.35 kg Can be used with any extension link

Associated products: Extension links Turnbuckle M12 30/04 Eye Ø : 20mm Length between eyes : 230 310mm Min. breaking load : 3000 dan Packaging : carton of 50 units Weight : 0.5 kg Turnbuckle M16 Eye Ø : 25mm Length between eyes : 290 380mm Supplied with 2 nuts Min. breaking load : 5000 dan Packaging : carton of 25 units Weight : 0.85 kg Extension link xxx mm Length between securing points : 300mm Packaging : bag of 10 units Weight : 1.25 kg

Associated products: Shackles The shackle is used for securing the extension link or turnbuckle on any fixing point on the pole. Shackle M10 SH600 Min. breaking load : 1800 dan Packaging : carton of 50 units Weight : 0.12 kg Shackle M12 with safety pin Min. breaking load : 6000 dan Packaging : carton of 25 units Weight : 0.36 kg Shackle M16 with safety pin Min. breaking load : 9750 dan Packaging : carton of 25 units Weight : 0.36 kg Manille M16 avec goupille

Associated products: Pole brackets Pin type bracket 7/05 Securing with 2 pole bands. Min. breaking load : 2000 dan Packaging : bags of 25 units Weight : 0.35 kg Universal pole bracket UPB Securing with 2 pole bands or 1 bolt Ø 14 or 16mm. Min. breaking load : 3000 dan High strength aluminium alloy Packaging : carton boxes of 30 units Weight : 0.2 kg Pole collar 7/00 Direct fixing on round poles with Ø around 110mm Min. breaking load : 5000 dan Supplied unassembled Packaging : 10 units Weight : 2.42 kg Pole collar 7/01 Direct fixing on round poles with Ø around 135mm Min. breaking load : 5000 dan Packaging : 10 units Weight : 3.52 kg

Bolts Associated products: Securing on poles Bolt BH14x225/145 Ø 14mm Total / Threaded lengths : 225mm / 145mm Supplied with 1 nut and 1 curved washer 70x35x5mm Hexagonal head Packaging : bags of 50 units Weight : 0.38 kg Bolt BH16x300/100 Ø 16mm - Total / Threaded lengths : 300mm / 100mm Supplied with 1 nut, 1 flat washer 50x50x5mm and 1 flat washer 75x50x5mm Hexagonal head Packaging : bags of 25 units Weight : 0.68 kg Banding Pole banding 20x0.7mm SB207 20x0.7mm band - 50m roll Supplied in plastic dispenser Stainless steel AISI304 Packaging : carton of 5 rolls Weight : 5.1 kg Heavy type buckle 20mm BIB20 Heavy type buckle adapted to 20mm pole band Stainless steel AISI304 Packaging : bag of 100 units Weight : 1 kg (per bag) Band installation tool BTS Screw type Protected steel Packaging : unit Weight : 2 kg