TRUELOK PARTS REFERENCE GUIDE

Similar documents
PRICE LIST Effective January 1, p f

HD BULL NOSE FRONT BUMPER FORD SUPERDUTY F PARTS LIST:

INSTALLATION INSTRUCTIONS Product Revision Form Rev. C INST-439 CRADLE, DELL E-6510/6500

Horizontal Fiber Optic Splice Closure (FOSC) Installation Manual

Parts list ErgoStrap 600E Frame - Cutter - Strap lifter

PARTS LIST: ELEVATION BULL NOSE FRONT BUMPER FORD SUPERDUTY F

B1-OPCL Installation Manual

Horizontal Fiber Optic Splice Closure (FOSC) FOSC-GPJ-A024. Installation Manual

The HMC-Lite Construction Guide

DCS7901. Documents DCS Fuel tank, tubular grip. 2 Hood, air filter, muffler. 3 Cylinder, crankcase. 4 Ignition electronics, starter

Fore- and Midfoot System 2.0 / 2.3, 2.8

JBR Adjustable Short Shift Plate Kit Pre-Installation Instructions. Attaching the stand-off to the Shift Plate

Slotted ConneCtorS 4. Fixed BoltS 8. Fixed reduction BoltS 10. Polyaxial BoltS 12. Polyaxial reduction BoltS 13. iliac BoltS and SCrewS 14

AFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)

Luminator Low-Rise Headlight. Designed and built by Radioflyer Innovations

STEERING AND SUSPENSION section 2

Assortments and storage units

Step #1 From your spool of 18 gauge primary wire, cut between 11 and 21 three inch strips of wire. You will only need 11 for the ROV, but it is good t

GENERAL ACCESSORIES. Hose Whip Assembly with Filter Lubricator. Hose Whip Assembly with Lubricator. Safety Lock Cable

SONIC GM Express Service Tool Kit*

Furnital srl via Manzoni Montano Lucino (Co) - Italy Tel Fax

B.W AND POINTS HITCH LEAF AND DEBRIS BLOWERS

CO₂ Sensor Replacement (RF598 and RF602) Installation Instructions

TECHNICAL APPLICATIONS. Metalpak Sb200

PLEASURE BOAT EQUIPMENT

rev 0_ DCS6421 PS-6400 PS-6400H

D Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99

ONE TOUCH FITTINGS Series WP2

Passenger/Right Upper U- Bracket OE fog light only. Driver/Left Upper U- Bracket OE fog light only. Winch Tray

English 1/2015. The Profi le System

Why Dynamic Toolboxes?

Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks INSTALLATION INSTRUCTIONS

Service Bulletin. HIITMill (X) Brake Lever Drift

ELECTRIC TOOL PARTS LIST

Tool Roll 11 parts. KNIPEX Minis in belt pouch 2 parts TOOL ASSORTMENT

XP 17 PLANS AND NOMENCLATURE

25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)

E3 VISE ACTION Compression Latch

KISS 450 PLANS AND NOMENCLATURE

Passenger/right Upper U- Bracket OE fog light only. Driver/Left Upper U- Bracket OE fog light only. Winch Tray

Installation Guide Folding L-Bracket with Display Mounting Extension and Keyboard Tray for M-Series or VHM Arm

Flue Space Installation Instructions

04 Spanners and Wrenches

Spanners. Spanners. Open-ended spanners DIN 3110 Chromium plated - < 15

Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...

UFlex Storage System. Anodized aluminum. Thermal plastic bumper. A wealth of possible combinations STORAGE

Function: Used to connect profiles at adjustable angles. Features: 1. Adjustable angles. Item Description For Screw Weight (g) Colour Finish Material

BRIX COMPONENTS & ACCESSORIES

20 DRAWER 23 DRAWER. 5, MTZBK7217MZ + MTZBK7200H + MTZBK7203SL Overall Dimensions: 91 W x 30 D x 75-1/2 H. Hutch MTZBK7200H.

MONGOOSE. Introduction. < blueroomelectronics > Assembly Instructions. Mongoose was designed as an introduction to Mechatronics.

PLUS. 5 x 9. Magnetic Tray SKU x 11. Magnetic Tray SKU Four Powerful Magnets with Protective Rubber

PRODUCT INFORMATION MDO 2.0. MODUS Mandible

argco.com

Kinze 3000 Series Row Unit. Hydraulic Actuator Installation Instructions PN: ENG REV. A

SCC 201 E Valid as of E21SE0404 up to E21SE... SCC 201 E

REDUCER BAT/17277: 10/6 T CONNECTORS BAT/17356: 10/10/10 BAT/16295: 10/6/10 BAT/17354: 6/10/6 BAT/21764: 6/6/6 WASH LOCKER

Skyline 4 Fascia Fabrication & Installation Instructions

ELECTRIC TOOL PARTS LIST

HR ZDX Throttle Body Install (06-11 Civic Si)

Installation Instructions PLEASE READ ALL INSTRUCTIONS BEFORE INSTALLATION

Ford Racing GT500 Style Strut Mount Upgrade (05-12 All):

3/12/2018 Lego Digital Designer

INSTALLATION INSTRUCTIONS AOS-R (Air Oil Separator-Return) Turbo Subaru and STi

CNC System. Tool holder inserts CNC Tool carriers CNC Tool block Perfo Panels and Perfo Back Panels

DPC6430. Documents DPC Tank and handle grips. 2 Hood, air filter. 3 Muffler, connecting muff. 4 Carburetor. 5 Starter assy., ignition assy.

Magnetic cylinders Series 27 1/ Double-acting, magnetic ø 20, 25, 32, 40, 50, 63 mm

Mechanical load securing

Speed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.

Spare parts list Pentruder Modular Drilling System

Repair Parts Coulter Applicator Repair Parts

Complete Workstations

ELECTRIC TOOL PARTS LIST

CorkSport ort Mazda 3 Adjustable Shifter Mazdaspeed 3, Mazda 3 6-speed and Mazda3 SkyActiv 6-speed

Brake Line Replacement Instructions, Saleen 14-inch Brake Kit For S281/Mustang

Personal Care Commode

RC4WD TrailFinder Instruction Manual

ELECTRIC TOOL PARTS LIST

Electrical Vehicle Service Parts Manual CEV2. Service Parts Manual

Product Catalogue. Version 8.0. Section. FUWA Axle Components

FLOODLIGHT unit IMPORTANT WARNING! RRAC055/RRAC059. INSTALL TIME: 30 mins

IAG Air / Oil Separator (AOS) For STi

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN

ELECTRIC TOOL PARTS LIST

INDEX - ALUMINIUM RANGE HINGES. profile 0.35 N.m. FinAlu continuous hinge 466. profile 0.70 N.m. Aluminium profile continuous hinge - 50 mm

ROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free

SPARE PARTS LIST - Tanzania V 50/60Hz. Version 2.4

COUPLING CATALOGUE. Push-In, Standard, Conventional, Accessories

Wall / Casework Mounted Delivery Systems (Procenter)

ELECTRIC TOOL PARTS LIST

Industrial Equipment HYDRAULIC TOOLS

DAH Left Hand Hose Inlet Kit Instruction Sheet For Use with 700 SERIES DAH Dilution at Hand Blend Centers

MISCELLANEOUS WOOD CHISEL

KIT 120 ASSEMBLY INSTRUCTIONS

Around the cable. Socket sleeves.... convincing solutions

Assault Air Bike Assembly Instructions

MEC TRON 19 RACK CABINETS SERIES

Class II appliances. Online. Guarantee for success. Dentaurum. shop.dentaurum.com

STORAGE & MATERIAL HANDLING

Assembly Manual. 1/10th World GT car

CYLINDER HEAD. Ref. Part No. Number Description Qty Remarks

Transcription:

TRUELOK PARTS REFERENCE GUIDE

External Supports 450500 A combination of any three layers can be combined to form a full rings tray. Rings 56-10840 56-10860 56-10890 56-10900 56-10910 56-10920 56-10930 56-10940 56-10950 56-10960 56-10970 56-10980 Internal Diameter 80mm 100mm 120mm 130mm 140mm 150mm 160mm 170mm 180mm 200mm 220mm (*) 240mm (*) Half Rings 56-11570 56-11580 56-11590 56-11600 56-11610 56-11620 56-11630 56-11640 56-11650 56-11660 56-11670 56-11680 Internal Diameter 80mm 100mm 120mm 130mm 140mm 150mm 160mm 170mm 180mm 200mm 220mm (*) 240mm (*) 5/8 Rings 56-12580 56-12590 56-12600 56-12610 56-12620 56-12630 56-12640 56-12650 56-12660 Internal Diameter 100mm 120mm 130mm 140mm (*) 150mm 160mm (*) 170mm 180mm (*) 200mm (*) Foot Plate 56-13580 56-13590 56-13600 56-13610 56-13620 56-13630 56-13640 56-13650 56-13660 Internal Diameter 100mm 120mm 130mm 140mm (*) 150mm 160mm (*) 170mm 180mm (*) 200mm (*) (*) Out of the tray

Double Row Foot Plate (Out of the tray) 56-13625 56-13635 56-13655 56-13665 Internal Diameter 150mm 160mm 180mm 200mm TrueLok RockerRail (Out of the Tray) 56-24000 (2 items) TL Dynamization Module (Out of the tray) 54-24100 99-54-24100 (Sterile) Hinges, Distractors and Connections 450504C

Universal Hinge 55-1176 Cannulated Inline Hinge Assembly 51-10430 100mm Outboard Hinge Assembly 51-10440 100mm Hinge Rod, Threaded 51-10300 51-10550 60mm 150mm Telescopic Linear Distractor 50-11010 50-10140 50-10150 50-10160 70mm 100mm 150mm 200mm 99-50-11010 99-50-10140 99-50-10150 99-50-10160 70mm 100mm 150mm 200mm Sterile (out of the tray) Sterile (out of the tray) Sterile (out of the tray) Sterile (out of the tray) Quick Adjust Strut 50-10170 Short 50-10180 Medium 50-10190 Long 99-50-10170 Short (Sterile - out of the tray) 99-50-10180 Medium (Sterile - out of the tray) 99-50-10190 Long (Sterile - out of the tray) Plates 55-10340 55-11670 55-11671 55-11680 20mm 30mm 40mm 50mm

Telescopic Hinge Extender 51-10220 Spacers 54-11650 54-11660 Oblique Support 55-10.99 Threaded Rods 55-11720 55-10530 55-10060 55-10070 55-11730 55-11740 55-11750 100mm 15mm 30mm 60mm 85mm 115mm 165mm 200mm 300mm 400mm Angular Distractor 51-10460 51-10470 100mm 150mm Bracket Assembly, Swivel Stud, Angular Distractor 51-10462 Foot Plate Extension 56-14580 56-14590 Holes Three Five Arch 55-10760 55-10800 90mm 120mm

(TL+) Foot & Ankle Kit 450502C TL Plus Bayonet Wire with olive 54-1217 Size Ø 1.5mm x 300mm TL Plus Bayonet Wire without olive 54-1218 Size Ø 1.5mm x 300mm TL Plus Tension Limiter 54-1141 TL Plus Washer 54-1143 4mm Thick TL Plus Hinge Female High Profile 56-24050 TL Plus Hinge Female Low Profile 56-24051 TL Plus 90 Hinge High Profile 56-24060

TL Plus 90 Hinge Low Profile 56-24061 TL Plus Hinge Male High Profile 56-24070 TL Plus Hinge Male Low Profile 56-24071 TL Plus non Lockable Universal Joint 51-10420 TL Plus Threaded Hinge Rod 51-10290 50-1010 30mm TL Plus Nylon Insert Nut TL Plus Twisted Plate 54-11670 54-11680 54-11690 2 Holes 3 Holes 4 Holes TL Plus 90 Plate 81641 81642 81643 1 Holes 2 Holes 3 Holes

Fixation Elements 450503C Bayonet Wire with Stopper 54-1215 Size Ø 1.8mm x 400mm Bayonet Wire 54-1216 Size Ø 1.8mm x 400mm Universal Wire Fixation Bolt 54-1152 TL Short Bolt, Wire Fixation, Universal 54-1151 Slotted Washer 54-1064 Half Pin Quick Connect (Out of the tray) 54-11230 54-11240 54-11250 Size 4mm x 180mm 5mm x 180mm 6mm x 180mm Size 99-54-11230 4mm x 180mm Sterile 99-54-11240 5mm x 180mm Sterile 99-54-11250 6mm x 180mm Sterile

XCaliber Screws (Out of the tray) non HA coated 99-9115xx * 99-9126yy * HA coated 99-6115xx * 99-6126yy * Size xxmm x 150mm yymm x 260mm xxmm x 150mm yymm x 260mm Universal Half Pin Fixation Bolt 54-11530 Accepts 4mm- 5mm-6mm Half Pin TrueLok 8mm Half Pin Fixation Bolt 54-11540 Accepts 5mm- 6mm Half Pin Posts 54-11600 54-11610 54-11620 54-11630 54-11640 Bolts 54-1010 54-1018 54-10.50 Nut 50-1008 Holes One Two Three Four Five 16mm 20mm 12mm 10mm Hex Head Distraction Nut 50-13010 Extended Nut 50-13020 10mm Square Head with Captured Washer 10mm Hex Head Note: Ask Customer Service for availability in your country * xx and yy refer to the thread lenght (range 30-90mm, step 10mm)

Spacing Washer 54-1142 Thickness 2mm Conical Washer Couple 54-1150 Rubber Stoppers 54-1133 54-1136 Wire Stopper (red) Half Pin Stopper (grey) Stopper Applicator 54-1134 M6 X 1 Hex, Speednut 54-2235 Instruments 450501C

Hex Driver 52-1018 Straight, 1/8 Hex Driver 52-1020 90, 1/8 Hex Driver 52-10210 1/8 Power Adapter Wire Cutter W1003 Wire Tensioner 54-1139 20116735 TL Short Tensioner Tip

Surgeon Wrench (10mm) 54-1154 Surgeon Wrench, Hinged (10mm) 54-1155 Tubular Wrench (10mm) 54-2226 10mm Needle Nose Pliers 54-2227 T-Handle 54-2229 T-Handle for Half Pins Universal T-Wrench 91150 Double Wrench (10mm) (Out of the tray) 52-1061 For Distraction Nuts (Packaged Separately) Bolt Wrench 8mm (Out of the tray) 54-11560

Instrument Tray, TrueLok 450501 Quantity W1003 Wire Cutter 1 54-1139 TL Plus Wire Tensioner with Tip 2 54-2227 Needle Nose Pliers, Stainless Steel 2 52-1018 TL, 1/8' Hex Driver 1 52-1020 TL, Hex Driver, 90-Degree, 1/8" 1 54-1154 TL,Wrench, Combo, 10mm 2 54-1155 TL,Wrench, Hinged Combo, 10mm 2 54-2226 TL, 90 Degree Tubular Wrench 2 91150 Universal T-Wrench 1 52-10210 TL+ AO 1/8' Hex Power Driver Attachment 1 54-2229 T-Wrench With AO Connection 1 Ring Tray, TrueLok 450500 A combination of any three layers can be combined to form a full rings tray. 450500-01C - LAYER 80-100 COMPLETE Quantity 56-10840 TL Plus Full Ring 80mm 4 56-11570 TL Plus Half Ring 80mm 2 56-12580 TL Plus Five Eighths Ring 100mm 1 56-10860 TL Plus Full Ring 100mm 4 56-11580 TL Plus Half Ring 100mm 2 56-13580 TL+ Footplate 100mm 1 450500-02C - LAYER 120 COMPLETE Quantity 56-10890 TL Plus Full Ring 120mm 4 56-11590 TL Plus Half Ring 120mm 2 56-12590 TL Plus Five Eighths Ring 120mm 1 56-13590 TL Plus Footplate 120mm 1 450500-03C - LAYER 130 COMPLETE Quantity 56-10900 TL Plus Full Ring 130mm 4 56-11600 TL Plus Half Ring 130mm 2 56-12600 TL Plus Five Eighths Ring 130mm 1 56-13600 TL+ Footplate 130mm 1 450500-04C - LAYER 140 COMPLETE Quantity 56-10910 TL Plus Full Ring, 140mm 4 56-11610 TL Plus Half Ring 140mm 2 56-12610 TL Plus Five Eighths Ring 140mm 1 56-13610 TL+ Footplate 140mm 1 450500-05C - LAYER 150 COMPLETE Quantity 56-12620 TL Plus Five Eighths Ring 150mm 1 56-13620 TL Plus Footplate 150mm 1 56-10920 TL Plus Full Ring, 150mm 4 56-11620 TL Plus Half Ring 150mm 2 450500-06C - LAYER 160 COMPLETE Quantity 56-10930 TL Plus Full Ring 160mm 4 56-11630 TL Plus Half Ring 160mm 2 56-12630 TL Plus Five Eighths Ring 160mm 1 56-13630 TL+ Footplate 160mm 1

450500-07C - LAYER 170 COMPLETE Quantity 56-10940 TL Plus Full Ring, 170mm 4 56-11640 TL Plus Half Ring 170mm 2 56-12640 TL Plus Five Eighths Ring 170mm 1 56-13640 TL+ Footplate 170mm 1 450500-08C - LAYER 180 COMPLETE Quantity 56-10950 TL Plus Full Ring 180mm 4 56-11650 TL Plus Half Ring 180mm 2 56-12650 TL Plus Five Eighths Ring 180mm 1 56-13650 TL+ Footplate 180mm 1 450500-09C - LAYER 200 COMPLETE Quantity 56-10960 TL Plus Full Ring, 200mm 4 56-11660 TL Plus Half Ring 200mm 2 56-12660 TL Plus Five Eighths Ring 200mm 1 56-13660 TL+ Footplate 200mm 1 Fixation Elements Tray, TrueLok 450503 Quantity 50-1008 TL, Nut, Stainless Steel, 10mm 120 50-13010 TL+ Metal Distraction / Compression Nut 16 50-13020 TL+ Extended Nut M6 X 1 10 54-1010 TL, Bolt, 16mm 24 54-1018 TL, Bolt, 20mm 12 54-10.50 TL, Bolt, 12mm 24 54-1064 TL Washer, Slotted 8 54-1133 Stopper, Red Rubber, Wire 27 54-1136 Stopper, Gray Rubber, Half Pin 9 54-11530 TL+ Universal Half Pin Fixation Bolt 4mm - 6mm 12 54-11600 TL+ One Hole Post 4 54-11610 TL+ Two Hole Post 4 54-11620 TL+ Three Hole Post 4 54-11630 TL+ Four Hole Post 2 54-11640 TL+ Five Hole Post 2 54-1215 TL, Wire, W/Stopper, 1.8mm x 400mm 12 54-1216 TL, Wire, Bayonet, 1.8mm x 400mm 12 54-1134 TL, Applicator Rubber Stopper 2 54-1142 Stainless Steel Washer, 2mm Thick 12 54-1150 TL, Washer, Conical Pair 16 54-1152 TL, Bolt, Wire Fixation, Universal 24 54-1151 TL, Short Bolt, Wire Fixation, Universal 12 54-2235 M6 X 1 Hex, Speednut, Truelok System 16 54-11540 TL 8mm Half Pin Bolt 12

Hinges And Distractors Tray, TrueLok 450504 Quantity 51-10300 TL+ Threaded Hinge Rod, 60mm 4 51-10430 TL+ Cannulated Inline Hinge Assembly 2 51-10440 TL+ Outboard Hinge Assembly 2 51-10460 TL+ Angular Distractor Assembly, 100mm 1 51-10470 TL,Bolt, 12mm 1 51-10550 TL+ Threaded Hinge Rod 150mm 4 55-10060 115mm Threaded Rod 8 55-10070 165mm Threaded Rod 8 55-10340 TL Plus 20mm Plate 8 55-10530 85mm Threaded Rod 8 55-10.99 TL, Oblique Support 4 55-11670 TL+ 30mm Plate 4 55-11671 TL+ 40mm Plate 4 55-11680 TL+ 50mm Plate 4 55-11720 60mm Threaded Rod 8 54-11650 TL+ Hex Standoff 4 54-11660 TL Plus Hex Standoff 30mm 8 55-1176 TL, Hinge, Universal 4 55-11730 TL+ Threaded Hex End Rod 200mm 4 55-11740 TL+ Threaded Hex End Rod 300mm 4 55-11750 TL+ Threaded Hex End Rod 400mm 4 51-10220 TL+, 100mm Telescopic Hinge Extender 2 56-14580 TL+ Foot Plate Extension 3 Hole 4 56-14590 TL+ Foot Plate Extension 5 Hole 4 55-10760 TL Plus 90mm Arch 2 55-10800 TL Plus 120mm Arch 2 51-10462 Bracket Assembly, Swivel Stud, Angular Distractor, Truelok 2 50-10140 TL+ Telescopic Linear Distractor 100mm 4 50-10150 TL+ Telescopic Linear Distractor 150mm 4 50-10160 TL+ Telescopic Linear Distractor 200mm 4 50-11010 TL+ Telescopic Linear Distractor 70Mm 4 50-10170 TrueLok Plus Short Quick Adjust Strut 4 50-10180 TrueLok Plus Medium Quick Adjust Strut 4 50-10190 TrueLok Plus Long Quick Adjust Strut 8

(TL+) Foot & Ankle Kit 450502 Quantity 54-1217 TL Plus Bayonet Wire with olive L300mm Ø1.5mm 12 54-1218 TL Plus Bayonet Wire without olive L300mm Ø1.5mm 12 54-1213 TL Plus X-Wire with olive L300mm Ø1.5mm on demand 54-1214 TL Plus X-Wire without olive L300mm Ø1.5mm on demand 54-1141 TL Plus Tension Limiter 4 54-1143 TL Plus Washer 4mm Thick 12 54-1143M TL Plus Washer 4mm Thick pack of 10 56-24050 TL Plus Hinge Female High Profile 12 56-24051 TL Plus Hinge Female Low Profile 4 56-24060 TL Plus 90 Hinge High Profile 4 56-24061 TL Plus 90 Hinge Low Profile 4 56-24070 TL Plus Hinge Male High Profile 4 56-24071 TL Plus Hinge Male Low Profile 4 51-10420 TL Plus non Lockable Universal Joint 4 51-10290 TL Plus Threaded Hinge Rod L30mm 4 50-1010 TL Plus Nylon Insert Nut 12 50-1010M TL Plus Nylon Insert Nut Pack of 10 54-11670 TL Plus Twisted Plate 2 Holes 3 54-11680 TL Plus Twisted Plate 3 Holes 3 54-11690 TL Plus Twisted Plate 4 Holes 3 81641 TL Plus 90 Plate 1 Hole 2 81642 TL Plus 90 Plate 2 Holes 2 81643 TL Plus 90 Plate 3 Holes 2 450502 TL Plus Foot&Ankle Kit Tray Empty 450502-01 TL Plus Foot&Ankle Kit Lid 450502-02 TL Plus Foot&Ankle Kit Base 450502C TL Plus Foot&Ankle Kit Tray Complete

Manufactured by: ORTHOFIX Srl Via Delle Nazioni 9, 37012 Bussolengo (Verona), Italy Telephone +39 045 6719000, Fax +39 045 6719380 www.orthofix.com Distributed by: 0123 TL-1007-PL-E0 H 12/17