20VAC / Universal Input Round LED DC Engines and LED DC Engine Retrofit Kits Ÿ High Density, high brightness chip array Ÿ Full CCT Option Available (Standard CCT s: 3000K,4000K) Ÿ Suitable for open or fully enclosed luminaires Ÿ 80 CRI standard and 90 CRI available Ÿ Suitable for luminaires with plastic and glass lenses Ÿ UL Recognized (DC Engine option) Ÿ Constant Current module design for maximum efficacy Ÿ UL Classified (DC Engine Retrofit Kit option) Ÿ Class 2 Lighting System Ÿ Suitable for DLC and Energy Star compliant luminaires Ÿ 20VAC dedicated or UNV options Ÿ Listed in Energy Star Certified Subcomponent Database Ÿ No Flicker (for rebate programs) Ÿ TRIAC/ELV or 0-0V Dimmable General Ratings Input Voltage TET/TKT: 20VAC;50/60 Hz TEM/TKM: 20~277VAC;50/60Hz Input Current 2RD = 0.75A Max @20VAC 25RD = 0.208A Max @20VAC 2RD = 0.075A Max @277VAC 25RD = 0.090A Max @20VAC Max. Input Power (UL) 2RD = 20.W 25RD = 24.8W Energy Star Input Power (Measured) 2RD = 9.W 25RD = 23.5W Max Lumen Output @ Full Power (80CRI*) 2RD = 2305 lumens @ 4000K 25RD = 2880 lumens @ 4000K Power Factor >.96 THD <20% Dimming Type/Range Leading Edge (TRIAC) or Trailing Edge (ELV) or 0-0V / 00% ~ 0% Beam Angle CRI Operating Ambient Temperature Range (Ta) Maximum Driver Case Temperature (Tc driver) Maximum Module Case Temperature (Tc mod) Estimated Lumen Maintenance at Max. Color Consistency Overall Size Weight Maximum Screw Installation Torque Safety/Compliance Nominal Operating Voltage Driver DC Module Warranty * At Tc mod = 25ºC ** www = PCB Rev # 20 80 (Standard), 90 available Engine: -35 to +50 C / -3 to +22ºF; Kit: -35 to +45 C / -3 to +3ºF TET/TKT: 80 C TEM/TKM: 86 C L70 = 90 C (Ts = 95 C) L90 = 85 C (Ts = 90 C) L70 = 50,000 hours L90 = 40,000 hours Binning per ANSI C78.377-20; 7 SDCM 9" diameter x.2 H TET/TKT: 320g TEM/TKM: 330g 35 inch - ounces DC Engines: curus (File # E35548: PTL23X20www**; Driver File # E342838) DC Engines Retrofit Kits: culus File # E36524 Class 2 Lighting System Compliant Energy Star Listed CSD 2RD: 24.2VDC TET/TKT: TT200700-30L 2RD: TM64RD05XX-2X 5 years 25RD: 30.2VDC TEM/TKM: TMUNV0700-30L 25RD: TM80RD05XX-2X Page of 7
ing Matrix T E T Compliance Control E = LED DC Engines T*** = TRIAC/ELV (UL Recognize) M*** = 0-0V ****K = DC Engine Retrofit Kit (UL Classified) 20 Engine Input Voltage 20*** = 20VAC UNV*** = 20~277VAC 02RD 40 Engine Input Power 02*** = 2W 025*** = 25W Color Temperature 27 = 2700K 30***=3000K 35 = 3500K 40***=4000K 50 = 5000K - 0 Configuration 0*** = 80 CRI = 90 CRI 2 = 80 CRI + Conf Coat 3 = 90 CRI + Conf Coat *** Indicates standard engine options. All others are built to order. **** LED Engine Retrofit Kit includes mounting hardware, retrofit labels, and installation instructions. TET/TKT: TRIAC/ELV Dimmable available only in 20VAC Input, TEM/TKM: 0-0V Dimmable available only in Universal Input. Electrical and Optical Specifications Color Temperature 3000K 4000K Thermal Specifications TET2002RD30-x TKT2002RD30-x TEMUNV02RD30-x TKMUNV02RD30-x TET20025RD30-x TKT20025RD30-x TEMUNV025RD30-x TKMUNV025RD30-x TET2002RD40-x TKT2002RD40-x TEMUNV02RD40-x TKMUNV02RD40-x TET20025RD40-x TKT20025RD40-x TEMUNV025RD40-x TKMUNV025RD40-x Storage Temperature Range Operating Ambient Temperature Range Maximum Case Temperature (Tc) Tc located on module Tc located on driver Input Power 9.W 23.5W 9.W 23.5W CAUTION: THIS LUMINAIRE HAS BEEN MODIFIED TO OPERATE LED LAMPS. DO NOT ATTEMPT TO INSTALL OR OPERATE FLUORESCENT LAMPS IN THIS LUMINAIRE. 70 lumens 2085 lumens 840 lumens 2240 lumens LED Engine -35 C to 00 C / -3 F to 22 F -35 C to 50 C / -3 F to 22 F Module : 90 C; Driver: 88 C/90 C LED Engine Retrofit Kit only: Hardware and Labels 240 lumens 2605 lumens 2300 lumens 2800 lumens 0 lm/w 0 lm/w 20 lm/w 9 lm/w Nominal Luminous Flux @ 90 CRI Model: TKxxxx02xRDxx-x Information. Replace only with: DRIVER MODEL #: Txxxx0700-30L LED MODULE #: TMxxRD05xx-2x Nominal Luminous Flux @ 80 CRI ) Electrical and optical specifications are based on a 2700K model and at Energy Star elevated case temperature. 2) Nominal lumen output and efficacies for standard models are calculated. Reference CCT vs Lumen Output chart for other CCT s. 3) Specifications are subject to change without notice. 4) Nominal luminous flux at 90 CRI are calculated values, not measured. 5) Refer to Energy Star CSD for actual measurements on specific part numbers. 6) Performance for these components have been tested in accordance with Energy Star. Efficacy @ 80 CRI LED Engine Retrofit Kit***** -35 C to 00 C / -3 F to 22 F -35 C to 45 C / -3 F to 3 F Module : 90 C; Driver: 88 C/90 C *****Suitable for wall sconce luminaire with minimum dimensions: 0.5 diameter with a height of.3. Refer to LED Engine Retrofit Kit Installation Instructions for further detail. This LED Engine Kit can retrofit any luminaire with a length/height greater or equal to the minimum dimensions shown on the Installation Instructions. This LED Engine Kit can be used with luminaires similar to the one illustrated on the Installation Instructions. Page 2 of 7
Mechanical Drawings Wire Length - Inches AC Input - Black / White 2 0-0V Dimming - Purple (0V+) / Gray (0V-) 2 Page 3 of 7
Termination Notes If connectors are used, use solid wire size 24 8 AWG, rated at a minimum 50V, minimum 05 C, and stripped to length between 6-7 mm (0.24-0.28 inches). Push button for insertion of conductor and for easy removal of wires. Connector not for multiple use Push Button Fastening Notes If fastening by screw hole, use any screw with diameter less than 0.85 in (4.7mm). Use all available screw holes to ensure good contact between back side of module and mounting surface. Refer to max specified torque for installation. Suggested screw sizes: #6 or M4 Pan Head screw. If fastening using double-sided tape, start with clean, dust-free surface. Peel backing and place LED module on mounting surface. Firmly press down on the module to ensure good adherence. Follow the double-side tape manufacturer s installation instructions. Environmental Rating LED DC Engines Modules are rated for dry locations, unless option for conformal coating is requested. Conformal coating is Acrylic/RTV based and rated for Environment and Moisture Protection per IPC-CC-830. Electrostatic Sensitive Product (ESD) Fulham LED products should be handled with proper measures to protect against any potential ESD damage. When servicing, personnel should be ground and direct contact with LED should be avoided. Thermal Management Proper thermal management should be employed to ensure life and reliability of product. Use of thermal grease, paste, pad, or other material interface is highly recommended. Polarity Notes LED Modules are polarity sensitive. Ensure that positive from LED Driver is connected to positive of LED modules and that negative from LED Driver is connected to negative of LED modules. Polarities of LED modules are marked with + for positive and - for negative. Page 4 of 7
Color and Binning Optical Spectrum 0,48 6,020K 5,30K 4,745K 4,260K 3,70K 3,220K 2,870K 0,46 2,580K 0,44 0,42 7,040K y 0,40 0,38 Blackbody Locus 0,36 0,34 0,32 0,30 0,30 0,28 0,32 0,34 0,36 0,38 0,40 0,42 0,44 0,46 0,48 0,50 x Ref. Nichia Chromaticity Diagram for ANSI bins For reference only. For more detailed info, contact factory. Value varies depending on product type and color rank Ref. Nichia LED Catalogue 203 For reference only. For more detailed info, contact factory. Thermal De-Rating CCT vs Luminous Flux Ambient Temperature (Ta) 25ºC 30ºC 35ºC 40ºC 45ºC 50ºC 55ºC 60ºC Thermal De-rating Multiplier 0.99 0.989 0.980 0.975 0.970 0.960 0.950 CCT 2700K 3000K 3500K 4000K 5000K Luminous Flux Ratio 0.87 0.93 0.96.00.07 Ref. Nichia LED757 Spec Sheet For reference only. For more detailed info, contact factory. Page 5 of 7
WIRING DIAGRAM (TYP) WHITE(COMMON) LINE HOT( 20V ~ 277V) BLACK WHT/BLK WALL SWITCH 0-0 DIMMING BLACK WHITE VIOLET GREY DRIVER xxxxxxxxx RED (+) BLUE (-) RED (+) TEST SWITCH FHS2-UNV-36L BALLAST MUST BE GROUNDED BLK RED NOTE: For illustration purposes, LED driver is shown separate from LED module. BATTERY DC ENGINES/KITS WITH EMERGENCY OPTIONS Engine/Kit TET2002RDxx-0 TKT2002RDxx-0 TEMUNV02RDxx-0 TKMUNV02RDxx-0 TET20025RDxx-0 TKT20025RDxx-0 TEMUNV025RDxx-0 TKMUNV025RDxx-0 Emer. Driver FHS2-UNV-36L FHS2-UNV-36L 4W Battery Part Number FHSBATT8-AA9 FHSBATL3- Harness (ma) FHS-HARNESS-00 NOTE: Emergency systems are not UL classified for field installation. Total Vf (V) Total Power (W) Total Lum. Output (lm)* Eff. (lm/w) 2.7 3.3 525 62 6W FHSBATL6-.6 FHS-HARNESS-250 2.9 5.5 870 59 FHSBATL3-.5 8W FHS-HARNESS-350 22.2 7.8 25 56 FHSBATL3-.5S 4W FHSBATT8-AA9 FHS-HARNESS-00 26.9 2.7 440 64 FHSBATL3-6W FHSBATL6-.6 FHS-HARNESS-200 27.2 5.4 875 6 8W FHSBATL3-.5 FHS-HARNESS-250 27.4 6.9 090 59 FHSBATL3-.5S Page 6 of 7
DC Engine Equivalency Chart Engine/Kit TET2002RDxx-0 TKT2002RDxx-0 TEMUNV02RDxx-0 TKMUNV02RDxx-0 DC Engine/Kit (9 Round) System Lumen Output 9.W 2300 lm (4K/80CRI) Efficacy 20 lm/w CFL Style Quad Triple Circline T9 Lamp 3W 8W 3W 8W 32W 32W # of Lamps Total 3 39W 2 36W 3 39W 2 36W 32W CFL 32W Lumen Output 2325 lm 250 lm 2475 lm 2040 lm 2040 lm 500 lm Efficacy 59 lm/w 59 lm/w 59 lm/w 56 lm/w 63 lm/w 46 lm/w TET20025RDxx-0 TKT20025RDxx-0 TEMUNV025RDxx-0 TKMUNV025RDxx-0 23.5W 2800 lm (4K/80CRI) 9 lm/w Triple Circline T9 42W 40W 42W 40W 2720 lm 975 lm 64 lm/w 49 lm/w For reference only, several factors apply. Certification Chart Model Classification TxT2002RDxx-x TxMUNV02RDxx-x TxT20025RDxx-x TxMUNV025RDxx-x Page 7 of 7