US Catalog Motor protection and control AF Range contactors & overload relays
Motor rated operational powers and currents The currents given below concern standard three-phase four-pole cage motors (500 r.p.m. at 50 Hz 800 r.p.m. at 60 Hz). These values are given for guidance and may vary according to the motor manufacturer and depending on the number of poles. IEC Motor nominal current: standardized values in blue colour (according to IEC 60947-4- Annex G) Motor power 0 V 30 V 40 V 380 V 400 V 45 V 440 V 500 V 660 V 690 V kw A A A A A A A A A A 0.06 0.37 0.35 0.34 0. 0. 0.9 0.8 0.6 0.3 0. 0.09 0.54 0.5 0.50 0.3 0.3 0.9 0.6 0.4 0.8 0.7 0. 0.73 0.7 0.67 0.46 0.44 0.4 0.39 0.3 0.4 0.3 0.8 0.63 0.6 0.58 0.53 0.48 0.37 0.35 0.5.6.5.4 0.9 0.85 0.8 0.74 0.68 0.5 0.49 0.37.0.9.8... 0.88 0.67 0.64 0.55.7.6.5.6.5.4.3. 0.9 0.87 0.75 3.5 3.3 3..0.9.8.7.5.5.. 4.9 4.7 4.5.8.7.6.4..7.6.5 6.6 6.3 6 3.8 3.6 3.5 3..9... 8.9 8.5 8. 5. 4.9 4.7 4.3 3.9.9.8 3.8.3 0.8 6.8 6.5 6.3 5.7 5. 4 3.8 4 5.7 5 4.4 8.9 8.5 8. 7.4 6.8 5. 4.9 5.5 0.9 0 9...5. 0. 9. 7 6.7 7.5 8. 7 5.9 6.3 5.5 4.9 3.6.4 9.3 8.9 39.7 38 36.4 3.. 9.3 7.6 3.4.8 5 53.3 5 48.9 30.5 9 8 5.4 3 7.8 7 8.5 63.8 6 58.5 36.8 35 33.7 30.7 8 75.3 7 69 43. 4 39.5 35.9 33 5. 4 30 00 96 9 57.9 55 53 48. 44 33.5 3 37 0 5 0 69 66 64 58 53 40.8 39 45 46 40 34 84 80 77 70 64 49. 47 55 77 69 6 0 97 93 85 78 59.6 57 75 40 30 0 39 3 7 6 06 8 77 90 9 78 66 68 60 54 40 8 97 93 0 355 340 36 05 95 88 7 56 8 3 3 48 400 383 4 30 0 84 40 34 60 509 487 467 95 80 70 45 4 69 6 00 637 609 584 368 350 337 307 80 03 50 78 748 77 453 430 44 377 344 6 50 35 983 940 90 568 540 50 473 43 37 33 355 09 06 07 64 60 588 535 488 370 354 400 55 00 50 76 690 665 605 55 48 400 500 545 478 46 895 850 89 745 680 55 493 560 77 65 583 000 950 96 83 760 576 55 630 98 844 767 6 060 0 99 848 643 65 70 64 070 984 53 90 47 043 95 7 690 800 446 340 43 47 346 97 79 076 85 780 900 760 640 530 598 58 463 330 4 90 880 000 304 90 789 76 673 63 466 339 04 970 UL/CSA Motor nominal current: single and three phase (according to UL 60947-4-A) Motor power 0 V -ph 00 V -ph 00 V 3-ph 08 V -ph 08 V 3-ph 0-40 V -ph 0-40 V 3-ph 380-45 V 3-ph 440-480 V 3-ph 550-600 V 3-ph hp A A A A A A A A A A /0 3.5 /8 3.8.9 /6 4.4.5.4. /4 5.8 3.3 3..9 /3 7. 4. 4 3.6 / 9.8 5.6.5 5.4.4 4.9..3. 0.9 3/4 3.8 7.9 3.7 7.6 3.5 6.9 3..8.6.3 6 9. 4.8 8.8 4.6 8 4..3..7 -/ 0.5 6.9 6.6 0 6 3.3 3.4 4 3.8 7.8 3. 7.5 6.8 4.3 3.4.7 3 34 9.6 8.7 0.6 7 9.6 6. 4.8 3.9 5 56 3. 7.5 30.8 6.7 8 5. 9.7 7.6 6. 7-/ 80 46 5.3 44 4. 40 4 9 0 00 57.5 3. 55 30.8 50 8 8 4 5 35 48.3 46. 68 4 7 7 0 6. 59.4 88 54 34 7 5 78. 74.8 0 68 44 34 7 30 9 88 36 80 5 40 3 40 0 4 76 04 66 5 4 50 50 43 6 30 83 65 5 60 77 69 54 03 77 6 75 9 8 96 77 00 85 73 48 65 4 99 5 359 343 3 08 56 5 50 44 396 360 40 80 44 00 55 58 480 30 40 9 50 604 403 30 4 300 7 48 36 89 350 88 560 44 336 400 954 636 477 38 450 030 55 4 500 80 786 590 47 B Motor protection and control
Motor protection and control AF Range contactors and overload relays Overview AF Range contactors and control relays Motor protection and control.
ABB sets a new standard in motor control and power switching Featuring AF technology as standard, the latest range of ABB's contactors establishes a new industry benchmark. The electronically controlled coil offers multiple benefits over conventional alternatives, and together with ABB's wide product offering an optimal configuration, every time. Access Global Support The contactor and motor protection range from ABB is compatible with all major national and international standards and is available worldwide via a global distribution network. One contactor coil now handles 00 V 50 V, AC/DC for use in Europe or Asia as well as North America. Optimize logistics With its contactor and motor protection range, ABB has managed to reduce the number of contactor coils to just four. The total number of product variants has been reduced by up to 90%. This simplifies the customers' logistics and cuts administration costs. Simplify design By reducing contactor coil energy consumption by up to 80%, panels can be built smaller and transformers more compact. All the features of the AF technology, along with access to drawings and coordination tables online, simplifies your design and assembly process. Secure uptime Time to prevent stoppages caused by voltage fluctuations. The AF contactor ensures distinct operation in unstable networks and signifies a major advance in motor control and power switching. Voltage sags, dips and surges pose no threat. The AF contactor secures your uptime.. Motor protection and control
MacGregor. Keeping turnarounds brief. Until the AF range was installed, voltage sags were affecting MacGregor's deck cranes. Conventional contactors welded shut, leading to several stoppages a week. No longer. Known for superior quality and an ability to operate in the most hostile environments, MacGregor deck cranes enjoy a global reputation for reliability. A small but vital component, the AF contactor helps maintain this reputation. To keep things moving, you need Control. Connect to Control. Explore all our case studies at www.abb.com/connecttocontrol SSAB Making certainty standard Gamesa Taming the wind LKAB Providing fresh air Motor protection and control.3
Contactors and motor protection For a wide variety of segments HVAC, General Machinery, Rail, Critical Power, Wind, Solar, Marine and Water & Wastewater Contactors for any use The AF contactor range covers small motor starting solutions from 4 kw / 5 hp up to big power switching solutions with our unique AF650, the biggest single case block contactor in the world. Coope with customers ABB cooperates closely with its customers to ensure that products meet requirements from their specific segments and applications. With over 00 years experience in motor control and power switching ABB knows how to create efficient solutions for its customers. The contactor and motor protection range is part of one of the widest product offerings on the market meaning that ABB not only can provide the contactor but the full solution. In addition to the standard product range ABB also offer products for special needs such as Bar contactors, GAF and contactors for capacitor switching..4 Motor protection and control
AF technology Benefits Reliable in all networks The electronic system within the AF contactor rectifies the AC or DC control circuit voltage to a DC control voltage that is applied on the coil. The contactor is safely operated in an always optimized condition making it virtually noise free. Four coils for the entire voltage range The AF contactor features both AC and DC support. With the complete AF contactor range, functionality is improved. Still, the total number of product variants compared to a conventional range is reduced by 90%. Only four coils are required to cover 4 V AC, 0 V DC - 500 V AC/DC. Wide control voltage range With conventional contactor technology, different contactors were needed for different network voltages. Thanks to the wide ope range of the AF contactor it can operate just as well in Europe as in Asia or North America. The core coil of the AF contactor range covers 00-50 V AC/DC 50/60 Hz. Built-in surge suppression With conventional contactor technology it is recommended to use an external surge suppressor, an accessory that could cost as much as half the contactor itself. With the AF technology the surges are handled by the contactor itself and the surge never reaches the control circuit. Neither the surge suppressor nor the actual surge has to be considered anymore. One less product and one less complication to worry about. Motor protection and control.5
Contactors and motor protection Advanced but simple The AF contactor is compact The AF contactor is compact in size and has had its width reduced by up to 30% thanks to an 80% reduction of the coil s energy consumption. The AF contactor is flexible AF09...AF370 is perfect for motor starting applications and for solutions where space is limited. Interlocked reversing pairs require no spacing between contactors meaning you can fit more functionality into cabinets or other small enclosures. Coil terminal access in the front The AF contactor has its coil terminals accessible from the front. The cables or bars do not have to be disconnected in order to perform voltage measurement or servicing work. More functionality without adding width The AF6... AF650 can take up to side mounted auxiliary contact blocks without adding to its width and are delivered with N.O. + N.C. as standard..6 Motor protection and control
Contactors and motor protection Mechanical features Front-mounted Top-mounted Easy-to-use accessories Contactors up to 96 A offer free choice of coil terminal access and can take side and front mounted auxiliary contact blocks. All the accessories: Coil connection terminals, mechanical and electrical interlocks and electronic timers are easily connected through the snap-to-connect function. Bottom-mounted Additional LDC4 coil terminal block Safe control circuit with: Mirror contact according to IEC 60947-4- Mechanically linked contacts according to IEC 60947-5- Sealable and transparent protective covers on AF09...AF96 and overload relays TF/EF Third party certification: - AF09...AF96, NF - AF400...AF050 Motor protection and control.7
.8 Motor protection and control
Motor protection and control.9
3-pole contactors, for motor control and power switching AC / DC Control supply Type AF09 AF AF6 AF6 AF30 AF38 AF40 AF5 AF65 AF80 AF96 IEC AC-3 Rated operational power θ 60 C for AF09... AF370 θ 55 C for AF400... AF650 0-30 - 40 V kw. 3 4 6.5 9 5 8.5 5 380-400 V kw 4 5.5 7.5 5 8.5 8.5 30 37 45 45 V kw 4 5.5 9 5 8.5 30 37 45 55 440 V kw 4 5.5 9 5 8.5 30 37 45 55 500 V kw 5.5 7.5 9 5 8.5 30 37 45 55 690 V kw 5.5 7.5 9 5 8.5 30 37 45 55 000 V kw Rated operational current 380-400 V A 9 8 6 3 38 40 53 65 80 96 AC- Rated operational current θ 40 C, 690 V A 5 8 30 45 50 50 70 00 05 5 30 UL / CSA -phase motor 0 V hp 0.75.5 3 3 5 7.5 7.5 40 V hp.5 3 3 5 5 7.5 0 5 5 0 3-phase motor 00-08 V hp 3 5 7.5 0 0 0 5 0 5 30 0-40 V hp 3 5 7.5 0 0 5 0 5 30 30 440-480 V hp 5 7.5 0 5 0 0 30 40 50 60 60 550-600 V hp 7.5 0 5 0 5 5 40 50 60 75 75 General use 600 V A 5 8 30 45 50 50 60 80 90 05 5 NEMA NEMA Size 00 0 3 Main accessories Auxiliary contact blocks Front mounting CA4-0 ( x N.O.) CA4-0 ( x N.C.) Side mounting CAL4- ( x N.O. + x N.C.) Timers Electronic TEF4-ON TEF4-OFF Interlocking units Mechanical VM4 VM96-4 Mechanical / Electrical VEM4 Connection sets For reversing contactors BER6-4 BER38-4 BER65-4 BER96-4 Surge suppressors Built-in surge protection Overload relays Thermal relays Class 0 TF4 (0.0 38 A) TF65 (...67 A) TF96 (40...96 A) (Class 0A for TF40, T00DU) Electronic relays Class 0E, 0E, 30E EF9 (0.0 8.9 A) EF9 (0.0 8.9 A) EF65 (5...70 A) EF96 (36...00 A) EF45 (9 45 A) Manual motor starters Thermal / magnetic protection Class 0 MS6 (0.0...3 A) SCCR up to 30 ka MS3 (0.0...3 A) SCCR up to 65 ka Magnetic only types MO3 (0.6...3 A) SCCR up to 65 ka Accessories For contactor mounting BEA6-4 BEA38-4 MS450 (8...50 A) SCCR up to 65 ka MS495 (45 00 A) SCCR up to 65 ka MO496 (3 00 A) SCCR up to 65 ka MO450 (40 50 A) MO495 (63 00 A) SCCR up to 65 ka SCCR up to 65 ka.0 Motor protection and control
AF6 AF40 AF46 AF90 AF05 AF65 AF305 AF370 AF400 AF460 AF580 AF750 AF50 AF350 AF650 AF050 AF650 30 37 45 55 55 75 90 0 0 3 60 0 57 35 55 75 75 90 0 3 60 00 00 50 35 400 475 560 55 75 75 90 0 3 60 00 0 50 355 45 500 600 75 90 90 0 3 60 60 00 0 50 355 450 560 670 75 90 90 0 3 60 00 50 50 35 400 50 560 700 55 75 90 3 60 00 50 35 35 355 500 600 750 900 75 0 3 3 3 3 0 80 355 400 6 40 46 90 05 65 305 370 400 460 580 750 860 050 60 00 5 75 350 400 500 600 600 700 800 050 60 350 650 050 650 30 40 40 50 60 75 00 5 5 50 00 50 40 50 50 60 75 00 5 50 50 00 50 300 400 450 75 00 00 5 50 00 50 300 350 400 500 600 800 900 00 5 5 50 00 50 300 350 400 500 600 700 000 50 60 00 00 30 () 50 () 300 () 350 () 400 () 550 650 750 900 0 350 650 00 700 4 5 6 7 8 () Higher s achievable through the use of LX.. terminal extensions. See page.6 for additional information. CAL9- ( x N.O. + x N.C.) CAL8- ( x N.O. + x N.C.) VM9 (for same size contactors) VM750H VM750V VM650H BER40-4 BER05-4 BER370-4 BEM460-30 BEM750-30 TF40DU (66...4 A) θ 55 C T00DU (66...00 A) θ 55 C EF46 (54...50 A) EF05 (63...0 A) EF370 (5...380 A) E500DU (50 500 A) E800DU (50 800 A) E50DU (375 50 A) Short-circuit protection devices Tmax circuit breakers & OS Fusible disconnect switches Motor protection and control.
4-pole contactors IEC AC- Rated operational current θ 40 C, 690 V A 5 30 45 55 UL/CSA General use 600 V A 5 30 45 55 AC / DC Control supply Type AF09 AF6 AF6 AF38 IEC AC- Rated operational current θ 40 C A 5 30 45 55 θ 55 C () A 5 30 40 45 θ 70 C A 6 3 37 With conductor cross sectional area mm 4 6 0 6 Rated operational voltage Ue max. V 690 690 690 690 UL/CSA General use 600 V A 5 30 45 55 () θ 60 C for AF09... AF38 contactors Main accessories Auxiliary contact blocks Timers Interlocking units Surge suppressors Front mounting Side mounting Electronic Mechanical Mechanical / Electrical Varistor (AC / DC) RC Type (AC) Transil diode (DC) CA4-0 ( x N.O.), CA4-0 ( x N.C.) CAL4- ( x N.O. + x N.C.) TEF4-ON TEF4-OFF VM4 VEM4 Built-in surge protection. Motor protection and control
AF Range contactors and control relays Table of contents Selection pages 3-pole contactors... -.8 3-pole reversing contactors...9 -.4 3-pole NEMA rated contactors...5 -.0 3-pole NEMA rated reversing contactors... -.5 4-pole contactors...6 -.7 Control relays...8 -.3 Voltage code table...3 -.33 Accessories Accessory fitting details...34 -.40 Auxiliary contact blocks...4 -.45 Electronic timers...46 Interlocks...47 Mechanical latching units...48 Other accessories...49 -.50 Terminal shrouds and mechanical lugs...5 Terminal enlargements and extensions...5 Terminal connecting strips and shorting bars...53 Reversing and phase-to-phase bus kits...54 Wye-delta bus kits...55 Coupling units...56 -.57 Mounting and adaptor plates...58 -.59 Service parts...60 Technical data 3-pole contactors...6 -.77 4-pole contactors...78 -.8 Control relays...8 -.84 Auxiliary contact blocks...85 -.88 Electronic timers...89 -.90 Interlocks...9 Mechanical latching units...9 Terminal marking and positioning 3-pole contactors...93 -.95 4-pole contactors...96 Control relays...97 Add-on auxiliary contacts...98 Motor protection and control.
AF09... AF38 3-pole contactors 5 to 0 hp at 480 V AC AC / DC operated AF09-30-0 AF6-30-00 AF09... AF38 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 0 V DC. These contactors are of the block type design with 3 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC --can manage large control voltage variations --reduced panel energy consumption --very distinct closing and opening. built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code power current θ 40 C motor use Uc min. Uc max. fitted ( pce) 400 V 480 V 600 V AC AC-3 AC- kw A hp A V 50/60 Hz V DC kg 4 5 5 5 4...60 - () 0 AF09-30-0-4 SBL3700R40 0.70 0 AF09-30-0-4 SBL3700R40 0.70 48...30 48...30 0 AF09-30-0- SBL3700R0 0.70 0 AF09-30-0- SBL3700R0 0.70 00...50 00...50 0 AF09-30-0-3 SBL3700R30 0.70 0 AF09-30-0-3 SBL3700R30 0.70 50...500 50...500 0 AF09-30-0-4 SBL3700R40 0.30 0 AF09-30-0-4 SBL3700R40 0.30 5.5 8 7.5 8 4...60 - () 0 AF-30-0-4 SBL5700R40 0.70 0 AF-30-0-4 SBL5700R40 0.70 48...30 48...30 0 AF-30-0- SBL5700R0 0.70 0 AF-30-0- SBL5700R0 0.70 00...50 00...50 0 AF-30-0-3 SBL5700R30 0.70 0 AF-30-0-3 SBL5700R30 0.70 50...500 50...500 0 AF-30-0-4 SBL5700R40 0.30 0 AF-30-0-4 SBL5700R40 0.30 7.5 30 0 30 4...60 - () 0 AF6-30-0-4 SBL7700R40 0.70 0 AF6-30-0-4 SBL7700R40 0.70 48...30 48...30 0 AF6-30-0- SBL7700R0 0.70 0 AF6-30-0- SBL7700R0 0.70 00...50 00...50 0 AF6-30-0-3 SBL7700R30 0.70 0 AF6-30-0-3 SBL7700R30 0.70 50...500 50...500 0 AF6-30-0-4 SBL7700R40 0.30 0 AF6-30-0-4 SBL7700R40 0.30 45 5 45 4...60 - () 0 0 AF6-30-00-4 SBL3700R400 0.30 48...30 48...30 0 0 AF6-30-00- SBL3700R00 0.30 00...50 00...50 0 0 AF6-30-00-3 SBL3700R300 0.30 50...500 50...500 0 0 AF6-30-00-4 SBL3700R400 0.350 5 50 0 50 4...60 - () 0 0 AF30-30-00-4 SBL7700R400 0.30 48...30 48...30 0 0 AF30-30-00- SBL7700R00 0.30 00...50 00...50 0 0 AF30-30-00-3 SBL7700R300 0.30 50...500 50...500 0 0 AF30-30-00-4 SBL7700R400 0.350 8.5 50 0 50 4...60 - () 0 0 AF38-30-00-4 SBL9700R400 0.30 48...30 48...30 0 0 AF38-30-00- SBL9700R00 0.30 00...50 00...50 0 0 AF38-30-00-3 SBL9700R300 0.30 50...500 50...500 0 0 AF38-30-00-4 SBL9700R400 0.350 () For 4...60 V 50/60 Hz - 0...60 V DC, use AF..-30-..- (see voltage code table). AF..-30-..- not suitable for direct control by PLC-output. Main dimensions mm, inches 77 3.03" 45.77" 7.80" 45.77" 86 3.39" 80 3.5" 80 3.5" 6 0.4" 35 mm EN/IEC 6075 80 3.5" 6 0.4" 35 mm EN/IEC 6075 AF09, AF, AF6 0 0.39" AF6, AF30, AF38 0 0.39". Motor protection and control
AF09Z... AF38Z 3-pole contactors 5 to 0 hp at 480 V AC AC / DC operated - low consumption AF09Z-30-0 AF6Z-30-00 AF09Z... AF38Z contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 0 V DC. These contactors are of the block type design with 3 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...50 V 50/60 Hz and...50 V DC --can manage large control voltage variations --allow direct control by PLC-output 4 V DC 500 ma --reduced panel energy consumption --very distinct closing and opening --can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code power current θ 40 C motor use Uc min. Uc max. () fitted ( pce) 400 V 480 V 600 V AC AC-3 AC- kw A hp A V 50/60 Hz V DC kg 4 5 5 5 -...0 0 AF09Z-30-0-0 SBL3600R00 0.30 0 AF09Z-30-0-0 SBL3600R00 0.30 4...60 0...60 0 AF09Z-30-0- SBL3600R0 0.30 0 AF09Z-30-0- SBL3600R0 0.30 48...30 48...30 0 AF09Z-30-0- SBL3600R0 0.30 0 AF09Z-30-0- SBL3600R0 0.30 00...50 00...50 0 AF09Z-30-0-3 SBL3600R30 0.30 0 AF09Z-30-0-3 SBL3600R30 0.30 5.5 8 7.5 8 -...0 0 AFZ-30-0-0 SBL5600R00 0.30 0 AFZ-30-0-0 SBL5600R00 0.30 4...60 0...60 0 AFZ-30-0- SBL5600R0 0.30 0 AFZ-30-0- SBL5600R0 0.30 48...30 48...30 0 AFZ-30-0- SBL5600R0 0.30 0 AFZ-30-0- SBL5600R0 0.30 00...50 00...50 0 AFZ-30-0-3 SBL5600R30 0.30 0 AFZ-30-0-3 SBL5600R30 0.30 7.5 30 0 30 -...0 0 AF6Z-30-0-0 SBL7600R00 0.30 0 AF6Z-30-0-0 SBL7600R00 0.30 4...60 0...60 0 AF6Z-30-0- SBL7600R0 0.30 0 AF6Z-30-0- SBL7600R0 0.30 48...30 48...30 0 AF6Z-30-0- SBL7600R0 0.30 0 AF6Z-30-0- SBL7600R0 0.30 00...50 00...50 0 AF6Z-30-0-3 SBL7600R30 0.30 0 AF6Z-30-0-3 SBL7600R30 0.30 45 5 45 -...0 0 0 AF6Z-30-00-0 SBL3600R000 0.350 4...60 0...60 0 0 AF6Z-30-00- SBL3600R00 0.350 48...30 48...30 0 0 AF6Z-30-00- SBL3600R00 0.350 00...50 00...50 0 0 AF6Z-30-00-3 SBL3600R300 0.350 5 50 0 50 -...0 0 0 AF30Z-30-00-0 SBL7600R000 0.350 4...60 0...60 0 0 AF30Z-30-00- SBL7600R00 0.350 48...30 48...30 0 0 AF30Z-30-00- SBL7600R00 0.350 00...50 00...50 0 0 AF30Z-30-00-3 SBL7600R300 0.350 8.5 50 0 50 -...0 0 0 AF38Z-30-00-0 SBL9600R000 0.350 4...60 0...60 0 0 AF38Z-30-00- SBL9600R00 0.350 48...30 48...30 0 0 AF38Z-30-00- SBL9600R00 0.350 00...50 00...50 0 0 AF38Z-30-00-3 SBL9600R300 0.350 () Note: Only AF..Z contactors with DC control voltage...0 V DC need to respect the connection polarities indicated close to the coil terminals: A+ for the positive pole and - for the negative pole. Main dimensions mm, inches 77 3.03" 45.77" 7.80" 45.77" 86 3.39" 80 3.5" 80 3.5" 6 0.4" 35 mm EN/IEC 6075 80 3.5" 6 0.4" 35 mm EN/IEC 6075 AF09Z, AFZ, AF6Z 0 0.39" AF6Z, AF30Z, AF38Z 0 0.39" Motor protection and control.3
AF40... AF96 3-pole contactors 30 to 60 hp at 480 V AC AC / DC operated with N.O. + N.C. auxiliary contacts AF40... AF96 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC and 0 V DC. These contactors are of the block type design with 3 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500 V 50/60 Hz and 0...500 V DC --can manage large control voltage variations --reduced panel energy consumption --very distinct closing and opening. built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. AF40-30- AF80-30- Main dimensions mm, inches IEC UL / CSA Rated control circuit Rated operational 3-phase General voltage power current motor use Uc min. Uc max. θ 40 C 400 V 480 V 600 V AC AC-3 AC- Auxiliary contacts fitted Catalog number Global reference code Weight ( pce) kw A hp A V 50/60 Hz V DC kg 8.5 70 30 60 4...60 - AF40-30--4 SBL34700R4.00 4...60 0...60 () AF40-30-- SBL34700R.00 48...30 48...30 AF40-30-- SBL34700R.00 00...50 00...50 AF40-30--3 SBL34700R3.000 50...500 50...500 AF40-30--4 SBL34700R4.000 00 40 80 4...60 - AF5-30--4 SBL36700R4.00 4...60 0...60 () AF5-30-- SBL36700R.00 48...30 48...30 AF5-30-- SBL36700R.00 00...50 00...50 AF5-30--3 SBL36700R3.000 50...500 50...500 AF5-30--4 SBL36700R4.000 30 05 50 90 4...60 - AF65-30--4 SBL38700R4.00 4...60 0...60 () AF65-30-- SBL38700R.00 48...30 48...30 AF65-30-- SBL38700R.00 00...50 00...50 AF65-30--3 SBL38700R3.000 50...500 50...500 AF65-30--4 SBL38700R4.000 37 5 60 05 4...60 - AF80-30--4 SBL39700R4.60 4...60 0...60 () AF80-30-- SBL39700R.60 48...30 48...30 AF80-30-- SBL39700R.60 00...50 00...50 AF80-30--3 SBL39700R3.0 50...500 50...500 AF80-30--4 SBL39700R4.0 45 30 60 5 4...60 - AF96-30--4 SBL40700R4.60 4...60 0...60 () AF96-30-- SBL40700R.60 48...30 48...30 AF96-30-- SBL40700R.60 00...50 00...50 AF96-30--3 SBL40700R3.0 50...500 50...500 AF96-30--4 SBL40700R4.0 () AF..-30-..- not suitable for direct control by PLC-output. 0.47" 55.7" 7 0.8" 4.37" 0.47" 70.76" 7 0.8" 6 4.57" 6 0.4" 6 0.4" 9.5 4.70" 35 mm EN/IEC 6075 9.5 4.70" 35 x 5 mm EN/IEC 6075 0 0.39" 0 0.39" AF40, AF5, AF65 AF80, AF96.4 Motor protection and control
AF6... AF46 3-pole contactors 75 to 00 hp at 480 V AC AC / DC operated with N.O. + N.C. auxiliary contacts AF46-30- AF46-30-B AF6... AF40 contactors are mainly used for controlling 3-phase motors and power circuits up to 690 V AC, AF46 up to 000 V AC. These contactors are of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500 V 50/60 Hz and 0...500 V DC --can manage large control voltage variations --reduced panel energy consumption --very distinct closing and opening --can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC UL / CSA Rated control Auxiliary Catalog Global reference Weight Rated operational circuit contacts number code power current voltage fitted θ 40 C Uc min.... Uc max. ( pce) 3-phase motor 480 V General use 600 V AC 400 V AC-3 AC- kw A hp A V 50/60 Hz V DC kg For connection with built-in cable clamps 55 60 75 60 4...60 0...60 AF6-30-- SFL4700R.750 48...30 48...30 AF6-30-- SFL4700R.750 00...50 00...50 AF6-30--3 SFL4700R3.750 50...500 50...500 AF6-30--4 SFL4700R4.750 75 00 00 00 4...60 0...60 AF40-30-- SFL44700R.750 48...30 48...30 AF40-30-- SFL44700R.750 00...50 00...50 AF40-30--3 SFL44700R3.750 50...500 50...500 AF40-30--4 SFL44700R4.750 75 5 00 00 4...60 0...60 AF46-30-- SFL46700R.750 48...30 48...30 AF46-30-- SFL46700R.750 00...50 00...50 AF46-30--3 SFL46700R3.750 50...500 50...500 AF46-30--4 SFL46700R4.750 With bar connections 55 60 75 60 4...60 0...60 AF6-30-B- SFL4700R.500 48...30 48...30 AF6-30-B- SFL4700R.500 00...50 00...50 AF6-30-B-3 SFL4700R3.500 50...500 50...500 AF6-30-B-4 SFL4700R4.500 75 00 00 00 4...60 0...60 AF40-30-B- SFL44700R.500 48...30 48...30 AF40-30-B- SFL44700R.500 00...50 00...50 AF40-30-B-3 SFL44700R3.500 50...500 50...500 AF40-30-B-4 SFL44700R4.500 75 5 00 00 4...60 0...60 AF46-30-B- SFL46700R.500 48...30 48...30 AF46-30-B- SFL46700R.500 00...50 00...50 AF46-30-B-3 SFL46700R3.500 50...500 50...500 AF46-30-B-4 SFL46700R4.500 Main dimensions mm, inches 0 0.39" E 90 3.54" SECTION E-E 6 4.96" 0 0.39" E 90 3.54" SECTION E-E 6 4.96" 50 5.9" D D 5 9.5 4.96" 50 5.9" D D 55.5.8" 9.5 0.77" 30.8" AF6, AF40, AF46-30- 30.8" AF6, AF40, AF46-30-B Motor protection and control.5
AF90... AF370 3-pole contactors 5 to 300 hp at 480 V AC AC / DC operated with N.O. + N.C. auxiliary contacts AF05-30- AF370-30- AF90... AF370 contactors are mainly used for controlling 3-phase motors and power circuits up to 000 V AC. These contactors are of the block type design with 3 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500 V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC UL / CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational voltage contacts number code power current Uc min.... Uc max. fitted θ 40 C ( pce) 400 V AC-3 AC- 3-phase motor 480 V General use 600 V AC kw A hp A () V 50/60 Hz V DC kg 90 75 5 30 4...60 0...60 AF90-30-- SFL48700R 3.000 [50] 48...30 48...30 AF90-30-- SFL48700R 3.000 00...50 00...50 AF90-30--3 SFL48700R3 3.000 0 350 50 50 [300] 40 400 00 300 [350] 60 500 50 350 [400] 00 600 300 400 [50] 50...500 50...500 AF90-30--4 SFL48700R4 3.000 4...60 0...60 AF05-30-- SFL5700R 3.000 48...30 48...30 AF05-30-- SFL5700R 3.000 00...50 00...50 AF05-30--3 SFL5700R3 3.000 50...500 50...500 AF05-30--4 SFL5700R4 3.000 4...60 0...60 AF65-30-- SFL54700R 4.640 48...30 48...30 AF65-30-- SFL54700R 4.640 00...50 00...50 AF65-30--3 SFL54700R3 4.640 50...500 50...500 AF65-30--4 SFL54700R4 4.640 4...60 0...60 AF305-30-- SFL58700R 4.640 48...30 48...30 AF305-30-- SFL58700R 4.640 00...50 00...50 AF305-30--3 SFL58700R3 4.640 50...500 50...500 AF305-30--4 SFL58700R4 4.640 4...60 0...60 AF370-30-- SFL60700R 4.640 48...30 48...30 AF370-30-- SFL60700R 4.640 00...50 00...50 AF370-30--3 SFL60700R3 4.640 50...500 50...500 AF370-30--4 SFL60700R4 4.640 () The higher s shown in [brackets] can be achieved through the use of LX.. terminal extensions. Main dimensions mm, inches A B SECTION B-B 5 5.98" 0 0.39" 40 5.5" 9.5 0.77" ø 0.5 0.4" 35.5.40" 80 7.09" 0 0.39" 05 4.3" ø 8.5 0.33" 35.5.40" 96 7.7" 83.5 3.9" 9.5.6" 5 8.86" 94.7 3.73" 33.4.3" 35.38" AF90, AF05 43.75.7" AF65, AF305, AF370.6 Motor protection and control
AF400... AF750 3-pole contactors 350 to 600 hp at 480 V AC AC / DC operated with N.O. + N.C. auxiliary contacts AF460-30- AF750-30- AF400... AF750 contactors are mainly used for controlling 3-phase motors and power circuits up to 000 V AC or 600 V DC (). These contactors are of the block type design with 3 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 4...500 V DC --can manage large control voltage variations --reduced panel energy consumption --very distinct closing and opening --can withstand short voltage dips and voltages sags (SEMI F47 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code power current θ 40 C motor use Uc min.... Uc max. fitted ( pce) 400 V 690 V 480 V 600 V AC AC-3 AC- kw A hp A V 50/60 Hz V DC kg 00 600 350 550-4 60 () AF400-30--68 SFL57700R68.000 48 30 48 30 AF400-30--69 SFL57700R69.000 00 50 00 50 AF400-30--70 SFL57700R70.000 50 500 50 500 AF400-30--7 SFL57700R7.000 50 700 400 650-4 60 () AF460-30--68 SFL59700R68.000 48 30 48 30 AF460-30--69 SFL59700R69.000 00 50 00 50 AF460-30--70 SFL59700R70.000 50 500 50 500 AF460-30--7 SFL59700R7.000 35 800 500 750-4 60 () AF580-30--68 SFL6700R68 5.000 48 30 48 30 AF580-30--69 SFL6700R69 5.000 00 50 00 50 AF580-30--70 SFL6700R70 5.000 50 500 50 500 AF580-30--7 SFL6700R7 5.000 400 050 600 900-4 60 () AF750-30--68 SFL63700R68 5.000 48 30 48 30 AF750-30--69 SFL63700R69 5.000 00 50 00 50 AF750-30--70 SFL63700R70 5.000 50 500 50 500 AF750-30--7 SFL63700R7 5.000 () The connection polarities indicated close to the coil terminals must be respected: A for the positive pole and for the negative pole. () Up to 850 V DC for AF580, AF750. Control inputs AF400... AF750 are equipped with low voltage inputs for control, for example by a PLC. Main dimensions mm, inches 5 0.98" 86 7.3".5 0.89" ø 6.5 0.6" ø 0.5 0.4".5 0.45" 48.5.9" 6 0.4" 6 8.5" ø.5 0.49" 0 8.7" 40.57".5 0.89" ø6.5 0.6".5 0.45" 48.5.9" 6 0.4" 4 9.53" 68 0.55" 78 0.94" 73 0.75" 83.4" 63.48" AF400, AF460 7.83" AF580, AF750 Motor protection and control.7
AF50... AF650 3-pole contactors 800 to 900 hp at 480 V AC and up to 700 A general use AC / DC operated with N.O. + N.C. auxiliary contacts AF50-30- AF650-30- AF50... AF050 contactors are mainly used for controlling power circuits up to 000 V AC or 850 V DC, AF650 for controlling power up to 000 V AC. These contactors are of the block type design with 3 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC) - only 4 coils for AF50 to cover control voltages between 48...500 V 50/60 Hz and 4...500 V DC - only coil for AF350... AF650 to cover control voltages between 00...50 V 50/60 Hz and 00...50 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltages sags (SEMI F47 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code power current θ 40 C motor use Uc () fitted ( pce) 400 V 690 V 480 V 600 V AC AC-3 AC- () kw A hp A V 50/60 Hz V DC kg - 60-0 - 4 60 () AF50-30--68 SFL64700R68 6.000 48 30 48 30 AF50-30--69 SFL64700R69 6.000 00 50 00 50 AF50-30--70 SFL64700R70 6.000 50 500 50 500 AF50-30--7 SFL64700R7 6.000 475 350 800 350 00 50 00 50 AF350-30--70 SFL65700R70 34.000 560 650 900 650 00 50 00 50 AF650-30--70 SFL67700R70 35.000-050 - 00 00 50 00 50 AF050-30--70 SFL70700R70 35.000-650 - 700 00...50 00...50 AF650-30--70 SFL66700R70 45.000 () The connection polarities indicated close to the coil terminals must be respected: A for the positive pole and for the negative pole. () AF650 : Maximum operational voltage = 000 V according to UL / CSA. Control inputs AF50... AF650 are equipped with low voltage inputs for control, for example by a PLC AF350, AF650, AF050 AF650 A 39 mm / 5.43" 4 mm / 6.6" B 47 mm /.85" 53.5 mm /." C 0 mm / 0.39" 5 mm / 0.98" D 3 mm / 0." - Main dimensions mm, inches 40.57" 7.06" 50.97" 7 7.83" ø 7 0.8" 4 9.53" 3 0.5" 7 0.67" 30.8" 0 0.39" AF650N8 36 5.35" 36 5.35" D 344 3.54" 33.3" 63 0.35" 49 9.8" ø7 0.8" 7.83" 0 8.7" 7.83" SFC04F000 46.5 8 0.3" 8.3" SFC05F000 A 80 36 5.35" ø 9 0.35" 3.5" 04 4.09" 438 7.4" 3.3" B C 44 9.6" AF50 AF350, AF650, AF050, AF650.8 Motor protection and control
AF09R... AF30R 3-pole reversing contactors 5 to 0 hp at 480 V AC AC / DC operated AF09R-30- AF09R AF30R reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 690V AC. These devices include two 3-pole contactors, a mechanical and electrical interlock, power bus (see diagram to the left), and are assembled using fixing clips. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF09R-30--3 becomes AF09M-30--3). Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening. Built-in surge suppression Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. 0.39" IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code (3) A power current motor use Uc min. Uc max. fitted A 3 5 3 5 θ 40 C ( pce) 4 6 4 6 400 V 480 V 600 V AC AC-3 AC- kw A hp A V 50/60 Hz V DC kg Power bus diagram 4 5 5 5 4...60 - () AF09R-30--4 0.6 48...30 48...30 AF09R-30-- 0.6 00...50 00...50 AF09R-30--3 0.6 50...500 50...500 AF09R-30--4 0.70 5.5 8 7.5 8 4...60 - () AFR-30--4 0.6 48...30 48...30 AFR-30-- 0.6 00...50 00...50 AFR-30--3 0.6 50...500 50...500 AFR-30--4 0.70 7.5 30 0 30 4...60 - () AF6R-30--4 0.6 48...30 48...30 AF6R-30-- 0.6 00...50 00...50 AF6R-30--3 0.6 50...500 50...500 AF6R-30--4 0.70 45 5 45 4...60 - () 0 AF6R-30-0-4 0.757 AF6R-30--4 0.785 48...30 48...30 0 AF6R-30-0- 0.757 AF6R-30-- 0.785 00...50 00...50 0 AF6R-30-0-3 0.757 AF6R-30--3 0.785 50...500 50...500 0 AF6R-30-0-4 0.837 AF6R-30--4 0.865 5 50 0 50 4...60 - () 0 AF30R-30-0-4 0.757 AF30R-30--4 0.785 48...30 48...30 0 AF30R-30-0- 0.757 AF30R-30-- 0.785 00...50 00...50 0 AF30R-30-0-3 0.757 AF30R-30--3 0.785 50...500 50...500 0 AF30R-30-0-4 0.837 AF30R-30--4 0.865 () For 4...60 V 50/60 Hz - 0...60 V DC, use AF..-30-..- (see voltage code table). AF..-30-..- not suitable for direct control by PLC-output. () Normally closed contacts included as part of the electrical interlock. Normally open auxiliaries are either integral or front-mount. (3) Available in the US and Canada only. Mounting dimensions mm, inches.5 4.39" 90 3.54" 80 3.5" 80 3.5" x 0 0.39" M4 8-3 U 80 3.5" x M4 8-3 U 9.5 3.60" 43.69" 60.36" 35 mm EN/IEC 6075 70.76" 43.69" 60.36" 70.76" ø 4. 0.7" ø 4. 0.7" AF09R, AFR, AF6R AF6R, AF30R Motor protection and control.9
AF09ZR... AF30ZR 3-pole reversing contactors 5 to 0 hp at 480 V AC AC / DC operated - low consumption AF09ZR-30- A 3 5 3 5 4 6 4 6 Power bus diagram A AF09ZR AF30ZR reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 690V AC. These devices include two 3-pole contactors, a mechanical and electrical interlock, power bus (see diagram to the left), and are assembled using fixing clips. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF09ZR-30--3 becomes AF09ZM-30--3). Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage Range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...50 V 50/60 Hz and 0...50 V DC - can manage large control voltage variations - allow direct control by PLC-output 4 V DC 500 ma - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code () power current θ 40 C motor use Uc min. Uc max. fitted () ( pce) 400 V 480 V 600 V AC AC-3 AC- kw A hp A V 50/60 Hz V DC kg 4 5 5 5 4...60 0...60 AF09ZR-30-- 0.70 48...30 48...30 AF09ZR-30-- 0.70 00...50 00...50 AF09ZR-30--3 0.70 5.5 8 7.5 8 4...60 0...60 AFZR-30-- 0.70 48...30 48...30 AFZR-30-- 0.70 00...50 00...50 AFZR-30--3 0.70 7.5 30 0 30 4...60 0...60 AF6ZR-30-- 0.70 48...30 48...30 AF6ZR-30-- 0.70 00...50 00...50 AF6ZR-30--3 0.70 45 5 45 4...60 0...60 0 AF6ZR-30-0- 0.837 AF6ZR-30-- 0.865 48...30 48...30 0 AF6ZR-30-0- 0.837 AF6ZR-30-- 0.865 00...50 00...50 0 AF6ZR-30-0-3 0.837 AF6ZR-30--3 0.865 5 50 0 50 4...60 0...60 0 AF30ZR-30-0- 0.837 AF30ZR-30-- 0.865 48...30 48...30 0 AF30ZR-30-0- 0.837 AF30ZR-30-- 0.865 00...50 00...50 0 AF30ZR-30-0-3 0.837 AF30ZR-30--3 0.865 () Normally closed contacts included as part of the electrical interlock. Normally open auxiliaries are either integral or front-mount. () Available in the US and Canada only. 90 3.54" Mounting dimensions mm,.5 4.39" inches 80 3.5" 80 3.5" 0 x 0.39" M4 8-3 U 80 3.5" x M4 8-3 U 60.36" 35 mm EN/IEC 6075 70.76" 43.69" 60.36" 70.76" ø 4. 0.7" ø 4. 0.7" AF09ZR, AFZR, AF6ZR AF6ZR, AF30ZR.0 Motor protection and control
AF40R... AF96R 3-pole reversing contactors 30 to 60 hp at 480 V AC AC / DC operated AF40M-30- A 3 5 3 5 4 6 4 6 Power bus diagram A AF40R AF96R reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 690V AC. These devices include two 3-pole contactors, a mechanical interlock, side-mounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are assembled using fixing clips. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF40R-30--3 becomes AF40M-30--3). Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening. Built-in surge suppression Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC UL / CSA Rated control circuit Rated operational 3-phase General voltage power current motor use Uc min. Uc max. θ 40 C 400 V 480 V 600 V AC AC-3 AC- Auxiliary contacts fitted Catalog number Global reference code () Weight ( pce) kw A hp A V 50/60 Hz V DC kg 8.5 70 30 60 4...60 - AF40R-30--4.83 4...60 0...60 () AF40R-30--.83 48...30 48...30 AF40R-30--.83 00...50 00...50 AF40R-30--3.63 50...500 50...500 AF40R-30--4.63 00 40 80 4...60 - AF5R-30--4.83 4...60 0...60 () AF5R-30--.83 48...30 48...30 AF5R-30--.83 00...50 00...50 AF5R-30--3.63 50...500 50...500 AF5R-30--4.63 30 05 50 90 4...60 - AF65R-30--4.83 4...60 0...60 () AF65R-30--.83 48...30 48...30 AF65R-30--.83 00...50 00...50 AF65R-30--3.63 50...500 50...500 AF65R-30--4.63 37 5 60 05 4...60 - AF80R-30--4.858 4...60 0...60 () AF80R-30--.858 48...30 48...30 AF80R-30--.858 00...50 00...50 AF80R-30--3.758 50...500 50...500 AF80R-30--4.758 45 30 60 5 4...60 - AF96R-30--4.858 4...60 0...60 () AF96R-30--.858 48...30 48...30 AF96R-30--.858 00...50 00...50 AF96R-30--3.758 50...500 50...500 AF96R-30--4.758 () AF..-30-..- not suitable for direct control by PLC-output. () Available in the US and Canada only. Mounting dimensions mm, inches 00 3.94" M6 ¼-0 U 30 5." M6 ¼-0 U M4 8-3 U 0 4.33" 00 3.94" 0 4.33" 00 3.94" ø 4. 0.7" 4.6 0.8" 4.6 0.8" ø 6.4 0.5" ø 6.4 0.5" AF40R, AF5R, AF65R AF80R, AF96R Motor protection and control.
AF6R... AF40R 3-pole reversing contactors 75 to 00 hp at 480 V AC AC / DC operated AF40R-30- A 3 5 3 5 4 6 4 6 Power bus diagram A AF6R and AF40R reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 690V AC. These devices include two 3-pole contactors, a mechanical interlock, side-mounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are mounted on a backplate. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF6R-30--3 becomes AF6M-30--3). Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC UL / CSA Rated control Rated operational 3-phase General power current motor use θ 40 C 480 V 600 V AC 400 V AC-3 circuit voltage Uc min.... Uc max. Auxiliary contacts fitted Catalog number Global reference code () AC- kw A hp A V 50/60 Hz V DC kg () For connection with built-in cable clamps 55 60 75 60 4...60 0...60 AF6R-30-- 48...30 48...30 AF6R-30-- 00...50 00...50 AF6R-30--3 50 500 50 500 AF6R-30--4 75 00 00 00 4...60 0...60 AF40R-30-- 48...30 48...30 AF40R-30-- 00...50 00...50 AF40R-30--3 50 500 50 500 AF40R-30--4 () Available in the US and Canada only. () Available upon request. Weight ( pce) Mounting dimensions mm, inches (upon request). Motor protection and control
AF90R... AF370R 3-pole reversing contactors 5 to 300 hp at 480 V AC AC / DC operated AF05M-30- AF90R AF370R reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 690V AC. These devices include two 3-pole contactors, a mechanical interlock, side-mounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are mounted on a backplate. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF90R-30--3 becomes AF90M-30--3). Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for side mounting and a wide range of accessories. A 3 5 3 5 4 6 4 6 Power bus diagram A IEC UL / CSA Rated control circuit Rated operational 3-phase General voltage power current motor use Uc min.... Uc max. θ 40 C 400 V 480 V 600 V AC AC-3 AC- Auxiliary contacts fitted Catalog number Global reference code () Weight ( pce) kw A hp A () V 50/60 Hz V DC kg (3) 90 75 5 30 4...60 0...60 AF90R-30-- [50] 48...30 48...30 AF90R-30-- 00...50 00...50 AF90R-30--3 0 350 50 50 [300] 40 400 00 300 [350] 60 500 50 350 [400] 00 600 300 400 [50] 50 500 50 500 AF90R-30--4 4...60 0...60 AF05R-30-- 48...30 48...30 AF05R-30-- 00...50 00...50 AF05R-30--3 50 500 50 500 AF05R-30--4 4...60 0...60 AF65R-30-- 48...30 48...30 AF65R-30-- 00...50 00...50 AF65R-30--3 50 500 50 500 AF65R-30--4 4...60 0...60 AF305R-30-- 48...30 48...30 AF305R-30-- 00...50 00...50 AF305R-30--3 50 500 50 500 AF305R-30--4 4...60 0...60 AF370R-30-- 48...30 48...30 AF370R-30-- 00...50 00...50 AF370R-30--3 50 500 50 500 AF370R-30--4 () The higher s shown in [brackets] can be achieved through the use of LX.. Terminal extensions. Terminal extensions are included as standard for reversing contactors, but must be purchased separately for mechanically and electrically interlocked devices. () Available in the US and Canada only. (3) Available upon request. Mounting dimensions mm, inches (upon request) Motor protection and control.3
AF400R... AF750R 3-pole reversing contactors 350 to 600 hp at 480 V AC AC / DC operated AF460R-30- A 3 5 3 5 4 6 4 6 Power bus diagram A AF400R AF750R reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 690V AC. These devices include two 3-pole contactors, a mechanical interlock, side-mounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are mounted on a backplate. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF400R-30--70 becomes AF400M-30--70). Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage Range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight Rated operational 3-phase General voltage contacts number code () power current θ 40 C motor use Uc min.... Uc max. fitted ( pce) 400 V 480 V 600 V AC AC-3 AC- kw A hp A V 50/60 Hz V DC kg (3) 00 600 350 550-4 60 () AF400R-30--68 48 30 48 30 AF400R-30--69 00 50 00 50 AF400R-30--70 50 500 50 500 AF400R-30--7 50 700 400 650-4 60 () AF460R-30--68 48 30 48 30 AF460R-30--69 00 50 00 50 AF460R-30--70 50 500 50 500 AF460R-30--7 35 800 500 750-4 60 () AF580R-30--68 48 30 48 30 AF580R-30--69 00 50 00 50 AF580R-30--70 50 500 50 500 AF580R-30--7 400 050 600 900-4 60 () AF750R-30--68 48 30 48 30 AF750R-30--69 00 50 00 50 AF750R-30--70 50 500 50 500 AF750R-30--7 () The connection polarities indicated close to the coil terminals must be respected: A for the positive pole and for the negative pole. () Available in the US and Canada only. (3) Available upon request. Control inputs Mounting dimensions mm, inches (upon request).4 Motor protection and control
AF09N00... AF6N 3-pole NEMA rated contactors Sizes 00 to AC / DC operated AF09N00-30-0 AF6N-30-00 AF09N00 AF6N NEMA rated contactors are mainly used for controlling 3-phase motor circuits up to 575V AC. These contactors are of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening. Built-in surge suppression Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. NEMA Size Continuous current 3-phase motor Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted Catalog number Global reference code () Weight ( pce) 30 V 460/ 575V A hp hp V 50/60 Hz V DC kg 00 9.5 5 4...60 - () 0 AF09N00-30-0-4 0.70 0 AF09N00-30-0-4 0.70 48...30 48...30 0 AF09N00-30-0-0.70 0 AF09N00-30-0-0.70 00...50 00...50 0 AF09N00-30-0-3 0.70 0 AF09N00-30-0-3 0.70 50...500 50...500 0 AF09N00-30-0-4 0.30 0 AF09N00-30-0-4 0.30 0 8 3 5 4...60 - () 0 AFN0-30-0-4 0.70 0 AFN0-30-0-4 0.70 48...30 48...30 0 AFN0-30-0-0.70 0 AFN0-30-0-0.70 00...50 00...50 0 AFN0-30-0-3 0.70 0 AFN0-30-0-3 0.70 50...500 50...500 0 AFN0-30-0-4 0.30 0 AFN0-30-0-4 0.30 7 7.5 0 4...60 - () 0 0 AF6N-30-00-4 0.30 48...30 48...30 0 0 AF6N-30-00- 0.30 00...50 00...50 0 0 AF6N-30-00-3 0.30 50...500 50...500 0 0 AF6N-30-00-4 0.350 () For 4...60 V 50/60 Hz - 0...60 V DC, use AF..-30-..- (see voltage code table). AF..-30-..- not suitable for direct control by PLC-output. () Available in the US and Canada only. Main dimensions mm, inches 45.77" 77 3.03" 7.80" 35.38" 45.77" ø 4. 0.7" x M4 8-3 U 86 3.39" 80 3.5" 35.38" ø 4. 0.7" x M4 8-3 U 80 3.5" 6 0.4" 35 mm EN/IEC 6075 60 80.36" 3.5" 6 0.4" 70.76" 35 mm EN/IEC 6075 60.36" 70.76" 0 0.39" 0 0.39" AF09N00, AFN0 AF6N Motor protection and control.5
AF09N00Z... AF6NZ 3-pole NEMA rated contactors Sizes 00 to AC / DC operated - low consumption AF09N00Z-30-0 AF6NZ-30-00 AF09N00 AF6N NEMA rated contactors are mainly used for controlling 3-phase motor circuits up to 575V AC. These contactors are of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening. Built-in surge suppression Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. NEMA Size Continuous current 3-phase motor Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted Catalog number Global reference code () Weight ( pce) 30 V 460/ 575V A hp hp V 50/60 Hz V DC kg 0 9.5 5-0 () 0 AF09N00Z-30-0-0 0.30 0 AF09N00Z-30-0-0 0.30 4 60 0 60 0 AF09N00Z-30-0- 0.30 0 AF09N00Z-30-0- 0.30 48 30 48 30 0 AF09N00Z-30-0- 0.30 0 AF09N00Z-30-0- 0.30 00 50 00 50 0 AF09N00Z-30-0-3 0.30 0 AF09N00Z-30-0-3 0.30 0 8 3 5-0 () 0 AFN0Z-30-0-0 0.30 0 AFN0Z-30-0-0 0.30 4 60 0 60 0 AFN0Z-30-0- 0.30 0 AFN0Z-30-0- 0.30 48 30 48 30 0 AFN0Z-30-0- 0.30 0 AFN0Z-30-0- 0.30 00 50 00 50 0 AFN0Z-30-0-3 0.30 0 AFN0Z-30-0-3 0.30 7 7.5 0-0 () 0 0 AF6NZ-30-00-0 0.350 4 60 0 60 0 0 AF6NZ-30-00- 0.350 48 30 48 30 0 0 AF6NZ-30-00- 0.350 00 50 00 50 0 0 AF6NZ-30-00-3 0.350 () Only AF..Z contactors with DC control voltage...0 V DC need to respect the connection polarities indicated close to the coil terminals: A+ for the positive pole and - for the negative pole. () Available in the US and Canada only. Main dimensions mm, inches 45.77" 77 3.03" 7.80" 35.38" 45.77" ø 4. 0.7" x M4 8-3 U 86 3.39" 80 3.5" 35.38" ø 4. 0.7" x M4 8-3 U 80 3.5" 6 0.4" 35 mm EN/IEC 6075 60 80.36" 3.5" 6 0.4" 70.76" 35 mm EN/IEC 6075 60.36" 70.76" AF09N00Z, AFN0Z 0 0.39" AF6NZ 0 0.39".6 Motor protection and control
AF40N & AF80N3 3-pole NEMA rated contactors Sizes & 3 AC / DC operated with N.O. + N.C. auxiliary contacts AF40N and AF80N3 NEMA rated contactors are mainly used for controlling 3-phase motor circuits up to 575V AC. These contactors are of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening. Built-in surge suppression Add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. AF40N-30- AF80N3-30- NEMA Size Continuous current 3-phase motor Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted Catalog number Global reference code () 30 V 460/ 575V A hp hp V 50/60 Hz V DC kg 45 5 5 4 60 - AF40N-30--4.00 4 60 0 60 () AF40N-30--.00 48 30 48 30 AF40N-30--.00 00 50 00 50 AF40N-30--3.000 50 500 50 500 AF40N-30--4.000 3 90 30 50 4 60 - AF80N3-30--4.60 4 60 0 60 () AF80N3-30--.60 48 30 48 30 AF80N3-30--.60 00 50 00 50 AF80N3-30--3.0 50 500 50 500 AF80N3-30--4.0 () AF..-30-..- not suitable for direct control by PLC-output. () Available in the US and Canada only. Weight ( pce) Main dimensions mm, inches 0.47" 55.7" 7 0.8" 4.37" 0.47" 70.76" 7 0.8" 6 4.57" 6 0.4" 6 0.4" 9.5 4.70" 35 mm EN/IEC 6075 9.5 4.70" 35 x 5 mm EN/IEC 6075 0 0.39" 0 0.39" AF40N AF80N3 Motor protection and control.7
AF40N4 & AF65N5 3-pole NEMA rated contactors Sizes 4 & 5 AC / DC operated with N.O. + N.C. auxiliary contacts AF40N4-30- AF40N4-30-B AF40N4 and AF65N5 NEMA rated contactors are mainly used for controlling 3-phase motor circuits up to 575V AC. These contactors are of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for side mounting and a wide range of accessories. NEMA Size Continuous current 3-phase motor Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted Catalog number Global reference code () 30 V 460/ 575V A hp hp V 50/60 Hz V DC kg For connection with built-in cable clamps 4 35 50 00 4 60 0 60 AF40N4-30--.750 48 30 48 30 AF40N4-30--.750 00 50 00 50 AF40N4-30--3.750 50 500 50 500 AF40N4-30--4.750 With bar connections 4 35 50 00 4 60 0 60 AF40N4-30-B-.500 48 30 48 30 AF40N4-30-B-.500 00 50 00 50 AF40N4-30-B-3.500 50 500 50 500 AF40N4-30-B-4.500 5 70 00 00 4 60 0 60 AF65N5-30-- 4.640 48 30 48 30 AF65N5-30-- 4.640 00 50 00 50 AF65N5-30--3 4.640 50 500 50 500 AF65N5-30--4 4.640 () Available in the US and Canada only. Weight ( pce) AF65N5-30- Main dimensions mm, inches E A SECTION E-E 0 0.39" 90 3.54" 0 0.39" 40 5.5" 6 4.96" 9.5 0.77" ø 0.5 0.4" 35.5.40" 80 7.09" 50 5.9" D D 5 9.5 4.96" 5 8.86" 94.7 3.73" 33.4.3" 30.8" 43.75.7" AF40N4 AF65N5.8 Motor protection and control
AF460N6 & AF750N7 3-pole NEMA rated contactors Sizes 6 & 7 AC / DC operated with N.O. + N.C. auxiliary contacts AF460N6-30- AF750N7-30- AF460N6 and AF750N7 NEMA rated contactors are mainly used for controlling 3-phase motor circuits up to 575V AC. These contactors are of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 4...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for side mounting and a wide range of accessories. NEMA Rated control circuit Auxiliary Catalog Global reference Weight 3-phase motor voltage contacts number code () Size Uc min. Uc max. fitted Continuous current ( pce) 30 V 460/ 575V A hp hp V 50/60 Hz V DC kg 6 540 00 400-4 60 () AF460N6-30-68.000 48 30 48 30 AF460N6-30-69.000 00 50 00 50 AF460N6-30-70.000 50 500 50 500 AF460N6-30-7.000 7 80 300 600-4 60 () AF750N7-30-68 5.000 48 30 48 30 AF750N7-30-69 5.000 00 50 00 50 AF750N7-30-70 5.000 50 500 50 500 AF750N7-30-7 5.000 () The connection polarities indicated close to the coil terminals must be respected: A for the positive pole and for the negative. () Available in the US and Canada only. Control inputs Main dimensions mm, inches 5 0.98" 86 7.3".5 0.89" ø 6.5 0.6" ø 0.5 0.4".5 0.45" 48.5.9" 6 0.4" 6 8.5" ø.5 0.49" 0 8.7" 40.57".5 0.89" ø6.5 0.6".5 0.45" 48.5.9" 6 0.4" 4 9.53" 68 0.55" 78 0.94" 73 0.75" 83.4" 63.48" 7.83" AF460N6 AF750N7 Motor protection and control.9
AF650N8 3-pole NEMA rated contactor Size 8 AC / DC operated with N.O. + N.C. auxiliary contacts AF650N8 NEMA rated contactor is mainly used for controlling 3-phase motor circuits up to 575V AC. This contactor is of the block type design with 3 main poles. Control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range, only coil to cover control voltages between between 00...50 V 50/60 Hz and 00...50 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). Built-in surge suppression Add-on auxiliary contact blocks for side mounting and a wide range of accessories. AF650N8-30- NEMA Size Continuous current 3-phase motor Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted Catalog number Global reference code () Weight ( pce) 30 V 460/ 575V A hp hp V 50/60 Hz V DC kg 8 5 450 900 00 50 00 50 AF650N830-70 35.000 () Available in the US and Canada only. Control inputs AF650N8 A 39 mm / 5.43" B 47 mm /.85" C 0 mm / 0.39" D 3 mm / 0." Main dimensions mm, inches 3 0.5" 40.57" 7.06" 7 0.67" 30.8" 0 0.39" AF650N8 36 5.35" 36 5.35" D A 3.3" 80 36 5.35" ø 9 0.35" 3.5" 04 4.09" 438 7.4" B C 44 9.6" AF650N8.0 Motor protection and control
AF09N00R... AF6NR 3-pole NEMA rated reversing contactors Sizes 00 to AC / DC operated AF09N00R-30 A 3 5 3 5 4 6 4 6 Power bus diagram A AF09N00R AF6NR NEMA rated reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 575V AC. These devices include two 3-pole contactors, a mechanical and electrical interlock, power bus (see diagram to the left), and are assembled using fixing clips. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF09N00R-30-3 becomes AF09N00M-30-3). control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories NEMA Size Continuous 3-phase motor current Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted () Catalog number Global reference code (3) Weight ( pce) 30V 460/575 A hp hp V 50/60 Hz V DC kg 00 9.5 4...60 - () AF09N00R-30-4 0.6 48...30 48...30 AF09N00R-30-0.6 00...50 00...50 AF09N00R-30-3 0.6 50...500 50...500 AF09N00R-30-4 0.70 0 8 3 5 4...60 - () AFN0R-30-4 0.6 48...30 48...30 AFN0R-30-0.6 00...50 00...50 AFN0R-30-3 0.6 50...500 50...500 AFN0R-30-4 0.70 7 7.5 0 4...60 - () 0 AF6NR-300-4 0.757 AF6NR-30-4 0.785 48...30 48...30 0 AF6NR-300-0.757 AF6NR-30-0.785 00...50 00...50 0 AF6NR-300-3 0.757 AF6NR-30-3 0.785 50...500 50...500 0 AF6NR-300-4 0.837 AF6NR-30-4 0.865 () For 4...60 V 50/60 Hz - 0...60 V DC, use AF..-30-..- (see voltage code table). AF..-30-..- not suitable for direct control by PLC-output. () Normally closed contacts included as part of the electrical interlock. Normally open auxiliaries are either integral or front-mount. (3) Available in the US and Canada only. 9" 90 3.54" Mounting dimensions mm,.5 inches 4.39" 80 3.5" 80 3.5" x 0 0.39" M4 8-3 U 80 3.5" x M4 8-3 U 43.69" 60.36" 35 mm EN/IEC 6075 70.76" 43.69" 60.36" 70.76" ø 4. 0.7" ø 4. 0.7" AF09N00R, AFN0R AF6NR Motor protection and control.
AF09N00ZR... AF6NZR 3-pole NEMA rated reversing contactors Sizes 00 to AC / DC operated - low consumption AF09N00ZR-30- A 3 5 3 5 4 6 4 6 Power bus diagram A AF09N00ZR AF6NZR NEMA rated reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 575V AC. These devices include two 3-pole contactors, a mechanical and electrical interlock, power bus (see diagram to the left), and are assembled using fixing clips. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF09N00ZR-30-3 becomes AF09N00ZM-30-3). control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...50 V 50/60 Hz and 0...50 V DC - can manage large control voltage variations - allow direct control by PLC-output 4 V DC 500 ma - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request) built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories NEMA Rated control circuit Auxiliary Catalog Global reference Weight Size Continuous 3-phase motor voltage contacts number code (3) current Uc min. Uc max. fitted () ( pce) 30V 460/575 A hp hp V 50/60 Hz V DC kg 00 9.5 4...60 0...60 AF09N00ZR-30-0.70 48...30 48...30 AF09N00ZR-30-0.70 00...50 00...50 AF09N00ZR-30-3 0.70 0 8 3 5 4...60 0...60 AFN0ZR-30-0.70 48...30 48...30 AFN0ZR-30-0.70 00...50 00...50 AFN0ZR-30-3 0.70 7 7.5 0 4...60 0...60 0 AF6NZR-300-0.837 AF6NZR-30-0.865 48...30 48...30 0 AF6NZR-300-0.837 AF6NZR-30-0.865 00...50 00...50 0 AF6NZR-300-3 0.837 AF6NZR-30-3 0.865 () Normally closed contacts included as part of the electrical interlock. Normally open auxiliaries are either integral or front-mount. () Available in the US and Canada only. 90 3.54" Mounting dimensions mm,.5 inches 4.39" 80 3.5" 80 3.5" 0 x 0.39" M4 8-3 U 80 3.5" x M4 8-3 U 60.36" 35 mm EN/IEC 6075 70.76" 43.69" 60.36" 70.76" ø 4. 0.7" ø 4. 0.7" AF09N00ZR, AFN0ZR AF6NZR. Motor protection and control
AF40NR & AF80N3R 3-pole NEMA rated reversing contactors Sizes & 3 AC / DC operated AF40NM-30 A 3 5 3 5 4 6 4 6 Power bus diagram A AF40NR and AF80NR3 NEMA rated reversing contactors are mainly used for directionally controlling 3-phase motor circuits up to 575V AC. These devices include two 3-pole contactors, a mechanical interlock, sidemounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are assembled using fixing clips. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF40NR-30--3 becomes AF40NM-30--3). control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories NEMA Size Continuous 3-phase motor current Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted () Catalog number Global reference code (3) Weight ( pce) 30V 460/575 A hp hp V 50/60 Hz V DC kg 45 5 5 4 60 - AF40NR-30-4.83 4 60 0 60 () AF40NR-30-.83 48 30 48 30 AF40NR-30-.83 00 50 00 50 AF40NR-30-3.63 50 500 50 500 AF40NR-30-4.63 3 90 30 50 4 60 - AF80N3R-30-4.858 4 60 0 60 () AF80N3R-30-.858 48 30 48 30 AF80N3R-30-.858 00 50 00 50 AF80N3R-30-3.758 50 500 50 500 AF80N3R-30-4.758 () AF..-30-..- not suitable for direct control by PLC-output. () Normally closed contacts included as part of the electrical interlock. Normally open auxiliaries are either integral or front-mount. (3) Available in the US and Canada only. Mounting dimensions mm, inches 00 3.94" M6 ¼-0 U 30 5." M6 ¼-0 U M4 8-3 U 0 4.33" 00 3.94" 0 4.33" 00 3.94" ø 4. 0.7" 4.6 0.8" 4.6 0.8" ø 6.4 0.5" ø 6.4 0.5" AF40NR AF80N3R Motor protection and control.3
AF40N4R & AF65N5R 3-pole NEMA rated reversing contactors Sizes 4 & 5 AC / DC operated AF40N4R-30- AF40N4 and AF65N5 NEMA rated contactors are mainly used for directionally controlling 3-phase motor circuits up to 575V AC. These devices include two 3-pole contactors, a mechanical interlock, side-mounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are mounted on a backplate. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF40N4R-30--3 becomes AF40N4M-30--3). control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500V 50/60 Hz and 0...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories A 3 5 3 5 4 6 4 6 Power bus diagram A NEMA Size Continuous 3-phase motor current Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted () Catalog number Global reference code () 30V 460/575 A hp hp V 50/60 Hz V DC kg () 4 35 50 00 4 60 0 60 AF40N4R-30-48 30 48 30 AF40N4R-30-00 50 00 50 AF40N4R-30-3 50 500 50 500 AF40N4R-30-4 5 70 00 00 4 60 0 60 AF65N5R-30-48 30 48 30 AF65N5R-30-00 50 00 50 AF65N5R-30-3 50 500 50 500 AF65N5R-30-4 () Available in the US and Canada only. () Available upon request. Weight ( pce) Mounting dimensions mm, inches (upon request).4 Motor protection and control
AF460N6 & AF750N7 3-pole NEMA rated reversing contactors Sizes 6 & 7 AC / DC operated AF460N6R- A 3 5 3 5 4 6 4 6 Power bus diagram A AF460N6 and AF750N7 NEMA rated contactors are mainly used for directionally controlling 3-phase motor circuits up to 575V AC. These devices include two 3-pole contactors, a mechanical interlock, side-mounted auxiliary contacts for electrical interlocking, power bus (see diagram to the left), and are mounted on a backplate. Note: for mechanically and electrically interlocked devices without power bus, replace the R in the catalog number with an M (ie. AF460N6R--70 becomes AF460N6M--70). control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 coils to cover control voltages between 48...500 V 50/60 Hz and 4...500 V DC - can manage large control voltage variations - reduced panel energy consumption - very distinct closing and opening - can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request) built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories NEMA Size Continuous current 3-phase motor Rated control circuit voltage Uc min. Uc max. Auxiliary contacts fitted () Catalog number Global reference code () 30V 460/575 A hp hp V 50/60 Hz V DC kg (3) 6 540 00 400-4 60 () AF460N6R--68 48 30 48 30 AF460N6R--69 00 50 00 50 AF460N6R--70 50 500 50 500 AF460N6R--7 7 80 300 600-4 60 () AF750N7R--68 48 30 48 30 AF750N7R--69 00 50 00 50 AF750N7R--70 50 500 50 500 AF750N7R--7 () The connection polarities indicated close to the coil terminals must be respected: A for the positive pole and for the negative. () Available in the US and Canada only. () Available upon request. Weight ( pce) Control inputs Mounting dimensions mm, inches (upon request) Motor protection and control.5
AF09... AF38 4-pole contactors 5 to 55 A general use AC / DC operated AF09-40-00 AF6-40-00 AF09... AF38 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC and 440 V DC. These contactors are of the block type design with 4 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...500 V 50/60 Hz and 0...500 V DC --can manage large control voltage variations --reduced panel energy consumption --very distinct closing and opening built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories IEC UL/CSA Rated control circuit voltage Uc min. Uc max. Rated operational current θ 40 C AC- General use 600 V AC Auxiliary contacts fitted Catalog number Global reference code A A V 50/60 Hz V DC kg Weight ( pce) 4 N.O. main poles 5 5 4...60 - () 0 0 AF09-40-00-4 SBL370R400 0.70 48...30 48...30 0 0 AF09-40-00- SBL370R00 0.70 00...50 00...50 0 0 AF09-40-00-3 SBL370R300 0.70 50...500 50...500 0 0 AF09-40-00-4 SBL370R400 0.30 30 30 4...60 - () 0 0 AF6-40-00-4 SBL770R400 0.70 48...30 48...30 0 0 AF6-40-00- SBL770R00 0.70 00...50 00...50 0 0 AF6-40-00-3 SBL770R300 0.70 50...500 50...500 0 0 AF6-40-00-4 SBL770R400 0.30 45 45 4...60 - () 0 0 AF6-40-00-4 SBL370R400 0.360 48...30 48...30 0 0 AF6-40-00- SBL370R00 0.360 00...50 00...50 0 0 AF6-40-00-3 SBL370R300 0.360 50...500 50...500 0 0 AF6-40-00-4 SBL370R400 0.400 55 55 4...60 - () 0 0 AF38-40-00-4 SBL970R400 0.360 48...30 48...30 0 0 AF38-40-00- SBL970R00 0.360 00...50 00...50 0 0 AF38-40-00-3 SBL970R300 0.360 50...500 50...500 0 0 AF38-40-00-4 SBL970R400 0.400 N.O. + N.C. main poles 5 5 4...60 - () 0 0 AF09--00-4 SBL3750R400 0.70 48...30 48...30 0 0 AF09--00- SBL3750R00 0.70 00...50 00...50 0 0 AF09--00-3 SBL3750R300 0.70 50...500 50...500 0 0 AF09--00-4 SBL3750R400 0.30 30 30 4...60 - () 0 0 AF6--00-4 SBL7750R400 0.70 48...30 48...30 0 0 AF6--00- SBL7750R00 0.70 00...50 00...50 0 0 AF6--00-3 SBL7750R300 0.70 50...500 50...500 0 0 AF6--00-4 SBL7750R400 0.30 45 45 4...60 - () 0 0 AF6--00-4 SBL3750R400 0.360 48...30 48...30 0 0 AF6--00- SBL3750R00 0.360 00...50 00...50 0 0 AF6--00-3 SBL3750R300 0.360 50...500 50...500 0 0 AF6--00-4 SBL3750R400 0.400 55 55 4...60 - () 0 0 AF38--00-4 SBL9750R400 0.360 48...30 48...30 0 0 AF38--00- SBL9750R00 0.360 00...50 00...50 0 0 AF38--00-3 SBL9750R300 0.360 50...500 50...500 0 0 AF38--00-4 SBL9750R400 0.400 () For 4...60 V 50/60 Hz - 0...60 V DC, use AF..-..-..- (see voltage code table). AF..-..-..- not suitable for direct control by PLC-output. Main dimensions mm, inches 45.77" 77 3.03" 7.80" 35.38" 45.77" ø 4. 0.7" 0 3.98" x 95 3.74" M4 8-3 U 35.38" ø 4. 0.7" x M4 8-3 U 80 3.5" 6 0.4" 35 mm EN/IEC 6075 80 3.5" 6 0.4" 60.36" 70.76" 35 mm EN/IEC 6075 60.36" 70.76" AF09, AF6 0 0.39" AF6, AF38 0 0.39".6 Motor protection and control
AF09Z... AF38Z 4-pole contactors 5 to 55 A general use AC / DC operated - low consumption AF09Z-40-00 AF6Z-40-00 Main dimensions mm, inches 77 3.03" 45.77" 7.80" AF09Z... AF38Z 4-pole contactors are mainly used for controlling non-inductive or slightly inductive loads (i.e. resistance furnaces...) and generally for controlling power circuits up to 690 V AC and 440 V DC. These contactors are of the block type design with 4 main poles. control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC), only 4 control voltage ranges covering 4...50 V 50/60 Hz and...50 V DC --can manage large control voltage variations --allow direct control by PLC-output 4 V DC 500 ma --reduced panel energy consumption --very distinct closing and opening --can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. IEC UL/CSA Rated control circuit Auxiliary Catalog Global reference Weight voltage contacts number code Uc min. Uc max. fitted Rated operational current θ 40 C AC- General use 600 V AC A A V 50/60 Hz V DC kg ( pce) 4 N.O. main poles 5 5 -...0 0 0 AF09Z-40-00-0 SBL360R000 0.30 4...60 0...60 0 0 AF09Z-40-00- SBL360R00 0.30 48...30 48...30 0 0 AF09Z-40-00- SBL360R00 0.30 00...50 00...50 0 0 AF09Z-40-00-3 SBL360R300 0.30 30 30 -...0 0 0 AF6Z-40-00-0 SBL760R000 0.30 4...60 0...60 0 0 AF6Z-40-00- SBL760R00 0.30 48...30 48...30 0 0 AF6Z-40-00- SBL760R00 0.30 00...50 00...50 0 0 AF6Z-40-00-3 SBL760R300 0.30 45 45 -...0 0 0 AF6Z-40-00-0 SBL360R000 0.400 4...60 0...60 0 0 AF6Z-40-00- SBL360R00 0.400 48...30 48...30 0 0 AF6Z-40-00- SBL360R00 0.400 00...50 00...50 0 0 AF6Z-40-00-3 SBL360R300 0.400 55 55 -...0 0 0 AF38Z-40-00-0 SBL960R000 0.400 4...60 0...60 0 0 AF38Z-40-00- SBL960R00 0.400 48...30 48...30 0 0 AF38Z-40-00- SBL960R00 0.400 00...50 00...50 0 0 AF38Z-40-00-3 SBL960R300 0.400 N.O. + N.C. main poles 5 5 -...0 0 0 AF09Z--00-0 SBL3650R000 0.30 4...60 0...60 0 0 AF09Z--00- SBL3650R00 0.30 48...30 48...30 0 0 AF09Z--00- SBL3650R00 0.30 00...50 00...50 0 0 AF09Z--00-3 SBL3650R300 0.30 30 30 -...0 0 0 AF6Z--00-0 SBL7650R000 0.30 4...60 0...60 0 0 AF6Z--00- SBL7650R00 0.30 48...30 48...30 0 0 AF6Z--00- SBL7650R00 0.30 00...50 00...50 0 0 AF6Z--00-3 SBL7650R300 0.30 45 45 -...0 0 0 AF6Z--00-0 SBL3650R000 0.400 4...60 0...60 0 0 AF6Z--00- SBL3650R00 0.400 48...30 48...30 0 0 AF6Z--00- SBL3650R00 0.400 00...50 00...50 0 0 AF6Z--00-3 SBL3650R300 0.400 55 55 -...0 0 0 AF38Z--00-0 SBL9650R000 0.400 4...60 0...60 0 0 AF38Z--00- SBL9650R00 0.400 48...30 48...30 0 0 AF38Z--00- SBL9650R00 0.400 00...50 00...50 0 0 AF38Z--00-3 SBL9650R300 0.400 Note: Only AF..Z contactors with DC control voltage...0 V DC need to respect the connection polarities indicated close to the coil terminals: A+ for the positive pole and - for the negative pole. 35.38" 45.77" ø 4. 0.7" 0 3.98" x 95 3.74" M4 8-3 U 35.38" ø 4. 0.7" x M4 8-3 U 80 3.5" 6 0.4" 35 mm EN/IEC 6075 80 3.5" 6 0.4" 60.36" 70.76" 35 mm EN/IEC 6075 60.36" 70.76" AF09Z, AF6Z 0 0.39" AF6Z, AF38Z 0 0.39" Motor protection and control.7
NF 4-pole control relays Pilot duty rated A600 / Q600 AC / DC operated NFE NF control relays are used for switching auxiliary and control circuits. These control relays are of the block type design with: 4 poles. Control relays have mechanically linked auxiliary contact elements (side-marked symbol) control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC) --can manage large control voltage variations --only 4 control voltage ranges covering 4...500 V 50/60 Hz and 0...500 V DC --reduced panel energy consumption --very distinct closing and opening built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories Number of contacts Rated control circuit voltage Uc min.... Uc max. Catalog number Global reference code Weight ( pce) A A A 3 4 3 4 3 4 3 4 3 3 33 34 33 34 43 44 43 44 43 44 V 50/60 Hz V DC kg 4...60 - () NFE-4 SBH3700R4 0.70 48...30 48...30 NFE- SBH3700R 0.70 00...50 00...50 NFE-3 SBH3700R3 0.70 50...500 50...500 NFE-4 SBH3700R4 0.30 4...60 - () NF3E-4 SBH3700R43 0.70 48...30 48...30 NF3E- SBH3700R3 0.70 00...50 00...50 NF3E-3 SBH3700R33 0.70 50...500 50...500 NF3E-4 SBH3700R43 0.30 4...60 - () NF40E-4 SBH3700R440 0.70 48...30 48...30 NF40E- SBH3700R40 0.70 00...50 00...50 NF40E-3 SBH3700R340 0.70 50...500 50...500 NF40E-4 SBH3700R440 0.30 () For 4...60 V 50/60 Hz - 0...60 V DC, use NF..E- (see voltage code table). NF..E- not suitable for direct control by PLC-output. Main dimensions mm, inches 45.77" 77 3.03" 7.80" 80 3.5" 6 0.4" 35 mm EN/IEC 6075 0 0.39" NFE, NF3E, NF40E.8 Motor protection and control
NFZ 4-pole control relays Pilot duty rated A600 / Q600 AC / DC operated - low consumption NFZE NFZ control relays are used for switching auxiliary and control circuits. These control relays are of the block type design with: 4 poles. Control relays have mechanically linked auxiliary contact elements (side-marked symbol) control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC) --can manage large control voltage variations --only 4 control voltage ranges covering 4...50 V 50/60 Hz and...50 V DC --allow direct control by PLC-output 4 V DC 500 ma --reduced panel energy consumption --very distinct closing and opening --can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request). built-in surge suppression add-on auxiliary contact blocks for front or side mounting and a wide range of accessories. Number of contacts Rated control circuit voltage Uc min.... Uc max. Catalog number Global reference code Weight ( pce) A A A 3 4 3 4 3 4 3 4 3 3 33 34 33 34 43 44 43 44 43 44 V 50/60 Hz V DC kg...0 NFZE-0 SBH3600R0 0.30 4...60 0...60 NFZE- SBH3600R 0.30 48...30 48...30 NFZE- SBH3600R 0.30 00...50 00...50 NFZE-3 SBH3600R3 0.30...0 NFZ3E-0 SBH3600R03 0.30 4...60 0...60 NFZ3E- SBH3600R3 0.30 48...30 48...30 NFZ3E- SBH3600R3 0.30 00...50 00...50 NFZ3E-3 SBH3600R33 0.30...0 NFZ40E-0 SBH3600R040 0.30 4...60 0...60 NFZ40E- SBH3600R40 0.30 48...30 48...30 NFZ40E- SBH3600R40 0.30 00...50 00...50 NFZ40E-3 SBH3600R340 0.30 Note: Only NFZ contactor relays with DC control voltage...0 V DC need to respect the connection polarities indicated close to the coil terminals: A+ for the positive pole and - for the negative pole. Main dimensions mm, inches 45.77" 77 3.03" 7.80" 80 3.5" 6 0.4" 35 mm EN/IEC 6075 0 0.39" NFZE, NFZ3E, NFZ40E Motor protection and control.9
NF 8-pole control relays Pilot duty rated A600 / Q600 AC / DC operated NF44E NF control relays are used for switching auxiliary and control circuits. These control relays are of the block type design with: 8 poles with a permanently fixed 4-pole auxiliary contact block. Control relays have mechanically linked auxiliary contact elements (side-marked symbol) control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC) --can manage large control voltage variations --only 4 control voltage ranges covering 4...500 V 50/60 Hz and 0...500 V DC --reduced panel energy consumption --very distinct closing and opening built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories Number of contacts st stack nd stack Rated control circuit voltage Uc min.... Uc max. Catalog number Global reference code Weight ( pce) A A A A A 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 33 34 33 34 33 34 33 34 33 34 43 44 43 44 43 44 43 44 43 44 5 5 53 54 53 54 53 54 53 54 6 6 6 6 6 6 6 6 63 64 7 7 7 7 7 7 73 74 73 74 8 8 8 8 83 84 83 84 83 84 V 50/60 Hz V DC kg 4...60 - () NF44E-4 SBH3700R444 0.30 48...30 48...30 NF44E- SBH3700R44 0.30 00...50 00...50 NF44E-3 SBH3700R344 0.30 50...500 50...500 NF44E-4 SBH3700R444 0.360 4...60 - () NF53E-4 SBH3700R453 0.30 48...30 48...30 NF53E- SBH3700R53 0.30 00...50 00...50 NF53E-3 SBH3700R353 0.30 50...500 50...500 NF53E-4 SBH3700R453 0.360 4...60 - () NF6E-4 SBH3700R46 0.30 48...30 48...30 NF6E- SBH3700R6 0.30 00...50 00...50 NF6E-3 SBH3700R36 0.30 50...500 50...500 NF6E-4 SBH3700R46 0.360 4...60 - () NF7E-4 SBH3700R47 0.30 48...30 48...30 NF7E- SBH3700R7 0.30 00...50 00...50 NF7E-3 SBH3700R37 0.30 50...500 50...500 NF7E-4 SBH3700R47 0.360 4...60 - () NF80E-4 SBH3700R480 0.30 48...30 48...30 NF80E- SBH3700R80 0.30 00...50 00...50 NF80E-3 SBH3700R380 0.30 50...500 50...500 NF80E-4 SBH3700R480 0.360 () For 4...60 V 50/60 Hz - 0...60 V DC, use NF..E- (see voltage code table). NF..E- not suitable for direct control by PLC-output. Main dimensions mm, inches 45.77" 0.5 4.35" 7.80" 0 0.39" 80 3.5" 6 0.4" 35 mm EN/IEC 6075 43.69" NF44E, NF53E, NF6E, NF7E, NF80E.30 Motor protection and control
NFZ 8-pole control relays Pilot duty rated A600 / Q600 AC / DC operated Low consumption NFZ44E NFZ control relays are used for switching auxiliary and control circuits. These control relays are of the block type design with: 8 poles with a permanently fixed 4-pole auxiliary contact block. Control relays have mechanically linked auxiliary contact elements (side-marked symbol) control circuit: AC or DC operated with electronic coil interface accepting a wide control voltage range (e.g. 00...50 V AC and DC) --can manage large control voltage variations --only 4 control voltage ranges covering 4...50 V 50/60 Hz and...50 V DC --allow direct control by PLC-output 4 VDC 500 ma --reduced panel energy consumption --very distinct closing and opening --can withstand short voltage dips and voltage sags (SEMI F47-0706 conditions of use on request) built-in surge suppression add-on auxiliary contact blocks for side mounting and a wide range of accessories Number of contacts Rated control circuit Catalog Global reference Weight voltage number code st stack nd stack Uc min.... Uc max. ( pce) A A A A A 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 3 4 33 34 33 34 33 34 33 34 33 34 43 44 43 44 43 44 43 44 43 44 5 5 53 54 53 54 53 54 53 54 6 6 6 6 6 6 6 6 63 64 7 7 7 7 7 7 73 74 73 74 8 8 8 8 83 84 83 84 83 84 V 50/60 Hz V DC kg...0 NFZ44E-0 SBH3600R044 0.360 4...60 0...60 NFZ44E- SBH3600R44 0.360 48...30 48...30 NFZ44E- SBH3600R44 0.360 00...50 00...50 NFZ44E-3 SBH3600R344 0.360...0 NFZ53E-0 SBH3600R053 0.360 4...60 0...60 NFZ53E- SBH3600R53 0.360 48...30 48...30 NFZ53E- SBH3600R53 0.360 00...50 00...50 NFZ53E-3 SBH3600R353 0.360...0 NFZ6E-0 SBH3600R06 0.360 4...60 0...60 NFZ6E- SBH3600R6 0.360 48...30 48...30 NFZ6E- SBH3600R6 0.360 00...50 00...50 NFZ6E-3 SBH3600R36 0.360...0 NFZ7E-0 SBH3600R07 0.360 4...60 0...60 NFZ7E- SBH3600R7 0.360 48...30 48...30 NFZ7E- SBH3600R7 0.360 00...50 00...50 NFZ7E-3 SBH3600R37 0.360...0 NFZ80E-0 SBH3600R080 0.360 4...60 0...60 NFZ80E- SBH3600R80 0.360 48...30 48...30 NFZ80E- SBH3600R80 0.360 00...50 00...50 NFZ80E-3 SBH3600R380 0.360 Note: Only NFZ contactor relays with DC control voltage...0 V DC need to respect the connection polarities indicated close to the coil terminals: A+ for the positive pole and - for the negative pole. Main dimensions mm, inches 45.77" 0.5 4.35" 7.80" 0 0.39" 80 3.5" 6 0.4" 35 mm EN/IEC 6075 43.69" NFZ44E, NFZ53E, NFZ6E, NFZ7E, NFZ80E Motor protection and control.3