Load break switches sircopv_058_a cat SIRCO PV UL98 from 00 to 2000 up to 500 VDC sircopv_059_a cat Strong points > Patented switching technology. > Positive break indication. > Up to 000 VDC as per characteristics by UL98. > Up to 500 VDC as per characteristics by IEC 609473. > Suitable for use in accordance with NEC rt. 690 20 issue. Conformity to standards Function SIRCO PV UL98 are manually operated multipole load break switches. They make and break on load and provide safety isolation for any PV circuit up to 000 VDC (as per UL98 standard). They comply with NEC rt. 690 (US National Electrical Code) concerning photovoltaic installations. They are compliant for use within solar inverters and enclosures governed by UL74 standard. SIRCO PV are extremely durable switches that have been tested and approved for use in the most demanding environments. They have been designed and tested for all types of applications such as earthing, floating or bipolar. > UL98 Guide WHV, file E34648 > CS C22.2#4, Class 46502, file 2964 > NEC rt 690 Issue 20 > IEC 609473 pprovals and certifications () dvantages Performance glass fibre reinforced polyester break chamber with an arc extinguishing system provides a patented safety disconnection system offering rapid extinguishing of the electric arc up to 500 VDC with current interruption of up to 2000. acktoback double load break switch acktoback double switches enables: simultanuous on load operation of two switches with a single handle, a compact solution when connecting two separate photovoltaic circuits compared with the use of two separate switches, easy connection, voltages above 000 VDC are safety broken by the use of two poles in. () Product reference on request. 2 Catalogue Extract 204
from 00 to 2000 up to 500 VDC Typical PV architecture The SIRCO PV range provides safe disconnection and isolation at all levels within your PV installation. SIRCOPV 054 The SOCOMEC solutions Combiner box LEVEL OF INSTLLTION SOCOMEC SOLUTIONS SIRCO PV One circuit 00 to 400 up to 500 VDC Recombiner box SIRCO PV 4 circuits 00 to 400 at 000 VDC 2 circuits 00 to 400 at 500 VDC Inverter SIRCO PV One circuit 00 to 2000 at 000 VDC 00 to 900 at 500 VDC Catalogue Extract 204 3
from 00 to 2000 up to 500 VDC References 000 VDC ack plate mounting Rating () poles Switch body External handle PV circuit 00 4 27PV 2009 200 4 27PV 209 250 4 2 P 27PV 2024 325 5 27PV 2032 400 5 27PV 2039 600 6 27PV 4060 800 7 27DC 408 4 P 200 7 27DC 42 2000 7 DS 27DC 420 00 4 DS 2 PV circuits 27PV 5009 200 4 DS 27PV 5024 325 5 27PV 4032 4 P 400 5 27PV 4039 600 6 DS 27PV 8060 800 7 DS 8 P 27DC 808 000 7 DS 27DC 80 S2 type lack, 3R, 2 42F 2 () Red/Yellow, 3R, 2 42G 2 () lack 4, 4X 42D 2 () Red/Yellow 4, 4X 42E 2 () S3 type lack 4, 4X 43D 3 () Red/Yellow 4, 4X 43E 3 () S4 type lack 4, 4X 44D 3 () Red/Yellow 4, 4X 44E 3 () V type lack 3R, 2 2799 745 S2 type lack, 3R, 2 42F 2 () Red/Yellow, 3R, 2 42G 2 () lack 4, 4X 42D 2 () Red/Yellow 4, 4X 42E 2 () V type lack 3R, 2 2799 745 Shaft for external handle 200 mm 7.9 inches 400 020 320 mm 2.6 inches 400 032 400 mm 5.7 inches 400 040 (2) 200 mm 7.9 inches 40 520 320 mm 2.6 inches 40 532 400 mm 5.7 inches 40 540 (2) 320 mm 2.6 inches 499 308 200 mm 7.9 inches 400 020 320 mm 2.6 inches 400 032 400 mm 5.7 inches 400 040 (2) 320 mm 2.6 inches 499 308 ridging bar (single polarity switching) x 2709 020 x 2709 04 2x 2709 04 2x 2709 0062 2x 2709 008 2x 2709 02 2x 2709 020 4x 2709 020 2x 2709 0027 2x 2709 0045 4x 2709 0062 4x 2709 02 4 PV circuits 350 5 DS 8 P 27PV 8039 () Defeatable handle. (2) Shaft guide reference 429 0000 is required for shaft length over 5.7 inches (400mm). S3 type lack 4, 4X 43D 3 () Red/Yellow 4, 4X 43E 3 () 200 mm 7.9 inches 40 520 320 mm 2.6 inches 40 532 400 mm 5.7 inches 40 540 (2) 4x 2709 0045 4 Catalogue Extract 204
from 00 to 2000 up to 500 VDC 500 VDC ack plate mounting Rating () poles Switch body External handle PV circuit Shaft for external handle ridging bar (single polarity switching) 275 5 27PV 3026 325 5 3 P 27PV 3032 400 5 27PV 3039 S2 type lack, 3R, 2 42F 2 () Red/Yellow, 3R, 2 42G 2 () lack 4, 4X 42D 2 () Red/Yellow 4, 4X 42E 2 () 200 mm 7.9 inches 400 020 320 mm 2.6 inches 400 032 400 mm 5.7 inches 400 040 (2) 2x 2709 0027 2x 2709 0045 600 6 DS 27PV 8060 4x 2709 0062 800 7 DS 8 P 27DC 808 V type lack 3R, 2 2799 745 320 mm 2.6 inches 499 308 4x 2709 02 000 7 DS 27DC 80 2 PV circuits 275 5 DS 6 P 27PV 6026 350 5 DS 27PV 6039 S3 type lack 4, 4X 43D 3 () Red/Yellow 4, 4X 43E 3 () 200 mm 7.9 inches 40 520 320 mm 2.6 inches 40 532 400 mm 5.7 inches 40 540 (2) 4x 2709 0027 4x 2709 0045 () Defeatable handle. (2) Shaft guide reference 429 0000 is required for shaft length over 5.7 inches (400mm). Catalogue Extract 204 5
from 00 to 2000 up to 500 VDC ccessories External operation Use In a combiner box, located close to the solar cell strings, or located close to the inverter, we recommend to use a door interlocked external handle for its safety features. Door interlocked external operation handles include an escutcheon, are padlockable and must be utilised with an extension shaft. Example The locking function of the enclosure in the "ON" position will force the operator to safely disconnect and isolate the solar cell strings prior to any intervention. Opening the door when the switch is on "ON" position is possible by defeating the locking function using a tool (authorized persons only). The interlocking function is restored when the door is closed back. acces_50_a_2_cat S2 type handle acces_236_a_2_cat Reinforced S2 type handle Handle type Handle colour NEM degree of protection Reference 4 5 4 DS S2 lack 42F 2, 3R, 2 4 5 4 DS S2 Red/Yellow 42G 2 4 5 4 DS S2 lack 42D 2 4 5 4 DS S2 Red/Yellow 42E 2 5 DS 6 S3 lack 43D 3 4, 4X 5 DS 6 S3 Red/Yellow 43E 3 7 S4 lack 44D 3 7 S4 Red/Yellow 44E 3 6 DS 7 DS V lack, 3R, 2 2799 745 acces_66_a_2_cat acces_52_a_2_cat access_89_a_2_cat S3 type handle S4 type handle V type handle Shaft for external handle Use Standard lengths: 7.9 in / 200 mm, 2.6 in / 320 mm, 5.7 in / 400 mm. Other lengths: please consult us. acces_44_b cat Handle type Dimension (inches) Dimension X (mm) Length (inches) Length (mm) Reference 4 S2 6.6 50 295 7.9 200 400 020 4 S2 6 6.3 50 45 2.6 320 400 032 4 S2 6 9.4 50 495 5.7 400 400 040 5 S2 8 2.9 203 328 7.9 200 400 020 5 S2 8 7.6 203 448 2.6 320 400 032 5 S2 8 20.7 203 525 5.7 400 400 040 6 S3 8.70 3.50 220 343 7.9 200 40 520 6 S3 8.70 8.23 220 463 2.6 320 40 532 6 S3 8.70 2.38 220 543 5.7 400 40 540 7 S4 2 4.4 305 366 7.9 200 40 520 7 S4 2 9. 305 485 2.6 320 40 532 7 S4 2 22.2 305 564 5.7 400 40 540 4 DS S2 2 4.3 305 363 7.9 200 400 020 4 DS S2 2 9 305 483 2.6 320 400 032 4 DS S2 2 22.0 305 56 5.7 400 400 040 5 DS S3, S4 6 8.4 406 467 7.9 200 40 520 5 DS S3, S4 6 23. 406 589 2.6 320 40 532 5 DS S3, S4 6 26.3 406 668 5.7 400 40 540 6 DS V 20 28. 508 74 2.6 320 499 308 6 DS V 20 3.3 508 795 5.7 400 499 309 7 DS V 20 28. 508 74 2.6 320 499 308 7 DS V 20 39.4 508 795 5.7 400 499 309 X acces_369_a cat acces_202_a x_cat 6 Catalogue Extract 204
from 00 to 2000 up to 500 VDC S type handle adapter Use For handles S2, S3 and S4. Dimensions Increases the distance between the handle grip and the door by 2 mm, for better handling. Colour NEM degree of protection To be ordered in multiples of Reference lack, 3R, 2 0 493 0000 acces_87_a_3_cat lternative S type handle cover colours Use For handles S2, S3 and S4. Handle colour Other colours: please consult us. To be ordered in multiples of Handle type Reference Light grey S2, S3 50 40 000 Dark grey S2, S3 50 40 00 Light grey S4 50 40 003 Dark grey S4 50 40 004 acces_98_a_3_cat uxiliary contact Use Prebreak and signalling of positions 0 and I: to 2 NO/NC auxiliary contacts, to 2 low level NO/NC auxiliary contacts. Electrical characteristics 300. NO/NC contact Position C Type Reference 4 7 contact 2799 002 4 7 2 contacts NO/NC 2799 0022 4 DS 7 DS contact 459 002 Low level NO/NC auxiliary contacts Position C Type Reference 4 7 contact 2799 02 4 7 2 contacts NO/NC 2799 022 4 DS 7 DS contact 499 0022 acces_076_a cat Terminal screen Use Top or bottom protection against direct contact with terminals or connection parts. No. of pole Position Pack Reference 4 2 P top or bottom unit 2798 302 5 3 P top or bottom unit 2798 304 5 4 P top or bottom unit 2798 404 6 4 P top or bottom unit 2798 406 7 4 P top or bottom unit 2798 42 4 DS 2 P top or bottom unit 458 302 5 DS 6 P top or bottom unit 458 304 5 DS 8 P top or bottom unit 458 404 6 DS 8 P top and bottom 2 units 2798 806 7 DS 8 P top or bottom unit 2798 42 acces_079_a cat Catalogue Extract 204 7
from 00 to 2000 up to 500 VDC ccessories (continued) ridging bars for connecting poles in Use The bridging bars will make easy the connection of the poles in, allowing the following configurations (). () Other connections: refer to mounting instructions. 000 VDC Rating () Quantity to be ordered to connect two poles in Fig. Reference PV circuit 4 00 2709 020 4 200 2709 020 4 250 2709 020 5 325 2709 04 5 400 2 2 2709 04 6 600 2 3 2709 0062 7 800 2 3 2709 008 7 200 2 3 2709 02 7 DS 2000 2 3 2709 02 2 PV circuits 4 DS 00 2 2709 020 4 DS 200 4 4 2709 020 5 325 2 5 2709 0027 5 400 2 6 2709 0045 5 400 2 6 2709 0045 6 DS 600 4 3 2709 0062 7 DS 800 4 3 2709 02 7 DS 200 4 3 2709 02 4 PV circuits 5 DS 350 2 6 2709 0045 500 VDC Rating () Quantity to be ordered to connect two poles in Fig. Reference PV circuit 5 275 2 5 2709 0027 5 325 2 5 2709 0027 5 400 2 6 2709 0045 6 DS 600 4 3 2709 0062 7 DS 800 4 3 2709 02 7 DS 000 4 3 2709 02 2 PV circuits 5 DS 275 4 5 2709 0027 5 DS 350 4 6 2709 0045 8 Catalogue Extract 204
from 00 to 2000 up to 500 VDC ridging bars for connecting poles in (continued) acces_38_a x_cat Fig. acces_382_a x_cat Fig. 2 acces_374_a x_cat Fig. 4 acces_383_a x_cat Fig. 3 acces_386_a x_cat acces_378_a x_cat Fig. 5 Fig. 6 Catalogue Extract 204 9
from 00 to 2000 up to 500 VDC ccessories (continued) Cage terminals Use For the connection of bare copper cables onto the terminals (without lugs). Optional fan out kit for ratings of 800 to 200 for connecting several cables to the switch. Rating max () Numbrer and size of cables Max. number of connections per terminal Type of cable Quantity Reference 4 4 DS 00 200 conductor (#6300MCM) Cu / l 2 lugs 3954 2020 4 4 DS 00 200 2 conductors (#42/0) Cu / l 2 lugs 3954 2025 4 4 DS 325 400 conductor (#2600MCM) Cu / l 2 lugs 3954 2040 4 4 DS 325 400 2 conductors (#6350MCM) Cu / l 2 lugs 3954 204 6 6 DS 600 2 conductors (#2600MCM) Cu / l 2 lugs 3954 2060 7 800 200 2 conductors (#2600MCM) 2 Cu / l 2 lugs 3954 2060 7 800 200 2 conductors (#2600MCM) 3 () Cu / l 3 lugs 3954 3060 7 DS 2000 2 conductors (#2600MCM) 2 (2) Cu / l 2 lugs 3954 2060 7 DS 2000 2 conductors (#2600MCM) 3 (3) Cu / l 3 lugs 3954 3060 () Order a fan out kit reference 2709 203 for connecting 3 connectors per terminal (6 in total for the switch). (2) 2 connectors per terminal with the connection kit 2729 200. (3) 3 connectors per terminal with the connection kits 2729 20 and 2709 202. ul_032_a Copper bar connection kits Use To allow connection between the two power terminals from a same pole for 2000 ratings. (Fig., Fig. 2 and Fig. 3) Fig. Top or bottom flat connection Rating () Figure 7 DS Quantity to order per pole terminals Reference 800 000 2 2729 200 800 000 2 3 2729 202 2000 2 2729 200 2000 2 3 2729 202 acces_32_b x_cat Fig. 2 Fig. 3 Top or bottom edgewise connection Rating () Figure Quantity to order per pole terminals Reference 7 DS 800 2000 3 3 2729 20 acces_33_b x_cat acces_34_b x_cat 0 Catalogue Extract 204
from 00 to 2000 up to 500 VDC Characteristics as per UL98 standards Rating () 00 200 circuits Rated voltage () the switch () the switch circuit 000 VDC 00 2 P 2 P 4 200 2 P 2 P 4 2 circuits 600 VDC 00 P 2 P 4 30 P 2 P 4 2 circuits 000 VDC 00 2 P 4 P 4 DS 200 2 P 4 P 4 DS 4 circuits 600 VDC 00 P 4 P 4 DS 30 P 4 P 4 DS Shortcircuit capacity at 000 VDC (any circuit breaker) Prospective shortcircuit current (k rms DC) 0 () 0 () Connection terminals Min. connection wire range/ WG #6 #6 Max. connection wire range/ WG 300MCM 300MCM Mechanical characteristics Durability (number of operating cycles) 0 000 0 000 Operating effort (lbs.in/nm) 88.5/0 88.5/0 uxiliary contact Electrical characteristics 300 300 as per IEC 609473 standard Thermal current at 40 C () 60 250 Thermal current at 50 C () 60 250 Thermal current at 60 C () 60 250 Rated insulation voltage U i (V) 500 500 Rated impulse withstand voltage U imp (kv) 2 2 circuits Rated voltage Utilisation category () circuit 000 VDC DC2 60 2 P 2 P 4 250 2 P 2 P 4 circuit 500 VDC DC2 60 4 P 4 P 4 DS 250 4 P 4 P 4 DS 2 circuits 000 VDC DC2 60 2 P 4 P 4 DS 250 2 P 4 P 4 DS 4 circuits 600 VDC DC2 25 P 4 P 4 DS 60 P 4 P 4 DS () Without fuse during 50 ms. the switch () the switch Catalogue Extract 204
from 00 to 2000 up to 500 VDC Characteristics (continued) as per UL98 standards Rating () 250 275 circuits Rated voltage () the switch () the switch circuit 000 VDC 250 2 P 2 P 4 275 2 P 2 P 5 2 circuits 600 VDC 30 P 2 P 4 25 P 2 P 5 2 circuits 000 VDC 275 2 P 4 P 5 4 circuits 600 VDC 25 P 4 P 5 4 circuits 000 VDC 25 2 P 8 P 5 DS 6 circuits 600 VDC 25 P 6 P 5 DS 8 circuits 600 VDC 25 P 8 P 5 DS Shortcircuit capacity at 000 VDC (any circuit breaker) Prospective shortcircuit current (k rms DC) 0 () 0 () Connection terminals Min. connection wire range/ WG #6 2x#6 Max. connection wire range/ WG 300MCM 600MCM Mechanical characteristics Durability (number of operating cycles) 0 000 6 000 Operating effort (lbs.in/nm) 88.5/0 28.3/4.5 uxiliary contact Electrical characteristics 300 300 as per IEC 609473 standard Thermal current at 40 C () 35 275 Thermal current at 50 C () 35 275 Thermal current at 60 C () 35 275 Rated insulation voltage U i (V) 500 500 Rated impulse withstand voltage U imp (kv) 2 2 circuits Rated voltage Utilisation category () circuit 000 VDC DC2 35 2 P 2 P 4 275 2 P 2 P 5 circuit 500 VDC DC2 35 4 P 4 P 4 DS 275 2 P 3 P 5 2 circuits 000 VDC DC2 35 2 P 4 P 4 DS 275 2 P 4 P 5 4 circuits 600 VDC DC2 60 P 4 P 4 DS 275 P 4 P 5 4 circuits 000 VDC DC2 275 2 P 8 P 5 DS 6 circuits 600 VDC DC2 275 P 6 P 5 DS 8 circuits 600 VDC DC2 275 P 8 P 5 DS () Without fuse during 50 ms. the switch () the switch 2 Catalogue Extract 204
from 00 to 2000 up to 500 VDC as per UL98 standards Rating () 325 350 circuits Rated voltage () the switch () the switch circuit 000 VDC 325 2 P 2 P 5 2 circuits 600 VDC 25 P 2 P 5 2 circuits 000 VDC 325 2 P 4 P 5 350 3 P 6 P 5 DS 4 circuits 600 VDC 25 P 4 P 5 4 circuits 000 VDC 325 2 P 8 P 5 DS 350 2 P 8 P 5 DS 6 circuits 600 VDC 25 P 6 P 5 DS 25 P 6 P 5 DS 8 circuits 600 VDC 25 P 8 P 5 DS 25 P 8 P 5 DS Shortcircuit capacity at 000 VDC (any circuit breaker) Prospective shortcircuit current (k rms DC) 0 () 0 () Connection terminals Min. connection wire range/ WG 2x#6 2x#6 Max. connection wire range/ WG 600MCM 600MCM Mechanical characteristics Durability (number of operating cycles) 6 000 6 000 Operating effort (lbs.in/nm) 28.3/4.5 28.3/4.5 uxiliary contact Electrical characteristics 300 300 as per IEC 609473 standard Thermal current at 40 C () 400 500 Thermal current at 50 C () 400 500 Thermal current at 60 C () 400 500 Rated insulation voltage U i (V) 500 500 Rated impulse withstand voltage U imp (kv) 2 2 the switch () the switch Rated Utilisation circuits voltage category () circuit 000 VDC DC2 400 2 P 2 P 5 2 circuits 000 VDC DC2 400 2 P 4 P 5 500 3 P 6 P 5 DS 4 circuits 600 VDC DC2 275 P 4 P 5 4 circuits 000 VDC DC2 400 2 P 8 P 5 DS 500 2 P 8 P 5 DS 6 circuits 600 VDC DC2 275 P 6 P 5 DS 275 P 6 P 5 DS 8 circuits 600 VDC DC2 275 P 8 P 5 DS 275 P 8 P 5 DS () Without fuse during 50 ms. Catalogue Extract 204 3
from 00 to 2000 up to 500 VDC Characteristics (continued) as per UL98 standards Rating () 400 600 circuits Rated voltage () the switch () the switch circuit 000 VDC 400 2 P 2 P 5 600 4 P 4 P 6 2 circuits 600 VDC 25 P 2 P 5 600 3 P 6 P 6 DS 2 circuits 000 VDC 400 2 P 4 P 5 600 4 P 8 P 6 DS 4 circuits 600 VDC 25 P 4 P 5 Shortcircuit capacity at 000 VDC (any circuit breaker) Prospective shortcircuit current (k rms DC) 0 () 0 () Connection terminals Min. connection wire range/ WG 2x#6 2x#2 Max. connection wire range/ WG 600MCM 2 x 600MCM Mechanical characteristics Durability (number of operating cycles) 6 000 6 000 Operating effort (lbs.in/nm) 28.3/4.5 327.5/37 uxiliary contact Electrical characteristics 300 300 as per IEC 609473 standard Thermal current at 40 C () 500 800 Thermal current at 50 C () 500 Thermal current at 60 C () 500 Rated insulation voltage U i (V) 500 500 (2) Rated impulse withstand voltage U imp (kv) 2 2 the switch () the switch circuits Rated voltage Utilisation category () circuit 000 VDC DC2 500 2 P 2 P 5 800 4 P 4 P 6 circuit 500 VDC DC2 500 2 P 3 P 5 800 8 P 8 P 6 DS 2 circuits 000 VDC DC2 500 2 P 4 P 5 800 4 P 8 P 6 DS 4 circuits 600 VDC DC2 275 P 4 P 5 () Without fuse during 50 ms. (2) 200 VDC for 6. 4 Catalogue Extract 204
from 00 to 2000 up to 500 VDC as per UL98 standards Rating () 800 200 circuits Rated voltage () the switch () the switch circuit 000 VDC 800 4 P 4 P 7 200 4 P 4 P 7 2 circuits 600 VDC 800 3 P 6 P 7 DS 200 3 P 6 P 7 DS 2 circuits 000 VDC 800 4 P 8 P 7 DS 200 4 P 8 P 7 DS Shortcircuit capacity at 000 VDC (any circuit breaker) Prospective shortcircuit current (k rms DC) 0 () 0 () Connection terminals Min. connection wire range/ WG 4x#2 4x#2 Max. connection wire range/ WG 6x 600MCM (2) 6x 600MCM (2) Mechanical characteristics Durability (number of operating cycles) 3 500 3 500 Operating effort (lbs.in/nm) 495.7/56 663.9/75 uxiliary contact Electrical characteristics 300 300 as per IEC 609473 standard Thermal current at 40 C () 000 400 Rated insulation voltage U i (V) 500 (3) 500 (3) Rated impulse withstand voltage U imp (kv) 2 2 circuits Rated voltage Utilisation category () the switch () the switch circuit 000 VDC DC2 000 4 P 4 P 7 400 4 P 4 P 7 DS circuit 500 VDC DC2 000 8 P 8 P 7 DS 000 8 P 8 P 7 DS 2 circuits 000 VDC DC2 000 4 P 8 P 7 DS 000 4 P 8 P 7 DS () Without fuse during 50 ms. (2) Maximum 6 x 600MCM with fan out kit 2729 203. (3) 200 VDC for 7. Catalogue Extract 204 5
from 00 to 2000 up to 500 VDC Characteristics (continued) as per UL98 standards Rating () circuits Rated voltage () 2000 the switch circuit 000 VDC 2000 8 P 8 P 7 DS Shortcircuit capacity at 000 VDC (any circuit breaker) Prospective shortcircuit current (k rms DC) 0 () Connection terminals Min. connection wire range/ WG 4x#2 Max. connection wire range/ WG 6x 600MCM (2) Mechanical characteristics Durability (number of operating cycles) 3 500 Operating effort (lbs.in/nm) 663.9/75 uxiliary contact Electrical characteristics 300 as per IEC 609473 standard Thermal current at 40 C () 2200 Rated insulation voltage U i (V) 200 Rated impulse withstand voltage U imp (kv) 2 circuits Rated voltage Utilisation category () the switch circuit 000 VDC DC2 2000 8 P 8 P 7 DS () Without fuse during 50 ms. (2) Maximum 6 x 600MCM with fan out kit 2729 203. 6 Catalogue Extract 204
from 00 to 2000 up to 500 VDC Pole connection in PV circuit 000 VDC 45 2P 67 4P Grounded Ungrounded Grounded Ungrounded Ungrounded () () sircopv_084_a x_cat sircopv_075_a x_cat () sircopv_085_a x_cat sircopv_086_a x_cat () sircopv_076_a x_cat () () 7 DS 8P Grounded Ungrounded sircopv_087_a x_cat sircopv_088_a x_cat PV circuit 500 VDC 45 2P Grounded sircopv_077_a x_cat Ungrounded () () sircopv_087_a x_cat sircopv_078_a x_cat 6 DS 7 DS 8P Grounded () () sircopv_078_a x_cat. Front switch.. Rear switch. Ungrounded () (). Front switch.. Rear switch. Catalogue Extract 204 7
from 00 to 2000 up to 500 VDC Pole connection in (continued) 2 PV circuits 000 VDC 4 DS 4P Grounded Ungrounded () () 5 4P Grounded Ungrounded 2 () () sircopv_089_a x_cat 2 sircopv_079_a x_cat () 2 () sircopv_080_a x_cat sircopv_080_a x_cat () 2 2 () 5 DS 7 DS 8P Grounded Ungrounded () () sircopv_078_a x_cat () () sircopv_09_a x_cat () 2 () sircopv_08_a x_cat () () 2 () (). Front switch.. Rear switch. 2 PV circuits 500 VDC 5 DS 6P Grounded Ungrounded () () sircopv_092_a x_cat 2 sircopv_082_a x_cat () 2 (). Front switch.. Rear switch. 4 PV circuit 000 VDC 5 DS 8P Grounded Ungrounded () () () () sircopv_093_a x_cat 2 3 4 sircopv_083_a x_cat () () 2 () 3 4 (). Front switch.. Rear switch. 8 Catalogue Extract 204
from 00 to 2000 up to 500 VDC Dimensions (in / mm) 45 J J 0.29 7.5 Ø 0.35 Ø 9 Ø 0.27 Ø 7 Y 0.53 3.3 4 0.98 25 Ø 0.43 Ø K K H.8 30 5 0.79 20.77 45 H H Ø 0.5 Ø 3 sircoul_054_a x_cat J2 J3 C.96 50 No. of pole Measurement C H H max. J J J2 J3 K K Y 4 2 P inches 7.08 6.30 3.74 5.2 4.2 6.30 2.6 3.94 5.3.89.5 4 2 P mm 80 60 95 32.5 07 60 55 00 35 48 38.5 5 2 P inches 9.05.23 4.92 8 6.53 8.26 2.95 5.2 7.67 2.65 2.08 5 2 P mm 230 260 28 203 66 20 75 30 95 67.5 53 5 3 P inches 9.05 0.23 4.98 8 6.53 8.26 2.95 2.56 7.67 2.65 2.02 5 3 P mm 230 260 26.5 203 66 20 75 65 95 67.5 5.5 5 4 P inches.4 0.23 4.98 8 6.53 0.63 5.3 2.56 7.67 2.65 2.02 5 4 P mm 290 260 26.5 203 66 270 35 65 95 67.5 5.5 4 DS 5 DS J J 0.29 7.5 Ø 0.35 Ø 9 Ø 0.27 Ø 7 Y Y C 0.53 3.3 4 DS 0.98 25 Ø 0.43 Ø K H.8 30 5 DS K 0.79 20.77 45 H H2 Ø 0.5 Ø 3 sircoul_055_a x_cat J3 J2 H.96 50 No. of pole Measurement C H H H max. J J J2 J3 K K Y Y 4 DS 4 P inches 9.60 6.30 6.37 5.08 6.93 4.2 6.30.37 3.93 5.3 2.65.5 5.2 4 DS 4 P mm 244 60 62 29 76 07 60 35 00 35 67.5 38.5 32.5 5 DS 6 P inches.85 0.23 9.39 8 6.5 6.53 6.26.37 2.56 7.67 2.70 2.02 7.44 5 DS 6 P mm 30 260 238.5 203 65.5 66 20 35 65 95 68.5 5.5 89 5 DS 8 P inches 4.2 0.23 9.39 8 6.5 6.53 0.63.37 2.56 7.67 2.70 2.02 7.44 5 DS 8 P mm 36 260 238.5 203 65.5 66 270 35 65 95 68.5 5.5 89 Catalogue Extract 204 9
from 00 to 2000 up to 500 VDC Dimensions (in / mm) (continued) 6 J C J Y 0.82 2.97 50 Ø 0.4 Ø 0.5 H K2 K K H.95 49.5 sircoul_056_a x_cat 2.75 70 Ø 0,35 Ø 9 3.5 80 H 6 No. of pole Measurement C H H J J K K K2 Y 4 P inches 4.7 3.38 5.47 0.63 5.70 3.9 6.59 6.88 2.34.0.83 4 P mm 630 340 39 270 45 335 67.5 75 59.5 28 46.5 6 DS C J J Y Y 0.82 2.97 50 Ø 0.4 Ø 0.5 sircoul_057_a x_cat K K H H.95 49.5 2.75 70 3.5 80 H No. of pole Measurement C H H J J K K Y Y 6 ds 8 P inches 8.34 3.8 4.56 0.63 3.66 3.8 2.02 9.84 4.92 2.6 9.98 8 P mm 466 340 370 270 347 335 5.5 250 25 66.5 253.5 20 Catalogue Extract 204
from 00 to 2000 up to 500 VDC 7 J J.73 44 0.82 20.85 3.54 90 Y C Ø 0.4 Ø 0.5 7 DS C J J.73 44 0.82 20.85 3.54 90 Y Ø 0.4 Ø 0.5 K K 0.35 9 H H H H2 K2 K sircoul_058_a x_cat K H 4.72 20 H 7 No. of pole Measurement C H H H2 J J K K K2 Y 4 P inches 20.9.33 7.97.89 8.30 8.0 8.38 9.9 9.84 3.82.0 4.23 sircoul_06_a x_cat 4 P mm 53 288 200 302 2 203.5 467 233.5 250 97 28 07.5 4.72 20 H No. of pole Measurement C H H J J K K Y Y 7 DS 8 P inches 23.95.33 3..85 5.3 8.38 2.02 9.84 4.92 4.23.55 8 P mm 608.5 288 333 30 389 467 5.5 250 25 07.5 293.5 Catalogue Extract 204 2
from 00 to 2000 up to 500 VDC Dimensions for external handles (in / mm) 4 4 DS 5 Handle type S2 type Front operation Direction of operation 0 Door drilling 40 Ø 78 90 4 Ø 7 poign_03_a gb_cat 45 25 I Ø 37 28 5 DS 6 Front operation Handle type Direction of operation Door drilling S3 type Ø 78 90 Ø 37 0 40 poign_035_a gb_cat 6 20 28 4 Ø 7 22 Catalogue Extract 204
from 00 to 2000 up to 500 VDC 7 Handle type S4 type Front operation Direction of operation Door drilling I Ø78 90 Ø 37 poign_036_a gb_cat 350 0 28 4 Ø 7 60 40 6 DS 7 DS Handle type V type Front operation Direction of operation I Door drilling 50 4 Ø 6,5 poign_037_a gb_cat 22 545 0 Ø 3 50 Catalogue Extract 204 23
from 00 to 2000 up to 500 VDC ridging bars (in / mm) 4 4 DS 2709 020 2.5 00 ±0.3 5 5 DS 2709 04 Ø3 sircoul_062_a x_cat 43.5 27 Ø 35 25 7 3 9 ±0.2 22.5 30 ±0.3 75 5 50 sircoul_062_a x_cat 2709 0045 6 6 DS 0 2709 0062 Ø3 R 6 sircoul_047_b x_cat 0.55 3.94 4 00 0.98 3.5 25 80 0.98 25 Ø 0.43 Ø 0.2 5 4 ±0.2 6 0 2709 0027 22.5 46.5 65 ±0,2 7 0 53 5 90 57.06 sircoul_062_a x_cat 5 7 22.5 65 ± 0.3 2709 008 45 26 Ø3 sircoul_062_a x_cat sircoul_048_b x_cat 3.44 87.5 Ø 0.4 Ø 0.5.02.49 26 8.27 38 0.35 20 8.69 43 9 ±0.35 7 7 DS 2709 02 4.82 22.5 Ø 0.4 Ø 0.5 sircoul_049_b x_cat.02.49 26 8.27 38 0.35 20 8 2.8 7 24 Catalogue Extract 204
from 00 to 2000 up to 500 VDC Mounting orientation ll frames 4 DS 5 DS 6 DS 7 DS sircoul_028_a x_cat sircoul_029_a x_cat sircoul_030_a x_cat Terminal lugs (in / mm) 00 to 250 00 to 250 400.52 38.8 25 0.45 Ø.6.26 32.476 0.63 37.5 6 0.27 7.3 35 2.8 7.5 Ø 0.4 Ø 4.7 0.63 5.88 sirco_5_b us_cat.2 28.6 sircoul_038_a us_cat 0.2 5 0.79 20 sircoul_00_a us_cat.8 46 0.44.3 300MCM 2/0 600MCM 400 600 to 2000 2.88 2 73.5 5 0.53 3.46.49 38.94 49.30 0.40 Ø0.2 sircoul_026_b us_cat.9 30.23 0.25 6.35.25 3.75 sirco_6_b us_cat 3.5 80 2.87 73 2 x 350MCM 2 x 600MCM Catalogue Extract 204 25