HVC utomatic alance Index Weights Individual Weights Y-all Models Flow Rate (GPM) Connection Size Page 2519 0.50-5.00 1/4 to 3/4 V-SPEC-2519 2518 0.50-5.00 1/2 to 3/4 V-SPEC-2518 2517 0.50-9.00 1/2 to 3/4 V-SPEC-2517 2516 0.50-9.00 1/2 to 1 V-SPEC-2516 2514 0.50-9.00 1/2 to 1 V-SPEC-2514 2524 0.50-25.0 3/4 to 1-1/2 V-SPEC-2524 Inline Models Flow Rate (GPM) Connection Size Page 2513 0.50-9.00 1/2 to 1 V-SPEC-2513 2510 0.50-9.00 1/2 to 1 V-SPEC-2510 2520 0.50-25.0 3/4 to 1-1/2 V-SPEC-2520 2530 9.00-75.0 1 to 1-1/2 V-SPEC-2530 2535 9.00-100 2 to 2-1/2 V-SPEC-2535 2540 40.0-200 2 to 3 V-SPEC-2540 2545 9.00-225 2 to 4 V-SPEC-2545 2560 120-1800 4 to 10 V-SPEC-2560 2570 120-35,000 6 to 36 V-SPEC-2570 2511 0.50-9.00 1/2 to 3/4 V-SPEC-2511 2521 9.00-24.0 3/4 to 1 V-SPEC-2521
Sizes: 1/4, 3/8, 1/2 & 3/4 GPM: 0.50-5.00 Type: Y-all utomatic alancing Model: 2519 Pressure Temperature Ports Outlet FNPT, FSWT and MNPT Outlet / Connections 3/4 Union Ends Differential Operating Pressure: 2 80 PSID 0.50 2.75 GPM 3 80 PSID 3.00 5.00 GPM and Outlet Port Options Short Handle (Shown) Weighs between 1.2 1.5 lbs. Suitable for 600 PSIG Plugged (Ports Machined w/1/4 Plug) Extended Handles Short Handle (Standard) all Pressure / Temperature Ports all Seat Stem End Cap all End Fitting Zinc Plated Steel Chrome Plated Teflon OVERLL LENGTH (ll length calculations are machined union end fittings) Outlet 1/4 FSWT 38 FSWT 1/2 FNPT 1/2 MNPT 1/2 FSWT 3/4 FNPT 3/4 MNPT 3/4 FSWT 1/4 FSWT 4.5 4.5 5.2 5.1 4.5 4.8 5.2 4.5 3/8 FSWT 4.5 4.5 5.2 5.1 4.5 4.8 5.2 4.5 1/2 FNPT 4.6 4.6 5.2 5.1 4.6 4.8 5.2 4.6 1/2 MNPT 5 5 5.7 5.5 5.0 5.2 5.6 5.0 1/2 FSWT 4.5 4.5 5.2 5.1 4.5 4.8 5.2 4.5 3/4 FNPT 4.9 4.9 5.6 5.5 4.9 5.1 5.6 4.9 3/4 MNPT 5 5 5.7 5.6 5.0 5.3 5.7 5.0 3/4 FSWT 4.7 4.7 5.4 5.3 4.7 4.9 5.4 4.7 V-SPEC-2519-001
Sizes: 1/2 & 3/4 GPM: 0.50-5.00 Type: Y-all utomatic alancing w/iso 5211 ctuator Pad Model: 2518 Pressure Temperature Ports ISO Pad Outlet V FNPT, FSWT and MNPT Outlet / Connections Union 3/4 Union Ends Differential Operating Pressure: 2 80 PSID 0.50 2.75 GPM 3 80 PSID 3.00 5.00 GPM and Outlet Port Options Weighs between 1.2 1.5 lbs. without the actuatorª Suitable for 600 PSIG Cycle Life of all Greater than 100,000 Full Cycles Modified Equal Percentage Cv s of 1.1, 2.0, 2.6 and 3.0 Torque Less Than 35 in. lbs.@300 PSID Quick Opening Cv of 4.5 (No Disc) ctuator Pad ISO 5211/F03/Y/D/9 NSI Class V Seat Leakage Plugged (Ports Machined w/1/4 Plug) V-SPEC-2518-001 Union End all Pressure / Temperature Ports all Seat Stem End Cap all End Fitting OVERLL LENGTH Outlet 1/2 FNPT 3/4 MNPT 1/2 MNPT Chrome Plated Teflon 3/4 MNPT 1/2 FSWT 1/2 FNPT 5.2 4.8 5.1 5.2 4.6 4.6 3/4 FNPT 5.6 5.1 5.5 5.6 4.9 4.9 1/2 MNPT 5.7 5.2 5.5 5.6 5.0 5.0 3/4 MNPT 5.7 5.3 5.6 5.7 5.0 5.0 1/2 FSWT 5.2 4.8 5.1 5.2 4.5 4.5 3/4 FSWT 5.4 4.9 5.3 5.4 4.7 4.7 3/4 FSWT ªRefer to Components Section for specifications on TC4 & TC5 to be used only with the 2518 Mesurflo valve.
Sizes: 1/2 & 3/4 GPM: 0.50-9.00 Type: Y-all utomatic alancing Model: 2517 Outlet FSWT Outlet / Connections Differential Operating Pressure: 2 80 PSID 0.50 5.50 GPM 3 80 PSID 6.00 6.50 GPM 5 80 PSID 7.00 7.50 GPM 7 80 PSID 8.00 9.00 GPM Suitable for 600 PSIG End Cap Size 1/2 3/4 IN MM IN MM 2.04 52 2.36 60 2.12 54 2.11 54 C 1.58 40 1.58 40 V-SPEC-2517-001
Sizes: 1/2, 3/4 & 1 GPM: 0.50-9.00 Type: Y-all utomatic alancing Model: 2516 FNPT, FSWT and MNPT Outlet / Connections Differential Operating Pressure: 2 80 PSID 0.50 5.50 GPM 3 80 PSID 6.00 6.50 GPM 5 80 PSID 7.00 7.50 GPM 7 80 PSID 8.00 9.00 GPM Short or Lever Handle and Outlet Port Options Suitable for 600 PSIG Extended Handles all Chrome Plated Pressure / Temperature Ports all Seat Teflon Stem End Cap all End Fitting Short Handle Zinc Plated Steel IN MM IN MM 5.2 132 1.5 38 V V-SPEC-2516-001
Sizes: 1/2, 3/4 & 1 GPM: 0.50-9.00 Type: Y-all utomatic alancing Model: 2514 FNPT, FSWT and MNPT Outlet / Connections Differential Operating Pressure: 2 80 PSID 0.50 5.50 GPM 3 80 PSID 6.00 6.50 GPM 5 80 PSID 7.00 7.50 GPM 7 80 PSID 8.00 9.00 GPM Short* or Lever Handle Right or Left Hand Porting and Outlet Port Options Suitable for 600 PSIG None (Ports Not Machined) Plugged (Ports Machined w/1/4 Plug) Extended Handles Manual ir Vent (Placed in Top Port) Union End all Chrome Plated Pressure / Temperature Ports all Seat Teflon Stem End Cap all End Fitting Short Handle Zinc Plated Steel Coupling Nut IN MM IN MM 5.9 149 E 1.6 41 1.5 38 F 2.4 61 C 2.6 66 G 2.5 64 D 4 102 V-SPEC-2514-001
Sizes: 3/4, 1, 1-1/4 & 1-1/2 GPM: 0.50-25.0 Type: Y-all utomatic alancing Model: 2524 FNPT, FSWT and MNPT Outlet / Connections Differential Operating Pressure: 2 80 PSID 0.50 20.0 GPM 3 80 PSID 21.0 25.0 GPM Short or Lever Handle Right or Left Hand Porting and Outlet Port Options Suitable for 600 PSIG Plugged (Ports Machined w/1/4 Plug) Extended Handles Manual ir Vent (Placed in Top Port) Union End all Chrome Plated Pressure / Temperature Ports all Seat Teflon Stem End Cap all End Fitting Short Handle Zinc Plated Steel Coupling Nut Holder IN MM IN MM 6.9 175 E 1.6 41 3.3 84 F 2.7 69 C 2.6 66 G 2.5 64 D 4 102 V V-SPEC-2524-001
Sizes: 1/2, 3/4 & 1 GPM: 0.50-9.00 Type: utomatic alancing Model: 2513 Outlet 1/2, 3/4 & 1 FSWT / Outlet Connections 3/4 Female & Male Garden Hose / Outlet Connections 1/2 & 3/4 FNPT & MNPT / Outlet Connections 2 80 PSID Range Suitable for 600 PSIG Tailpiece Coupling Nut IN MM IN MM 1.9 48 1.25 32 V-SPEC-2513-001
Sizes: 1/2, 3/4 and 1 GPM: 0.50-9.00 Type: utomatic alancing Model: 2510 FNPT and MNPT / Outlet Connections 2 80 PSID Range Suitable for 600 PSIG & Flow Rate Union Nut Tailpiece Pressure / Temperature Ports Retainer Ring IN MM IN MM 3.07 78 2 51 V-SPEC-2510-001
Sizes: 3/4, 1, 1-1/4 & 1-1/2 GPM: 0.50-25.0 Type: utomatic alancing Model: 2520 FlowDirection Pressure Temperature Ports Outlet FNPT and MNPT Connections FNPT, FSWT and MNPT Outlet Connections Differential Operating Pressure 2 80 PSID Range 0.50 20.0 GPM 3 80 PSID Range 21.0 25.0 GPM Suitable for 600 PSIG Plugged (Ports Machined w/1/4 Plug) Union Nut Tailpiece Pressure / Temperature Ports Retainer Ring IN MM IN MM 3.9 99 1 1/8 29 V-SPEC-2520-001
Sizes: 1, 1-1/4 & 1-1/2 GPM: 9.00-75.0 Type: utomatic alancing Model: 2530 FNPT /Outlet Connections 1 GPM Increments Differential Operating Pressure 2 80 PSID 0.50 5.50, 24.0 62.0 GPM 3 80 PSID 21.0 23.0, 63.0 72.0 GPM 4 80 PSID 73.0 75.0 GPM Suitable for 400 PSIG Gray Iron Tailpiece Gray Iron Pressure / Temperature Ports Retainer Cage Holder olt & Nut Steel Plug Laser Cut Center Plate C Size IN MM IN MM IN MM 1 3.3/8 86 1.48 38 2.84 72 1 1/4 2 51 1.45 37 2.82 72 1 1/2 3.35 85 1.44 37 2.80 71 V-SPEC-2530-001
Sizes: 2 & 2-1/2 GPM: 9.00-100.0 Type: utomatic alancing Model: 2535 FNPT /Outlet Connections 1 GPM Increments Differential Operating Pressure 2 80 PSID 9.0 20.0, 26.0 96.0 GPM 3 80 PSID 21.0 23.0 GPM 4 80 PSID 24.0 25.0 GPM Suitable for 400 PSIG Gray Iron Pressure / Temperature Ports Retainer Cage Holder Plug Center Plate Size IN MM IN MM 2 1 7/8 48 4.7 119 2 1/2 1 7/8 48 3.9 99 V-SPEC-2535-001
Sizes: 2, 2-1/2 & 3 GPM: 40.0-200.0 Type: utomatic alancing Model: 2540 Pressure Temperature Ports Outlet FNPT /Outlet Connections 5 GPM Increments Differential Operating Pressure 2 80 PSID 40 170 GPM 3 80 PSID 175 200 GPM Suitable for 400 PSIG Ductile Iron Pressure / Temperature Ports Retainer Cage Holder Center Plate 4 Hole Pattern Size IN MM 2 11.6 295 2 1/2 11.3 287 3 11.2 284 V-SPEC-2540-001
Sizes: 2, 2-1/2, 3 & 4 GPM: 9.00-225.0 Type: utomatic alancing Model: 2545 Pressure Temperature Ports Outlet Flanged /Outlet Connections 1 GPM Increments 9.0 100 GPM 5 GPM Increments 105 225 GPM Flow Cartridges are Not Changeable is Hermetically Sealed Differential Operating Pressure 2 80 PSID Class 150 Flanges 4 olt Flange on 2 3 s 8 olt Flange on 4 s Suitable for 400 PSIG Flange Pressure / Temperature Ports Retainer Cage Holder Center Plate V-SPEC-2545-001 Size 2 2-1/2 3 4 Length/Diameter Flow Rate 9 100 GPM 11.0 6.0 11.3 7.0 11.4 7.5 11.6 9.0 Flow Rate 105 175 GPM 12.0 6.6 12.3 7.0 12.4 7.5 12.6 9.0 Flow Rate 180 225 GPM N/ 13.4 8.6 13.6 9.0
Sizes: 4, 6, 8, & 10 GPM: 120.0-1800 Type: utomatic alancing Model: 2560 *Flanged Shown Flanged*, Grooved or Welded /Outlet Connections 10 GPM Increments Differential Operating Pressure 2 80 PSID 1/4 Extended Pressure / Temperature Ports Suitable for 400 PSIG Flange Rating: 150 lb. dditional Sizes and GPM s vailable, Consult Factory Flange Ext. Pressure / Temperature Ports dapter Plate Retainer Cage Holder Clip Outlet End End (pproximate) Length may vary with GPM selection -Welded C-Flanged D-Grooved End E-Victaulic Ring Dimension Welded & Grooved Size IN MM IN MM IN MM IN MM IN MM 4 9 229 21 7/8 556 22 7/8 970 21 3/8 1232 10 7/8 275 6 11 279 38 3/16 581 38 3/16 989 37 11/16 1251 13 3/4 349 8 13.5 343 38 15/16 543 48 1/2 957 48 1219 17 431 10 16 406 37 11/16 276 48 1/2 349 48 1219 18 15/16 480 V V-SPEC-2560-001
Sizes: 6, 8, 10, 12, 14, 16, 18, 20, 24, 30 & 36 GPM: 120.0-35,000 Type: utomatic alancing Model: 2570 Flanged Outlet Connections 10 GPM Increments Differential Operating Pressure 2 80 PSID Where Not Limited y pplication Operating Temperature Range 32 to 225 F 1/8 Pressure / Temperature Ports Suitable for 400 PSIG Standard Flanges Per NSI 16.5 Flange Rating: 150 lb. 1/8 Extended Pressure / Temperature Ports dditional Sizes and Custom Flanges vailable, Consult Factory Flange Pressure / Temperature Ports End Plate Retainer Cage Holder 8 olt Flange (pproximate) Length may vary with GPM selection IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM Size 6 152 8 203 10 254 12 305 14 356 16 406 18 457 20 508 24 610 1 25 1-1/8 29 1-3/16 30 1.25 32 1-3/8 35 1-7/16 37 1-9/16 40 1-11/16 43 1-7/8 48 11 279 13.5 343 16 406 19 483 21 533 23.5 597 25 636 27.5 699 32 813 C 13 330 29 737 38.5 978 52 1321 60 1524 68 1727 60 1524 52 1321 67 1702 IN MM IN MM Size 30 762 36 914 2-15/16 75 3-9/16 90 38.75 984 46 1168 C 82 2083 82 2083 V-SPEC-2570-001
Sizes: 1/2, & 3/4 GPM: 0.50-9.00 Type: utomatic alancing Model: 2511 Outlet FSWT / Outlet Connections 2 80 PSID Range vailable in 4 or 5 1/2 Lengths Suitable for 522 PSIG Copper Retainer 1/2 3/4 4 (114) 5 1/2 (140) 4 (114) 5 1/2 (140) IN MM IN MM IN MM IN MM 3.0 76 4.5 114 3.0 76 4.5 114 0.63 16 0.63 16 0.88 22 0.88 22 C 1.4 36 1.4 36 1.4 36 1.4 36 V V-SPEC-2511-001
Sizes: 3/4 & 1 GPM: 9.00-24.0 Type: utomatic alancing Model: 2521 FSWT / Outlet Connections 2 80 PSID Range 9.00 20.0 GPM 3 80 PSID Range 22.0 24.0 GPM Suitable for 522 PSIG Copper Retainer Cage Holder Cartridge Holder Size 3/4 (19) 1 (25) IN MM IN MM 6.0 152 6.0 152 2.1 53 2.1 53 C.88 22 1.13 29 V-SPEC-2521-001