Rotary Cutters DB(M)2660 37399 316-317P Parts Manual Read the Operator's Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious - follow without exception. Your life and the lives of others depend on it! Copyright 2018 Printed 07/10/18 Cover photo may show optional equipment not supplied with standard unit.
Table of Contents Section 1: Introduction...4 Using This Manual...4 Manual Replacement Information...4 Manual Revisions...4 Touch-up Paint...4 Hardware Legend...5 Replacement Hardware...5 Serial Numbers...5 Part Number Service Coding...5 Section 2: Frames...6 Extension Arm Assembly...6 Hitch & Reservoir Assembly...8 Light Kit DB2660...10 Weight Hangers...12 Section 3: Deck...14 Blade Drive...14 Deck Link & Cylinder...16 Spindle Hub Assembly (826-110C)...18 Section 4: Guards...20 Guard: Front Rubber...20 Guard: Front Single & Double Chain...22 Guard: Rear Rubber...24 Guard: Rear Single & Double Chain S/N 1058899-...26 Guard: Rear Single & Double Chain S/N 1058900+...28 Section 5: Hydraulics & Cylinders...30 Cylinders & Hoses...30 Deck Motor Hydraulics...32 Hydraulic Cylinder (810-312C) Lion...34 Hydraulic Cylinder (810-944C) Lion...36 Hydraulic Gear Increaser 1000 RPM (826-138C) Bondioli...38 Hydraulic Gear Increaser 1000 RPM (826-492C) Bondioli...40 Hydraulic Gear Increaser 1000 RPM (826-492C) Comer..42 Hydraulic Gear Increaser 540 RPM (826-108C) Bondioli..44 Hydraulic Gear Increaser 540 RPM (826-108C) Comer...46 Hydraulic Gear Increaser 540 RPM (826-493C) Bondioli..48 Hydraulic Gear Increaser 540 RPM (826-493C) Comer...50 Hydraulic Motor Ultra (810-314C)...52 Hydraulic Pump Ultra (810-208C)...54 Speed Increaser: Ditch Bank Mount...56 Speed Increaser: Tractor Mount...58 Section 6: Drivelines...60 Driveline 1000 (826-791C) Comer...60 Driveline 540 (826-790C) Comer...62 Section 7: Options & Accessories...64 Gauge Wheel Components: Side Wheel...64 Gauge Wheel Components: Tail Wheel...66 Hub Assembly 4-Bolt W/ Zerk & Studs (815-092C)...68 SMV Sign...70 Section 8: Decals...72 Decal Placement...72 Touch-up Paints...74...76 Copyright 2018. All rights reserved. provides this publication as is without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. The illustrations in this manual are not intended for safe and proper assembly or disassembly of equipment. The illustrations are intended for ordering parts only. is registered trademark. All other brands and product names are trademarks or registered trademarks of their respective holders. Printed in the United States of America. 2 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Alphabetized Table of Contents B C D E G H L S Blade Drive...14 Cylinders & Hoses...30 Decal Placement...72 Deck Link & Cylinder...16 Deck Motor Hydraulics...32 Driveline 1000 (826-791C) Comer...60 Driveline 540 (826-790C) Comer...62 Extension Arm Assembly...6 Gauge Wheel Components: Side Wheel...64 Gauge Wheel Components: Tail Wheel...66 Guard: Front Rubber...20 Guard: Front Single & Double Chain...22 Guard: Rear Rubber...24 Guard: Rear Single & Double Chain S/N 1058899-...26 Guard: Rear Single & Double Chain S/N 1058900+...28 Hitch & Reservoir Assembly...8 Hub Assembly 4-Bolt W/ Zerk & Studs (815-092C)...68 Hydraulic Cylinder (810-312C) Lion...34 Hydraulic Cylinder (810-944C) Lion...36 Hydraulic Gear Increaser 1000 RPM (826-138C) Bondioli...38 Hydraulic Gear Increaser 1000 RPM (826-492C) Bondioli...40 Hydraulic Gear Increaser 1000 RPM (826-492C) Comer...42 Hydraulic Gear Increaser 540 RPM (826-108C) Bondioli...44 Hydraulic Gear Increaser 540 RPM (826-108C) Comer...46 Hydraulic Gear Increaser 540 RPM (826-493C) Bondioli...48 Hydraulic Gear Increaser 540 RPM (826-493C) Comer...50 Hydraulic Motor Ultra (810-314C)...52 Hydraulic Pump Ultra (810-208C)...54 Touch-up Paints...74 Light Kit DB2660...10 SMV Sign...70 Speed Increaser: Ditch Bank Mount...56 Speed Increaser: Tractor Mount...58 Spindle Hub Assembly (826-110C)...18 W Weight Hangers...12 07/10/18 DB(M)2660 Rotary Cutters 316-317P 3
4 DB(M)2660 Rotary Cutters 316-317P 07/10/18
07/10/18 DB(M)2660 Rotary Cutters 316-317P 5
Extension Arm Assembly Section 2: Frames 37429 6 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Extension Arm Assembly Section 2: Frames Ref. Part No. Part Description Comments Revision 5. 6. 7. dwg37429 316-299H 800-080C 802-012C 803-011C 804-036C 816-833C 890-126C Drawing Image Number EXTENSION ARM GREASE ZERK 1/4-28 THD FORMING HHCS 5/16-18X1 1/2 GR5 NUT LOCK 5/16-18 PLT WASHER FLAT 5/16 SAE PLT URETHANE BUMPER BUSHING PIVOT PIN 1 1/2 ID 07/10/18 DB(M)2660 Rotary Cutters 316-317P 7
Hitch & Reservoir Assembly Section 2: Frames 37400 8 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hitch & Reservoir Assembly Section 2: Frames Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 Dwg 37400 300-318D 312-821D 316-099D 316-100D 316-153H 316-293H 800-001C 800-066C 802-017C 802-092C 802-098C 803-038C 803-177C 804-012C 804-013C 805-103C 805-175C 816-643C 829-012C 890-401C 891-149C Image No. HITCH BUSHING BSHG 1 1/4ODX1 1/32IDX2 1/16LG PIN HTCH C2-C3 10.25 L HITCH SPACER WLDMT. PARKING STAND HITCH AND RESERVOIR WELD. DB GREASE ZERK STRAIGHT 1/4-28 DRAIN PLUG 3/4-16 UNF PLATED HHCS 3/8-16X1 GR5 RHSNB 5/16-18X3/4 GR5 HHCS 1-8X4 1/2 GR5 NUT HEX 1-8 NYLON INSERT PLT NUT HEX FLG TP LK 5/16-18ZNYCR WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT PIN LINCH 7/16 X 1 3/4 PIN HTCH DTNT.63X75 USBL COVER GASKET HRS VALVE 1 1/4FNPT BALL POLYPROP SMV MOUNTING SOCKET FILLER CAP W/STRAINER ASSY 07/10/18 DB(M)2660 Rotary Cutters 316-317P 9
Light Kit DB2660 Table of Contents Section 2: Frames 70035 10 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Light Kit DB2660 Section 2: Frames Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 1 1 1 1 1 1 15. Dwg 70035 316-385L 316-386H 800-060C 802-005C 803-014C 803-255C 803-268C 804-007C 804-013C 806-051C 842-265C 891-522C J-37-R J-37-A J-AC1-15-B 891-523C J-37-R J-37-A J-AC1-15-B 891-531C 891-784C 891-786C Image No. DB26 LIGHT KIT * WELDED LIGHT BRACKET CABLE TIE.19X125 3DIA 50LB HHCS 1/4-20X1 GR5 NUT HEX 3/8-16 PLT NUT HEX NYLOCK 1/4-20 NUT HEX NYLOCK 10-24 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 3/8 PLT U-BOLT 3/8-16 X 6 1/32 X 7 HHCS #10-24X1 GR5 DUAL LED LIGHT LH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER DUAL LED LIGHT RH RED LED LENS MODULE AMBER LED LENS MODULE BLACK LENS COVER ENHANCE MODULE LIGHT WIRE HARNESS 5' LEAD WIRE HARNESS 5' Complete light assembly Red lens Amber lens Black lens Complete light assembly Red lens Amber lens Black lens 07/10/18 DB(M)2660 Rotary Cutters 316-317P 11
Weight Hangers Table of Contents Section 2: Frames 30125 12 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Section 2: Frames Weight Hangers Table of Contents Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 2 25. 26. 27. 28. dwg30125 316-276A 316-233A 316-234A 316-232A 316-231A 316-230A 316-225H 316-226H 316-227H 316-228H 316-235H 316-277H 316-302D 316-304D 316-305D 316-312D 316-372D 802-034C 802-091C 802-224C 802-449C 803-024C 803-255C 803-342C 803-169C 804-007C 804-022C 805-143C 816-504C Drawing Image Number WEIGHT HANGER ASSY KUBOTA WEIGHT HANGER ASSY CASE/IH WEIGHT HANGER ASSY NH WEIGHT HANGER ASSY IH WEIGHT HANGER ASSY CASE WEIGHT HANGER ASSY JD WEIGHT HANGER JD WEIGHT HANGER CASE WEIGHT HANGER IH WEIGHT HANGER CASE/IH WEIGHT HANGER WELDMENT NH WEIGHT HANGER, KUBOTA WEIGHT RETAINER PIN LG WEIGHT RETAINER PIN C/IH LG WEIGHT BOX SPACER WEIGHT RETAINER PIN NH KUBOTA WEIGHT RETAINER HHCS 1/2-13X1 1/4 GR5 HHCS 1/2-13X1 1/2 GR5 HHCS 1/4-20X1 1/4 GR5 RHSNB 5/8-11X3 1/2 GR5 NUT LOCK 5/8-11 PLT NUT HEX NYLOCK 1/4-20 NUT HEX TOP LOCK 1/2-13 PLT NUT HEX FLG LOCK 1/2-13 PLT WASHER FLAT 1/4 SAE PLT WASHER LOCK SPRING 5/8 PLT PIN HAIR COTTER.120 PLT MANUAL STORAGE CONTAINER S/N 908310+ S/N 908309-07/10/18 DB(M)2660 Rotary Cutters 316-317P 13
Blade Drive Table of Contents Section 3: Deck 37402 14 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Section 3: Deck Blade Drive Table of Contents Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. Dwg 37402 82200555 84700146 139710100 316-124H 802-038C 802-277C 803-020C 803-170C 803-263C 804-015C 804-147C 810-314C 811-411C 816-182C 820-112C 826-110C 842-237C Drawing Image Number CO NUT, CASTLE M30 X 2 CO COTTER PIN B6 X 60 CO BLANK WASHER DISHPAN WELDMENT SPCL-HUB HHCS 1/2-13X2 1/4 GR5 BLD BLT 1 1/8-12X44 W/.25KEY NUT HEX 1/2-13 PLT NUT HEX TOP LOCK 1 1/8-12 PLT NUT HEX FLANGE LOCK 5/8-11 PLT WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1" HARDENED HYD MOTOR ULTRA #3ML180A5792 EL 1 1/16MJIC 1 1/16MORB GASKET - MOTOR CUTTER BLADE 1/2X4X25 CW SPINDLE HUB ASSY HFS 5/8-11X2 GR8 07/10/18 DB(M)2660 Rotary Cutters 316-317P 15
Deck Link & Cylinder Section 3: Deck 37417 16 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Deck Link & Cylinder Section 3: Deck Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. 26. 27. 28. dwg37417 316-034D 316-302H 316-306H 316-324H 316-400D 316-422D 316-423D 316-430D 316-431D 316-432D 326-221D 800-080C 802-079C 802-197C 802-281C 802-603C 803-013C 803-177C 803-198C 803-231C 803-271C 804-012C 804-013C 804-029C 805-004C 805-017C 810-312C 890-005C Drawing Image Number TRANSPORT CHAIN DB2660 DECK WELDMENT EXTENSION ARM LINK LINK PIVOT PIN BLADE BOLT ACCESS COVER NARROW DECK ANGLE LINKAGE TUBE RND 1 1/4X9/32WX06 DECK PIVOT PIN PIN CLVS 0X78 USBL GRS PIN CLVS 0X22 USBL GRS SKID SHOE GREASE ZERK 1/4-28 THD FORMING HHCS 3/8-16X1 1/4 GR5 HHCS 5/16-18X2 3/4 GR5 HHCS 5/8-11X2 3/4 GR5 PLOW 3/8-16X1 GR5 NUT LOCK 3/8-16 PLT NUT HEX FLG TP LK 5/16-18ZNYCR NUT HEX WHIZ 3/8-16 PLT NUT WING 3/8-16 PLT NUT HEX TOP LOCK 5/8-11 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 3/8 PLT WASHER FLAT 1 SAE PIN CLVS 0X75 USBL PIN COTTER 3/16 X 1 3/4 PLT CYL 3X12X25 ROD (TIE ROD) BUSHING CYL 1 1/4 X 1 X 1 07/10/18 DB(M)2660 Rotary Cutters 316-317P 17
Spindle Hub Assembly (826-110C) Section 3: Deck 12276 18 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Spindle Hub Assembly (826-110C) Section 3: Deck Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 Dwg 12276 8.00555 0.139.71000 0.139.7100.00 8.7.01107 8.7.00146 0.773000.00 822-214C 0.7713000 8.6.5.00006 8.0.9.00143 0.278.71000 826-110C Drawing Image Number CO NUT, CASTLE M30 X 2 CO BLANK WASHER CO SEAL RETAINER CO SEAL CO COTTER PIN B6 X 60 CO SPLINE SHAFT BRG CUP/CONE SET 30210 CO SPINDLE HOUSING CO OIL PLUG 3/8 CO BEARING 30209 RTA25 CO NUT LOCK M45 X 5 SPINDLE HUB ASSY 07/10/18 DB(M)2660 Rotary Cutters 316-317P 19
Guard: Front Rubber Section 4: Guards 37403 20 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Guard: Front Rubber Section 4: Guards Ref. Part No. Part Description Comments Revision 5. 6. dwg37403 312-844A * 326-214D 326-215D 802-015C 803-198C 816-437C 816-438C Drawing Image Number FRONT RUBBER COMPLETE FLAT STRAP FLAT STRAP RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT RUBBER DEFLECTOR RUBBER DEFLECTOR 07/10/18 DB(M)2660 Rotary Cutters 316-317P 21
Guard: Front Single & Double Chain Section 4: Guards 37404 22 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Guard: Front Single & Double Chain Section 4: Guards Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. dwg37404 312-845A 316-319A * 326-219D 326-220D 326-223D 326-224D 802-015C 803-198C 890-341C 890-485C Drawing Image Number FRONT CHAIN GUARD COMPLETE FRONT DOUBLE CHAIN GUARD FRONT CHAIN GUARD BRKT. CTR. FRONT CHAIN GUARD BRKT. OUT. ROUND ROD.25 X 37.29 ROUND ROD.25 X 16.50 RHSNB 3/8-16X1 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 3 LINK SINGLE CHAIN DOUBLE CHAN 07/10/18 DB(M)2660 Rotary Cutters 316-317P 23
Guard: Rear Rubber Section 4: Guards 37405 24 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Guard: Rear Rubber Section 4: Guards Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. dwg37405 316-336A * 312-948D 312-952D 312-953D 316-462D 802-015C 802-017C 802-453C 802-647C 803-198C 816-310C Drawing Image Number REAR RUBBER GUARD DEFLECTOR SPACER REAR RUBBER DEF. RCR15 & 1660 DEFLECTOR STRAP RCR15 & 1660 REAR GUARD BRACKET RHSNB 3/8-16X1 GR5 HHCS 3/8-16X1 GR5 RHSNB 3/8-16X1 1/2 GR5 RHSNB 3/8-16X3 1/2 GR5 NUT HEX WHIZ 3/8-16 PLT RUBBER DEFLECTOR RCR15 & 1660 07/10/18 DB(M)2660 Rotary Cutters 316-317P 25
Guard: Rear Single & Double Chain S/N 1058899- Section 4: Guards 37406 26 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Guard: Rear Single & Double Chain S/N 1058899- Section 4: Guards Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. Dwg 37406 316-335A 316-318A * 312-948D 316-462D 326-181D 326-182D 802-015C 802-017C 802-647C 803-198C 890-341C 890-485C Drawing Image Number REAR CHAIN GUARD REAR DOUBLE CHAIN GUARD DEFLECTOR SPACER REAR GUARD BRACKET REAR CHAINGUARD BRACKET CHAIN ROD 1/4 X 56 RHSNB 3/8-16X1 GR5 HHCS 3/8-16X1 GR5 RHSNB 3/8-16X3 1/2 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 3 LINK SINGLE CHAIN DOUBLE CHAIN 07/10/18 DB(M)2660 Rotary Cutters 316-317P 27
Guard: Rear Single & Double Chain S/N 1058900+ Section 4: Guards 39909 28 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Guard: Rear Single & Double Chain S/N 1058900+ Section 4: Guards Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. Dwg 37406 316-335A 316-318A * 312-948D 326-181D 326-182D 802-015C 802-647C 803-198C 890-341C 890-485C Drawing Image Number REAR CHAIN GUARD REAR DOUBLE CHAIN GUARD DEFLECTOR SPACER REAR CHAINGUARD BRACKET CHAIN ROD 1/4 X 56 RHSNB 3/8-16X1 GR5 RHSNB 3/8-16X3 1/2 GR5 NUT HEX WHIZ 3/8-16 PLT CHAIN WELD 5/16 GR 43 X 5 LINK CHAIN WELD 5/16 GR 43 X 3 LINK Single chain Double chain Redesigned part 07/10/18 DB(M)2660 Rotary Cutters 316-317P 29
Cylinders & Hoses Section 5: Hydraulics & Cylinders 37428 30 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Cylinders & Hoses Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 dwg37428 805-004C 805-017C 810-312C 810-944C 811-065C 811-337C 811-394C 841-189C 841-190C 851-288C 851-289C 851-406C Drawing Image Number PIN CLVS 0X75 USBL PIN COTTER 3/16 X 1 3/4 PLT CYL 3X12X25 ROD (TIE ROD) CYL 2X32X25 - WELDED EL 9/16MJIC 9/16MORB OREL 1/16 9/16MJIC 9/16MORB CP 3/4FORB MALE QD POPPET TYPE HH3/8R2 074 3/4MORB 9/16FJIC HH3/8R2 087 3/4MORB 9/16FJIC HH3/8R2 112 3/4MORB 9/16FJIC HH3/8R2 125 3/4MORB 9/16FJIC ORAD 1/16 9/16MORB 9/16MJIC 07/10/18 DB(M)2660 Rotary Cutters 316-317P 31
Deck Motor Hydraulics Section 5: Hydraulics & Cylinders 37425 32 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Deck Motor Hydraulics Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. dwg37425 316-106D 502-068D 802-115C 803-084C 811-133C 811-169C 811-170C 811-411C 811-800C 841-080C 841-391C 841-392C 851-287C 851-287C 851-290C 851-359C Drawing Image Number BUSH.54 OD X 0.36 ID X 3/4LG HYD HOSE CLAMP BRACKET HHCS 5/16-18X2 GR5 NUT HEX NYLOCK 5/16-18 PLT AD 9/16MJIC 3/4MORB EL 9/16MJIC 9/16FJIC AD 9/16MORB 9/16MJIC EL 1 1/16MJIC 1 1/16MORB HH3/8R1 106 9/16FJIC AD 9/16MJIC BLKHD WITH LN AD BKHD 1 1/16MJIC NUT LOCK 1 1/16-12 BULKHEAD HH3/4R17 075 06FJIC 2-90 HH3/4R17 075 06FJIC 2-90 HH3/8R1 069 9/16FJIC TUFF COAT HH3/4R9 103 06FJIC 07/10/18 DB(M)2660 Rotary Cutters 316-317P 33
Hydraulic Cylinder (810-312C) Lion Section 5: Hydraulics & Cylinders 25902 34 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Cylinder (810-312C) Lion Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. Dwg 25902 810-312C 803-020C 130560 801-023C 186561 N/A N/A N/A N/A N/A N/A 258821 491742 492282 492652 492721 494383 492870 810-887C Drawing Image Number CYL 3X12X25 ROD (TIE ROD) * NUT HEX 1/2-13 PLT MON PISTON NUT SCREW SET SH 3/8-16X3/8 TYPE C PLUG 9/16-18UNF MORB SOCKET HD MON ROD SEAL MON PISTON SEAL (PSP) MON END CAP B/U WASHER MON END CAP O-RING SEAL WIPER ROD MON PISTON WEAR RING MON PISTON 00-0-TSS-ISO-WR MON CYL TUBE MON TIE ROD LION ROD CLEVIS 1 1/4 (1PIN) LION CLEVIS CAP 0-9/16 ORB MON ROD CAP00-25-9/16ORBTS MON CYL ROD MON SEAL KIT 661702 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 Only Found in Kit #18 07/10/18 DB(M)2660 Rotary Cutters 316-317P 35
Hydraulic Cylinder (810-944C) Lion Section 5: Hydraulics & Cylinders No diagram associated with this Parts List 36 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Cylinder (810-944C) Lion Section 5: Hydraulics & Cylinders No Parts List associated with this diagram 07/10/18 DB(M)2660 Rotary Cutters 316-317P 37
Hydraulic Gear Increaser 1000 RPM (826-138C) Bondioli Section 5: Hydraulics & Cylinders 37457 38 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 1000 RPM (826-138C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. Dwg 37457 826-138C 20700542 20700109 20700109 207010.542 207009.426 8050.505.000 8050.576.000 8125.418.001 8200.28000 8200.308.000 8225.248.000 8575.267.000 8600.14000 8600.149.000 8600.390.000 8600.670.000 8625.140.000 8675.188.100 8675.20100 8075.200.000 Image No. GEARBOX FR3 1:2 SPEEDUP BONDIOLI BONDI SHAFT BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 RPBY 9110.345.000 BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI PIN, 6X10 UNI 1707 BONDI OIL PLUG, VENT BONDI OIL PLUG BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL SEAL 19X13X3 07/10/18 DB(M)2660 Rotary Cutters 316-317P 39
Hydraulic Gear Increaser 1000 RPM (826-492C) Bondioli Section 5: Hydraulics & Cylinders 37452 40 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 1000 RPM (826-492C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 Dwg 37452 826-492C 207048.542 207007.042 20700109 20700109 207010.542 207009.426 8025.418.000 8050.505.000 8050.576.000 8125.418.001 8200.28000 8200.308.000 8225.248.000 8375.710.000 8525.350.000 8575.267.000 8075.200.000 8600.148.000 8600.390.000 8600.670.000 8625.140.000 8675.188.100 8675.20100 8600.14000 Image No. GEARBOX FR3 1:18 SPEEDUP BONDIOLI BONDI SHAFT 1-3/8 Z21 BONDI SLEEVE BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI CIRCLIP DIA 50E BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 RPBY 9110.345.000 BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI SPRING BONDI BALL 1/2" BONDI PIN, 6X10 UNI 1707 BONDI OIL SEAL 19X13X3 BONDI OIL PLUG 3/8" GAS BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL PLUG, VENT 07/10/18 DB(M)2660 Rotary Cutters 316-317P 41
Hydraulic Gear Increaser 1000 RPM (826-492C) Comer Section 5: Hydraulics & Cylinders 37450 42 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 1000 RPM (826-492C) Comer Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 Dwg 37450 826-492C 13500009 8.0.00715 8.00382 8.00197 9510.090.000 8.0.01353 8.7.00490 135030.042 8.7.02206 8.7.0.01148 135015.076 8.0.00473 13500009 8.01273 8.6.8.01194 13501026 8.6.5.00447 135068.042 8.01256 9010.320.000 8.5.9.00265 13503076 9290.225.000 Image No. GEARBOX FR3 1:18 SPEEDUP COMER CO INPUT HOUSING CO BEARING 6009 COMER HEX NUT M8 UNI CO BOLT M8X25 8,8 CO METAL BREATHER 3/8 G CO BOLT WASHER 17X22X5 CO OIL SEAL 45X65X8 CO PINION (1000 RPM) CO OIL SEAL 50X68X8 CO OIL SEAL PLUG 40 X 7 CO SPACER RPBY 822-306C CO COVER CO SPRING 6X12UNII707 CO MAGNETIC PLUG 3/8 G NA36/A CO RING GEAR (1000 RPM) CO OIL FILLER PLUG TSN 3/8" CO SHAFT CO PARALLEL KEY B 12X8X20 CO EXTERNAL SNAP RING 48 CO BALL 3/8 9,52MM CO RETAINING RING CO SPRING 50.5X29.5 07/10/18 DB(M)2660 Rotary Cutters 316-317P 43
Hydraulic Gear Increaser 540 RPM (826-108C) Bondioli Section 5: Hydraulics & Cylinders 35078 44 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 540 RPM (826-108C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. dwg35078 826-108C 20700542 20700109 20700109 207010.542 20700426 8050.505.000 8050.576.000 8125.418.001 9110.345.000 8200.308.000 8225.248.000 8575.267.000 8600.14000 8600.149.000 8600.390.000 8600.670.000 8625.140.000 8675.188.100 8675.20100 8075.200.000 Drawing Image Number GEARBOX FR3 1:7 SPEED UP * BONDI SHAFT BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 CO BALL BRG 6009 45X75X16 BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI PIN, 6X10 UNI 1707 BONDI OIL PLUG BONDI OIL PLUG BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL SEAL 19X13X3 07/10/18 DB(M)2660 Rotary Cutters 316-317P 45
Hydraulic Gear Increaser 540 RPM (826-108C) Comer Section 5: Hydraulics & Cylinders 12301 46 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 540 RPM (826-108C) Comer Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. dwg12301 826-108C 13500009 9120.215.000 9510.106.000 9020.365.000 9110.385.000 135006.041 9050.25000 13501026 13501076 9490.310.000 13500009 9540.25080 9020.355.000 9110.345.000 135010.042 9510.560.000 9510.090.000 9510.105.500 Drawing Image Number GEARBOX FR3 1:7 SPEED UP CO INPUT HOUSING NUT, M8 UNI 5588 A6S MEDIUM CO MAGNETIC PLUG 3/8 G NA36/A CO SEAL, OIL 50X68X8 DIN3760 CO BALL BEARING 6010 50X80X16 CO INPUT SHAFT CO STEEL KEY 12 X 8 X 20 CO RING GEAR 60T M=75R1:75 CO SPACER CO CYLINDRIC PIN 6X12 UNI 1707 CO COVER CO V.T.C.E.I. M8X25 UNI5931-8G CO OIL SEAL 45X65X8 DIN 3760 CO BALL BEARING 6009 45X75X16 C0 PINION 16T M=75 CO OIL SEAL PLUG 40 X 7 CO METAL BREATHER 3/8 G CO OIL DRAIN PLUG 3/8 G AVP * Notes: Oil Type 80-90W Capacity 1 Pints 07/10/18 DB(M)2660 Rotary Cutters 316-317P 47
Hydraulic Gear Increaser 540 RPM (826-493C) Bondioli Section 5: Hydraulics & Cylinders 37455 48 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 540 RPM (826-493C) Bondioli Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 Dwg 37455 826-493C 207006.542 207007.042 20700109 20700109 20700542 20700426 8025.418.000 8050.505.000 8050.576.000 8125.418.001 8200.28000 8200.308.000 8225.248.000 8375.710.000 8525.350.000 8575.267.000 8075.200.000 8600.148.000 8600.390.000 8600.670.000 8625.140.000 8675.188.100 8675.20100 8600.14000 Image No. GEARBOX FR3 1:75 SPEEDUP BONDIOLI BONDI SHAFT BONDI SLEEVE BONDI HOUSING BONDI HOUSING BONDI SHAFT BONDI GEAR BONDI CIRCLIP DIA 50E BONDI OIL SEAL 45X62X7 BONDI OIL SEAL 50X62X7 BONDI KEY14X9X30 RPBY 9110.345.000 BONDI BEARING 6010 BONDI NUT M8 UNI 5588 BONDI SPRING BONDI BALL 1/2" BONDI PIN, 6X10 UNI 1707 BONDI OIL SEAL 19X13X3 BONDI OIL PLUG 3/8" GAS BONDI CUP RCA 35 BONDI CAP RCA 62 BONDI 3/8 OIL PLUG BONDI SCREW M8X25 UNI 5931 BONDI SCREW M8X65 UNI 5931 BONDI OIL PLUG, VENT 07/10/18 DB(M)2660 Rotary Cutters 316-317P 49
Hydraulic Gear Increaser 540 RPM (826-493C) Comer Section 5: Hydraulics & Cylinders 37456 50 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Gear Increaser 540 RPM (826-493C) Comer Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 Dwg 37456 826-493C 13500009 8.0.00715 8.00382 8.00197 9510.090.000 8.0.01353 8.7.00490 135030.042 8.7.02206 8.7.0.01148 135015.076 8.0.00473 13500009 8.01273 8.6.8.01194 13501026 8.6.5.00447 135068.041 8.01256 9010.320.000 8.5.9.00265 13503076 9290.225.000 Image No. GEARBOX FR3 1:75 SPEEDUP CO INPUT HOUSING CO BEARING 6009 COMER HEX NUT M8 UNI CO BOLT M8X25 8,8 CO METAL BREATHER 3/8 G CO BOLT WASHER 17X22X5 CO OIL SEAL 45X65X8 CO PINION (1000 RPM) CO OIL SEAL 50X68X8 CO OIL SEAL PLUG 40 X 7 CO SPACER RPBY 822-306C CO COVER CO SPRING 6X12UNII707 CO MAGNETIC PLUG 3/8 G NA36/A CO RING GEAR (1000 RPM) CO OIL FILLER PLUG TSN 3/8" CO SHAFT CO PARALLEL KEY B 12X8X20 CO EXTERNAL SNAP RING 48 CO BALL 3/8 9,52MM CO RETAINING RING CO SPRING 50.5X29.5 07/10/18 DB(M)2660 Rotary Cutters 316-317P 51
Hydraulic Motor Ultra (810-314C) Section 5: Hydraulics & Cylinders 13250 52 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Motor Ultra (810-314C) Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 5. 6. 7. dwg13250 810-314C 471413 7113-023-0N0 Drawing Image Number HYD MOTOR ULTRA #3ML180A5792 BODY O-RING BACK-UP RING BACK-UP SEAL LOBE SEAL SHAFT SEAL FED. MOGUL SEAL 25X756X.25 CIRCLE CLIP ULTRA MOTOR SEAL KIT Not sold separately Not sold separately Not sold separately Not sold separately Not sold separately Alternate replacement seal Not sold separately Includes one of items 5 & 6 and two of items 1 through 4 07/10/18 DB(M)2660 Rotary Cutters 316-317P 53
Hydraulic Pump Ultra (810-208C) Section 5: Hydraulics & Cylinders 13249 54 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hydraulic Pump Ultra (810-208C) Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. dwg13249 810-208C 8682-023-00N 9222-361-00D 9116-003-00D 8682-023-T4N Drawing Image Number HYD PUMP ULTRA #2PR029C4599W SEAL ENERGIZER SEAL ELEMENT BODY O-RING CIRCLE CLIP WOODRUFF KEY ULTRA PUMP SEAL KIT WASHER LOCK M14 (DIN 127B) PLT NUT JAM M14X5 DIN 936 PLT ULTRA PUMP SEAL KIT,KEY,LN, LW Not Sold Separately Not Sold Separately Not Sold Separately Not Sold Separately Not Sold Separately Includes one of items 3, 4 & 5 and two of items 1 & 2 Includes 1 ea. 5,6,7 & 8 07/10/18 DB(M)2660 Rotary Cutters 316-317P 55
Speed Increaser: Ditch Bank Mount Section 5: Hydraulics & Cylinders 37421 56 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Speed Increaser: Ditch Bank Mount Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 dwg37421 316-300A 316-321A * 802-458C 802-540C 804-015C 804-077C 810-208C 810-212C 810-295C 811-408C 811-409C 811-410C 811-567C 826-108C 826-138C 826-109C 826-790C 826-791C 841-241C 841-242C 841-269C 841-438C 841-446C 851-359C 890-454C 890-455C Drawing Image Number DB MNT 540 SPD INC W/PUMP/PTO DB MNT 1000 SPD INC W/PUMP/PTO HHCS M12X75X30 GR8.8 HSHCS M10X5X40 GR8.8 WASHER LOCK SPRING 1/2 PLT WASHER LOCK M10 BLK HYD PUMP ULTRA #2PR029C4599W 3250 PRESSURE RELIEF VALVE PRESS. GAUGE SERVICE FILTER AD 1 1/16MORB 1 1/16MJIC AD 1 5/8MJIC 1 1/4MNPT AD 1 1/16MORB 1 1/16MORB AD 1 1/16MJIC 1 5/16MORB GEARBOX FR3 1:7 SPEED UP GEARBOX FR3 1:2 SPEEDUP GEAR 35 X 31 Z 18 SPLINE DRVLN CAT4 38-6X38-6 NO C DRVLN CAT4 38-21X38-6 NO C EL 1 5/8-12MJIC 1 5/16MORB HH1 1/4R4 20.5 1 5/8FJIC 1-90 TEE 06FJIC 06MJIC 06MJIC EL 1 1/16MJIC 1 1/16 FJIC SWPT HH3/4R1 1 1/16FJIC HH3/4R9 103 06FJIC SPIN-ON RETURN FILTER 1 1/2-16 SPIN-ON FILTER HEAD 1 5/16-12 540 RPM 1000 RPM 540 RPM 1000 RPM 540 RPM 1000 RPM 07/10/18 DB(M)2660 Rotary Cutters 316-317P 57
Speed Increaser: Tractor Mount Section 5: Hydraulics & Cylinders 37422 58 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Speed Increaser: Tractor Mount Section 5: Hydraulics & Cylinders Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 18. 19. 20. 2 2 2 2 25. 26. dwg37422 316-322A 316-323A * 316-412D 316-459D 800-392C 802-079C 802-458C 802-540C 803-013C 804-012C 804-015C 804-077C 810-208C 810-212C 810-295C 811-410C 811-411C 811-567C 826-109C 826-493C 826-492C 841-269C 841-398C 851-306C 851-307C 851-519C 851-520C 890-454C 890-455C Drawing Image Number TRACT0R MT 540 SPD INC W/PUMP TRACTOR MT 1000 SPD INC W/PUMP SPEED INCREASER MOUNTING PLATE CHAIN, PUMP TORQUE S-HOOK #526.249 X 00 HHCS 3/8-16X1 1/4 GR5 HHCS M12X75X30 GR8.8 HSHCS M10X5X40 GR8.8 NUT LOCK 3/8-16 PLT WASHER FLAT 3/8 SAE PLT WASHER LOCK SPRING 1/2 PLT WASHER LOCK M10 BLK HYD PUMP ULTRA #2PR029C4599W 3250 PRESSURE RELIEF VALVE PRESS. GAUGE SERVICE FILTER AD 1 1/16MORB 1 1/16MORB EL 1 1/16MJIC 1 1/16MORB AD 1 1/16MJIC 1 5/16MORB GEAR 35 X 31 Z 18 SPLINE GEARBOX FR3 1:75 SPEEDUP GEARBOX FR3 1:18 SPEEDUP TEE 06FJIC 06MJIC 06MJIC HH3/4R1 123 06FJIC06FJIC90 HH3/4R1 060 06FJIC HH1 1/4R4 041 63FJIC 1-90 AD 1 5/8MJIC 1 5/16MORB EL 1 5/8MJIC 1 1/4MNPT SPIN-ON RETURN FILTER 1 1/2-16 SPIN-ON FILTER HEAD 1 5/16-12 540 RPM 1000 RPM 540 RPM 1000 RPM 07/10/18 DB(M)2660 Rotary Cutters 316-317P 59
Driveline 1000 (826-791C) Comer Section 6: Drivelines 37459 60 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Driveline 1000 (826-791C) Comer Section 6: Drivelines Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. 26. 27. 28. 29. 30. Dwg 37459 826-791C 14025.361 180.015.130 15015.011 15015.011 190.000.016 180.015.279 15150.4140710 15150.108 190.000.394 15015.011 14025.361 180.015.288 180.01240 180.015.289 180.016.790 14250.3847521 190.000.451 15016.486 180.016.487 180.016.483 190.000.078 12025.647.11 12025.646.11 14256.0757521 14257.0757521 12350.197.11 12450.338.11 190.000.098 190.000.099 165.000.628 190.000.912 Image No. DRVLN CAT4 38-21X38-6 NO C CO COMPLETE COLLAR YOKE C13 COMER CROSS JOURNAL SET RPBY 15015.011 COMER OUTER YOKE COMER ROLL PIN, INNER TUBE CO BUSH WITH GREASE FITTING CO COMPLETE OUTER TUBE COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE CO INNER YOKE CO COMPLETE COLLAR YOKE C12 CO GUARD RETAIN. COLLAR O.T. COMER BOLT CO GUARD RETAIN. COLLAR I.T. CO SAFTEY CHAINS CO COMPLETE GUARD W/MANUAL COMER OUTER CIRCLIP COMER SLIDING SLEEVE COLLER COMER SPRING COMER FIXED SLEEVE COMER BALL 1/2" N/A N/A CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARD COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER COLLAR KIT 1 3/8 YOKE CO LABEL W/CUSTOMER CODE (S/N 928934-) 07/10/18 DB(M)2660 Rotary Cutters 316-317P 61
Driveline 540 (826-790C) Comer Section 6: Drivelines 37458 62 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Driveline 540 (826-790C) Comer Section 6: Drivelines Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 2 25. 26. 27. 28. 29. Dwg 37458 826-790C 14025.361 180.015.130 15015.011 15015.011 190.000.016 180.015.279 15150.4140710 15150.108 190.000.394 15015.011 180.015.288 180.01240 180.015.289 180.016.790 14250.3847521 190.000.451 15016.486 180.016.487 180.016.483 190.000.078 12025.645.11 12025.646.11 14256.0757521 14257.0757521 12350.198.11 12450.338.11 190.000.098 190.000.099 165.000.628 190.000.913 Image No. DRVLN CAT4 38-6X38-6 NO C CO COMPLETE COLLAR YOKE C12 COMER CROSS JOURNAL SET RPBY 15015.011 COMER OUTER YOKE COMER ROLL PIN, INNER TUBE CO BUSH WITH GREASE FITTING CO COMPLETE OUTER TUBE COMER INNER TUBE COMER ROLL PIN FOR INNER TUBE CO INNER YOKE CO GUARD RETAIN. COLLAR O.T. COMER BOLT CO GUARD RETAIN. COLLAR I.T. CO SAFTEY CHAINS CO COMPLETE GUARD W/MANUAL COMER OUTER CIRCLIP COMER SLIDING SLEEVE COLLER COMER SPRING COMER FIXED SLEEVE COMER BALL 1/2" N/A N/A CO HALF FEMALE GUARD CO HALF MALE GUARD CO HALF FEMALE SHFT W/GUARDING CO HALF MALE SHAFT W/GUARD COMER DANGER LABEL OUTER TUBE COMER DANGER LABEL GUARD OUTER COMER COLLAR KIT 1 3/8 YOKE CO LABEL W/CUSTOMER CODE (S/N 928934-) 07/10/18 DB(M)2660 Rotary Cutters 316-317P 63
Gauge Wheel Components: Side Wheel Section 7: Options & Accessories 37419 64 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Gauge Wheel Components: Side Wheel Section 7: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 Dwg 37419 316-314A 316-312H 316-313H 316-315H 802-082C 802-280C 802-652C 803-019C 803-026C 803-308C 804-016C 804-017C 814-058C 815-092C Image No. SIDE GAUGE WHEEL * SIDE GUAGE WHEEL FRONT MOUNT SIDE GAUGE WHEEL REAR MOUNT SIDE GUAGE WHEEL FRAME HHCS 1/2-13X1 3/4 GR5 HHCS 3/4-10X7 1/2 GR5 HHCS 1/2-13X1 3/8 GR5 BLK NUT LOCK 1/2-13 PLT NUT LOCK 3/4-10 PLT NUT HEX FLG/LK 1/2-20 PLT GR G WASHER FLAT 1/2 SAE PLT WASHER FLAT 1/2 USS PLT TIRE & WHEEL LAMINATED 0 X 8 HUB & SPINDLE ASSY 4 BOLT 07/10/18 DB(M)2660 Rotary Cutters 316-317P 65
Gauge Wheel Components: Tail Wheel Section 7: Options & Accessories 37418 66 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Gauge Wheel Components: Tail Wheel Section 7: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 15. 16. 17. 18. 19. 20. 2 2 2 Dwg 37418 316-304A 316-311H 316-316H 327-129H 800-080C 802-041C 802-162C 802-214C 802-280C 802-326C 802-652C 803-019C 803-026C 803-169C 803-271C 803-308C 804-015C 804-016C 804-066C 805-255C 814-058C 814-161C 815-092C 890-961C Image No. TAILWHEEL - 60 DECK BOOM ARM TAILWHEEL PIVOT TAILWHEEL ADJUSTMENT TAILWHEEL BEAM WLDMT SHORT GREASE ZERK 1/4-28 THD FORMING HHCS 1/2-13X3 1/2 GR5 HHCS 5/8-11X3 1/2 GR5 RHSNB 1/2-13X1 1/4 GR5 HHCS 3/4-10X7 1/2 GR5 HHCS 1/2-20X1 1/4 GR5 HHCS 1/2-13X1 3/8 GR5 BLK NUT LOCK 1/2-13 PLT NUT LOCK 3/4-10 PLT NUT HEX FLG LOCK 1/2-13 PLT NUT HEX TOP LOCK 5/8-11 PLT NUT HEX FLG/LK 1/2-20 PLT GR G WASHER LOCK SPRING 1/2 PLT WASHER FLAT 1/2 SAE PLT WASHER MACH 25 X 50 X 14GA PIN ROLL 3/8 X 2 1/2 PLT TIRE & WHEEL LAMINATED 0 X 8 LAM 4X8 TR-WL-HUB-YOKE 25 SER. HUB & SPINDLE ASSY 4 BOLT RC25 TAILWHEEL YOKE, 5 SHAFT 07/10/18 DB(M)2660 Rotary Cutters 316-317P 67
Hub Assembly 4-Bolt W/ Zerk & Studs (815-092C) Section 7: Options & Accessories 37435 68 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Hub Assembly 4-Bolt W/ Zerk & Studs (815-092C) Section 7: Options & Accessories Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. Dwg 37435 800-001C 802-135C 803-289C 815-092C 815-230C 815-231C 816-286C 822-091C 822-092C 827-036C Image No. GREASE ZERK STRAIGHT 1/4-28 HUB STUD 1/2-20X1 5/8 GR5 NUT HEX 1 1/4-7(MACHINED)PLAIN HUB & SPINDLE ASSY 4 BOLT HUB 4 BLT W/CUPS, ZERK & STUDS HUB 4BLT DUCTILE(USE 815-230C) OIL SEAL DBL LIP 441 BORE BRG 25ID CONE 15123 BRG CUP 44OD 15245 BUSHING TW 25ODX.78IDX5 1/4 07/10/18 DB(M)2660 Rotary Cutters 316-317P 69
SMV Sign Table of Contents Section 7: Options & Accessories 37482 70 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Section 7: Options & Accessories SMV Sign Table of Contents Ref. Part No. Part Description Comments Revision Dwg 37482 316-362S 802-148C 803-230C 818-055C 890-153C Image No. SMV SIGN * HFSS 1/4-20X1/2 GR5 NUT HEX FLANGE 1/4-20 PLT DECAL SLOW MOVING-GALV. BACKED SMV MOUNTING BLADE 07/10/18 DB(M)2660 Rotary Cutters 316-317P 71
Decal Placement Table of Contents Section 8: Decals 37430 72 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Decal Placement Section 8: Decals Ref. Part No. Part Description Comments Revision 5. 6. 7. 8. 9. 10. 1 1 1 1 1 15. 16. 16. 17. 18. 19. 20. 20. 2 2 2 2 2 25. 26. 27. 27. 27. 27. Dwg 37430 818-045C 818-130C 818-142C 818-190C 818-339C 818-349C 818-388C 818-389C 818-390C 818-391C 818-402C 818-438C 818-558C 818-554C 818-555C 818-556C 818-555C 818-564C 818-681C 818-830C 818-831C 818-893C 838-964C 818-901C 838-965C 838-289C 838-517C 838-614C 838-615C 848-433C 858-177C 858-178C 858-179C 858-180C Drawing Image Number DECAL WARNING PINCH PT/CRUSH DECAL CAUTION 540 RPM DECAL DANGER PTO DRIVELINE EN DECAL FLAG DECAL WARNING HIGH PRESSUR SML DECAL GREASE 10 HRS LH DECAL - IMPORTANT, OPEN VALVE DECAL - OIL FILL LINE DECAL - WARNING SIDEMOUNT DECAL - WARNING TRACTOR ANGLE DECAL GREASE 10 HRS RH DECAL LIFT POINT DECAL WARNING GEN SAFE MOWER RPBY 818-558C DECAL DANGER ROTATE BLADE DECAL DANGER THROWN OBJ CUTTER DECAL DANGER ROTATE BLADE RPBY 818-555C DECAL NOTICE - 20 MPH MAX DECAL SAFETY COMBO SUNWEST DECAL WARNING HIGH PRESSURE RPBY 838-964C DECAL LP 16" W/TREE BROWN/GOLD RPBY 838-965C DECAL LANDPRIDE 16" BROWN/GOLD DECAL 2 YEAR GEARBOX WARRANTY DECAL QUICK HITCH SYSTEM DECAL REFLECTOR RED 2X9 DECAL REFLECTOR AMBER 2X9 DECAL GREASE EVERY 10HRS MULTI DECAL DB2660 - GOLD RPBY 858-177C DECAL DBM2660 - GOLD RPBY 858-179C S/N + S/N - (Obsolete) Obsolete BEIGE UNIT ORANGE UNIT BEIGE UNIT ORANGE UNIT Obsolete Obsolete 07/10/18 DB(M)2660 Rotary Cutters 316-317P 73
Touch-up Paints Section 8: Decals No diagram associated with this Parts List 74 DB(M)2660 Rotary Cutters 316-317P 07/10/18
Touch-up Paints Section 8: Decals Ref. Part No. Part Description Comments Revision 821-011C 821-070C 821-054C 821-058C 821-066C 821-067C 821-080C 821-011CTU 821-070CTU 821-054CTU 821-058CTU 821-066CTU 821-067CTU 821-080CTU 821-011CQT 821-070CQT 821-054CQT 821-058CQT 821-066CQT 821-067CQT 821-080CQT 821-011CGL 821-070CGL 821-054CGL 821-058CGL 821-066CGL 821-067CGL 821-080CGL LP BEIGE SPRAY CAN GLOSS BLACK SPRAY CAN MED. RED SPRAY TRCK/CTR GREEN SPRAY CUTTERS ORANGE SPRAY CAN BLUE SPRAY CAN PAINT ALUMINUM/ZINC SPRAY CAN LP BEIGE TOUCH-UP 5OZ GLOSS BLACK TOUCH-UP 5OZ MED RED TOUCH-UP 5OZ GREEN TOUCH-UP 5OZ ORANGE TOUCH-UP 5OZ BLUE TOUCH-UP 5OZ PAINT ALUMINUM/ZINC TOUCH UP LP BEIGE QUART GLOSS BLACK QUART MED RED QUART GREEN QUART ORANGE QUART BLUE QUART PAINT ALUMINUM/ZINC QUART LP BEIGE GALLON GLOSS BLACK GALLON MED RED GALLON GREEN GALLON ORANGE GALLON BLUE GALLON PAINT ALUMINUM/ZINC GALLON Spray can Spray can Spray can Spray can Spray can Spray can Spray can Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Touch-up bottle with brush Quart can Quart can Quart can Quart can Quart can Quart can Quart can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can Gallon can 07/10/18 DB(M)2660 Rotary Cutters 316-317P 75
The is a numeric index of all part numbers included in this manual. The index shows what page(s) the part is used on. Part Number Page Part Number Page Part Number Page Part Number Page *... 11, 21, 23, 25, 27, 29, 35, 45, 47, 57, 59, 65, 71 0.139.7100.00...19 0.139.71000...19 0.278.71000...19 0.7713000...19 0.773000.00...19 12025.645.11...63 12025.646.11...61, 63 12025.647.11...61 12350.197.11...61 12350.198.11...63 12450.338.11...61, 63 130560...35 13500009...43, 47, 51 13500009...43, 47, 51 135006.041...47 135010.042...47 13501026...47 13501076...47 13501026...43, 51 135015.076...43, 51 135030.042...43, 51 13503076...43, 51 135068.041...51 135068.042...43 139710100...15 14025.361...61, 63 14025.361...61 14250.3847521...61, 63 14256.0757521...61, 63 14257.0757521...61, 63 15015.011...61, 63 15015.011...61, 63 15015.011...61, 63 15016.486...61, 63 15150.4140710...61, 63 15150.108...61, 63 165.000.628...61, 63 180.01240...61, 63 180.015.130...61, 63 180.015.279...61, 63 180.015.288...61, 63 180.015.289...61, 63 180.016.483...61, 63 180.016.487...61, 63 180.016.790...61, 63 186561...35 190.000.016...61, 63 190.000.078...61, 63 190.000.098...61, 63 190.000.099...61, 63 190.000.394...61, 63 190.000.451...61, 63 190.000.912...61 190.000.913...63 20700542...39, 45 207006.542...49 207007.042...41, 49 207048.542...41 20700109...39, 41, 45, 49 20700109...39, 41, 45, 49 20700542...49 20700426...45, 49 207009.426...39, 41 207010.542...39, 41, 45 258821...35 300-318D...9 312-821D...9 312-844A...21 312-845A...23 312-948D...25, 27, 29 312-952D...25 312-953D...25 316-034D...17 316-099D...9 316-100D...9 316-106D...33 316-124H...15 316-153H...9 316-225H...13 316-226H...13 316-227H...13 316-228H...13 316-230A...13 316-231A...13 316-232A...13 316-233A...13 316-234A...13 316-235H...13 316-276A...13 316-277H...13 316-293H...9 316-299H...7 316-300A...57 316-302D...13 316-302H...17 316-304A...67 316-304D...13 316-305D...13 316-306H...17 316-311H...67 316-312D...13 316-312H...65 316-313H...65 316-314A...65 316-315H...65 316-316H...67 316-318A...27, 29 316-319A...23 316-321A...57 316-322A...59 316-323A...59 316-324H...17 316-335A...27, 29 316-336A...25 316-362S...71 316-372D...13 316-385L...11 316-386H...11 316-400D...17 316-412D...59 316-422D...17 316-423D...17 316-430D...17 316-431D...17 316-432D...17 316-459D...59 316-462D...25, 27 326-181D...27, 29 326-182D...27, 29 326-214D...21 326-215D...21 326-219D...23 326-220D...23 326-221D...17 326-223D...23 326-224D...23 327-129H...67 471413...53 491742...35 492282...35 492652...35 492721...35 492870...35 494383...35 502-068D...33 7113-023-0N0...53 8.0.00473...43, 51 8.0.00715...43, 51 8.0.9.00143...19 8.00197...43, 51 8.00382...43, 51 8.00555...19 8.0.01353...43, 51 8.01256...43, 51 8.01273...43, 51 8.7.00146...19 8.5.9.00265...43, 51 8.6.5.00006...19 8.6.5.00447...43, 51 8.6.8.01194...43, 51 8.7.0.01148...43, 51 8.7.01107...19 8.7.00490...43, 51 8.7.02206...43, 51 800-001C...9, 69 800-060C...11 800-066C...9 800-080C...7, 17, 67 800-392C...59 801-023C...35 802-005C...11 802-012C...7 802-015C...21, 23, 25, 27, 29 802-017C...9, 25, 27 802-034C...13 802-038C...15 802-041C...67 802-079C...17, 59 802-082C...65 802-091C...13 802-092C...9 802-098C...9 802-115C...33 802-135C...69 802-148C...71 802-162C...67 802-197C...17 802-214C...67 802-224C...13 802-277C...15 802-280C...65, 67 802-281C...17 802-326C...67 802-449C...13 802-453C...25 802-458C...57, 59 802-540C...57, 59 802-603C...17 802-647C...25, 27, 29 802-652C...65, 67 8025.418.000...41, 49 803-011C...7 803-013C...17, 59 803-014C...11 803-019C...65, 67 803-020C...15, 35 803-024C...13 803-026C...65, 67 803-038C...9 803-084C...33 803-169C...13, 67 803-170C...15 803-177C...9, 17 803-198C... 17, 21, 23, 25, 27, 29 803-230C...71 803-231C...17 803-255C...11, 13 803-263C...15 803-268C...11 803-271C...17, 67 803-289C...69 803-308C...65, 67 803-342C...13 804-007C...11, 13 804-012C...9, 17, 59 804-013C...9, 11, 17 804-015C...15, 57, 59, 67 804-016C...65, 67 804-017C...65 804-022C...13 804-029C...17 804-036C...7 804-066C...67 804-077C...57, 59 804-147C...15 805-004C...17, 31 805-017C...17, 31 805-103C...9 805-143C...13 805-175C...9 805-255C...67 8050.505.000...39, 41, 45, 49 8050.576.000...39, 41, 45, 49 806-051C...11 8075.200.000...39, 41, 45, 49 810-208C...55, 57, 59 810-212C...57, 59 810-295C...57, 59 810-312C...17, 31, 35 810-314C...15, 53 810-887C...35 810-944C...31 811-065C...31 811-133C...33 811-169C...33 811-170C...33 811-337C...31 811-394C...31 811-408C...57 811-409C...57 811-410C...57, 59 811-411C...15, 33, 59 811-567C...57, 59 811-800C...33 8125.418.001...39, 41, 45, 49 814-058C...65, 67 814-161C...67 815-092C...65, 67, 69 815-230C...69 815-231C...69 816-182C...15 816-286C...69 816-310C...25 816-437C...21 816-438C...21 816-504C...13 76 DB(M)2660 Rotary Cutters 316-317P 07/10/18
(continued) Part Number Page Part Number Page Part Number Page 816-643C...9 816-833C...7 818-045C...73 818-055C...71 818-130C...73 818-142C...73 818-190C...73 818-339C...73 818-349C...73 818-388C...73 818-389C...73 818-390C...73 818-391C...73 818-402C...73 818-438C...73 818-554C...73 818-555C...73 818-556C...73 818-558C...73 818-564C...73 818-681C...73 818-830C...73 818-831C...73 818-893C...73 818-901C...73 820-112C...15 8200.28000...39, 41, 49 8200.308.000...39, 41, 45, 49 821-011C...75 821-011CGL...75 821-011CQT...75 821-011CTU...75 821-054C...75 821-054CGL...75 821-054CQT...75 821-054CTU...75 821-058C...75 821-058CGL...75 821-058CQT...75 821-058CTU...75 821-066C...75 821-066CGL...75 821-066CQT...75 821-066CTU...75 821-067C...75 821-067CGL...75 821-067CQT...75 821-067CTU...75 821-070C...75 821-070CGL...75 821-070CQT...75 821-070CTU...75 821-080C...75 821-080CGL...75 821-080CQT...75 821-080CTU...75 822-091C...69 822-092C...69 822-214C...19 82200555...15 8225.248.000...39, 41, 45, 49 826-108C...45, 47, 57 826-109C...57, 59 826-110C...15, 19 826-138C...39, 57 826-492C...41, 43, 59 826-493C...49, 51, 59 826-790C...57, 63 826-791C...57, 61 827-036C...69 829-012C...9 8375.710.000...41, 49 838-289C...73 838-517C...73 838-614C...73 838-615C...73 838-964C...73 838-965C...73 841-080C...33 841-189C...31 841-190C...31 841-241C...57 841-242C...57 841-269C...57, 59 841-391C...33 841-392C...33 841-398C...59 841-438C...57 841-446C...57 842-237C...15 842-265C...11 84700146...15 848-433C...73 851-287C...33 851-288C...31 851-289C...31 851-290C...33 851-306C...59 851-307C...59 851-359C...33, 57 851-406C...31 851-519C...59 851-520C...59 8525.350.000...41, 49 8575.267.000...39, 41, 45, 49 858-177C...73 858-178C...73 858-179C...73 858-180C...73 8600.14000...39, 41, 45, 49 8600.148.000...41, 49 8600.149.000...39, 45 8600.390.000...39, 41, 45, 49 8600.670.000...39, 41, 45, 49 8625.140.000...39, 41, 45, 49 8675.188.100...39, 41, 45, 49 8675.20100...39, 41, 45, 49 8682-023-00N...55 8682-023-T4N...55 890-005C...17 890-126C...7 890-153C...71 890-341C...23, 27, 29 890-401C...9 890-454C...57, 59 890-455C...57, 59 890-485C...23, 27, 29 890-961C...67 891-149C...9 891-522C...11 891-523C...11 891-531C...11 891-784C...11 891-786C...11 9010.320.000...43, 51 9020.355.000...47 9020.365.000...47 9050.25000...47 9110.345.000...45, 47 9110.385.000...47 9116-003-00D...55 9120.215.000...47 9222-361-00D...55 9290.225.000...43, 51 9490.310.000...47 9510.090.000...43, 47, 51 9510.105.500...47 9510.106.000...47 9510.560.000...47 9540.25080...47 Dwg 12276...19 Dwg 25902...35 Dwg 37400...9 Dwg 37402...15 Dwg 37406...27, 29 Dwg 37418...67 Dwg 37419...65 Dwg 37430...73 Dwg 37435...69 Dwg 37450...43 Dwg 37452...41 Dwg 37455...49 Dwg 37456...51 Dwg 37457...39 Dwg 37458...63 Dwg 37459...61 Dwg 37482...71 Dwg 70035...11 dwg12301...47 dwg13249...55 dwg13250...53 dwg30125...13 dwg35078...45 dwg37403...21 dwg37404...23 dwg37405...25 dwg37417...17 dwg37421...57 dwg37422...59 dwg37425...33 dwg37428...31 dwg37429...7 J-37-A...11 J-37-R...11 J-AC1-15-B...11 N/A...35, 61, 63 07/10/18 DB(M)2660 Rotary Cutters 316-317P 77
Great Plains Manufacturing, Inc. Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com