000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical insulation. Pinned actuator for ruggedness and permanent grounding to switch bushing. Panel sealed to P 7 and fully sealed switch body. DPDT, PDT & PDT models with /- threaded bushing with flat. Highly reliable for low level or power applications. Matte black finish on body, bushing, actuator and hardware. SPECFCTONS Contact ratings (resistive loads): nitial contact resistance: nsulation resistance: Dielectric strength: Electrical life: mps at 0 VC, mps at VC or mps at 8 VDC. (Less than 00 m at 8 VDC to prevent damage to gold plating). Minimum load - 0 m at 0 mv, 0µ at VDC 0 milliohms maximum 000 megohms min. at 00 VDC 000 V rms min. - between terminals 000 V rms min. - between poles and terminals and frame t mps 0 VC or mps at 8 VDC - 0,000 cycles min. (0,000 for functions & ) t low level (0 m 0 mv) - 0,000 cycles min. (0,000 for functions & ) Operating temperature range: -0 C to +8 C Environmental: Shock: 0g - ms (EC 8--7). Vibration: 0-00 Hz - 0 g (EC 8--). Salt spray: 9 hrs.(ec 8--) Humidity: days,9% R.H.,0 C (EC 8--). MTERLS Contacts : ctuator: Bushing: Case: Hardware: Solid rivet - gold plated silver/nickel alloy Black chrome plated brass Black chrome plated brass Diallyl phthalate (DP) with plastic external shell, epoxy sealed Supplied with Hex Nut with black finish. See drawing at end of section. GENCY RECOGNTON CECC, GM, QPL (Europe), MUHG & DT (French defense military). Marking: Many models have full CECC recognition and are marked CECC. Consult factory for list of recognized models. BOUT THS SERES The material in this series is organized in the following sequence: a. Completely specified switch models b. Option drawings c. 'build your own switch' order format d. Miscellaneous and Positions & Connections PEM, PO BOX 888, HVERHLL, M US 08-0788 TOLL FREE: (877) -7890 FX: (78) - E-mail: info@apem.com 7
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES Solder lug terminals - double pole 7.0 0.0 (.8) (.09) Solder lug terminals - three pole MODEL NO. CRCUT X778 ON - ON 9X778 ON OFF ON 7X778 MOM OFF MOM 8X778 ON OFF MOM X778 ON ON ON RX778 ON ON MOM RX778 MOM ON MOM X778 - ON MOM (see dwg.): MODEL NO. CRCUT X778 ON - ON 9X778 ON OFF ON 7X778 MOM OFF MOM 8X778 ON OFF MOM (see dwg.):.00 (.8) 8.90-UNS 8 7.0 (.8).90 D-UNS 8 Maxi (. MX) 0.0 (.09).0.0 (.09) 8 Maxi.0.0 (. MX) (.).0.0 (.09).0 (.).0 SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE D Solder lug terminals - four pole 8.0 (.0) 7.0 (.8) 0.0 (.09) MODEL NO. CRCUT X778 ON - ON 9X778 ON OFF ON 7X778 MOM OFF MOM 8X778 ON OFF MOM X778 ON ON ON RX778 ON ON MOM RX778 MOM ON MOM (see dwg.): 8.90 D-UNS 8 Maxi (. MX).0 (.09).0 (.).0 D.0 Straight p.c. terminals - double pole 7.0 0.0 (.8) (.09) MODEL NO. CRCUT X778 ON - ON (see dwg.): 8 8 Maxi.0 (. MX) 8.0 (.8).90 D-UNS.0.00 D.0 D (.0 D) 8 PEM, PO BOX 888, HVERHLL, M US 08-0788 TOLL FREE: (877) -7890 FX: (78) - E-mail: info@apem.com
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES Straight p.c. terminals - three pole.00 (.8) 7.0 0.0 (.8) (.09) SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE Straight p.c. terminals - four pole MODEL NO. CRCUT X778 ON - ON (see dwg.): MODEL NO. CRCUT X778 ON - ON (see dwg): 8.0 (.0).90 D-UNS D 8 8.90 D-UNS 8 Maxi.0 (. MX).0 7.0 0.0 (.8) (.09) 8 Maxi.0 (. MX).0.00 8.0 (.8) D.00.0 D (.0 D) CTUTOR OPTONS D.00 D (.9 D) TERMNLS.70 (.0).0 (.07).0 (.).0 (NONE) Standard Short Solder lug P.C. LOCKNG CTUTOR OPTONS (arrow indicates flat) 7.00 D 7.00 D 7.00 D (.7) (.7 D) (.7 D).90 9.0 (.8) (.7).90 (.8) 9.0 (.7).90 (.8) 0.0 (.8) 8.0 (.8).0 D (.0 D).90 7.0 (.8) (.8).80 (.).90 (.8) 8.0 (.8).00 V locked position (function ) V locked positions (function ) V locked positions (functions 9 & ) Security Guards available - see Miscellaneous & ccessories section D. PEM, PO BOX 888, HVERHLL, M US 08-0788 TOLL FREE: (877) -7890 FX: (78) - E-mail: info@apem.com 9
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES dditional ordering information: Commonly ordered models are shown on prior pages with complete model numbers and specifications. Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from all available options shown and filling in the boxes. Model Structure: Options: 'BULD YOUR OWN SWTCH' ORDER FORMT Fill in boxes with selections shown for Model Structure, then add Options selections for complete model number. llowable options are shown below each respective box. Note 'NONE' indicates box may be left empty. Series Terminals Number Electrical Momentary for & bushings of poles functions function Solder lug or terminals Straight p.c. terminals (all models have /- thd'd. bushing) Double pole Three pole Four pole ctuators Special options pprovals/listings ON - ON (NONE) 9 ON OFF ON R ON ON MOM 7 MOM OFF MOM R MOM ON MOM 8 ON OFF MOM - ON MOM ON ON ON * ON ON MOM * MOM ON MOM * specify selection from 'Mom. for function ' box also SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE PNEL CUT-OUT (NONE) Standard Short V Locking ( position) V Locking ( positions) V Locking ( positions) (see actuator dwgs.) X 7 7 8 High performance (NONE) C E C C (consult factory for details of approved models). MSCELLNEOUS Example of completely specified model number: RVX778CECC lthough most combinations of options are available, some may result in incompatibilities. Consult factory if there is any question..00 D (.7 D).0 (.00) STNDRD HRDWRE.0 (.) (.090) SWTCH CTON (arrow indicates flat).9 D-UNS U Hex Nut - matte black Function - Other functions 70 PEM, PO BOX 888, HVERHLL, M US 08-0788 TOLL FREE: (877) -7890 FX: (78) - E-mail: info@apem.com
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES POSTONS ND CONNECTONS SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE Function Lever position & connections Terminal (flat) identification ON - ON (-)- (-)- (-7)-8 (-7)- 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON 8CT MOM OFF ON - - - - - ON MOM - - - - ON ON ON R MOM ON ON R MOM ON MOM - - - - - - ON - ON (-)- (-)- (-7)-8 (-7)- (9-)- (9-)-0 0-7- - 8 9- Wiring for way switches (function ) rrow indicates external jumper added by customer. R R ON - ON - - C-C C-C E-E E-E G-G G-G ON ON ON - - - C-C C-C C-C E-E E-E E-E G-G G-G G-G C E G C E G C C E E G G PEM, PO BOX 888, HVERHLL, M US 08-0788 TOLL FREE: (877) -7890 FX: (78) - E-mail: info@apem.com 7