Newness 00 Pre-feeder This new patented product has been especially designed for racing yachts. It offers the possibility of easy opening and closing during a headsail hoist, and allows the luff line to be re-inserted, at any height, it is particularly useful in the case of an accidental disengagement. When correctly positioned below the forestay foil or furler feeder, it ensures a quick and efficient guide for the headsail luff. Product available in 00 Trapeze Hook / spreader bar (revet ENV / Wichard) Ideally suited to sailors competing in dinghy, skiff and off the beach catamaran racing. The spreader bars quick release hook allows the user to free himself instantaneously, even under tension. Designed and produced in conjunction with the National School of Sailing in France. This new safety product will be available in 00, and will become compulsory for ISF regattas, from 006 Product available in 00 Carbon tiller extensions 67 Carbon tiller extension, length 90 67 Carbon tiller extension, length,0 Our new boom brake features a control friction knob that allows you to pre-set the friction depending on the conditions you are sailing in. It fits onto the vang fastening on the boom and the 0, pre-stretched rope, control line leads back to the cockpit. oom brakes Part # Description For boats up to For maximum Dimensions Weight m * mainsail area (sq m) Kg 60 Single boom brake 9 8 70 x 7 x 0.0 60 Twin boom brake 70 x 7 x 76 0.80 C Fitting of single model Fitting of twin model
Suary New products page Pre-feeder Trapeze Hook / spreader bar Carbon tiller extensions oom brakes locks page Roller locks pages 6 to 9 H.R. roller blocks pages 0 & Stainless steel blocks page Plain bearing blocks pages to ccessories for blocks page 6 Swivel base Cam cleats Eye straps Wedge kit Deck organisers Sheaves with captive balls Springs Clevis adaptators Masts step adaptators all bearing blocks pages 7 to 0 Ratchet blocks page Snatch block page Rig adjusters and wire accessories page abystay adjusters page ackstay adjusters page Lifeline hooks page 6 Fastenings page 7 Folding pad eyes page 8 Toe rail pad eyes page 9 Water-tight U-bolts page 9 Eye nuts, Eye straps and Eye bolts page 0 Snap hooks and swivels page Snap shackles page Trigger Snap Shackles page Quick Release Snap Shackles HR page Snap Hooks page Carbine Hooks page Mooring Hooks page 6 Chain grip page 6 Swivels page 7 Rings and adjusters page 8 Shackles page 9 Standard self-locking pin page 0 Captive pin shackles page HR shackles page Tethers, wind indicators,tiller extensions, knives page Tethers page Wind indicators page Tiller extensions page Knives pages 6 & 7
Safety begins with a W For your safety Wichard is certified ISO 900 ; functional limit and break load are given in this catalogue as an indication. The functional limit is the maximum static load that the product can endure during use, without deforming. The product will no longer function correctly beyond this load capacity. The breaking load is the static load applicable to the product, which leads to its total failure, either by rupture or deformation. ll Wichard products carry a five year limited warranty against defects in manufacture to the first purchaser if used in accordance with this catalogue s published specifications. Wichard will replace all defective Wichard products, with the sole stipulation that they have not been used beyond the indicated characteristic limitations. Wichard generally recoends not going past 80% of the functional limit. In accordance with international regulations, Wichard excludes from its limited warranty all damages and liability relative to the deterioration of equipment which is not manufactured by Wichard. Wichard reserves the right to modify the characteristics of its products without prior notification. The values and illustrations in this catalogue are not contractual. Corrosion in the marine environment ll Wichard products are passivated. Corrosion attacks stainless steel and is always visible in the form of black coloured roughness. lthough this is dangerous, it is rarely seen in current use, except in cases where martensitic (HR) steel is in total, prolonged iersion. What many people erroneously call corrosion, is really rust, or oxidation. This is due to outside causes. In the marine environment, stainless steel is subject to considerable aggressive forces and is not totally corrosion free. Re-passivation can be accomplished with a passivator such as Wichinox (see page 8). ll stainless steel demands a minimum of upkeep. Stainless steel Wichard uses top-quality grades of stainless steel in its products (see chart). The first type is a low carbon austenitic steel (6L), which offers good mechanical characteristics. They are non-magnetic steels and most of Wichard s products are manufactured in this grade. The second (7.PH) is martensitic steel (magnetic), which is referred to as high-resistance steel (HR). Type ustenitic Martensitic Coon name 8. Mo 7. PH European Standard XCrNiMo7-- XCrNiCuNb 6- US ISI Standard 6 L 60 Composition: Carbon < 0,0% < 0,07% Chromium 8% 6,% Nickel % % Molybdenum % Copper % www.wichard.com / equip your boat Easily look up your boat by model in our database. Wichard has registered the characteristics of more than 000 sailboats in order to help you to choose the most suitable fittings for your boat. Just specify the model of your boat and you will get the list of the most suitable products for each application for a better use and total safety. Look at the mainsail system with the blocks used and get their characteristics by clicking on the part number. Then, print the list in order to make your purchase easier when visiting your usual ship chandler. www.wichard.com
Our blocks, which are designed and manufactured at our factories, feature high-performance materials and are subject to a rigorous manufacturing process. For whatever type of block, ball bearing, plain bearing or roller, the shape of the sheave suits all modern ropes. They are also very easy to install due to the various types of fastenings options. locks
Roller blocks Exploded view of a Roller lock Stainless steel or titanium Titanium swivel head Hardened anodised aluminium flanges Torlon Rollers nti Friction bushing Stainless steel screws and nuts Composite or aluminium head Spacing ring luminium hollow sheave luminium sheave from 0 to 0 diameter (0 with composite sheave) For ropes from 8 to 0 diameter breaking load up to tons 6
Roller blocks Sheave Dia: 0 Composite Rope Size 6 to 0 Forged Shackle Part # Description Height Width Thickness Function Load Kg reaking Load Kg Weight Kg 900 Swivel head 6 0 80 700 0.08 9006 Swivel head with becket 80 0 80 700 0.0 Table of fastening systems Depending on the application, the original shackle can be replaced by one of the following systems, available from yacht chandlers. For blocks Fixed head Swivel fork Snap shackle Webbing 7 cm Webbing cm 900/06 790 ***** 790 79 790 90/06 0.0 kg 0.066 kg 0.0 kg 0.08 kg 90/06 90/06 90/06 790 7906 79 796 79 90/06/08/ 0.0 kg 0.06 kg 0.8 kg 0.00 kg 0.0 kg 0/06/07/08 90/06/07 790 7906 79 796 79 08/0 0.0 kg 0.068 kg 0.7 kg 0.00 kg 0.0 kg 960/06 7
Roller blocks 0 sheave Rope size from 8 to 0 diameter - forged shackle Part # Description Height Width Thickness Function Load Kg reaking Load Kg Weight Kg 8 9 6 7 90 Swivel head 80 7 00 900 0.0 906 Swivel head with becket 96 7 00 900 0.00 90 Cheek block bolts dia 67 00 900 0.06 Double blocks 90 Fixed eye 80 7 600,000 0.8 0 sheave Rope size from 8 to 0 diameter - 6 forged shackle 90 Swivel head 9 8 600,00 0.8 906 Swivel head with becket 8 600,00 0. 908 Swivel head with becket and cam 0 60 600,00 0.8 90 Cheek block bolts dia 78 600,00 0. Double blocks 90 Fixed eye 9 8 800,600 0.0 6 906 Fixed eye with becket 8 800,600 0.6 0 Triple blocks 8 90 Swivel head 9 68 800,600 0.8 9 906 Swivel head with becket 68 800,600 0.9 0 907 Swivel head with cam 9 0 60 600,600 0.80 908 Swivel head with becket and cam 0 60 600,600 0.9 6 Fiddle blocks 90 Swivel head 0 8 600,00 0.7 906 Swivel head with becket 0 8 600,00 0.8 907 Swivel head with cam 0 0 60 600,00 0.78 6 908 Swivel head with becket and cam 0 0 60 600,00 0.8 6 sheave for rope size 8 to diameter - 8 forged shackle 90 Swivel head 68 0 70,800 0.8 906 Swivel head with becket 68 0 70,800 0. 908 Swivel head with becket and cam 8 60 600,800 0.8 90 Cheek block bolts dia 9 68 6 70,800 0.00 Double blocks 90 Fixed eye 68 0 900,800 0.78 6 906 Fixed eye with becket 68 0 900,800 0.8 7 90 Cheek block bolts dia 9 68 8 60,800 0. Triples blocks 8 90 Swivel head 68 70 900,800 0.8 9 906 Swivel head with becket 68 70 900,800 0. 0 907 Swivel head with cam 8 60 600,800 0. 908 Swivel head with becket and cam 8 60 600,800 0. Fiddle blocks 90 Swivel head 8 68 0 70,800 0.68 906 Swivel head with becket 80 68 0 70,800 0.80 90 Swivel head triple sheave 8 68 70 70,800 0.66 907 Swivel head with cam 8 8 60 600,800 0.7 6 908 Swivel head with becket and cam 80 8 60 600,800 0.8 8
80 sheave For rope size 8 to 8 forged shackle Part # Description Height Width Thickness Function Load Kg reaking Load Kg Weight Kg 960 Swivel head 8 8 7,0,00 0.80 9606 Swivel head with becket 8 7,0,00 0.9 960 Cheek block bolts dia 0 8,0,00 0.68 Double blocks 960 Fixed eye 8 8 7 900,800 0.7 7 960 Cheek block bolts dia 0 8,000,00 0.0 9
H.R. roller blocks 0/0/00 : Francis Joyon off Cape Horn during world record attempt on luminium sheave dia 6 Rope size 8 to - 8 "HR" shackle Part # Description Shackle dia. Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 0 Swivel head 6 06 67,600,000 0.98 06 Swivel head with becket 8 67,00,00 0.66 Double blocks 0 Swivel head 0 67,00 7,000 0.96 luminium sheave dia 80 For rope size to "HR" shackle 0 Swivel head 8 8,00,00 0.96 06 Swivel head with becket 0 6 8,00 7,000 0.8 0 Cheek block bolts 8 dia 8,800 7,000 0.88 Double blocks 0 Swivel head 8 7,00 9,00 0.868 0 Cheek block bolts 8 dia 8,800 7,000 0.78 luminium sheave dia 00 For rope size 6 to 8 "HR" shackle 0 Swivel head 0 6 0 9,00 7,000 0.69 06 Swivel head with becket 00 0 9,00 9,00 0.90 0 Cheek block bolts 0 dia 0 6,000 9,00 0.900 Double blocks 0 Swivel head 9 0 68 6,00,000.68 0 Cheek block bolts 0 dia 0 6,000 7,00.86 luminium sheave dia For rope size 8 to 0 "HR" shackle 0 Swivel head 0 0,00 9,00. 06 Swivel head with becket 0 0 6,00,000. 0 Cheek block bolts dia 77 0,00,000.6 Double blocks 0 Cheek block bolts dia 77 0 7,00,000.0 0
luminium sheave dia60 For rope size 0 to "HR" shackle Part # Description Shackle dia. Height Width Thickness Function reaking Weight Load Kg Load Kg Kg Specially designed for large yachts and racing boats, these HR blocks have higher functional limits and break loads. This is due to their large diameter sheaves and Torlon roller bearing. 0 Swivel head 6 6,00,000.768 06 Swivel head with becket 6 6 8,00 8,000.90 0 Cheek block bolts 6 dia 6 9 8,000 8,000.96 Double blocks 0 Cheek block bolts 6 dia 6 8 8,000 8,000.6 luminium sheave dia 00 For rope size to 6 "HR" shackle 60 Swivel head 0 09 6,000,000.80 606 Swivel head with becket 0 0 09 6,000,000.06 60 Cheek block bolts 6 dia 80 09 8,00,000.7 Double blocks 60 Cheek block bolts 6 dia 80 09 99,00,000 7.7 luminium sheave dia 0 For rope size 6 to 0 "HR" shackle 70 Swivel head 80 69 6,000,000 7.0 70 Cheek block bolts 0 dia 0 6 7,000,000 6.99 Double blocks 70 Cheek block bolts 0 dia 0 0 7,000,000 0.90
Stainless steel blocks 6 7 8 9 0 Sheave dia: 8 rope size 6 à 8 Part # Description Height Width Thickness Function reaking Weight w/o balls Load Kg Load Kg Kg 008 Single block 0 00 0.06 08 Single with becket 7 0 00 0.0 Sheave dia: 9 rope size 6 009 Single with eye 8 9 8 0 00 0.0 Sheave dia: rope size to 6 00 Single with shackle 6 0 00 0.0 Single block 0 00 0.0 6 0 Single with becket and shackle 70 0 00 0.06 7 Single with becket 6 0 00 0.0 8 0 Single with V cleat, becket and shackle 70 0 00 0.0 9 0 Single with V cleat and becket 6 0 00 0.08 0 0 Double with shackle 6 9 0 00 0.00 0 Double with becket and shackle 70 9 0 00 0.07 06 Double with V cleat, becket and shackle 70 9 0 00 0.07 07 Triple with shackle 6 7 0 00 0.00 08 Triple with becket and shackle 70 7 0 00 0.060 09 Triple with V cleat, becket and shackle 70 7 0 00 0.060 Wichard s range of stainless steel blocks undeniably constitutes one of the classic ranges of yachting products. They are lightweight, reliable, and provide good performance, and are available in a range of sizes. Sheave dia: rope size 8 to 0 6 00 For stanchion 6 0 00 0.09 7 0 For stanchion, pivoting 9 0 00 0.070 8 0 Swivel shackle block 9 0 00 0.06 6 7 8 9 0 Swivel shackle block 9 0 Flat dia sheave 0 0 00 600 0.06 9 0 Curved dia sheave 0 0 0 00 600 0.06 9 06 Removable 6 dia sheave 6 6 8,000,000 0.68 Wire blocks with aluminium sheave 0 0 dia sheave, for wire 7 0 0.09 0 006 6 dia sheave, for wire 66 9 0 00 0.00 0 000 0 dia sheave, for wire 7 0 00 800 0.08 0 0070 70 dia sheave, for 7 wire 0 70,00,00 0. 007 70 dia sheave, for 7 wire 0 70,00,00 0.98 Rope size 0 Mast step blocks Sheave dia: 00 Single with clevis 7 0 700,000 0.076 0 Swivel with clevis 0 0 700,000 0.0 Land-yacht blocks (curved) Sheave dia: 0 0 Single 8 0 00 800 0.0 Single with becket 08 0 00 800 0.06
Plain bearing blocks 6 ll metal components for blocks with sheaves to 80 have ample dimensions in order to take heavy loads. The sheave rotates on a large stainless-steel reinforced bushing, it turns smoothly and offers an outstanding resistance to shearing and dynamic forces. Series to 70 shackle models are fitted with a multi-position head, and all the cam cleats are adjustable. 7 8 9 0 Mini block Sheave dia: (Stainless steel sheave) rope size Part # Description Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 0600 Fixed eye 6 0 00 0.0 Sheave dia: 8 rope size to 6 0 Fixed eye 8 00 00 0.0 0 Fixed eye with becket 8 00 00 0.0 6 00 Cheek block 6 8 00 00 0.00 Double blocks 8 0 Fixed eye 8 8 00 700 0.08 9 0 Fixed eye with becket 8 8 00 700 0.0 Triple blocks 0 0 Fixed eye 8 600 900 0.0 0 Fixed eye with becket 8 600 900 0.08 Sheave dia: rope size 6 to 8 Part # Description Height Width Thickness Function Load Kg reaking Load Kg Weight Kg 0 Swivel head 6 8 0 00 0,06 Fixed eye 9 8 00 600 0,08 Fixed eye with becket 6 8 00 600 0,0 Opposite in line 7 8 00 600 0,0 6 0 Cheek block 8 00 600 0,09 7 Upright block 9 00 600 0,0 Double blocks 8 Fixed eye 6 00 800 0,06 9 Fixed eye with becket 78 00 800 0,060 Triple blocks 0 Fixed eye 60 600 000 0,077 Fixed eye with becket 7 600 000 0,08
Plain bearing blocks "Patented" 6 7 8 9 Sheave dia: Rope size 8 to 9 stamped shackle Part # Description Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 0 Swivel head 78 00 900 0.06 06 Swivel head with becket 9 00 900 0.07 08 Swivel head with becket and cam 9 0 900 0.7 6 7 Fixed head with clevis 7 00 00 0.00 7 Fixed eye 7 9 00 900 0.00 0 0 Cheek block bolts 6 dia 6 00 900 0.09 Upright block 6 00 900 0.077 Reefing block 60 8 0 00 900 0.06 Swivel snap hook 0 0 00 0.076 Double blocks 0 Swivel head 78 9 600 900 0.097 06 Swivel head with becket 9 9 600 900 0.07 0 Triple blocks 6 0 Swivel head 78 6 700,000 0. 7 06 Swivel head with becket 9 6 700,000 0. 8 08 Swivel head with becket and cam 9 6 0,000 0.9 Fiddle blocks 9 0 Swivel head 0 00 900 0.08 08 Swivel head with becket and cam 0 9 0 900 0.6 6 7 Sheave dia: Rope size 0 - forged shackle 0 Swivel head 00 7 7 00 900 0.0 06 Swivel head with becket 0 7 7 00 900 0. 08 Swivel head with becket and cam 0 7 7 0 900 0.0 6 7 Fixed head with clevis 9 7 7 00 700 0.08 7 Fixed eye 9 7 7 00 900 0.08 8 8 Webbing D ring 00 7 7 00 900 0.07 0 0 Cheek block bolts 6 dia 7 7 00 900 0.070 Double blocks 0 Swivel head 00 7 6 600,000 0.7 06 Swivel head with becket 0 7 6 600,000 0.9 8 9 Triple blocks 6 0 Swivel head 00 7 6 700,000 0.9 7 06 Swivel head with becket 0 7 6 700,000 0. 8 08 Manille ringot taquet coinceur 0 9 66 0,000 0.8 Fiddle blocks 9 0 Swivel head 7 7 700,000 0. 0 06 Swivel head with becket 7 7 700,000 0. 07 Swivel head with cam 77 7 0,000 0. 08 Swivel head with becket and cam 77 7 0,000 0.6 Swivelling snap shackle 0 7 7 700,000 0.7 8 Swivelling snap shackle with becket and cam70 77 7 0,000 0.
Plain bearing blocks "Patented" 0 6 Sheave dia: Rope size - 6 forged shackle Part # Description Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 0 Swivel head 9 7 900,00 0.8 06 Swivel head with becket 7 9 7 900,00 0.98 08 Swivel head with becket and cam 7 0 600,00 0. 09 Swivel with clevis 9 7 800,000 0.6 0 Swivel with clevis and becket 9 7 800,000 0.8 6 7 Fixed head with clevis 9 7 900,00 0. 7 Fixed eye 08 9 7 900,00 0. 8 8 Webbing D ring 0 9 7 900,00 0.67 9 0 Swivelling snap shackle 9 7 900,00 0.96 0 0 Cheek block 6 dia bolts 89 9 900,00 0.9 Double blocks 0 Swivel head 9 0,000,00 0.96 06 Swivel head with becket 7 9 0,000,00 0. Triple blocks 6 0 Swivel head 9 70,00,00 0.86 7 06 Swivel head with becket 7 9 70,00,00 0.0 8 08 Swivel head with becket and cam 7 0 7 600,00 0. Fiddle blocks 9 0 Swivel head 67 9 7,000,00 0. 0 06 Swivel head with becket 90 9 7,000,00 0.60 08 Swivel head with becket and cam 90 9 600,00 0.67 Swivelling snap shackle 76 9 7,000,00 0.9 8 Swi. snap shackle with becket and cam 99 9 600,00 0.99 Sheave dia: 70 Rope size - 8 forged shackle Part # Description Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 0 Swivel head 60 7,00,700 0.7 06 Swivel head with becket 88 7,00,700 0. 08 Swivel head with becket and cam 88 7 8 600,700 0.66 09 Swivel with clevis 7,000,00 0.0 6 7 Fixed head with clevis 7,00,000 0. 9 0 Swivelling snap shackle 7 7,00,700 0.0 0 0 Cheek block 8 dia bolts 7 9,00,700 0.0 Double blocks 0 Swivel head 60 7 60,800,700 0.6 06 Swivel head with becket 88 7 60,800,700 0.68 Triple blocks 6 0 Swivel head 60 7 88,000,700 0.780 7 06 Swivel head with becket 88 7 88,000,700 0.8 8 08 Swivel head with becket and cam 88 0 9 600,700.08 Fiddle blocks 9 0 Swivel head 7 7,800,700 0. 0 06 Swivel head with becket 7,800,700 0.67 08 Swivel head with becket and cam 8 600,700 0.806 Swivelling snap shackle 7,800,700 0. 8 Swi. snap shackle with becket and cam 8 600,700 0.8 Sheave dia: 80 Rope size 8-8 forged shackle 60 Swivel head 7 8,00,00 0. 6 606 Swivel head with becket 0 8,00,00 0.8
ccessories for blocks For sports boats or dinghies, swivel bases enable the boat s fittings to be optimised. They are manufactured according to Wichard s tradition of quality, and form part of the original equipment on many modern designs. Their dimensions, and the adjustable orientation of the cam cleats, mean they can be installed on your boat without any modifications. 7 Deck organizers Part # Description Dia sheave Rope Length Width Thickness Fastener Weight Kg 6 sheaves 6 to 0 0.0 6 sheaves 6 to 70 0. 6 sheaves 6 to 0 0.8 sheaves 8 to 6 70 6 9 0.8 sheaves 8 to 6 0 6 9 0. sheaves 8 to 6 90 6 9 0.8 6 7 8 Swivel base Part # Description Weight 00 Mainsheet swivel base ball bearing rope size 0.08 kg 00 Swivel cleat base rope size 0.60 kg 00 Swivel cleat base rope size 0.78 kg 9 8 9 0 Deck organisers - all earing Sheaves 8 8 Single sheaves 9 9 8 7 0.0 8 8 Single sheaves à 9 8 7 0.0 9 8 Double sheaves à 9 9 7 0.8 9 86 Double sheaves 8 à 9 7 0.9 Plain bearing sheaves Part # Description Sheave dia Thickness Pin size For rope Weight Kg 008 Sheave 8 8. 6 0.00 008 Sheave 0. 6 6 0.00 008 Sheave. 0 8 0.00 008 Sheave.0 0 0 0.0 008 Sheave.0 0 0.0 0086 Sheave 70 9.0 0.0 0087 Sheave 80.0 8 0.060 Sheaves with captive balls Part # Description Sheave dia Thickness Pin size For rope Weight Kg 8008 Polycarbonate sheave. 0 8 0.008 8008 Polycarbonate sheave.0 0 0 0.00 8008 Polycarbonate sheave.0 0 0.00 80086 Polycarbonate sheave 70 9.0 0.07 80088 Polycarbonate sheave.0 0 0 0.0 80089 Polycarbonate sheave 9.0 8 0.0 0 Cam cleats 0006 for rope 8 Fastener spacing 6 0.07 kg 00 for rope 8 0.0 kg 006 for rope 6 0.068 kg Saddles 6 006 Eye strap Height Fastener spacing 6 008 Eye strap 8 00 Eye strap Wedge kit 0 Wedge kit for part # 00 Fastener spacing 8 Stand up springs 0 Stand up spring, without collar for sheaves 8 & dia. 0 Stand up spring, with collar for sheaves & dia 0 Stand up spring, with collar for sheaves & 70 dia Clevis adaptor Part # Description For blocks Clevis dia Pin dia Height Weight Kg 70 Swivel, clevis adaptor Sheaves et 8 8 0.0 7 Swivel, clevis adaptor Sheave 0 6 0.0 Mast step adaptor 80 Mast step adaptor Part # 7 & 87 8 Mast step adaptor Part # 7 & 87 Ø Ø 8 M8 M8 6
all bearing locks «Patented» s part of their innovative design, Wichard ball-bearing blocks feature an original concept using two races of lateral ball bearings. They provide excellent performance under a light load, when you have to haul the rope quickly. Under heavier loads, the force is transferred to a solid stainless-steel bushing, on which the self-lubricating sheave, rotates freely. The ball bearings never get crushed and any lateral friction caused by a poorly aligned rope is eliminated, which means that the range of uses is far wider than for conventional designs. The high performance characteristics and work loads of Wichard ballbearing blocks make them highly reliable accessories that provide long-term, trouble-free service. 6 Sheave dia: 8 Rope size to 6 diameter Part # Description Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 80 Fixed eye 8 00 00 0.0 80 Fixed eye with becket 8 00 00 0.0 800 Cheek block 6 8 00 00 0.00 Double blocks 7 80 Fixed eye 8 8 00 700 0.08 8 80 Fixed eye with becket 8 8 00 700 0.0 Triple blocks 9 80 Fixed eye 8 600 900 0.0 0 80 Fixed eye with becket 8 600 900 0.08 Sheave dia: Rope size 6 to 8 diameter 80 Swivel head 6 8 0 00 0.06 8 Fixed eye 9 8 00 600 0.08 8 Fixed eye with becket 6 8 00 600 0.0 8 Opposite flat 7 8 00 600 0.06 80 Cheek block 8 00 600 0.09 6 8 Exit block 9 00 600 0.0 Double blocks 7 8 Fixed eye 6 00 800 0.0 8 8 Fixed eye with becket 78 00 800 0.09 Triple blocks 9 8 Fixed eye 60 600,000 0.077 0 8 Fixed eye with becket 7 600,000 0.08 7 9 8 0 7
all bearing locks «Patented» To facilitate their installation onboard, our range of blocks offer a broad variety of attachment options: shackles, snap shackles and hooks, fixed or swivel head with clevis and ring for webbing. The adaptable multi-position head in Wichard series to 70 sheaves, allows the rotation of the swivel to be locked in various positions. multi-position head adapter 8
Sheave dia: Rope size 8 diameter - forged shackle Part # Description Height Width Thickness Function reaking Load Kg Load Kg Weight Kg 80 Swivel head 78 9 00 900 0.06 806 Swivel head with becket 9 9 00 900 0.06 808 Swivel head with becket and cam 9 9 0 900 0. 87 Fixed head with clevis 7 9 00 00 0.0 8 Fixed eye 7 9 00 900 0.00 7 80 Cheek block 6 dia bolts 6 9 00 900 0.0 8 8 Upright block 6 00 900 0.080 9 8 Swivel snap hook 0 9 0 00 0.08 Double blocks 0 80 Swivel head 78 6 600 900 0.097 806 Swivel head with becket 9 6 600 900 0.07 Triple blocks 80 Swivel head 78 700,000 0.6 806 Swivel head with becket 9 700,000 0. 808 Swivel head with becket and cam 9 0,000 0.0 Fiddle blocks 80 Swivel head 0 9 00 900 0.09 8 808 Swivel head with becket and cam 0 9 0 900 0.0 Réa pour cordage de 0 - manille forgée 80 Swivel head 00 7 00 900 0.0 806 Swivel head with becket 0 7 00 900 0.7 808 Swivel head with becket and cam 0 7 0 900 0.6 87 Fixed head with clevis 9 7 00 900 0.09 8 Fixed eye 9 7 00 900 0.06 6 88 Webbing D ring 00 7 00 900 0.08 7 80 Cheek block 6 dia bolts 7 7 00 900 0.076 6 7 8 9 0 6 7 8 Double blocks 0 80 Swivel head 00 7 0 600,000 0.70 806 Swivel head with becket 0 7 0 600,000 0.9 Triple blocks 80 Swivel head 00 7 60 700,000 0.7 806 Swivel head with becket 0 7 60 700,000 0. 808 Swivel head with becket and cam 0 9 60 0,000 0.8 Fiddle blocks 80 Swivel head 7 700,000 0.0 6 806 Swivel head with becket 7 700,000 0. 7 807 Swivel head with cam 77 0,000 0.9 8 808 Swivel head with becket and cam 77 0,000 0.60 9 8 Swivelling snap hook 7 0 00 0.0 0 8 Swivelling snap shackle 0 7 700,000 0.7 88 Swivelling snap shackle with becket and cam 70 77 0,000 0.6 9 0 9
all bearing locks «Patented» Sheave dia: Rope size diameter - 6 forged shackle Part # Description Height Width Thickness Function reaking Load Kg Load Kg Weight Kg 6 7 8 9 80 Swivel head 9 900,00 0.7 806 Swivel head with becket 7 9 900,00 0.0 808 Swivel head with becket and cam 7 0 600,00 0. 809 Swivel with clevis 9 800,000 0.70 80 Swivel with clevis and becket 9 800,000 0.7 6 8 Fixed eye 08 9 900,00 0.0 7 87 Fixed eye with clevis 9 900,00 0.60 8 88 Webbing D ring 0 9 900,00 0.8 9 80 Swivel snap shackle 9 900,00 0.00 0 80 Cheek block - bolts 6 dia. 89 9 900,00 0. Double blocks 80 Swivel head 9,000,00 0.90 806 Swivel head with becket 7 9,000,00 0.9 0 Triple blocks 80 Swivel head 9 66,00,00 0.9 806 Swivel head with becket 7 9 66,00,00 0. 808 Swivel head with becket and cam 7 0 66 600,00 0.0 Fiddle blocks 6 80 Swivel head 67 9,000,00 0. 7 806 Swivel head with becket 90 9,000,00 0.60 8 808 Swivel head with becket and cam 90 9 600 00 0.70 9 8 Swivel snap shackle 76 9,000,00 0.7 0 88 Swivel snap shackle with becket and cam 99 9 600,00 0.8 Sheave dia: 70 Rope size - 8 forged shackle Part # Description Height Width Thickness Function reaking Load Kg Load Kg Weight Kg 6 7 80 Swivel head 60 7 9,00,700 0.68 806 Swivel head with becket 88 7 9,00,700 0.0 808 Swivel head with becket and cam 88 7 9 600 700 0.66 809 Swivel with clevis 7 9,000,00 0.60 7 87 Fixed eye with clevis 7 9,00,000 0.0 9 80 Swivel snap shackle 7 7 9,00,700 0.00 0 80 Cheek block - bolts 8 dia 7 9,00,700 0.7 Double blocks 80 Swivel head 60 7 6,800,700 0. 806 Swivel head with becket 88 7 6,800,700 0.60 8 9 0 Triple blocks 80 Swivel head 60 7 8,000,700 0.780 806 Swivel head with becket 88 7 8,000,700 0.80 808 Swivel head with becket and cam 88 0 8 600,700 0.9 Fiddle blocks 6 80 Swivel head 7 7 0,800,700 0.0 7 806 Swivel head with becket 7 0,800,700 0.8 8 808 Swivel head with becket and cam 0 600,700 0.787 9 8 Swivelling snap shackle 7 0,800,700 0.9 0 88 Swi. snap shackle with becket and cam 0 600,700 0.68 0
Ratchet locks «patented» In addition to the advantages offered by its ball-bearing blocks, Wichard also offers ratchet blocks with the same styling, featuring its patented ratchet system. Several versions of this ratchet block are offered to cover all applications. It is fitted with a high-precision machined sheave made of hardened anodized aluminium, which is mounted on Delrin ball-bearings. The ratchet is engaged and released by an ergonomically-profiled slide button. This block can be mounted on a 00 swivel base with a 7 adaptation. (p.6) Sheave dia: Rope size - 6 forged shackle Part # Description Height Width Thickness Function reaking Load Kg Load Kg Weight Kg 80 Swivel head 9 6 900,00 0.8 80 Swivel head with becket and cam 7 0 6 600,00 0.6 8 Cheek block - Port 6 dia. bolts 89 9 9 900,00 0.0 8 Cheek block - Starboard 6 dia. bolts 89 9 9 900,00 0.0 Triple blocks 80 Swivel head with becket and cam 7 0 80 600,00 0.9 Sheave dia: 80 Rope size 8-8 HR shackle 6 7 Part # Description Height Width Thickness Function reaking Weight Load Kg Load Kg Kg 6 860 Swivel head 7 8,00,00 0.6 7 8606 Single with swivel head with becket 0 8,00,00 0.66
Snatch blocks Snatch blocks Fitted to a pad eye or toe rail, Wichard s single handed operation, snatch blocks are highly useful for taking up a rope that is already reeved. The elastomer moulded cheeks make them shock and scratch-resistant. Each one is fitted with a snap shackle allows them to move freely in any position. With its forged highresistance stainless steel arm, the closing system is very strong. It can be opened very easily by pulling on the central plunger pin, as you would with a normal snap shackle. Stainless steel snatch block This stainless steel snatch block can be used for any application. It is already popular in the kenesitherapy and physiotherapy fields. The design makes its positioning easier. The all stainless steel construction is a guarantee of safety and reliability. Stainless steel snatch block Part # Description Height Width Thickness Functionreaking Weight Kg Kg Kg 0 Max 6 diameter rope 7 0 7. 0 00 0.8 Poulies ouvrantes Part # Description Height Width Thickness Functionreaking Weight Kg Kg Kg 00 Max. diameter rope 9 900,00 0.9 00 Max. 8 diameter rope 9 9,00,00 0.9 0 Max. diameter rope 9 900,00 0.8 0 Max. 8 diameter rope 0 9 9,00,00 0.8
Our adjusters are fitted with an ingenious nickel plated copper adjustment system that eliminates any risk of snagging or oxidation. Their specially designed thread provides ease of operation whilst at the same time withstanding a very high manoeuvring load Rig adjusters and wire accessories
abystay adjusters «patented» / / / For fitting a jib, setting up a genoa or a solent jib etceteras. oth for safety and performance reasons, fitting a removable inner forestay is strongly recoended when there is a roller furling system. Wichard offers a whole range of babystay adjusters. The table below will allow you to determine the product best suited to your boat. With wheel Length pin to pin Toggle Dia Dia For Part # Closed/Open Length x width pin Handing Funct. reak. Stud Wire Weight kg Load kg Load kg Kg 6 0 0 x 0,00,00,00 /6/7.090 With handle 0 0 0 x 0 8 800,00,00 8 / 0.80 6 0 0 x 0,00,00,00 /6/7.68 66 70 0 x 0,00,00,00 /6/7.90 With ratchet 8 60 0 7 x,00,000 6,000 7/8/9.88 87 60 0 7 x,00,000 6,700 7/8/9.86 88 6 8 x 6,00,000 9,000 6 9/0.86 Selection chart of babystay adjusters per size of boat Length in m 6 to 7.60 7.60 to 9 9 to 0 0 to 0.7 0.7 to.. to to.6.6 to. Length in ft 0 à à 0 0 à à à 8 8 à 0 0 à à 8 Etai principal Etai volant 6 6/6/66 6/6/66 7 6 6/6 6/66 6/66 66 8 7 6/6 66/87/8 87/8 87/8 87/8 87/8 87/8 87/8 9 8 87/8 87/8 87/8 87/8 87/8 87/8 87/8 0 9 87/8 87/8 87/8 87/8 87/88 88 88 0 88 88 88 88 88 88 These indications are not contractual, as each boat is different, we recoend you to check with a professional
ackstay adjusters «patented» deck ccessories for baby stay attachment. Wichard offers a comprehensive range of fixing points for baby stay attachment. Double pad eye, allow a single attachment point for both the baby stay pelican adjuster and the jib tack point, fits all sizes of adjusters. hull Part # Weight kg 9 0 abystay tang, to be fitted to the mast 0.06 6 6 Double folding padeye dia. 6 (page 8). 0.6 6 6 Double folding padeye dia. 8 (page 8). 0. 6 66 Double folding padeye dia. 0 (page 8). 0.9 9 0 Eye strap, used as a backing plate for double pad eye part #66 and 66 (page 0) 0.08 9 0 Eye strap, used as a backing plate for double pad eye part #666 (page 0) 0.07 6 Threaded eye hook for tensioning. raking load,000 kg (small yachts) 0. 6 ackstay adjusters «patented» ackstay adjusters allow you to optimize rigging and sails performance. Our models with handles are also comfortable to operate and allow greater onboard access. For small units, the wheel model offers an outstanding quality-price ratio. 7 With wheel Length pin to pin Toggle Dia Dia For Part # Closed/Open Length x width pin Handing Funct. reak. Stud Wire Weight kg Load kg Load kg Kg 6 0 0 x 0,00,00,00 /6/7.8 6 7 With handle 6 0 0 x 0,00,00,00 /6/7.8 With ratchet 6 0 660 7 x,00,000 6,000 7/8/9.0 67 0 660 7 x,00,00 6,700 7/8/9.088 68 0 7 8 x 6,00 7,000 9,000 6 9/0.6
Lifeline hooks L These hooks can be used to close the gate on lifelines simply and effectively. The excentric shape and the length of the arm on the pelican hook (part. N 8) allow the wires to be tensioned easily. These models comply with draft European standards. Lifeline Hook "patented" Wichinox C Length C Function reaking Weight Part # Load Kg Load Kg Kg 8 9 6 8 M8 x 800,00 0.076 Pelican Hooks "patented" Length C Tension Function reaking Weight Part # Load Kg Load Kg Kg 86 70 0 8 M x 7 8,000 6,00 0.8 87 70 0 8 M x 00 8,000 6,00 0. 8 00 6 8 M8 x 800,800 0.06 Part # 960 Wichinox : paste for cleaning and passivation of stainless steel. This stainless steel cleaning and passivation paste will ensure your fittings have a spotless appearance and will extend their service life. Wichinox has a neutral effect on plastics, and comes in new, even more practical, packaging for straightforward application. Swage studs (for part # 8) C D For wire dia. Weight Part # Kg 7 80 7. 0. 8 x ø 0.06 7 80 9 8. 8 x ø 0.0 7 80 6 6. 8 x ø 6 0.06 C Wire Grips For wire E M P Weight Part # Ø Kg 7 0 - x 70 / 9 0.009 7 06-6 7 x 90 / 0.00 7 08 7-8 9 6 x 00 6 / 7 0.09 7 0 0 8 x 8 / 0.08 7 8 x 0 / 6 0.0 Sail Chafe Protector Part #. 07 This two parts ring which for clipping to 6 to 0 diameter wires, protects sails and facilitates manoeuvring whilst minimising snagging risks. E P 6
The range of Wichard parts designed for safely fastening deck and rigging components provides both an elegant and effective solution to the problems relating to installing fittings. The range has application that extend beyond the maritime sector, and they are also used in the industrial sector, as well as for architectural purposes and interior decorating. Fastenings 7
Folding pad eyes Ø d Most boat builders have opted for Wichard folding pad eyes. They are drop-forged with no welding, and in themselves offer remarkable strength. In addition, by aligning themselves in the forces direction, they can handle higher operating loads, regardless of the position in question. When only used intermittently, they can be folded down out of the way using a silicon pad that also eliminates noise and unpleasant vibrations. Our double folding pad eyes were designed to enable several stays or a baby stay and a jib tack point to be attached to a single point. Ø d Universal Folding Pad Eye dia D C dia d Function reaking Weight Part # Load Kg Load Kg Kg 6 8 6 0 6. 900,600 0.06 Folding Pad Eye "patented" dia D C dia d Function reaking Weigh Part # Load Kg Load Kg Kg 6 0 6 7 6.,800,700 0.067 6 0 8 9 7 8.,000,00 0.6 6 06 0 7 0.,00 9,000 0.86 60 Ti 6 7 6.,000,00 0.00 E 60 Ti 8 9 7 8.,00 6,000 0.080 606 Ti 0 7 0.,700 0,000 0.7 Double Folding Pad Eye "patented" dia D C dia d E F Function reaking Weigh Part # Load Kg Load Kg Kg 6 6 6 7 6. 90 9,800,700 0.6 6 6 8 9 7 8. 8 9,000,00 0. 6 66 0 7 0. 78,700 0,000 0.9 Folding swivel snap shackle Length Swivel snap shackle Pad eye Function reaking Weigh Part # part # part # Load Kg Load Kg Kg 97 80 7 60,00,000 0.8 976 00 76 60,600,80 0.0 Roland Jourdain. Vendée Globe 00, fit with Wichard and Profurl hardware 8
Toe rail pad eyes Toe Rail Pad Eyes "patented" dia H C mini-maxi mini mini-maxi D Function reaking Weight Part # Toe rail Load Kg Load Kg Kg 66 standard 9-0 -,00,000 0.86 66 asyetric 9-0 -,00,000 0.86 66 standard - - 6 8,00,800 0.80 D H U-olts Part # Ø L C Function Load Kg reaking Load Kg max tightening Weight Nm Kg C H C H Using these sliding pad yes, the toe rail can be utilised without any risk of damage, for a wide range of applications, such as attaching running rigging, barber hauler, boom brake, kicking strap, or a fender guide when docked. 6 0 7 600,000. 0.0 6 60 8 0 800,000. 0.0 6 6 70 7 600,900 7. 0.060 6 6 90 7 600,900 7. 0.067 6 8 80 6 0 0 000,800 8.0 0. 6 8 00 6 0 60 000,800 8.0 0.7 6 0 90 0 00 7,000 6.0 0.00 6 0 0 0 6 00 7,000 6.0 0. 6 6 0 0 8 000,000 60.0 0.9 6 6 0 70 8 000,000 60.0 0.9 C L Watertight U- olts Watertight U-olts "patented" Part # Part # Thread L C Function reaking max tightening Weight black white Load Kg Load Kg Nm Kg 6 6 60 8 0 800,000. 0.0 6 6 6 70,600,900 7. 0.060 6 6 6 90,600,900 7. 0.068 6 6 8 80 6 0,000,800 8.0 0. 6 6 8 00 6 60,000,800 8.0 0.6 6 6 0 90 0 6,00 7,000 6.0 0.9 6 6 0 0 0 6 6,00 7,000 6.0 0.8 66 66 0 7 0 8,000,000 60.0 0. 66 66 0 7 70 8,000,000 60.0 0.7 C L oth stylish and practical, the UV-resistant rubber collar on Wichard watertight U-bolts eliminates the need to use a waterproof sealant. 9
Eye straps, eye nuts and eye bolts Saddles Forged using 6L stainless steel, Wichard eye straps offer outstanding strength. Furthermore, their perfect finish allows the wear of components connected to them such as webs or ropes to be minimised. Saddles Part # dia D E reaking Weight Load Kg Kg 9 0 8 0 60 0.00 9 0 0 7,800 0.009 9 0 6 6,00 0.06 9 0 8 6 9,00 0.08 9 0 0 0 6 78 7,000 0.07 Webbing Eye Straps 9 8 0.007 9 0 6 0.0 9 0 8 0.08 Reefing Eye Strap peut s utiliser en prise de ris 9 6 0 0.09 D E Eye olts and Eye Nuts Wichard eye nuts and eye bolts are single-piece forged components that guarantee you excellent safety standards for your fastenings. They come in a broad range of sizes, enabling you to find the solutions best suited to your circumstances. Should you wish to order large quantities with specific lengths or diameters, Wichard can also manufacture custom-made items. D C Eye olts dia Long C D Funct. reaking max tightening Weight Part # Load Kg Load Kg Nm Kg 6 90 6 0 0 700 900 7. 0.0 6 9 6 60 60 700 900 7. 0.07 6 9 8 80 80 70 6,00,00 8.0 0.06 6 9 8 00 00 90 6,00,00 8.0 0.06 6 9 0 00 00 88 7 6,000,700 6.0 0.098 6 97 0 0 0 8 8,000,00 60.0 0.6 Eye Nuts C D H reaking Weight Part # Load Kg Kg C H 6 6 M 6 x 00 7 7 *,700 0.0 6 6 M 8 x 7 7 *,00 0.00 6 8 M 8 x 7 6 *,00 0.0 6 8 M 0 x 0 7 6 *,00 0.09 6 0 M 0 x 0 8 6 *,800 0.099 6 6 0 M x 7 8 6 *,00 0.09 6 66 M x 7 7 6 *7,000 0.6 6 67 M x 00 7 6 *9,000 0.70 6 68 M 6 x 00 7 6 *0,000 0.7 *The strength figures given are an indication only and change according to specification of the end fitting 0 D
complete range of snaps and hooks of the highest quality, stamped with the Wichard name. Wichard snap and hooks will never break suddenly! They show signs of deformation well before reaching breaking point. Snaps, hooks and swivels
HR Snap Shackles Fixed eye Length C Ø D Funct. reaking Weight Part # Kg Load Kg Kg 70* 8 6 00 00 0.0 7 0 6 0,00,000 0.0 7 70,600,00 0.090 Clevis Pin 7 0 6 6,00,000 0.0 7 70 8 7,600,80 0.0 D C The plunger pin is set captive into the hook during assembly and cannot become detached. Consequently, you will no longer have to worry about finding yourself stuck with an incomplete and consequently unusable part. Without Swivel with Female Thread Length Metric Thread Weight Part # (I.S.O.) Kg 77 6 7 x 7 0.0 77 60 9 x 7 0.096 777 80 6 x 00 0. Swivel Eye 7 70 6,00,000 0.06 7 90,600,80 0.6 87 90 all bearing,600,80 0.8 7 Ti* 90 Titanium,00,800 0.09 77 0 6,00 8,000 0. 877 0 all bearing,00 8,000 0. 6 With Thimble Eye Length Rope Function reaking Weight Part # Load Kg Load Kg Kg 9 9 6,00,000 0.076 9 0,600,00 0.0 6 Large ail 7 80 6 9,00,000 0.070 7 0 6,600,80 0.60 77 0 6,00 8,000 0.98 7 8 7 Webbing Swivel 7 80 6 0,00,000 0.08 76 00 0,600,80 0.70 8 9 With Clevis Pin Swivel 8 7 70 6 6,000,700 0.07 9 76 90 7 7,600,80 0. 9 78 0 6 7 8 000 7,000 0.7 9 0 0 Toggle with Eye 7 8 6,00,000 0.090 7 0 6,600,80 0.0 *Note : parts # 70 and 7 are not "HR"
Trigger snap shackles Swivel Eye Length C D Funct. reaking Weight Part # Load Kg Load Kg Kg 6 8 7,800,600 0.0 6 0,900,000 0.80 67 7 9,00 8,000 0. 6 Ti 8 7,00,00 0.067 67 Ti 7 9,000 6,000 0.00 Large ail 7 00 7 0,800,600 0.0 7 7,900,000 0.0 77 0 7,00 8,000 0.80 Swivel Shackle 8 0 7,000,000 0.8 87 7 9 8,00 8,000 0.90 Release Fid 00 Release fid - anodised aluminium The loads indicated by Wichard for this trigger snap shackle are not theoretical loads: they are regularly checked using our traction benches. This snap shackle is the only one in its class which is forged from high-resistance steel or titanium, providing it with strength and performance characteristics which have resulted in it being adopted by all racers. The quickrelease mechanism can be opened either manually or by using a fid. D C Quick release snap shackles HR patented 6 With Swivel Eye 67 70,00,00 0.09 67 80 6,600,00 0.088 67 90 0,,000,00 0.6 676 0 6,000,800 0. 677 0 0 0,000 6,00 0.7 678 0 6,00 9,000 0.8 6 With Large ail 77 80 9,00,00 0.0 77 90 6,600,00 0.00 77 0 0 6,,000,00 0.60 776 0,000,800 0.7 777 0,,00 6,00 0.96 778 60,00 8,00 0.68 The totally smooth oval shape of Wichard quick-release snap shackles make them ideal for brace and spinnaker sheet manoeuvres. The snap shackle opens iediately, and can be released effortlessly using a control line. The tack point version can be fully integrated into sails, enabling it to be brought as close to the edge of the deck as possible. Its well-designed shape facilitates and allows for the optimal fitting of webbing. 7 7 Tack Snap Shackle Length sangle Function reaking Weight Part # Load Kg Load Kg Kg 7 70 0,600,00 0.09
Snap hooks It goes without saying that our double action safety hooks feature the famous torsion spring developed by Wichard. They can be fitted using just one hand, and release when you press on the rear lever. There is a greatly reduced risk of them opening accidentally. The webbing or rope terminates in the moulded rubber eyelet. This product, which is both practical and offers good performance, was designed under the stringent requirements of European standard EN6 (for connectors). The new large mouth double action hook (6) is a piece of individual protection equipment (IPE) approved for use in industry and is individually stamped with CE008 and EN6. Double ction Safety Hooks "Patented" 6 Colour Length Function reaking Weight Part # Load Kg Load Kg Kg Yellow 8 9 x 0,00,800 0.6 lue 8 9 x 0,00,800 0.6 Large mouth double action hook «Patented» 6 Orange 0 6 8,00,00 0.98 Snap Hooks Patented in many countries Length. Function reaking Weight Part # Load Kg Load Kg Kg 80 0 8 6 0 00 0.0 8 7 0 600 700 0.067 8 00 6,00,00 0.86 Safety Snap Hooks "HR" 8 HR 7 0,00,800 0.06 8 HR 00 7,00,000 0.67 (High resistance type) Swivel Snap Hooks 8 70 8 0 00 0.06 8 00 9 600 800 0.0 6 Webbing Snap Hook Length Function reaking Weight Part # Load Kg Load Kg Kg 8 60 8 0 0 00 0.0
Carbine hooks Carbine hooks "Patented" Dia Lenght Function reaking Weight Part # Load Kg Load Kg Kg 6 60 0 7 0 600 0.00 8 80,00,600 0.07 6 0 00,00,00 0. 7 0 6,700,800 0.9 6 60 7 00 800 0.0 8 80,00,700 0.07 6 0 00 8,60,600 0.6 7 0 6,800,00 0. 8 70 0 0,800,00 0.6 6 60 0 8 0 600 0.08 8 80,00,600 0.06 6 0 00,00,00 0. 7 0 6,700,800 0.00 Wichard snaps and hooks, which are the product of cutting-edge technological development, are simple, safe and strong. Delta Hooks 8 80 0 900,00 0.07 6 0 00 6 0,00,00 0.0 "One Hand" Sail Snaps "Patented" Length Function reaking Weight Part # Load Kg Load Kg Kg 86 Stainless Steel 0 7. 6. 00 0 0.0 8 Stainless Steel 9 8 00 0 0.07 87 Stainless Steel 6 0 00 0 0.09 89 Stainless Steel 80. 700 800 0.00 88 Stainless Steel 90 7,000,00 0. 90 Stainless Steel 0,00,00 0. 786 rass 0 7. 6. 00 0 0.00 78 rass 9 8 0 00 0.06 787 rass 6 0 0 00 0.06 Sail snaps, which are easy to fit, allow you to keep one hand free for operating the boat.
Simple Mooring Hooks Simple Mooring Hooks delivered with attachment fitting Dia Length Weight Part # Kg 96 0 00 8 0.76 97 0 6 0.80 98 70 0 0 0.78 Spare attachment fitting for mooring hooks Delivered with screws Part # Description 76 For part # 96 77 For part # 97 and 98 utomatic Mooring Hooks (patented) Ø Length Weight Réf Kg 9 automatic 70 0 0 0.80 89 t a distance 70 0 0 0.90 The Wichard mooring hooks can be adapted for all types of boat hooks (not supplied). They are an economical and simple solution for fastenings to mooring buoys. Chain Grip Chain Grip Description Length Rope diameter Function reaking Weight Part # Load Kg Load Kg Kg 98 For 8 chain 8 6,00,600 0.08 98 For 0 chain 0 0,900,00 0.6 986 For chain,00,00 0.0 This product has been designed to ensure a safe anchoring by easing the tension on the anchor chain. The Wichard chain grip give more comfort and safety to the boat. It prevents the anchor chain from chafing on the rub rail or roller chock. It can be secured on the chain between two links for a one hand positioning. The locking set pin keeps it in position in any conditions. Made from marine stainless steel 6 for a better resistance to corrosion and maximum efficiency. 6
Swivels With Clevis Pin Length C ØD Function reaking Weight Part # Load Kg Load Kg Kg 6 70 7,000,800 0.087 86 70 all bearing,000,800 0.09 6 0 9 8,000 6,00 0.80 86 0 all bearing,000 6,00 0.89 Pin with llen Head 6 70 8,800,800 0.08 6 0 9 8 0,000,00 0.6 Large ail 67 80 6,000,000 0.096 867 80 all bearing,000,000 0.096 68 9,000 6,00 0.6 868 all bearing,000 6,00 0.68 66 6,00 9,000 0.68 C D Swivels HR The outstanding technical characteristics of Wichard swivels mean they are the preferred option whenever the safety of crew or equipment is at stake. nd this applies not only in the navy or on yachts, but also in diverse sectors such as the entertainment industry, the defence sector and the handling sector. when you are risking your life, you have the right to be demanding! 6* 9 0 0 600,000 6* 60 6 900,00 Self locking 6 6 80 7 0 8,800,800 0.0 69 0 7 8 0,00,000 0. 7 Webbing Swivel 67 60 0,00,00 0.80 68 80 0,000,00 0.0 Fork Fork (SS Cambered Plate) llen Head Pin 6 80 7 8,800,800 0.099 69 0 7 8 0,00,000 0. *(parts n 6 and 6 are not «HR») 7 6 Mooring swivels Our new mooring swivels are made from a grade of stainless steel that is specially made so it can be iersed in water permanently. Consequently, they have a strength well-suited to this application and excellent resistance to corrosion. You can fit out your mooring lines with shackles # 06, 07, 6, 7 or 8. 8 Length Function reaking Weight Part # Load Kg Load Kg Kg 0 8,00,000 0.90 0,700,00 0. 8 7
Rings and adjusters Wichard s stainless steel rings and adjusters are hot drop forged from 6l stainless steel in a single piece, not just bent and welded. Forging is a far superior process, because it maintains the structural integrity of the metal and increases working load limits in real world applications. Each part is polished and passivated to create a beautiful, yet durable surface that is highly resistant to corrosion. The W is a pentagon (plus 6l) mark stamped into every part is your assurance of Wichard quality. Description Stock Dia Inside dimensions reaking Weight Part # Load Kg Kg 6 78 Ring, dia,,000 0.0 6 78 Ring. dia.,000 0.08 6 78 Ring 7. dia.,000 0.07 6 7 D Ring 6. 0.,000 0.09 6 7 D Ring 6. 0.,000 0.0 6 7 D Ring. 0.,000 0.09 6 7 Triangle. 0.,00 0.00 6 7 Triangle 6. 0.,000 0.07 6 7 Triangle with bar 6..,000 0.08 6 77 Double adjuster..,00 0.0 6 77 Double adjuster -8.,000 0.078 "HR" D Rings 60 D Ring 6 7.,700 0.06 60 D Ring 8.,00 0.08 606 D Ring 0. 9,000 0.0 8
Shackles are for linking two components, and consequently play an essential role in term of safety. That is the reason why our shackles are : Drop-forged. Their technical characteristics are closely controlled during the manufacturing process. llowing wichard to stamp its brand on them with every confidence. This signature offers you the guarantee of safety. Shackles 9
Self-locking shackles 6 7 8 Self-locking standard pin shackles patented t the thumb screw end, the elasticity of the shackle's body locks the pin s position into one or other of its small indentations. There is no need to worry about it accidentally coming loose due to vibrations. Self-locking D Shackles Ø Function reaking Weight Part # Load Kg Load Kg Kg 0 8 00 700 0.007 0 6 0 00,000 0.0 0 6 0 70,600 0.0 0 8 6 6,0,700 0.0 0 0 0,900 00 0.098 06 9,600 6,000 0.9 07 7 8,000 8,000 0. Self-locking Long Shackles 8 00 700 0.008 9 0 00,000 0.07 6 70,600 0.07 8 6,0,700 0.066 0 0,900,00 0.8 Self-locking Twisted Shackles 6 0 600,00 0.06 6 0 70,00 0.07 8 0 6,0,000 0.067 0 0 0,800,00 0.7 Self-locking ow Shackles Ø Function reaking Weight Part # Load Kg Load Kg Kg 8 8 00 700 0.009 0 00,000 0.07 6 8 70,00 0.00 8 7 6,0,700 0.068 0 7 0,900,00 0.7 6,600 6,000 0. 7 6 70,000,000 0.0 8 0 80 0,000 6,000.06 Self-locking Large Opening Shackles 6 6 0,00 0.06 6 6.,00 0.07 6 8 7,700 0.067 6 0 7 0,000 0.7 6 llen Head Pin Shackles "D" The head of the pin does not stick out from the shackle's body, thus eliminating any risk of snagging. 0 6 9 70,600 0.0 0 8 6 6,00,700 0.0 0 0 0,800,00 0.099 06 9,600 6,000 0.87 6 6.,00 0.0 (Specially designed for batten cars) 7 llen Head Pin Shackles "ow" The head of the pin does not stick out from the shackle's body, thus eliminating any risk of snagging. 6 7 70,600 0.09 8 7 6,00,700 0.067 0 7 0,800,00 0. 6,600 6,000 0. 8 Tack shackles These shackles are specially designed for adjustment to the width of goosenecks 6 6 60,00 0.08 8 9,000,00 0.0 0
Captive pin shackles patented Captive pin shackles patented Not only are these self-locking, the pin is also connected to the body at all times, even when fully opened. Consequently, there is no more risk of seeing it fall in the water, which would make the shackle unusable. These shackles can therefore be fitted completely safety using just one hand. Captive Pin "D" Shackles Ø C Function reaking Weight Part # Load Kg Load Kg Kg 0 8 00,000 0.009 0 6 0 6 600,00 0.06 0 6 0 7 80,00 0.08 0 8 6 6 9,0,600 0.06 0 0 0,900,00 0. 06 9,600 7,000 0.88 Captive Pin Twisted Shackles 8 00,000 0.0 9 0 6 600,00 0.0 6 6 7 80,00 0.00 8 6 6 9,0,600 0.09 0 78 0,900,00 0.76 C Key pin shackles patented Closing these threadless shackles is done simply by rotating the pin half a done simply by rotating the pin half a turn: it doesn t get much quicker? For major loads, there are also high-resistance versions. Key Pin Shackles Ø C Function reaking Weight Part # Load Kg Load Kg Kg 7-00,00 0.0 6 6-60,00 0.08 8 9 -,000,00 0. 6 Key Pin Shackles with ar 8 7 00,00 0.0 8 6 6 60,700 0.0 8 8 9 0,000,00 0. 9 HR 7 600,00 0.0 9 HR 6 6 70,00 0.0 9 HR 8 9 0,00,00 0. Key Pin Shackles 7 0 6 600,00 0.0 6 7 70,00 0.09 8 9 6 9,0,700 0.090 0 7 0,900,00 0.70 Captive Pin ow Shackles 8 8 00,000 0.00 0 6 600,00 0.09 6 7 7 70,00 0.0 8 7 6 9,0,700 0.07 0 6 0,900,00 0.9 C 6
HR shackles HR shackles HR stands for High Resistance. The 7. PH stainless steel that these shackles are forged from offers very high level mechanical performance characteristics. These models, which form an integral part of the fittings on large ocean-going monohulls and multihulls, are also widely used in the industrial sector. HR "D" Shackles Ø Function reaking Weight Part # Load Kg Load Kg Kg 0 HR 6 0,00,700 0.0 0 HR 8 6 6,00,00 0.0 0 HR 0 0,00 7,00 0.0 06 HR 9,00 0,000 0.9 07 HR 9 8 6,00,000 0.0 08 HR 6 6 8,00 9,000 0.6 09 HR 0 70 0,000 8,000 0.860 Titanium shackles (Ti) These shackles, which are forged from T6V titanium alloy, were designed for high-level racing. Compared to equivalent High Resistance models, they offer a weight saving of approximately 0%. Thimble shackles These shackles are stylish and very reliable. Their special shape enables an end to be directly spliced without adding an additional thimble. The stainless steel models with a thimble moulded over the top are designed for boats under 60 foot long. For bigger boats, forged models made of either High Resistance stainless steel or titanium have been specially developed. Thimble Shackles "patented" Dia Ø rope Funct. reaking Weight Part # max. Load Kg Load Kg Kg Captive pin 9 8 6,0,000 0.076 9 0 0 6,900,000 0. llen head pin 9 8 6,0,000 0.07 9 0 0 6,900,000 0.0 0 Ti 6 0,00,00 0.0 0 Ti 8 6 6,800,00 0.0 HR Long Shackles HR 0 78 0,00 7,00 0.6 D C Thimble Shackles with llen Head Pin Dia Ø rope Funct. reaking Weight Part # max. Load Kg Load Kg Kg HR ow Shackles HR 8 7 6,00,00 0.068 HR 0 7 0,00 7,00 0.6 6 HR,00 0,000 0. 0 HR 6 8 6,00,000 0.6 7 HR 6 70 8,00 9,000 0.6 8 HR 0 80 0,000 8,000.0 9 HR 08 8 6,000,000.706 Ti 0 7 0,700 6,000 0.08 6 Ti,00 8,000 0.6 6 806 HR 87 0 7 0 6,000 0,000 0.8 806 Ti 87 0 7 0 6,000 0,000 0.8 6 Thimble Shackles 86 HR 87 0 7 0 6,000 0,000 0.6
Safety tethers, wind indicators and tiller extensions provide comfort, precision and safety, and facilitate manoeuvring. Wichard has all the expertise required to bring such equipment to the highest levels of perfection. s for knives, every sailor knows just how essential they can be for a whole range of varied used. Wichard is based in Thiers, a town that has been manufacturing knives for five centuries : some facts speak for themselves. Tethers, wind indicators, tiller extensions, knives
Tethers 6 Wichard tethers, whether featuring standard or double action safety hooks, comply with European standard EN 09 (except 70). With the elastic models, which retract or stretch depending on what movements are occurring, you are moving freely across the deck, whilst still enjoying full safety. 7 8 These new elastic tethers comply with ORC regulations applicable to ocean racing. Fitted with a quick opening snap shackle on the harness side, and an overload indicator. 7 00 Elastic harness tether. Retracts from to meter, with two double action safety hooks. Weight 0.98 kg 7 00 Same with two stainless steel carbine hooks. Weight 0.8 kg 6 7 0 Harness tether. meter long with two double action safety hooks. Weight 0.9 kg 6 7 0 Same with two stainless steel carbine hooks. Weight 0.06 kg 6 7 0 Same breaking load,00 Kg, with two stainless steel carbine hooks. Weight 0.0 kg 7 006 Elastic harness tether. m fixed line, the other retracts from to meter, with three double action safety hooks. Weight 0.8 kg 7 00 Same with three stainless steel carbine hooks. Weight 0.6 kg 7 8 ORC tethers 7 7 007 Elastic harness tether. Retracts from to meter, two double action safety hooks, with overload indicator, double action safety hook and quick opening snap shackle. Weight 0.8 kg 8 7 008 Elastic tether. metre fixed line, the other retracts from to meter, with overload indicator, two double action safety hooks, double action safety hook and quick opening snap shackle. Weight 0.80 kg
Tiller extensions Tiller extensions Due to the excellent design of the joints in Wichard tiller extensions, and their comfortable non-slip handles, they fully transmit all the sensations created by forces on the tiller. The telescoping and locking mechanisms in the telescopic models feature an ingenious ball bearing system which makes them very efficient and easy to use. ll these tiller extensions are supplied with a rest position clip. (except 7) Telescopic tiller extensions 7 0 Telescopic tiller extension, adjustable from 70 to 00 cm. Weight 0.68 kg 7 Telescopic tiller extension, adjustable from 80 to 0 cm. Weight 0,76 kg 7 Telescopic tiller extension, adjustable from 70 to 00 cm, stand up rubber articulation. Weight 0.708 kg 7 6 Telescopic tiller extension, adjustable from 80 to 0 cm, stand up rubber articulation. Weight 0.798 kg 6 Tiller extension with handle 7 0 Non retractable tiller extension length 8 cm. Weight 0.78 kg 7 Non retractable tiller extension length 70 cm. Weight 0.06 kg Tiller extension 7 0 Tiller extension length 70 cm universal ball joint. Weight 0. kg 7 0 Tiller extension length 9 cm universal ball joint. Weight 0.6 kg Tiller extension 7 Non retractable tiller extension length 70 cm removable universal joint. Weight 0.8 kg 7 Non retractable tiller extension length 9 cm removable universal joint. Weight 0. kg Carbon tiller extensions 67 Carbon tiller extension length 9 cm - flexible and quick release universal joint. Weight 0. kg 67 Carbon tiller extension length cm - flexible and quick release universal joint. Weight 0. Kg 7 8 Retaining clips 6 7 00 Retaining clip (tube 0 dia.). Weight 0.0 kg 7 7 0 Retaining clip (tube 0 dia.). Weight 0.0 kg 9 Spare articulations 0 9 7 0 Spare articulation for parts # 70, 7. Weight 0.6 kg 9 7 06 Spare articulation for parts # 7, 76. Weight 0.6 kg 0 7 07 Spare articulation for parts # 70, 7, 7, 76. Weight 0.68 kg 7 0 Spare articulation for parts # 70, 70 6 7 8 9 0 Wind indicators Phosphorescent wind indicators Wichard wind indicators, designed using wind tunnel technology, offer remarkable stability. Their glass fibre shafts can bend without breaking. The low-friction pivot ensures precision, sensitivity, and a long service life. These are real navigation instruments that can be mounted with ease on any type of mast, even utilising existing mounting brackets. Wind indicators 7 0 Phosphorescent wind indicator, length 8 cm. Weight 0.8 kg 7 0 Wind indicator, length cm. Weight 0.090 kg
Knives "patented" Our knives are stylish, practical, and comfortable to hold, but first and foremost they are made to last. They are very robust, and their half-serrated blades allow abrasive materials to be cut without damaging the curing edge, ensuring theses knives many years of service, true to Wichard s tradition of quality. The various additional functions featured will allow you to select the model that is most appropriate for your needs. With the leather or fabric sheath, that can be attached to your belt so you can pull out the knife either vertically or horizontally, you can always have your folding knives within reach without experiencing any disruptions during manoeuvres. 6 Forged Handle 0 08 Forged stainless steel handle, blade and shackle key. Weight 0.0 kg 0 08 Forged stainless steel handle, blade, shackle key and cork-screw. Weight 0.0 kg 0 08 Forged Titanium handle, nitrided blade, with shackle key. Weight 0. kg 7 8 9 6 7 Colour Handle 0 0 Green Single blade. Weight 0.07 kg 0 0 Fluorescent 0 0 lack 0 0 Purple 0 09 Orange Fully serrated blade. Weight 0.07 kg 0 0 Green lade, shackle key and bottle opener. Weight 0.090 kg 0 0 Fluorescent 0 0 lack 0 0 Purple 0 06 lue 6 0 0 Grey Soft handle. Weight 0.09 kg 7 0 06 leu Plain blade. Weight 0.078 kg 0 6 8 9 8 0 06 Green Locking blade, shackle key and spike. Weight 0. kg 8 0 06 Fluorescent 8 0 06 lack 8 0 06 Purple 8 0 066 lue 9 0 0 Green «One hand» stainless steel knife with quick opening shackler 9 0 0 Fluorescent and safety liner lock on the blade. Weight 0.0 kg 9 0 0 lack 9 0 0 Purple 9 0 06 lue
0 Long knife, with sheath 0 006 Length 0 cm, 0 cm blade. Weight 0.09 kg 0 007 Length cm, cm blade. Weight 0.6 kg Floating knife, fixed blade 0 009 Length 9 cm, 7 cm blade. Weight 0.096 kg Multi-tool knife With its forged High Resistance stainless steel pliers, our multi-tool knife is a professional s tool that is always there when you need it. Featuring a light-weight slim-line design that allows it to be stored right away in its belt holder, you will soon find it an essential tool which you won t want to be separated. 0 09 Fluo Serrated blade, screw-driver, cutting and stripping tool, bottle 0 09 Noir and can opener. The adjustable pliers are forged from High Resistance (HR) stainless steel for strength and durability. Supplied with sheath. Weight 0. kg Sheaths 0 0 Fabric sheath for folding knives. Weight 0.0 kg 0 0 Leather belt sheath for folding knives. Weight 0.0 kg 0 00 Rigger's leather sheath, for 0 cm fixed blade knife and shackle key/marlin spike. Weight 0.6 kg Miscellaneous 6 7 8 9 0 Part Number 00 Forged shackler with bottle opener. Weight 0.0 kg 00 Unique shackler / spike tool. Weight 0.09 kg 90 Wichard lanyard. Weight 0.00 kg 9 0 Key ring with pin shackle #. Weight 0.07 kg 9 0 Key ring with snap hook # 80. Weight 0.09 kg 9 06 Key ring with snap shackle # 70. Weight 0.09 kg 9 07 Key ring with block # 009. Weight 0.09 kg 6 7 8 9 0 7