Hot and Cold Plumbing Manifold Systems

Hot and Cold Plumbing Manifold Systems

Hot and Cold Manifold Overview By using an Emmeti manifold system in a point to point plumbing configuration you can greatly reduce the number of joints in your system, speeding up installation time and vastly reducing the chances of a leak. A manifold system also allows you to reduce certain pipe sizes per outlet, which will save on material and installation cost (e.g. WC feed with 0mm and shower feed with mm). Point to Point Manifold Plumbing Point to point plumbing is a method of installation using a manifold to distribute hot and cold water to items of sanitaryware and appliances around the property (such as washing machines, sinks, baths, dishwashers, and so on). Each individual outlet is supplied using a continuous length of pipe from the manifold, with joints at the outlet and at the manifold only. This reduction of joints in the system reduces installation time and vastly decreases the potential for leaks, which can lead to costly repair claims and damage to reputation. The examples below show how the use of a manifold eliminates all concealed intermediate joints (that could potentially leak) against the conventional method of installation. The pipe distributed to each outlet can be tailored to suit individual requirements i.e. mm to shower and 0mm to basin and WC. The manifold shown also allows for isolation at each outlet in the event of any repair work or maintenance. Manifold Joint Point to Point Plumbing Traditional Branch Plumbing A joint in a water system is the most likely place for a leak to occur. We offer the ability to greatly reduce this potential risk by reducing the number of joints in the system. The table here shows the principles of point to point plumbing. There is a huge difference in the number of joints between traditional branch and point to point systems (up to 70%), saving installation time and vastly reducing the potential for a leak. The reduction in fittings along with the speed of installation can offset any additional costs incurred when purchasing the manifold and additional pipe. Point to point example Number of fittings (Tees & Elbows) Number of joints 0 Branch example 7 0 For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifolds A range of WRAS approved brass manifolds for use with hot and cold point to point plumbing systems. Available with inividual outlet isolation in ¾, and ¼ sizes between and ways. Pipe and Accessories Manifolds Accessories Gerpex WRAS approved Multi-layer Composite Pipe for use in point to point systems. Available in rolls with diameters of, 0,, mm and in bars, 0,,, 0, 0,, 7mm. The pipe on rolls is also available pre-insulated with closed cell expanded polyethylene sheath, cross-link coating to protect against heat loss and freezing. Emmeti Monoblocco connectors are patented, WRAS and BBA approved single piece adaptors available to suit pipe sizes 0-0mm and pipe types (PB, PE-Xa, PE-RT, MLCP, & copper). Pipe preparation and cutting tools available for all sizes. A wide range of accessories are available to suit Emmeti hot and cold plumbing manifolds such as on and in wall metal cabinets, mounting brackets, and blanking plugs. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifolds TopSan manifold with isolating taps ¾ Manifold Distance between takeoffs : mm Manifold mm 0mm Distance between takeoffs : 0mm TopSan manifold assembly Description Ways Pcs/Pack Code Unit Price ¾ 0800.0 ¾ 080 8.0 ¾ 080. ¾ 080.0 ¾ 0808 0.9 ¾ 7 0800 9.9 ¾ 8 080 80.98 ¾ 9 080 88. ¾ 0 080 00.0 ¾ 0808 07.70 ¾ 08070.90 0808.7 0808.7 08088 7.70 For Copper, MultiLayer, PEX, PP, PB pipe. Please order two rails, one rail for hot and one for cold supply. Separate blue and red outlet identification labels are shipped with each order. These labels are applied by the installer on site. For mm interaxial spacing a 7mm spanner is required, code: 0008 or 000. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. Ball Valves A range of ¾ and Ball Valves are available. For the complete range please refer to system components or visit our website www.emmeti.co.uk Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB, PE-X, PE-RT, MLCP and Copper. For the complete range, please refer to the relevant pages within this section or visit our website www.emmeti.co.uk Manifold Code 0800 (way) to 08070 ( way) ¾ Code 0808 ( way) to 08088 ( way) Blanking Plug Code 900080 ¾ M with O-ring seal Code 900080 M with O-ring seal Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code 0000 00mm or Code 0098 00mm. Brackets Code 000 ¾ Plastic Bracket Supports Code 000 Plastic Bracket Supports Sold in boxes of 0 pairs. Additional Bracket Options Single Metal Brackets (Sold in pairs) Code 90000 - ¾ Code 9000 - Double Metal Brackets (Sold in pairs) Code 9000 - ¾ 00mm centres Code 9000 00mm centres For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifolds (continued) Multiplex sanitary manifold with isolating taps mm Distance between takeoffs : mm Bridging piece for Multiplex manifold Multiplex manifold assembly Description Ways Pcs/Pack Code Unit Price ¾ 0070 8.9 ¾ 007.79 ¾ 00770. 00780 9. 0078 7.8 00790.97 For copper, MultiLayer, PEX, PP, PB pipe. Please order two rails, one rail for hot and one for cold supply. Separate blue and red outlet identification labels are shipped with each order. These labels are applied by the installer on site. For mm interaxial spacing a 7mm spanner is required, code: 0008 or 000. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. ¾ 00700.0 0070.0 A bridging piece to allow extension of Multiplex manifolds. Note: Not suitable for Modular manifolds. Alternative is to use TopSan series. Ball Valves A range of ¾ and Ball Valves are available. For the complete range please refer to section system components or visit our website www.emmeti.co.uk Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB, PE-X, PE-RT, MLCP and Copper. For the complete range, please refer to the relevant pages within this section or visit our website www.emmeti.co.uk Manifold Code 0070 ( way) to 00770 ( way) ¾ Code 00780 (way) to 00790 ( way) Blanking Plug Code 900080 ¾ M with O-ring seal Code 900080 M with O-ring seal Plastic Brackets Code 000 ¾ or 000. Sold in boxes of 0 pairs. Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code 0000 00mm or Code 0098 00mm. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifolds (continued) Topway SN ¾ distribution manifold mm Topway SN distribution manifold Distance between takeoffs : mm 0mm Distance between takeoffs : 0mm Description Ways Pcs/Pack Code Unit Price ¾ 090 7.87 ¾ 09.89 ¾ 09 9.8 ¾ 09.8 ¾ 098.0 ¾ 7 0970 8.07 ¾ 8 097. ¾ 9 097 0. ¾ 0 097 70.88 ¾ 0978 77.0 ¾ 0980 8.8 A distribution only manifold in nickel plated brass. ¾ F connection at each end with x9 outlet connection. ½ F port for connection of a manual or automatic air vent if required. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. Description Ways Pcs/Pack Code Unit Price ¾ 0990 0. ¾ 099 7.9 ¾ 099.0 ¾ 099.7 ¾ 0998 0. ¾ 7 0900 8. ¾ 8 090. ¾ 9 090 7. ¾ 0 090 8. ¾ 0908 9. ¾ 090 0.00 0980. 098. 098 9.9 098 7.99 0988.0 7 0980. 8 098 7.7 9 098 8.8 0 098 9.0 0988 0.0 0980.00 ¼ 09.9 ¼ 09. ¼ 098.9 ¼ 7 090 7.87 ¼ 8 09 8.0 ¼ 9 09 9.7 ¼ 0 09 07.0 ¼ 098 9.0 ¼ 090 8.0 A distribution only manifold in nickel plated brass. ¾ or F connection at each end with x9 outlet connection. ½ F port for connection of a manual or automatic air vent if required. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifolds (continued) Topway SN manifold assembly Ball Valves A range of ¾, and ¼ Ball Valves are available. For the complete range please refer to section system components or visit our website www.emmeti.co.uk Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB,PE-Xa, PE-RT, MLCP and Copper. For the complete range please refer to the relevant pages within this section or visit our website www.emmeti.co.uk Manifold Code 090 -way to 0980 -way ¾ mm ctrs. Code 0990 -way to 090 -way ¾ 0mm ctrs. Code 0980 -way to 0980 -way 0mm ctrs. Code 09 -way to 090 -way ¼ 0mm ctrs. Order per set Blanking Plug Code 900090 ½ M with O-ring seal Blanking Plug Code 900080 ¾ M with O-ring seal Code 900080 M with O-ring seal Code 9000070 ¼ M with O-ring seal Double Metal Brackets 0mm centres Code 9000 ¾ Code 90070 Code 90080 ¼ supplied in pairs Additional Bracket Options Single Metal Brackets (Sold in pairs) Code 90000 - ¾ Code 9000 - Code 9000 - ¼ Plastic Brackets (Sold in packs of 0 pairs) Code 000 - ¾ Code 000 - Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code 0000 00mm or Code 0098 00mm. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifolds (continued) Modular simple manifold mm Distance between takeoffs : mm Modular manifold assembly Description Ways Pcs/Pack Code Unit Price ¾ 0000 7.7 ¾ 000 0.8 ¾ 000.0 0000 9.7 000.0 000. For copper, MultiLayer, PEX, PP, PB pipe. For use with plastic brackets. For mm interaxial spacing a 7mm spanner is required, code: 0008 or 000. For WRAS approved MLCP (MultiLayer Composite Pipe), Emmeti Monoblocco connectors, plastic or metal mounting brackets, blanking plugs and ball valves please refer to the relevant pages within this section. Ball Valves A range of ¾ and Ball Valves are available. For the complete range please refer to section system components or visit our website www.emmeti.co.uk Monoblocco Connectors A range of Monoblocco connectors are available to suit pipe sizes 0mm - 0mm, and different pipe types PB, PE-X, PE-RT, MLCP and Copper. For the complete range please refer to the relevant pages within this section or visit our website www.emmeti.co.uk Manifold Code 0000 ( way) to 000 ( way) ¾ Code 0000 (way) to 000 ( way) Blanking Plug Code 900080 ¾ M with O-ring seal Code 900080 M with O-ring seal Plastic Brackets Code 000 ¾ or 000 Sold in boxes of 0 pairs. Aluminum Slider Rail Order two per manifold or one 00mm slider rail as this can be snapped into two 00mm lengths by hand. Code 0000 00mm or Code 0098 00mm. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Pipe and Accessories Gerpex MultiLayer pipe (PE-X/AL/PE-X) for Plumbing systems 009 Description Coils Code Unit Price /m x 00m 80000. x 00m 8000. x 00m 8000. 0 x 00m 8000.99 0 x 00m 8000.99 x 0m 8000.9 x 0m 80008.7 Description m Bar Code Unit Price /m x 9m * 80800.99 0 x 9m * 8080. x 0m * 8080. x 8m * 80808. 0 x. 0m * 800090 7.0 0 x 0m * 80009.88 x. m * 80009. 7 x m * 800070 8. WRAS approved, layer pipe constructed using PE-Xb-AL-PE-Xb up to mm with PE-Xb-AL-PE-HD from 0mm to 7mm. Available in coils up to mm and in metre bars throughout the range. Maximum operating pressure 0 bar, maximum operating temperature 9 o C. * Packs of m bar lengths, subject to transport surcharge, see carriage and delivery terms on page. Gerpex Insulated MultiLayer pipe (PE-Xb-AL-PE-Xb) for Plumbing systems 009 Description Insul. Thick Coil Code Unit Price /m x mm 0m 8008. x mm 00m 8000. 0 x mm 0m 800.88 0 x 9mm 0m 800. x 9mm 0m 80880.8 x 9mm m 8087.7 WRAS approved, layer pipe constructed using PE-Xb-AL-PE-Xb. Available in coils up to mm. Insulation thickness mm up to 0mm pipe and 9mm insulation thickness for sizes 0, and mm pipe. Maximum operating pressure 0 bar, maximum operating temperature 9 o C. Gerpex MultiLayer Composite Pipe (Insulated and Colour Coded) 009 Description Colour/Insul. Thick Coil Code Unit Price /m x Red / mm 00m 800. x Blue / mm 00m 80. 0 x Red / mm 0m 80.9 0 x Blue / mm 0m 80.88 x Blue / 0mm 0m 800. 0 x Blue / mm 0m 80. x Blue / mm m 80870. x Blue / mm m 8087 7. WRAS approved, layer pipe constructed using PE-Xb-AL-PE-Xb. Available in coils up to mm. mm and 0mm avilable in both red and blue. and mm available only in blue. Maximum operating pressure 0 bar, maximum operating temperature 9 o C. Gerpex Multilayer Composite Pipe in Corrugated Conduit Description Colour Coil Code Unit Price /m x Red 0m 800.0 x Blue 0m 800.0 Description: x mm Gerpex MLCP encased within flexible conduit. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk 7

Pipe and Accessories (continued) Monoblocco connector for plastic PB polybutylene pipe Description Thread Pcs/Pack Code Unit Price 0 x9 8008. x9 8000. Monoblocco connector for copper pipe Monoblocco connector for MLCP MultiLayer composite pipes Monoblocco connector for PE-X, Pure PE-RT and PP Please ensure you use the plastic pipe insert pro vided for by the manufacturer of the pipe you are using. Description Thread Pcs/Pack Code Unit Price 0 x9 00.8 x9 0.8 Description Thread Pcs/Pack Code Unit Price x. x9 800. x x9 800.98 x x9 8008.8 x. x9 8000.98 8 x x9 800.9 0 x x9 800.88 0 x. x9 8007. x x. 8008 7.0 Note: Manifolds with x9 takeoff connections can be adapted for use with x. Monobloccos by using the following fitting: x9f - x.m, code 00. See page 0. Description Thread Pcs/Pack Code Unit Price x x9 8000.0 x x9 800.0 x.7 x9 800.0 x. x9 800.9 x x9 808.99 x. x9 800.9 7 x x9 80.9 0 x x9 80.0 x. x9 8008* 7. Not suitable for use with MLCP Pipe, see correct connector above. Note: Manifolds with x9 takeoff connections can be adapted for use with x. Monobloccos by using the following fitting: x9f - x.m, code 00. See page 0. * Available while stocks last. MLCP to Copper Connectors x - mm 800. 0x - mm 80.98 x - 8mm 09R0 9. A Monoblocco fitting developed to allow MLCP to be connected to standard copper compression fittings. For example, mm MLCP can be connected to a mm lever valve by using code 800. 8 For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Pipe and Accessories (continued) Pipe shears Ø - 8009. Spare blade 8009 8.0 Pipe shears with guide Rotary pipe slices Leakage test plug for MultiLayer Pipe - ½ F fitting Ø - 80808 0.0 Spare blade 8080.8 Pipe slice Ø - 8009 0. Spare wheel 80098 9.8 Pipe slice Ø - 7 8008 79.0 x 808.9 0 x 8088.8 Complete with ½ F Fitting for air release valve (provided standard) or pressure gauge (optional). Flarer and calibrator for MultiLayer pipe Ø U98000 7. Ø 0 U98000 8.8 For preparing the cut end of pipe prior to insertion of fitting. Manifold Accessories Backless on-wall manifold cabinet for heating manifolds L00 (80 x 0 x ) U9800 7.87 L 0 (0 x 0 x ) U980 77. L80 (0 x 0 x ) U980 90. L80 (80 x 0 x ) U980 0.00 L00 (00 x 0 x ) U980.90 L0 ( 0 x 0 x ) U980 9.00 A range of backless metal cabinets designed to be fitted once the manifold has been fitted, tested, commissioned and decoration has been completed. Please see cabinet sizing technical guide at www.emmeti.co.uk for correct selection. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk 9

Manifold Accessories (continued) Manifold cabinet in galvanized steel with white enamelled door Key lock for in wall manifold cabinets Termobox - white plastic universal manifold box Copper adaptor; brass chrome-plated L00MM (0 x 00 x 80-0) 0000 99.8 L700MM (70 x 00 x 80-0) 000.00 L80MM (90 x 00 x 80-0) 000.00 L000MM (00 x 00 x 80-0) 0008 7.00 L00MM (0 x 00 x 80-0) 000 9.70 Door to fit flush with finished surface. Box for manifolds, flush fitting with adjustable depth. Supplied complete with quarter turn catch, feet adjustable for height from 0 to 00mm and cover for protection during site work. Key lock can be purchased separately see code 90000. Key lock 90000.9 0 x 0 x 90 00090 8.7 0 x 0 x 90 0000. 0 x 0 x 90 000 9. Integrated into the back panel of the box are two slider rails, to support an upper and lower manifold when used with slider rail brackets. Suitable for use with hot and cold plumbing manifolds, as well as heat ing manifolds. Knock out panels allow for pipe distribution on all sides. For manifold sizing information, please see our website www.emmeti.co.uk 0700 mm copper x M BSP U9008. mm copper x ¾ M BSP U9000.9 Straight male fitting ½ - x. ½ M BSP - x. 000.9 Complete with O-ring on ½ BSP male side. Straight fitting female x9 - male x. x9 - x. 00 7.8 Complete with O-ring and adaptor for female connection Straight swivel adaptors, nickel-plated M x M 00.09 ¼ M x ¼ M 000 9. ¼ M x M reducer 00. ¾ M x ¾ M 00. Allows orientation of product during installation. 0 For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifold Accessories (continued) Straight male-male adaptors M x M with O-ring seal 9000700.7 ¼ M x ¼ M with O-ring seal 900090 8.8 For bridging between Topway manifolds. Blanking plugs, male and female Female washers Reducer fittings, nickel-plated ½ M with O-ring seal 900090. ¾ M with O-ring seal 900080.0 M with O-ring seal 900080.77 ¼ M with O-ring seal 9000070. ¾ F (*) 09.8 F (*) 098.9 x9 F with O-ring seal 00. (Manifold outlet cap) (*) Use the appropriate washer (9000800 or 900080) shown below when ordering these items. ¾ F 9000800 0. F 900080 0. ¾ M x a F 900000.0 ¾ M x ½ F 900080. M x a F 900000. M x ½ F 900080. M x ¾ F 9000870.0 ¼ M x ½ F 9000080.0 ¼ M x F 900008.87 ½ M x ¼ F with O-ring seal and gasket 00.08 Metal brackets for Topway manifolds, pairs of single brackets Description Pcs/Pack Code Pair Price ¾ Pair 90000 7.78 Pair 9000 7.8 ¼ Pair 9000 7.89 Metal brackets for Topway manifolds, pairs of double brackets Description Centres Pcs/Pack Code Pair Price ¾ 00mm Pair 9000.9 00mm Pair 9000.0 ¼ 00mm Pair 9000. ¾ 0mm Pair 9000.7 0mm Pair 90070.8 ¼ 0mm Pair 90080.0 For use when fitting a manifold to either a 00mm or 0mm centre control group. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifold Accessories (continued) Plastic bracket support kits for Topway and TopSan manifolds Description Size Pcs/Pack Code Pack Price 0 pairs bracket support kit ¾ 000.88 0 pairs bracket support kit 000.88 To be used with slider rails or Termobox cabinet. Plastic bracket support kits for Modular and Multiplex manifolds Aluminium slider rail for bracket support kits supplied with screw and rawlplug pack Insulating shells for Topway manifolds Extension piece for Topway manifolds Description Size Pcs/Pack Code Pack Price 0 pairs bracket support kit ¾ 000 0. 0 pairs bracket support kit 000 0. To be used with slider rails or Termobox cabinet. 00mm 0098 9.88 00mm 0000.7 Provided with two.mm DIA pre-drilled holes. The 00mm version is provided with four.mm DIA pre-drilled holes, in two pairs spaced 0mm apart. Kiss cut at 00mm. ¼ 000 9. In extruded polyethylene. branch holes at 0mm intervals. To be cut to size according to the number of ways of the manifold to be insulated. M-F c/w ½ blanked port 00 0.9 M-F ¼ no port 00.9 Used to offset either the flow or return angled ball valves on the left side of a manifold. It allows you to run pipe vertically and parallel. 7 mm Spanner for straight swivel adaptors 7mm - 8mm AF 7-8mm 000.90 Two are required when tightening swivel adaptors. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk

Manifold Accessories (continued) 7mm-0mm AF spanner for tightening x9 Monoblocco connectors 7-0mm 0008 7. Design to easily tighten the takeoff connections in the mm interaxial space provided. The 0mm jaw is designed for use with larger Monoblocco connec tors. 7mm AF spanner for tightening x9 Monoblocco connectors 8mm AF spanner for x.mm Monoblocco connectors 7mm 000 7. For Monoblocco connectors up to dia 8mm only. Shoulderless spanner for manifolds with mm interaxials. 8mm 8700.0 To be used for the tightening of Monoblocco connectors x. on the takeoff connections of Topway manifolds with 0mm connector spacing. For more information please call us on 099 8900 or view our website at www.emmeti.co.uk