ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps 52H-3E Series Enclosed Manual Clamp
2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling, IL USA Auburn Hills, MI USA France Germany Spain China Brazil India Thailand THE BEST PRODUCTS. UNMATCHED SERVICE. WORLDWIDE. With a support network spanning the globe, DE-STA-CO offers consistent, comprehensive service to any location in the world. Whether your operations are localized or span multiple continents, you will always have access to the highest levels of customer service and technical support. Since our founding in 1915, DE-STA-CO continues to provide innovative workholding and automationproduct solutions. We are honored to work alongside our global-customer base to achieve our key mission, which encompasses: Providing world-class service and operational excellence Increasing customer productivity through customized solutions Developing products to meet unique application needs Consistency in our on-time delivery promise Ensuring top value throughout our product catalog DE-STA-CO provides productivity solutions to a diverse range of market segments Aerospace Automotive/transportation Consumer products Food and packaging Plastic injection molding Medical Defense Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps3 Series 52H-3E Features & Benefits DE-STA-CO s 52H-3E Series manual power clamps are built to withstand the harshest of manufacturing environments and deliver superior clamping power. Compact, enclosed aluminium body Toggle action mechanism with locking unit for open position Handlever can be welded in correct position Handlever can be mounted left or right side of body Interchangeable with pneumatic clamp 82M-3E Opening angle (nearly stepless) adjustable between 0-135 Wide range of clamping arm variants Multiple mounting surfaces provide greater flexibility Conform to NAAMS and Euro mounting standards Inductive sensing module with LED display Two clamp sizes available: 50mm and 63mm Hand lever position is adjustable for improved ergonomics. Easily adjust arm opening angle with an M5 Allen wrench. 1 Move clamp arm to full open position. 2 Using Allen wrench, release mechanism (leave Allen wrench in place). 3 Move clamp arm to desired opening. 4 Tighten to 20 Nm. PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
4 52H-3E Series Enclosed Manual Clamps Series 52H-3E Ordering Information 52H-3 23 E H0 50 L8 Base Model Mounting E N Description Standard NAAMS (Size 63 only) Clamp Arm Shaft Description 03 for U-Arms 23 for Lateral Arms D0 for Lateral Arms (size 63 only) Handle H0 HS Description Hand lever Hand Lever (Weldable) See below for further details Hand Lever H0 Shown with U-Arm (order separately) Clamp Arm Shaft 03 23/D0 HS Size Shaft Length (L17) 50 12mm 63 12mm 23 Size Shaft Length (L17) 50 21mm 63 21mm D0 Size D0 Shaft Length (L17) 26mm Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps5 Series 52H-3E Ordering Information Sensor Description 00 No sensor L8 Sensor with In-line Connector (Replacement Order No.: 8EA-146-2) L9 Sensor with 90 deg Connection (Replacement Order No.: 8EA-147-2) K8 Sensor with Cable Connection (Replacement Order No.: 8EA-158-2) L8 L9 K8 Size Description 50 Size 50mm 63 Size 63mm 52H-3E03H050L8 Modular manual clamp, interchangeable with 82M-3E...50/63 50 63 Max Holding Torque Max Holding Torque 1300 Nm 1800 Nm PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
6 52H-3E Series Enclosed Manual Clamps Series 52H-3E...50 Standard Dimensions Model Max. Holding Torque (Nm) Weight (kg) B23 max. L17 52H-3E03H050.. 2,75 72 12 1300 52H-3E23H050.. 2,79 90 21 Swivel Angle a2 (with reference to opening angle of clamping arm) 0 15 30 45 60 75 90 105 120 135-1 30 39 46 53 61 70 81 92 103 Plan View 47,6 48 B23 max. 95 107 26,5 Dimensions of the Driven Shaft Hand Lever, Left Hand Lever, Right 111,5 45 5 ±0,02 for Ø8H7 80 50 ±0,02 for Ø10H7 13 10 5 SW19 h9 L17 48 M8 (10 deep) Pivot Point 63,5 ±0,05 36,5 Notice! The hand lever is supplied loose enclosed. Easy custom left hand or right hand mounting in required position. 246 45 55 ±0,02 for Ø10H7 45 40 ±0,02 for Ø8H7 M10 (9,5 deep) H7 Ø10 (10 deep) H7 Ø8 13 (10 deep) 21,5 25 Ø30 9 Ø8 H7 (12 deep) 5 3,8 M8 (12 deep) 11 32 43 +0,1 0 55 125 76 30 ±0,02 for Ø8H7 20 52 76 44 3,5 N9 71,5 12 20 20 Hand lever can be mounted in 3 positions a2 ±10 1 Ø38 70 ~R218 74 Spare parts Specification Base component Order no. Comment Hand lever set (weldable) Hand lever set welded Sensor box Weight [kg] 10 9 8 7 6 5 4 3 2 1 0 100 125 150 175 200 225 250 275 300 Distance from pivot point to center of mass [mm] 52H-3E...50 Maximum Tooling Weight 8KB-098-1 8KB-102-1 8EA-146-2 (L8) 8EA-147-2 (L9) Connector 180 Connector 90 Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps7 Series 52H-3E...63 Standard Dimensions Model Max. Holding Torque (Nm) Weight (kg) B7a B23 max. L17 52H-3E03H06... 50 12 3,5 78 52H-3N03H06... 55 21 1800 52H-3E23H06... 50 12 3,6 96 52H-3N23H06... 55 21 Swivel Angle a2 (with reference to opening angle of clamping arm) 0 15 30 45 60 75 90 105 120 135 0 30 39 47 56 66 79 94 108 119 Plan View 52 54 B23 max. 101,5 26,5 5 112,5 111,5 80 B7a ±0,02 for Ø10H7 13 10 SW22 h9 Dimensions of the Driven Shaft L17 Hand lever, Left 54 Hand lever, Right Pivot point 63,5 ±0,05 36,5 Notice! The hand lever is supplied loose enclosed. Easy custom left hand or right hand mounting in required position. 263 55 45 ±0,02 for Ø10H7 M10 (10 deep) Ø10 8,5 H7 (10 deep) 21,5 25 9 5 M8 H7 8 (12 deep) 11 (12 deep) 32 43 0,1 0 55 + 137 20 3,5 30 ±0,02 for Ø8H7 71,5 12 N9 20 20 76 52 51 Ø30 79 Hand lever can be mounted in 3 positions ±10 ~R218 100,5 14 12 10 Maximum Tooling Weight a2 Weight [kg] 8 6 4 Ø38 70,5 Spare parts Specification Base component Order no. Comment Hand lever set (weldable) Hand lever set welded Sensor box 2 52H-3E...50 0 100 125 150 175 200 225 250 275 300 Distance from pivot point to center of mass [mm] 8KB-098-1 8KB-102-1 8EA-146-2 (L8) 8EA-147-2 (L9) Connector 180 Connector 90 PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
8 52H-3E Series Enclosed Manual Clamps Series 52H-3E****5*** U-Arms Center (Steel) 64,5 30 ±0,2 90 Ø6 H7 Ø9 48,1 + 0,2 0 ~19 20 ±1,2 (9) 95 30 ±0,02 105 180 version 20±1,2 180 90 version 28 SW19 + - 0,020 0,009 144 ~R7 Opening Pivot point Area of interference hold-down piece must not protrude in the interior area "R75" due to the area of interference 8UM501-15-144 8UM501-25-144 8UM501-45-144 Arm Model No. 8UM501-15-144 90º Version 180º Version 105º Weight 8UM501-25-144 135 120º 1,1 25 8UM501-45-144 135 45 15 Series 52H-3*****6*** U-Arms Center (Steel) Ø6 H7 B4 30 ±0,2 90 Ø9 20 ±1,2 (9) 30 ±0,02 +0,2 54,1 0 B26 B11 180 version ~19 20±1,2 180 B2 ~R80 Area of interference hold-down piece must not protrude in the interior area "R80" due to the area of interference 90 version L4 Opening SW22 + - 0,020 0,009 Pivot point 8UM631-15-144 8UM631-25-144 8UM631-45-144 8UM631-75-204 Arm Model No. 8UM631-15-144 90º Version 180º Version Weight B2 B4 105º 1,1 15 8UM631-25-144 115º 1,2 144 64,5 105 95 28 25 135 8UM631-45-144 1,3 45 135 8UM631-75-204 1,7 204 82 165 107 30 75 B11 B26 L4 Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps9 U-clamp arm, right 95 Series 52H-3E****5*** U-Arms Offset (Steel) 90 Left 90 Right 34 Ø6 H7 30 ±0,2 Ø9 48,1 +0,2 0 ~19 20 ±1,2 U-clamp arm, left (9) 30 ±0,02 64,5 180 version 144 105 ~R75 20±1,2 Area of interference Hold-down piece must not protrude in the interior area "R75" due to the area of interference 180 Right* 180 Left* 90 version 28 Opening SW19 + - 0,020 0,009 Pivot point 8U01-15-144 8U01-25-144 8U01-45-144 8UR501-15-144 8UR501-25-144 8UR501-45-144 * 90 left/180 right uses same clamp arm. 90 right/180 left uses same clamp arm. Arm Model No. 8U( )501-15-144 90º Version 180º Version Weight 105º 1,1 15 1,2 25 8U( )501-25-144 135 120º 8U( )501-45-144 135 45 U-clamp arm, right B26 Series 52H-3E****6*** U-Arms Offset (Steel) 90 Left 90 Right 37 Ø6 H7 Ø9 30 ±0,2 0,2 + 0 54,1 ~19 U-clamp arm, left ±1,2 20 (9) 30 ±0,02 B4 B11 180 version B2 ~R80 20±1,2 Area of interference Hold-down piece must not protrude in the interior area "R80" due to the area of interference 180 Right* 180 Left* 90 version L4 SW22 + - 0,020 0,009 Arm Model No. 8U( )631-15-144 90º Version Pivot point Opening 180º Version Weight B2 B4 105º 1,2 8UL631-15-144 8UL631-25-144 8UL631-45-144 8UL631-75-204 15 8U( )631-25-144 120º 1,2 144 64,5 105 95 28 25 135 8U( )631-45-144 1,3 45 135 8U( )631-75-204 1,9 204 82 165 119 30 75 B11 B26 L4 8UR631-15-144 8UR631-25-144 8UR631-45-144 8UR631-75-204 * 90 left/180 right uses same clamp arm. 90 right/180 left uses same clamp arm. PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
10 52H-3E Series Enclosed Manual Clamps Series 52H-3E****5*** Lateral Arms Clamp arm on the right 90 Left 90 Right Ø6 Ø9 30±0,2 H7 ( 9) 30 ±0,02 105 10 Clamp arm on the left 180 version 74 144 ~R75 R28 Series 52H-3E****6*** Lateral Arms Clamp arm on the right Ø6 H7 Ø9 30±0,2 20 20 180 Left 180 Right 28 90 version SW19 H8 Area of interference hold-down pieces which must be fixed on the clamp arm must not exceed the width "20" of the clamp arm in the swivelling range "R75" on the inner side of the clamp arm Opening Pivot point 8JG-070-1-01 8S501-25-144 Arm Model No. 8JG-070-1-01 90º Version 180º Version Weight (kg) 0,9 15 135 135º 8S501-25-144 1,0 25 Models with 2 lateral clamp arms requires 2 clamp arm sets. 90 Left 90 Right 10 ( 9) 30±0,02 B11 Clamp arm on the left L4 180 version B2 B4 ~R80 Area of interference hold-down pieces which must be fixed on the clamp arm must not exceed the width "20" of the clamp arm in the swivelling range "R80" on the inner side of the clamp arm 180 Left 180 Right 90 version SW22 H8 R28 Opening Pivot point 8JG-080-1-01 8S631-25-144 8S631-45-144 8S631-75-204 Arm Model No. 8JG-080-1-01 90º Version 180º Version Weight (kg) 0,9 B2 B4 B11 L4 15 8S631-25-144 1,0 144 74 105 28 25 135 135º 8S631-45-144 1,1 45 8S631-75-204 1,5 204 78 165 30 75 Models with 2 lateral clamp arms requires 2 clamp arm sets. Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps11 Series 52H-3E* Lateral (Side) Arms, NAAMS-Style, 50mm 50 OFFSET SERIES R 20.00 25 OFFSET SERIES 50.00 75.00 0 OFFSET SERIES 25.00 15.00 15.00 A 20.00 Ø11.00 THRU TYP Ø8.00 F7 TYP 140.00 125.00 110.00 95.00 80.00 65.00 50.00 0.00 150.00 120.00 90.00 9mm Thru Hole (6.00 H7 Dowel) 90mm [3.54 ] Arm Length 50 Offset s 3256 B8JG-3256-1 25 Offset s 3246 B8JG-3246-1 0 Offset s 3236 B8JG-3236-1 11mm Thru Hole (8.00 F7 Dowel) 90mm [3.54 ] Arm Length 50 Offset s 1226 B8JG-1226-1 25 Offset s 1216 B8JG-1216-1 0 Offset s 1206 B8JG-1206-1 120mm [4.72 ] Arm Length 50 Offset s 3257 B8JG-3257-1 25 Offset s 3247 B8JG-3247-1 0 Offset s 3237 B8JG-3237-1 120mm [4.72 ] Arm Length 50 Offset s 1227 B8JG-1227-1 25 Offset s 1217 B8JG-1217-1 0 Offset s 1207 B8JG-1207-1 150mm [5.90 ] Arm Length 50 Offset s 3258 B8JG-3258-1 25 Offset s 3248 B8JG-3248-1 0 Offset s 3238 B8JG-3238-1 150mm [5.90 ] Arm Length 50 Offset s 1228 B8JG-1228-1 25 Offset s 1218 B8JG-1218-1 0 Offset s 1208 B8JG-1208-1 s Common in North America ( ) STANDARD ARM OFFERING Maximum Opening Angle (shown in locked position) Arm Styles 1206-1208/3236-3238 135 135 100 100 N/A N/A 1216-1218/3246-3248 135 N/A 50 125 N/A 30 1226-1228/3256-3258 125 N/A 35 135 N/A 50 PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
12 52H-3E Series Enclosed Manual Clamps Series 52H-3E* Lateral (Side) Arms, NAAMS-Style, 63mm for 23 Clamp Arm Shaft Option 120 OFFSET SERIES 70 OFFSET SERIES 25 OFFSET SERIES [3.94] 100.00 [2.76] 70.00 [4.72] 120.00 [5.91] 150.00 0 OFFSET SERIES 55.00 [2.17] 25.00 [0.98] 18.00 [0..71] 15.00 [0.59] A R 28.00 [1.10] [0.79] 20.00 Ø9.00 [0.35] THRU TYP Ø6.00 [0.24] H7 TYP 275.00 [10.83] 260.00 [10.24] 245.00 [9.65] 230.00 [9.06] 215.00 [8.46] 200.00 [7.87] 185.00 [7.28] 170.00 [6.69] 155.00 [6.10] 140.00 [5.51] 125.00 [4.92] 110.00 [4.33] 95.00 [3.74] 80.00 [3.15] 65.00 [2.56] 0.00 [11.22] 285.00 [10.04] 255.00 [8.86] 225.00 [7.68] 195.00 [6.50] 165.00 [5.31] 135.00 135mm [5.31 ] Arm Length 120 Offset s 1543 B8JG-1543-1 70 Offset s 1531 B8JG-1531-1 25 Offset s 1519 B8JG-1519-1 0 Offset s 1507 B8JG-1507-1 225mm [8.86 ] Arm Length 120 Offset s 1546 B8JG-1546-1 70 Offset s 1534 B8JG-1534-1 25 Offset s 1522 B8JG-1522-1 0 Offset s 1510 B8JG-1510-1 165mm [6.50 ] Arm Length 120 Offset s 1544 B8JG-1544-1 70 Offset s 1532 B8JG-1532-1 25 Offset s 1520 B8JG-1520-1 0 Offset s 1508 B8JG-1508-1 255mm [10.04 ] Arm Length 120 Offset s 1547 B8JG-1547-1 70 Offset s 1535 B8JG-1535-1 25 Offset s 1523 B8JG-1523-1 0 Offset s 1511 B8JG-1511-1 195mm [7.68 ] Arm Length 120 Offset s 1545 B8JG-1545-1 70 Offset s 1533 B8JG-1533-1 25 Offset s 1521 B8JG-1521-1 0 Offset s 1509 B8JG-1509-1 285mm [11.22 ] Arm Length 120 Offset s 1548 B8JG-1548-1 70 Offset s 1536 B8JG-1536-1 25 Offset s 1524 B8JG-1524-1 0 Offset s 1512 B8JG-1512-1 s Common in North America ( ) STANDARD ARM OFFERING NON-STANDARD ARM OFFERING (extended leadtimes apply) Maximum Opening Angle (shown in locked position) Arm Styles 1510-1512/1507-1509 135 135 100 100 N/A N/A 1522-1524/1519-1521 135 N/A 50 130 N/A 40 1534-1536/1531-1533 115 N/A 25 135 N/A 75 1546-1548/1543-1545 110 N/A 20 135 N/A 85 Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps13 Series 52H-3E* Lateral (Side) Arms, NAAMS-Style, 63mm for D0 Clamp Arm Shaft Option 120 OFFSET SERIES 70 OFFSET SERIES 25 OFFSET SERIES [3.94] 100.00 [2.76] 70.00 [4.72] 120.00 [5.91] 150.00 0 OFFSET SERIES 55.00 [2.17] 25.00 [0.98] 18.00 [0..71] 15.00 [0.59] A R 28.00 [1.10] [0.98] 25.00 Ø11.00 [0.43] THRU TYP Ø8.00 [0.31] F7 TYP 275.00 [10.83] 260.00 [10.24] 245.00 [9.65] 230.00 [9.06] 215.00 [8.46] 200.00 [7.87] 185.00 [7.28] 170.00 [6.69] 155.00 [6.10] 140.00 [5.51] 125.00 [4.92] 110.00 [4.33] 95.00 [3.74] 80.00 [3.15] 65.00 [2.56] 0.00 [11.22] 285.00 [10.04] 255.00 [8.86] 225.00 [7.68] 195.00 [6.50] 165.00 [5.31] 135.00 135mm [5.31 ] Arm Length 120 Offset s 1043 B8JG-1043-1 70 Offset s 1031 B8JG-1031-1 25 Offset s 1019 B8JG-1019-1 0 Offset s 1007 B8JG-1007-1 225mm [8.86 ] Arm Length 120 Offset s 1046 B8JG-1046-1 70 Offset s 1034 B8JG-1034-1 25 Offset s 1022 B8JG-1022-1 0 Offset s 1010 B8JG-1010-1 165mm [6.50 ] Arm Length 120 Offset s 1044 B8JG-1044-1 70 Offset s 1032 B8JG-1032-1 25 Offset s 1020 B8JG-1020-1 0 Offset s 1008 B8JG-1008-1 255mm [10.04 ] Arm Length 120 Offset s 1047 B8JG-1047-1 70 Offset s 1035 B8JG-1035-1 25 Offset s 1023 B8JG-1023-1 0 Offset s 1011 B8JG-1011-1 195mm [7.68 ] Arm Length 120 Offset s 1045 B8JG-1045-1 70 Offset s 1033 B8JG-1033-1 25 Offset s 1021 B8JG-1021-1 0 Offset s 1009 B8JG-1009-1 285mm [11.22 ] Arm Length 120 Offset s 1048 B8JG-1048-1 70 Offset s 1036 B8JG-1036-1 25 Offset s 1024 B8JG-1024-1 0 Offset s 1012 B8JG-1012-1 s Common in North America ( ) STANDARD ARM OFFERING NON-STANDARD ARM OFFERING (extended leadtimes apply) Maximum Opening Angle (shown in locked position) Arm Styles 1010-1012/1007-1009 135 135 100 100 N/A N/A 1022-1024/1019-1021 135 N/A 50 130 N/A 40 1034-1036/1031-1033 115 N/A 25 135 N/A 75 1046-1048/1043-1045 110 N/A 20 135 N/A 85 PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
14 52H-3E Series Enclosed Manual Clamps Order Form Date: Name: Project: Clamping Station: Base Model Mounting E N Description Standard NAAMS (Size 63 only) Clamp Arm Shaft Description 03 for U-Arms 23 for Lateral Arms D0 for Lateral Arms (size 63 only) 03 23/D0 H0 HS Handle H0 HS Description Hand lever Hand Lever (Weldable) 50 63 Size Description 50 Size 50mm 63 Size 63mm Sensor Description 00 No sensor L8 Sensor with In-line Connector (Replacement Order No.: 8EA-146-2) L9 Sensor with 90 deg Connection (Replacement Order No.: 8EA-147-2) K8 Sensor with Cable Connection (Replacement Order No.: 8EA-158-2) L8 L9 K8 52H-3 Dimensions and technical information are subject to change without notice PRODUCT INNOVATION
52H-3E Series Enclosed Manual Clamps15 Notes PRODUCT INNOVATION Dimensions and technical information are subject to change without notice
Workholding Widest variety of workholding products High durability and reliability Flexible solutions for all applications Custom products for unique requirements Automation Broad range of engineered automation products Complementary products for modular integration Unmatched accuracy, reliability and performance Unparalleled global sales, service and engineering support GLOBAL LOCATIONS NORTH AMERICA DE-STA-CO Headquarters Auburn Hills, Michigan Tel: 1.248.836.6700 Toll Free: 1.888.DESTACO Marketing: marketing@ Customer Service: customerservice@ Charlevoix, Michigan Tel: 1.888.DESTACO Customer Service: customerservice@ Wheeling, Illinois Tel: 1.800.645.5207 Customer Service: camco@ Red Wing, Minnesota (Central Research Laboratories) Tel: 651.385.2142 Customer Service: sales@centres.com SOUTH AMERICA Brazil Tel: +55-11-2923-6640 Customer Service: samerica@ ASIA Thailand Tel: +66-2-326-0812 Customer Service: info@ China Tel: +86-21-6081-2888 Customer Service: china@ India Tel: +91-80-41123421-426 Customer Service: india@ EUROPE Germany Tel: +49-6171-705-0 Customer Service: europe@ France Tel: +33-1-3996-5000 Customer Service: france@ UK Tel: +44-1902-797980 Customer Service: uk@ Spain Tel: +34-936361680 Customer Service: spain@ Netherlands Tel: +31-297285332 Customer Service: benelux@ 1025 Doris Road Auburn Hills, MI 48326 USA Tel 1.888.DESTACO Fax 1.248.836.6901 Email customerservice@ Copyright, 2015 DE-STA-CO. All rights for layout, photos and text rest with the publisher DE-STA-CO. All photomechanical or other reproductions only with our express permission. All sales are based on our terms and conditions of sale, delivery and payment. DSC-52H3E-0615-US-XXK