ILLUSTRATED S LIST MODEL NUMBER ST 0P PRODUCT NUMBER 96 9 00-9 MFG. ID. NUMBER 9690090 6-7 Rev.
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 0 6 0 6 7 7 7 9 0.09.0-D NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 6 7 0-0 GEARBOX AUGER CAST IRON / THREAD 9-0 IMPELLER CAST IRON 6 7-0 PULLEY IMPELLER 7.9 SCREW ON 0 90-0 SUPPORT GEARBOX GREY 0 69-0 CHUTE DISCHARGE BASE 6 0-9 BRACKET CORNER DISCHARGE BASE 7-0 BOLT SHEAR /-0 7 0 0-00 NUT NYLOCK /-0 9 7 0-0 BOLT CARRIAGE /6- X -/ 0 69-0 NUT FLANGE NYLOCK /6- BLK 7 - NUT FLANGE TOP LOCK /6-0-0 BOLT CARRIAGE /6- X / BLK 6 - SCREW HEX HEAD /6- X / 69-0 BOLT CARRIAGE WAFER HEAD /6- X / BLK 79- NUT FLANGE NYLOCK /6-6 9-09 BEARING FLANGE NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 X 97 69-0 AUGER HOUSING 0 LS 0-0 SHAVE.PLATE 0 LS MS 7 7 0-0 BOLT CARRIAGE /6- X.6-77 NUT /6- HEX TOP LOCK X 0.09.07-B 6 6 0.09.00-D 97 0-0 AUGER RIBBON RH LS 97 06-0 AUGER RIBBON LH LS 0-0 SUPPORT AUGER BEARING 0- BEARING IDLER 60 00 00- RING RETAINING #00-6 7-0 SCREW /-0 X.6 W/DOG POINT NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 7-7 DRIFT BAR CUTTER 7 9-6 WASHER FRICTION NYLON 7 7 0-06 CARRIAGE BOLT /6- X.7 GR 0 0 0-00 LO CKWASHER /6 SPLIT 6- WING NUT /6- ZINC 0..00-A 0.09.00-A 9-99 TOOL CLEANOUT 6-0 TRIM AUGER HOUSING FRONT ASM 6 0-0 TRIM AUGER HOUSING WING RH 6 0-0 TRIM AUGER HOUSING WING LH 7 67 0- SCREW HEX WASHER TRI-LOBE /-0 X / NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 0..00-A 0 7- SKID PLATE 69 7-0 BOLT CARRIAGE /6- X.70 BLK 69-0 NUT FLANGE NYLOCK /6- BLK NOTE: All component dimensions given in U.S. inches. inch =. mm 6
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 * *7 *6 0.09.00-D -7 LEVER/CABLE ROTATOR ASSEMBLY 7 0-0 THREAD ROLLING SCREW 0- X.00 * 06-7 ROTATOR HEAD * 9 9-0 ROTATOR PIVOT BRACKET * 06-7 PULLEY PIVOT *6-7 CABLE ASSEMBLY ADJUSTABLE *7-0 CABLE ASSEMBLY HEAT SHIELD * * NOTES:. ITEMS INDICATED WITH AN * ARE LISTED AS REFERENCE FOR SERVICE S ONLY. 0..0-B 7-99 STEER CABLE 7 0 0- SCREW 0 X.0 NOTE: All component dimensions given in U.S. inches. inch =. mm 7
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 7 6 * * 6 *0 0- CHUTE WELDMENT - DEFLECTOR WELDMENT 7 0 0-0 DEFLECTOR CONTROL ASSEMBLY 0- DEFLECTOR SEAL 0 67-0 KNOB OVERMOLD BLACK 6 6 - POP RIVET 7 7 0-0 THREAD ROLLING SCREW 0- X.00 0- CHUTE SNOW SHIELD 9 7- SHIELD RETAINER STRAP *0 7 9-9 SHOULDER BOLT /-0 X.7 * 9 7-0 NUT /-0 * 0-0 CARRIAGE BOLT BLACK /6- X / * 7 - NUT /6- * -0 DEFLECTOR SPRING 06-79 (SERVICE ) DEFLECTOR CONTROL 6 7 0 09-0 (SERVICE ) DEFLECTOR CABLE BLACK 6 9 * * 0.09.09-D NOTE:. ALL ITEMS INDICATED WITH AN * ARE PROVIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH PRODUCT.. ITEMS AND 6 ARE SERVICE NUMBERS TO ALLOW PURCHASE OF INDIVIDUAL ITEMS IF NECESSARY. NOTE: All component dimensions given in U.S. inches. inch =. mm
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 - SHIELD DEFLECTOR -7 STRAP 6 0-0 SCREW MACHINE - X.0 BLK 6-0 NUT HEX NYLOCK - - BLK 0..009-B NOTE: All component dimensions given in U.S. inches. inch =. mm 9
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 9 9 7 6 0 0 0 0 0.0.0-B 9-0 CONTROL PANEL 77 9-0 LH CONTROL LEVER 77 97-0 RH CONTROL LEVER 0 90-0 INTERLOCK CONTROL ROD 00 7-0 INTERLOCK BRACKET 6 7 7 0-0 /-0 X.6 HEX HEAD SCREW 7 6- SPACER 0-9 /-0 FLANGE NUT (TOP LOCK) 9 0 67-0 KNOB SOFT TOUCH 0 7-99 HANDLE KNOB 9-6 / WASHER 7 06- CARRIAGE BOLT /-6 X. 6 96-7 RETAINER NOTE: All component dimensions given in U.S. inches. inch =. mm 0
HANDLES SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 0 0 6 6 7 9 9 7 7-0 PLOW HANDLE LH 7-09 PLOW HANDLE RH 9- PANEL BRACKET LH 9-9 PANEL BRACKET RH - HEATED HANDLE GRIP 6 7 7 0- SCREW /6 X.70 7 7 7 0- SCREW /6 X.0 7 - NUT /6 9 - WASHER 0 7 7-7 POP RIVET / 0.0.0-C -0 LOWER HANDLE 6-7 PIVOT SUPPORT WELDMENT 7 00 0-0 SCREW /6- X.70 7 00 06-6 SCREW /-6 X.00 7 00 06- SCREW /-6 X.70 0.0.07-A NOTE: All component dimensions given in U.S. inches. inch =. mm
HANDLES SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 6- INTERLOCK SPRING -9 INTERLOCK CAM - TORSION SPRING 6 96-7 RETAINER 7 06 0-0 SCREW / 0 X.6 6 - INTERLOCK STOP 6 0.0.007-D 6 0.0.07-A - CONSOLE PANEL 77-60 SWITCH GRIP 7-6 SCREW HX WHSR HEAD 0- X. -7 SCREW SHOULDER 0- X.6 6-0 LED LIGHT DUAL STAGE GRAY 6 0 6 6-0 WIRE HARNESS FLOOD / LED HEATED NOTE: All component dimensions given in U.S. inches. inch =. mm
HANDLES SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 9 0 7-0 ROD IMPELLER CONTROL 0-0 ROD TRACTION CONTROL -9 SHIFTER ROD TOP 77- SHIFTER ROD BOTTOM 0-7 SPRING SLEEVE 6 0 79 6-0 SPRING CONTROL ROD 7 0 0-0 SPRING TRACTION ROD 7 7 0-0 CARRIAGE BOLT /6- X.7 9-77 NUT /6-0 6 96-7 RETAINER HAIRPIN NOTE: HOOK TRACTION ROD SPRING IN HOLE 9 HOOK IMPELLER ROD SPRING IN HOLE 0 7 6 0..0-D NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 6 7 0 9 0 0 9 6 0 9 0 7 6 0 6 9 7 0 6 0 7 0 0 9 7 9 0 0.0.009-G NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 - SHIFT BRACKET 7 0-0 THREAD ROLLING SCREW 0- X.00 7 76 0- SCREW /6- X. 7 9-6 PLASTIC WASHER -96 SHIFT ASSEMBLY 6 - WASHER 7 9-9 FRICTION SPRING 7 0 0-00 NUT /6- LOCK 9-7 CABLE MOUNTING BRACKET RH 0-67 SCREW /6- X.70 0 - CONTROL ARM 9-0 CLEVIS PIN 7- REAR PLATE 0 70-79 WASHER 7- CONTROL SHAFT 6-0 STEER LEVER 7-9 PIVOT PLATE - REAR CLUTCH BRACKET 9 9-9 CLUTCH ARM 0 - E-RING.7 0 - SHOULDER BOLT /-0 9 7-0 NUT /-0 SIDELOCK 06 - HAIRPIN RETAINER SMALL -96 STEER ROD 9 - RETURN SPRING 6-6 STABILIZER BRACKET 7 - TRANSMISISON MOUNTING BRACKET 7 0- SCREW /-0 X.00 9 7 76 0-6 BOLT /6- X.00 0 7 - NUT /6- TOP LOCK 9 - CLUTCH SHAFT 6-9 CLUTCH ROD 70 0-79 RETAINER CLIP -99 SPEED CONTROL ROD 6 96-7 HAIRPIN RETAINER LARGE 6 9-0 FRONT CLUTCH BRACKET 7 0- CARRIAGE BOLT /6- X.6-9 HYDROSTATIC TRANSMISSION 9 7 - BRAKE SPRING 0-9 BOTTOM PAN -7 SHOULDER SCREW 0-0 -7 WASHER 7 0 0-00 NUT /-0 NYLOCK 0 6- RETURN SPRING 99-0 BELT GUIDE HYDRO NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 0.0.00-C 7-7 RIVET 9- THRUST WASHER 7- RETAINER NOTE: All component dimensions given in U.S. inches. inch =. mm 6
CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 0.00.06-A - - 7 7-0 COMPLETE LCT ENGINE PWHK0007D 6 0 7-0 FRAME 0-06 BOLT /-6-67 SCREW /6- X.70 9-69 ENGINE MOUNTING PLATE 0.0.00-A 6- COVER ASSEMBLY 0..0-C NOTE: All component dimensions given in U.S. inches. inch =. mm 7
CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 9 0 7 0 6 7 9 6 0 0..06-B 9- IMPELLER BELT -9 TRACTION BELT -0 IDLER ARM BRACKET 0- IDLER PULLEY 9-0 IDLER BRACKET 6 6-9 NUT /6-7 7 7 0- SCREW /6- X.0 GR -97 SHOULDER BOLT /6- X.0 GR 9 7 - NUT /6- LOCK 0 7 00 0-0 SCREW /6- X.6-0 TRACTION IDLER BRACKET ASM 0- SCREW /- X.7 GR 0 9-9 WASHER 9 0-0 WASHER 6 0 0-0 PULLEY ENGINE IMPELLER 6 6 0-0 PULLEY ENGINE TRACTION 7 7 6 0-6 SCREW /6- X.00 GR 0 0 0-00 LOCKWASHER /6 9 0-0 BELT GUIDE 0 - WASHER.0 X. X.0 7 - IDLER BUSHING 7 6 0-0 SCREW /6- X. GR 7 76 06-0 SCREW /-6 X.00 GR NOTE: All component dimensions given in U.S. inches. inch =. mm
WHEELS SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 7- WHEEL ASSEMBLY LH 7- WHEEL ASSEMBLY RH 0.06.0-A NOTE: All component dimensions given in U.S. inches. inch =. mm 9
BAG OF S SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 9 6 7 0-0 BOLT /-0 X. 7 0 0-00 NUT NYLOCK /-0 9- WRENCH 7 9-9 BOLT SHOULDER 9 7-0 NUT HEX FL /-0 CTR 6 7 0 06-00 NUT NYLOCK /-6 7 9-6 WASHER FLAT / SAE 6 96-7 RETAINER HAIRPIN 9 7 06- BOLT /-6 X. 0 7-99 KNOB /-6 TRI LOBE 0-0 BOLT BLACK /6- X / 7 - NUT FL LOCK /6- -0 SPRING DEFLECT CHUTE 0..09-B - - 0 97-0 SHEAR BOLT KIT 0-9 SAFETY IGNITION KIT 0..009-B NOTE: All component dimensions given in U.S. inches. inch =. mm 0
BAG OF S SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 -0 SKID PLATE UHMW 7- BOLT CARRIAGE /6- X.00 - BLK 0-0 NUT LRG FLANGE LOCK /6- - BLK 0..00-C 0..0-C -9 SHIFTER ROD TOP 77- SHIFTER ROD BOTTOM 7 7 0-0 CARRIAGE BOLT /6- X.7-77 NUT /6- NOTE: All component dimensions given in U.S. inches. inch =. mm
DECALS SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 6 7 9-7 DECAL CONSOLE INSTRUCTIONS 0- DECAL AUGER 9 96- DECAL CHUTE 9 96- DECAL AUGER SAFETY 76 7-0 DECAL CONSOLE RH INSTRUCTIONS 6 76 7-0 DECAL CONSOLE LH INSTRUCTIONS 7 0- DECAL BELT GUARD 0.6.00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
DECALS SNOW THROWER - MODEL ST 0P (9690090), PRODUCT 96 9 00-9 9 6 0 9 96- DECAL, DANGER 9 96- DECAL, DANGER, DEFLECTOR 0- DECAL, DANGER 6 9-7 DECAL, INSTRUCTION 9 76 7-0 DECAL, CONS RT 0 76 7-0 DECAL, CONS LT 7-6 DECAL, HANDWARMER 0- DECAL, BELT GUARD - - 6 0-7 OPERATOR S MANUAL, ENGLISH - - 6 0- OPERATOR S MANUAL, FRENCH - - 6 0-6 OPERATOR S MANUAL, SPANISH NOTE: All component dimensions given in U.S. inches. inch =. mm
ENGINE, LCT COMPLETE ENGINE-770 GEN II 9/06/69//0cc Snow Engines 6 6 7 9999 Options 7 6 7 0 * 7 *Included with part # * 7 0 6 6 7 0 69 9 7 9 9 9 6 60 DECALS 7 9 60 6 0 6 Carburetor Repair Kit 70 79 7 7 ILLUSTRATION FOR REFERENCE PURPOSES ONLY 9 9 0 6 77 DESCRIPTION 7 7 6-0 CYLINDER HEAD ASSEMBLY 96-06 PUSH ROD & PLATE KIT (CC) (INCL. VALVE COVER GSKT) 9-0 VALVE COVER (9/CC) (INCL. GASKET) 7 7 99-0 CYLINDER - 69CC SNOW 9- PISTON & ROD ASSEMBLY (CC) 6 7-0 CONNECTING ROD ASSEMBLY (CC) 7 9- CAMSHAFT - MCR (CC) 9-00 FLYWHEEL - ELECTRIC START (-CHARGING MAGNETS) (CC) 9 9-06 COOLING FAN - FLYWHEEL (PLASTIC - CC) DESCRIPTION 0 7 7 90-0 CRANKSHAFT # ED 69CC SNOW 9-0 MUFFLER ASSEMBLY-SNOW 9-09 FUEL TANK ASSEMBLY-69CC SNOW (MATTE BLACK)(ORDER DECAL KIT SEPARATE) 9- FUEL TANK ON/OFF VALVE - GEN II SNOW 6 9- FUEL TANK CAP - BLACK PLASTIC (VENTED) (SAME AS SKSN00.) 7 7 7 9-0 CARBURETOR (LD) 69CC SNOW - W/IDLE-DOWN CONTROL - INCL GASKETS 9- IGNITION COIL (CDI) (9-CC) (STANDARD) NOTE: All component dimensions given in U.S. inches. inch =. mm
ENGINE, LCT COMPLETE ENGINE-770 DESCRIPTION 0 9- SPARK PLUG (SAME AS SK00.) 9- ON/OFF SWITCH - ROCKER (SAME AS SKSN00.) 9- WIRE GUARD PLATE -6 FUEL HOSE KIT (9MM) 9-6 SPEED CONTROL SHIELD-FIXED (69CC ) 9- GOVERNOR GEAR ASSEMBLY 6 9-0 GOVERNOR ARM & LINK KIT (69CC) 7 9- GOVERNOR ARM PADDLE 9-99 RECOIL STARTER-69CC SNOW (GLOSS BLACK)(ORDER DECAL KIT SEPARATE) 9 9-00 STARTER CUP - 69CC SNOW 0 7 7 9-0 BLOWER HOUSING-69CC ES SNOW (GLOSS BLACK)(ORDER DECAL KIT SEPARATE) 0 9-0 CRANKCASE COVER (HOFT & LOW OIL FILLS) 9-6 OIL SEAL KIT (CC) 9-90 ELECTRIC STARTER SWITCH- BOX BRACKET - 9/CC SNOW 69-66 SPARK PLUG BOOT - WITH METAL SHIELD (SNOW) 9-97 0V ELECTRIC STARTER (CC) 6 7 7 9-0 ENGINE GASKET KIT (69CC) 7 - SMALL BLACK OIL DIPSTICK (PLASTIC) 96- ROCKER ARM KIT (9/CC) (INCL. GASKET) 9 9- CHOKE CONTROL KNOB (GEN II RED) 0 9- NON-REMOVABLE PLASTIC PLUG (9/CC) 9-7 CDI BOX BRACKET-SNOW 7 7 96-0 BREATHER TUBE (9/69/CC) 7 9-7 HIGH OIL-FILL TUBE & CAP (NO DIPSTICK) 9- WIRE HARNESS (CC SNOW) 9 7 99-0 OIL DRAIN PLUG W/CAP 0 7-0 HEATER BOX ASSEMBLY- 69/CC SNOW (GLOSS BLACK)(ORDER DECAL KIT SEPARATE) DESCRIPTION 9- CYLINDER SHIELD 9- PRIMER BULB WITH HOSE- SNOW (SAME AS SKSN00.) 9- SAFETY SWITCH W/S (SAME AS SKSN00.) 0-9 SET - RED () (SNOW) 6-7 OIL DRAIN TUBE-SNOW (9/CC) 6 9- CARBURETOR VAPOR SHIELD - CC SNOW 7 7 7-0 CE COMPLLANT MUFFLER SHIELD (9/69CC) 9-9 SHIELD - GOVERNOR LINKAGE 9 7 7 97-0 FUEL TANK SKIRT-69CC SNOW (MATTE BLACK)(ORDER DECAL KIT SEPARATE) 60-96 CHARGING COIL (60-WATT AC) (9/CC) 6 7 7 9-0 FUEL CONTROL KNOB (GEN II SNOW - RED) 6-99 STARTER GRIP-SNOW (DELUXE) 6 96-0 COUNTER WEIGHT KIT 6 7 9-0 TAPPET KIT (9/CC)(SET OF ) 69 6 67-0 CARBURETOR MTG STUD KIT () (CC) 70 0 7-0 CARBURETOR REPAIR KIT (9/CC) 77 6- RECOIL BOLT KIT (INCL. () MTG BOLTS) 7 77-0 BREATHER TUBE RETAINING STRAP 79 7 0-0 SHIELD - CARBURETOR COVER - CC 9 7-0 WOODRUFF FLYWHEEL S (-PACK) (X6XMM) 0 0-0 CARBURETOR SPACER (CC) 6-0 FUEL TANK STRAINER 6 6 7-0 CYLINDER HEAD BOLT KIT () (9-CC) 7 6 70-0 CC COVER BOLT KIT (7) (CC) 6 6-0 MUFFLER MTG STUD KIT () 9 7-0 SPEED CONTROL KNOB, GEN II, SNOW 9999 6 6-0 HIGH ALTITUDE JET (>,000 FEET)(CC L CARBURETOR) NOTE: All component dimensions given in U.S. inches. inch =. mm
07.0. TH