product guide features 2 models YB5515: 15.T (13.6mt) 3section boom with 41 ft. in. (12.5m) outreach YB551: 1.T (16.3mt) 4section boom with 54 ft. 6 in. (16.6m) outreach 15 ft. (4.6m) offsettable swingaway extension 2, lb. (9 72kg) deck carrying capacity 11 bhp (75.3 kw) GM EFI dual fuel engine or 99 bhp (73. kw) Cummins, Tier III, diesel engine contents Features 2 Specifications 3 YB5515 Dimensions 5 Working Range 6 Load Chart Load Chart 9 YB551 Dimensions 1 Range Diagram 11 Load Chart 12 YB5515 (metric) Range Diagram 13 Range Diagram 14 DIN/ISO Load Chart 15 DIN/ISO Load Chart 16 Industrial Hydraulic Crane YB551 (metric) Range Diagram 17 DIN/ISO Load Chart 1 www.manitowoc.com
features 2 Single position oblique style outriggers (YB5515). 2position beam / jack style outriggers (YB551). Standard: Open air cab shell w/overhead safety glass Optional: Closed cab with hinged door, heater, and defroster Standard: Cummins QSB 3.3L, Tier III, diesel rated @ 99 bhp (73.Kw) @ 26 r.p.m. Standard: 41 ft. (12.5m) main boom on the YB5515 54 ft. 6 in. (16.6m) main boom on the YB551 Optional: YB5515: Manual 4th main boom section adds 11 ft. (3.4m) additional main boom length Standard: 2wheel, 4wheel and crab steer (YB5515) Optional: 2wheel, 4wheel, and crab steer with electronic selfalignment (std. on YB551)
specifications Superstructure BBoom YB5515: 1 ft. 6 in. 41 ft. in. (5.6m 12.5m) threesection full power boom. Maximum tip height: 46 ft. 3 in. (14.1m) YB551: 1 ft. 6 in. 54 ft. 6 in. (5.6m 16.6m) foursection full power boom. Maximum tip height: 62 ft. 6 in. (19.m) *Optional Boom YB5515: Manual 4th main boom fly section Maximum tip height: 56 ft. 3 in. (17.m) *Boom Extension 15 ft. (4.6m) offsettable swingaway extension Boom Nose YB5515: 2 sheave nonpivoting boom nose YB551: Two sheave, 3position (, + 4, + ) pivoting boom nose for minimizing head space requirements. Lowers head height 15.9 in. (.4m) when nose is pivoted fully forward. Boom Elevation YB5515: Single double acting hydraulic cylinder with integral holding valve. YB551: Two double acting hydraulic cylinders with integral holding valve. Elevation: to 69 for the YB5515 to for the YB551 AntiTwo Block Device Standard antitwo block device, when activated, provides an audible warning to the crane operator and disengages all crane functions whose movement can cause twoblocking. Load Indicator (wireless LSI) A simple effective and easy to use load indicating system used in conjunction with the antitwo block system to assist the operator in efficient operation of the unit within the limits of the load chart. The display panel displays the hook load and warns the operator when a preset load capacity is exceeded. The warning is by a flashing light on the display panel. In conjunction with the load display panel (receiver), there is a wireless transmitter and load sensing pin attached to the boom head that transmits the hook load to the display panel. *Rated Capacity Limiter (wireless RCL) Similar to the Load Indicator, but stops the telescope out and boom lift down function when a load limit is exceeded. Uses a similar display panel with the addition of displaying boom angle and boom length read outs on the panel. *Load Moment Indicator (hardwired LMI) Digital display of boom angle, boom length, boom radius, capacity, and allows for operator input to set the limits based on load chart. Displays color coded light bar and audible alarm with function cutout if load exceeds entered parameters. Swing Ball bearing swing circle with 36 continuous rotation. Hydraulic driven worm gear and pinion. Maximum speed: YB5515: 2.1 rpm YB551: 2.5 rpm Hydraulic System 4 section gear pump providing a system pressure of 35 psi (241.3 bars) Combined flow:. gpm (333.1 Lpm) YB5515: Six section valve bank mounted in dash with direct mechanical linkage for low effort lever control. YB551: Six section valve bank chassis mounted; operated via dash mounted, pilot pressure hydraulic joysticks. Return line filter with full flow bypass protection and service indicator. 4 gallon (151.4 L) hydraulic reservoir with sight level gauge and steel side plating to guard against side impact damage. Hoist Specifications Piston motor drive with spring applied / hyd. released brake. Equal speed power up and down. Drum Diameter: 9.75 in. (.25m) Maximum hoist single line pull: 12, lb. (5 443kg) Maximum hoist single line speed: YB5515: 126 FPM (3.4m / min) YB551: 15 FPM (4.2m / min) Maximum Permissible Single Line Pull: YB5515: 7,5 lb (3 42kg) (1/`2" [12.7mm] EEIPS) YB551: 9, lb (4 2kg) (1/2" [12.7mm] Python Ultra) Rope Length: YB5515: (3section boom) (4section boom) YB551: *Denotes optional equipment 24 ft. (73.m) 29 ft. (.4m) 31 ft. (94.5m) 3
specifications 4 Carrier F Frame High strength alloy steel constructed with integral outrigger housings; front and rear tiedown lugs. 75 ft. 2 carrydeck size with 2, lb (9 72kg) carrying capacity. Deck coated with antiskid treatment. Electrical System One 12V maintenance free battery, 2CCA @. 63 amp alternator. D Drive 4 x 2 Front axle drive with planetary hubs and limited slip differential. O Outriggers YB5515: Front and rear oblique type beams at all four corners with integral holding valves. Outrigger pads form an integral part of the beam. Outrigger pad size.75" x 1" (222 mm x 254 mm). YB551: 2stage hydraulic telescoping beam with oblique type jack on all four corners, provides extended and down and retracted and down lifting capacities. Integral holding valves on both beam and jack. Outrigger pad size.75" x 1" (222 mm x 254 mm). Outrigger Controls YB5515: Lever controls located on dash panel and operate the beams in pairs from side to side. Level bubble located inside operators compartment. YB551: Two switch operation mounted on dash panel. One 3 position rocker switch to select all beams / jacks, left beams / jacks only, or right beams / jacks only. Separate 4 way toggle switch to activate beams out / in and jacks down / up. Level bubble indicator located inside operators compartment. *Independent outrigger controls available as an option. Std. Engine Cummins QSB 3.3L turbocharged diesel rated @ 99 bhp (73.kW) @ 26 rpm. *Optional Engine G.M. L V6 EFI dual fuel (gasoline / L.P.) rated @ 11 bhp (75.3kW) @ 25 rpm. Operators Control Station Frame mounted, open air style control station with cab shell includes all crane functions, driving controls, and overhead safety glass. Other standard equipment include a durable weather resistant seat with seat belt, hourmeter, sight level bubble, and fire extinguisher. The dash panel includes engine oil pressure gauge, engine water temperature gauge, fuel gauge, transmission low oil and high temperature warning lights, low battery warning light, and brake system low pressure warning light. The LSI (load indicator) receiver is mounted to the top of the dash. *Operators Control Station Enclosed Includes the standard cab shell with the addition of front, right, and rear glass. Hinged full door with sliding glass. Front windshield wiper, heater and defroster are included. Fuel Tank Capacity 4 gallon (151.4 L) all steel construction with steel side plate to guard against side impact. Steer YB5515: 2wheel, 4wheel, and crab steer YB551: 2wheel, 4wheel, and crab steer w/electric self alignment. Transmission YB5515: I.T.L. synchromesh 4speeds forward and reverse. YB551: I.T.L. powershift 4speeds forward and reverse. Stalk mounted shifter on left side of steering column. Tires 35/65R 22.5 radial traction tread pneumatic. Brakes Hydraulic actuated internal wetdisc service brakes acting on all four wheels. A dash mounted toggle switch activates the dry disc parking brake on the transmission output yoke with a dash warning light. Suspension Front: Rigid mounted to frame. Rear: Provides 1.5 oscillation for use on semirough terrain. Axle lockout must be engaged (locked) whenever picking on rubber or traveling in the crab steer mode. A warning light indicates when the axle lockouts are engaged. *Optional 4 oscillation. L Lights Recessed mounted, includes head, tail, rear work, stop, and turn signals. Maximum Speed YB5515: 14.5 mph (23.3km/h) YB551: 21. mph (33.km/h) Gradeability** YB5515: 73%...no load 41%...2,lb (9 72kg) load YB551: 6%...no load 4%...2,lb (9 72kg) load G.V.W. YB5515: YB551: 26,3 lb (11 93kg) 3section boom 26,75 lb (12 134kg) 4section boom 3, lb (13 6kg) Miscellaneous Standard Equipment Two sheave, Quick Reeve style hookblock; YB5515: 15.T (13.6mt); YB551: 1.T (16.3mt). Backup alarm Lifting and tie down lugs *Denotes Optional Equipment **Theoretical
dimensions YB5515 4' 4" (1.32 m) " (2.3 mm) " (2.3 mm) 15'.5" (4.5 m) 3 Section Boom 1' 6'' Retracted (5.65 m) 41' " Extended 15' (12.5.5" m) (4.5 m) 3 Section Boom 1' 6'' Retracted 4 Section Boom(5.65 m) 1' 6'' Retracted 41' " Extended (5.65 m) (12.5 m) 52' 3" Extended (15.93 m) 7' 1" (2.16 m) 6' " (1.3 m) 3' 6" (1.6 m) 7' 1" (2.16 m) 6' " (1.3 m) 3' 6" (1.6 m) 2' 5" (.74 m) 5 4' 4" (1.32 m) 4 Section Boom 1' 6'' Retracted (5.65 m) 1' " 52' 3" Extended (5. cm) (15.93 m) 1' " (5. cm) 22' 1'' (6.73 m) 22' 1'' (6.73 m) 7' 111/2" (2.43 m) 13' 21/2'' (4.6 m) 7' 111/2" (2.43 m) 13' 21/2'' (4.6 m) 4' " (1.22 m) 4' " 14' (1.22 1' m) (4.29 m) 14' 1' (4.29 m) 6' 7" (2.1 m) 6' 7" (2.1 m) 7' 111/2" (2.43 m) 2' 5" (.74 m) 7' 111/2" (2.43 m) 6' 2" (1. m) 1' 3" (3.1 cm) 1' 1" (33. cm) 6' 61/2" (1.99 m) ' " (w/ Enclosed Cab) (2.44 m) 12' 3" (3.73 m) YB5515 Dimensions 3" (. m) 4' 1" (1.24 m)
6 range diagram 3SECTION BOOM YB5515 BOOM AND EXTENSION LENGTH IN FEET HEIGHT FROM THE GROUND IN FEET OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
range diagram YB5515 BOOM AND EXTENSION LENGTH IN FEET 72 7 6 66 64 62 6 5 56 54 52 5 4 46 44 42 4 3 36 34 32 3 2 26 24 22 2 1 16 14 12 1 6 4 2 6 4 2 2 4 6 1 12 14 16 1 2 22 24 26 2 3 32 34 36 3 4 42 44 46 4 5 52 54 56 5 6 62 64 66 72 69 o 7 6 4 2 2 4 6 4SECTION BOOM 6 o RETRACTED RETRACTED EXTENDED EXTENDED 15' 2 W/4TH RET W/4TH EXT W/4TH RET W/4TH EXT JIB 1 12 14 16 1 2 22 24 26 2 3 32 34 36 3 4 42 44 46 4 5 52 54 56 5 6 62 64 66 5 o 4 o 3 o 2 o 1 o o 6 66 64 62 6 5 56 54 52 5 4 46 44 42 4 3 36 34 32 3 2 26 24 22 2 1 16 14 12 1 6 4 HEIGHT FROM THE GROUND IN FEET 7 OPERATING RADIUS IN FEET FROM AXIS OF ROTATION
load chart MAIN BOOM JIB RADIUS (ft) 6.. 1. 12. 14. 15. 16. 1. 2. 22. 24. 26. 2. 3. 32. 34. 36. 37.5 4. 42. 44. 46. 4. 52.5 ON OUTRIGGERS (lbs) ON RUBBER (lbs) F/R 36 F/R 36 3 3 17 17 262 262 135 146 223 223 17 1 16 16 71 1 14 14 721 6 13 13 66 525 122 122 66 476 1 1 512 39 963 91 437 319 64 74 371 266 779 621 37 22 74 531 262 12 642 474 226 153 57 429 199 132 56 392 179 116 451 35 161 14 42 326 146 93 37 36 137 6 34 26 127 331 27 119 74 313 256 112 69 296 241 14 64 271 221 93 57 239 194 79 4 YB5515 w/3section boom MAIN BOOM ANGLE (deg) JIB STRUCTURAL CAPACITIES (lbs) 15 3 69 6 39 65 5 35 6 55 43 3 315 25 5 34 26 45 35 24 4 35 3 2 26 24 225 215 2 25 23 25 2 22 2 15 1 21 25 195 5 22 2 2 255 235 22 21 2 195 19 15 JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 15 3 FRONT MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED 1PART 75 lbs REDUCTION CHART FROM MAIN BOOM RATINGS 21 lbs 1 lbs lbs 7 lbs RIGGING CHART 4PART 3 lbs WIRE ROPE: 1/2 inch diameter Min. breaking strength 2625 lbs. REAR FROM JIB RATINGS N/A 1 lbs N/A lbs 15 3 1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 5% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous suroundings, climatic conditions, experience of operator and proper training must be taken into account by the operator. 3) The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (12 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with the boom retracted to the shortest length possible and centered over the front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 16 lbs. The maximum deck load only is 2 lbs. ) Do not induce any external side loads to boom or jib.
YB5515 w/ 4section boom RADIUS (ft) ON OUTRIGGERS (lbs) 4TH RETRACTED ON RUBBER (lbs) F/R 36 o F/R 36 o 6. 3 3 17 17. 262 262 135 146 1. 223 223 17 11 12. 16 16 71 765 14. 14 14 721 54 15. 13 13 66 49 16. 122 122 66 45 1. 1 16 495 375 2. 963 63 39 3 22. 64 735 323 246 24. 779 646 272 199 26. 6 57 236 161 2. 52 54 21 141 3. 52 442 1 122 32. 44 395 165 17 34. 393 357 146 92 36. 351 319 12 77 37.5 321 29 11 6 4. 295 26 17 61 42. 276 243 97 55 44. 259 225 9 5 46. 243 29 45 4. 224 15 6 3 52.5 23 14 5 29 5. 63. MAIN BOOM JIB RADIUS (ft) 6.. 1. 12. 14. 15. 16. 1. 2. 22. 24. 26. 2. 3. 32. 34. 36. 37.5 4. 42. 44. 46. 4. 52.5 5. 63. ON OUTRIGGERS (lbs) 4TH EXTENDED ON RUBBER (lbs) F/R 36 o F/R 36 o 11 11 11 11 17 17 17 17 925 925 925 925 29 39 776 75 2 2 715 6 11 11 661 551 795 795 56 45 72 72 473 356 771 771 39 3 763 727 341 252 71 633 294 215 659 542 255 14 571 476 219 15 51 4 1 136 46 357 16 116 425 319 137 99 33 297 124 34 27 17 74 315 249 96 63 29 23 7 54 263 213 79 47 232 193 71 37 27 171 59 2 172 13 42 17 133 12 23 6 MAIN BOOM ANGLE (deg) load chart JIB STRUCTURAL CAPACITIES (lbs) 4TH RETRACTED 4TH EXTENDED o 15 o 3 o o 15 o 3 o 69 6 39 65 5 35 6 55 43 3 315 25 5 34 26 45 35 24 4 35 3 2 26 24 225 215 2 25 23 25 2 22 2 15 1 21 25 195 5 22 2 2 255 235 22 21 2 195 19 15 51 497 43 3 34 35 2 26 24 23 22 21 25 22 2 39 35 315 25 26 24 225 215 2 25 2 195 2 255 235 22 21 2 195 19 15 9 JIB CAP ACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 15 o 3 o FRONT MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED 1PART 75 lbs REDUCTION CHART FROM MAIN BOOM RATINGS 21 lbs 1 lbs lbs 7 lbs RIGGING CHART WIRE ROPE: 1/2 inch diameter Min. breaking strength 2625 lbs. REAR FROM JIB RATINGS N/A 1 lbs N/A lbs 4PART 3 lbs 15 o 3 o 1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 5% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous suroundings, climatic conditions, experience of operator and proper training must be taken into account by the operator. 3) The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (12 psi). Loads on rubber may be transported at a maximum speed of 2.5 mph on a smooth, hard, level surface with the boom retracted to the shortest length possible and centered over the front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 16 lbs. The maximum deck load only is 2 lbs. ) Do not induce any external side loads to boom or jib.
1 1' " (.51 m) dimensions 1' 4.5" (.42 m) 3' 11" (1.19 m) 13.25" (.34 m) 7' 11.25" 6' " (2.42 m) 6' 6.75" (2.3 m) (2. m) 7' 1.25" YB551 Dimensions (2.17 m) 14' 1.25" 7' " (7' m) " (2.13 m) 22' " 15' " (2.13 m) 6' " (6.91 m) 15' " (4.7 m) 6' " (1.3 m) (4.7 m) (1.3 m) 3' 6" 3' 6" 1.7 m) 3' 1.75 " 1.7 m) (1.17 m) Retracted 1' 6" (5.64 m) & Extended 54' 6" (16.61 m) Retracted 1' 6" (5.64 m) & Extended 54' 6" (16.61 m) YB551 65.97" (1.6 m) 63.39" (1.61 m) 5." (1.27 m) o SEE INSET 4 o o Dimensions are with the boom horizontal and the antitwo block bottomed. SEE 7' 11" INSET (2.41 m) 1' " (.51 m) 6' 2.25" (1.9 m) 1' " (.51 m) 1' 4.5" (.42 m) 3' 11" 7' 11.25" 14.25" 7' 11.25" (1.19 m) (2.42 (.36 m) m) (2.42 m) 6' " 6' " (2.3 6' 6' m) 6.75" 6" (2.3 m) (1.9 (2. m) 7' m) 1.25" 7' 1.25" (2.17 7' m) 9.5" (2.17 m) 14' 1.25" (2.3 m) 13' 1" ( m) 22' " 22' " (4.22 m ) (6.91 m) (6.91 m) 2' " (.75 m) 1' 4.5" (.42 m) 3' 11" (1.19 m) 13.25" 6' (.34 6.75" m) (2. m) 14' 1.25" ( m) 3' 1" (1.17 m) 4'.75" (1.24 m) 13.25" (.34 m) 3' 1.75 " (1.17 m) 65.97" (1.6 m) o 7' 11" (2.41 m) 2' " (.75 m) 63.39" (1.61 m) 5." (1.27 m) 4 o o Dimensions are with the boom horizontal and the antitwo block bottomed. 6' 2.25" (1.9 m) 13' 1" (4.22 m ) 6' 6" (1.9 m) 14.25" (.36 m) 7' 9.5" (2.3 m) 3' 1" (1.17 m) 4'.75" (1.24 m)
BOOM AND EXTENSION LENGTH IN FEET YB551 7 76 74 72 7 6 66 64 62 6 5 56 54 52 5 4 46 44 42 4 3 36 34 32 3 2 26 24 22 2 1 16 14 12 1 6 4 2 6 4 2 2 4 6 1 12 14 16 1 2 22 24 26 2 3 32 34 36 3 4 42 44 46 4 5 52 54 56 5 6 62 64 66 6 7 76 74 72 7 6 66 64 62 6 5 56 54 52 5 4 46 44 42 4 o 75 o 3 7 o 65 o 36 6 o 55 o 34 5 o 32 45 o 3 4 o 2 35 o 26 3 o 24 22 25 o 2 2 o 1 15 o 16 14 1 o 12 5 o 1 o 6 4 2 1.5 FT BOOM 3.5 FT BOO M 4 2.5 FT BOO M 54.5 FT BOO M 69.5 FT WITH 15 FT JIB 6 4 2 2 4 6 1 12 14 16 1 2 22 24 26 2 3 32 34 36 3 4 42 44 46 4 5 52 54 56 5 6 62 64 66 6 OPERATING RADIUS IN FEET FROM AXIS OF ROTATION range diagram HEIGHT FROM THE GROUND IN FEET 11
load chart YB551 12 MAIN BOOM LOAD RATINGS ON OUTRIGGERS Extended and Down 36 o or Retracted and Down Front/Rear 1.5 ft BOOM 3.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM Boom Rated Boom Rated Boom Rated Boom Rated Radius Angle Load Angle Load Angle Load Angle Load (ft) (deg) (lbs) (deg) (lbs) (deg) (lbs) (deg) (lbs) 1 6 12 14 15. 16 1 2 22 24 26 27. 2 3 32 34 36 3 39. 4 42 44 46 4 51. 64 36 75 245 79 237 57 315 71 245 77 23 174 49 24 67 24 74 215 77 15 39 195 63 2 71 197 75 14 25 162 5 16 6 17 73 126 15 56 155 66 15 72 12 53 144 65 146 71 114 4 125 62 127 69 15 43 11 59 112 66 96 37 9 55 1 64 9 29 7 52 9 61 3 1 7 4 1 59 77 74 46 77 5 75 44 73 56 72 4 65 54 67 36 57 51 6 3 51 4 54 24 45 45 4 15 4 42 43 39 41 4 39 3 35 34 31 31 27 29 21 27 24 MAIN BOOM ON RUBBER Any Boom Length Radius Front Rating 36 o Rating (ft) 6 (lbs) 16 13 (lbs) 19 7 1 12 11 91 74 64 14 15. 7 71 56 53 16 1 2 22 24 65 56 4 42 36 49 42 35 3 25 26 27. 315 295 22 25 2 3 32 34 36 2 245 21 19 175 19 165 14 12 1 3 1525 5 39. 145 775 4 135 725 42 115 625 44 15 525 46 95 425 4 5 3 51. 7 2 RATING REDUCTIONS FOR LOAD HANDLING DEVICES INSTALLED (lbs) FROM MAIN BOOM FROM JIB MAIN BLOCK HOOK & BALL JIB ST OWED JIB DEPLOYED 15 o 3 o FRONT 23 1 NO REDUCTION 7 NOT APPLICABLE 1 NOT APPLICABLE NO REDUCTION REAR 15 o 3 o MAIN BOOM LOAD RATINGS ON OUTRIGGERS Retracted and Down 36 o 1.5 ft BOOM 3.5 ft BOOM 42.5 ft BOOM 54.5 ft BOOM Boom Rated Boom Rated Boom Rated Boom Rated Radius Angle Load Angle Load Angle Load Angle Load (ft) (deg) (lbs) (deg) (lbs) (deg) (lbs) (deg) (lbs) 6 1 12 14 15. 16 1 2 22 24 26 27. 2 3 32 34 36 3 39. 4 42 44 46 4 51. 64 57 49 39 25 36 29 16 114 9 75 245 79 71 245 77 67 22 74 63 129 71 5 99 6 56 9 66 53 1 65 4 6 62 43 59 59 37 5 55 29 41 52 1 36 34 4 46 44 4 36 3 24 15 237 23 2 12 12 93 5 72 62 52 45 3 36 33 29 25 22 2 1 17 77 75 73 72 71 69 66 64 61 59 5 56 54 51 4 45 42 41 39 35 31 27 21 174 15 13 16 95 5 72 61 53 45 39 36 33 2 25 22 2 1 17 16 14 13 11 9 7 15 FT JIB CAPACITIES ON EXTENDED OUTRIGGERS Jib Offset Angle Main Boom deg 15 deg 3 deg Angle To 42.5 ft To 54.5 ft To 42.5 ft To 54.5 ft Any (deg) Main Main Main Main Boom Boom Boom Boom Boom Length 5 5 35 75 7 65 75 61 5 46 44 39 35 44 39 35 31 2 255 6 43 3 315 315 235 55 3 33 25 25 22 5 45 4 34 35 2 29 26 24 26 24 225 26 24 225 21 2 195 35 3 25 26 24 23 215 193 175 215 2 25 25 15 172 19 13 2 15 22 21 16 15 2 195 159 152 1 5 25 146 22 2 145 144 SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 1) The rated loads are the maximum lift capacitie s as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before load ing, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed 5% of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working l oads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper handling must all be taken into account by the operator. 3) The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See above. 4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 5) Ratings on rubber depend on tire capacity, co ndition of tires and proper inflation pressure (12 psi). Loads on rubber may be transported at a maximum speed of 2.5 mp h on a smooth hard level surface with boom retacted to the shortest length possible and centered over front. Do not use jib with crane on rubber. For operating radius not shown, use load rating of next larger radius. The maximum combined total boom and deck load is 16, lbs. The maximum deck load only is 2, lbs. Do not induce any external side loads to boom or jib. MAXIMUM PERMISSIBLE SINGLE LINE PULL = 9 lbs WIRE ROPE: 1/2 inch dia. 1 x 19 EIPS IWRC BRIGHT Min. req'd breaking strength = 31,5 lbs 6) 7) )
range diagram YB5515 (w/3section boom) 1.9 1.3 1. 1.2.6.6 1.2 1. 2.4 3. 3.7 69 o 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.6 12.2 12. 13.4 14. 14.6 15.2 15. 16.5 1.9 1.3 13 17.7 17.1 6 o 17.7 17.1 16.5 16.5 15. 15.2 14.6 14. 5 o 15. 15.2 14.6 14. 13.4 4 o 13.4 BOOM AND EXTENSION LENGTH IN METERS 12. 12.2 11.6 11. 1.4 9. 9.1.5 7.9 7.3 6.7 3 o 2 o 12. 12.2 11.6 11. 1.4 9. 9.1.5 7.9 7.3 6.7 1 o 3.7 3.7 3. 3. 2.4 1. 1.2.6 o 2.4 1. 1.2.6 1. 1.2.6.6 1.2 1. 2.4 3. 3.7 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.6 OPERATING RADIUS IN METERS FROM AXIS OF ROTATION 12.2 12. 13.4 14. 14.6 15.2 15. 16.5
range diagram 14 BOOM AND EXTENSION LENGTH IN METERS 21.9 21.3 2.7 2.1 19.5 1.9 1.3 17.7 17.1 16.5 15. 15.2 14.6 14. 13.4 12. 12.2 11.6 11. 1.4 9. 9.1.5 7.9 7.3 6.7 3.7 3. 2.4 1. 1.2.6 YB5515 (w/4section boom) 1. 1.2.6.6 1.2 1. 2.4 3. 3.7 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.6 12.2 12. 13.4 14. 14.6 15.2 15. 16.5 17.1 17.7 1.3 1.9 19.5 2.1 21.9 69 o 21.3 2.7 6 o 5 o 4 o 3 o 2 o 1 o o 1. 1.2 RETRACTED RETRACTED EXTENDED EXTENDED 4.6 m.6 1. 1.2.6.6 1.2 1. 2.4 3. 3.7 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.6 12.2 12. 13.4 14. 14.6 15.2 15. 16.5 17.1 17.7 1.3 1.9 19.5 2.1 2.1 19.5 1.9 1.3 17.7 17.1 16.5 15. 15.2 14.6 14. 13.4 12. 12.2 11.6 11. 1.4 9. 9.1.5 7.9 7.3 6.7 3.7 3. 2.4 OPERATING RADIUS IN METERS FROM AXIS OF ROTATION
before DIN/ISO load chart YB5515 (w/3section boom) MAIN BOOM JIB RADIUS (m) 1. 2.4 3. 3.7 4.6 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.4 12.2 12. 13.4 14. 1 16. ON OUTRIGGERS (kg) ON RUBBER (kg) MAIN JIB STRUCTURAL F/R 36 o F/R 36 o BOOM ANGLE CAPACITIES (kg) 1361 1361 771 771 (deg) o 15 o 3 o 11 11 612 662 112 112 45 46 69 272 177 127 44 44 395 36 65 227 159 116 671 671 327 265 6 195 143 17 59 59 299 231 55 172 129 1 554 553 275 29 5 154 11 95 49 475 232 17 45 13 19 91 437 34 194 137 4 127 12 392 312 161 113 35 11 9 6 346 257 132 92 3 19 94 4 31 219 111 75 25 14 93 266 195 95 62 2 1 91 235 175 3 53 15 95 2 16 74 45 1 93 15 145 66 4 5 92 164 131 59 35 91 15 123 55 32 141 114 5 29 133 1 47 26 126 11 43 24 119 95 4 22 1 7 35 19 94 75 2 14 JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 15 3 o 15 o FRONT MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED 1PART 34 kg REDUCTION CHART FROM MAIN BOOM RATINGS 1 kg 5 kg kg 32 kg RIGGING CHART WIRE ROPE: 13 mm diameter Min. breaking strength 12.4 kn. REAR FROM JIB RATINGS N/A 5 kg N/A kg 4PART 1361 kg 15 o 3 o 1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed % of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous suroundings, climatic conditions, experience of operator and proper training must be taken into account by the operator. 3) The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (.3 bar). Loads on rubber may be transported at a maximum speed of 1.4 km/h on a smooth, hard, level surface with the boom retracted to the shortest length possible and centered over the front. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 7 26 kgs. The maximum deck load only is 9 7 kgs. ) Do not induce any external side loads to boom or jib.
DIN/ISO load chart YB5515 (w/4section boom) 16 RADIUS (m) ON OUTRIGGERS (kg) 4TH RETRACTED ON RUBBER (kg) F/R 36 o F/R 36 o RADIUS (m) ON OUTRIGGERS (kg) 4TH EXTENDED ON RUBBER (kg) F/R 36 o F/R 36 o MAIN BOOM ANGLE (deg) JIB STRUCTURAL CAPACITIES (kg) 4TH RETRACTED 4TH EXTENDED o 15 o 3 o o 15 o 3 o 1. 2.4 3. 3.7 4.6 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.4 12.2 12. 13.4 14. 1 16. 17.7 1361 11 112 44 671 59 554 49 437 392 332 22 24 25 179 159 141 129 117 19 12 1361 11 112 44 671 59 554 445 36 35 267 234 26 1 16 144 127 115 12 95 95 1 7 7 7 55 771 612 46 395 327 299 267 216 172 13 115 99 7 77 67 5 5 45 4 36 32 2 23 15 771 612 49 339 24 214 196 162 131 13 2 65 56 47 4 34 27 23 19 17 15 12 9 5 19.4 MAIN BOOM JIB 1. 2.4 3. 3.7 4.6 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.4 12.2 12. 13.4 14. 1 16. 17.7 19.4 53 45 42 53 45 42 376 376 372 372 36 36 361 361 355 355 35 35 346 32 31 262 273 223 235 195 212 166 191 144 169 127 155 11 136 17 126 97 115 9 14 2 9 74 64 65 5 53 45 42 352 324 3 253 26 172 147 125 1 91 77 64 54 4 4 35 31 2 24 19 11 53 45 42 332 267 242 196 153 12 16 9 75 63 53 45 37 32 25 2 16 13 9 5 4 35 2 69 65 6 55 5 45 4 35 3 25 2 15 1 5 272 227 195 172 154 13 127 11 19 14 1 95 93 92 91 177 159 143 129 11 19 12 9 94 93 91 127 116 17 1 95 91 6 4 235 225 195 172 154 13 127 11 19 14 1 95 93 92 91 177 159 143 129 11 19 12 9 94 93 91 127 116 17 1 95 91 6 4 JIB CAPACITY IS LIMITED BY BOTH STRUCTURAL CAPACITY CHART AND MAIN CAPACITY CHART. SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 3 o 15 o FRONT REAR 15 o 3 o 1) The rated loads are the maximum lifting capacities as determined by operating radius only. Any combination of boom lengths and angles may be used to obtain operating radius. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 4) Ratings on outriggers are with outriggers fully extended. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (.3 bar). Loads on rubber may be transported at a maximum speed of 1.4 km/h on a smooth, hard, level surface with the boom retracted to the shortest length possible and centered over the front. MAIN BLOCK HOOK & BALL JIB, STOWED JIB, DEPLOYED 1PART 34 kg REDUCTION CHART FROM MAIN BOOM RATINGS 1 kg 5 kg kg 32 kg RIGGING CHART WIRE ROPE: 13 mm diameter Min. breaking strength 12.4 kn. FROM JIB RATINGS N/A 5 kg N/A kg 4PART 1361 kg 2) The rated loads shown on outriggers do not exceed % of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous suroundings, climatic conditions, experience of operator and proper training must be taken into account by the operator. 3) The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See reduction chart. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 7 26 kgs. The maximum deck load only is 9 7 kgs. ) Do not induce any external side loads to boom or jib.
range diagram YB551 24 23 2 1 1 2 3 4 5 6 7 9 1 11 12 13 14 15 16 17 1 19 2 21 24 23 17 22 21 2 19 21. 2 m W I T H 4. 6 m J I B 22 21 2 19 BOOM AND EXTENSION LENGTH IN METERS 1 17 16 15 14 13 12 11 1 9 7 6 5 4 5. 6 m BO O M 9. 3 m BO O M 13. m BO O M 16. 6 m BO O M o 75 o 7 o 65 o 6 o 55 o 5 o 45 o 4 o 35 o 3 o 25 o 2 o 15 o 1 o 1 17 16 15 14 13 12 11 1 9 7 6 5 4 3 5 o 3 2 o 2 1 1 2 1 1 2 3 4 5 6 7 9 1 OPERATING RADIUS IN METERS FROM AXIS OF ROTATION 11 12 13 14 15 16 17 1 19 2 21
DIN/ISO load chart YB551 1 Radius (m) 1. 2.4 3. 3.7 4.6 6.7 7.3 7.9.2.5 9.1 9. 1.4 11. 11.6 11.9 12.2 12. 13.4 14. 14.6 1 MAIN BOOM LOAD RATINGS ON OUTRIGGERS Extended and Down 36 o or Retracted and Down Front/Rear 5.6 m BOOM Boom Rated Angle Load (deg) (kgs) 9.3 m BOOM Boom Angle (deg) Rated Load (kgs) 13. m BOOM Boom Angle (deg) Rated Load (kgs) 16.6 m BOOM Boom Angle (deg) Rated Load (kgs) 64 1633 75 156 79 23 57 1429 71 143 76 56 4 19 67 1 74 711 77 5 3 5 63 71 62 75 553 25 712 5 726 6 561 73 492 639 56 664 66 533 72 466 53 61 65 57 71 442 4 522 62 462 6 42 43 453 59 424 66 367 36 39 55 392 64 33 29 353 52 357 61 313 1 316 4 326 59 291 34 46 31 5 22 44 296 56 275 4 2625 54 25 36 2335 51 239 3 25 4 217 24 11 45 193 15 163 42 1725 155 4 163 39 154 35 139 31 127 26 115 21 145 93 Radius (m) 1. 2.4 3. 3.7 6.7 7.3 7.9.5 9.1 9. 1.4 11. 11.6 12.2 12. 13.4 14. 14.6 1 MAIN BOOM ON RUBBER Any Boom Length Front Rating (kgs) 36 o Rating (kgs) 726 495 56 395 45 336 362 2 34 239 257 2 219 169 19 143 164 121 142 13 122 7 19 74 95 63 4 525 72 43 61 34 52 27 47 215 4 165 34 12 2 23 45 15 Note: For 36 rating on rubber, rear axle locks must be in place. RATING REDUCTIONS FOR LOAD HANDLING DEVICES INSTALLED (kgs) FROM MAIN BOOM FROM JIB MAIN BLOCK HOOK & BALL JIB STOWED JIB DEPLOYED 95 43 NO REDUCTION 31 NOT APPLICABLE 43 NOT APPLICABLE NO REDUCTION 15 3 FRONT REAR SHADED AREAS ARE GOVERNED BY STRUCTURAL STRENGTH, DO NOT RELY ON TIPPING. OPERATION OF THIS EQUIPMENT IN EXCESS OF RATING CHARTS AND DISREGARD OF INSTRUCTIONS IS DANGEROUS AND VOIDS WARRANTY. 15 3 MAIN BOOM LOAD RATINGS ON OUTRIGGERS Retracted and Down 36 o 5.6 m BOOM 9.3 m BOOM 13. m BOOM 16.6 m BOOM Boom Rated Boom Rated Boom Radius (m) Angle (deg) Load (kgs) Angle (deg) Load (kgs) Angle (deg) 1. 64 1633 75 156 79 2.4 57 976 71 45 76 3. 4 69 67 625 74 3.7 3 55 63 46 71 25 37 5 391 6 4.6 326 56 353 66 53 321 65 4 27 62 43 224 59 6.7 36 19 55 7.3 29 161 52 7.9 1 139 4.2 131 46.5 44 9.1 4 9. 36 1.4 3 11. 24 11.6 15 11.9 12.2 12. 13.4 14. 14.6 1 Rated Load (kgs) 23 75 563 44 366 332 37 259 22 19 163 142 132 122 15 93 3 73 64 61 Boom Angle (deg) 77 75 73 72 71 6 66 64 61 59 5 56 54 51 4 45 42 4 39 35 31 26 21 Rated Load (kgs) 55 513 41 342 314 27 244 21 11 15 13 129 121 16 92 1 72 65 6 56 47 39 32 25 17 4.6 m JIB CAPACITIES ON EXTENDED OUTRIGGERS (kgs) Jib Offset Angle Main Boom deg 15 deg 3 deg Angle To 13. m To 16.6 m To 13. m To 16.6 m Any (deg) Main Main Main Main Boom Boom Boom Boom Boom Length 227 227 159 75 7 65 345 277 227 29 2 177 159 2 177 159 141 127 116 6 195 173 143 142 17 55 173 146 129 126 1 5 45 4 154 13 127 1225 12 7 11 19 12 11 94 93 5 7 35 3 25 2 15 1 11 19 11 93 7 4 76 6 61 565 55 535 9 94 93 91 9 7 625 57 535 52 7 63 5 3 25 53 53 1) The rated loads are the maximum lift capacities as determined by operating radius, boom length and boom angle. The operating radius is the horizontal distance from a projection of the axis of rotation to the supporting surface, before loading, to the center of vertical hoist line or tackle with load applied. 2) The rated loads shown on outriggers do not exceed % of actual tipping. The rated loads shown on rubber do not exceed 75% of actual tipping. These ratings are based on freely suspended loads with the crane leveled, standing on a firm, uniform supporting surface. Practical working loads depend on supporting surface, operating radius and other factors affecting stability. Hazardous surroundings, climatic conditions, experience of personnel and proper handling must all be taken into account by the operator. 3) The weights of all load handling devices, such as hooks, hook blocks, slings, etc., except the hoist rope, shall be considered as part of the load. See above. 4) Ratings on outriggers are for either outriggers fully extended and down or fully retracted and down. Ratings for outriggers fully retracted and down will apply for any intermediate outrigger setting. 5) Ratings on rubber depend on tire capacity, condition of tires and proper inflation pressure (.3 bar). Loads on rubber may be transported at a maximum speed of 1.4 km/h on a smooth hard level surface with boom retacted to the shortest length possible and centered over front. Do not use jib with crane on rubber. 6) For operating radius not shown, use load rating of next larger radius. 7) The maximum combined total boom and deck load is 7 264 kgs. The maximum deck load only is 9 kgs. ) Do not induce any external side loads to boom or jib. MAXIMUM PERMISSIBLE SINGLE LINE PULL = 4 kgs WIRE ROPE: 13 mm dia. 1 x 19 EIPS IWRC BRIGHT Min. req'd breaking strength = 15 71 kgs
notes 19
Regional Headquarters Americas Manitowoc, Wisconsin, USA Tel: +1 92 64 6621 Fax: +1 92 63 627 Shady Grove, Pennsylvania, USA Tel: +1 717 597 121 Fax: +1 717 597 462 Europe, Middle East, Africa Ecully, France Tel: +33 472 1 22 Fax: +33 472 1 2 Asia Pacific Shanghai, China Tel: +6 21 51113579 Fax: +6 21 5111357 Singapore Tel: +65 6264 11 Fax: +65 662 4142 Regional Offices Americas Brazil Alphaville Tel: +55 11 313 2 Fax: +55 11 46 213 Mexico Monterrey Tel: +52 1 124 12 Fax: +52 1 124 129 Europe, Middle East, Africa Algeria Hydra Tel: +21 3 21 4 1173 Fax: +21 3 21 4 1454 Czech Republic Netvorice Tel: +42 317 7 9313 Fax: +42 317 7 9314 France Baudemont Tel: +33 35 2 259 Fax: +33 35 2 43 Cergy Tel: +33 13 31 315 Fax: +33 13 3 65 Decines Tel: +33 472 1 5 Fax: +33 472 1 51 Germany Langenfeld Tel: +49 21 73 99 Fax: +49 21 73 99 3 Hungary Budapest Tel: +36 13 39 622 Fax: +36 13 39 622 Italy Parabiago Tel: +39 331 49 3311 Fax: +39 331 49 333 Netherlands Breda Tel: +31 76 57 3999 Fax: +31 76 57 397 Poland Warsaw Tel: +4 22 43 324 Fax: +4 22 43 3471 Portugal Alfena Tel: +351 229 69 4 Fax: +351 229 69 4 Lisbon Tel: +351 212 19 34 Fax: +351 212 19 349 Russia Moscow Tel: +7 495 641 2359 Fax: +7 495 641 235 U.A.E. Dubai Tel: +971 4 331 61 Fax: +971 4 332 343 U. K. Middlesex Tel: +44 1 95 43 53 Fax: +44 1 95 45 95 Sunderland Tel: +44 191 522 2 Fax: +44 191 522 252 Asia Pacific Australia Brisbane 3 Suscatand Street Rocklea Queensland 416 Tel: +617 3274 579 Fax: +617 3274 655 Melbourne 1/46 Venture Drive Sunshine West VIC 32 Tel: +(3) 9336 1322 Fax: +(3) 9336 13 Sydney 142 Magowar Road Girraween, NSW 2145 Tel: +61 2 996 4433 Fax: +61 2 996 3122 China Beijing Tel: +6 1 5674761 Fax: +6 1 567476 Xi an Tel: +6 29 791465 Fax: +6 29 7454 Korea Seoul Tel: +2 2 3439 4 Fax: +2 2 3439 45 Philippines Makati City Tel: +63 2 44 9437 Fax: +63 2 44 4712 Factories Brazil Alphaville China Zhangjiagang France Charlieu La Clayette Moulins Germany Wilhelmshaven India Calcutta Pune Italy Niella Tanaro Portugal Baltar Fânzeres Slovakia Saris U.S.A. Manitowoc Port Washington Shady Grove Constant improvement and engineering progress make it necessary that we reserve the right to make specification, equipment and price changes without notice. Illustrations shown may include optional equipment and accessories, and may not include all standard equipment. www.manitowoc.com 2 MANITOWOC Printed in USA Form No. Part No. 422 / 7 / 1M