FORKLIFT TRUCK SCALES iforks Completely wireless fork scale BENEFITS 5 Minutes installation Completely wireless: no cabling Digital calibration Weight correction for forklift mast tilt No de-rating of lift truck capacity Energy eicient power management Fork LED s indicate battery status Tested 1,000,000 cycles at 125% of capacity Top quality Plug & weigh
iforksiiforks FUNCTIONS Automatic and manual zero correction Gross/net weighing Automatic tare and manual tare weight entry Totalling with sequence number ID-code entry (5 digits) Piece counting, by sampling or piece weight entry Three data output modes: print, continuous and command/ answer Power management user menu Internal clock for date and time Error messages in display Auto shut-of function for optimal battery life Overload protection 200% DIMENSIONS IN MM Class II 5,000lb* Class III 6,000lb* Class III 10,000lb* STANDARD SPECIFICATIONS Capacity 5,000, 6,000 or 10,000 lb * Graduation multirange: 2-5 lb at 5,000 lb capacity 2-5 lb at 6,000 lb capacity 5-10 lb at 10,000 lb capacity System tolerance 0.1% of the load lifted Display LCD, digit height 0.7 inch, adjustable backlight Signal transfer Bluetooth, class 1 Controls 4 function keys, on/of key Protection class NEMA 4 / IP65 A Fork length 42 42 42 B Fork width 5.25 6 6.8 C Height above carriage 2.7 2.7 2.8 D Height carriage 16 20 20 D Distance claws E Fork drop** A/B 3/6 3/8 3/8 F Distance between carriage and stop plate 3.15 3.15 3.9 G Thickness of fork tip 0.6 0.6 0.6 H Width of fork base 4 4.7 5.5 I Width of battery pack 2 2 2 J Height of stop plate 3.5 3.5 3.5 K Fork height 2.4 2.4 2.9 L Thickness fork 2.4 2.4 3 POWER SUPPLY Each fork has his own rechargeable battery pack which includes a charger for both batteries Indicator powered by 4 AA-batteries The system has an auto shut-of function for optimal battery life The operator can customize the power settings in the Power Management menu on the indicator Weight, per fork 147 lb 175 lb 260 lb Tolerance +/- 0.1 inch * Capacity specifi ed at load centre point 24 inch ** Specify fork drop type upon order, tolerance dimension +/- 0.2 inch * (in combination with rotators: capacity reduction of 15%) OPTIONS* NTEP-approved scale for commercial transactions, 5,000 x 5 lb Thermal or matrix printer (6V or 12V) Bluetooth, WiFi or serial output UniMobile / UniWin software for data capture & transfer 12-12V regulator for fixed power supply on IC trucks Electronic level correction sensor, compensates for up to 5 tilting of the mast Different fork lengths * The use of options may change related specifications. rev.20170508
FORKLIFT TRUCK SCALES iforks TOUCH Completely wireless fork scale with Touch screen indicator BENEFITS 7.1 touchscreen indicator with advanced functions Programmable user interface Completely wireless: no cabling USB port for data capture Optional WiFi or Bluetooth output Tested 1,000,000 cycles at 125% of capacity No de-rating of lift truck capacity The hi-tech standard Plug & weigh
iforks TOUCH FUNCTIONS Automatic and manual zero correction Gross/net weighing Automatic and manual tare via touch screen Entry of alphanumeric codes Power management user menu Internal clock for date and time Error messages in display Weighing, Counting, Totalizing and Dosing DIMENSIONS IN INCHES STANDARD SPECIFICATIONS Capacity 5,000, 6,000 or 10,000 lb Graduation Multirange 2-5 lb at 5,000 lb capacity 2-5 lb at 6,000 lb capacity 5-10 lb at 10,000 lb capacity System tolerance 0.1% of the load lifted Display 7.1 inch, high resolution touch screen Signal transfer wireless Protection class NEMA 4 / IP65 Fork LED s on/off status Battery cycle time 50 hours on fully charged batteries POWER SUPPLY Fork modules by rechargeable 6V battery packs, charger included. Indicator 12V by truck battery and stop plate Class II 5,000 lb* Class III 6,000 lb* Class III 10,000 lb* A Fork length 42 42 42 B Fork width 5.25 6 6.8 C Height above carriage 3.9 3.9 4.0 D Height carriage 16 20 40 E Fork drop** A/B 3/6 3/8 3/8 F Distance between carriage 3.15 3.15 3.9 G Thickness of fork tip 0.6 0.6 0.6 H Width of fork base 4 4.7 5.5 I Width of battery pack 2 2 2 J Height of stop plate 3.5 3.5 3.5 K Fork height 2.4 2.4 2.9 L Thickness fork 2.4 2.4 3 Weight, per fork 147 lb 175 lb 260 lb Tolerance +/- 0.1 inch * Capacity specified at load centre point 24 inch ** Specify fork drop type upon order, tolerance dimension +/- 0.2 inch TS LFT RAVAS-LFT-printiFORKS TOUCH EN USA rev.18.02.07 Changes reserved OPTIONS* NTEP-approved scale for commercial transactions FlexBlock technology for higher accuracy Barcode reader via USB port Bluetooth, WiFi or serial output Cubetape connection via Bluetooth Thermal (barcode) or matrix printer Customized print layout Extra set of rechargeable battery packs Electronic level correction sensor, compensates for up to 5 tilting of the mast Different fork lengths * The use of options may change related specifications
FORKLIFT TRUCK SCALES Logistics iforks Completely wireless fork scale with extra thin forks BENEFITS Extra thin forks for easy handling of low pallets 5 Minutes installation Completely wireless: no cabling Digital calibration Bluetooth data transfer Fork LED s indicate battery status Tested 1,000,000 cycles at 125% of capacity Top quality Plug & weigh
Logistics iforks FUNCTIONS Automatic and manual zero correction Gross/net weighing Automatic tare and manual tare weight entry Totalling with sequence number ID-code entry (5 digits) Piece counting, by sampling or piece weight entry Three data output modes: print, continuous and command/ answer Power management user menu Internal clock for date and time Error messages in display Auto shut-off function for optimal battery life Overload protection 200% DIMENSIONS IN INCHES H I C D E L F A B G J K STANDARD SPECIFICATIONS Capacity 5,000 lb Graduation multirange: 0-2000 lb in 2 lb steps, 2000-5000 lb in 5 lb steps System tolerance 0.1% of the load lifted Display LCD, digit height 0.7 inch, adjustable backlight Signal transfer Bluetooth, class 1 Controls 4 function keys, on/off key Protection class NEMA 4 / IP65 POWER SUPPLY Easily exchangeable, rechargeable, ergonomic and robust battery pack on each fork. Charger included. Indicator powered by 4 AA-batteries The system has an auto shut-off function for optimal battery life The operator can customize the power settings in the Power Management menu on the indicator Weight, per fork Class II 5000 lb* A Fork length 42 B Fork width 6.4 C Height above carriage 2.7 D Height carriage 16 E Fork drop 3 F Distance between carriage 2.9 and stop plate G Thickness of fork tip 0.4 H Width of fork base 5.3 I Width of battery pack 3.35 J Height of stop plate 3.5 K Fork height 1.9 L Thickness fork 2.05 180 lb Tolerance +/- 0.1 inch * Capacity specified at load centre point 20 inch TS LFT RAVAS-LFT-printLogistics iforks EN USA rev.16.10.07 Changes reserved OPTIONS* Thermal (12V) or matrix (12V) printer Bluetooth, WiFi or serial output UniMobile PDA software Integrated power converter 24V-72V for indicator power supply via truck battery 12-12V regulator for fixed power supply on diesel and gas trucks Different fork lengths Electronic level correction sensor, compensates for up to 5º tilting of the mast Extra rechargeable fork battery packs * The use of options may change related specifications
FORKLIFT TRUCK SCALES RCS Hydraulic load indication for forklift trucks BENEFITS Attractively priced load check system for forklifts Optional available with overload buzzer Easy installation For all capacity trucks Indicator with 4 AA-batteries Suitable for rough applications For shipping weights, avoiding overloads and safety checks Top quality Best price
RCS HOW RCS WORKS Markings on the forklift mast indicate the weight read-out point, The load is lifted until just past the markings on the mast, Then the load is lowered to the reference markings, After 3 seconds the indicator shows the weight. SYSTEM PACKAGE Weighing sensor Sealing ring Indicator 110 with 4 AA-batteries and mounting bracket Lifting height reference mark stickers Mounting- and calibration instructions Operator manual WEIGHING TOLERANCES LIFTING CAPACITY MAXIMUM TOLERANCE * 500 lb 100 lb 2,000 lb 100 lb 4,000 lb 100 lb 5,000 lb 100 lb 6,000 lb 200 lb 10,000 lb 200 lb 15,000 lb 400 lb 20,000 lb 400 lb * Tolerance may occur above or below the weight on the display STANDARD SPECIFICATIONS Capacity to fit the capacity of the truck (5,000, 10,000 or 20,000 lb) Graduation 10 lb at 5.000 lb capacity 20 lb at 10,000 lb capacity 50 lb at 20,000 lb capacity System tolerance 2% of system capacity at centered load (se table on the right) Protection class NEMA 4 / IP65 Display LCD, digit height 0.7 inch Controls 3 function keys, on/off key Power supply 6Vdc from 4 AA-batteries Battery cycle time 6 months, when used normally Auto shut-off after 3 minutes of non-use TS LFT RAVAS-LFT-printRCS EN USA rev.16.04.28 Changes reserved OPTIONS* 12V power supply from truck battery Integrated power converter 24V-72V for indicator power supply via truck battery Thermal printer Overload buzzer * The use of options may change related specifications
FORKLIFT TRUCK SCALES RCS Hy-Q Hydraulic scale for forklift trucks and reach trucks BENEFITS High accuracy hydraulic scale Less sensitive to load center point eccentricity Overload indication in display Use in combination with rotators and clamps Suitable for rough applications Intuitive full color graphic display guides the user No manifold block: easy and cost efficient installation Top quality Indestructible
RCS Hy-Q FUNCTIONS Manual zero correction Self-learning zero correction Gross/Net weighing (by tare weighing or preset tare entry) Total function with five separate registers that can be named by the operator. Name length max. 16 alpha-numeric characters Overload indication, based on actual hydraulic pressure, not on calculated weight Error message in display SYSTEM PACKAGE Hy-Q indicator with graphic display RAM indicator mounting support Oil pressure sensor G¼ BSP male Metal strip with 2 sensors for mast mounting Magnet, to be installed on the carriage plate Installation- and calibration manual Operator manual STANDARD SPECIFICATIONS Capacity 5,000 lb till 200,000 lb Graduation 5 lb at 5,000 lb capacity 10 lb at 10,000 lb capacity 20 lb kg at 20,000 lb capacity 50 lb at 50,000 lb capacity 100 lb at 100.000 lb capacity 200 lb at 200,000 lb capacity System tolerance 0.2% of the scale capacity Display Grafic full-color display Keyboard 9 keys Protection class NEMA 4 Power supply 12Vdc, from truck battery HOW RCS HY-Q WORKS Two sensors in a metal strip mounted against the mast measure the lifting and lowering speed of the forks. While the load passes the trajectory between the two sensors, the indicator samples the hydraulic pressure output of the sensor approximately 1000 times and calculates an average value. The weighing is done UP and DOWN: the load is lifted, and then lowered past the two sensors within a predefined speed bandwidth. Warning: the 0.2% tolerance can only be guaranteed when the truck mast is in good condition. TS LFT RAVAS-LFT-printRCS Hy-Q EN EU rev.15.09.10 Changes reserved OPTIONS* Power convertor 80/ 72/48/36/24 Vdc 12 Vdc RS232 output for printer or data transfer (only 1 port available) Thermal or matrix printer in separate housing Bluetooth or WiFi output WeighScan data collector with built-in 1D barcode scanner CubeTape digital dimensioning tape Level switch to indicate forklift mast tilt position at display * The use of options may change related specifications, changes reserved, rev.20160428
FORKLIFT TRUCK SCALES RCS PLUS Hydraulic scale for forklift trucks BENEFITS Accurate hydraulic scale Used with any forklift attachment For trucks with capacities up to 65,000 Lbs Suitable for rough applications No de-rating of lift truck capacity Easy to calibrate Top quality Good accuracy
RCS PLUS FUNCTIONS Manual zero correction Gross/net weighing Manual tare entry Code entry (5-digit) Totalling with sequence number lb/kg toggle Error messages in display HOW RCS PLUS WORKS Markings on the forklift mast indicate the reference height point, The load is lifted until the markings line up, Press the red weigh button on the indicator, During a controlled descent of the forks, the weight is measured The weight is shown on the indicator. SYSTEM PACKAGE Hydraulic valve block with oil pressure sensor and flow adjustment regulator Indicator 310 plus RAM indicator mounting support Lifting height reference mark stickers Installation- and calibration instructions Operator manual STANDARD SPECIFICATIONS Capacity 5,000, 10,000 or 20,000 lb Graduation 5 lb at 5,000 lb capacity 10 lb at 10,000 lb capacity 20 lb at 20,000 lb capacity System tolerance 0.2% of the scale capacity Display LCD, digit height 0.7 inch, adjustable backlight Controls 4 function keys, on/off key Protection class NEMA 4 / IP65 Power supply 12Vdc, from truck battery Please note: the 0.2% tolerance can only be guaranteed if the truck mast is in good condition and the weighing system is used correctly. Rollers and bearings in the mast should be properly lubricated. During weighing, the mast should be in vertical position, the load should be placed in the center of the forks. TS LFT RAVAS-LFT-printRCS PLUS EN USA rev.16.04.28 Changes reserved OPTIONS* High capacity hydraulic valve block, for capacities above 65,000 lb; graduation 100 lb Integrated power converter 24V-72V for indicator power supply via truck battery Thermal printer Bluetooth, WiFi or serial output * The use of options may change related specifications
FORKLIFT TRUCK SCALES RVL Wireless carriage plate scale for couterbalanced trucks BENEFITS No cabling For use with rotators and clamps Max. tolerance 0.2% of the load lifted Data transfer to WMS or ERP systems Top quality For industrial use
RVL FUNCTIONS Functions of 110, 310, 610 or Touch weight indicator See indicator specification sheet DIMENSIONS IN INCHES B The RAVAS indicators have been developed exclusively for mobile applications. They are robust and resistant to shocks and vibrations. RAVAS indicators are compact and have a low power consumption. All indicators are dust and waterproof, according to norm IP65. RAVAS mobile scales can be used outdoors. STANDARD SPECIFICATIONS Capacity 5,000, 10,000 or 15,000 lb Graduation 5 lb at 5,000 lb capacity 10 lb at 10,000 lb capacity 20 lb at 15,000 lb capacity System tolerance 0.2% of the load lifted Overload protection 200% Protection class NEMA 4 / IP65 Cabling via spiral cable Power supply from truck battery, via regulator C A A' F Class 2 5000 lb* Class 3 10000 lb* A 41.5 44.1 55.1 A1 35 36.2 45.7 B 4.33 5.31 6.30 C 2.56 3.15 4.33 D 16 20 25 E 4.72 6.69 8.27 F 1/3 A 1/3 A 1/3 A E C Class 4 15000 lb* 500 lb 1000 lb 1430 lb D TS LFT RAVAS-LFT-printRVL EN USA rev.16.04.28 Changes reserved OPTIONS* Bluetooth, WiFi or serial output Different width WeighScan Thermal or matrix printer in separate housing UniMobile PDA software Integrated power converter 24V-72V for indicator power supply via truck battery Smaller display graduations * The use of options may change related specifications