7.5' Warm White/Multi Sylvania LiteTunes LED One Plug Tree, #V67258-26 Thank you for purchasing this new Sylvania One Plug tree. This tree assembles with Quick Connect technology for a faster, easier, and safer tree. Your new tree is lit with low voltage energy saving LED lights. This 7.5ft tree is pre lit with 600 Warm White LED lights: CARTON INCLUDES: 3 Pre-lighted tree sections (A-Top, B-Middle, C Bottom) 1 Sturdy metal tree base 1 Screw for tree base 8 Spare Bulbs ASSEMBLY INSTRUCTIONS FOR TREE STAND 1. Place the Tree Base on a level surface. Unfold the base and make sure each leg is at an even angle and insert the screw into the hole and tighten according to the magnificent drawing as Fig.1a. The plug 1 is Tree power. The Plug 2 is the speaker power. 2. There is equipment on the stand. The green box is control box. The black one is a speaker. The green connector connects the control box with speaker. The one end of the pink connector connects to the control box. The other side of the pink connector connects to the MP3/Ipod. If you play the songs on MP3/Ipod, the lights will flash along with the music melody. On the side of the speaker, there is an on/off switch, voice balance and a receiver jack to control the speaker. ASSEMBLY INSTRUCTIONS FOR TREE Note: Before you start to assemble your tree please choose a location near an electrical wall outlet. Place the tree stand on a level surface. Assemble tree stand according to the assembly instruction for the tree stand. Please remove protective covers from the base of the pole from each section. 1. Place the assembled tree base on a level surface. 2. Insert bottom section (C) into the base. Rotate the bottom section (C) slightly to ensure its matching the base and proper circuit connection if lights are not functioning. (See Fig. 1) 3. Insert middle section (B) into bottom section (C).Rotate the middle section (B) slightly to ensure its matching the bottom section (C) and proper circuit connection if lights are not functioning. (See Fig. 2) 4. Insert top section (A) into middle section (B). Rotate the top section (A) slightly to ensure its matching the middle section (B) and proper circuit connection if lights are not functioning. (See Fig. 3) 1
5. Allow the branches to fall into place or gently pull branches up and out. When adjusting branches be sure that all wires are free of branch hinges.(see Fig.4) 6. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one at the center of the main stem. Repeat pattern for each branch (See Fig.5). 7. Plug the speaker power cord and the tree power cord into properly outlets. If you play songs on your selected MP3 player (not included), the lights will dance to the music and turn on the remote control, the lights will dance to the music and there are another 11 lighting functions for selection. Please follow the remote control instructions. If you play songs on your smart phone, please follow the LiteTunes Tree instructions to control LiTetunes Tree by your cell phone. REMOTE CONTROL INSTRUCTIONS Please note this tree has a remote control. Please pull out the insulating tape from the remote control, before starting to use it. Insulating tape 1. The first button is for the on/off power switch for the lights and the second button is for choosing different functions. 2
2. Connect the MP3 player (not included) to the pink connector and press /Fn button. Select from the following lighting functions: Function 1: Music Dancing Function 2: Auto Combination Function 3: Warm White Steady-on, Multi Cascade Function 4: Warm White Steady-on, Multi Fade-in & Fade-out Function 5: Warm White Fade-in & Fade-out, Multi Steady-on Function 6: Steady-on Function 7: Warm White Steady-on Function 8: Multi Steady-on Function 9: Warm White Steady-on, Multi Twinkle Function 10: Warm White Twinkle, Multi Steady-on Function 11: Warm White Steady-on, Multi Random Twinkle Function 12: Fade-in & Fade-out If the remote control does not work, check whether the battery of the remote control is out of power. To replace the remote control battery: 1. Use Phillips screwdriver to open the back cover of the remote control. 2. Replace with a new alkaline A23 (12 volt) battery into the compartment. WARNING: This is not a toy and is not intended for use by children. (A) Do not dispose of the battery in fire as the battery may leak and explode. (B) Do not mix old and new batteries and do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. (C) Exhausted batteries are to be removed from the product. (D) Use type A23 (12 volt) batteries. Safe for indoor use. 3
LITETUNES TREE INSTRUCTIONS Please remove the pink connector cord if using Wifi. 1. Download application named LiteTunes Tree on your smart phone. 2. Go to phone setting for WiFi setting. Look for LiteTunes Tree and select it to get connected. Please enter the wifi password: Litetunes to start the LiteTunes Tree app. 3. Start LiteTunes Tree App. 4. The opening screen of application LiteTunes Tree is shown on Fig. 1. 5. Main Menu is shown on Fig. 2. Fig. 1 Fig. 2 MAIN MENU FUNCTIONS 1 2 3 4 1. POWER SWITCH (for Tree Lights) This is to turn on/off the tree lights. 2. TREE LIGHT FUNCTIONS SELECTION 12 functions can be selected sequentially by each pressing. The color of this icon changes after each pressing. 3. MUSIC PLAYER 4. TIMER FUNCTION 4
MUSIC PLAYER FUNCTION 1 2 3 1. Music Selection 2. Player Functions (from left to right): Random Play Back Play Forward Stop 3. Current Music Playing Position TIMER FUNCTION Lights will stay on for the time selected. 5
MUSIC PLAYER OPERATION FOR IPHONE USER 1. Touch the music icon from the main menu. 2. Application will automatically take you to your music playlist on your phone. 3. Select a song from your music playlist. Once selected, swipe screen from bottom to top to open new screen as pictured. 4. Towards the bottom of the newly opened screen you will touch the airplay tab. On the next screen select show tab and the music will begin playing through the tree with the lights in sync with the music. 5. Detailed step by step images shown on Figure 1 thru 6 Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Congratulations your new Pre-lit Tree is now complete and ready for decorating! 6
TROUBLE SHOOTING: 1. If entire tree does not light, make sure the plug is securely inserted into a working electrical outlet. 2. If an entire section of the tree does not light: Check to be sure that each section of the tree is well connected. 3. If plug does not fit: This product contains a cord with a polarized plug (one prong is wider than the other) as a feature to reduce the risk of electrical shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with any extension cord unless the plug can be fully inserted. Do not alter or replace the plug. 4. Sometimes the connection terminates and the tree will not respond to the APP. If this occurs the user should turn the Wi-Fi off and back on again to get it working properly. BULB REPLACEMENT: 1. Grasp plug and remove from its power source. 2. Remove the reflector of the bulb.(see Fig.1) 3. Pull bulb straight out of socket. Do not twist bulbs.(see Fig.2) 4. Replace burned bulb with 3.0 volt, 0.06 watt LED bulb ONLY. Directly insert the LED bulb into the lampholder.(see Fig.3) 5. If the bulb doesn t light, please change the LED bulb s direction to insert into the lampholder (Additional bulbs are included for your convenience). (See Fig.4) 6. Insert the reflector on the LED bulb. (See Fig.5) Fig.1 Fig.2 Fig.3 Fig.4 Fig.5 IMPORTANT SAFETY INSTRUCTIONS a) READ AND FOLLOW ALL SAFETY INSTRUCTIONS b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation. c) This seasonal use product is not intended for permanent installation or use. d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat. e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. f) Do not let lamps rest on the supply cord or on any wire. g) Unplug the product when leaving the house, or when retiring for the night, or if left unattended. h) This is an electric product not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. i) Do not use this product for other than its intended use. j) Do not hang ornaments or other objects from cord, wire, or light string. k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation. l) Do not cover the product with cloth, paper or any material not part of the product when in use. m) This product is equipped with push-in type lamps. Do not twist lamps. n) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be fully inserted. Do not alter or replace the plug. o) Read and follow all instructions that are on the product or provided with the product. 7
p) SAVE THESE INSTRUCTIONS This product carries a 2 year limited warranty. This warranty does not cover damage resulting from accident, misuse, abuse, negligence, or normal wear and any discoloration. The warranty is in force from the date that you purchased this tree. There is no need to register your purchase, however it is most important that you retain your Home Shopping Network sales receipt as proof of purchase. Receipt is required for warranty service. Please note this warranty is non-transferable and is voided if the product is not used as intended. Please contact our customer service line at (800) 414-3434 for warranty service and trouble shooting hints. STORAGE: Disassembled tree can be stored in its original box. Store tree in a cool dry place where the temperature does not exceed 100 degrees Fahrenheit. SYLVANIA is a registered trademark of OSRAM SYLVANIA INC. used under license. 8