118 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 11 ENCLOSURE Panels (Full & Half Length) For Single-Door Enclosures Panels for single-door enclosures can be positioned anywhere along the horizontal mounting channels. Half-length panels can be located in the upper or lower portion Mounting hardware is included. All panels are made of heavy gauge steel and powder coated white. Full Panel SCE-60P24F1 48.00 20.00 60.00 24.00 P 17.85 SCE-60P6F1 48.00 2.00 60.00 6.00 P 226.00 SCE-72P24F1 60.00 20.00 72.00 24.00 P 16.20 SCE-72P0F1 60.00 26.00 72.00 0.00 P 228.4 SCE-72P6F1 60.00 2.00 72.00 6.00 P 258.2 SCE-0P24F1 78.00 20.00 0.00 24.00 P 228.4 SCE-0P6F1 78.00 2.00 0.00 6.00 P 10.45 Half Panel SCE-60P24F2 24.88 20.00 60.00 24.00 P 116.72 SCE-60P6F2 24.88 2.00 60.00 6.00 P 141.56 SCE-72P24F2 0.88 20.00 72.00 24.00 P 126.66 SCE-72P0F2 0.88 26.00 72.00 0.00 P 141.56 Full Panel SCE-72SP24F 60.00 18.81 72.00 24.00 P2 2.41 SCE-72SP0F 60.00 24.81 72.00 0.00 P2 454.50 SCE-72SP6F 60.00 0.81 72.00 6.00 P2 516.5 SCE-0SP6F 78.00 0.81 0.00 6.00 P2 61.44 Half Panel SCE-72SP24F4 0.88 18.81 72.00 24.00 P 27.0 SCE-72SP0F4 0.88 24.81 72.00 0.00 P2 00.51 SCE-72SP6F4 0.88 0.81 72.00 6.00 P2 5.28 SCE-0SP6F4.88 0.81 0.00 6.00 P2 87.44 ENCLOSURE Swing-Out Panels Panels are available full length and half length and can be mounted on either side of the enclosure. Panels have heavy gauge steel support frames and heavy gauge continuous hinges to allow the panel to swing completely out Mounting hardware is included. Made of heavy gauge steel and powder coated white. For technical information, consult our Installation Manual at www.saginawcontrol. SCE-72P6F2 0.88 2.00 72.00 6.00 P 158.5 SCE-0P24F2.88 20.00 0.00 24.00 P 141.56 SCE-0P6F2.88 2.00 0.00 6.00 P 18.7 Panels (Full & Half Length) For Two-Door Enclosures Full Panel Panels for two-door enclosures can be positioned anywhere along the horizontal mounting channels. Half-length panels can be located in the upper or lower portion Mounting hardware is included. All panels are made of heavy gauge steel and powder coated white. SCE-60P48F1 48.00 44.00 60.00 48.00 P 62.60 SCE-72P48F1 60.00 44.00 72.00 48.00 P 40.7 SCE-72P60F1 60.00 56.00 72.00 60.00 P 474.6 SCE-72P72F1 60.00 68.00 72.00 72.00 P 541.42 SCE-0P48F1 78.00 44.00 0.00 48.00 P 481.82 SCE-0P72F1 78.00 68.00 0.00 72.00 P 650.6 Catalog Enclosure Enclosure Product List No. No. of Units Height Width Code Price SCE-720SOF1 72.00 0.00 P2 8.2 Swing-Out Rack Mounting Frames Side Mount Panels Designed to provide extra mounting space on the side of an enclosure. Can be securely attached to the mounting channels. Plated mounting hardware is supplied. Bent on vertical sides. Made of heavy gauge steel and powder coated white. Individual Panel Supports Individual panel supports are available for additional equipment mounting. All mounting hardware included. Made of heavy gauge steel and plated. Half Panel SCE-72P48F2 0.88 44.00 72.00 48.00 P 260.78 SCE-72P60F2 0.88 56.00 72.00 60.00 P 25.55 SCE-72P72F2 0.88 68.00 72.00 72.00 P 27.8 SCE-0P48F2.88 44.00 0.00 48.00 P 28.0 SCE-0P72F2.88 68.00 0.00 72.00 P 84.5 SCE-60SMP14 48.00 14.00 60.00 18.00 P 18.74 SCE-72SMP14 60.00 14.00 72.00 18.00 P 155.72 SCE-72SMP20 60.00 20.00 72.00 24.00 P 12.5 SCE-0SMP14 78.00 14.00 0.00 18.00 P 226.51 SCE-0SMP20 78.00 20.00 0.00 24.00 P 25.00 SCE-0SMP0 78.00 0.00 0.00 6.00 P 254.81 No. Notes Code Price SCE-FSPS4 Set of 4 P2 55.88 SCE-FSPS6 Set of 6 P2 84.44 SCE-FSPS8 Set of 8 P2 126.66 SCE-726SOF1 72.00 6.00 P2 41.7 SCE-06SOF1 4 0.00 6.00 P2 442.08 Catalog Height Width Depth Enclosure Product List No. (A) (B) (C) Depth Code Price SCE-14RMW 6.00 5.00 14.00 18.00 P2 18.6 SCE-20RMW 6.00 5.00 20.00 24.00 P2 22.52 Accessory Guide Designed for mounting 1.00 rack-mounting equipment. The frame pivots within the enclosure for access to the back of the mounted equipment. A nylon bearing allows easy movement. Quick release latches hold the frame closed. One clip nut package (CN102) is included. Made of heavy gauge steel and powder coated white. For technical information, consult our Installation Manual at www.saginawcontrol. Removable Wire Cover Designed to cover the wires in the bottom One wire cover required per door. Mounting hardware is included. Made of heavy gauge steel and powder coated white.
120 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 121 ENCLOSURE Rack Mounting Angle (Type RA) - U Shape Designed for mounting 1 inch and 24 inch rack mount equipment. Available in pairs of full length angles with mounting holes. Use clip nut package (CN102) to provide tapped holes. Mounting hardware is supplied. Made of heavy gauge steel and powder coated white. Rack Mounting Angle (Type RP) - L Shape Designed for mounting 1 inch and 24 inch rack mount equipment. Available in pairs of full length angles with mounting holes. Use clip nut package (CN102) to provide tapped holes. Mounting hardware is supplied. Made of heavy gauge steel and powder coated white. Catalog Angle Enclosure Enclosure Rack Product List No. Length Height Width Size Code Price SCE-60RA1TH 4.00 60.00 24.00 1 P2 106.80 SCE-72RA1TH 61.25 72.00 24.00 1 P2 114.24 SCE-72RA24TH 61.25 72.00 0.00 24 P2 114.24 SCE-0RA1TH 78.75 0.00 24.00 1 P2 124.18 Catalog Angle Enclosure Enclosure Rack Product List No. Length Height Width Length Size Code Price SCE-60RP24F5 4.00 60.00 24.00 Full 1 P2 106.80 SCE-72RP24F5 61.25 72.00 24.00 Full 1 P2 124.18 SCE-72RP0F5 61.25 72.00 0.00 Full 24 P2 124.18 SCE-0RP24F5 78.75 0.00 24.00 Full 1 P2 166.40 SCE-60RP24F6 26.25 60.00 24.00 Half 1 P2 62.0 SCE-72RP24F6 1.50 72.00 24.00 Half 1 P2 76. SCE-72RP0F6 1.50 72.00 0.00 Half 24 P2 76. SCE-0RP24F6 40.25 0.00 24.00 Half 1 P2 4.8 HEAVY-DUTY PANEL SUPPORTS Catalog Enclosure Support Product List No. Height Length Code Price SCE-60FSHDPS 60.00 57.25 P2 114.24 ENCLOSURE SCE-72FSHDPS 72.00 6.25 P2 124.18 SCE-0FSHDPS 0.00 87.25 P2 16.60 CENTER PANEL SUPPORTS Catalog Enclosure Product List No. Height Code Price SCE-60FSCPS 60.00 P2 11.22 SCE-72FSCPS 72.00 P2 11.6 SCE-0FSCPS 0.00 P2 156.47 CENTER SUPPORTS Catalog Enclosure Product List No. Height Code Price SCE-72FSCS 72.00 P2 11.6 SCE-0FSCS 0.00 P2 156.47 Heavy-Duty Panel Supports Available in pairs to mount panels when heavy equipment is installed on the panels. Panel mounting studs are adjustable so a panel of any height can be mounted. Used in place of individual supports. Mounting hardware furnished with enclosures. Made of heavy gauge steel and powder coated white. For technical information consult our Center Panel Supports Designed to be installed in any two-door single access or dual access free-standing enclosure. For installation of panels, swingout panels, rack mounting angles, and swing-out rack mounting frames. The center panel support can be positioned from front to back in the enclosure. Plated mounting hardware is supplied. Made of heavy gauge steel and powder coated white. For technical information consult our Installation Manual at www.saginawcontrol. Center Supports Clamping Nuts Clamping nuts with a #10-2 retained nut will fit all rack mounting angles and rack mounting frames, to provide tapped holes. Nuts are zinc plated. Channel Nuts Designed for use in free-standing enclosures to allow mounting of additional equipment. Nuts are zinc plated. No. Per Kit Code Price SCE-CN102 20 P2 2.1 No. Description Per Kit Code Price SCE-PS1420CN 1/4-20 Strut Nut 20 SCE-PS816CN /8-16 Strut Nut 20 Designed to attach to the top and bottom mounting channels Provides support for full and half panels in any free-standing two-door enclosure. Can be positioned from front to back in the enclosure. Can be used with heavy duty panel supports to use panels of various heights. Mounting hardware is included. Made of heavy gauge steel and powder coated white. Channel Nut Kit Designed for use with the light channels on the inside top of SCE larger enclosures to allow easy installation of lights. Nuts are zinc plated. No. Description Per Kit Code Price SCE-PS102CN 10-2 Channel Nut 20 P2 6.02 Heavy-Duty Panel Supports Center Panel Supports Center Supports Accessory Guide
126 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 127 Multi-Door / Wall- Mount Enclosures For Flange-Mounted TWO-DOOR / WALL-MOUNT ENCLOSURES FOR FLANGE-MOUNTED DISCONNECTS SUB-PANEL (P) SUB-PANEL (P) SCE-6X2D5412 6.00 5.75 12.00 IS4 1,46.80 SCE-6P52 2.00 48.00 161.54 SCE-48XD11818 48.00 117.50 18.00 IS,065.56 SCE-48P76 44.00 72.00 51.48 & SCE-42X2D5412 42.00 5.75 12.00 IS4 1,50.7 SCE-42P52 8.00 48.00 20. SCE-48P7 44.00 4.00 148.54 SCE-48X2D7812 48.00 77.75 12.00 IS 1,04.4 SCE-48P76 44.00 72.00 51.48 SCE-48X2D7818 48.00 77.75 18.00 IS 2,125.52 SCE-48P76 44.00 72.00 51.48 Designed to easily accommodate various types of mounting methods with minimal modifications. Provisions are provided in the back of the enclosure for wall or frame mounting, and in the bottom for wall mount brackets, frame mount, or partial provisions for a floor stand kit. Enclosure is designed to house most standard type disconnects. For installation information, consult our Installation Manual at www.saginawcontrol. 0.104 carbon steel. Flange trough collar around all sides of door opening. Body stiffeners in large enclosures for extra rigidity. Heavy duty lifting eyes anchor into reinforced top. Removable center posts permit easy panel installation. handle on main door with black zinc die cast padlocking handle on slave doors. -point latching mechanism. Ends of latch rods have ramp shoes for easier door closing. Collar studs for mounting optional sub-panel. Disconnect switch (or circuit breaker) and operating mechanism are not furnished with enclosure. ANSI-61 gray powder coated inside and out. Optional sub-panels are powder coated white. THREE-DOOR / WALL-MOUNT ENCLOSURES FOR FLANGE-MOUNTED DISCONNECTS FOUR-DOOR / WALL-MOUNT ENCLOSURES FOR FLANGE-MOUNTED DISCONNECTS SUB-PANEL (P) SCE-48X4D15818 48.00 157.50 18.00 IS 4,186.87 SCE-48P76 (2) 44.00 72.00 51.48 Multi-Door / Wall- Mount Enclosures For Flange-Mounted Designed to easily accommodate various types of mounting methods with minimal modifications. Provisions are provided in the back of the enclosure for wall or frame mounting, and in the bottom for wall mount brackets, frame mount, or partial provisions for a floor stand kit. Enclosure is designed to house most standard type disconnects. For installation information, consult our Installation Manual at www.saginawcontrol. 0.104 carbon steel. Flange trough collar around all sides of door opening. Body stiffeners in large enclosures for extra rigidity. Heavy duty lifting eyes anchor into reinforced top. Removable center posts permit easy panel installation. handle on main door with black zinc die cast padlocking handle on slave doors. -point latching mechanism. Ends of latch rods have ramp shoes for easier door closing. Collar studs for mounting optional sub-panel. Disconnect switch (or circuit breaker) and operating mechanism are not furnished with enclosure. ANSI-61 gray powder coated inside and out. Optional sub-panels are powder coated white. IS - Industry Standards - NEMA Type R, 12 & Type 1 UL Listed Type R & 12 CSA Type R & 12 IS - Industry Standards - NEMA Type R, 12 & Type 1 UL Listed Type R & 12 CSA Type R & 12 NEMA Type R, 4, 12 & Type 1 UL Listed Type R, 4 & 12 CSA Type R, 4 & 12 IEC 6052 IP 66 ***Special Instructions apply for IS, IS4 and IS6 to maintain the environmental rating of Type R for these parts. See the Special Instructions on the Industry Standards page in the Technical Information Section. Enclosures NEMA Type R, 4, 12 & Type 1 UL Listed Type R, 4 & 12 CSA Type R, 4 & 12 IEC 6052 IP 66 ***Special Instructions apply for IS, IS4 and IS6 to maintain the environmental rating of Type R for these parts. See the Special Instructions on the Industry Standards page in the Technical Information Section.
12 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 1 Two-Door Disconnect Enclosures Designed to house most standard type disconnects. For outdoor applications a drip shield and drain holes are required. TWO-DOOR ENCLOSURES WITH PROVISION FOR DISCONNECT ON RIGHT FLANGE SUB-PANEL (P) SCE-60XEL412LP 60.00 4.00 12.00 IS4 2,142.65 SCE-60P48 56.00 44.00 268.8 SCE-60XEL418LP 60.00 4.00 18.00 IS4 2,.74 SCE-60P48 56.00 44.00 268.8 SCE-60XEL424LP 60.00 4.00 24.00 IS4 2,524.84 SCE-60P48 56.00 44.00 268.8 SCE-60XEL6112LP 60.00 61.00 12.00 IS4 2,5.85 SCE-60P60 56.00 56.00 1.68 SCE-60XEL6118LP 60.00 61.00 18.00 IS4 2,60.64 SCE-60P60 56.00 56.00 1.68 SCE-60XEL6124LP 60.00 61.00 24.00 IS4 2,82.42 SCE-60P60 56.00 56.00 1.68 SCE-72XEL6112LP 72.00 61.00 12.00 IS4 2,65.84 SCE-72P60 68.00 56.00 4.8 SCE-72XEL6118LP 72.00 61.00 18.00 IS4 2,88.15 SCE-72P60 68.00 56.00 4.8 SCE-72X712LP 72.00 7.00 12.00 IS 2,47.64 SCE-72P72 68.00 68.00 470. SCE-72XEL712LP 72.00 7.00 12.00 IS4,06.06 SCE-72P72 68.00 68.00 470. SCE-72X718LP 72.00 7.00 18.00 IS,202.04 SCE-72P72 68.00 68.00 470. SCE-72XEL718LP 72.00 7.00 18.00 IS4,28.10 SCE-72P72 68.00 68.00 470. SCE-72X724LP 72.00 7.00 24.00 IS,457.6 SCE-72P72 68.00 68.00 470. SCE-72XEL724LP 72.00 7.00 24.00 IS4,561.6 SCE-72P72 68.00 68.00 470. TWO-DOOR DISCONNECT ENCLOSURES TECHNICAL DATA 0.104 carbon steel. Flange trough collar around all sides of door opening. Concealed hinge. Removable and interchangeable doors. -point latching mechanism. Removable print pocket. Lifting eyes for easy handling. Ground studs on door and body. Collar studs provided for mounting optional sub-panels. Black quarter turn latches as required. 15 removable floor stands. Removable center post. Mechanical interlock No door stiffeners required. handle on main door with black zinc die cast padlocking handle on slave door. Disconnect switch (or circuit breaker) and operating mechanism are not furnished with this enclosure. Part numbers that contain the letter EL that are over 0 Inches wide have quarter turn latches on the center of the door top and bottom. ANSI-61 gray powder coated inside and out. Optional sub-panels are powder coated white. IS1 - Industry Standards - NEMA Type 12 & Type 1 UL Listed Type 12 CSA Type 12 IEC 6052 IP55 NEMA Type R, 4, 12 & Type 1 UL Listed Type R, 4, & 12 CSA Type R, 4 & 12 IEC 6052 IP66 ***Special Instructions apply for IS, IS4 and IS6 to maintain the environmental rating of Type R for these parts. See the Special Instructions on the Industry Standards page in the Technical Information Section. Enclosures
14 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 15 Heavy Duty Enclosures For Flange-Mounted Designed to house electrical equipment and provide protection from dirt, dust, oil and water and to house most standard type disconnects. For installation information, consult our Installation Manual at www. saginawcontrol. 0.125 carbon steel. Flange trough collar around all sides of door opening. Body stiffeners in large enclosures for extra rigidity. Heavy duty lifting eyes anchor into reinforced top. Removable center posts permit easy sub-panel installation. handle on main door with black zinc die cast padlocking handle on slave doors. -point latching mechanism. Ends of latch rods have ramp shoes for easier door closing. Removable sub-panels mount on collar studs. Disconnect switch (or circuit breaker) and operating mechanism are not furnished with enclosure. ANSI-61 gray powder coated inside and out. Sub-panels are powder coated white. IS - Industry Standards - NEMA Type R, 12 & Type 1 UL Listed Type R & 12 CSA Type R & 12 NEMA Type R, 4, 12 & Type 1 UL Listed Type R, 4 & 12 CSA Type R, 4 & 12 IEC 6052 IP 66 ***Special Instructions apply for IS, IS4 and IS6 to maintain the environmental rating of Type R for these parts. See the Special Instructions on the Industry Standards page in the Technical Information Section. HEAVY DUTY ENCLOSURES FOR FLANGE-MOUNTED DISCONNECTS SINGLE-DOOR ENCLOSURES SUB-PANEL (P) SCE-72XM2818 72.00 27.50 18.00 IS4 1,565.7 SCE-64P25** 60.00 21.75 SCE-72XM418 72.00.50 18.00 IS 1,75.8 SCE-64P1** 60.00 27.75 SCE-72XM4018 72.00.50 18.00 IS 1,04.8 SCE-64P7** 60.00.75 SCE-84XM4018 84.00.50 18.00 IS 2,117.56 SCE-76P7** 72.00.75 SCE-84XM4024 84.00.50 24.00 IS 2,177.2 SCE-76P7** 72.00.75 SCE-0XM4018 0.00.50 18.00 IS 2,268.06 SCE-82P7** 78.00.75 SCE-0XM4024 0.00.50 24.00 IS 2,428.0 SCE-82P7** 78.00.75 Galvanized Sub-Panel Installed SCE-84XM4018G 84.00.50 18.00 IS 2,117.56 SCE-76P7GALV** 72.00.75 ** Sub-panel included with enclosure. Replacement sub-panels can be ordered. Prices found in the accessory section. Available within 10 working days if not in stock Enclosures HEAVY DUTY ENCLOSURES FOR FLANGE-MOUNTED DISCONNECTS TWO-DOOR ENCLOSURES SUB-PANEL (P) SCE-72XM5418 72.00 5.75 18.00 IS4 2,748.1 SCE-72XM6618 72.00 65.75 18.00 IS,06. SCE-72XM7818 72.00 77.75 18.00 IS,444.4 SCE-72XM7824 72.00 77.75 24.00 IS,61.72 SCE-84XM7818 84.00 77.75 18.00 IS,82.10 SCE-84XM7824 84.00 77.75 24.00 IS,870.87 SCE-0XM7818 0.00 77.75 18.00 IS 4,082.27 SCE-84XM7818G 84.00 77.75 18.00 IS,4. Available within 10 working days if not in stock SCE-64P52** 60.00 48.00 SCE-64P64** 60.00 60.00 SCE-64P76** 60.00 72.00 SCE-64P76** 60.00 72.00 SCE-76P76** 72.00 72.00 SCE-76P76** 72.00 72.00 SCE-82P76** 78.00 72.00 SCE-0XM7824 0.00 77.75 24.00 IS 4,284.12 SCE-82P76** 78.00 72.00 Galvanized Sub-Panel Installed SCE-72XM6618G 72.00 65.75 18.00 IS,220.1 SCE-64P64GALV** 60.00 60.00 ** Sub-panel included with enclosure. Replacement sub-panels can be ordered. Prices found in the accessory section. SCE-76P76GALV** 72.00 72.00 Heavy Duty Enclosures For Flange-Mounted Designed to house electrical equpment and provide protection from dirt, dust, oil and water and to house most standard type disconnects. For installation information, consult our Installation Manual at www. saginawcontrol. 0.125 carbon steel. Flange trough collar around all sides of door opening. Body stiffeners in large enclosures for extra rigidity. Heavy duty lifting eyes anchor into reinforced top. Removable center posts permit easy sub-panel installation. handle on main door with black zinc die cast padlocking handle on slave doors. -point latching mechanism. Ends of latch rods have ramp shoes for easier door closing. Removable sub-panels mount on collar studs. Master door is far right-hand door on all enclosures. Mechanical interlock activated by master door prevents slave doors from being opened first. Doors can be closed in any order. Disconnect switch (or circuit breaker) and operating mechanism are not furnished with enclosure. ANSI-61 gray powder coated inside and out. Sub-panels are powder coated white. IS - Industry Standards - NEMA Type R, 12 & Type 1 UL Listed Type R & 12 CSA Type R & 12 NEMA Type R, 4, 12 & Type 1 UL Listed Type R, 4 & 12 CSA Type R, 4 & 12 IEC 6052 IP 66 ***Special Instructions apply for IS, IS4 and IS6 to maintain the environmental rating of Type R for these parts. See the Special Instructions on the Industry Standards page in the Technical Information Section.
26 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 27 GENERAL Drip Shield Kit For Type 12 & 4 Enclosures Protects door against dripping water and settling dust. Stainless steel screws and sealing washers are supplied with each kit. Made of steel and powder coated ANSI-61 gray. Catalog Fits Enclosure Product List No. Width (B) Code Price SCE-DS12N4 12.00 P2 5.8 SCE-DS16N4 16.00 P2 40.80 SCE-DS20N4 20.00 P2 4.28 SCE-DS24N4 24.00 P2 50.74 SCE-DS0N4 0.00 P2 5.22 SCE-DS6N4 6.00 P2 56.40 SCE-DS42N4 42.00 P2 60.1 SCE-DS48N4 48.00 P2 68.82 SCE-DS60N4 60.00 P2 80.17 SCE-DS72N4 72.00 P2 0.4 No. Height Width Code Price SCE-FS1212 12.00 12.00 P2 146.5 SCE-FS1818 18.00 18.00 P2 18.7 SCE-FS2424 24.00 24.00 1.75 P2 221.04 Stainless Steel SCE-FS1212SS 12.00 12.00 P2 418.00 SCE-FS1818SS 18.00 18.00 P2 476.22 SCE-FS2424SS 24.00 24.00 P2 46.72 GENERAL Folding Shelf Folding shelves can be installed on the inside or outside of large enclosures. They are designed to support test equipment and programmers. Locks in the horizontal position. When not in use, shelf can be folded down. Made of heavy gauge steel and powder coated white. SS parts are stainless steel Type 04 with #4 brush finish. Stainless Steel Drip Shield Kit For Type 4X Enclosures Protects door against dripping water and settling dust. Furnished with stainless steel screws and sealing washers. Kit made of stainless steel Type 04. Catalog Fits Enclosure Product List No. Width (B) Code Price SCE-DS12SS 12.00 P2 81.6 SCE-DS16SS 16.00 P2 8.41 SCE-DS20SS 20.00 P2 6.86 SCE-DS24SS 24.00 P2 104.1 SCE-DS0SS 0.00 P2 116.72 SCE-DS6SS 6.00 P2 12.14 SCE-DS42SS 42.00 P2 141.56 SCE-DS48SS 48.00 P2 158.5 SCE-DS60SS 60.00 P2 181.1 SCE-DS72SS 72.00 P2 216.07 No. Description Depth Width Code Price SCE-18SBASE Pedestal Base 18.00 18.00 P2 111.76 SCE-24SBASE Pedestal Base 24.00 24.00 P2 25.2 SCE-44CCOL Straight Column 4.00 4.00 P2 18.7 SCE-44PBCOL Angled Column 4.00 4.00 P2 218.56 SCE-66CCOL Straight Column 6.00 6.00 P2 275.68 SCE-66PBCOL 4.1 Angled Column 6.00 6.00 P2 27.8 Stainless Steel SCE-18SBASESS Pedestal Base, Stainless Steel 18.00 18.00 P2 424.6 SCE-24SBASESS Pedestal Base, Stainless Steel 24.00 24.00 P2 451.45 SCE-44CCOLSS Straight Column, Stainless Steel 4.00 4.00 P2 524.1 SCE-66CCOLSS Straight Column, Stainless Steel 6.00 6.00 P2 554.52 Accessory Columns and Bases Designed to allow enclosures to be floor mounted. Columns can be mounted to either size base. Columns have flanges at each end and a gasketed access plate. Bases are to be bolted to the floor. Gasket and mounting hardware included. For technical information, consult the Installation Manual at www.saginawcontrol. Pedestals and bases are ANSI-61 gray powder coated. SS parts are stainless steel Type 04 with #4 brush finish. General Accessories General Accessories Accessories
00 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST 01 GENERAL Disconnect Adapter Kit Designed to convert a SCE - (U) style enclosure to a (V) style. Will accept the following: Allen-Bradley 144V; Culter- Hammer C61/C71; General Electric Type TDA; ITE Max-Flex FHOH; Square D Class 422. For Installation information consult our Made of heavy gauge steel and powder coated ANSI-61 gray. No. Description Code Price SCE-UA400V U Style to 400 Amp Style P2 47.1 SCE-UAV U Style to V Style P2 47.1 No. For Use With Code Price SCE-NMST6 6 Inch Wide NEMA 1 Enclosure P2 15.8 SCE-NMST8 8 Inch Wide NEMA 1 Enclosure P2 17.04 SCE-NMST10 10 Inch Wide NEMA 1 Enclosure P2 18.10 SCE-NMST12 12 Inch Wide NEMA 1 Enclosure P2 1.17 SCE-NMST16 16 Inch Wide NEMA 1 Enclosure P2 21.0 SCE-NMST20 20 Inch Wide NEMA 1 Enclosure P2 2.42 SCE-NMST24 24 Inch Wide NEMA 1 Enclosure P2 25.56 MOUNTING OPTIONS Type 1 Mounting Straps Designed to install on wall-mount Type 1 enclosures. Two mounting straps per kit. Made of heavy gauge carbon steel, powder coated ANSI-61 gray. Hardware is included to fasten mounting strap kit to the enclosure. Blank Disconnect Cover Plate Designed to cover disconnect cutouts in the flange of the enclosure and has an oil-resistant gasket to seal against oil, dust, dirt, and water. Made of heavy gauge steel and powder coated ANSI-61 gray. Stainless plate is made of Type 04 stainless with #4 brushed finish. No. Description Code Price SCE-ABDCP Carbon Steel for Allen-Bradley F/D Cutout SCE-DCP Carbon Steel for Standard SCE Cutout SCE-DCPSS Stainless Steel for Standard SCE Cutout P2 5.40 washer to maintain Environmental Rating of the enclosure. Mechanical Interlock Designed for use with Enviroline two-door enclosures to interlock the master door to the slave door. No. Description Per Kit Code Price SCE-10441 Interlock for Left Door as Main 1 P2 14.1 SCE-105604 Interlock for Right Door as Main 1 P2 14.1 No. For Use With Code Price SCE-MST4 4 Inch Wide R Enclosure P2 17.04 SCE-MST6 6 Inch Wide R Enclosure P2 18.10 SCE-MST8 8 Inch Wide R Enclosure P2 1.17 SCE-MST10 10 Inch Wide R Enclosure P2 20.24 SCE-MST12 12 Inch Wide R Enclosure P2 21.0 SCE-MST16 16 Inch Wide R Enclosure P2 2.42 SCE-MST20 20 Inch Wide R Enclosure P2 25.56 Type R Mounting Straps Designed to install on wall-mount Type R enclosures. Two mounting straps per kit. Made of heavy gauge carbon steel, powder coated ANSI-61 gray. Hardware is included to fasten mounting strap kit to the enclosure. For installation information, consult our Installation Manual at www. saginawcontrol. General Accessories Electrical Interlock Designed to provide a safety lockout on an enclosure when the circuits are energized. UL recognized. Works with SCE hardware. Electrical Interlock Defeater Designed to provide a key operated momentary contact switch with the contacts normally closed. Turning the key disengages the circuit to the electrical interlock, allowing access to the enclosure. May be used with SCE-E1151 Electrical Interlock. 4 amp, 125 vac. SCE-10441 SCE-105604 No. AMPS Hz Volt Code Price SCE-E115I.100 /.6 50/60 115 P2 144.68 No. AMPS Hz Volt Code Price SCE-EKDF 10 60 120 P2 6.21 Accessories SCE-MST24 24 Inch Wide R Enclosure P2 27.6 No. For Use With Code Price SCE-VRMS24 24 Inch Wide Vented R Enclosure P2 42.67 SCE-VRMS6 6 Inch Wide Vented R Enclosure P2 5.21 Mounting Straps For Vented R Enclosures Designed to install on wall-mount Vented R enclosures. Two mounting straps per kit. Made of heavy gauge carbon steel, powder coated white. Hardware is included to fasten mounting strap kit to the enclosure. Mounting Options