geass.com Environmental simulation chambers for cyclic temperature testing MK MKT series The MK and MKT series master all heating and cooling tests between -7 C and 1 C. They distinguish themselves through precision and performance. The APT.line TM preheating chamber technology ensures natural simulation and thus reliable test results. 3* 1 2 72 MKT 2 model Available sizes (liters) EQUIPMENT - Temperature range of - C to 1 C (MK) and -7 C to 1 C (MKT) - MCS controller with storable programs of 1 sections each for a maximum of program segments - User friendly LCD screen - Easy-to-read menu guide - Integrated electronic chart recorder - Variety of options for the graphic display of process parameters - Real time clock - Programmable condensation protection for test material - 23 V power socket on the right-side operating panel (except MK 3) - Adjustable ramp function via program editor - Access port Ø mm top (MK 3), Ø mm, left side (MK 1, 2), 2 access ports Ø mm, right and left side (MK 72) - Temperature safety device class 2 (DIN 128) with visual and acoustic temperature alarm - Heated viewing window with LED interior lighting - Ethernet for GLP/GMP and FDA guideline 21 CFR Part 11 compliant APT-COM DataControlSystem software - Stainless steel rack included - 4 castors (2 with brakes) (except MK 3) 64 Made in Germany Distributore Autorizzato : Geass S.r.l. - Via Ambrosini 8/2, 11 Torino (Italia) - Tel. +39 11.22.91.78 - eb site : www.geass.com
MK MKT SERIES BEST TEST CONDITIONS: Homogeneous climate conditions APT.line for uniform circulation even under full load Same test conditions throughout the chamber interior Independent of specimen size and quantity Comprehensive product portfolio BINDER Data Logger Kits Years of proven and recognized validation and documentation materials Customized solutions ell equipped Heated viewing window Rugged chassis with castors from 1 liters Ethernet interface Documentation Software APT-COM TM Convenient assembly and operation Large access area Controls accessible from the front Optimum use of space OPTIONS - Notch-type access port in the door, 1 x mm - Data Logger Kits and software - Shelf, stainless steel - Perforated shelf, stainless steel - Reinforced shelf, stainless steel - Locking of controller keyboard - Lockable door - Safety device for over and under temperature (DIN 128) - Analog outputs 4 to 2 ma with DIN bushing 6 poles - Additional measuring channel for specimen temperature display - Qualifi cation folder - Calibration certifi cate - Extension for calibration certifi cate Reinforced shelves Notch-type access port in door BINDER INDIVIDUAL More information from page 9 Various access ports MK with door openings for manual access during test conditions
Technical data for your planning and installation MK series HEATING UP AND COOLING DON RATE Exterior dimensions MK 3 MK 1 MK 2 MK 72 idth (mm) 7 1 11 16 Height (including feet/castors) (mm) 12 17 17 Deph (including door handle, I-panel and exhaust duct) (mm) 79 9 1 123 Interior dimensions idth (mm) 6 7 12 Height (mm) 4 7 12 Depth (mm) 33 4 6 Interior volume (l) 3 1 228 734 Quantity of racks (standard/max.) 1 / 1 / 4 1 / 6 1 / 11 Load per rack (kg) 3 3 Permitted total load (kg) 6 7 16 eight (empty) (kg) 26 3 7 Temperature data Temperature range ( C) 1) - 1-1 - 1-1 Temperature uniformity (± K) 2).4 2..1 2..1 1.2.3 2. Temperature fl uctuation (± K) 2).1..1..1..1. Mean heating-up rate from - C to 1 C 4.6.3. 4. Mean cooling rate from 1 C to - C 4.1. 4. 4. Max. heat compensation (k). 2. 2. 6. Electrical data Housing protection acc. to EN 629 IP 2 IP 2 IP 2 IP 2 Nominal voltage (±1%) Hz (V) 23 1 N ~ 3 N ~ 3 N ~ 3 N ~ Nominal power (k) 2.6 3. 4.2 7.2 Energy consumption at 2 C (k) 3) 1.2.6 1.3 1.9 Noise level (ca. db(a)) 9 62 62 6 Model no. 92-6 92-17 92-181 92-197 2 16 12 1 16 1 12 1 6 2-2 - - - 2 16 12 - - 1 1 2 3 2 MK 3 3 6 7 MK 3 E 2.1 9 1 HEAT COMPENSATION MK 3 E 2.1 11 6 12 MK 3 E 2.1 17 1 1 7 DIMENSIONS 1) Lower values are valid up to an ambient temperature of max. C / 77 F // 2) depending on the set point. // 3) Use this value for dimensioning air conditioning systems. /// The temperature data are determinated in accordance with factory standard following DIN 128 respecting the recommended wall clearances of 1 % of the height, width and depth of the inner chamber. All values have 7 79 been specified at a fan speed of 1%. All indications are average values, typical for units produced in series. e reserve the right to change technical specifications at any time. 12 Made in Germany
HEATING UP AND COOLING DON RATE MK 1 MK 2 MK 72 3 2 1 2 2 2 16 16 16 12 12 12 MK 1 - - 6 3 2 1 2 16 12 MK 1 - - MK 72 - - 7 6 3 2 1 1 13 12 11 1 9 7 6 3 2 1 MK 2 - - 6 2 2 16 16 12 12 MK 2 MK 72 - - - - 12 11 1 9 7 6 3 2 1 1 9 7 6 3 2 1 HEAT COMPENSATION 6 6 3 3 3 2 2 2 1 1-1 -2 MK 1 1-1 -2 MK 2-1 -2-3 MK 72-3 -3 - - - - - 7 1 1 17 2 2 27 3 3-7 1 1 17 2 2 27 3 3 1 2 3 6 6 7 7 DIMENSIONS 1 9 11 1 16 123 17 17
Technical data for your planning and installation MKT series Exterior dimensions MKT 1 MKT 2 MKT 72 idth (mm) 1 11 16 Height (including feet/castors) (mm) 17 19 Deph (including door handle, I-panel and exhaust duct) (mm) 9 1 123 Interior dimensions idth (mm) 6 7 12 Height (mm) 4 7 12 Depth (mm) 4 6 Interior volume (l) 1 228 734 Quantity of racks (standard/max.) 1 / 4 1 / 6 1 / 11 Load per rack (kg) 3 3 Permitted total load (kg) 6 7 16 eight (empty) (kg) 3 61 EXCERPT FROM FULFILLED STANDARDS DIN EN 668-2-2:28- DIN EN 668-2-14:21-9 DIN EN 668-3-:22-12 DIN EN 612:26-2, 1.11 DIN EN 61646:29-3, 1.11 For standards with description, see page 4. Temperature data Temperature range ( C) 1) -7 1-7 1-7 1 Temperature uniformity (± K) 2).2 1.8.1 1..3 2. Temperature fl uctuation (± K) 2).1.6.1.4.1. Mean heating-up rate from - C to 1 C.3. 4. Mean cooling rate from 1 C to - C 4.2 4.2 4.2 Max. heat compensation (k) 1.8 3.. Electrical data Housing protection acc. to EN 629 IP 2 IP 2 IP 2 Nominal voltage (±1%) Hz (V) 3 N ~ 3 N ~ 3 N ~ Nominal power (k). 6. 13. Energy consumption at 2 C (k) 1).8 1.4 2.2 Noise level (ca. db(a)) 64 64 6 Model no. 92-1 92-196 92-82 1) Lower values are valid up to an ambient temperature of max. C / 77 F // 2) depending on the set point. /// All technical data are specified for units with standard equipment at an ambient temperature of C and a voltage fluctuation of ±1 %. The temperature data are determinated in accordance with factory standard following DIN 128 respecting the recommended wall clearances of 1 % of the height, width and depth of the inner chamber. All values have been specified at a fan speed of 1%. All indications are average values, typical for units produced in series. e reserve the right to change technical specifications at any time. Made in Germany
HEATING UP AND COOLING DON RATE MKT 1 MKT 2 MKT 72 2 16 12 MKT 1 - - 3 2 1 3 2 1 2 16 12 - - MKT 1 2 2 16 16 12 12 MKT 2 MKT 72 - - - - 1 9 7 6 3 2 1 2 2 16 16 12 12 - - MKT 2 - - MKT 72 1 9 7 6 3 2 1 1 9 7 6 3 2 1 1 9 7 6 3 2 1 HEAT COMPENSATION 3 3 3 2 2 2 1 1 1-1 -2 MKT 1-1 -2 MKT 2-1 -2 MKT 72-3 -3-3 - - - - - - -6-6 -6-7 -7-7 6 6 3 2 1 37 3 3 27 2 2 17 1 1 7 3 3 27 2 2 17 1 1 7 DIMENSIONS 1 9 11 1 16 123 17 19 Distributore Autorizzato : Geass S.r.l. - Via Ambrosini 8/2, 11 Torino (Italia) - Tel. +39 11.22.91.78 - eb site : www.geass.com