WELCOME TO LIGHT BROKERS TO SUIT ANY APPLICATION AND BUDGET.

LIGHTING CATALOGUE

INTRODUCTION LIGHT BROKERS HAS PROVIDED LIGHTING SOLUTIONS ALL OVER AUSTRALIA FOR OVER 20 YEARS. OFFERING CONSULTATION, LIGHTING DESIGN AND A WIDE RANGE OF PRODUCTS WELCOME TO LIGHT BROKERS TO SUIT ANY APPLICATION AND BUDGET. DISCLAIMER All technical data and specifi cations within this catalogue are subject to change without prior notifi cation or public announcement. They are to be used as a guide only and errors and omissions are excepted. Light Brokers Pty Ltd constantly improves or adjusts its range of luminaires, therefore it is essential that important data such as cutout sizes for ceiling holes are to be confi rmed before proceeding with any cutting or construction, as sizes may change without notice. All care has been taken to ensure that the information in this catalogue is correct at the time of publication, and in keeping with Light Broker s policy of constant improvement, products supplied may differ in some detail to those illustrated in this catalogue. Therefore this catalogue shall not form a part of any contract. All products are supplied subject to standard terms and conditions of Light Brokers Pty. Ltd. The LED luminaires are conditionally guaranteed for three years provided the equipment is installed to the satisfaction of Light Brokers, and the relevant authorities. Light Brokers will make any necessary replacements of faulty products during their guarantee period, without charge and upon return of the goods to Light Brokers. We reserve the right to use our own maintenance facilities for rectifi cation and claims for charges by other parties will not be accepted. All lighting designs appearing in this catalogue remain the property of Light Brokers Pty. Ltd. Light Brokers is a registered trademark. PLEASE NOTE: Designs and technologies within this catalogue are covered by patent rights. Lamps are not included with the catalogued luminaires, unless specified, and should be ordered separately. INTRODUCTION 1

INTRODUCTION LED TECHNOLOGY THE COMPARISON TABLE* TYPICAL HALOGEN LAMP 35W = 500-600 Lumens 50W = 700-900 Lumens 100W = 1400-1800 Lumens LIGHT BROKERS LED 3000K CRI85 8W = Equal Performance 13W = Better Performance 28W = Better Performance * Others may compare high colour temperatures as a halogen equivalent. This is not a fair comparison as higher colour temperatures usually have more output. LIGHT EMITTING DIODES LIGHT EMITTING DIODES LED are not a new form of light source, they have been used for many years as indicator lights, on electrical appliances and on many other products and devices that we can all recall. It is only in the last few years that LED s have been developed further so that they can be used for alternatives to traditional lighting. Due to energy saving requirements and higher costs in power and maintenance, we researched and developed a range of LED lighting products that are superior in performance to other available products. We have developed our own technologies, customised diode arrays and leading thermal management processes that has given us patent recognition. Our range of Australian designed and made LED products have proven time and time again that not all LED luminaires are the same. The list of high profile clients around Australia and overseas is growing and our clients have constantly commented on the efficiency and performance of our products. Imitation is the greatest form of flattery, but we are always a step ahead of the rest! TECHNOLOGY The development of our LED technology has produced a wide range of LED fixtures that can perform to its highest level possible from what we can extract from technology. There are a number of core components that must be of the highest available quality to conform to our best practice. For example the LED dies are Japanese made with phosphor coatings that yield long life with no visible colour shift over time. We have standardised on one tight customized colour bin for each colour temperature so our customers can enjoy an environment of consistent colour. Our optical design delivers high light output that is well known around the world. Thermal management design is paramount if you want your LED to last. No short cuts can be taken here. We are meticulous with our designs and materials ensuring long-life and durability to withstand the harsh Australian climate. Our range of LED fixtures are designed and built in Australia and come with a three year warranty. 2

LIGHTING DESIGN & SIMULATION INTRODUCTION LIGHTING DESIGN & SIMULATION S A 1 A A A 1 1 1 A 1 A A 1 1 A1 A 1 A1 10 00 08 661 625 11 12 24 1033 3A1 796 1024 11008 25 11 4 845 13 394 125 56 99393 1196 13 30 08 115 152 900 0 62 29 954 94 47 135 52 11 163 1103 1 974 1070 0 1309 113613 11 18 89 96 68 1058 1008 11 166 6 1314 14 1077 955 5 903 A 1 A 1 3 93 32 A A1 A 1 1 913 104 2 1215 15 913 906 104 44 4 125 53 A1 1034 736 109 95 91 14 810 97 74 796 LIGHTING DESIGN is achieved using the world renowned AGI32 a decade of inhouse experience allows us to accurately simulate lighting environments and recommend the most suitable luminaire. Lux levels can be shown at any point, particularly on the horizontal and vertical planes. Vertical illumination is very important in retail environments. Our lighting designs will show you the Lighting Power Density (watts per m²) in an area in order to be compliant to sections of the building code and AS1680. IES photometric files are available for our range of LED luminaires. 3

LEGEND PHOTOMETRY DATA IP RATING / TECHNICAL & SAFETY CLASSIFICATIONS COLOUR CODE SUFFIX (code-xx) First digit Second digit Penetration of solid objects Penetration of water Satin white 0 1 No protection greater than dia 50mm 0 1 No protection dripping water Texture white 2 greater than dia 12mm 2 dripping water when tilted 15Þ Satin black 3 greater than dia 2.5mm 3 rain water Texture black 4 5 greater than dia 1.0mm air borne dust 4 5 splashing water water jets Grey 6 dust tight 6 heavy seas Bright silver 7 water tight Texture silver 8 m submersion Anodised silver angle of adjustable tilt circular hole size for installation Pearlescent silver angle of adjustable rotation rectangular hole size for installation Polished chrome ALL DIMENSIONS SHOWN IN THIS CATALOGUE ARE IN MILLIMETRES. In compliance with European IEC529 and Australian Standard AS1939-1991 UV filter glass supplied with luminaire Class I provided with an earth connection Class II double insulated - no earth connection Class III safe extra low voltage supply Brushed chrome Matt chrome Brushed stainless steel Polished stainless steel Brushed aluminium Polished aluminium Suitable for mounting on normally flammable surface Polished & satin chrome Signifies that a product conforms with the requirements of EEC directives RUST Manufactured from materials that will not rust PHOTOMETRIC DATA ELEMENTS OF PHOTOMETRIC DIAGRAMS Scale of luminous intensity Polar distribution curve of luminous intensity C0 - C180 transverse plane A difference in these cones ndicates an asymmetrical output 250 60 C90 - C270 Longitudinal plane Lamp icon 375 500 cd / Klm 30 2x30 150w HQI-TS Lamp power and type h Lux dia. Beam conical angle 1 4056 1.1 2 1014 2.1 3 451 3.3 Distance to luminaire 4 5 253 4.6 162 5.9 Approximate area of beam falling on to a horizontal plane Average lux levels on the horizontal plane based on 1/2 of maximum intensity 1/2 beam conical angle

CONTENTS LED RANGE DRIVERS & CONTROL GEAR 07 45 46 47 METAL HALIDE 61 PENDANTS 49 63 65 12V DOWNLIGHTS & SPOTLIGHTS FLUORESCENT 67 79 81 85 TRACK LIGHTS EXTERIOR LIGHTING 95 111

VERONIKA MAINE - WESTFIELD LIVERPOOL NSW

LED RANGE 07 45

LED RANGE IP44 SELV Recessed downlight with ultra bright LED, with plenty of punch and different beam angle options. This fitting is a true alternative to Dichroic Halogen Lamps. Excellent thermal characteristic for non-airconditioned ceilings up to 60 C Recessed LED downlight with different beam angle options, tilt adjustable and rotatable with low light clipping. Ultra bright 13W version available, more than enough to use as alternative to dichroic. Ambient temperature rating up to 60 C Recessed LED downlight designed to visually integrate within planar ceilings whilst providing low glare illumination. Conical housing with minimal trim width and thickness. Powdercoat paint finish. 71094 71095 71007 88 90 110 100 MIN. MOUNTING DEPTH REQUIRED 105MM MIN. MOUNTING DEPTH REQUIRED 120MM SUITABLE FOR CEILING THICKNESS UP TO 40MM THIS MODEL ALSO AVAILABLE IN 18W 90 Chrome Brushed Chrome 355 35 90 Black Chrome Brushed Chrome 25 75 Black CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Clear tempered glass Comfort low glare output Max.15% lumen depreciation after 40,000 hrs Die-cast construction in aluminium alloy Power factor > 0.9 Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-VWFL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-VWFL-4K-13W Code-SP-5K-13W Code-FL-5K-13W Code-VWFL-5K-13W 36 36 36 2800K 2800K 4000K 4000K 5000K 5000K 8W 8W 8W 8W 8W 8W Total system power consumption for 8W=10W. 36 55 36 55 36 55 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W=14.8W. PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. 600 600 630 630 650 650 1000 1000 1000 1050 1050 1050 1350 1350 1350 8 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP20 SELV Single or multiple downlights with independent adjustment. High output energy efficient LED downlight. Tilt adjustable and rotatable with low light clipping. Can operate in very high ambient temperatures of up to 60 C 71057 71057-2 71057-3 120 120 120 1 LED 118 2 LED 118 3 LED 118 118 225 325 INTERNAL HOUSING IS ALWAYS BLACK INTERNAL HOUSING IS ALWAYS BLACK INTERNAL HOUSING IS ALWAYS BLACK 355 35 108x100 355 35 108x208 355 35 108x310 CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS (PER ONE LED) 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Comfort low glare output Installation springs suitable for ceiling thickness up to 20mm Tilt adjustable and rotatable Supplied with compatible mains remote, leading and trailing edge LED driver with power cord and moulded plug top Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-VWFL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-VWFL-4K-13W Code-SP-5K-13W Code-FL-5K-13W Code-VWFL-5K-13W 36 36 36 2800K 2800K 4000K 4000K 5000K 5000K 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =10W. 36 55 36 55 36 55 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =14.8W. PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. 600 600 630 630 650 650 1000 1000 1000 1050 1050 1050 1350 1350 1350 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 9

LED RANGE IP65 SELV Recessed square fixed LED downlight with high output optical design system. Compact LED Downlight with wet area protection. High output optical design system. Recessed square aluminium die-cast bezel LED Downlight. Wet area protection and high output optical design system. 71056 71055 71066 120 75 75 118 85 85 108x100 70 Black Brushed 70 Brushed Chrome Chrome 13W or 8W Japanese LED Module 50,000 + hour lifespan CEILING RING TO BE FITTED INTO CEILING HOLE FIRST CEILING RING TO BE FITTED INTO CEILING HOLE FIRST Super efficient optical control Comfort low glare output Clear tempered glass with double silicone gaskets Totally sealed unit with cable gland fitted for IP65 protection Supplied with double silicone gasket ceiling ring Die-cast construction in aluminium alloy Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top 8W is similar output to a 35W MR16 halogen lamp 9.5W or 13.5W total system power consumption Power Factor > 0.9 Max. 15% lumen depreciation after 40,000hrs CODE Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-SP-5K-13W Code-FL-5K-13W BEAM ANGLE 36 36 36 COLOUR TEMPERATURE 3000K 3000K 4000K 4000K 5000K 5000K WATTAGE 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =10W. 36 36 36 3000K 3000K 4000K 4000K 5000K 5000K 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =14.8W. LUMENS 600 600 630 630 650 650 1000 1000 1050 1050 1350 1350 PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. 10 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP20 SELV High output energy efficient LED downlight. Unique Square trim adjustable downlight requiring a round ceiling cut out. Deep recessed black baffle LED downlight. Tilt adjustable and ultra low glare. Super bright 13W version available, a true alternative to dichroic. Die-cast construction in aluminium alloy. 71077 71008 100 102 100 96 MIN. MOUNTING DEPTH REQUIRED 110MM 90 82 20 Polished Brushed Chrome Chrome 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Comfort low glare output Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top CODE Code-SP-3K-8W Code-FL-3K-8W Code-SP-4K-8W Code-FL-4K-8W Code-SP-5K-8W Code-FL-5K-8W Code-SP-3K-13W Code-FL-3K-13W Code-VWFL-3K-13W Code-SP-4K-13W Code-FL-4K-13W Code-VWFL-4K-13W Code-SP-5K-13W Code-FL-5K-13W Code-VWFL-5K-13W BEAM ANGLE 36 36 36 COLOUR TEMPERATURE 3000K 3000K 4000K 4000K 5000K 5000K WATTAGE 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =10W. 36 55 36 55 36 55 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =14.8W. LUMENS (PER ONE LED) 600 600 630 630 650 650 950 950 950 1000 1000 1000 1350 1350 1350 PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 11

LED RANGE IP54 SELV Recessed LED Downlight with deep specular reflector and clear tempered glass Recessed LED Downlight with frost polycarbonate cover for diffused wide light distribution 71195 71196 95 95 135 135 124 124 13W Japanese LED module Comfort low glare output Installation springs suitable for ceiling thickness of 30mm Manufactured from diecast aluminium alloy with polyester powdercoat finish Silicone gasket to seal against ceiling Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top Power factor > 0.9 50,000+ hours lifespan CODE Code-3K Code-4K BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS WIDE 3000K 13W 950 WIDE 4000K 13W 1000 Total system power consumption for 13W = 14.8W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. 12 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP54 SELV Recessed LED downlight with deep specular reflector and clear tempered glass Recessed LED downlight with frost polycarbonate cover for diffused wide light distribution. 71193 71194 95 95 165 165 155 155 22W Japanese LED module Comfort low glare output Installation springs suitable for ceiling thickness of 30mm CODE Code-3K Code-4K BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS WIDE 3000K 22W 1800 WIDE 4000K 22W 1900 Manufactured from diecast aluminium alloy with polyester powdercoat finish Silicone gasket to seal against ceiling Supplied completely assembled with remote dimmable driver with power cord and moulded plug top Power factor > 0.9 50,000+ hours lifespan Total system power consumption for 22W = 25W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 13

LED RANGE IP65 SELV Round recessed LED downlight with very high lumen output due to brilliant optical control. Designed to visually integrate within planar ceilings. Frost polycarbonate cover for soft wide beam distribution. 71192 92 125 110 13W or 18W Japanese LED module Soft wide beam distribution Comfort low glare output Installation springs suitable for ceiling thickness of up to 20mm CODE 71192-3K-13W 71192-4K-13W BEAM ANGLE COLOUR TEMPERATURE WATTAGE WIDE 3000K 13W 1000 WIDE 4000K 13W 1050 Total system power consumption for 13W = 13.5W LUMENS Manufactured from die-cast aluminium alloy with polyester powdercoat finish Silicone gasket to seal against the ceiling Totally sealed unit with cable gland fitted for IP65 protection Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top Power factor > 0.9 50,000+ hours lifespan Maximum 15% lumen depreciation after 40,000 hours 71192-3K-18W 71192-4K-18W WIDE 3000K 18W 1750 WIDE 4000K 18W 1900 Total system power consumption for 18W = 20W 14 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DSI Digital dimming (13W ONLY) /DALI Dimming (13W ONLY) IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP44 SELV Square recessed LED downlight with frost polycarbonate cover for diffused wide light distribution. 71199 55 140 140 125x125 8W and 13W Japanese LED module Comfort low glare output Installation springs suitable for ceiling thickness of 30mm Manufactured from diecast aluminium alloy with polyester powdercoat finish Very low profile for shallow ceiling spaces Supplied completely assembled with remote leading and trailing edge dimmable driver with power cord and moulded plug top Power factor > 0.9 50,000+ hours lifespan CODE 71199-3K-8W 71199-4K-8W 71199-3K-13W 71199-4K-13W BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS WIDE 3000K 8W 670 WIDE 4000K 8W 730 Total system power consumption for 8W =10W WIDE 3000K 13W 950 WIDE 4000K 13W 1000 Total system power consumption for 13W = 13.5W SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST 15

LED RANGE IP10 Surface mounted LED downlight with an integral driver. Aluminium profile with a multi-directional tilting mechanism. Ideal where a remote driver is not practical or a ceiling cavity does not exist. 71102 110 140 110 DUAL AXIS TILTING INTERNAL HOUSING IS ALWAYS BLACK PLEASE NOMINATE YOUR CHOICE OF TRIM COLOUR 25 x 25 ON TWO PLANES Black Brushed Aluminium CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 13W or 8W Japanese LED Module 50,000+ hour lifespan Super efficient optical control Comfort low glare output Aluminium and die-cast alloy construction Supplied completely assembled with integral 240V leading and trailing edge dimmable driver Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 71102-SP-3K-8W 71102-FL-3K-8W 71102-SP-4K-8W 71102-FL-4K-8W 71102-SP-5K-8W 71102-FL-5K-8W 71102-SP-3K-13W 71102-FL-3K-13W 71102-VWFL-3K-13W 71102-SP-4K-13W 71102-FL-4K-13W 71102-VWFL-4K-13W 71102-SP-5K-13W 71102-FL-5K-13W 71102-VWFL-5K-13W 36 36 36 36 55 36 55 36 55 3000K 3000K 4000K 4000K 5000K 5000K 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 8W 8W 8W 8W 8W 8W Total system power consumption for 8W =9.5W. 13W 13W 13W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =13.5W. 600 600 630 630 650 650 1000 1000 1000 1050 1050 1050 1350 1350 1350 16 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST

EYECARE KIDS OPTOMETRIST - NSW AUSTRALIA 17

SEAFOLLY - CASTLE HILL NSW AUSTRALIA 18

LED RANGE IP20 SELV A brilliant optically controlled LED downlight widely used in shopping centres and retail outlets as an alternative to Metal Halide, available in adjustable or fixed version in two trim diameter. 71088 71090 165 165 173 190 164 35 Black 180 35 Black MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: 1.312 KGS MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: 1.475 KGS 28W Japanese LED Module 30W total system power consumption, 36 or 47 Beam with no harsh cutoff and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Quick connect driver is IP64 Die-cast aluminium alloy body Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Clear tempered glass NOTE: TRIM RINGS ARE AVAILABLE TO COVER LARGER CEILING HOLES. CODE Code-SP-3K Code-FL-3K Code-WFL-3K Code-SP-4K Code-FL-4K Code-WFL-4K Code-SP-5K Code-FL-5K Code-WFL-5K EASILY CONNECTS BEAM ANGLE 36 47 36 47 36 47 COLOUR TEMPERATURE 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K Total system power consumption for 28W =30W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. IP64 QUICK CONNECT 30W DRIVER WATTAGE 28W 28W 28W 28W 28W 28W 28W 28W 28W LUMENS 2340 2340 2340 2470 2470 2470 2360 2360 2360 AVAILABLE AS FIXED OR ADJUSTABLE FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Trailing edge mains dimmable /DSI Digital dimming /DALI Dimming FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /AD1 For 1 way adjustable to 35 /FX For fi xed IES FILES ARE AVAILABLE UPON REQUEST 19

LED RANGE IP20 SELV A brilliant optically controlled LED downlight for applications in shopping centres and retail outlets as an alternative to metal halide, but with advantages of no heat output, less power consumption and long life without maintenance. 71089 71091 150 150 173 190 MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: 1.471 KGS 164 25 MIN. MOUNTING DEPTH REQUIRED: 200MM TOTAL WEIGHT: 1.570KGS 180 25 Black Black 45W and 60W Japanese LED Module or 47 Beam with no harsh cutoff and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied with remote 240V electronic control gear and quick connect harness Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Quick connect driver (see picture below) Supplied with a single 60W driver is IP64 to protect the electronics from humidity, wet environments and moisture in air conditioned areas Die-cast aluminium alloy body Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Light weight for plaster ceiling NOTE: TRIM RINGS ARE AVAILABLE TO COVER LARGER CEILING HOLES. CODE Code-SP-3K-45W Code-WFL-3K-45W Code-SP-4K-45W Code-WFL-4K-45W Code-SP-5K-45W Code-WFL-5K-45W Code-SP-3K-60W Code-WFL-3K-60W Code-SP-4K-60W Code-WFL-4K-60W Code-SP-5K-60W Code-WFL-5K-60W BEAM ANGLE 47 47 47 COLOUR TEMPERATURE 3000K 3000K 4000K 4000K 5000K 5000K WATTAGE 45W 45W 45W 45W 45W 45W Total system power consumption for 45W = 43.5W 47 47 47 3000K 3000K 4000K 4000K 5000K 5000K 60W 60W 60W 60W 60W 60W Total system power consumption for 60W = 59W EASILY CONNECTS PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. IP64 QUICK CONNECT 60W DRIVER LUMENS 3900 3900 4020 4020 4360 4360 5400 5400 5520 5520 5980 5980 AVAILABLE AS FIXED OR ADJUSTABLE 20 FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /AD1 For 1 way adjustable to 35 /FX For fi xed IES FILES ARE AVAILABLE UPON REQUEST

VODAFONE - CHATSWOOD NSW AUSTRALIA 21

LED RANGE IP20 SELV LED Recessed Adjustable Downlight utilising high efficiency optical control. Available with two popular beam angles for highlighting and spotlighting. Two way tilt adjustable for aiming flexibility., 36 or 47 Beam angle with no harsh cut-off and ultra low glare. 71080 71080-2 195 163 170x170 195 163 170x360 195 195 392 392 AVAILABLE IN 2 LIGHT AND 3 LIGHT. TRIMLESS VERSION ALSO AVAILABLE. INTERNAL HOUSING IS ALWAYS BLACK. 71080 IS ALSO AVAILABLE IN 60W. REFER TO PAGE 20 FOR LUMENS. 20 x20 Black 28W Japanese LED Module 30W total system power consumption Super efficient optical control with ultra low glare 50,000+ hour lifespan CODE Code-SP-3K Code-FL-3K Code-WFL-3K BEAM ANGLE 36 47 COLOUR TEMPERATURE 3000K 3000K 3000K WATTAGE 28W 28W 28W LUMENS 2340 2340 2340 Max.15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied with remote 240V electronic control gear and quick connect harness Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Supplied with a single IP64 driver to protect the electronics from humidity, wet environments and moisture in air conditioned areas Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Code-SP-4K Code-FL-4K Code-WFL-4K Code-SP-5K Code-FL-5K Code-WFL-5K 36 47 36 47 4000K 4000K 4000K 5000K 5000K 5000K Total system power consumption for 28W = 30W PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. EASILY CONNECTS 28W 28W 28W 28W 28W 28W IP64 2470 2470 2470 2360 2360 2360 QUICK CONNECT 30W DRIVER 22 FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Trailing edge mains dimmable /DSI Digital dimming /DALI Dimming IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP20 SELV Recessed LED downlight with very high lumen output due to the brilliant optical control maintaining ultra low glare. Ideal applications include shopping centres and retail outlets as an alternative to Metal Halide but with advantages of no heat output, less power consumption and long life without maintenance. Approx. 65 beam. Recessed LED downlight with very high lumen output due to the brilliant optical control maintaining an ultra low glare. Ideal applications in shopping centres and retail outlets as an alternative to Metal Halide but with advantages of no heat output, less power consumption and long life without maintenance. UNIQUE SQUARE DOUBLE BATWING LIGHT OUTPUT UNIQUE SQUARE DOUBLE BATWING LIGHT OUTPUT 71067 71065 150 87 120 183 100x100 Black TOTAL WEIGHT: 1.575 KGS MINIMUM MOUNTING DEPTH REQUIRED: 110MM CEILING RETENTION SYSTEM FOR CEILINGS UP TO 22MM 165x165 Black 28W Japanese LED Module 30W total system power consumption Unique square double batwing light output Approx. 65 beam Super efficient optical control with ultra low glare 50,000+ hour lifespan Max.15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Supplied with a single IP64 driver to protect the electronics from humidity, wet environments and moisture in air conditioned areas Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation CODE 71067-VWFL-3K 71067-VWFL-4K COLOUR TEMPERATURE WATTAGE EASILY CONNECTS IP64 QUICK CONNECT 30W DRIVER LUMENS 3000K 28W 2340 4000K 28W 2470 60W Japanese LED Module 62W total system power consumption Unique square double batwing light output Approx. 65 beam Super efficient optical control with ultra low glare 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with non-dimmable driver with power cord and moulded plug top Quick connect driver (see picture) Supplied with a single IP64 driver to protect the electronics from humidity, wet environments and moisture in air conditioned areas Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation Optional IP44 Clear glass cover CODE 71065-VWFL-3K 71065-VWFL-4K COLOUR TEMPERATURE WATTAGE EASILY CONNECTS LUMENS 3000K 60W 5400 4000K 60W 5520 IP64 QUICK CONNECT 60W DRIVER Total system power consumption for 28W = 30W Total system power consumption for 60W = 62W IES FILES ARE AVAILABLE UPON REQUEST 23

SEAFOLLY - CASTLE HILL NSW AUSTRALIA 24

LED RANGE IP44 LED adjustable wallwasher with wide beam distribution for illuminating vertical displays in retail stores. Constructed in pressure die-cast aluminium with ventilated front housing and tempered safety glass. Features a positive adjustment mechanism. 71592 145 230 60 215x125 45W LED module Constructed from pressure die-cast aluminium alloy with pre-treatment and durable polyester powdercoat paint finish, corrosion resistant. Tempered glass diffuser CODE 71592-3K 71592-4K COLOUR TEMPERATURE WATTAGE 3000K 45W 2000 4000K 45W 2550 Total system power consumption for 45W = 43.5W LUMENS Remote mains LED non-dimmable IP64 driver with power cord Power factor > 0.95 with active PFC 50,000+ hours lifespan Maximum 15% lumen depreciation after 40,000 hours of operation IES FILES ARE AVAILABLE UPON REQUEST 25

LED RANGE IP40 Recessed LED downlight with low profile housing made of pressed steel with ventilation holes in the front and back. Reflectors in high purity aluminium with satin finish for soft illumination. Recessed adjustable and swivel downlights with Hi-Power LED for optimum performance, up to 40,000 hours lifespan and savings on energy and maintenance. Main body is made of injected ultra pure aluminium machined to shape. Remote LED driver supplied with each downlight for connection to 240v mains. 25 45 45 72 80 90 65 30 Black Chrome Brushed 70 350 35 Chrome 35 Brushed 80 350 35 35 Aluminium Brushed Aluminium 71150 240V 350mA 3x1W Hi-Power LED Recessed fixed cabinet light for high power LED, low energy consumption and long life. Remote LED driver included. LED available in warm or cool white. 210 Lumens per watt. 71155 71157 240v 350 ma 3x1W Hi-Power LED 240v 350 ma 4x1W Hi-Power LED 3x1W Hi-Power LED recessed downlight with adjustable, rotational trim complete with remote 240v driver. Available in warm or cool white. 210 Lumens per watt. 4x1W Hi-Power LED recessed downlight with with adjustable, rotational trim complete with remote 240v driver. Available in warm or cool white. 280 Lumens per watt. 26 IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP20 SERIES 25 three circuit track for surface mounting or suspended applications. Can be cut to length on site without any special tools. Extruded aluminium profile Powdercoat paint Three separately switchable circuits Flat copper conductors 2.5mm2 Pre punched holes for direct fixing 2 holes per metre SERIES 25 TRACK 25-7024 25-7079 32 32 68 36 44 240v 16A Live end with left hand earth contact. Can be made right hand on site. 105 105 240v 16A L coupler can be used for feed. 240v 16A : 36 Black: : V D E 25-7035 End cap with locking screw. 25-7030 240v 16A T coupler can be used for feed. 25-7101 25-7105 25-7110 1000mm 25-7201 25-7205 25-7210 2000mm 25-7301 1200 25-7305 Suspension components 25-7310 25-7906 Rod 1200mm 25-7318 2mm Stainless Steel Wire 2000mm Long Gripple Loop 25-7075 Mounting clip for 7906 and 7318 36 50 25-7075 19 3000mm 25 58 25-7037 240v 16A Electrical coupler. 25-7078 240v 16A Straight coupler, can be used for feed. 172 172 25-7031 240v 16A X coupler can be used for feed. 25-7033 240v 16A Flexible coupler. Black Black IES FILES ARE AVAILABLE UPON REQUEST 27

LED RANGE IP43 Versatile LED track spotlight with fully adjustable 3-circuit track* mount for general lighting and product highlighting. 71058 180 85 155 * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 355 90 Black BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS 13W or 8W Japanese LED Module Power Factor > 0.9 71058-SP-3K-8W 71058-FL-3K-8W 36 3000K 3000K 8W 8W 600 600 Max.15% lumen depreciation after 40,000hrs 50,000+ hour lifespan Super efficient optical contol Comfort low glare output Clear tempered glass Die-cast aluminium alloy construction 71058-SP-4K-8W 71058-FL-4K-8W 71058-SP-5K-8W 71058-FL-5K-8W 71058-SP-3K-13W 71058-FL-3K-13W 71058-SP-4K-13W 71058-FL-4K-13W 71058-SP-5K-13W 71058-FL-5K-13W 36 36 36 36 36 4000K 4000K 5000K 5000K 3000K 3000K 4000K 4000K 5000K 5000K 8W 8W 8W 8W Total system power consumption for 8W =9.5W 13W 13W 13W 13W 13W 13W Total system power consumption for 13W =13.5W 630 630 650 650 1000 1000 1050 1050 1350 1350 28 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount IES FILES ARE AVAILABLE UPON REQUEST

ROCKPORT - CHATSWOOD NSW AUSTRALIA 29

LED RANGE IP43 28W LED adjustable track* spotlight utilising high efficiency LED optical controlled design system and resulting in the maximum output of available light. 71098 60 175 155 45 130 * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 350 Black Fully adjustable three circuit track mount 30W Japanese LED Module or 36 Beam with no harsh cut-off and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied with 240V electronic integral non-dimmable driver Die-cast and extruded aluminium alloy construction Standard supplied with three circuit track adaptor Clear tempered glass lens BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS 71098-SP-3K 71098-FL-3K 71098-WFL-3K 71098-SP-4K 71098-FL-4K 71098-WFL-4K 71098-SP-5K 71098-FL-5K 71098-WFL-5K 36 47 36 47 36 47 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K 30W 30W 30W 30W 30W 30W 30W 30W 30W Total system power consumption =30W 2340 2340 2340 2470 2470 2470 2360 2360 2360 30 FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Leading and trailing edge mains dimmable FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP20 60W LED Adjustable Track* Spotlight utilising high efficiency LED optical controlled design system and resulting in the maximum output of available light. CODE: 71100 000 60 175 145 45 130 * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 350 Black BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS Fully adjustable three circuit track mount 60W Japanese LED Module or 47 Beam with no harsh cut-off and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs. Power factor > 0.9 with active power factor correction Supplied with 240V electronic integral non-dimmable driver Die-cast and extruded aluminium alloy construction Standard supplied with three circuit track adaptor Clear tempered glass lens 71100-SP-3K 71100-WFL-3K 71100-SP-4K 71100-WFL-4K 47 47 3000K 3000K 4000K 4000K 60W 60W 60W 60W Total system power consumption = 60W 5400 5400 5520 5520 FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Leading and trailing edge mains dimmable FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount IES FILES ARE AVAILABLE UPON REQUEST 31

LED RANGE IP54 Track Mounted LED Light for product highlighting, suitable for 3-circuit track*. Assembled with integral dimmable driver. 71115 130 135 * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 360 Black BEAM COLOUR CODE ANGLE TEMPERATURE WATTAGE LUMENS 13W or 20W Japanese LED Module 13.5W or 20W total system power consumption, 36 and 52 beam reflectors with no harsh cut off and ultra low glare Die-cast aluminium alloy construction with polyester powdercoat Stainless steel fasteners Totally sealed unit with clear tempered glass Integral mains driver leading and trailing edge dimmable Power factor > 0.9 50,000+ Hours lifespan Max. 15% Lumen depreciation after 40,000 Hrs 71115-SP-3K-13W 71115-FL-3K-13W 71115-SP-4K-13W 71115-FL-4K-13W 71115-SP-3K-18W 71115-FL-3K-18W 71115-WFL-3K-18W 71115-SP-4K-18W 71115-FL-4K-18W 71115-WFL-4K-18W 36 36 36 52 36 52 3000K 3000K 4000K 4000K 3000K 3000K 3000K 4000K 4000K 4000K Total system power consumption = 20W 13W 13W 13W 13W Total system power consumption for 13W =13.5W 20W 20W 20W 20W 20W 20W 1000 1000 1050 1050 1750 1750 1750 1900 1900 1900 32 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. IES FILES ARE AVAILABLE UPON REQUEST FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM Surface Mount

LED RANGE IP20 Fully Adjustable Professional LED Projector with integral 240V driver. Available as 3-circuit track* mounting or surface mounted versions. 71099 232 292 140 315 * 3-CIRCUIT TRACKS RECOMMENDED ARE SERIES 25 TRACKS SYSTEMS. ALSO COMPATIBLE WITH MANY COMMON EUROPEAN BRAND 3-CIRCUIT TRACKS. 360 Black CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 30W or 60W Japanese LED Module or 47 Beam with no harsh cut-off and ultra low glare Super efficient optical control 50,000+ hour lifespan Max. 15% lumen depreciation after 40,000 hrs. Power factor > 0.9 with active power factor correction Manufactured from die-cast and extruded aluminium Standard supplied with fully adjustable 3-circuit track adaptor Clear tempered glass lens 71099-SP-3K 71099-WFL-3K 71099-SP-4K 71099-WFL-4K 71099-SP-5K 71099-WFL-5K 71299-SP-3K 71299-WFL-3K 71299-SP-4K 71299-WFL-4K 47 47 47 47 47 3000K 3000K 4000K 4000K 5000K 5000K Total system power consumption = 30W 3000K 3000K 4000K 4000K Total system power consumption = 60W 30W 30W 30W 30W 30W 30W 60W 60W 60W 60W 2340 2340 2470 2470 2360 2360 5400 5400 5520 5520 FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Leading and Trailing edge mains dimmable FOR MODEL OPTIONS. ADD SUFFIX AFTER THE CODE: /SM For surface mount IES FILES ARE AVAILABLE UPON REQUEST 33

LED RANGE IP20 SELV High output energy efficient LED Pendant, with wide distribution reflector shade in anodised aluminium with matching interior finish. A brilliant optically controlled LED pendant ideal for shopping centres and retail outlet applications, over counters or merchandise. A great alternative to metal halide or halogen luminaires. 71075 71083 320 165 130 425 AVAILABLE ONLY IN 47 BEAM ANGLE Anodised 360 Black 13W or 28W Japanese LED Module Super efficient optical control 50,000+ hours lifespan Max. 15% lumen depreciation after 40,000 hrs Comfort low glare output Adjustable stainless steel wire suspension Power factor > 0.9 with active power factor correction Supplied with mains driver for remote mounting Supplied completely assembled with easy quick connect harness and 240V power cord and moulded plug top CODE Fixture is supplied with a 2.2m white cable harness and a 2 metre Gripple Stainless Steel Wire Suspension Kit. EASILY CONNECTS IP64 QUICK CONNECT 30W DRIVER STAINLESS STEEL SUSPENSION 71075-WFL-3K-13W 71075-WFL-4K-13W 47 47 3000K 4000K 13W 13W 1000 1050 SUPPLIED WITH REMOTE LEADING AND TRAILING EDGE DIMMABLE DRIVER. 71075-WFL-3K-28W 71075-WFL-4K-28W 71075-WFL-3K-28W BEAM ANGLE COLOUR TEMP WATTAGE Total system power consumption for 13W = 13.5W 47 3000K 28W 2340 47 4000K 28W 2470 47 5000K 28W 2360 SUPPLIED WITH NON-DIMMABLE DRIVER. Total system power consumption for 28W = 30W LUMENS 28W Japanese LED Module Super efficient optical control 50,000+ hours lifespan Max. 15% lumen depreciation after 40,000 hrs Power factor > 0.9 with active power factor correction Supplied completely assembled with easy quick connect harness and 240V power cord and moulded plug top Die-cast aluminium alloy body Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation. CODE 71083-SP-3K 71083-FL-3K 71083-WFL-3K 71083-SP-4K 71083-FL-4K 71083-WFL-4K 71083-SP-5K 71083-FL-5K 71083-WFL-5K BEAM ANGLE 36 47 36 47 36 47 COLOUR TEMP 3000K 3000K 3000K 4000K 4000K 4000K 5000K 5000K 5000K Fixture is supplied with a 2.2m white cable harness and a 2 metre Gripple Stainless Steel Wire Suspension Kit. WATTAGE 28W 28W 28W 28W 28W 28W 28W 28W 28W Total system power consumption for 28W = 30W EASILY CONNECTS IP64 QUICK CONNECT 30W DRIVER STAINLESS STEEL SUSPENSION LUMENS 2340 2340 2340 2470 2470 2470 2360 2360 2360 34 FOR DIMMING CONVERTER DRIVER OPTIONS. ADD SUFFIX AFTER THE CODE: /DIM Trailing edge mains dimmable /DSI Digital dimming /DALI Dimming IES FILES ARE AVAILABLE UPON REQUEST

SHADES - ADELAIDE SA 35

LED RANGE IP10 SELV LED highbay with contemporary design features and styling, incorporating the latest LED Technology. Ideal for use in shopping areas, food areas and retail outlets. 71084 Fixture is supplied with a 2.2m white cable harness and a 2m GRIPPLE Stainless Steel Wire Suspension Kit. 420 420 STAINLESS STEEL SUSPENSION Anodised CODE BEAM ANGLE COLOUR TEMPERATURE WATTAGE LUMENS 57W Japanese LED module 71084-3K WIDE 3000K 60W 5400 60W total sytem power consumption Super efficient optical control system for maximum light output 50,000+ hours lifespan Maximum 15% lumen depreciation after 40,000 hours Power factor > 0.9 with active power factor correction Supplied with a single 60W electronic driver. The driver has IP64 rating to protect the electronics from humidity, wet environments and moisture in air conditioning areas Driver is mounted remotely Spun aluminium reflector in matt anodised finish inside and outside 71084-4K WIDE 4000K 60W 5520 Total system power consumption = 60W 36 IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP44 SELV High output energy efficient LED highbay with excellent ambient and upward lighting. Bug free design with no UV or maintenance issues. 71079 71078 71078 71079 Fixture is supplied with a 2.2m white cable harness and a 2m GRIPPLE Stainless Steel Wire Suspension Kit. 500 400 STAINLESS STEEL SUSPENSION WHITE CABLE HARNESS Anodised CODE WATTAGE COLOUR TEMP BOTTOM VISOR IP RATING LUMENS 57W Japanese LED module 71078 60W 4700K CLOSED IP44 4928 60W total system power 4700K colour temperature Super efficient wide light distribution 50,000+ hours lifespan Max. 15% lumen depreciation after 40,000 hrs. Power factor > 0.9 with active power factor correction Supplied assembled with easy connect harness on driver and 240V power cord and moulded plug Adjustable stainless steel wire suspension Remote electronic gear Heatsink manufactured from custom developed aluminium alloy for better and faster heat dissipation. Polycarbonate prismatic diffuser with bottom cover (code 71078) Polycarbonate prismatic diffuser without the bottom cover (code 71079) 71079 60W 4700K OPEN Total system power consumption for 57W = 60W IP20 5253 IES FILES ARE AVAILABLE UPON REQUEST 37

LED RANGE IP65 CUTTING POINT CUT BETWEEN COPPER DOTS Waterproof IP65 Flexible Side Emitting LED Strip Self-adhesive waterproof and flexible LED Strip for indoor and outdoor use. Soft and flexible PCB makes it possible to bend the strip into any shape Cut off possible every 3 LED position, allowing for different length requirements Suitable for back of signage, advertising, backlights, stairs, coves etc Emitting colour white, other colours on application Can be bent down to 30mm diameter Ultra super bright LEDs Low power consumption Up to 50,000 hour lifespan No maintenance IP65 weather protection Beam angle of 60 3M 200MP PEEL OFF SELF ADHESIVE BACKING 71173 71174 71173 71174 CODE 7.2W/m in a five metre reel in warm white colour 7.2W/m in a five metre reel in cool white colour VOLTAGE 12V DC 12V DC COLOUR TEMPERATURE 3300K 4200K WATTAGE /m 7.2W 7.2W 71167 WATTAGE /5m reel 36W 36W 240V-12V-DC 5Amps/60W regulated power supply Power factor > 0.9 with active power factor correction. Rated IP64 with power cord and plug. Size 181x62x35mm with 1m power cord and 0.3m output cord. LUMENS /m 410 440 LUMENS /5m reel 2050 2200 LED QTY /5m reel 430 430 38 IES FILES ARE AVAILABLE UPON REQUEST

7.2W LED RANGE IP65 14.4W Waterproof IP65 Flexible SMD LED Strip Unique product, waterproof and flexible for outdoor and indoor use. 7.2W (RGB) Ultra super bright LEDs Low power consumption Soft and flexible PCB can bend to any shape Can be bent down to 30mm diameter Cut off possible every 3 LED position, allowing different length requirements Up to 50,000 hour lifespan. No maintenance RGB version available IP65 weather protection officially tested by TUV Beam angle of 120 5000 10 2.5 3M 200MP PEEL OFF SELF ADHESIVE BACKING 71178 71179 71180 71187 71188 7.2W/m in a five metre reel in cool white colour 7.2W/m in a five metre reel in warm white colour 7.2W/m in a five metre reel in flexible RGB 7.2W per metre = 30 LEDs per metre. 12V DC 14.4W/m in a five metre reel in warm white colour 14.4W/m in a five metre reel in cool white colour 14.4W per metre = 60 LEDs per metre. 12V DC ALSO AVAILABLE IN... Other fixed colours Red, Green, Blue and Yellow are available on request. RGB colour change is available for waterproof IP65 flexible SMD LED strip. CODE 71178 71179 71180 71187 71188 VOLTAGE 12V DC 12V DC 12V DC 12V DC 12V DC BEAM ANGLE 120 120 120 120 120 COLOUR TEMPERATURE 3300K 4200K RGB 3300K 4200K WATTAGE /m 7.2W 7.2W 7.2W 14.4W 14.4W 71175 RGB controller (max load of 200 watts) with Wall Switch Mechanism and IR Remote Control 71176 RGB Power Repeater (max load of 100 watts) 71167 240V-12V-DC 5Amps/60W regulated power supply Power factor > 0.9 with active power factor correction. Rated IP64 with power cord and plug. Size 181x62x35mm with 1m power cord and 0.3m output cord. 71168 240V-12V-DC 5Amps/60W regulated power supply This power supply driver will run 5 lengths of 5 metres each. IP67 Waterproof. WATTAGE /reel 36W 36W 36W 72W 72W LUMENS /m 420 455 171 864 936 LUMENS /reel 2100 2275 855 4320 4680 RGB Wall Switch Plate CLIPSAL compatible (plate not supplied) + MODE BRT IR Remote Control 5050 LED QTY p/m 30 30 30 60 60 MODE SPEED R G B 1 2 3 4 5 6 7 8 9 5050 LED QTY p/reel 150 150 150 300 300 IES FILES ARE AVAILABLE UPON REQUEST 39

VODAFONE STORE - CHATSWOOD NSW 40

7.2W 9.6W LED RANGE IP10 Non-waterproof Flexible Ribbon LED Self-adhesive LED strip for indoor use only 14.4W 5000 2.5 8 Beam angle of 120 Suitable for any indoor use only Ultra super bright LEDs Very low power consumption Up to 50,000 hour lifespan Length of 5 metres per reel. IP10 JOINING OR CUTTING TO SIZE 7.2W LED Strip can be joined or cut to size at interval of 33mm. 9.6W LED Strip can be joined or cut to size at interval of 50mm. 14.4W LED Strip can be joined or cut to size at interval of 50mm. 3M 200MP PEEL OFF SELF ADHESIVE BACKING 71265 7.2W/m in a five metre reel - warm white 71266 7.2W/m in a five metre reel - cool white CODE 71265 71266 71267 71268 71271 71272 VOLTAGE 12V 12V 24V 24V 12V 12V BEAM ANGLE 120 120 120 120 120 120 COLOUR TEMPERATURE 3300K 4200K 3300K 4200K 3300K 4200K 71267 10W/m in a five metre reel - warm white WATTAGE /m 7.2W 7.2W 10.0W 10.0W 14.4W 14.4W WATTAGE /reel 36W 36W 50W 50W 72W 72W LUMENS /m 420 455 600 650 864 936 71271 14.4W/m in a five metre reel - warm white 71268 71272 10W/m in a five metre reel - cool white 14.4W/m in a five metre reel - cool white 3528 LED quantity = 90 LEDs per metre. 3528 LED quantity = 120 LED per metre. 5050 LED quantity = 60 LED per metre. LUMENS /reel 2100 2275 3000 3250 4320 4680 3528 LED Qty/m 90 90 120 120 - - 5050 LED Qty/m - - - - 60 60 IES FILES ARE AVAILABLE UPON REQUEST 41

LED RANGE SELV ROHS Ideal for many applications such as displays, lighting effects to integral within a lighting fixture. Available in LED five colours. Ideal for many applications such as displays, lighting effects to integral within a lighting fixture. Miniature 1W LED module with built-in regulator RGB LED module with built-in regulator 71010 71011 20 50 3.2 20 20 3.2 50 50 1W Class LED module, available in 5 LED colours Requires 12V DC supply 120 Beam Angle Built in constant current regulator and controlling voltage drop Allows for up to 1.5V voltage drop without affecting brightness Thermally stable without additional heatsinking Supplied with 135mm cable stripped and tinned 2W Class LED module Requires 12V DC power supply 120 Beam Angle Built in constant current regulator and controlling voltage drop Allows for up to 1.5V voltage drop without affecting brightness Thermally stable without additional heatsinking Supplied with 200mm long cables. Ta max: 45 C CODE COLOUR FLUX LOAD VOLTAGE RANGE CODE COLOUR FLUX LOAD VOLTAGE RANGE 71010-3K 71010-4K 71010-R 71010-G 71010-B Warm Cool Red Green Blue 51 lm 51 lm 18 lm 36 lm 9 lm max. 1W max. 1W max. 1W max. 1W max. 1W CAN BE MOUNTED TO MOST SURFACES USING DOUBLE SIDED TAPE. IP64 POWER SUPPLY FOR UP TO 60PCS OF 71010 CODE VOLTAGE WATTAGE 71167 240V-12V-DC 5Amps 60W Power Factor > 0.9 with active power correction. Size 181x62x35mm with 1m power cord and 0.3m output cord. FOR MORE DRIVER SELECTION SEE PAGE 46-47 9.5-13.2V 9.5-13.2V 8.0-13.2V 9.5-13.2V 9.5-13.2V POWER SUPPLY REGULATED 71011 RGB 51.3 lm max. 2W 9.5-13.2V CAN BE MOUNTED TO MOST SURFACES USING DOUBLE SIDED TAPE OR BY USING SCREWS. IP64 POWER SUPPLY CODE VOLTAGE WATTAGE 71167 240V-12V-DC 5Amps 60W Power Factor > 0.9 with active power correction. Size 181x62x35mm with 1m power cord and 0.3m output cord. FOR MORE DRIVER SELECTION SEE PAGE 46-47 POWER SUPPLY REGULATED 42 REMOTE DIMMING OPTIONAL CONTROLLERS: DALI - SWITCH DIM (MAX. 60W) 1-10V - DIM (MAX. 60W) IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP67 SELV Miniature push-in recessed button style wall light or uplight with recessing tube. Ideal for illuminating stairs and walkways and for feature lighting. Miniature screw-in semi-recessed round button style. Can be used for wall, ceiling or uplighting. Ideal for illuminating stairs and walkways and for feature lighting. 71201 71202 71203 38 38 BOTTOM VIEW 2x FIXING HOLES 25 3 23 26 38 25 3 20 23 50 35 12 22 10 25 BUILT IN CONSTANT CURRENT CONTROLLER IMMUNE TO VOLTAGE DROP Brushed Stainless Steel BUILT IN CONSTANT CURRENT CONTROLLER IMMUNE TO VOLTAGE DROP Brushed Stainless Steel BUILT IN CONSTANT CURRENT CONTROLLER IMMUNE TO VOLTAGE DROP 25 Brushed Stainless Steel RUBBER RINGS TO FIT INSIDE PVC RECESSING TUBE 1 Watt LED module wide beam Fully sealed with epoxy resin for IP67 rated protection Manufactured from cast AISI 316 stainless steel and machined to shape, with brushed linished finish Designed with rubber rings to fit tightly into a 32mm orange PVC conduit or 25mm hole Connects to a 12V DC power supply, to be ordered separately Up to 50,000 hours lifespan CODE Code-WW Code-CW Code-B Code-R BEAM ANGLE 120 PVC RECESSING TUBE 32 54 SUPPLIED WITH PVC RECESING TUBE FOR EASY INSTALLATION COLOUR TEMPERATURE 3000K RUBBER RINGS OPERATING VOLTAGE 12V DC 120 4000K 12V DC 120 BLUE 12V DC 120 RED 12V DC 33 TO FIT INSIDE PVC RECESSING TUBE PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. CODE 1 Watt LED module wide beam Fully sealed with epoxy resin for IP67 rated protection Manufactured from cast AISI 316 stainless steel and machined to shape, with brushed linished finish Designed in two pieces for surface mounted or semi-recessed applications The top screw down piece covers the screws resulting in an aesthetically pleasing design Connects to a 12V DC power supply, to be ordered separately Up to 50,000 hours lifespan IP20 POWER SUPPLY FOR UP TO TEN FIXTURES VOLTAGE WATTAGE 71169 240V to 12V DC 10W POWER SUPPLY REGULATED FOR MORE DRIVER SELECTION SEE PAGE 46-47 IES FILES ARE AVAILABLE UPON REQUEST 43

LED RANGE IP65 Recessed LED wall light with downward distribution to illuminate floors and pathways without glare. 71190 143 270 93 135x260 MOULDED INSTALLATION WELL SUPPLIED WITH EACH FITTING DIAGRAM SHOWS THE FITTING INSIDE THE MOULDED INSTALLATION WELL Black 6.6W Japanese LED module Manufactured from aluminium die-cast alloy Tempered diffuser glass Powdercoated finish in acid clean and polyester paint baked at 180 C Silicone seal with stainless steel fasteners Supplied with 240V input and integral LED dimmable driver Moulded installation well supplied with each fitting LED version for no maintenance, energy saving and up to 50,000 hours lifespan CODE COLOUR TEMPERATURE LEADING AND TRAILING EDGE MAINS DIMMABLE WATTAGE LUMENS INPUT VOLTAGE 71190-3K 3000K 6.6W 680 240V 71190-4K 4000K 6.6W 730 240V 44 IES FILES ARE AVAILABLE UPON REQUEST

LED RANGE IP40 SELV IP55 SELV Recessed wall light with remote driver for internal applications. Can be used as an uplighter or downlighter. Perfect for illuminating stairs and walkways. Recessed wall light with an asymmetric distribution for illuminating floors, stairs and walkways with minimal glare. Optional Solid Brass or Copper trims. 71185 72744 72745 WITH FROSTED GLASS WITH CLEAR GLASS 55 92 130 145 118 100 35 115 90 OPTIONAL RECESSING BLOCKOUT (#7890 see below) OPTIONAL TRIMS: Brushed Stainless Steel 100 x130 Brushed Stainless Steel Brass Copper 3.9W Japanese LED Module Built in constant current controller Requires remote 12V DC power supply to be ordered seperately Pressed zinc steel housing and polyester powdercoated in white Matt anodised high purity Alanod Aluminium reflector Concealed LED for reduced glare As standard supplied with Polycarbonate clear cover Choice of front trim finishes, white, silver or stainless steel 7890 OPTIONAL RECESSING BLOCKOUT FOR CONCRETE OR MASONARY WALLS. MADE FROM GALVABOND STEEL. TO BE ORDERED SEPERATELY. 118 90 92 CODE 3.9W Japanese LED module Reversible, can be used for uplighting or downlighting AISI 316 Stainless Steel construction Brushed Stainless Steel front trim Tempered 3mm glass lens Silicone rubber cable entry grommet Neoprene rubber seals for glass Stainless Steel fastener details COLOUR TEMPERATURE *PLEASE ADD PRODUCT CODE WHERE SPECIFIED ABOVE. WATTAGE LUMENS LINE VOLTAGE *Code-3K 3000K 3.9W 340 240V *Code-4K 4000K 3.9W 365 240V REMOTE DIMMING OPTIONS AVAILABLE: DALI - SWITCH DIM (MAX. 60W) 1-10V - DIM (MAX. 60W) IES FILES ARE AVAILABLE UPON REQUEST 45

INDOOR DRIVERS & CONTROL GEAR Constant voltage converter Universal input voltage range Constant output voltage Overtemperature and overload protection Short-circuit shutdown feature with automatic restart Protection class 2, SELV Type of protection IP20 Plastic casing white Low power loss High efficiency 7910026 7910030 7910024 30 43 185 254 21,5 22,5 4,2 4,2 35 45 63 270 31,5 4,2 40,5 161,6 230 246 35W 12V OR 24V DC 60W 12V OR 24V DC 100W 12V OR 24V DC INDOOR IP20 - REMOTE LCU INDOOR IP20 - REMOTE LCU INDOOR IP20 - REMOTE LCU 7910025 7910022 7910023 Type LCU 035/12 E020 Output Voltage 12V DC Max. Load 35W Output Current Range 0.25 2.91 A 7910026 Type LCU 035/24 E020 Output Voltage 24V DC Max.Load 35W Output Current Range 0.12 1.45 A Type Output Voltage Max. Load Output Current Range 7910030 LCU 060/12 E020 12V DC 60W 0.4 5.0 A Type LCU 060/24 E020 Output Voltage Max. Load 24V DC 60W Type LCU 100/12 E020 Output Voltage 12V DC Max. Load 100W Output Current Range 0.8 8 A 7910024 Type LCU 100/24 E020 Output Voltage 24V DC Max. Load 100W Output Current Range 0.4 4 A 46

OUTDOOR DRIVERS & CONTROL GEAR Constant voltage converter Universal input voltage range Constant output voltage Connection: Cable with end sleeves (length approx. 500m) Metal casing, encapsulated Polarity identifiers, secondary +red/ black Short-circuit shutdown feature with automatic restart Overload protection by restricting output Overtemperature protection Type of protection IP67 Low power loss High efficiency SELV CODE: 000 107,6 4-4,2 24,8 183,5 173 13 128,6 52 32 4 233,6 221,6 4-4,2 24,8 227,6 215,6 4,2 32,8 192,5 40 242,6 52 236,6 60 30 32 34 18W 12V DC OUTDOOR IP67 35W 12V DC OUTDOOR IP67 75W 12V OR 24V DC OUTDOOR IP67 100W 12V OR 24V DC OUTDOOR IP67 7910032 7300071 7300070 7300069 Type LCU 015/12 D010 Output Voltage 12V DC Max.Load 18W Output Current Range 0.08 1.25 A Type LCU 035/12 D010 Output Voltage 12V DC Max.Load 35W Output Current Range 0.25 2.91 A Type LCU 060/12 D010 Output Voltage 12V DC Max.Load 75W Output Current Range 0.4 5.0 A 7910038 Type LCU 060/24 D010 Output Voltage 24V DC Max.Load 60W Type LCU 100/12 D010 Output Voltage 12V DC Max.Input Power 100W 7910039 Type LCU 100/24 D010 Output Voltage 24V DC Max.Input Power 100W 47

CUE - WESTFIELD LIVERPOOL NSW

METAL HALIDE RANGE CHAPTER NAME 49 61

METAL HALIDE RANGE IP44 SCOOP MINI is a compact adjustable downlighter offers reflector options to provide spot and floodlighting for display lighting applications. Constructed in die-cast aluminium with heat resistant powdercoat paint finish. The lamp housing is supported by a mechanism that provides smooth positive aiming and incorporates a solid heatsink for heat dissipation from around the lampholder. SCOOP is a recessed adjustable downlighter with wide beam distribution for floodlighting vertical displays. The lamp housing features a solid finned heatsink to facilitate heat dissipation and a smooth positive tension mechanism for the angular adjustment. Constructed in pressure die-cast aluminium for defined styling and high purity aluminium reflector with anodised protection. 100 125 125 152 350 80 115 350 Black 80 143 Black 79325 240V 20W or 35W CDM-TC G8.5 35º MEDIUM FLOOD 79351 240v 35W or 70W CDM-TC G8.5 40º MEDIUM FLOOD 79326 240V 20W or 35W CDM-TC G8.5 Adjustable downlight supplied with remote electronic control gear. 60º FLOOD 79350 240v 35W or 70W CDM-TC G8.5 Adjustable downlight supplied with remote electronic control gear. 60º FLOOD OPTIONAL GOLD REFLECTOR AVAILABLE BACK VIEW OPTIONAL GOLD REFLECTOR AVAILABLE BACK VIEW 50

METAL HALIDE RANGE IP40 SCOOP MAJOR recessed adjustable downlighter with wide beam distribution for floodlighting vertical displays. The lamp housing features a solid finned heatsink to facilitate heat dissipation and a smooth positive tension mechanism for the angular adjustment. Constructed in pressure die-cast aluminium for defined styling and high purity aluminium reflector with anodised protection. 150 186 350 80 176 Black 79357 240v 150W CDM-T G12 Recessed adjustable and rotational downlight supplied with remote electronic control gear. Above codes supplied with 67 reflector as standard. 67º FLOOD BACK VIEW 51

CUE - WESTFIELD LIVERPOOL NSW 52

METAL HALIDE RANGE IP40 OPTOR is a recessed adjustable downlighter for lighting vertical displays and features. Constructed in pressure die-cast aluminium for defined styling. The Optor features high purity aluminium reflector with anodised protection, with twist off front trim which allows for easy relamping. The Optor is multi-axis tilt adjustable. 145 152 350 35 x35 142 Black 74324 240v 35W-70W CDM-T G12 Adjustable downlighter with remote electronic control gear and wide beam reflector. 50º 74322 240v 20W-35W-70W CDM-R111 Gx8.5 Adjustable downlighter with remote electronic control gear. Lamps available in 15, and 40 beam angles. BACK VIEW 05 Black finish 01 finish 53

CUE - WESTFIELD LIVERPOOL NSW 54

METAL HALIDE RANGE IP10 QUAD is an aperture downlighter with one way tilt adjustment for directional lighting with minimal glare. The Quad features ceramic metal halide reflector lamps with precise spot and medium flood beams, this luminaire is fabricated from pressed steel with rigid trim and powdercoat paint finish. ROTA is a multidirectional downlighter with twin gimble rings and trim produced completely in pressure die-cast aluminium. 200 190 150 185 30 130x135 165 30 x30 73135 73138 240v 35W CDM-R E27 240v 35W CDM-R E27 73137 240v 70W CDM-R E27 Recessed adjustable downlight supplied with electronic remote control gear. One way internal tilt. 73140 240v 70W CDM-R E27 Round multi-adjustable downlight supplied with electronic remote control gear.positive ceiling retention up to 50mm. IP40 TONDA Die-cast aluminium construction Ventilated frame design High purity aluminium reflector Tempered UV glass cover No-tool lamp replacement Add suffix HF to order code for electronic control gear. 73190 240V 70W Rx7s 160 Miniature fixed downlight. Supplied with matching remote magnetic control gear. 85 145 Black 210 73197 240V 70W Rx7s 230 125 Recessed fixed downlight. Supplied with matching remote magnetic control gear. 73201 240V 150W Rx7s Recessed fixed downlight. Supplied with matching remote magnetic control gear. Black Polished Chrome 55

METAL HALIDE RANGE IP20 IP40 ARDON recessed downlight features a square trim with a regressed black mask and circular reflector, economical double ended metal halide lamps and remote control gear makes it ideal for retail applications. Frame and trim are formed in pressed steel with powdercoat paint finish; supporting a clear tempered glass cover which is easily removed without tools for easy lamp replacement. The reflector is a matt anodised aluminium for even illumination. ALTA is an adjustable wallwasher with wide beam distribution for illuminating vertical displays in retail stores. Constructed in pressure die-cast aluminium. The Alta features a ventilated front housing, tempered safety glass, a positive adjustment mechanism and no tool lamp replacement. 130 150 90 185 147 232 175x175 60 220x130 Black 73143 240v 200W R7s 118mm Downlight for halogen lamp. 73993 240v 300W R7s 118mm Adjustable wall washer for 115mm halogen lamp 73146 240v 35W Rx7s 73997 240v 70W Rx7s 73147 240v 70W Rx7s 73150 240v 150W Rx7s Downlight with remote magnetic control gear. Add suffix HF to order code for electronic control gear. 74001 240v 150W Rx7s Supplied with matching remote magnetic control gear. Add suffix HF to order code for electronic control gear. 56

METAL HALIDE RANGE IP43 IP43 PIATTA is a recessed downlight for linear metal halide lamp. Features clear glass cover and matt silver reflector system. PIATTO is a series of square recessed downlights, available in multiple designs and lamp options. Manufactured from pressure die-cast aluminium with powdercoat paint finish. The Piatto features aluminium reflectors with a diffused or specular finish and tempered glass covers. This luminaire is supplied with remote matching standard control gear or optional electronic ballasts. 155 105 190 230 170x170 210x210 74812 240v 70W Rx7s Downlight supplied with remote magnetic control gear. 74837 240v 70W Rx7s Metal Halide 74845 240v 150 Rx7s Metal Halide Downlight with matching remote magnetic control gear. 57

METAL HALIDE RANGE IP10 CEPLEX is a series of recessed multiple downlighters with independant aiming that are ideal for retail and feature lighting applications. Utilising metal halide PAR30 reflector lamps, the Ceplex allows the designer to incorporate both flood and spot beam options into the fixture. The Ceplex is fabricated from pressed steel with powdercoat paint finishes; the twin gimble rings are in pressure die-cast aluminium with matt black interior finish. Add suffix HF to the order code for optional electronic control gear. 72181 72182 195 225 195 225 195 340 35 x35 170x170 35 x35 170x315 72183 72184 480 240v 35W to 70W CDM-R E27 Single or multiple downlighters with remote magnetic control gears. Add suffix HF to the order code for optional electronic control gear. 195 35 x35 170x465 225 340 340 225 35 x35 320x320 CEILING RETENTION SYSTEM FOR CEILINGS UP TO 40MM. M. 58

METAL HALIDE RANGE IP10 DEPLEX is a series of recessed multiple downlighters utilising low glare reflector lamps with ceramic metal halide light sources and high frequency electronic control gear. Each lamp can be independently aimed with a choice of spot or medium flood beam spreads. The Deplex is produced using a formed steel body and frame with die-cast aluminium multi adjustable rings. Interior colour is available in matt black only. 72151 72152 72153 195 185 195 185 195 185 195 195 340 340 480 480 25 x 25 170x170 25 x 25 170x315 25 x 25 170x465 240v 20W to 70W CDM-R111 Single or multiple downlighters with remote electronic control gears. CEILING RETENTION SYSTEM FOR CEILINGS UP TO 40MM. 59

METAL HALIDE RANGE IP20 VELUX are a series of multidirectional downlighters that utilise ceramic metal halide lamps in combination with faceted reflectors. The trims and gimble rings are produced using pressure die-cast aluminium, whilst its housings are pressed steel with black interior finish to minimise spill light. Clip-in tempered glass lens is easily removed for quick relamping. Strong and positive screw down ceiling retention system for celings up to 40mm are available. 73981 73982 73983 186 202 186 202 186 202 186 354 527 30 x 30 170x170 30 x 30 170x340 30 x 30 170x510 240v 35W to 150W 1xG12 Recessed single downlighters supplied with magnetic matching control gear. Add suffix HF for optional electronic control gear. 240v 35W to 150W 2xG12 Recessed single downlighters supplied with magnetic matching control gear. Add suffix HF for optional electronic control gear. POSITIVE SCREW DOWN CEILING RETENTION SYSTEM FOR CEILINGS UP TO 40MM. 240v 35W to 150W 3xG12 Recessed single downlighters supplied with magnetic matching control gear. Add suffix HF for optional electronic control gear. 60

SUVA - TAPOO SHOPPING CENTRE - FIJI 61

FITNESS FIRST - NSW AUSTRALIA

PENDANTS 63 65

PENDANTS IP10 KONO 40 Pendant downlighter features an extruded aluminium gear housing, and a prismatic polycarbonate reflector that provides efficient direct and indirect light output from a selection of lamp options. The Kono is ideal for industrial areas, high ceiling applications, retail spaces and warehouse areas. 510 400 FIXTURE IS SUPPLIED WITH 1200MM OF BLACK SILICONE CABLE AND HOOK BUT WITHOUT CHAIN OR WIRE SUSPENSION. 73840 240v 60W-75W-100W-150W E27 Halogen Open pendant downlighter for mains halogen lamps allow for economical dimming control. 73855 240v E27 ES Fluorescent Without control gear. 73841 240v 1 x 26W PLC-E G24q-3 73842 240v 2 x 26W PLC-E G24q-3 73843 240v 1 x 32W PLT-E G24q-3 73844 240v 2 x 32W PLT-E G24q-3 73845 240v 1 x 42W PLT-E G24q-4 73846 240v 2 x 42W PLT-E G24q-4 Open downlighter with integral electronic non dimmable control gear. 73850 240v 70W HQI-E E27 73848 240v 100W HQI-E E27 73851 240v 150W HQI-E E27 Pendant with 40cm high temperature prismatic polycarbonate reflector and integral non dimmable magnetic control gear OPTIONS 7284 OPTIONAL POLYCARBONATE COVER AND METAL LOCKING RING FOR 400MM FOR IP44 PROTECTION 64 CONTROL GEAR OPTIONS FOR COMPACT FLUORESCENT LAMPS ADD SUFFIX: - /HF Electronic non dimming. /AD Analogue dimming. /DSI Digital dimming. /DALI Addressable dimming.

PENDANTS IP10 IP20 CIRCUS pendant downlighter features a clear prismatic reflector shade in heat resistant polycarbonate to give both direct and indirect illumination while diffusing the light source. OCEAN pendant downlighter is produced using extruded and pressure die-cast aluminium. The ventilated lamp housing ensures optimum performance from a selection of energy saving lamps while the cover glass with frosted edge provides low glare control and lamp protection. Twin stainless steel wires with clutch fixings provide full and easy on site adjustment of the suspension height. The Ocean is powdercoated in silver with white glass reflector. Alternative colour glass and reflector styles are also available. 72830 240v 100W E27 halogen 190 240v 20W E27 fluorescent Control gear NOT required. 1000 2000 72837 502 240v 70/100W HQI-E Pendant supplied with matching remote magnetic control gear. 300 190 336 72840 240v 150W E27 halogen OC32-F42-WII 240v 42W PLT G24q-4 Open pendant downlight with integral electronic control gear. 240v 23W E27 fluorescent Control gear NOT required. 72842 240v 70W/100W/150W HQI-E Pendant supplied with matching remote magnetic control gear. 7283 OPTIONAL POLYCARBONATE COVER FOR 300MM IP44 400 1000 280 7284 OPTIONAL POLYCARBONATE COVER FOR 400MM IP44 OC32-C70-WII 240v 70W CDM-T G12 OC32-C15-WII 240v 150W CDM-T G12 Integral electronic control gear. WHITE GLASS REFLECTOR Standard colours are silver body and white hand blown glass reflector. Customised colours and combinations for corporate identity schemes can be supplied to special order. 65

JEANSWEST - NSW AUSTRALIA

12V DOWNLIGHTS & SPOTLIGHTS 67 79

12V DOWNLIGHTS IP20 MAESTRO is a recessed fixed downlight produced in pressure die-cast aluminium. This fitting features a twist and lock front ring, allowing for quick and easy lamp replacement and comes with a ceramic lampholder and high temperature leads to be connected to a 12V transformer. MAESTRO is also available as an adjustable recessed downlight. AVION series of recessed adjustable downlights features 355 of rotational movement for a complete directional lighting solution. CODE: 72466 80 100 95 105 90 60 72433 70 Black Chrome Brushed 30 80 Black Chrome Brushed 35 355 80 Black Chrome Brushed Chrome Chrome Chrome 12v 20W - 50W OR 4W - 10W LED Downlight with clear glass UV lens for general applicatons. 72435 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 12v 20W - 50W OR 4W - 10W LED Downlight with clear glass UV lens and 2-way tilt adjustable lamp positioning. 72466 12v 20W - 50W OR 4W - 10W LED Compact size recessed adjustable and rotatable downlight with removable centre for easy relamping, in die-cast aluminium alloy. IP20 PACER adjustable wall washers for highlighting vertical displays and wall features. Constructed in pressure die-cast aluminium and finished in a range of colours to suit modern interiors. 72300 100 80 Black 35 12v 20W - 50W OR 4W - 10W LED 355 90 Chrome Brushed Chrome 35 72312 92x92 105 Black 56 12v 20W - 50W OR 4W - 10W LED Chrome Brushed Chrome 35 72313 90 105 75 Black 12v 20W - 50W OR 4W-10W LED Chrome Brushed Chrome 68 Adjustable and rotatable wall washer supplied with ceiling fixing ring to allow easy removal for lamp replacement. Adjustable wall washer with square trim and removeable front plate for easy lamp replacement. Adjustable wall washer with round trim constructed in pressure die-cast aluminum with removeable front trim for easy lamp replacement. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

12V DOWNLIGHTS IP20 SLIDE is an adjustable recessed downlight with smooth positive adjustment system for directional aiming on to features and displays for maximum impact. The robust lamp housing is supported by a steel rail providing axial and rotational movement. Engineered in pressure die-cast aluminium alloy. Slide is available a range of quality finishes to compliment any interior. BLIZZARD recessed downlights feature a removeable inner reflector that allows easy lamp replacement with optional finishes to suit most interiors. The Blizzard is manufactured using die-cast aluminium and powdercoat finished. Remote transformer is required. 102 82 60 POSITIVE ADJUSTMENT SYSTEM 90 80 80 355 Black 72805 12v 20W - 50W OR 4W - 10W LED Recessed adjustable and downlight requiring remote transformer. 90 Chrome Brushed Chrome 80 Chrome 72469 72479 12v 20W - 50W OR 4W - 10W LED 12v 20W - 50W OR 4W - 10W LED Low glare effect compact downlight with specular aluminium reflector. Low glare effect compact downlight with white aluminium reflector. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. IP40 DIXI series of recessed downlights featuring a low profile trim for a flush look finish on the ceiling. The regressed lamp position and integral black baffle provide low glare lighting to any interior, while the matt white finish can be overpainted to match the ceiling colour if required. 72480 87 76 130 12v 20W - 50W OR 4W - 10W LED Fixed pinhole downlight provides low glare ambient lighting. Chrome Brushed Chrome OPTIONAL ALUMINIUM RECESSING RING 7248 12v 20W to 50W 28 78 85 Aluminium recessing ring to line the penetration in plasterboard ceilings, allowing easier relamping and protecting the ceiling. Creates a shadowline detail between the ceiling and trim. 79 72481 130 30 76 87 12v 20W - 50W OR 4W - 10W LED Chrome Brushed Chrome Adjustable keyhole downlight allows directional lighting onto features and walls. 69 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

12V DOWNLIGHTS IP10 TOAST downlights with their unique shape provide wash lighting onto walls and vertical features and displays. With an extended lamp mounting arm for easy tilt adjustment of the lamp. Toast is available in twin lamp or single fixed downward aiming lamp and single adjustable. Remote transformer is required. 86 70 86 70 166 166 r=38 161 75 40 76 r=38 161 75 40 76 72198 12v 20W - 50W OR 4W - 10W LED Single adjustable lamp with all white finish. 72197 12v 2x20W - 50W OR 4W-10W LED Recessed downlighters with all white finish. Double lamp with one adjustable. 72190 86 70 166 r=38 12v 20W - 50W OR 4W-10W LED 161 Single adjustable lamp with black interior. 75 40 Chrome Brushed Chrome 72199 86 70 166 r=38 12v 2 x 20W - 50W OR 4W-10W LED Recessed downlighters with black interior & optional trim colours. Double lamp with one adjustable. 161 75 40 Chrome Brushed Chrome 70 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

12V DOWNLIGHTS IP20 MODTRIM downlights are designed to visually integrate within white planar ceilings while providing low glare illumination; due to the deep conical housing with minimal trim width and thickness. The lamp is securely retained by a spring loaded lampholder on to a thermally isolated seat allowing for quick lamp replacement. Formed in die-cast and spun aluminium and powdercoat paint finished. The Modtrim features a ceramic lampholder with teflon insulated leads and connection block. 95 85 81 85 MODTRIM MODWAY 73 30 75 72270 12v 20W - 50W OR 4W - 10W LED Fixed recessed downlight requiring a remote transformer. 72271 12v 20W - 50W OR 4W - 10W LED Adjustable recessed downlight requiring a remote transformer. SHANGHAI STORIES - NSW AUSTRALIA MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 71

12V DOWNLIGHTS IP66 WET is a range of downlights for use in applications that require various degrees of protection from the elements. Wet s IP66 rating makes it suitable for use under the eaves of rooves, awnings, laundries, bathrooms and above shower cubicles. Wet is constructed from pressure die-cast aluminium and powdercoat paint finish with silicone seals for added durability. Remote transformer is required. 100 100 28 100 109 81 IP66 85 IP66 IP54 85 65 72994 12v 20W - 50W OR 4W - 10W LED Recessed downlight with feature glass trim in frost with clear centre. Ideal for bathrooms and saunas. Special ceiling clips that require a screwdriver for positive and tight fit to the ceiling. Silicone seal for IP66 prevents splashes of water from entering. Suitable for ceiling thickness up to 20mm. 72995 12v 20W - 50W OR 4W - 10W LED Recessed downlight with domed feature glass trim in frost with clear centre. Suitable for ceiling thickness up to 20mm. 72934 12v 20W G4 Semi recessed downlight with frost glass enclosed diffuser, body made from polycarbonate plastic. Heat resistant and flame proof with silicone seal. IP20 MINI SCAN tilt adjustable downlight/wallwasher with pleated reflector in a selection of finishes. Pressure die-cast aluminium trim has twist off action to allow for easy lamp replacement and simple installation. Can be used as a downlight or wall washer with a 20 adjustable tilt action. 114 135 72584 12v 20W - 50W OR 4W - 10W LED Tilt adjustable downlight with pleated specular reflector. Requires remote transformer. 355 20 102 72 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

12V DOWNLIGHTS IP65 WET range of downlights are for use in various applications where protection from the ingress of moisture is required, like in food service areas. Fittings are rated at IP54 and above, and feature silicone seals for durability. Remote transformer is required. 120 120 73 90 90 84 IP54 77 IP54 77x77 IP65 70 Chrome Brushed Chrome 72216 12v 20W to 50W Recessed downlight with frost glass sealed into a round aluminium die-cast trim, easily removed for relamping, and polycarbonate body. 72217 12v 20W to 50W Recessed downlight with frost glass sealed into a square aluminium die-cast trim and polycarbonate body. 72280 12v 20W - 50W OR 4W - 10W LED Recessed downlight with regressed lamp. Die-cast aluminium construction with sealed frost glass lens. 72285 12v 20W - 50W OR 4W - 10W LED 72 99 The protective cover is to restrict the entry of flammable materials into the lamp and complies to new electrical standards AS/NZ: 3000-2007 97 IP65 Recessed downlight for wet areas. Die-cast aluminium construction with sealed frosted glass lens for diffused light distribution. IP65 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 85 Chrome Brushed Chrome 73

12V DOWNLIGHTS IP20 RIGA display downlighters offer single or multiple downlights with independant adjustment between fixtures. Housing and trims are constructed from steel and machined aluminium with powdercoat black interior paint finish. 72261 72262 72263 170 170 170 118 225 325 118 118 118 35 355 108x100 35 355 108x208 35 355 108x310 12v 20W - 50W OR 4W - 10W LED Single, twin recessed downlights, with independent aiming. Internal housing is always in matte black. Installation springs suitable for ceiling thickness up to 20mm. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. IP10 QUAD series of recessed downlights with single lamp provide directional illumination with minimal glare. Housings in pressed steel with black interior finish to reduce spill light. Steel trims with powdercoat paint finish. Ceramic lampholder is mounted on a removeable spring clip for easy relamping. 72251 12v 20W - 50W OR 4W - 10W LED Tilt adjustable downlight to fit round hole ceiling penetration. 100 120 90MM ROUND HOLE CUT OUT REQUIRED. 74 90 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

SUPRE - CHATSWOOD NSW 75

12V SPOTLIGHTS IP10 COMET is a spotlight with open lamp housing allowing for complete adjustment on to displays and features. 75 140 80 50 355 90 60 Black 72372 12v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer. 72372 ME 12v 20W - 50W OR 4W - 10W LED Spotlight with Electronic three circuit track adaptor, and integral electronic transformer. To be used on Series 25 Track. 72372 EB 12v 20W - 50W OR 4W - 10W LED Spotlight with integral electronic transformer in the base. 72372 FM 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer. 72372 ET 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor, for BT Track, and integral electronic transformer. 76 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

12V SPOTLIGHTS IP10 SHROUD is a spotlight with metal lamp housing minimising spill light from the reflector lamp. 70 25 65 38 50 355 90 60 Black 72375 72375 ME 72375 EB 12v 20W - 50W OR 4W - 10W LED 12v 20W - 50W OR 4W - 10W LED 12v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer. Spotlight with Electronic three circuit track adaptor, with integral electronic transformer. To be used on Series 25 Track. Spotlight with integral electronic transformer in the base. 72375 FM 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer. 72375 ET 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor, for BT Track, with integral electronic transformer. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 77

12V SPOTLIGHTS IP10 SHOOTER is an adjustable spotlight in pressure die-cast aluminium with powdercoat paint finish. The Shooter features a mesh for ventilation on the back of the housing which allows easy heat dissipation. 75 25 60 75 355 180 60 Black 72712 12v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer. 72712 ME 12v 20W - 50W OR 4W - 10W LED Spotlight with Electronic three circuit track adaptor and integral electronic transformer. To be used on Series 25 Track. 72712 EB 12v 20W - 50W OR 4W - 10W LED Spotlight with integral electronic transformer in the base. 72712 FM 72712 ET 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer. 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor and integral electronic transformer. 78 MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION.

12V SPOTLIGHTS IP10 KUBE spotlight with ventilated housing and mesh enable flow through heat dissipation. The Kube is produced in pressure die-cast aluminium with powdercoat paint finish. 75 25 60 75 355 180 60 Black 72721 12v 20W - 50W OR 4W - 10W LED Surface mount spotlight requiring remote transformer. 72721 ME 12v 20W - 50W OR 4W - 10W LED Spotlight with Electronic three circuit track adaptor and integral electronic transformer. To be used on Series 25 Track. 72721 EB 12v 20W - 50W OR 4W - 10W LED Spotlight with integral electronic transformer in the base. 72721 FM 72721 ET 12v 20W - 50W OR 4W - 10W LED Spotlight with flush base requiring remote transformer. 12v 20W - 50W OR 4W - 10W LED Spotlight with electronic single circuit track adaptor and integral electronic transformer. MR16 LED LAMPS CAN BE USED IN PLACE OF THE MR16 HALOGEN LAMPS FOR LONGER LIFE AND REDUCED POWER CONSUMPTION. 79

NORWEST PRIVATE HOSPITAL, BELLA VISTA NSW

FLUORESCENT LIGHTING 81 85

FLUORESCENT DOWNLIGHTS ASTRO & ASTRO MAXI recessed downlights provide a comprehensive range of reflector and lamp solutions to suit most applications. Their unique design allows for compact sizing with easy installation and relamping, made simple due to the tiltable lampholder module with remote gear set. The main body is formed in moulded polycarbonate with painted steel framework and high purity aluminium reflectors with various finishes. Glass accessories and dimming control gear options extend their versatility for use in offices, corridors, foyers and retail environments. ASTRO ASTRO MAXI 110 185 Control Gear 200 x 110 46 130 225 Control Gear 200 x 110 46 170 210 AS - 213-240v 2x13W PLC G24q-1 ASM - 218-240v 2x18W PLC G24d-1 AS - 118-240v 1x18W PLC G24q-2 ASM - 126-240v 1x26W PLC G24q-3 AS - 218-240v 2x18W PLC G24q-2 Downlight with remote electronic control gear. ADD SUFFIX FOR REFLECTOR OPTION : FR IP54 LGL MR MTR VLGB ASM - 226-240v 2x26W PLC G24d-2 Downlight with remote electronic control gear. ADD SUFFIX FOR REFLECTOR OPTION : FR IP54 LGL MR MTR VLGB ASM - 232-240v 2x32W PLT G24q-3 ASM - 242-240v 2x42W PLT G24q-4 Downlight with remote electronic control gear. ADD SUFFIX FOR REFLECTOR OPTION : FR IP54 LGL MR MTR VLGB 82 CONTROL GEAR OPTIONS FOR BOTH ASTRO AND ASTRO MAXI ADD SUFFIX : - AD Analogue dimming DSI Digital dimming DALI Addressable dimming EM Remote emergency pack for one lamp

FLUORESCENT DOWNLIGHTS STAINLESS STEEL CLIPS MAKE IT EASY TO INSTALL GLASS DIFFUSERS AND ALLOW FOR DIFFUSER TO BE INSTALLED AFTER THE FIXTURE HAS BEEN FITTED. FR FACETED REFLECTOR WITH SPECULAR FINISH. IP54 FROST GLASS WITH SILICONE SEAL & TRIM. TILTABLE LAMPHOLDER FOR EASY RELAMPING LGL WHITE LOUVRE FOR LOW GLARE LIGHTING. MR MIRROR REFLECTOR. REMOTE GEAR SET MTR MATT REFLECTOR FOR SOFT ILLUMINATION. VLGB BAFFLE WITH IP44 DIFFUSER. GLASS ACCESSORIES FOR ASTRO & ASTRO MAXI A variety of glass accessories are available for light diffusion, for a decorative effect or for IP rating. Glasses are able to be installed flat to the trim or as a floating glass by means of 3 strainless steel spring clips supplied with each glass accessory. ASTRO ASTRO MAXI IP44 IP20 74044A 157mm Frost Glass IP44 74044B 157mm Prismatic Glass IP44 ASTRO 74037A 181mm Frost Glass IP20 74037B 181mm Prismatic Glass IP20 74164A 197mm Frost Glass IP44 74164B 197mm Prismatic Glass IP44 ASTRO MAXI 74156A 220mm Frost Glass IP20 74156B 220mm Prismatic Glass IP20 83

FLUORESCENT DOWNLIGHTS IP20 ASTERIX recessed miniature downlights utilise compact flourescent lamps to provide ambient lighting into interiors where energy conservation is a major criteria. Available in two sizes; both with faceted aluminium reflectors to optimise efficiency. 140 140 146 140 98 125 85 97 71015 240v 13W PLT-E GX24q-1 Recessed, non dimmable downlight with integral electronic ballast. 71018 240v 18W PLT-E GX24q-2 Recessed, non dimmable downlight with integral electronic ballast. IP65 FIX recessed miniature downlight use compact fluorescent lamps. The trim is manufactured from precision cast alloy, whilst the steel housing is powdercoated black. Ventilation holes allow for rapid heat dissipation. Features: 71021 Square edge twist and lock trim Decorative glass accessories Integral electronic ballast High output reflector Easy two spring installation Supplied with power cord Outer black cover 240V 1 x 18w PLT-E Gx24q-2 Recessed downlight with integral electronic non dimmable ballast. 71027 175 110 145 240V 1 x 18w PLT-E Gx24q-2 Recessed downlight with integral electronic non dimmable ballast and feature glass ring. 71024 IP65 IP65 SPRING SYSTEM FOR UP TO 25MM CEILING THICKNESS. 240V 1 x 18w PLT-E Gx24q-2 IP65 VERSION IS IDEAL FOR USE IN WET AREAS, BATHROOMS, UNDER AWNINGS AND FOOD PREPERATION AREAS. 92 Brushed Chrome Recessed downlight with integral electronic non dimmable ballast. Tempered frosted glass lens and sillicone rubber seal with IP65 protection. 84

FLUORESCENT DOWNLIGHTS IP44 Asymmetrical wall washer designed to provide a wide and uniform coverage from top to bottom. This fitting is manufactured from die-cast aluminium and finished in durable polyester powdercoat finish. Reflectors are made of 99.98% pure aluminium which are anodised clear. 205 230 HIGH EFFICIENCY ALUMINIUM MIRROR REFLECTOR 222 74031 240V 2x18W PLC-E G24q-2 Recessed downlight wall washer type with plain mirror reflector and clear tempered glass and remote HF electronic control gear. 74032 240V 2x26W PLC-E G24q-3 Recessed downlight wall washer type with plain mirror reflector and clear tempered glass and remote HF electronic control gear. IP43 PIATTA recessed downlights featuring frost glass diffuser and specular trim reflectors for low glare and wide light distribution. Bezel formed in precision die-cast aluminium with powdercoat paint finish and steel frame. Pressed aluminium reflectors with silver metalized coating for high reflectivity. 74858 240V 2x13W PLC G24d-1 13W Downlight with remote magnetic control gear. Add suffix HF for electronic control gear option. 155 190 74860 240V 2x18W PLC G24d-2 18W Downlight with remote magnetic control gear. Add suffix HF for electronic control gear option. 170x170 85

SEAFOLLY - NSW AUSTRALIA

TRACK LIGHTING

HUNT LEATHER - QLD 88

TRACK LIGHTING IP20 SERIES 25 three circuit track for surface mounting or suspended applications. Can be cut to length on site without any special tools. Extruded aluminium profile Powdercoat paint Three separately switchable circuits Flat copper conductors 2.5mm2 Pre punched holes for direct fixing 2 holes per metre SERIES 25 TRACK 25-7024 25-7079 32 32 68 36 44 240v 16A Live end with left hand earth contact. Can be made right hand on site by reversing tag. 105 105 240v 16A L coupler can be used for power feed. 36 25-7035 25-7030 240v 16A : Black: : V D E End cap with locking screw. 240v 16A T coupler can be used for power feed. 25-7101 25-7105 25-7110 1000mm 25-7201 25-7205 25-7210 2000mm 25-7301 1200 25-7305 Suspension components 25-7310 3000mm 25-7906 Rod 1200mm 25-7318 2mm Stainless Steel Wire 2000mm Long Gripple Loop 25-7075 Mounting clip for 7906 and 7318 36 50 25-7075 19 25 58 25-7037 240v 16A Electrical coupler. 25-7078 240v 16A Straight coupler, can be used for power feed. 172 172 25-7031 240v 16A X coupler can be used for power feed. 25-7033 240v 16A Flexible coupler. Black Black 89

TRACK LIGHTING IP20 LUXOR is a professional projector made from die-cast and extruded aluminium with ventilated rear cover. Fully adjustable, the Luxor can be 3-circuit track mounted or surface mounted. Integral electronic control gear for metal halide lamps with ventilated rear cover and twist off front cap allows for easy relamping. The Luxor features a recessed lamp position for low glare effect. REFLECTOR ANGLES AVAILABLE 24º 45º 360 Black 73664 MA 73666 MA 240v 35W CDM-T G12 240v 70W CDM-T G12 Spotlight with three circuit track adaptor and integral electronic control gear. Supplied with 45º reflector as standard. Spotlight with three circuit track adaptor and integral electronic control gear. Supplied with 45º reflector as standard. 220 ADD SUFFIX SM FOR SURFACE MOUNT. ADD SUFFIX SM FOR SURFACE MOUNT. 125 285 IP20 TELUX Manufactured from die-cast aluminium alloy and extruded ed aluminium gearbox with ventilation. Features include: Built-in electronic control gear Pure aluminium reflectors with choice of beam angles Available for surface mount or three circuit track mount applicationsplications Fully adjustable and 355 rotation 77809 240v 20W CDM-TC G8.5 Track mounted with 45 reflector Add suffix SM for surface mount 45 135 310 90 355 Black 77811 77815 240v 35W CDM-TC G8.5 240v 70W CDM-TC G8.5 Track mounted with 45 reflector Add suffix SM for surface mount. Track mounted with 45 reflector Add suffix SM for surface mount. 45 45 285 90

TRACK LIGHTING IP20 IP20 ACCENT is manufactured from die-cast aluminium alloy and aluminium gearbox which is oriented in a horizontal position for rapid ventilation. Features include: Built-in electronic control gear Pure aluminium reflectors Available for three circuit track or surface mount Fully adjustable and 355 rotation CITY spotlight features modern styling and a retractable lamp support ring. Manufactured from pressure die-cast aluminium. The City features a lamp support ring on an adjustable arm. 232 212 106 208 105 185 90 355 Black 90 355 Black 77829 73252 240v 20W CDM-TC G8.5 240v 75W PAR30 Track mounted with 45 reflector 77831 240v 35W CDM-TC G8.5 Track mounted with 45 reflector 77835 240v 70W CDM-TC G8.5 Track mounted with 45 reflector 45 45 45 73253 240v 120W PAR38 Spotlight with three circuit track adaptor. COLOUR AND FINISH OPTIONS THIS MODEL CAN TAKE LED LAMP OPTION. 91

TRACK LIGHTING VOLTIX is a fully adjustable spot light manufactured from die-cast aluminium. Supplied with built in electronic control gear housed in a ventilated gear box, the Voltix is constructed of extruded aluminium. The pure aluminium reflector can be coupled with a variety of lamps. Add suffix SM for surface mounted. IP43 IP43 IP20 170 200 200 85 116 116 160 196 196 360 Black 360 Black 360 Black 45 60º 77837 240v 20W CDM-TC G8.5 77842 240v 26W PLT-E G24q-3 77846 240v 20W CDM-R111 Gx8.5 77838 77843 240v 35W CDM-TC G8.5 240v 32W PLT-E G24q-3 77839 240v 70W CDM-TC G8.5 Complete with integral electronic control gear and 3 circuit track adaptor 77847 240v 35W CDM-R111 Gx8.5 77844 77848 240v 42W PLT-E G24q-4 240v 70W CDM-R111 Gx8.5 Complete with integral electronic control gear and 3 circuit track adaptor Complete with integral electronic control gear and 3 circuit track adaptor 92

ROCKPORT - CHATSWOOD NSW 93

NAVY MUSEUM - NSW AUSTRALIA

EXTERIOR LIGHTING

EXTERIOR LIGHTING IP65 ZENTA EURO is a range of exterior spotlight featuring square modern design lines and flush fitting glass lenses. Manufactured using machined aluminium alloy with a bright anodised finish for durability. The Zenta features a lamp retaining clip, silicone sealed glass and retained ring seal allow for easy lamp replacement. Available in two options; 12v remote transformer or with integrated 240v encapsulated transformer. Machined aluminium alloy construction Tempered glass cover Temperature resistant silicone seals. Twisted off front for easy lamp replacement. 133 205 133 85 77 62 77 150 77 62 85 62 BRIGHT ANODISED FINISH AND FLUSH GLASS Anodised BRIGHT ANODISED FINISH AND FLUSH GLASS 90 Anodised BRIGHT ANODISED FINISH AND FLUSH GLASS Anodised 755036BT EURO 12v 20W to 50W Wall mounted downlight with integral magnetic transformer. Dimmable. 755035BT EURO 12v 20W to 50W Tilt adjustable spotlight with integral magnetic transformer. Dimmable 755034BT EURO 12v 2 x 20W Wall mounted up/downlight with integral magnetic transformer. Dimmable. 85 62 98 77 755036 EURO 12v 20W to 50W Wall mounted downlight requiring remote transformer. 62 85 155 90 77 755035 EURO 12v 20W to 50W Tilt adjustable spotlight requiring remote transformer. Anodised 133 150 77 62 755034 EURO 12v 2 x 20W Wall mounted up/downlight requiring remote transformer. 62 85 216 755031 EURO 12v 20W to 50W Tilt adjustable spotlight with ground spike. 90 Anodised 96

EXTERIOR LIGHTING IP65 UDON is a wall mounted combination up-downlighter. Rated IP65 for exterior use. Constructed in die-cast aluminium alloy with polyester powdercoat paint protection. The Udon features frosted tempered glass with silicone seals and stainless steel fasteners. FUTON is an internal or external up/down light with frosted tempered glass diffuser. ZENTA internal or external wall light with up/down light distribution is manufactured from die-cast aluminium. The base and front square tube can swivel at 90 to one another. IP65 IP65 IP65 80 50 250 140 210 135 80 130 110 55 62 50 755450 12v 2x20W to 50W Wall mounted fixture requiring remote transformer. 755451 240v - 12v 2x20W Wall mounted fixture with integral 60VA dimmable electronic transformer Black 755440 755453 240v 25W to 75W G9 240v - 12v 2x20W Suitable for economical dimming. Black Wall mounted fixture with integral 60VA electronic dimmable transformer. 755452 240v 2x50W GU10 Wall mounted fixture with up/down distribution. Can also be used with7w-11w ES fluoro lamps. 160 100 80 160 711821 240V 100W Rx7s 710521 240V 13W PLC Wall mounted for up lighting. 711822 240V 100W Rx7s 710522 240V 13W PLC Wall mounted for up/down lighting. IP54 ZELDA compact wall fixture can be used for direct and indirect illumination effects. A wide distribution is achieved using a clear tempered glass cover. Housing and back plate is formed in pressure die-cast aluminium with polyester powdercoat paint finish. Silicone seals provide IP54 weather protection. Black 97

EXTERIOR LIGHTING IP55 TEMPO ONE is a wall mounted downlight engineered in steel and die-cast aluminium with a durable powdercoat paint finish and a tempered glass cover, stainless steel screws and silicone gaskets. The Tempo One can be inverted and used for indirect illumination. Reflectors in 99.9% pure aluminum. 75239 240v 1x32W PLT-E G24q-3 75243 240v 1x42W PLT-E G24q-4 With integral electronic control gear. 75236 240V 35W G12 MH 75238 240V 70W G12 MH 247 222 350 75246 240V 150W G12 MH 75292 240v 70W HPS-E E27 Wall mounted downlight with integral electronic control gear. Black IP55 TEMPO TWO is a wall mounted fixture with bi-directional distribution using energy saving high output lamps. Reflectors at high purity anodised aluminium sealed behind a tempered glass lense that is IP55 rated. Tempo Two is constructed in pressure die-cast aluminium and steel with a durable powdercoat paint finish, with stainless steel fasteners. 75229 240v 2x26W G24q-3 electronic PLT 75222 240v 2x32W G24q-3 electronic PLT 75225 240v 2x42W G24q-4 electronic PLT With integral electronic control gear. 75240 240V 2x35W G12 MH 75252 240V 2x70W G12 MH 247 222 502 Wall mounted up-downlight with wide beam distribution and integral electronic control gear. Black 98

EXTERIOR LIGHTING IP55 SYNCRO is a wall mounted fixture with upward and downward illumination. Constructed in pressure die-cast aluminium with extruded aluminium body and durable powdercoat paint finish. The Syncro features removable end caps with clear tempered glass lenses that allow for easy lamp replacement, silicone seals for durability and exposed stainless steel fasteners and IP55 protection. Integral aluminium reflectors can be used with standard incandescent halogen lamps for wide distribution or sealed reflector lamp combination for narrow beam distribution. 75200 240V 2x75W E27 75203 240V 2x75W PAR30 E27 75204 240V 2x18W PLC-E G24q-2 360 75205 240V 2x20W CDM-TC G8.5 METAL HALIDE Wall mount up and downlighter with diffused reflectors and electronic gear. 130 Black IP55 SYNCRO-D wall mount fixture with optional downward illumination or up and down throw. The Syncro-D is constructed in pressure die-cast aluminium and extruded aluminium body with clear tempered glass covers and silicone seals. 75206 240v 1x20W CDM-TC G8.5 METAL HALIDE 75207 240v 1x18W PLC-E G24q-2 75208 240v 1x26W PLC-E G24q-3 Wall mount down light with integral electronic control gear. 75209 240v 75W E27 ALSO AVAILABLE AS A CEILING MOUNT VERSION AND IN 20W LED 130 225 Black 99

EXTERIOR LIGHTING IP54 IP55 COLUMBINE is a surface mounted downlight with an IP55 rating. Engineered from steel and pressure die-cast aluminium then finished in durable powdercoat paint finish. The Columbine features a sealed tempered glass lens, exposed stainless steel fasteners and 99.9% pure aluminium reflectors. The Columbine also features a modular control gear and lampholder assembly for easy installation. TOMMASO wall mounted fixture available with optional one way or two way distribution in combination with various compact lamp types. Constructed from pressure die-cast aluminium with pretreatment and durable polyester powdercoat paint finish. The Tommaso features a tempered glass diffuser with silicone seals to provide IP54 weather protection. 305 172 190 100 72 110 205 300 100 72 60 Black Black 75234 240v 35W G12 75237 240v 70W G12 7691621 240v 2x26W G24d-3 With integral magnetic control gear. 75245 240v 150W G12 With integral electronic control gear. 75221 240v 1x32W PLT-E G24q-3 electronic 75223 240v 1x42W PLT-E G24q-4 electronic With integral electronic control gear. 7691622 240v 2x26W R7s G24d-3 With integral magnetic control gear. 100

EXTERIOR LIGHTING IP65 MOLO surface mount wall light with integral control gear for either direct or indirect illumination of building facades and architectural features is constructed using pressure die-cast aluminium with a durable powdercoat paint finish and a tempered glass lens with silicone seal, providing IP65 protection. Unique mounting bracket ensures the fitting remains flush to the wall with surface and cable entry glands facilitating ease of installation. IP65 280 280 280 NOTE: ALL VARIATIONS ARE COMPLETE WITH INTEGRAL ELECTRONIC CONTROL GEAR, UNLESS SPECIFIED. Black 75864 240v 35W CDM-T G12 75877 240v 70W HQI-E E27 75872 240v 32W PLT G24q-4 electronic 75866 240v 70W CDM-T G12 Wall light with medium beam distribution. 75878 75874 240v 100W HQI-E E27 240v 42W PLT G24q-4 electronic 75870 240v 26W PLC G24d-3 IP65 DOCK BOX wall mounted fixture providing illumination for large areas such as industrial premises and loading docks. Pressure die-cast aluminium housing with prismatic tempered glass lens, silicone housing seals with 4 cable and conduit entry points, finished with a durable powdercoat and stainless steel fasteners. 75910 240v 2x42W PLT-E G24q-4 Wall mount fixture with integral electronic control gear. 75911 240v 70W HQI-E E27 75912 240v 70W HPS-E E27 Wall mount fixture with integral magnetic control gear. ADD SUFFIX: HF for electronic gear. 225 327 185 IP65 ALSO AVAILABLE IN 30W LED 3000K & 4000K 40W LED 3000K & 4000K Black 101

EXTERIOR LIGHTING IP65 PAT are a series of surface mounted exterior fittings suitable for use on walls or ceilings. Constructed in pressure die-cast aluminium alloy providing definition to the luminaires shape and form. The multistage finishing process includes a phosphocromation pre treatment to the raw castings and ends with a polyester powdercoat paint finish for superior corrosion resistance. Diffusers are moulded in impact resistant opal polycarbonate; an expanded silicone rubber seal between the diffuser and body provides weather protection to IP65, while all exposed fasteners are in marine grade stainless steel. 270 110 PROTECTION AGAINST IMPACT IK 09-10,00 JOULE EN 50102 COMPACT FLUORESCENT VERSIONS ARE SUPPLIED WITH INTEGRAL MAGNETIC CONTROL GEAR. Black 7430123 7430107 7430110 240V 70W E27 240V 70W E27 240V 70W E27 7430423 7430407 7430410 240V 2x9W G23 240V 2x9W G23 240V 2x9W G23 7430623 7430607 7430610 240V 2x13W G24d-2 7430823 240V 2x18W G24d-3 240V 2x13W G24d-1 7430807 240V 2x18W G24d-2 240V 2x13W G24d-1 7430810 240V 2x18W G24d-3 102 ADD SUFFIX: HF for electronic ballast. ALSO AVAILABLE IN AS 20W LED 3000K & 4000K

EXTERIOR LIGHTING IP54 SAM are a series of surface mount exterior wall fittings or ceilings, featuring lamp visors to provide directional lighting and reduced glare. Each design offers a moulded polycarbonate diffuser with opal finish in conjunction with an expanded silicone seal to provide IP54 weather protection. Housings and trims are formed using pressure die-cast aluminium which is pretreated with phosphocromation prior to applying a polyester powdercoat paint finish which is available in three colour options. Exposed fasteners are in stainless steel and flourescent versions have a specular aluminium gear tray module for easy installation. 150 110 260 260 PROTECTION AGAINST IMPACT COMPACT FLUORESCENT VERSIONS ARE SUPPLIED WITH INTEGRAL MAGNETIC CONTROL GEAR. Black 7520123 7520110 7520107 7520137 240V 42W E27 240V 42W E27 240V 42W E27 240V 42W E27 7520423 240V 2x9W 7520410 240V 2x9W 7520407 240V 2x9W 7520437 240V 2x9W 103

EXTERIOR LIGHTING IP65 CANTO is an exterior wall or ceiling mounted fitting. Constructed in pressure die-cast aluminium alloy. The Canto features a polyester powdercoat paint finished for excellent corrosion resistance and an opalised diffuser in polycarbonate with silicone rubber seals, exposed fasteners in stainless steel, with integral standard ballast and switch start control gear. Add suffix HF to order code for electronic ballast. LUNAR utility light with reinforced nylon body and opal polycarbonate diffuser. Features: Anti corrosion housing Aluminium internal reflector Silicone seal for diffuser Optional lamp types Wall or ceiling mount Stainless steel screws 325 105 95 90 270 280 150 PROTECTION AGAINST IMPACT Black PROTECTION AGAINST IMPACT RUST Black 7614860 240V 2x11W PL G23 76186 240V 42W E27 76187 240V 42W E27 7614861 240V 2x18W G24d--2 76189 240V 2x9W PL G23 76188 240V 2x9W PL G23 7614863 240V 2x26 G24d-3 Utility light with integral magnetic control gear. Utility light with integral magnetic control gear. ALSO AVAILABLE AS E27 WITH AN INTERNAL MOTION SENSOR IP65 PROTECTION AGAINST IMPACT Black MAXI PAT exterior fixture features a pressure die-cast aluminium housing and trim supporting the opal polycarbonate diffuser and integral silicone seal providing an IP65 protection rating. Can be ceiling or wall mounted. 7440123 240V 70W E27 7441622 240V 2x18W G24d-3 With integral magnetic control gear. 7441623 240V 2x26W G24d-3 380 120 With integral magnetic control gear. 104 ADD SUFFIX:- HF Electronic Ballast.

EXTERIOR LIGHTING IP65 MAXIMUS wall mounted fixtures feature heavy duty housings formed in pressure die-cast aluminium with durable powdercoat paint finish. Maximus is available in three styles each with opalised polycarbonate diffusers and integral control gear for energy saving lamps. 363 363 130 PROTECTION AGAINST IMPACT Black 76200 240V 2x42W E27 76210 240V 2x42W E27 76230 240V 2x42W E27 76206 240V 2x26W G24q-3 76216 240V 2x26W G24q-3 76236 240V 2x26W 76207 240V 70W HQI-E Fixture with open face and integral electronic gear. 76217 240V 70W HQI-E Fixture with cross guard and integral electronic gear. 76237 240V 70W HQI-E Fixture with eyelid cover and integral electronic gear. 105

EXTERIOR LIGHTING IP65 TOP is a surface mounted luminaire that features a translucent base that creates a halo of light on the ceiling or wall. A prismatic opal glass lens provides soft illumination and is held in a moulded polycarbonate trim with twist action for easy relamping. The mounted base provides an expanded silicone seal giving IP65 weather protection along with a cable entry gland. Fluorescent version utilises electronic circuitry for optimum performance. 90 370 RUST Black 75700 75704 75708 240V 70W E27 240V 70W E27 240V 70W E27 75712 240V 70W E27 75702 75706 240V 2x26W electronic G24q-3 Fitting with clear base and electronic ballast Fitting with red translucent base and electronic ballast 75710 Fitting with blue translucent base and electronic ballast 75714 240V 2x26W electronic G24q-3 240V 2x26W electronic G24q-3 240V 2x26W electronic G24q-3 Fitting with amber translucent base and electronic ballast IP65 FORTE recessed wall light with downward distribution to illuminate floors and pathways with no glare. Manufactured from aluminium die-cast alloy Tempered glass in prismatic diffuse Powdercoated finish in acid clean and polyester paint baked at 180 C Silicone seal with stainless steel fasteners Integral control gear. Moulded installation well supplied with each fitting LED version for no maintenance, energy saving and up to 50,000 hours lifespan. 143 270 93 MOULDED INSTALLATION WELL SUPPLIED WITH EACH FITTING. 135x260 135x260 77820 240V 18W G24d-2 77822 240V 26W G24d-3 Recessed wall light with integral magnetic ballast circuit. Black 71190 6.6W Hi-Power LED 350mA Recessed wall light with frost glass and integral 240v input 350mA driver. LED available in: 3000K with total 680 lumens output 4000K with total 730 lumens output 106

EXTERIOR LIGHTING IP65 APPLIQUE SERIES of surface mount fittings in a range of lamp options. Die-cast aluminium housings Durable powdercoat paint finish Tempered frost glass covers Silicone rubber gaskets Stainless steel fastener details Internal aluminium reflector Integral magnetic control gear where required IP65 140 140 140 85 275 85 275 85 275 Black 71841 240V 26W PL-C G24d-3 71847 240V 26W PL-C G24d-3 71851 240V 26W PL-C G24d-3 71842 240V 18W PL-L 2G11 71848 240V 18W PL-L 2G11 71852 240V 18W PL-L 2G11 71855 240V 42W E27 71856 240V 42W E27 71854 240V 42W E27 RUST Polycarbonate body 71872 MOULDED INSTALLATION WELL SUPPLIED WITH EACH FITTING. Black 240V 18W PL-L 2G11 Recessed wall light with open glass diffuser. 75 290 95 110 305 100 Polycarbonate body 71876 240V 18W PL-L 2G11 Recessed wall light with louvred facia. IP65 EUROPA recessed wall lights feature a moulded corrosion resistant polycarbonate housings. Utilising low energy compact flourescent lamps with integral magnetic control gear and aluminium reflectors. The Europa features an optional open or louvred tempered glass lens with diffuse finish and expanded neoprene rubber gasket with stainless steel fasteners. IP65 107

EXTERIOR LIGHTING IP65 VOLCANO is a series of recessed downlights for medium wattage energy saving lamps. Featuring a fully enclosed housing made from die-cast aluminium with silicone seals and cable gland to provide IP65 protection and clear tempered glass cover. Finished in black powdercoat paint; the main body has raised fins to facilitate heat dissipation and three adjustable ceiling clamps for positive retention. Supplied with 1.5m of silicone cable for connection to the power supply or remote control gear. IP65 VOLCANO MINI is fully enclosed downlight with IP65 rating from all directions for use in exposed areas and to eliminate the ingress of insects and moisture. Constructed in die-cast aluminium with black powdercoat paint finish and cable entry gland. Supplied with 1.5m silicone flex for connection to power supply or remote control gear. Front trim holds tempered glass cover with durable silicone seals and is easily removed for installation and relamping. Unique adjustable clamps provide positive ceiling retention, for ceilings up to 35mm thick. Available in a series of lamp options ranging from halogen reflector lamps through energy saving flourescent and compact metal halide with ceramic technology. 200 220 ONE PIECE HOUSING IN PRESSURE DIE-CAST ALUMINIUM ALLOY. ADJUSTABLE CEILING CLAMPS FOR CEILINGS UP TO 35MM THICK. 135 140 ONE PIECE HOUSING IN PRESSURE DIE-CAST ALUMINIUM ALLOY WITH RAISED FINS AS HEAT SINK. ADJUSTABLE CEILING CLAMPS FOR CEILINGS UP TO 35MM THICK. ALSO AVAILABLE AS A 13W 180 AND 18W LED DOWNLIGHT. 120 75676 240V 26W G24q-3 PLT-E 75690 75693 240V 35W CDM-T G12 240V 20W CDM-TC G8.5 75680 75692 240V 42W G24q-4 PLT-E 240V 70W CDM-T G12 Downlight with remote electronic ballast box. 75683 240V 100W PAR38 E27 Downlight for 240v direct connection. Downlight supplied with remote electronic control gear. 75694 240V 35W CDM-TC G8.5 75672 240V 13W G24q-1 PLT-E Downlight supplied with remote electronic ballast box. IP65 108 FUZE TWO medium size general floodlight with wide beam distribution from a specular reflector with stippled pattern. Features: High purity aluminium reflector Integral control gear for both metal halide and high pressure sodium lamps. Housing in pressure die-cast aluminium Durable polyester powdercoat paint finish Stainless steel fasteners Silicone rubber seals 185 295 755247 240V 70W Rx7s 755249 240V 150W Rx7s 210 Black HPS-TS HQI-TS HPS-TS HQI-TS Surface mount tilt adjustable floodlight with integral magnetic control gear.

EXTERIOR LIGHTING IP55 IP55 MEKO is post light with louvered optics to minimise visual glare and provide sideways light distribution. Features: Main shaft manufactured from extruded heavy duty aluminium Die-cast base and top from aluminium alloy Durable polyester powdercoat finish Polycaronate diffuser 99.8% pure aluminium louvre optics BOLO is a post light bollard with louvered optics to eliminate visual glare and provide sideways light distribution. Features: Manufactured from extruded and die-cast aluminium alloy Durable polyester powdercoat finish Silicone seals Stainless steel fasteners Variety of energy saving lamp options Stainless steel fasteners 170 170 1000 1000 236 236 Black Black 753347 240V E27 42W Bollard without control gear can be used with a variety of energy saving lamps 753348 240V 26W PLC G24d-3 Fluoro Bollard with integral magnetic control gear. 753349 240V 42W PLT-E G24q-4 Fluoro Bollard with integral electronic control gear. 753351 240V 70W HQI-E E27 Bollard with integral magnetic control gear. 755355 240V E27 42W Bollard without control gear can be used with a variety of energy saving lamps 755356 240V 26W PLC G24d-3 Bollard with integral magnetic control gear. 755357 240V 42W PLT-E G24q-4 Bollard with integral electronic control gear. 755360 240V 70W HQI-E E27 Fluoro Fluoro Bollard with integral magnetic control gear. 109

EXTERIOR LIGHTING IP65 ELAN & MAXI ELAN are asymmetrical distribution floodlights with specular patterned aluminium reflectors ideal for illuminating vertical facades and signage. Their compact slim design houses integral control gear with a hinged cover for easy lamp access and maintenance. Supplied with a clear tempered glass lens or optional colour filters for the Elan for added effects. Constructed in pressure die-cast aluminium with durable powdercoat paint finish and PG9 cable gland. The Elan is IP65 rated and features exposed stainless steel fasteners. ELAN MAXI ELAN 83 230 150 420 406 350 660 605 125 SAIL AREA FOR WINDAGE 0.08M 2. MAX WEIGHT 7KG 270 Black SAIL AREA FOR WINDAGE 0.25M 2. MAX WEIGHT: 755250-16KG 755400-17.5KG 270 Black 755570 240v 70W Rx7s HPS-TS HQI-TS 755250 240v 250W HQI-T E40 755150 240v 150W Rx7s HPS-TS HQI-TS 755400 240v 400W HQI-T E40 ELAN surface mount floodlight with asymmetrical distribution and integral magnetic control gear. MAXI-ELAN surface mount floodlight with asymmetrical distribution and integral magnetic control gear. Options Accessories OPTIONAL UPLIGHT MOUNTING BRACKET 7555 UB 7554 UB Black Suits 755570 or 755150 only. Suits 755250 or 755400 only. 140 185 380 7555 UB 235 260 7554 UB 455 30 20 30 20 RANGE OF OPTIONAL DICHROIC COLOUR FILTER GLASSES FOR 755570 & 755150 ONLY. 7556 Frost 7557 Red 7558 Blue 7559 Green 7560 Yellow LOUVRE ACCESSORY Black 110

EXTERIOR LIGHTING IP65 FYZZ is a series of spot and floodlights for illuminating architectural features, facades and signage. Fyzz s dual stage housing thermally isolates the lamp head from the control gear for optimum performance. High purity anodised aluminium reflectors provide three distribution options, when using energy saving metal halide lamps for superior colour rendering and efficacy. The face is frame with a tempered glass lens while a silicone seal can accomodate dichroic filter accessories for extra colour effects. PG9 cable entry gland provides IP65 weather protection, whilst its body constructed in pressure diecast aluminium and durable powdercoat paint finish with exposed stainless steel fasteners, facilitates this protection. IP65 ALSO AVAILABLE AS 30W LED WITH 2470 LUMENS. 187 310 RANGE OF OPTIONAL DICHROIC COLOUR FILTER GLASSES. 7376 Frost 7377 Red 7378 Blue 7379 Green 7380 Yellow SAIL AREA FOR WINDAGE 0.08M 2 MAX WEIGHT 7KG 270 Black 78316 240v 35W G12 78326 240v 35W G12 78336 240v 35W G12 78317 240v 70W G12 78327 240v 70W G12 78337 240v 70W G12 78318 240v 150W G12 Spotlight with 8 narrow beam and integral magnetic control gear. 75736 240v 20W CDM-TC G8.5 75737 240v 35W CDM-TC G8.5 75738 240v 70W CDM-TC G8.5 Spotlight with integral electronic gear. Supplied as standard with reflector of 54 flood beam angle. 175 190 78328 240v 150W G12 Spotlight with 32 medium beam and integral magnetic control gear. OTHER REFLECTORS AVAILABLE WITH: 18 NARROW BEAM 160 304 MEDIUM BEAM Black 78338 240v 150W G12 Spotlight with 60 wide beam and integral magnetic control gear. IP65 VINTA external floodlight for accent or signage lighting. Features: Manufactured from die-cast aluminium alloy Corrosion resistant powdercoat finish with pre-treated polyester powder Tempered clear glass Stainless steel fasteners Silicone seals 99.8% pure aluminium reflector with low glare and 85% reflection rate Integral control gear IP65 IES FILES AVAILABLE ON REQUEST. 111

INDEX LED RANGE METAL HALIDE PENDANTS 12V DOWNLIGHTS/SPOT 7890 45 71007 08 71008 11 71010 42 71011 42 71055 10 71056 10 71057 09 71057-2 09 71057-3 09 71058 28 71065 23 71066 10 71067 23 71075 34 71077 11 71078 37 71079 37 71080 22 71080-2 22 71083 34 71084 36 71088 19 71089 20 71090 19 71091 20 71094 08 71095 08 71098 30 71099 33 71100 31 71102 16 71115 32 71150 26 71155 26 71157 26 71167 38,39,42 71168 39 71169 43 71173 38 71174 38 71175 39 71176 39 71178 39 71179 39 71180 39 71185 45 71187 39 71188 39 71190 44,106 71192 14 71193 13 71194 13 71195 12 71196 12 71199 15 71201 43 71202 43 71203 43 71265 41 71266 41 71267 41 71268 41 71271 41 71272 41 71592 25 72744 45 72745 45 7300069 47 7300070 47 7300071 47 7910022 46 7910023 46 7910024 46 7910025 46 7910026 46 7910030 46 7910032 47 7910038 47 7910039 47 72151 59 72152 59 72153 59 72181 58 72182 58 72183 58 72184 58 73135 55 73137 55 73138 55 73140 55 73143 56 73146 56 73147 56 73150 56 73190 55 73197 55 73201 55 73981 60 73982 60 73983 60 73993 56 73997 56 74001 56 74322 53 74324 53 74812 57 74837 57 74845 57 79325 50 79326 50 79350 50 79351 50 79357 51 OC32-F42-WII 65 OC32-C70-WII 65 OC32-C15-WII 65 7283 65 7284 64 7284 65 72830 65 72837 65 72840 65 72842 65 73840 64 73841 64 73842 64 73843 64 73844 64 73845 64 73846 64 73848 64 73850 64 73851 64 73855 64 7248 69 72190 70 72197 70 72198 70 72199 70 72216 73 72217 73 72251 74 72261 74 72262 74 72263 74 72270 71 72271 71 72280 73 72285 73 72300 68 72312 68 72313 68 72372 76 72372 ME 76 72372 EB 76 72372 FM 76 72372 ET 76 72375 77 72375 ME 77 72375 EB 77 72375 FM 77 72375 ET 77 72433 68 72435 68 72466 68 72469 69 72479 69 72480 69 72481 69 72584 72 72712 78 72712 ME 78 72712 EB 78 72712 FM 78 72712 ET 78 72721 79 72721 ME 79 72721 EB 79 72721 FM 79 72721 ET 79 72805 69 72934 72 72994 72 72995 72 112

INDEX FLUORESCENT TRACK LIGHTS EXTERIOR 71015 84 71018 84 71021 84 71024 84 71027 84 74031 85 74032 85 74037A 83 74037B 83 74044A 83 74044B 83 74156A 83 74156B 83 74164A 83 74164B 83 74858 85 74860 85 AS-118 82 AS-213 82 AS-218 82 ASM-126 82 ASM-218 82 ASM-226 82 ASM-232 82 ASM-242 82 25-7024 27,89 25-7030 27,89 25-7031 27,89 25-7033 27,89 25-7035 27,89 25-7037 27,89 25-7075 27,89 25-7075 27,89 25-7078 27,89 25-7079 27,89 25-7101 27,89 25-7105 27,89 25-7110 27,89 25-7201 27,89 25-7205 27,89 25-7210 27,89 25-7301 27,89 25-7305 27,89 25-7310 27,89 25-7318 27,89 25-7906 27,89 73252 91 73253 91 73664 MA 90 73666 MA 90 77809 90 77811 90 77815 90 77829 91 77831 91 77835 91 77837 92 77838 92 77839 92 77842 92 77843 92 77844 92 77846 92 77847 92 77848 92 710521 97 710522 97 711821 97 711822 97 71190 106 71841 107 71842 107 71847 107 71848 107 71851 107 71852 107 71854 107 71855 107 71856 107 71872 107 71876 107 7376 111 7377 111 7378 111 7379 111 7380 111 71876 107 7430107 102 7430110 102 7430123 102 7430407 102 7430410 102 7430423 102 7430607 102 7430610 102 7430623 102 7430807 102 7430810 102 7430823 102 7440123 104 7441622 104 7441623 104 75200 99 7520107 103 7520110 103 7520123 103 7520137 103 75203 99 75204 99 7520407 103 7520410 103 7520423 103 7520437 103 75205 99 75206 99 75207 99 75208 99 75209 99 75221 100 75222 98 75223 100 75225 98 75229 98 75234 100 75236 98 75237 100 75238 98 75239 98 75240 98 75243 98 75245 100 75246 98 75252 98 75292 98 753347 109 753348 109 753349 109 753351 109 755031 EURO 96 755034 EURO 96 755034 BTEURO 96 755035 EURO 96 755035 BTEURO 96 755036 EURO 96 755036 BTEURO 96 755150 110 755247 108 755249 108 755250 110 755355 109 755356 109 755357 109 755360 109 7554UB 110 755400 110 755440 97 755450 97 755451 97 755452 97 755453 97 7555UB 110 755570 110 7556 110 7557 110 7558 110 7559 110 7560 110 75672 108 75676 108 75680 108 75683 108 75690 108 75692 108 75693 108 75694 108 75700 106 75702 106 75704 106 75706 106 75708 106 75710 106 75712 106 75714 106 75736 111 75737 111 75738 111 75864 101 75866 101 75870 101 75872 101 75874 101 75877 101 75878 101 75910 101 75911 101 75912 101 7614860 104 7614861 104 7614863 104 76186 104 76187 104 76188 104 76189 104 76200 105 76206 105 76207 105 76210 105 76216 105 76217 105 76230 105 76236 105 76237 105 7691621 100 7691622 100 77820 106 77822 106 78316 111 78317 111 78318 111 78326 111 78327 111 78328 111 78336 111 78337 111 78338 111 113