Diesel Service Page 1 / Page 2 The BG Diesel Service addresses the needs of these specialized powerplants by restoring lost performance and preventing costly repairs. This service will reduce overall maintenance costs, while ensuring long, productive lives for diesel engines. BG Diesel Thaw BG Diesel Thaw is a fast, effective means of thawing gelled diesel fuel and restoring fuel flow. It will liquefy thickened fuel and melt ice crystals. It is noncorrosive and contains no alcohol. It is compatible with fuel and all system components. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Catalytic converter, diesel particulate filter and oxygen sensor safe. Part No. 25632 Part No. 256 BG 244 BG 244 quickly and effectively cleans diesel fuel injectors. It removes carbon deposits from combustion chambers, restores performance, smooths engine idle and helps prevent costly repairs. In only a few short miles of driving, engine response is restored! One quart (946 ml) of BG 244 treats 20-40 gallons (75-150 Liters) of diesel fuel. To maintain fuel system cleanliness and engine performance, add BG 244 to fuel tank at 7,500 to 9,000 mile (12,000 14,500 km) intervals. Catalytic converter and oxygen sensor safe. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Part No. 24432 Part No. 244 BG Diesel Care BG Diesel Care is a specially formulated, highly effective cleaner which quickly and safely decarbonizes diesel fuel injection systems. It is designed for the new electronically controlled common rail systems using direct injection, as well as traditional mechanical fuel injection systems. BG Diesel Care will not harm plastic components in modern injection pumps and is compatible with catalytic converters, sensors and trap oxidizers. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Catalytic converter and oxygen sensor safe. Part No. 229 BG Biodiesel Fuel Conditioner BG Biodiesel Fuel Conditioner is a multi-functional fuel supplement formulated to improve all types of biodiesel fuel. It will stabilize and protect biodiesel in storage. It provides unsurpassed protection against moisture contamination and guards against corrosion. It reduces the risk of fuel gelling, so that cold temperature performance is greatly improved. Catalytic converter, diesel particulate filter and oxygen sensor safe. Complies with Federal low-sulfur content requirements for use in diesel motor vehicles.
Part No. 240 Available in other bulk sizes BG Inject-A-Flush for Diesels The BG Inject-A-Flush for Diesels is the ultimate diesel injector cleaning system for passenger cars, SUVs and light trucks. It is simple to use, easy to store and has no moving parts. Direct connections to the vehicle s fuel supply and return lines allow the BG Inject-A-Flush for Diesels to deliver the exact amount of BG Diesel Care, Part No. 229, needed to clean deposit-clogged injectors fast and efficiently. The BG Inject-A-Flush for Diesels service is completed by adding BG 244, Part No. 244, to the vehicle s fuel tank to remove hard combustion chamber deposits. Part No. 9700 BG DOC Diesel Oil Conditioner BG DOC for diesel engine oil is a revolutionary product designed especially for today s modern high-output diesel engines. BG DOC maintains like-new diesel engine power and performance, neutralizes acids and acid corrosion, reduces friction and wear on engine parts, stabilizes viscosity, prevents sludge through increased oxidation and soot control. BG DOC is compatible with all diesel engine oils including synthetic and multi-grade. Part No. 11232 BG DFC with DPL Diesel Fuel Conditioner with Diesel Pump Lubricant BG Diesel Fuel Conditioner with DPL (Diesel Pump Lubricant) is a multifunctional additive. It removes deposits from the fuel system and prevents deposit re-formation. It provides the necessary film strength and lubricity to lowsulfur diesel fuel to prevent fuel injection pump parts from scoring or seizing. BG Diesel Fuel Conditioner with DPL also cleans the entire fuel system, reduces exhaust emissions, improves mileage, protects against rust and corrosion and stabilizes fuel in storage. Catalytic converter and oxygen sensor safe. One 6 oz. (177 ml) bottle treats 110 125 gallons (420 470 Liters) of diesel fuel. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Part No. 2276 6 oz. (177mL) bottle BG Diesel Fuel Lubricant with Conditioner BG Diesel Fuel Lubricant with Conditioner is a superior multi-functional fuel supplement. It provides the necessary film strength and lubricity to low-sulfur and ultra-low sulfur diesel fuel to prevent fuel pump and injection parts from scoring and seizing. This diesel fuel additive complies with the Federal lowsulfur content requirements for use in diesel motor vehicles. It will remove deposits from the fuel system and prevent their re-forming. Two ounces (60 ml) of BG Diesel Fuel Lubricant with Conditioner treats up to 40 gallons (150 Liters) of diesel fuel. Catalytic converter and oxygen sensor safe. Part No. 227D 16 oz. (483 ml) bottle BG All Weather DFC with Lubricity
BG All Weather DFC with Lubricity is a multi-functional diesel fuel conditioner especially formulated for low and ultra-low sulfur diesel fuels. It contains highly effective heat stable detergent/dispersants for cleaning the entire fuel system from fuel tank to catalytic converter, including the fuel injectors. It contains an approved diesel pump lubricant to provide lubricity for the fuel pumps and fuel injectors so as to prevent scoring and excessive wear. It will also protect against diesel fuel gelling during engine operation in sub-zero temperatures. BG All Weather DFC with Lubricity also adds antioxidants and corrosion inhibitors to maintain fuel quality during storage. One 6 oz. (177mL) bottle treats 10-40 gallons (40-150 Liters). This one-tank treatment provides great versatility to cover passenger car diesel engines, such as VW, as well as light duty diesel pickup trucks, such as the Ford PowerStroke. Catalytic converter and oxygen sensor safe. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Part No. 247 6 oz. (177 ml) bottle BG Ultra-Guard BG Ultra-Guard is the first true multi-purpose gear oil available in the fleet industry. It is a synthetic (Polyalphaolefin) gear oil blended in SAE 75W-90 viscosity and can be used in all car and truck axle applications calling for a GL-5 gear oil. It can also be used in all truck standard transmissions and automotive manual transmissions, transaxles and transfer cases calling for GL-4 gear oil, engine oil or ATF, as long as viscometric requirements are satisfied. BG Ultra-Guard provides thermal stability, smoother gear shifting, optimum drive line efficiency, quieter operation, protection against wear, pitting and corrosion, seal compatibility and improved seal performance, improved fuel efficiency, reduced maintenance, long drain life, extended component life and application versatility. BG Ultra-Guard is covered by the BG Best Guarantee Program. Part No. 7505 5 gal. (18.927 L) pail BG Shear Power HD BG Shear Power HD is designed for use in all diesel engines. This synthetic 15W-40 oil has enhanced detergency, superior cold flow properties and excellent oxidation inhibitors. Specifically designed to allow long drain intervals, BG Shear Power HD provides extended wear protection and remarkable deposit control capabilities, even under severe conditions. BG Shear Power HD far exceeds all industry standards. Part No. 716 BG 248 Maximum Diesel Performance BG 248 cleans the entire diesel fuel system including injectors and nozzles to restore maximum fuel atomization. Increases the cetane quality of diesel fuel. Contains BG Diesel Pump Lubricant to protect pump parts from damage or failure due to low-sulfur fuel. Special pour depressant additives isolate wax crystals as they are formed during cold weather and prevent their growing together; thus, fuel flows freely at sub-zero temperatures. BG 248 reduces exhaust smoke, provides smoother and quieter operation, improves fuel
economy and restores maximum power and performance to diesel engines. Catalytic converter and oxygen sensor safe. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Part No. 248 BG DFC Plus BG DFC (Diesel Fuel Conditioner) Plus combines all of the ingredients of BG DFC with DPL, Part No. 227D, plus a pour depressant/flow improver. Special pour depressant additives isolate wax crystals as they are formed during cold weather and prevent their growing together; thus, fuel flows freely at sub-zero temperatures. BG DFC Plus cleans the entire fuel system, controls engine deposit formation, improves diesel engine combustion and power, eliminates injector plunger sticking, eliminates nozzle fouling, extends injector life, reduces exhaust smoke caused by a dirty fuel system, stabilizes fuel in storage, is soluble in all diesel fuels, protects fuel system components from rust and corrosion, contains no metallic ash producing materials, and provides the necessary film strength and lubricity to low-emission diesel fuel to prevent pump parts from scoring or seizing. Catalytic converter and oxygen sensor safe. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles. Part No. 230 BG Extra Duty 15W-40 Engine Oil BG Extra Duty 15W-40 Engine Oil is an advanced high performance heavy duty oil. It is fortified with improved anti-oxidant additives to protect against oil degradation, which is accelerated by the conditions present in today s heavily loaded engines. Deposit build-up can lead to bore polishing and ring and cylinder wear. BG Extra Duty helps prevent deposit formation. SAE 15W-40 semi-synthetic Part No. 7141 Page 1 / Page 2 / Top of Page Diesel Service Page 1 / Page 2 BG Diesel Fuel Pour Depressant BG Diesel Fuel Pour Depressant is an organic polymer which provides fuel pumpability in cold weather conditions without altering other diesel fuel properties. It is ashless, does not contribute to corrosion, and has no adverse effects on diesel fuel combustion. It modifies wax crystal structure, reducing them in size and allowing the diesel fuel to flow more readily without blockage in fuel lines and filters. Catalytic converter and oxygen sensor safe. This diesel fuel additive complies with the Federal low-sulfur content requirements for use in diesel motor vehicles.
Part No. 2155 5 gal. (18.927 L) pail BG MGC Multi-Gear Concentrate BG MGC is a technically advanced gear oil supplement that enhances lubricant film thickness and improves extreme pressure properties for gear surfaces and other moving parts under frictional conditions. Designed for use in all types of manual industrial transmission applications. BG MGC offers many unique performance benefits: smooths manual transmission shifting characteristics, reduces gear box temperature, reduces component wear, improves demulsability, enhances thermal stability, extends oil service life and cuts maintenance costs. Part No. 3251 BG Ultra-Guard Heavy Duty BG Ultra-Guard Heavy Duty is a synthetic (Polyalphaolefin) A.P.I. GL-5 rated gear oil blended to SAE 75W-140 viscosity. It may be used in all conventional and limited slip differentials. (Note: Limited slip differentials require the addition of BG LSII, PN 328). As a heavy duty gear oil it provides the following superior benefits: Thermal stability Reduced maintenance Optimum drive line efficiency Long drain life Quieter operation Protection against wear, pitting and corrosion Clean components and extended component life Seal compatibility and improved seal performance. Part No. 752 BG Universal Super Cool BG Universal Super Cool coolant additive is specially formulated for use in conventional, long life, hybrid and heavy duty coolants. It provides outstanding protection for all metals utilized in modern automotive cooling systems. It has excellent corrosion inhibitors, anti-foam capabilities, and is biodegradable in its unused form. Passes ASTM 2809 and ASTM 2570 in ASTM reference synthetic used coolant. Part No. 546 Part No. 5468 12 oz. (355 ml) bottle 8 oz. (237 ml) bottle