Instruction Manual PL12-1092EN 75RM-2024 Right Angle Fixtured Nutrunner For additional product information visit our website at http://www.apextoolgroup.com
Cleco Product Information PL70-1092EN The original language of this manual is English. Product Safety Information: Intended Use: This fixtured nutrunner is driven by compressed air to assemble or remove threaded fasteners. For additional product safety information refer to Apex Tool Group, LLC or GmbH & Co. OHG document GS-2000, General Safety Air Assembly Tools. WARNING This nutrunner must not be modified in any manner unless approved in writing by, LLC or GmbH & Co. OHG. All safety devices must be properly installed and maintained in good working order. Abuse, misuse, or failure to obey this and any other issued warnings may result if injury or death. EC Declaration of Conformity: We affirm that this machine is in accordance with the following EC regulations (2006/42/EC). Applied harmonized standards are ISO 12100:2010. The name, job function and address of the person authorized to compile the technical file. Mr. Vishnu Irigireddy Director of Global R&D- Mechanical Engineering 670 Industrial Drive Lexington, SC 29072 Grease Application of the nutrunner should determine how frequently it is greased. It is recommended that all gearing receive a generous amount of grease during each service interval. Part No. Packaged Designation A123771 16 oz. (0.45 kg) Shell Alvania EP 00 540450 16 oz. (0.45 kg) Chevron Black Pearl EP NLGI Air Supply Line: Parameter Air Hose Working pressure range Compressed air Description Minimum inside diameter: 1/2" (12.7mm) Maximum length: 8' (2.5 m) Performance rated at: 90 psi (620 kpa) Air quality according to ISO 8573-1, quality class 2.4.3 The compressed air must be clean and dry. Service and Repair: Tool service and repair should be performed by an authorized, LLC or GmbH & Co. OHG Center. Refer to the last page of this manual for locations. Disposal: Observe local disposal guidelines for all components of this tool and its packaging. Signature: Vishnu Irigireddy Date: February 20, 2015 Noise and Vibration: Noise: 82 db(a) Vibration: < 2.5 m/s 2 Air Line Lubrication: Use, LLC or GmbH & Co. OHG s lightweight air tool oil 500021 (available in quantities shown in the following chart) or an SAE-5 lightweight spindle oil. Copyright Protection:, LLC or GmbH & Co. OHG reserves the right to modify, supplement or improve this document or the product without prior notice. This document may not be reproduced in any way, shape or form, in full or parts thereof, or copied to another natural or machine readable language or to a data carrier, whether electronic, mechanical, optical or otherwise without the express permission of Apex Tool Group, LLC or GmbH & Co. OHG Part No. Packaged Designation 540397 1 Quart (0.94 liter) Airlube 10W/NR-420LB DR 533485 1 US Gallon (3.78 liter) Airlube 10W/NR-420LB DR Page 3
PL12-1092EN Cleco A 75RM-2024 Motor Housing Assembly 1 2 4 1 2 3 5 2 6 Page 4
Cleco PL70-1092EN Illustration "A": 75RM-2024 Motor Housing Assembly Ref Number # X EN Description -- 201050PT 1 Motor Housing Assembly (includes Ref. 1-6) 1 202495PT 2 Inlet Bushing 2 615018 4 12 O-Ring (2-1/2" x 2-5/8") 3 202050PT 1 Deflector Spacer 4 202051 1 Exhaust Deflector 5 869943 1 3 Muffler 6 202497PT 1 Motor Housing (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) Page 5
PL12-1092EN Cleco B 75RM-2024 Motor Assembly - Reversible 6 1 2 5 7 3 4 8 10 3 11 9 Page 6
Cleco PL70-1092EN Illustration "B": 75RM-2024 Motor Assembly - Reversible Ref Number # X 1 847960 1 1 Set Screw 2 865352 1 1 Rotor Lock Nut 3 19469 2 4 Ball Bearing 4 869928 1 Rear Bearing Plate 5 203148PT 1 Cylinder (includes Ref. 6) 6 812918 1 2 Cylinder Pin 7 847603 1 2 Drive Screw 8 203147 1 Rotor 9 869927 5 15 Rotor Blade 10 869923 1 Front Bearing Plate 11 869929 1 Motor Spacer (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) EN Description Page 7
PL12-1092EN Cleco C 75RM-2024 Gearing Assembly - Code 2 1 2 4 3 7 6 8 9 5 Page 8
Cleco PL70-1092EN Illustration "C": 75RM-2024 Gearing Assembly - Code 2 Ref Number # X EN Description 1 869900 3 6 Planetary Gear (21T) (includes Ref. 2) 2 844774 3 Planetary Gear Bearing 3 869897 1 Planetary Gear Spider (includes Ref. 4) 4 832125PT 3 Planetary Gear Pin 5 869904 1 Planetary Gear Cage 6 869902 3 6 Planetary Gear (18T) 7 869907 39 78 Planetary Gear Roller 8 869908 3 6 Plandetary Gear Pin 9 869906 1 Gear Case (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) (T) Teeth Page 9
PL12-1092EN Cleco D 75RM-2024 Right Angle Attachment 12 13 1 2 3 4 5 6 7 4 17 17 8 14 9 15 10 16 16 11 Reaction Bar Assembly Page 10
Cleco PL70-1092EN Illustration "D": Code 75RM-2024 Right Angle Attachment Ref Number # X EN Description -- 301094 1 Right Angle Attachment - 3/4" Square Drive (includes Ref. 1-14) 1 869877 1 Bearing Retainer 2 847659 1 2 Ball Bearing 3 869880 1 2 Pinion Needle Bearing 4 861905 1 1 Gear Set 5 869875 1 Angle Housing 6 883720 1 2 Spindle Needle Bearing 7 867546 1 Grease Plug 8 205994 1 Output Spindle - 3/4" Square Drive (includes Ref. 9-11) 9 812222 1 2 Spindle Ball Bearing 10 869887 1 Bearing Cap (includes Ref. 14) 11 867997 1 2 Bearing Cap Lock Screw 12 869879 1 Clamp Ring 13 869878 1 Clamp Nut 14 202484PT 1 Reaction Bar Bracket 15 202483 1 Reaction Bar Clamp 16 202485 2 Reaction Bar Bolt 17 845995 2 Reaction Bar Jam Nut (#) Quantity (X) Recommended (quantity shown based on 1-5 tools in operation) Page 11
Sales & Service Centers Note: All locations may not service all products. Please contact the nearest Sales & Service Center for the appropriate facility to handle your service requirements. Brazil Ind. Com. Ferram. Ltda Av. Liberdade, 4055 Zona Industrial Iporanga Sorocaba, São Paulo CEP# 18087-170 Brazil Tel: +55 15 3238 3820 Fax: +55 15 3238 3938 Canada Apex Tool Canada, Ltd Sales & Service Center 7631 Bath Road Mississauga, Ont. L4T 3T1 Canada Tel: (866) 691-6212 Tel: (905) 673-4400 China Apex Power Tool Trading (Shanghai) Co., Ltd Building A8, No. 38 Dongsheng Road Pudong, Shanghai China 201201 Tel: +86-21-60880320 Fax: +86-21-60880298 www.aptspowertools.com.cn England GmbH & Co. OHG C/O Spline Gauges Piccadilly, Tamworth Staffordshire B78 2ER United Kingdom Tel: +44 1827 872 771 Fax: +44 1827 8741 28 France SAS 25 rue Maurice Chevalier B.P. 28 77831 Ozoir-La-Ferrière Cedex, France Tel: +33 1 64 43 22 00 Fax: +33 1 64 43 17 17 Germany GmbH & Co. OHG Industriestraße 1 73463 Westhausen Germany Tel: +49 (0) 73 63 81 0 Fax: +49 (0) 73 63 81 222 www.apexpowertools.eu Hungary Hungaria Kft Platànfa u.2 9027 Györ Hungary Tel: +36 96 66 1383 Fax: +36 96 66 1135 India Apex Power Tools India Private Limited Gala No. 1, Plot No. 5 S. No. 234, 235 & 245 Indialand Global Industrial Park Taluka-Mulsi, Phase I Hinjawadi, Pune 411057 Maharashtra, India Tel: +91-20-66761111 Mexico Manufacturing México S. de RL de CV Vialidad El Pueblito #103 Parque Industrial Querétaro Querétaro, QRO CP# 76220 Mexico Tel: +52 (442) 211-3800 Fax: +52 (800) 685-5560 USA - Detroit, Michigan Sales & Service Center 2630 Superior Court Auburn Hills, MI 48326 Tel: (248) 393-5640 Fax: (248) 391-6295 USA - Lexington, South Carolina 670 Industrial Drive Lexington, SC 29072 Tel: (800) 845-5629 Tel: (803) 951-7544 Fax: (803) 358-7681 USA - Los Angeles, California Sales & Service Center 6881 Stanton Avenue Unit B Buena Park, CA 90621 Tel: (714) 994-1491 Fax: (714) 994-9576 USA - Seattle, Washington Sales & Service Center 2865 152nd Avenue N.E Redmond, WA 98052 Tel: (425) 497-0476 Fax: (425) 497-0496 USA - York, Pennsylvania Sales & Service Center 3990 East Market Street York, PA 17402 Tel: (717) 755-2933 Fax: (717) 757-5063, LLC 1000 Lufkin Road Apex, NC 27539 Phone: 919-387-0099 Fax: 919-387-2614 www.apextoolgroup.com PL12-1092EN/Printed in USA 02/2015/Copyright, LLC