Air Cylinder Double Acting: ø/ingle Acting pring Return: ø2., ø Variations eries tandard B Basic mm Double acting ingle acting ingle rod ingle rod pring return 2. tandard stroke,, 1,,,, 1, How to Order/Double Acting B U Cylinder standard stroke,, 1, Applicable tubing Tube material U mm mm Page 1.1-2 1.1- C8 C9 Refer to p.1.1- and 1.1- for single acting style. 1.1-1
Air Cylinder/Double Acting ø Double acting/ingle rod pecifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Operating piston speed Cushion Thread tolerance tolerance Lubrication Double acting single rod Air 1.0MPa 0.7MPa 0.2MPa C to 70 C (Non-freezing) 0 to 00mm/s None JI class 2 +0. 0 Basic style Not required (Non-lube) Compact series of double acting cylinders (A cylinder with a ø bore has been added as a compact style to the existing : ø6 double acting cylinder.) The fitting on the rod cover side has been provided with a variable piping direction. (The piping direction of the fitting on the rod cover side can move freely within a range of ±90.) The piping direction of the fitting on the rod cover side varies within a range of ±90. Model/Cylinder /tandard s Model B Applicable Tubing Tubing Metric size Theoretical Force Rod size 2 tandard stroke,, 1, mm mm Piston area (mm 2 ) 12.6 9. 0.2 2.2 1.88 Model No. TU02 T02 Operating pressure (MPa) 0.3 3.78 2.82 0..0 3.76 0. 6.30.70 0.6 7.6.6 0.7 8.82 6.8 Cylinder stroke 1 (g) 12.0 12. 12.8 13.2 Precaution Be sure to read before handling. Refer to p.0-39 to 0-2 for afety Instructions and common precautions. Piping q Do not forcibly connect piping that could apply a lateral force to the cylinder tube, this could cause the cylinder tube to tilt and lead to a malfunction. 1.1-2 q Do not install by directly grasping the cylinder tube, as this could cause the tube to deform and lead to a malfunction. w Do not install by grasping the piston rod with a pair of electrician's pliers, as this could scratch the piston rod, which could damage the bearing or the rod seal. As a result, it could lead to a malfunction or air leakage.
Air Cylinder/Double Acting Construction Component Parts No. q w e r t y u i o!0 Description Rod cover Cylinder tube Piston eal retainer Fittings Rod seal Piston seal Tube gasket nut Rod end nut tainless steel Body Gasket PVC Note Nickel plated Nickel plated C8 C9 Dimensions: Double Acting/Basic style 18 23 1 28 33 1 6 1 61 66 1.1-3
Air Cylinder/ingle Acting (pring Return) ø2., ø How to Order/ingle Acting B U B Basic 2 mm Applicable tubing Tube material U mm mm ingle acting/pring return Cylinder standard stroke ø2., ø,, 1, ingle acting spring return pring Retracting Force 2. 2. Extended position Retracted position 1.13 0.6 3.0 1.7 1. 3.7 2.6 1.6 Precautions (g) 6. Be sure to read before handling. Refer to p.0-39 to 0-2 for afety Instructions and common precautions. pecifications Fluid Proof pressure Max. operating pressure Min. operating pressure Ambient and fluid temperature Operating piston speed Cushion Thread tolerance tolerance Lubrication Model/Cylinder /tandard s Model B2 B ingle acting spring return Air 1.0MPa 0.7MPa 0.3MPa to 70 C (Non-freezing) 0 to 00mm/s None JI 2 class +0. 0 Basic style Not required (Non-lube) tandard stroke 2.,,, 1, Piping q Do not forcibly connect piping that could apply a lateral force to the cylinder tube, as this could cause the cylinder tube to tilt and lead to a malfunction. q Do not operate with a load applied to the piston rod during retraction. The spring that is built into the cylinder provides only enough force to retract the piston rod. Thus, if a load is applied, the piston rod will not be able to retract to the end of the stroke. w Do not install by grasping the cylinder tube, as this could cause the tube to deform and lead to a malfunction. 1.1- Applicable Tubing Tubing Metric size Theoretical Force 2. Rod size 1 2 Operating direction mm mm Piston area (mm 2 ).9 12.6 0.3 0.3 0.7 Model No. TU02 T02 Operating pressure 0. 0.83 2.00 0. 1.32 0.6 3.26 1.7 0.6 1.81.2 0.7 2.30.78
Air Cylinder/ingle Acting (pring Return) Construction B2- U B- U Dimentions: Basic style : ø2./b2- U Component Parts No. q w e r t y u Description Rod cover Cylinder tube Piston rod pring Piston seal nut Rod end nut tainless steel tainless steel wire (Impossible to disassemble) Note Black zinc chromate C8 C9 2. 16. 2. 29 38 : ø/b- U 19. 28. 1 37. 6. 0 9 1 8 67 1.1-