TERMS. Shortages or incorrect merchandise must be reported within 10 days after receipt.

Similar documents
TERMS. Shortages or incorrect merchandise must be reported within 10 days after receipt.

TERMS. Shortages or incorrect merchandise must be reported within 10 days after receipt.

Starter Small Parts. Wagner Alternators & Supplies, Inc.

TERMS. Shortages or incorrect merchandise must be reported within 10 days after receipt.

SOLENOID CAPS. Wagner Alternators & Supplies, Inc.

STARTER DRIVES. Wagner Alternators & Supplies, Inc.

TERMS. Shortages or incorrect merchandise must be reported within 10 days after receipt.

Clutch & Decoupler Pulley & Tools

Monthly Specials & New Arrivals!

Clutch Pulley. Metro Auto Industrial Inc. Toll Free: for. Bosch, Delco, Denso, Ford, Hitachi, Mitsubishi, Valeo.

POWERSPORTS - ATV/UTV UNITS

Celebrating Transpo Electronics 40th Anniversary!

Monthly Specials & New Arrivals!

APPLICATION GUIDE 2014

2018 SKN New Product Listing

CHARGING FORWARD. Not all voltage regulators are created or designed equally! NOVEMBER 2015 NOVEMBER & DECEMBER 2015

Monthly Specials & New Arrivals! June 2018

ALTERNATOR AND STARTER MARKETS SERVED

6 GROOVE CLUTCH PULLEY W/ FREE WHEEL

Check for the most up to date information

November 2015 BOSCH WATER COOL ALTERNATOR. SComponent PartsE. Metro Auto Industrial Inc. Toll Free:

Check for the most up to date information

Alternator Buyer s Guide. Aftermarket Operations 7585 Empire Drive Florence, KY USA. Tel: Fax:

REAR COMPARTMENT LOCKS

COMPLETE LIST OF TUMBLER SERIES

IIHS head restraints & seats geometric ratings for older model vehicles

MOTIVE PRODUCTS APPLICATION GUIDE

DENTO ATF Multi-Vehicle HV

BOSCH LUCAS DAB 954 MAGNETI MARELL VALEO , Transpo No: BM130

Use tumbler series P /105 Chevrolet Monte Carlo

I S O 9 ABBREVIATIONS. Diameter Amps. Millimeters. Commutator End Counter Clockwise Clockwise Dummy

DE Shaft D - 17 mm, SRE Shaft D - 12 mm,

revised BMW BACK Contact Cut Off Address Fax Knauz BMW/M.B./Mini (847) :30 PM 409 Skokie Highway, Lake Bluff (847)

EP WINDOW HANDLE UNIVERSAL TYPE Chrome EP HANDLE LOCK UNIVERSAL TYPE. EP HANDLE LOCK UNIVERSAL TYPE L Type, Chrome

Hand Pump Accessories

X500 USER MANUAL 1. RUNNING EVIRONMENT SOFTWARE INSTALLATION SOFTWARE ACTIVATION AND DOWNLOAD SOFTWARE INTRODUCTION...

REAR COMPARTMENT LOCKS

Acura CL Complete lock RH D Complete lock LH D Use tumbler series P /146 Acura CL D including pawl RH

REAR COMPARTMENT LOCKS

CHARGING FORWARD FEBRUARY 2016

Cooling System & Radiator Cap Pressure Tester K 185

Brake & Clutch Bleeding Equipment

SPIN-ON OIL FILTERS. Acura Reference Chart. Alfa-Romeo Reference Chart. American Motors Reference Chart. Audi Reference Chart. BMW Reference Chart

100% New. OE performance output curve

Choice Synthetic Blend Multi-Vehicle ATF Synthetic Blend ATF

New products from

AVI160T. Dual Internal Fan Alternators. T-Mount. Fits Ford E & F Series Diesel Engines Navistar LCF and Ford LCF Vehicles.

Let WAI Help You Harvest the Agricultural Business This Fall!

2015 WEGMANN automotive GmbH & Co. KG

Instruction Manual R134a DIGITAL MANIFOLD

REAR COMPARTMENT LOCKS

Cooling System Service Equipment

4L30E (ML4) 4 SPEED ELECTRONIC UP. TH180(MD3) 3L30 TH180C(MD2) w/l/u

PARTS BOOKS INSTRUCTIONS

REAR COMPARTMENT LOCKS

GR2790 GR3330 2RS/C3 (DDU)... GR3480 GR3820 2RS/C3 (DDU) // NEW // GR608 GR627

Acura CL Complete lock RH D Complete lock LH D Use tumbler series P /146 Acura CL D including pawl RH

bosch ALTERNATOR RECTIFIER COVERS

Engine Balancing Updated

5 OFF $ 5 OFF HIT IT BIG AUGUST 1 SEPTEMBER 30, 2017 BY ONLINE OR MAIL-IN REBATE. Lucky day

Rotating Electrical NEW PRODUCT HIGHLIGHTS 2010 FEB. / NEWS.110

LUG CENTERING HUB CENTERING LUG CENTERING SPACERS, SPRINGS AND DONUTS Quick Plates Series IV

KÖMÜR YUVALARI / BRUSH HOLDERS

Rotating Electrical NEW PRODUCT HIGHLIGHTS 2010 APR. / NEWS.111

SSR SSR SSR SSR

'08 '09 '10 '11 '12 '13 '14 '15 '16 '17 '18* Years Historical data source: IHS

A/C LUBRICANT SPECIFICATION & REPLACEMENT GUIDELINES

Safety in Steering and Suspension

CROSS REFERENCE LIST AIRTEX

IN Volt, B-Circuit, S-IG-L Terminals, 14.2 Vset. IN Volt, B-Circuit, S-F-L Terminals, 15.0 Vset, w/ LRC

MOTOR VEHICLE STATISTICS OF JAPAN

AG & INDUSTRIAL UNITS

TPMS. Service Parts and Tools. Sensors Service Kits Tools Dynamic. Toll-Free Sales. TPMS Tech Support.

AUTO SUPPLIERS LIMITED

Rotating Machine NEW PRODUCT HIGHLIGHTS 2014 DEC. / NEWS.136

TSB F-R00, 4-16F-R10, 4-16T-R00, 4-16T-R10, 4-18A-R05, 4-18A-R11, 4-18B-R05, 4-18B- R10, 4-18P-R05, 4-18P-R10, 4-18A-R10.

DATE: May 19, 2000 Service Instruction No. 1443E (Supersedes Service Instruction No. 1443D) Engineering Aspects are FAA Approved

Rotating Electrical NEW PRODUCT HIGHLIGHTS 2010 JUN. / NEWS.112

Press-release 9 June 2014

AMSOIL Application Style

Press-release 8 July 2014

Good for the USA. Buyer s Guide Thomas J Johnson. Helping Americans choose the global products that support American jobs.

AirAware App Guide # DD April OEM Replaced By. Make Model Year OEM Part #

External Regulators. Wagner Alternators & Supplies, Inc.

ZNP AFTERMARKET CROSS REFERENCE


Edition 2007/2 IA 9027 IA 9028 IA 9029 IA 9030 IA 9419 IA 9420 IA 9421 IA 9422 IA 9423 IA 9424 IA 9425 IA 9426 IA 9429 IA 9430

BG-A011 July 2018 WATER COOL. Parts for. Delco, Hitachi, Valeo. Metro Auto Industrial Inc. Toll Free:

Coded lock without pawl D D D D Replacement locks available from Strattec or from Chrysler dealers.

Fleet Average NO x Emission Performance of 2012 Model Year Light-Duty Vehicles, Light-Duty Trucks and Medium-Duty Passenger Vehicles

Your source when performance is critical O.E. Brake Shim Presentation

Press-release 10 November 2015

REMOTE START SECURITY BYPASS & INTERFACE CONNECTED VEHICLES PRODUCT & SOLUTION CATALOGUE

You can t afford NOT to upgrade! $191,100 $63,700. Reasons You Need Current Diagnostic Software

Press-release 15 January 2015

Automotive Industry Overview

** View our inventory every week at ** Join our mailing list to get our inventory every week! Text PremierPAA to 22828

BREMBO HIGH PERFORMANCE GRAN TURISMO APPLICATION LIST

Compressor Installation Procedures FAILURE TO FOLLOW THESE STEPS WHEN INSTALLING THE COMPRESSOR WILL VOID YOUR WARRANTY

Bracket Kits & Accessories

Transcription:

TERMS CREDIT / PAYMENT TERMS C.O.D. terms are cash or company check. Terms are C.O.D. until credit has been established by completing a credit application and being approved by WAGNER. An open account is Net 30 days from invoice date. Monthly statements will be mailed for your convenience. Accounts exceeding 30 days are subject to 1.5% per month finance charge. Any account proceeding into 60 days past due status shall have all charge privileges suspended until account is paid in full, or at the discretion of management. Returned checks will be subject to a $25.00 charge. ORDER TERMS Wagner Alternators & Supplies, Inc. reserves the right to accept any order or part thereof. Orders under $25 are subject to a $5.00 special handling fee. SHIPPING TERMS Merchandise is billed at the time of shipment. All prices are F.O.B., Chino, California, freight collect unless otherwise agreed in writing in advance by WAGNER. Orders are shipped via U.P.S., Federal Express, OnTrac or other common carriers unless otherwise specified at the time of order. Shortages or incorrect merchandise must be reported within 10 days after receipt. RETURNS Any Return must be authorized in advance with a RMA Number and must include documentation of contents, original invoice number and reason for return. All boxes must have RMA number on outside of box. Returned merchandise may be subject to a 15% restocking charge and must be in the original box or package. Unauthorized returns are subject to 30% handling charge and/or return to customer. LIMITED MANUFACTURER'S WARRANTY Wagner's liability is limited to the repair, replacement or credit for the value of the product sold within one year of invoice date. If product is found to be defective, Wagner will not be responsible beyond the value of the defective piece, nor in any way be responsible for any damages or expenses caused by defective goods. Wagner is not responsible for any misuse of its products. Wagner will not be liable to replace any part which has been altered, defaced, modified, or treated in such a way the company finds unacceptable. PRICING TERMS Wagner Alternators & Supplies, Inc. will make every effort to keep its customers informed of any price changes. Wagner reserve the right to change prices without notice. From time to time, we may find it necessary to apply a surcharge occasionally to offset additional import costs. Any such charge will be noted on the invoice and we will do our best to inform the customer at the time the order is placed. All invoices reflect prices in effect at time of shipment. Care is taken to ensure the accuracy of descriptions for each item, but Wagner assumes no responsibility for possible errors. Permission to reproduce this catalog and/or contents is expressly denied. revised 2017-1

WAGNER NUMBERING SYSTEM We have developed a simple yet efficient part numbering system that allows grouping of the electrical components by application (Alternator, Generator, or Starter), type of part (Rectifier, Brush, Solenoid, Etc.) and Manufacturer (Bosch, Lucas, Etc.). EXAMPLE: W080-00H The first letter signifies type of part: W-Wagner Import Line D-Delco L-Leece Neville N-Nikko C- Chrysler F-Ford M-Motorola P-Prestolite The first two numerical digits represent the component classification: ALTERNATOR 01-Alternator Covers 02-Bearings, Ball & Needle 03-Alternator Brushes 04-Diodes, Diode Trios 05-Pulleys 06-Rectifiers 07-Rotors 08-Int. Voltage Regulators 09-Ext. Voltage Regulators 10-Stators 11-Alternator Small Parts 12-Alternator CE Frames 13-Alternator DE Frame 14-Wire Harness/Repair Plugs 15-Brush Holders 16-Slip Rings 17-Ignition Modules 18-Grease/Paint/Supplies 19-Tools/Test Equipment GENERATOR 26- Generator Armature 27-Generator Brushes 30-Gen CE Frame 31-Gen DE Frame STARTER 40-Armatures 41-Starter Brushes 42-Bushings 45-Solenoids 46-Solenoid Caps 47-Starter Drives 48-Starter Small Parts 49-Starter CE Frame 50-Brush Holders 51-Housings 55-Testers If a third digit shows, it represents the original Manufacturer in our Import line: 0 - Bosch 3 - Fiat, Magneti Marelli 6 - Motorola 1 - Lucas, Cav, Butec 4 - SEV 7 - Ducellier 2 - Paris Rhone, Valeo 5 - All Japanese 8 Iskra The final two numerical digits designate the specific identification number within each category. If the part number is not immediately followed by a letter, then it is an aftermarket replacement part. Otherwise, one of the following may be used: "N" Denotes Original OEM Part "H" Denotes Hybrid "S" Denotes Sold in Set Original Manufacturer names and numbers are used for reference purposes only.

W050-05 V-BELT PULLEY SET AUDI ZAMBONI AUDI W050-08 V-BELT PULLEY W050-11 SERPENTINE CLUTCH PULLEY MERCEDES MERCEDES HD 24-91100 13054 13055 13094 13109 13129 13147 14396 14410 14412 14603 14778 14779 0-120-469-586 0-120-469-598 0-120-469-599 0-120-469-633 0-120-469-690 0-120-469-698 0-120-469-729 0-120-469-739 0-120-469-873 17mm BORE, 73mm OD, 42mm W, 9.5mm BELT *INCLUDES PULLEY, SPACER & PLATE 24-91102 13147 0-120-489-002 0-120-489-005 0-120-489-857 17mm BORE, 66mm OD, 58mm W, 9.5mm BELT, 48mm TO FIRST GROOVE 1 GROOVE, LONG REACH, FOR A/C APPLICATIONS 2.05.0375.0 24-91252 24-91252-3 5375 F-225643.11 F-225643.4 12676 12677 0-123-510-058 0-123-510-075 0-123-510-102 0-123-520-010 17mm BORE, 55.5 mm OD, 36.5mm W, 7mm DEEP, 16x1.5 THREAD, 22mm BELT, 5.5mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 VOLVO W050-06 DOUBLE V-BELT PULLEY W050-09 SERPENTINE CLUTCH PULLEY W050-12 SERPENTINE CLUTCH PULLEY MERCEDES MERCEDES HD 14070 14392 14539 0-120-400-852 0-120-400-853 0-120-400-912 0-120-400-913 0-120-400-932 0-120-400-933 0-120-489-065 0-120-489-066 17mm BORE, 68.5mm OD, 28.5mm W, 9.5mm BELT, 9.5mm TO FIRST GROOVE 2 GROOVE 24-91257 24-91257-3 5384 F-226556.10 F-226556.4 F-226556.5 22785 0-123-320-033 0-123-320-036 0-123-325-006 17mm BORE, 56mm OD, 38mm W, 16mm DEEP, 16x1.5 THREAD, 18mm BELT, 18mm TO FIRST GROOVE 5 GROOVE, CW CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 24-91254 5377 F-225644.4 F-225644.5 F-225644.6 F-225644.7 13709 13811 13972 22901 0-123-320-041 0-123-320-046 0-123-510-049 0-123-510-080 0-123-510-101 0-124-325-227 A13Vi222 A13Vi302 A13Vi305 17mm BORE, 56mm OD, 38mm W, 8mm DEEP, 16x1.5 THREAD, 22mm BELT, 15.5mm TO FIRST GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04, W19-06, ALTERNATE W050-12N W050-07 SERPENTINE PULLEY CHRYSLER DODGE PLYMOUTH W050-10 SERPENTINE CLUTCH PULLEY W050-12N SERPENTINE CLUTCH PULLEY MERCEDES MERCEDES HD 24-91250 13191 14789 0-120-450-012 0-120-450-014 0-120-450-016 0-120-450-017 0-120-469-624 17mm BORE, 68mm OD, 30mm W, 15mm BELT, 14.7mm TO FIRST GROOVE 4 GROOVE 24-91105-3 24-91271 5381 F-225355.4 F-225355.6 F-225355.7 13903 0-123-320-027 0-123-515-017 0-123-515-020 17mm BORE, 50mm OD, 40mm W, 16mm DEEP, 16x1.5 THREAD, 22mm BELT, 15mm TO FIRST GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 24-91254 24-91254-3 5377 F-225644.4 F-225644.5 F-225644.6 13811 13972 0-123-320-041 0-123-320-046 0-123-510-038 0-123-510-049 0-123-510-080 0-123-510-101 0-124-325-227 17mm BORE, 55.5mm OD, 8mm DEEP, 16x1.5 THREAD, 37.5mm W, 22mm BELT, 15mm TO FIRST GROOVE, CW, CLUTCH, INA, USE INSTALLATION TOOL W19-03, W19-04, ALTERNATE W050-12 74 Names and numbers are for reference purposes only

W050-13 SERPENTINE CLUTCH PULLEY MERCEDES MERCEDES HD W050-16 SERPENTINE PULLEY MERCEDES W050-18N SERPENTINE CLUTCH PULLEY VOLVO VOLVO PENTA 24-91263 24-91263-3 5993 F-228824.1 F-228824.11 F-228824.4 12383 22879 0-123-510-082 0-123-510-107 0-123-520-023 17mm BORE, 50mm OD, 40mm W, 8mm DEEP, 16x1.5 THREAD, 22mm BELT, 15.5mm TO FIRST GROOVE, CW CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 13243 13367 13709 14820 0-120-469-746 0-120-469-897 0-120-469-925 0-120-469-928 0-120-469-948 0-120-489-323 0-120-489-324 0-120-489-326 A13Vi175 17mm BORE, 55mm OD, 38mm W, 4.5mm DEEP, 22mm BELT, 14.5mm TO FIRST GROOVE 24-91104-3 5426 F-230401.6 F-230401.7 F-552923.1 F-553099 11081 11091 11488 13801 13998 0-124-515-019 0-124-515-054 0-124-525-014 0-124-525-029 0-124-525-060 0-124-625-003 0-124-625-024 17mm BORE, 56mm OD, 37.6mm W, 8mm DEEP, 16x1.5 CCW THREAD, 22mm BELT, 6mm TO FIRST GROOVE, CCW, CLUTCH, INA, USE INSTALLATION TOOL W19-03, W19-04. NOTE THREAD IS CCW, ALTERNATE W050-18 W050-14 SERPENTINE CLUTCH PULLEY W050-17 SERPENTINE PULLEY AUDI W050-19 SERPENTINE PULLEY 24-91107 5383 F-226804.09 F-226804.4 F-226804.5 F-226804.6 13831 13832 13833 0-123-310-035 0-123-320-032 0-123-510-046 0-123-510-047 0-123-515-021 0-123-525-001 17mm BORE, 56mm OD, 42.2 W, 16mm DEEP, 16x1.5 THREAD, 22mm BELT, 15.5mm TO FIRST GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 13380 13381 13382 13441 13458 0-120-465-021 0-120-485-019 0-120-485-023 0-120-485-039 0-123-310-003 0-123-315-006 0-123-320-005 0-123-340-005 0-123-505-010 17mm BORE, 54mm OD, 44mm W, 15.5mm DEEP, 25mm BELT, 18mm TO FIRST GROOVE 7 GROOVE 13380 13381 13382 13605 13606 13622 0-120-485-046 0-123-310-001 0-123-310-002 0-123-310-019 0-123-310-020 0-123-315-002 0-123-320-001 0-123-320-006 0-123-320-007 17mm BORE, 49.5mm OD, 37mm W, 15.5mm DEEP, 22mm BELT, 14.5mm TO THE FIRST GROOVE, SIMILAR TO W050-15 BUT MOUNTING DEPTH W050-15 SERPENTINE PULLEY MERCEDES 13243 13367 14820 0-120-469-744 0-120-469-745 0-120-469-896 0-120-469-927 0-120-469-946 0-120-469-947 0-120-489-328 0-120-489-330 17mm BORE, 50mm OD, 37.8mm W, 5mm DEEP, 22mm BELT, 14mm TO FIRST GROOVE, SIMILAR TO W050-19 BUT MOUNTING DEPTH W050-18 SERPENTINE CLUTCH PULLEY VOLVO VOLVO PENTA 24-91104 5426 F-230401.6 F-230401.7 F-552923.1 11081 11091 11488 13801 13998 0-124-515-019 0-124-515-054 0-124-525-014 0-124-525-029 0-124-525-060 0-124-625-003 0-124-625-024 17mm BORE, 56mm OD, 37mm W, 8mm DEEP, 16x1.5 CCW THREAD, 23mm BELT, 5.5mm TO FIRST GROOVE, CCW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04, NOTE THREAD IS CCW, ALTERNATE W050-18N W050-20 SERPENTINE CLUTCH PULLEY CHRYSLER DODGE FREIGHTLINER MERCEDES MERCEDES HD 24-91265 24-91265-1 5395 F-233197.1 F-233197.2 F-233197.3 12382 12383 12384 12385 23021 23247 23248 0-124-325-039 0-124-325-046 0-124-325-093 0-124-515-064 0-124-515-114 0-124-615-019 0-124-615-033 0-124-615-042 0-124-625-006 17mm BORE, 50mm OD, 40mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 15mm TO FIRST GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04, ALTERNATE W050-20N Names and numbers are for reference purposes only 75

W050-20N SERPENTINE CLUTCH PULLEY-OE CHRYSLER DODGE FREIGHTLINER MERCEDES MERCEDES HD 24-91265 24-91265-1 F-233197.1 F-233197.2 F-233197.3 F-233197.5 12382 12383 12384 12385 23021 23247 23248 0-124-325-039 0-124-325-046 0-124-325-093 0-124-515-064 0-124-515-114 0-124-615-019 0-124-615-033 0-124-615-042 0-124-625-006 17mm BORE, 50mm OD, 40mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 14.5mm TO FIRST GROOVE, CW, CLUTCH, OE, USE INSTALLATION TOOL W19-03, W19-04, ALTERNATE W050-20 W050-22N SERPENTINE CLUTCH PULLEY MERCEDES HD F-233834.03 F-233834.1 F-233834.2 12387 12388 12389 0-120-468-143 0-124-555-002 0-124-555-022 0-124-655-002 0-124-655-016 0-124-655-023 6-033-GB3-023 17mm BORE, 57mm OD, 45.3mm W, 11mm DEEP, 16x1.5 THREAD, 29mm BELT, 11.8mm TO FIRST 8 GROOVE, CW, CLUTCH, INA, OEM, USE W050-24N SERPENTINE CLUTCH PULLEY MERCEDES 24-91282-3 5461 F-232001.04 F-232001.05 F-232001.06 F-232001.09 13954 23285 0-124-515-062 0-124-515-088 0-124-515-198 0-124-615-022 0-124-615-028 17mm BORE, 56mm OD, 11mm DEEP, 16x1.5 THREAD, 25mm BELT, 14mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, INA, OEM, USE W050-21 SERPENTINE CLUTCH PULLEY PORSCHE VOLVO PENTA W050-23N SERPENTINE CLUTCH PULLEY MERCEDES HD W050-25 SERPENTINE CLUTCH PULLEY BMW 24-91103-3 5515 F-233525.04 F-233525.05 F-233525.1 11041 11130 11337 0-124-515-073 0-124-525-021 0-124-525-057 0-124-525-107 0-399-604-018 17mm BORE, 53mm OD, 33mm W, 16mm DEEP, 16x1.5 THREAD, 22mm BELT, 4.2mm TO FIRST GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04, ALTERNATE W050-21N 24-91284-3 24-91286-3 F-230283.1 F-230283.2 F-240423 12389 0-120-469-119 0-124-655-002 0-124-655-016 0-124-655-023 17mm BORE, 71mm OD, 44mm W, 11mm DEEP, 16x1.5 THREAD, 29mm BELT, 12mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH, INA, OEM, USE 24-91289-3 5458 F-236528 11077 11300 11301 23253 23254 23257 23775 0-121-615-010 0-121-615-110 0-121-715-012 0-121-715-112 0-124-515-098 0-124-525-042 0-124-525-045 0-124-525-048 0-124-525-059 17mm BORE, 49mm OD, 31.7mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 3.3mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 W050-21N SERPENTINE CLUTCH PULLEY PORSCHE VOLVO PENTA W050-24 SERPENTINE CLUTCH PULLEY MERCEDES W050-26 SERPENTINE CLUTCH PULLEY MERCEDES 24-91103-3 5515 F-233525.04 F-233525.05 F-233525.1 11041 11130 11337 0-124-515-073 0-124-525-021 0-124-525-057 0-124-525-107 0-399-604-018 17mm BORE, 53mm OD, 33mm W, 16mm DEEP, 16x1.5 THREAD, 22mm BELT, 4.2mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE, W19-04, ALTERNATE W050-21 76 24-91282 5461 F-232001.04 F-232001.05 F-232001.06 F-232001.09 13954 23285 0-124-515-062 0-124-515-088 0-124-515-198 0-124-615-022 0-124-615-028 17mm BORE, 56mm OD, 45mm W, 11mm DEEP, 16x1.5 THREAD, 25mm BELT, 14.7mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 Names and numbers are for reference purposes only 5463 F-235968.08 F-235968.9 11216 23269 0-124-625-014 0-124-625-019 0-124-625-033 0-124-625-045 17mm BORE, 50mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 11mm TO FIRST GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-06

W050-26N SERPENTINE CLUTCH PULLEY MERCEDES W050-28A SERPENTINE DECOUPLER PULLEY CHEVROLET W050-29 SERPENTINE CLUTCH PULLEY AUDI 24-91293-3 5463 F-235968.08 F-235968.9 11216 23269 0-124-625-014 0-124-625-019 0-124-625-033 0-124-625-045 17mm BORE, 50mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 11mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE 24-91314-4 6003 920797 11236 0-124-425-049 17mm BORE, 57mm OD, 9mm DEEP, 16x1.5 THREAD, 22mm BELT, 5mm TO FIRST GROOVE, CW, DECOUPLER, ZEN, ALTERNATE W050-28B, W050-28N, W052-15N 24-91256 5380 F-225635.6 F-225635.7 F-225653.11 11207 11208 11209 11210 11212 23320 23323 0-124-315-011 0-124-325-018 0-124-515-026 0-124-515-083 0-124-525-010 0-124-525-089 0-124-615-021 SG12B010 SG12B012 17mm BORE, 56mm OD, 36mm W, 11mm DEEP, 16x1.5 THREAD, 18mm BELT, 5.5mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 W050-27 SERPENTINE CLUTCH PULLEY DODGE PORSCHE W050-28B SERPENTINE DECOUPLER PULLEY CHEVROLET W050-29N SERPENTINE CLUTCH PULLEY AUDI 24-91109 5519 F-556234.01 F-556234.02 11235 11239 11338 0-124-525-105 0-124-525-106 0-124-525-129 0-124-525-154 0-124-525-156 17mm BORE, 58mm OD, 38mm W, 11mm DEEP, 16x1.5 THREAD, 29mm BELT, 4.5mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, ALTERNATE W050-27N 24-91314-4 920797 95.000.10 ZM-95.000.10 11236 0-124-425-049 17mm BORE, 57mm OD, 9mm DEEP, 16x1.5 THREAD, 22mm BELT, 5mm TO FIRST GROOVE, CW, DECOUPLER, ZM, ALTERNATE W050-28A, W050-28N, W052-15N 24-91256 24-91256-3 5380 F-225635.6 F-225635.7 F-225653.11 11207 11208 11209 11210 11212 23320 23323 0-124-315-011 0-124-325-018 0-124-515-026 0-124-515-083 0-124-525-010 0-124-525-089 0-124-615-021 SG12B010 SG12B012 17mm BORE, 56mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 18mm BELT, 5mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, INA, OEM, USE W050-27N SERPENTINE CLUTCH PULLEY DODGE PORSCHE W050-28N SERPENTINE DECOUPLER PULLEY CHEVROLET SAAB W050-30 SERPENTINE CLUTCH PULLEY 24-91109 5519 F-556234.01 F-556234.02 11235 11239 11338 0-124-525-105 0-124-525-106 0-124-525-129 0-124-525-154 0-124-525-156 17mm BORE, 58mm OD, 36mm W, 11mm DEEP, 16x1.5 THREAD, 29mm BELT, 4.6mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH, INA, OEM, USE, ALTERNATE W050-27 24-91314-4 5571 6003 920797 ZM-95.000.10 11236 0-124-425-049 17mm BORE, 57mm OD, 45mm W, 9mm DEEP, 16x1.5 THREAD, 22mm BELT, 5mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE, CAP W115-227N, SEE ALTERNATE W050-28A, W050-28B, W052-15N 24-91309 5508 920629 11043 11186 0-124-425-033 0-124-525-017 17mm BORE, 57mm OD, 6.5mm DEEP, 16x1.5 THREAD, 18mm BELT, 18.5mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, ALTERNATE W050-30N Names and numbers are for reference purposes only 77

W050-30N SERPENTINE DECOUPLER PULLEY SAAB W050-32 SERPENTINE CLUTCH PULLEY W050-35 SERPENTINE CLUTCH PULLEY DEUTZ-ALLIS JOHN DEERE 24-91309 24-91309-4 6007 920629 95.000.01 ZM-95.000.01 11043 11186 24-91298 5505 F-551357.01 11460 24-91308 24-91308-3 5534 F-233379 F-233379.01 F-233379.02 12370 12379 12780 12781 12783 0-124-425-033 0-124-525-017 0-124-525-095 0-124-525-103 0-123-315-501 0-123-512-500 0-124-325-166 0-124-515-126 0-124-615-043 17mm BORE, 57mm OD, 6.5mm DEEP, 16x1.5 THREAD, 18mm BELT, 18.5mm TO FIRST GROOVE 5 GROOVE, CW, DECOUPLER, LITENS, USE INSTALLATION TOOL W19-08 17mm BORE, 56mm OD, 41.5mm W, 12mm DEEP, 16x1.5 THREAD, 18mm BELT, 18mm TO FIRST GROOVE 5 GROOVE, CCW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, USE CAUTION WHEN REMOVING, NOTICE THE CW VERSION W050-31 17mm BORE, 56mm OD, 39mm W, 9mm DEEP, 16x1.5 THREAD, 4mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, ALTERNATE W050-35N W050-31 SERPENTINE CLUTCH PULLEY W050-33 SERPENTINE CLUTCH PULLEY W050-35N SERPENTINE CLUTCH PULLEY AUDI DAF JOHN DEERE 24-91258 24-91258-3 5385 F-226556.51 F-230147.2 F-240138.01 11254 11566 24-91266 24-91266-3 24-91266-4 5403 F-558404 F-563432 21890 21891 24-91308 24-91308-3 5534 F-233379 F-233379.01 F-233379.02 12780 12781 12783 0-124-525-102 0-124-525-215 0-124-525-547 0-124-315-019 0-124-315-027 0-124-325-100 0-124-325-166 0-124-515-126 0-124-615-043 17mm BORE, 56mm OD, 42.5mm W, 11mm DEEP, 16x1.5 THREAD, 18mm BELT, 18.5mm TO FIRST 5 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 17mm BORE, 59mm OD, 9mm DEEP, 16x1.5 THREAD, 25mm BELT, 5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 17mm BORE, 56mm OD, 38.5mm W, 8mm DEEP, 16x1.5 THREAD, 4.5mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH, INA, OEM, USE, ALTERNATE W050-35 W050-31N SERPENTINE CLUTCH PULLEY AUDI PONTIAC W050-34N SERPENTINE DECOUPLER PULLEY DEUTZ-ALLIS JOHN DEERE W050-36N SERPENTINE CLUTCH PULLEY MINI COOPER 24-91258-3 F-226556.51 F-230147.2 F-240138.01 F-240138.02 F-240138.03 11254 11313 11566 24-91310 24-91310-4 920650 12370 12379 F-560565 11335 11336 23561 0-124-525-102 0-124-525-215 0-124-525-547 TG13S035 17mm BORE, 56mm OD, 16x1.5 THREAD, 37.3mm W, 11mm DEEP, 18mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, INA, OEM, USE 0-123-315-501 0-123-512-500 17mm BORE, 56mm OD, 70mm W, 16x1.5 THREAD, 4mm TO FIRST GROOVE 8 GROOVE, CW, DECOUPLER, LITENS, OEM, USE, CAP W115-228N 0-121-615-012 0-121-615-027 0-121-615-127 0-125-711-011 0-125-711-078 17mm BORE, 49.5mm OD, 37.5mm W, 11mm DEEP, 16x1.5 THREAD, 13.5mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE 78 Names and numbers are for reference purposes only

W050-37N SERPENTINE CLUTCH PULLEY BUICK W050-40N SERPENTINE CLUTCH PULLEY OPEL VAUXHALL AUDI W050-43 CLUTCH PULLEY F-550371.01 11232 0-124-425-063 17mm BORE, 56mm OD, 34.7mm W, 8mm DEEP, 16x1.5 THREAD, 23mm BELT, 4.6mm TO FIRST GROOVE 24-91327 F-553322.01 11501 0-124-425-060 17mm BORE, 54mm OD, 40mm W, 8mm DEEP, 16x1.5 THREAD, 19mm BELT, 17.8mm TO FIRST GROOVE 5 GROOVE, CLUTCH, INA, OEM, USE INSTALLATION TOOL W19-03 24-91304 5514 F-551406.01 F-551406.02 F-551406.07 11463 11495 20017 23827 0-121-715-042 0-121-715-049 0-121-715-077 0-121-715-078 0-124-525-114 0-124-525-146 17mm BORE, 49.5mm OD, 39.5mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 14.3mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 W050-38N SERPENTINE DECOUPLER PULLEY LANDROVER VOLVO W050-41N SERPENTINE DECOUPLER PULLEY SAAB AUDI W050-43N CLUTCH PULLEY 24-91335-4 535-0175-10 6028 920803 95.000.90 ZM-95.000.90 11345 11346 0-121-615-011 0-121-715-009 0-121-715-109 17mm BORE, 51mm, 68/62mm OD, 11mm DEEP, 16x1.5mm CCW THREAD 18 GROOVE, CCW, DECOUPLER, LITENS, OEM, COG GEAR DRIVEN, W19-03 TOOL, CAP W115-227N, RELATED W050-49N 24-91315-4 920801 95.000.03 ZM-95.000.03 11187 0-124-525-097 17mm BORE, 57mm OD, 45mm W, 6mm DEEP, 16x1.5mm THREAD, 22mm BELT, 20mm TO FIRST, CW, DECOUPLER, LITENS, OEM, CAP W115-228N, SMALL SPLINE TOOL 24-91304 5514 F-551406.01 F-551406.02 F-551406.07 11463 11495 11817 20017 20305 23827 0-121-715-042 0-121-715-049 0-121-715-077 0-121-715-078 0-124-525-114 0-124-525-146 FG18T062 FG18T079 FG20S014 17mm BORE, 49.5mm OD, 40mm W, 11mm DEEP, 16x1.5mm THREAD, 22mm BELT, 14.5mm TO FIRST, CW, CLUTCH, INA, USE INSTALLATION TOOL W19-03 W050-39N SERPENTINE DECOUPLER PULLEY SAAB W050-42N SERPENTINE DECOUPLER PULLEY AUDI W050-44 SERPENTINE CLUTCH PULLEY MERCEDES 24-91316-4 6024 920850 11454 1000555 24-91324 6014 920851 95.000.05 ZM-95.000.05 11466 11612 11724 11727 5494 F-236127 F-236127.01 F-236127.02 F-236127.03 11307 11445 23964 0-124-525-143 0-399-604-021 0-399-604-029 17mm BORE, 53mm OD, 63.5mm W, 15mm DEEP, 16x1.5 THREAD, 22mm BELT, 41mm TO FIRST GROOVE, DECOUPLER, LITENS, OEM, THIS HAS A VERY SMALL SLPINE TOOL NEEDED TO REMOVE, CAP W115-227N 0-124-525-113 0-124-525-210 0-124-525-226 0-125-711-044 0-125-711-051 0-125-711-127 0-125-711-151 FG18T063 FG18T074 17mm BORE, 56mm OD, 41mm WIDE, 16x1.5 THREAD, 9mm DEEP, 12.6mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE, CAP W112-30N 0-121-715-011 0-121-715-015 0-121-813-020 0-124-625-004 0-124-625-017 17mm BORE, 50mm OD, 39mm W, 11mm DEEP, 16x1.5 THREAD, 25mm BELT, 10.5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 Names and numbers are for reference purposes only 79

W050-45 SERPENTINE CLUTCH PULLEY MERCEDES 24-91297-3 5566 F-239356 F-239356.01 11308 0-121-813-003 17mm BORE, 50mm OD, 43mm W, 11mm DEEP, 16x1.5 THREAD, 11mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, W19-04 W050-48 SERPENTINE CLUTCH PULLEY AUDI 24-91106 24-91106-3 5382 F-225653.4 F-225653.5 F-225653.8 21430 0-123-515-003 17mm BORE, 56mm OD, 36.6mm W, 16mm DEEP, 16x1.5 THREAD, 5.8mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 W052-03N SERPENTINE CLUTCH PULLEY AUDI DODGE LINDE MERCEDES SEAT SKODA 24-91255-3 5378 F-227628.4 F-227628.5 F-227628.6 F-227628.7 11019 11134 11149 11221 11257 11360 11563 13849 13851 13853 13942 13947 0-121-715-003 0-121-715-047 0-121-715-071 0-124-315-001 0-124-315-013 0-124-315-032 0-124-325-001 0-124-325-012 0-124-325-131 17mm BORE, 56mm OD, 41mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 14.5mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, 3.7mm SPACER INCLUDED, USE, OEM. NOT INTERCHANGEABLE WITH W052-10N DELCO W050-46N SERPENTINE CLUTCH PULLEY VOLVO W050-49N SERPENTINE DECOUPLER PULLEY LANDROVER VOLVO W052-55N SERPENTINE CLUTCH PULLEY AUDI PORSCHE 24-912101 24-91329 F-557564 11347 0-121-615-014 0-125-711-014 0-125-711-023 0-125-711-040 0-125-711-048 0-125-711-053 17mm BORE, 56mm OD, 34.5mm W, 11mm DEEP, 16x1.5 THREAD, 19mm BELT, 10.5mm TO FIRST 5 GROOVE, CW, CLUTCH, INA OEM, USE 920821 11345 11346 0-121-615-011 0-121-715-009 0-121-715-109 17mm BORE, CCW, DECOUPLER, LITENS, OEM, BELT SIDE SHAFT DRIVEN, W19-03 TOOL, USED WITH W050-38N 24-91290 24-91290-3 F-235449 F-235449.03 F-235449.2 F-235449.4 11061 11245 11281 11502 11582 11805 11824 11830 23346 0-124-615-026 10480486 FG18T041 FG18T070 FG23S025 FG23S028 FG23S073 LR1190-908C LR1190-919 17mm BORE, 56mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 5.2mm TO FIRST GROOVE 7 GROOVE, CW, INA, OEM, USE INSTALATION TOOL W19-03, CAP W112-31N CHRYSLER W050-47N SERPENTINE CLUTCH PULLEY BMW 24-91113 F-554007.02 F-554007.03 11302 11362 20446 0-121-715-016 0-121-715-017 0-121-715-018 0-121-715-116 0-121-715-118 17mm BORE, 49mm OD, 34.2mm W, 11mm DEEP. 16x1.5 THREAD, 25mm BELT, 3mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, INA OEM, USE 80 W052-03 SERPENTINE CLUTCH PULLEY AUDI LINDE MERCEDES SEAT SKODA 24-91255 5378 F-227628.4 F-227628.5 F-227628.6 F-227628.7 11019 11134 11149 11221 11257 11360 11563 13849 13851 13853 13942 13947 0-121-715-003 0-124-315-001 0-124-315-032 0-124-325-001 0-124-325-131 0-124-515-010 0-124-525-050 0-124-525-066 0-124-525-091 17mm BORE, 56mm OD, 42.5mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 15mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, ALTERNATE W052-03N. WITHOUT SPACER Names and numbers are for reference purposes only C05-00 CHRYSLER DOUBLE PULLEY CHRYSLER DODGE PLYMOUTH 24-3105 7002 7552 5227267 5233199 5233472 17mm BORE, 75mm OD, 32mm W, 7.5mm DEEP, 10mm BELT, 10.5mm TO FIRST GROOVE 2 GROOVE

DELCO DELCO DELCO D05-01 DELCO DOUBLE PULLEY ALLIS-CHALMERS AMC AUSTIN WESTERN BUICK CADILLAC CASE 24-1110 7111 7122 1100661 1100664 1100707 1100709 1100790 1100797 1100841 1100916 17mm BORE, 69mm OD, 35mm W, 19mm DEEP, 10mm BELT, 10.5mm TO FIRST GROOVE 2 GROOVE DELCO D05-04 DELCO SERPENTINE PULLEY- 6 GRV CADILLAC 24-1269 7966-2 7969-2 10480008 10480009 10480116 1101578 1101579 1101847 21mm TAPERED BORE, 58mm OD, 39mm W, 14.5mm DEEP, 22mm BELT, 15mm TO FIRST GROOVE, NEEDS TAPERED COLLAR DELCO D05-07 DELCO SERPENTINE PULLEY-6 GRV BUICK CADILLAC CHEVROLET GMC HUMMER ISUZU 24-1272 8155-3 8156-3 8158-5 8160-11 8206-5 8216-5 8223-7 8224-11 8231-5 8234-5 8237 8238 10333165 10392759 10437987 10442782 10447094 10447096 10480017 10480043 10480072 17mm BORE, 57mm OD, 30mm W, 15.5mm DEEP, 22mm BELT, 6.5mm TO FIRST GROOVE, AD230, AD244, CS130D SERIES, ALTERNATE CLUTCH VERSION D05-12 DELCO D05-02 DELCO SERPENTINE PULLEY- 6 GRV CADILLAC 24-1262 7806-2 7863-2 7904-2 7934-12 7942-2 1101133 1101270 1101296 1101329 1101330 1101350 1101490 1101518 1101519 21mm TAPERED BORE, 57mm OD, 38mm W, 14mm DEEP, 22mm BELT, 15mm TO FIRST GROOVE, 17Si, CS144, NEEDS TAPERED COLLAR, AS OF 8/17/07 THEY ARE BLACK ANODIZED DELCO D05-05 DELCO SERPENTINE PULLEY- 6 GRV BUICK CHEVROLET GMC ISUZU OLDSMOBILE PONTIAC 24-1271 6783 8160-5 8160-7 8233-7 10479981 10479984 10480187 10480188 10480252 8000066 17mm BORE, 67mm OD, 29mm W, 15.5mm DEEP, 22mm BELT, 6.5mm TO FIRST GROOVE, CS130D, AS OF 5/2010 THESE ARE BLACK ANODIZED DELCO D05-08 DELCO SERPENTINE PULLEY-6 GRV AMC BUICK CADILLAC CHEVROLET DODGE EAGLE 24-1255-3 7127-12 7128 7134-12 7134-6 7134-6R 7134-9R 7135M 7137-12 7137-6 7137-6R 7137-9 7272 10479800 10479801 10479802 10479806 10479807 10479808 10479809 10479855 10479862 17mm BORE, 56mm OD, 31mm W, 15mm DEEP, 22mm BELT, 9.5mm TO FIRST GROOVE, 10SI, 12SI, 15SI, 17SI, CS121, CS130, CS144 SERIES DELCO D05-03 DELCO SERPENTINE PULLEY- 6 GRV BUICK CHEVROLET OLDSMOBILE PONTIAC 24-1281 8174-5 8194-7 8213-7 10480186 10480204 10480205 10480227 10480278 10480279 17mm BORE, 61mm OD, 36mm W, 15mm DEEP, 22mm BELT, 13.5mm TO FIRST GROOVE, CS144 D05-06 DELCO SERPENTINE PULLEY-5 GRV BUICK CHEVROLET OLDSMOBILE PONTIAC 24-1280 8197-7 8199-2 8208-2 8228-7 8275-2 8276-7 10480076 10480078 10480079 10480184 10480289 10480320 10480321 10480322 10480361 17mm BORE, 57mm OD, 27mm W, 15.5mm DEEP, 18mm BELT, 8mm TO FIRST GROOVE 5 GROOVE, CS130D D05-09 DELCO SERPENTINE PULLEY-6 GRV BUICK CHEVROLET OLDSMOBILE PONTIAC 24-1273 8155-3 8156-3 8222-3 8229-7 8230-7 8240-7 8249-7 8270-7 8271-7 8279 10449257 10480071 10480119 10480207 10480217 10480233 10480235 10480236 10480237 17mm BORE, 52mm OD, 30mm W, 15.5mm DEEP, 22mm BELT, 6.5mm TO FIRST GROOVE, CS130D Names and numbers are for reference purposes only 81

DELCO DELCO D05-10 DELCO SERPENTINE PULLEY-6 GRV BUICK CADILLAC CHEVROLET GMC HUMMER ISUZU D05-12N DELCO CLUTCH PULLEY-6 GRV CHEVROLET GMC OLDSMOBILE PONTIAC SAAB F05-00 SERPENTINE PULLEY-6 GRV MERCURY 24-1279 8156-3 8200-11 8224-11 8234-5 8235 8236 8243-5 8244 8272-11 8277 8278 8286 10333166 10437988 10442783 10447095 10447097 10480182 10480240 10480244 10480262 17mm BORE, 62mm OD, 30.5mm W, 22mm BELT, 6.5mm TO FIRST GROOVE, AD237, CS130D DELCO 24-1283-3 F-230753.3 F-230753.6 F-554765.02 8241 8293 8299 8489 8491-3 8499 10311493 10343535 10346705 10480341 15087020 15288860 15288861 15845337 15845338 17mm BORE, 57mm OD, 36mm W, 15mm DEEP,.668 x 20 THREAD, 22mm BELT, 6mm TO FIRST GROOVE, CW, CLUTCH PULLEY, OEM, USE, ALTERNATE D05-12 DELCO LEECE-NEVILLE 24-2264 7780 7786 7787 8308 3C3T-10300-CA F68U-10300-AD F6DU-10300-BB F6DU-10300-BC F6DU-10300-BD F77U-10300-AC F78U-10300-AA XL2U-10300-AA 17mm BORE, 64mm OD, 28mm W, 14.5mm DEEP, 22mm BELT, 5.5mm TO FIRST GROOVE, CAN BE USED IN LATE STYLE DE FRAMES, AS OF 8/17/07 THEY ARE BLACK ANODIZED D05-11 DELCO PULLEY-10SI SINGLE ALFA ROMEO ALLIS-CHALMERS AMC AUSTIN WESTERN BAKER BUICK 24-1103 24-1103-2 14327 14329 14331 14395 14582 14610 14894 14896 14921 14955 14984 20593 10479838 10480089 10480092 1100109 1100110 1100111 1100113 1100115 1100119 17mm BORE, 66mm OD, 18mm W, 4mm DEEP, 10mm BELT, 8.7mm TO FIRST GROOVE 1 GROOVE, COMMON 10, 12, 15, 17, 27Si SERIES, UNIVERSAL DELCO 24-1500 L05-00 DELCO/LEECE-NEVILLE PULLEY 22.3mm BORE, 79mm OD, 40mm W, 34mm W, 13mm BELT, WITH KEYWAY, 14.5mm TO FIRST GROOVE 2 GROOVE, NIEHOFF, DELCO 23Si, 25Si, 27Si, 29Si, 30Si, LEECE-NEVILLE JB SERIES DELCO F05-01 SERPENTINE PULLEY-6 GRV 4G MERCURY 24-2274 7780 8269 2F1U-10300-BB YF1U-10300-EA 17mm BORE, 75mm OD, 27.6mm W, 14.5mm DEEP, 22mm BELT, 5.5mm TO FIRST GROOVE, 4G D05-12 DELCO SERPENTINE CLUTCH PULLEY CHEVROLET GMC OLDSMOBILE PONTIAC SAAB 24-1283-1 5498 F-230753.3 F-230753.6 F-554765.02 8241 8293 8299 8489 8491-3 8499 10311493 10343535 10346705 10480341 15087020 15288860 15288861 15845337 15845338 17mm BORE, 57mm OD, 40mm W, 14mm DEEP,.668 x 20 THREAD, 22mm BELT, 6.5mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, USE, ALTERNATE D05-12N DOMESTIC THREAD 82 W052-55N SERPENTINE CLUTCH PULLEY AUDI PORSCHE 24-91290 24-91290-3 F-235449 F-235449.03 F-235449.2 F-235449.4 11061 11245 11281 11502 11582 11805 11824 11830 23346 0-124-615-026 10480486 FG18T041 FG18T070 FG23S025 FG23S028 FG23S073 LR1190-908C LR1190-919 17mm BORE, 56mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 5.2mm TO FIRST GROOVE 7 GROOVE, CW, INA, OEM, USE INSTALATION TOOL W19-03, CAP W112-31N Names and numbers are for reference purposes only F05-02 SERPENTINE PULLEY-6 GRV 4G LINCOLN MAZDA MERCURY 24-2272 7773 7787 8405 8511 1L2U-10300-AA 1L2U-10300-AB 5L8T-10300-LA 5L8T-10300-LC 6L8T-10300-BB 6S4T-10300-CC XW7U-10300-AA XW7U-10300-AD 17mm BORE, 53mm OD, 28.4mm W, 14.5mm DEEP, 22mm BELT, 5.3mm TO FIRST GROOVE, 4G, AS OF 8/17/07 THEY ARE BLACK ANODIZED

F05-03 SERPENTINE PULLEY-8 GRV 3G LINCOLN 24-2266 7764 7790 7791 8267 F65U-10300-BB F65U-10300-EA F7UU-10300-AB F7UU-10300-BB F7UU-10300-CB XL1U-10300-BB 17mm BORE, 59mm OD, 38.4mm W, 16.5mm DEEP, 28mm BELT, 9.2mm TO FIRST GROOVE 8 GROOVE, 3G F05-06 SERPENTINE PULLEY-6 GRV 3G LINCOLN MAZDA MERCURY 24-2257 24-2257-1 7749-3 7750 7751 7752 7756-3 7768 7769 7771 7775 7777 8253 8258 1L5U-10300-BB 1R3U-10300-AA 1R3U-10300-AB 1R3U-10300-AC 6L2T-10300-AD 7C2T-10300-AA 96BB-10300-AB 96BB-10300-AE F07F-10300-AA 17mm BORE, 65mm OD, 33mm W, 17.5mm DEEP, 22mm BELT, 9.4mm TO FIRST GROOVE, 3G-6G, CUT FOR LATE FRAMES F05-09 SERPENTINE PULLEY-8 GRV 6G 24-2270 7797 F81U-10300-DB F81U-10300-DC F81U-10300-DD 17mm BORE, 64mm OD, 36.5mm W, 14mm DEEP, 28mm BELT, 6.3mm TO FIRST GROOVE 8 GROOVE, 6G F05-04 SERPENTINE PULLEY-6 GRV 4G LINCOLN MAZDA MERCURY 24-2263 7773 7781 7787 8313 8403 3W1U-10300-AA 3W1U-10300-AB 5L8T-10300-KC 6L8T-10300-KA F5OU-10300-FA F5OU-10300-FB F6LU-10300-CA F6LU-10300-CB F6OU-10300-AA 17mm BORE, 59mm OD, 28mm W, 14.5mm DEEP, 22mm BELT, 5.5mm TO FIRST GROOVE, CUT OUT FOR LATE FRAMES, FOR 64mm SEE F05-00, AS OF 8/17/07 THEY ARE BLACK ANODIZED F05-07 SERPENTINE PULLEY-6 GRV 3G MAZDA MERCURY 24-2271 7792 8250 8252 8260 8263 8264 8309 1L8U-10300-AB 1S41-10300-AA 97BB-10300-AC 98AB-10300-EB 98BB-10300-CC WR2A-10300-AC XR3U-10300-AA XS91-10300-BB YF1U-10300-DA 17mm BORE, 49mm OD, 33mm W, 17mm DEEP, 22mm BELT, 9.4mm TO FIRST GROOVE, 3G 6G, REPLACES 52mm OD F05-10 SERPENTINE PULLEY-8 GRV 3G 24-2261-1 7768 7796 8251 8304 8316 2C3U-10300-BB 2C3U-10300-BC 2R3U-10300-BA F5UU-10300-BA F6UU-10300-EA F81U-10300-EB XL3U-10300-AA 17mm BORE, 64mm OD, 38.6mm W, 16.5mm DEEP, 28mm BELT, 9mm TO FIRST GROOVE 8 GROOVE, 3G-6G, CUT FOR LATE FRAMES F05-05 SERPENTINE PULLEY-6 GRV 3G 6G LINCOLN MAZDA MERCURY 24-2254 24-2254-1 11539 7748 7749-11 7750 7751 7753 7755-11 7756-3 7764 7765 7768 7770 1L5U-10300-AC 1L5U-10300-AD 1L5U-10300-AE 1L5U-10300-BA 1L8U-10300-CD 1L8U-10300-CE 1L8U-10300-DD 2C3U-10300-AA 2F1U-10300-DA 17mm BORE, 57mm OD, 33mm W, 17.3mm DEEP, 22mm BELT, 9.4mm TO FIRST GROOVE, 3G-6G, CUT FOR LATE FRAMES F05-08 SERPENTINE PULLEY-8 GRV 6G 24-2269 7798 7799 8306 8307 8445 8476 8478 8479 3C3T-10300-AA 3C3T-10300-AC 3C3T-10300-BA 3C3T-10300-EA 4C3T-10300-AA 4C3T-10300-BA 5C2T-10300-CA 5C3T-10300-BA 5C3T-10300-DA 17mm BORE, 69mm OD, 39.4mm W, 17mm DEEP, 28mm BELT, 9.2mm TO FIRST GROOVE 8 GROOVE, 6G, 6303 BEARING, SIMILAR TO F05-16 F05-11 SERPENTINE PULLEY-6 GRV 1G LINCOLN MERCURY 24-2252 24-2252-1 7078 7083 7088-10 7088-2 7716-10 7716-2 7732-10 7732-2 7735-10 7744-2 D9AF-10300-BA D9ZF-10300-AA E1AF-10300-CA E1EF-10300-LA E1ZF-10300-FA E43F-10300-FA E43F-10300-GA E53F-10300-EA E53F-10300-HA 17mm BORE, 49mm OD, 31.4mm W, 15mm DEEP, 22mm BELT, 9.3mm TO FIRST GROOVE, 1G, 2G Names and numbers are for reference purposes only 83

F05-12 CLUTCH PULLEY-6 GRV 6G LINCOLN F05-14A CLUTCH PULLEY-6 GRV F05-15N CLUTCH PULLEY-6GRV MAZDA MERCURY 24-2279 24-2279-3 5438 8303 8444 8516 3L74-10300-AA 3L74-10300-BA 3L74-10300-BB 4R3T-10300-BB 5L7T-10300-BB 7R3T-10300-DA 17mm BORE, 60mm OD, 37mm W, 16mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.3mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, USE, SIMILAR TO F05-13, W055-86 NOT INTERCHANGEABLE 24-2286 5524 F-235931 F-235931.02 8407 8418 2M5V-10300-AA 5S4T-10300-BB 5S4T-10300-BC 5S4T-10300-BD 17mm BORE, 54mm OD, 37mm W, 17mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.3mm TO FIRST GROOVE, CW, CLUTCH PULLEY, USE, ALTERNATE F05-14N OEM 24-2281 24-2281-3 F-237401.01 8402 8404 8512 5L8T-10300-MC 5S4T-10300-DA 6L8T-10300-CB 6S4T-10300-DC 17mm BORE, 53mm OD, 37.5mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 5.2mm TO THE FIRST, CW, CLUTCH PULLEY, INA, TOOL W19-03, ALTERNATE F05-15 F05-13N CLUTCH PULLEY-6 GRV 4GHO MERCURY F05-14N CLUTCH PULLEY-6 GRV F05-16 SERPENTINE PULLEY-8 GRV 6G H.D. 24-2278 24-2278-3 5497 F-233591 F-233591.02 8314 8436 24-2286 F-235931 F-235931.02 8407 8418 24-2273 8262-11 3R3U-10300-AA 3W3U-10300-AA 2M5V-10300-AA 5S4T-10300-BB 5S4T-10300-BC 5S4T-10300-BD F81U-10300-BC F81U-10300-BD 17mm BORE, 60mm OD, 37.5mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 5mm TO FIRST GROOVE, CW, CLUTCH PULLEY, USE, SIMILAR TO F05-12 17mm BORE, 54mm OD, 37mm W, 17mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.5mm TO FIRST GROOVE, CW, CLUTCH PULLEY, OEM, USE 17mm BORE, 69mm OD, 39.6mm W, 14mm DEEP, 28mm BELT, 9.3mm TO FIRST GROOVE 8 GROOVE, 6G, W02X-45 WIDE BEARING, SIMILAR TO F05-08 F05-14 CLUTCH PULLEY-6 GRV F05-15 CLUTCH PULLEY-6GRV MAZDA MERCURY W052-03 SERPENTINE CLUTCH PULLEY AUDI LINDE MERCEDES SEAT SKODA 24-2286 5524 F-235931 F-235931.02 8407 8418 2M5V-10300-AA 5S4T-10300-BB 5S4T-10300-BC 5S4T-10300-BD 17mm BORE, 54mm OD, 37mm W, 17mm DEEP, 16x1.5 THREAD, 22mm BELT, 9mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, USE, ALTERNATE F05-14A, F05-14N 84 5499 F-237401.01 8402 8404 8512 5L8T-10300-MC 5S4T-10300-DA 6L8T-10300-CB 6S4T-10300-DC 17mm BORE, 53mm OD, 37mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 5mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, TOOL W19-03 Names and numbers are for reference purposes only 24-91255 5378 F-227628.4 F-227628.5 F-227628.6 F-227628.7 11019 11134 11149 11221 11257 11360 11563 13849 13851 13853 13942 13947 0-121-715-003 0-124-315-001 0-124-315-032 0-124-325-001 0-124-325-131 0-124-515-010 0-124-525-050 0-124-525-066 0-124-525-091 17mm BORE, 56mm OD, 42.5mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 15mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, ALTERNATE W052-03N. WITHOUT SPACER

DELCO W052-55N SERPENTINE CLUTCH PULLEY AUDI PORSCHE W055-09 SERPENTINE PULLEY W055-141 V-BELT PULLEY HONDA ISUZU 24-91290 24-91290-3 F-235449 F-235449.03 F-235449.2 F-235449.4 11061 11245 11281 11502 11582 11805 11824 11830 23346 0-124-615-026 10480486 FG18T041 FG18T070 FG23S025 FG23S028 FG23S073 LR1190-908C LR1190-919 17mm BORE, 56mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 5.2mm TO FIRST GROOVE 7 GROOVE, CW, INA, OEM, USE INSTALATION TOOL W19-03, CAP W112-31N 24-81250 13937 14651 14661 LR165-708C LR170-721 LR180-704 LR180-769B LR190-704 LR190-704B LR190-709 LR190-709B LR190-711 17mm BORE, 63mm OD, 23.1mm W, 15mm DEEP, 15mm BELT, 6mm TO FIRST GROOVE 4 GROOVE, UPDATED VERSION, VERY SIMILAR TO W055-81 24-81100 24-81103 13285 13287 13531 13644 13778 14859 14960 LR150-711 LR160-723 LR160-723B LR160-724 LR160-725C LR160-727 LR170-734B LR170-757B LR170-765 17mm BORE, 74mm OD, 21mm W, 13.5mm TO FIRST GROOVE 1 GROOVE, W110-22 PULLEY NUT W055-03 V-BELT PULLEY W055-10 DOUBLE V-BELT PULLEY SUBARU W055-39 SERPENTINE PULLEY 24-81101 14655 LR170-701B 15mm BORE, 78mm OD, 22mm W, 16mm DEEP, 12.5mm BELT, 12.5mm TO FIRST GROOVE 1 GROOVE 14742 14745 LR155-18 LR160-138 LR160-166 17mm BORE, 72mm OD, 37.1mm W, 12mm BELT, 9mm TO FIRST GROOVE w/o SPACER 2 GROOVE 13637 13728 13827 13937 LR1100-722 LR170-748 LR170-748B LR180-751 LR180-769 17mm BORE, 60mm OD, 30mm W, 12mm DEEP, 22mm BELT, 8mm TO FIRST GROOVE W055-04 SERPENTINE PULLEY W055-118 CLUTCH PULLEY OPEL W055-41 SERPENTINE PULLEY 14717 14725 14979 A2T48195 LR170-702B LR170-717 15mm BORE, 74mm OD, 23.8mm W, 16mm DEEP, 15mm BELT, 9mm TO FIRST GROOVE 4 GROOVE, ALSO USED ON ALTERNATORS 24-81109 24-81109-3 5431 F-228751.2 F-228751.3 F-228751.6 23215 23873 LR1130-702 LR170-761B LR190-745 LR190-752 17mm BORE, 59mm OD, 40.3mm W, 11mm DEEP, 16x1.5 THREAD, 26mm BELT, 7mm TO FIRST GROOVE 7 GROOVE, CW, USE 13477 LR195-701 17mm BORE, 64mm OD, 25.6mm W, 11mm DEEP, 18mm BELT, 7.3mm TO FIRST GROOVE 5 GROOVE Names and numbers are for reference purposes only 85

INFINITI W055-42 SERPENTINE PULLEY HONDA W055-57 SERPENTINE PULLEY ISUZU KIA W055-67 SERPENTINE PULLEY 24-81104 13612 13638 13639 13657 13712 13713 13724 13826 13901 13934 13940 LR1100-703 LR1100-704 LR1100-704B LR1100-711B LR1100-712 LR1100-716 LR1100-716C LR1100-716E LR1100-725 17mm BORE, 63mm OD, 30mm W, 12mm DEEP, 22mm BELT, 8.3mm TO FIRST GROOVE 13564 LR160-726 LR160-726B 17mm BORE, 49mm OD, 27.2mm W, 15mm BELT 4 GROOVE 13334 13862 13936 LR170-738 LR170-738B LR170-738C LR170-738E OK012-18-300 OK30C-18-300 17mm BORE, 60mm OD, 24.5mm W, 11.5mm DEEP, 15mm BELT, 9.5mm TO FIRST GROOVE 4 GROOVE HONDA W055-44 SERPENTINE PULLEY ISUZU W055-60 SERPENTINE PULLEY SUBARU W055-68 SERPENTINE PULLEY 24-81105 24-81102 13757 13775 13825 13935 LR160-731 LR170-755 LR190-743 LR190-744 LR190-761 17mm BORE, 57.5mm OD, 34mm W, 11mm DEEP, 22mm BELT, 12.3mm TO FIRST GROOVE 11027 13789 LR1100-736C LR180-756B 17mm BORE, 58mm OD, 32.5mm W, 11mm DEEP, 18mm BELT, 14mm TO FIRST GROOVE 5 GROOVE 13275 13645 13829 LR170-732B LR170-732C LR185-701 LR185-701E LR185-701H LR185-702 LR185-702C LR190-742 17mm BORE, 55mm OD, 32.1mm W, 11.5mm DEEP, 18mm BELT, 14mm TO FIRST GROOVE 5 GROOVE INFINITI W055-56 SERPENTINE PULLEY W055-65 SERPENTINE PULLEY W055-87 SERPENTINE CLUTCH PULLEY SUZUKI 24-81107 24-81107-1 5500 F-232288.03 F-232288.1 F-232288.3 13261 13760 11119 11163 13939 LR1100-702 LR1110-701 LR1110-701B LR1110-702 17mm BORE, 59mm OD, 27mm W, 11mm DEEP, 22mm BELT, 5.2mm TO FIRST GROOVE 86 LR1100-709B 17mm BORE, 55mm OD, 30mm W, 11mm DEEP, 22mm BELT, 8mm TO FIRST GROOVE Names and numbers are for reference purposes only LR1100-734 LR1100-734B LR1100-734E LR1110-713C LR1110-724 LR1110-724B LR1110-726 LR1110-726B 17mm BORE, 52mm OD, 11mm DEEP, 16x1.5 THREAD, 42.3mm W, 22mm BELT, 13.2mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, USE, ALTERNATE, W055-87N INA

W055-87N SERPENTINE CLUTCH PULLEY 24-81107-3 F-232288.03 F-232288.1 F-232288.3 11163 13939 LR1100-734 LR1100-734B LR1100-734E LR1110-713C LR1110-726 LR1110-726B 17mm BORE, 52mm OD, 11mm DEEP, 16x1.5 THREAD, 40mm W, 22mm BELT, 13.3mm TO FIRST GROOVE, CW, CLUTCH PULLEY, INA, OEM, USE DELCO LEECE-NEVILLE W055-103 SERPENTINE PULLEY ACURA HONDA 13966 A2TB7591 17mm BORE, 60mm OD, 34mm W, 15mm DEEP, 25mm BELT, 8.3mm TO FIRST GROOVE 7 GROOVE W055-106 SERPENTINE CLUTCH PULLEY CHRYSLER DODGE JEEP 24-83278 5507 920810 11228 11231 11440 11548 11657 A2TJ0481ZC A2TJ1881ZC A2TJ1891ZC A2TX0281 A3TJ2581ZC 17mm BORE, 53mm OD, 36.6mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8mm TO FIRST GROOVE, CW, CLUTCH DESIGN, ZEN, TO REPLACE DECOUPLER, USE, ALTERNATE W055-106A W055-106B, W055-106N 24-1500 L05-00 DELCO/LEECE-NEVILLE PULLEY 22.3mm BORE, 79mm OD, 40mm W, 34mm W, 13mm BELT, WITH KEYWAY, 14.5mm TO FIRST GROOVE 2 GROOVE, NIEHOFF, DELCO 23Si, 25Si, 27Si, 29Si, 30Si, LEECE-NEVILLE JB SERIES MANDO W055-105 SERPENTINE CLUTCH PULLEY MAZDA MERCURY MOTOR SUBARU 24-83281 5511 F-238163 F-238163.01 F-238163.02 F-238163.04 11026 11376 11377 11409 11543 11556 13226 13996 A2TX0881A A3TG0081 A3TG3181 A3TG6191ZC A3TG6781ZC A3TL0081 A4TJ0181ZC A4TJ0182ZC 17mm BORE, 55mm OD, 39.5mm W, 16mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST, CW, CUT OUT REAR AREA FOR DE FRAME, USE, ALTERNATE W055-105N, NOTICE W055-106 W055-106A SERPENTINE DECOUPLER PULLEY CHRYSLER DODGE JEEP 6004 920810 11228 11231 11440 A2TJ0481ZC A2TX0281 A3TJ2581ZC 17mm BORE, 53mm OD, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST GROOVE, CW, DECOUPLER, ZEN, ALTERNATE W055-106, W055-106B, W055-106N HYUNDAI W055-69 MANDO SERPENTINE PULLEY W055-105N SERPENTINE CLUTCH PULLEY MAZDA MERCURY MOTOR SUBARU W055-106B DECOUPLER PULLEY CHRYSLER DODGE JEEP 13887 24-83281 F-238163 F-238163.01 F-238163.02 F-238163.04 F-238163.1 11026 11409 11543 11556 13226 13996 24-83278-4 920810 95.010.01 ZM-95.010.01 11228 11231 11440 AB112112 A2TX0881A A3TG0081 A3TG6191ZC A3TG6781ZC A4TJ0181ZC A4TJ0182ZC A2TJ0481ZC A2TX0281 A3TJ2581ZC 17mm BORE, 62mm OD, 27.5mm WIDE, 4mm DEEP, 22mm BELT, -1.5mm TO FIRST GROOVE 17mm BORE, 56mm OD, 36.5mm W, 16mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.3mm TO FIRST, CW, CLUTCH, INA, OEM, USE, ALTERNATE W055-105 17mm BORE, 53mm OD, 47.8mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST, CW, DECOUPLER, ZM, ALTERNATE W055-106, W055-106A, W055-106N Names and numbers are for reference purposes only 87

W055-106N DECOUPLER PULLEY CHRYSLER DODGE JEEP 24-83278-4 6004 920810 95.010.01 ZM-95.010.01 11228 11231 11440 W055-110B DECOUPLER PULLEY CHRYSLER 24-83301-4 920768 95.010.02 ZM-95.010.02 11115 11229 W055-116 PULLEY KIA MAZDA SMART CAR 11565 13445 13719 21155 A2TJ0481ZC A2TX0281 A3TJ2581ZC A3TJ0381ZC A3TJ1881ZC A2T33191 A2T33891 A2TB0191A A2TB0191B A2TB5891AC A5TG0991 17mm BORE, 53mm OD, 48.9mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-227N, ALTERNATE W055-106, W055-106A, W055-106B 17mm BORE, 57mm OD, 47.8mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST, CW, DECOUPLER, ZM, ALTERNATE W055-110N 17mm BORE, 55mm OD, 25.4mm W, 16mm DEEP, 15mm BELT, 10mm TO FIRST GROOVE 4 GROOVE, NOT INTERCHANGEABLE WITH W055-61 W055-109N SERPENTINE DECOUPLER PULLEY CHRYSLER PLYMOUTH PONTIAC W055-110N SERPENTINE DECOUPLER PULLEY CHRYSLER W055-117 SERPENTINE PULLEY CHRYSLER DODGE MOTOR 24-83302-4 6025 920542 920782 95.010.03 ZM-95.010.03 11097 11418 13955 24-83301-4 5520 6015 920768 95.010.02 ZM-95.010.02 11115 11229 11057 13886 A3TB1691ZC A3TG1581 A3TG4181 A3TJ0381ZC A3TJ1881ZC A3TA7692 A3TB3491ZC A3TB6491 17mm BORE, 57.5mm OD, 51.9mm W, 18mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-228N 17mm BORE, 57mm OD, 51.5mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8.3mm TO FIRST, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-228N, ALTERNATE W055-110B 17mm BORE, 60mm OD, 26.9mm W, 11.5mm DEEP, 22mm BELT, 4.5mm TO FIRST GROOVE, ALTERNATE W055-80 W055-11 SERPENTINE PULLEY W055-115 PULLEY W055-117A PULLEY MAZDA 14702 14906 12136 A2T41191 A2T44991 A7T03371 A7T03371AC 15mm BORE, 55mm OD, 23.5mm W, 4.9mm DEEP, 18mm BELT, 5.7mm TO FIRST GROOVE 5 GROOVE 17mm BORE, 73mm OD 13mm BELT, 9mm SPACER 2 DISSIMILAR HALVES, A70L-E70L 17mm BORE, 60mm OD, 27.5mm W, 15.5mm DEEP, 22mm BELT, 5.7mm TO FIRST GROOVE 88 Names and numbers are for reference purposes only

W055-12 SERPENTINE PULLEY MAZDA W055-123N SERPENTINE CLUTCH PULLEY W055-134N DECOUPLER PULLEY 24-83250 13196 13297 13299 A2T05892 A2T05892A A2T05893 A2T19991 A2T20091ZC A2T20191 15mm BORE, 60mm OD, 25mm W, 16.5mm DEEP, 12mm BELT, 13.5mm TO FIRST GROOVE 3 GROOVE 24-83280 24-83280-3 F-557045 F-557045.01 11343 11413 11414 11436 13258 A2TG1581AC A2TG1581ZC A2TJ0281ZC A2TJ0581 A2TJ1381 17mm BORE, 53mm OD, 39mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 14mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE 920022 11655 A3TX1382ZC 17mm BORE, 59mm OD, 40mm W, 17mm DEEP, 17x1.5 THREAD, 8.5mm TO FIRST GROOVE 4 GROOVE, CW, DECOUPLER, LITENS, OEM, CAP W112-30N, W19-08 TOOL W055-120 SERPENTINE PULLEY ACURA CHRYSLER HONDA W055-13 SERPENTINE PULLEY MERCURY W055-135N DECOUPLER PULLEY 24-83253 920024 11230 13649 13762 13892 A2TG0791ZC A3TB2491 A5TA0991ZC A5TA3591 A5TA4591ZC 17mm BORE, 62mm OD, 23.5mm W, 15mm DEEP, 15mm BELT, 8mm TO FIRST GROOVE 4 GROOVE, SIMILAR TO W055-47, W055-59 AND W055-81 13188 13189 13230 13277 13298 100211-3321 100211-7460 A3T00491 A3T00896 A3T01496 A3T01596 A3T12792 15mm BORE, 54mm OD, 32mm W, 11.5mm DEEP, 22mm BELT, 9mm TO FIRST GROOVE FOR V-BELT VERSION USE W055-24 11535 11551 11668 A003TX1381ZC A2TX2581ZC A2TX2681ZC 17mm BORE, 52mm OD, 40mm W, 17mm DEEP, 15mm BELT, 17x1.5 THREAD, 8.5mm TO FIRST GROOVE 4 GROOVE, CW, DECOUPLER, LITENS, OEM, CAP W112-30N, TOOL W19-08 W055-121 SERPENTINE CLUTCH PULLEY W055-133N SERPENTINE DECUPLER PULLEY HONDA W055-136N DECOUPLER PULLEY DODGE JEEP 24-93291 5522 F-552386.01 21339 23917 23918 A2TX1781 A3TG2681AE A3TJ0781 A3TJ0781AE 17mm BORE, 65mm OD, 11.5mm DEEP, W, 17x1.5 THREAD, 25mm BELT, 5.5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH PULLEY, ZEN, USE 24-83306-4 920025 95.010.05 ZM-95.010.05 14489 A5TL0581ZC 17mm BORE, 57mm OD, 40.5mm W, 17mm DEEP, 17x1.5 THREAD, 9mm TO FIRST GROOVE 7 GROOVE, CW, DECOUPLER, LITENS, OEM, CAP W112-30N, W19-08 TOOL 920032 11553 11554 11638 A2TL0381ZC A2TX3481ZC A2TX3581ZC 17mm BORE, 52mm OD, 40.5mm W, 17mm DEEP, 17x1.5 THREAD, 8.5mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N Names and numbers are for reference purposes only 89

W055-140 PULLEY CHRYSLER DODGE EAGLE HONDA MOTOR PLYMOUTH 24-83270 13580 13648 13735 A2T81192 A2T81291 A2T81292 A2T81391 A2TA2191 A2TB1491 A2TB2791 17mm BORE, 67mm OD, 23.5mm WIDE, 15.5mm DEEP, 15mm BELT, 8.4mm TO FIRST GROOVE 4 GROOVE W055-15 DOUBLE V-BELT PULLEY CHRYSLER DODGE PLYMOUTH 24-83100 14557 A4T25172 A4T25191 A4T25199 A4T30399 15mm BORE, 66mm OD, 30.7mm W, 7mm DEEP, 9.5mm BELT, 9.5mm TO FIRST GROOVE 2 GROOVE W055-22 SERPENTINE PULLEY DODGE EAGLE HYUNDAI MOTOR PLYMOUTH 24-83269 13249 13271 13289 14436 A2T14792 A2T49992 A3T03392 A3T03393 A3T03492 A3T03493 A3T45693 AB175002 AB175015 15mm BORE, 65mm OD, 20mm W, 15.5mm DEEP, 15mm BELT, 5mm TO FIRST GROOVE 4 GROOVE W055-142 SERPENTINE CLUTCH PULLEY MAZDA W055-17 SERPENTINE PULLEY DODGE HYUNDAI MOTOR PLYMOUTH W055-24 V-BELT PULLEY MERCURY 24-83295 5597 F-552714.02 24-83252 24-83103 11169 11439 14708 14950 13190 A3TJ1181 A3TJ3281A A1T01991 A1T40791 A1T40891 A2T49891 AB155001 A3T01598 17mm BORE, 60mm OD, 37mm W, 16.5mm DEEP, 17x1.5 THREAD, 8mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN,, NOT INTERCHANGED WITH W055-86 15mm BORE, 55mm OD, 24mm W, 16mm DEEP, 15mm BELT, 9mm TO FIRST GROOVE 4 GROOVE 15mm BORE, 75mm OD, 32.5mm W 11mm DEEP, 9.5mm BELT, 24mm TO FIRST GROOVE 1 GROOVE, FOR SERPENTINE VERSION USE W055-13. W055-147N SERPENTINE CLUTCH PULLEY W055-18 SERPENTINE PULLEY DODGE MOTOR W055-25 SERPENTINE PULLEY MERCURY 535027310 F-600038 11548 11657 24-83254 14706 14708 14709 14950 24-83258 13212 A2TJ1881ZC A2TJ1891ZC A1T40391 A1T40491 A2T41791 A2T41991 A4T00796 17mm BORE, 53mm OD, 36.6mm W, 17mm DEEP, 17x1.5 THREAD, 22mm BELT, 8mm TO FIRST GROOVE, CW, CLUTCH, OEM INA, INSTALLATION TOOL W19-03 15mm BORE, 55mm OD, 27mm W, 15mm BELT, 12mm TO FIRST GROOVE 4 GROOVE, INCLUDES SPACER 17mm BORE, 55mm OD, 39mm W, 30mm BELT, 9.3mm TO FIRST GROOVE 8 GROOVE 90 Names and numbers are for reference purposes only

W055-32 SERPENTINE PULLEY HONDA 24-83251 13265 13266 W055-36 SERPENTINE PULLEY DODGE MOTOR PLYMOUTH SUBARU 24-83266 13303 13480 14427 14706 W055-46 SERPENTINE PULLEY CHEVROLET GEO SUZUKI 13336 13780 A1T01591 A1T02291 A1T04691 A1T04791 A1T03391 A1T03791 A2T43791 A2T48691 A5TA0791 A5TA3891ZC 15mm BORE, 57mm OD, 19.8mm W, 16mm DEEP, 11mm BELT, 8.3mm TO FIRST GROOVE 3 GROOVE 15mm BORE, 54mm OD, 21.5mm W, 15.5mm DEEP, 15mm BELT, 6.5mm TO FIRST GROOVE. 4 GROOVE 17mm BORE, 55mm OD, 23.5mm W, 16mm DEEP, 15mm BELT, 8.5mm TO FIRST GROOVE 4 GROOVE 24-83257 W055-33 SERPENTINE PULLEY W055-37 V-BELT PULLEY CLARK DODGE MAZDA MERCURY MOTOR 24-83101 W055-47 SERPENTINE PULLEY DODGE EAGLE MAZDA MOTOR PLYMOUTH 14720 A2T48298 17mm BORE, 60.5mm OD, 48.7mm W, 15.5mm DEEP, 15/22mm BELT, 6.8mm TO FIRST GROOVE 4/ 12133 12231 13259 13295 14213 14267 14268 14307 14428 14430 14432 14438 A0T25371 A0T25471 A1T24471 A1T34672 A1T41171 A2T02271 A2T02471 A2T03072 A2T03471 15mm BORE, 68mm OD, 10mm BELT, 3.5mm DEEP, 10mm TO FIRST GROOVE HALF, 2 PIECES MAKE A SET 11224 13251 13430 13439 13751 13787 A2T34892 A2T35092 A2TA4991 A2TA5391 A2TC0591A A2TJ0091 A5T00192 17mm BORE, 59mm OD, 22.7mm W, 16mm DEEP, 15mm BELT, 7.8mm TO FIRST GROOVE 4 GROOVE W055-35 V-BELT PULLEY ALLIS-CHALMERS DEUTZ-ALLIS DODGE MASSEY FERGUSO MAZDA 24-83102 12129 13211 13227 13231 13238 13282 13292 13314 13432 14432 14438 14700 A2T03477 A2T07577 A2T13977 A2T18277 A2T19677 A2T19877 A2T41677 A2T49977 A3T41876 15mm BORE, 74mm OD, 13mm BELT 1 GROOVE, WITHOUT SPACER W055-45 SERPENTINE PULLEY CHRYSLER DODGE 13577 A3T14292 17mm BORE, 52mm OD, 27mm W, 16mm DEEP, 18mm BELT, 8.3mm TO FIRST GROOVE 5 GROOVE W055-48 SERPENTINE PULLEY CHRYSLER DODGE PLYMOUTH 13764 A3TA4191ZC 17mm BORE, 64mm OD, 30.5mm W, 15.5mm DEEP, 22mm BELT, 8.6mm TO FIRST GROOVE, CAN REPLACE W055-66 Names and numbers are for reference purposes only 91

SAAB W055-49 SERPENTINE PULLEY SUBARU W055-58 SERPENTINE PULLEY DODGE MOTOR W055-62 SERPENTINE PULLEY MOTOR 11058 13479 13752 13820 13889 A002TG1891 A2T39091 A2TA7691 A2TB2891 A2TB2891ZC A2TB2991 A2TG0391 17mm BORE, 55mm OD, 34mm W, 15.5mm DEEP, 18mm BELT, 15.5mm TO FIRST GROOVE 5 GROOVE 13596 13597 13703 13749 13886 A3T12291 A3T12291A A3T12491 A3TA2291 A3TA2291A A3TA4091 A3TA7691 A4T03191 17mm BORE, 65mm OD, 26.3mm W, 11.5mm DEEP, 22mm BELT, 4.4mm TO FIRST GROOVE, DEEP CUTOUT ON THE BACK, CAN REPLACE W055-62 13749 A3TA4091 17mm BORE, 65mm OD, 26.5mm W, 11.5mm DEEP, 22mm BELT, 4mm TO FIRST GROOVE, ***NLA WHEN STOCK DEPLETED*** ALTERNATE W055-58 W055-50 SERPENTINE PULLEY MAZDA W055-59 SERPENTINE PULLEY EAGLE HYUNDAI KIA MOTOR W055-66 SERPENTINE PULLEY ACURA HONDA 24-83274 13446 11311 11452 13585 13586 13893 A3T08491 2608371 2655635 A2T82791 A2T82792 A2TA0892 A5TA7091ZC A5TA7191ZC 17mm BORE, 55mm OD, 25.7mm W, 12mm DEEP, 18mm BELT, 7.2mm TO FIRST GROOVE 5 GROOVE 17mm BORE, 60mm OD, 23.3mm W, 16mm DEEP, 15mm BELT, 8.5mm TO FIRST GROOVE 4 GROOVE, SIMILAR TO W055-47, W055-81, W055-120 17mm BORE, 62.5mm OD, 30.5mm W, 15.5mm DEEP, 22mm BELT, 8.5mm TO FIRST GROOVE, ALTERNATE W055-48 64mm OD MERCURY W055-55 SERPENTINE PULLEY MOTOR W055-61 SERPENTINE PULLEY MAZDA W055-80 SERPENTINE PULLEY CHRYSLER DODGE 24-83262 13473 14473 24-83264 13511 13575 A3TA1091 A3TA1391 A3T07592 A2TA3791 A2TA7491 17mm BORE, 65mm OD, 27mm W, 15.5mm DEEP, 18mm BELT, 8.5mm TO FIRST GROOVE 5 GROOVE 17mm BORE, 60mm OD, 25.9mm W, 16mm DEEP, 15mm BELT, 11mm TO FIRST GROOVE 4 GROOVE, NOT INTERCHANGEABLE WITH W055-116 17mm BORE, 57.5mm OD, 27mm W, 12.5mm DEEP, 22mm BELT, 4.5mm TO FIRST GROOVE 92 Names and numbers are for reference purposes only

W055-81 SERPENTINE PULLEY CHRYSLER DODGE EAGLE INFINITI MOTOR 12647 13451 13478 13584 13586 13616 13716 13717 13995 A2T33593A A2T33593B A2T37791B A2T38391 A2T80591 A2T81791 A2TA0891 A2TG0191ZC A3TA2391A 17mm BORE, 64mm OD, 23mm W, 15.5mm DEEP, 15mm BELT, 8mm TO FIRST GROOVE 4 GROOVE, SIMILAR TO W055-47, W055-59, ALTERNATE W055-120 W055-84N SERPENTINE DECOUPLER PULLEY MERCURY 24-83275 24-83303-4 920004 95.010.04 ZM-95.010.04 11026 11543 A4TJ0181ZC A4TJ0182ZC 17mm BORE, 53mm OD, 49mm W, 17mm DEEP, 17x1.5 THREAD, 8mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, USE INSTALLATION TOOL W19-08, CAP W115-227N, ALTERNATE W055-84 W055-90 SERPENTINE PULLEY INFINITI MOTOR 24-83283 11056 11340 11341 11438 11557 13949 A3TB2891 A3TG2291 A3TJ1791B A3TJ1791ZC A3TJ1991 A3TJ1991B A3TJ3691ZC 17mm BORE, 55mm OD, 33.6mm W, 15.5mm DEEP, 25mm BELT, 8mm TO FIRST GROOVE 7 GROOVE W055-81A SERPENTINE PULLEY 17mm BORE, 64mm OD, 23mm W, 15.5mm DEEP, 15mm BELT, 8mm TO FIRST GROOVE 4 GROOVE, SIMILAR TO W055-47, W055-59, ALTERNATE W055-81, W055-120 W055-86 SERPENTINE CLUTCH PULLEY MAZDA 24-2280 5419 F-232600 F-232600.01 13883 A3TB1081 A3TB1081A 17mm BORE, 60mm OD, 16mm DEEP, 39.5mm W, 17x1.5 THREAD, 22mm BELT, 9mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, REMOVAL TOOL W19-03, SIMILAR TO F05-12, F05-13, NOTICE THREADS AND MOUNT W055-91 SERPENTINE PULLEY INFINITI MAZDA MOTOR 11004 11006 11007 11029 11051 11052 11053 11315 11316 11317 11412 A3T13691 A3TB1791 A3TB4291 A3TB5291ZC A3TG0191 A3TG0391 A3TG2491ZC A3TG4491 A3TJ0191 17mm BORE, 60mm OD, 31mm W, 16mm DEEP, 22mm BELT, 9mm TO FIRST GROOVE W055-84 SERPENTINE CLUTCH PULLEY MERCURY W055-89 SERPENTINE PULLEY CHRYSLER DODGE MOTOR W055-92 SERPENTINE PULLEY MAZDA 24-83275 5406 11026 11543 13750 13840 13898 13929 11008 11174 11398 A4TJ0181ZC A4TJ0182ZC A2TA5191 A2TA5393ZC A2TB5791ZC A3TB2291ZC A3TG1391A A3TG4791 A3TJ1091 17mm BORE, 55mm OD, 11mm DEEP, 36mm W, 17x1.5 THREAD, 22mm BELT, 4mm TO FIRST GROOVE, CW, CLUTCH VERSION, ZEN, USE, ALTERNATE W055-84N OR W055-105/W055-105N WITH SPACE ATTACHED 17mm BORE, 60mm OD, 27.2mm W, 17mm DEEP, 18mm BELT, 8.5mm TO FIRST GROOVE 5 GROOVE 17mm BORE, 49mm OD, 31mm W, 16mm DEEP, 22mm BELT, 8.2mm TO FIRST GROOVE Names and numbers are for reference purposes only 93

W055-93 SERPENTINE PULLEY MOTOR W055-00 V-BELT PULLEY W055-05 SERPENTINE PULLEY HONDA 24-82105 24-82254 11028 14668 14756 A3TB5491 100211-2030 100211-1080 100211-1081 100211-1111 17mm BORE, 65mm OD, 34.4mm W, 16.5mm DEEP, 22mm BELT, 12mm TO FIRST GROOVE 15mm BORE, 67mm OD, 18.9mm W, 12mm DEEP, 9.5mm BELT, 11.5mm TO FIRST GROOVE 1 GROOVE. USED WITH SMALL BEARING W02X-21. FOR LARGE BEARING W02X-19 OR W02X-38, USE PULLEY W055-30. 15mm BORE, 75mm OD, 23mm W, 3mm DEEP, 15mm BELT, 4.9mm TO FIRST GROOVE 4 GROOVE W055-94 SERPENTINE PULLEY SUBARU 11024 A3TG2391ZC 17mm BORE, 55mm OD, 35.5mm W, 15mm DEEP, 18mm BELT, 16.5mm TO FIRST GROOVE 5 GROOVE W055-01 SERPENTINE PULLEY DAIHATSU ISUZU 13414 13521 100211-6990 101211-0830 15mm BORE, 45mm OD, 24mm W, 16mm BELT, 9mm TO FIRST GROOVE. 4 GROOVE W055-06 SERPENTINE PULLEY ACURA CHRYSLER DODGE HONDA PLYMOUTH 24-82258 11100 13184 13185 13245 13280 13309 13353 13395 13529 13540 13674 13677 100211-8550 101211-5410 101211-5420 101211-5430 101211-5690 101211-9250 101211-9310 101211-9330 101211-9970 17mm BORE, 63mm OD, 23mm W, 10.5mm DEEP, 15mm BELT, 8.7mm TO FIRST GROOVE. 4 GROOVE, SIMILAR TO W055-52 MOTOROLA W056-01 MOTOROLA V-BELT CONVERSION PULLEY W055-02 SERPENTINE PULLEY W055-07 SERPENTINE PULLEY 16mm BORE, 68.5mm OD, 27mm W, 16mm DEEP, 9.5mm BELT, 20mm TO FIRST GROOVE 1 GROOVE, CONVERTS LONG SHAFT TO EXTENDED SHAFT STYLE WITH THE USE OF THE OLD SPACER 94 24-82252 14679 100211-1050 100211-1180 100211-2050 15mm BORE, 55mm OD, 29mm W, 12mm DEEP, 18mm BELT, 10mm TO FIRST GROOVE. 5 GROOVE, USED WITH SMALL BEARING W02X-21. FOR LARGE BEARING SEE W055-31 Names and numbers are for reference purposes only 24-82253 14643 22177 100211-1030 100211-1031 100211-1091 100211-2061 100211-2160 100211-3111 15mm BORE, 59mm OD, 35.3mm W, 12mm DEEP, 25mm BELT, 9.5mm TO FIRST GROOVE 7 GROOVE, USED WITH SMALL BEARING W02X-21, AND CAN BE USED FOR THE LARGER W02X-19 BUT THE BELT ALIGNMENT WILL BE OFF BY 1mm

W055-08 SERPENTINE PULLEY ACURA DAIHATSU HONDA STERLING 24-82251 13239 13508 14755 14757 14759 14931 14935 14989 100211-1260 100211-1270 100211-1271 100211-1351 100211-1361 100211-1371 100211-1381 100211-2130 100211-2210 15mm BORE, 58mm OD, 22.3mm W, 11mm DEEP, 11mm BELT, 9.5mm TO FIRST GROOVE 3 GROOVE W055-102 SERPENTINE PULLEY MINI COOPER 11049 102211-2230 102211-2233 17mm BORE, 49mm OD, 49.5mm W, 10.5mm DEEP, 22mm BELT, 26.5mm TO FIRST GROOVE W055-107A DECOUPLER PULLEY LEXUS 24-82290-4 6005 920726 920954 11136 11137 11196 11322 11323 11325 11326 11510 11514 11517 14072 104210-1091 104210-2050 104210-2070 104210-2080 104210-2090 104210-2100 104210-2140 104210-2141 104210-2840 17mm BORE, 53mm OD, 12mm DEEP 14x1.5 THREAD, 25mm BELT, 9mm TO FIRST GROOVE 7 GROOVE, CW, DECOUPLER, ZEN, ALTERNATE W055-107, W055-107B, W055-107N W055-100 DOUBLE V-BELT PULLEY W055-104 SERPENTINE PULLEY FERRARI JAGUAR MASERATI W055-107N DECOUPLER PULLEY LEXUS 13562 100211-6130 17mm BORE, 86mm OD, 49mm WIDE, 10mm DEEP, 15mm BELT, 13mm TO FIRST GROOVE 2 GROOVE 11512 13979 104210-2230 104210-3081 104210-3082 104210-3960 104210-4170 104210-5040 104210-5050 17mm BORE, 49mm OD, 32.5mm W, 11mm DEEP, 22mm BELT, 9.3mm TO FIRST GROOVE 24-82290-4 5503 6005 920726 920954 95.005.03 11136 11137 11196 11322 11323 11325 11326 11510 11514 11517 14072 104210-1091 104210-2050 104210-2070 104210-2080 104210-2090 104210-2100 104210-2140 104210-2141 104210-2840 17mm BORE, 53mm OD, 12mm DEEP, 14x1.5 THREAD, 25mm BELT, 9mm TO FIRST GROOVE 7 GROOVE, CW, DECOUPLER, LITENS, OEM, CAP W112-30N, ALTERNATE W055-107, W055-107A, W055-107B W055-101 SERPENTINE PULLEY CHRYSLER DODGE ISUZU W055-107 SERPENTINE CLUTCH PULLEY LEXUS W055-108 SERPENTINE CLUTCH PULLEY PONTIAC SCION 11040 13875 102211-1740 421000-0150 17mm BORE, 57mm OD, 33.7mm W, 10mm DEEP, 22mm BELT, 11mm TO FIRST GROOVE, NOT INTERCHANGEABLE WITH W055-97 24-82290-4 5503 920726 920954 11136 11137 11196 11322 11323 11325 11326 11510 11514 11517 14072 104210-1091 104210-2050 104210-2070 104210-2080 104210-2090 104210-2100 104210-2140 104210-2141 104210-2840 17mm BORE, 53mm OD, 41.4mm W, 12mm DEEP, 14x1.5 THREAD, 25mm BELT, 9mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH VERSION, ZEN, REPLACES THE DECOUPLER, USE, ALTERNATE W055-107A, W055-107B, W055-107N, 24-82291 24-82291-4 5502 920802 11195 11201 104210-4790 104210-4810 104210-4811 104210-4880 104210-4881 17mm BORE, 55mm OD, 41mm W, 12mm DEEP, 14x1.5 THREAD, 26mm BELT, 8.5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH VERSION, ZEN, TO REPLACE THE DECOUPLER, USE INSTALLATION TOOL W19-03, ALTERNATE W055-108N, W055-108A, Names and numbers are for reference purposes only 95

W055-108A DECOUPLER PULLEY PONTIAC SCION W055-111N DECOUPLER PULLEY CHEVROLET SATURN VOLVO W055-114 CLUTCH PULLEY 24-82291-4 6002 920802 11195 11201 104210-4790 104210-4810 104210-4811 104210-4880 104210-4881 17mm BORE, 55mm, 12mm DEEP, 14x1.5 THREAD, 26mm BELT, 8.5mm TO FIRST GROOVE 7 GROOVE, CW, DECOUPLER, ZEN, ALTERNATE W055-108, W055-108B, W055-108N 24-82320-4 5521 6008 920762 95.005.51 ZM-95.005.51 11109 104210-4140 104210-4410 17mm BORE, 58mm OD, 49.3mm W, 12mm DEEP, 22mm BELT, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CCW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-228N 24-82312 24-82312-3 5608 F-582200 F-582200.01 F-582200.02 11054 11093 104210-3560 104210-4050 104210-4051 104210-4640 17mm BORE, 56mm OD, 12mm DEEP, 14x1.5mm THREAD, 22mm BELT, 11mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH DESIGN, ZEN, USE W055-108N DECOUPLER PULLEY PONTIAC SCION 24-82291-4 5502 6002 920802 95.005.02 ZM-95.005.02 11195 11201 104210-4790 104210-4810 104210-4811 104210-4880 104210-4881 17mm BORE, 55mm OD, 50.2mm W, 12mm DEEP, 14x1.5 THREAD, 26mm BELT, 8.5mm TO FIRST 7 GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, ALTERNATE W055-108, W055-108A, W055-108B W055-112N DECOUPLER PULLEY BUICK CADILLAC CHEVROLET GMC SATURN 24-82302 6016 920893 95.005.10 ZM-95.005.10 11252 11367 11434 11508 11534 104210-2000 104210-2250 104210-6160 104210-6181 104210-6182 104210-6310 104210-6311 104210-6630 17mm BORE, 56mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N, ALTERNATE W055-112B W055-119A DECOUPLER PULLEY 6001 920833 11354 11596 104210-8230 104210-8590 15mm BORE, 53mm OD, 13mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE 7 GROOVE, CW, DECOUPLER, ZEN, ALTERNATE W055-119N W055-111B DECOUPLER PULLEY CHEVROLET SATURN W055-113N DECOUPLER PULLEY CHEVROLET W055-119N PULLEY 24-82320-4 920762 95.005.51 ZM-95.005.51 11109 104210-4140 104210-4410 24-82316-4 6018 920844 95.005.12 ZM-95.005.12 11237 104210-5380 24-82321-4 6001 920833 95.005.11 ZM-95.005.11 11354 11596 104210-8230 104210-8590 17mm BORE, 58mm OD, 48.7mm W, 12mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CCW, DECOUPLER, ZM, ALTERNATE W055-111N 96 17mm BORE, 62.5mm OD, 50.1mm W, 12mm DEEP, 14x1.5mm THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-227N, ALTERNATE W055-113B Names and numbers are for reference purposes only 15mm BORE, 53mm OD, 13mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE 7 GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-227N, ALTERNATE W055-119A

W055-122 SERPENTINE CLUTCH PULLEY DODGE RAM W055-126 POONG SUNG CLUTCH PULLEY HYUNDAI KIA W055-129N DECOUPLER PULLEY PONTIAC SCION 24-82116 5570 11378 11379 11755 421000-0512 421000-7001 421000-7140 421000-7160 17mm BORE, 60mm OD, 12mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE 8 GROOVE, CW, CLUTCH VERSION, ZEN, USE 5572 11192 11353 02131-9280 02131-9320 02131-9321 104210-6191 17mm BORE, 52mm OD, 36mm W, 12mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CLUTCH DESIGN, ZEN, USE 6019 920906 ZM-95.005.06 11385 11386 11402 11776 11777 11778 14486 14487 104210-2270 104210-2340 104210-5480 104210-5481 104210-5490 104210-5491 104211-3290 104211-3301 104211-3311 17mm BORE, 55mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N, ALTERNATE W055-129B W055-124 CLUTCH PULLEY 5509 F-567525 23317 102211-2310 102211-2810 104210-8020 15mm BORE, 58mm OD, 40mm W, 10mm DEEP, 14x1.5 THREAD, 8.5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 W055-127N DECOUPLER PULLEY CHRYSLER DODGE JEEP 24-82322-4 6022 920971 95.005.13 ZM-95.005.13 11570 11572 11576 12886 421000-0750 421000-0770 421000-0820 421000-7030 17mm BORE, 52mm OD, 40.6mm W, 12mm DEEP, 14x1.5 THREAD, 22mm BELT, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N W055-130N DECOUPLER PULLEY 6020 920907 11400 11403 11404 11407 11408 104210-2350 104210-2360 104210-2550 104210-2570 104210-2610 17mm BORE, 58mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N JEEP W055-125N DECOUPLER PULLEY W055-128N DECOUPLER PULLEY W055-131N DECOUPLER PULLEY ACURA HONDA 24-82294-4 6013 920720 95.005.08 ZM-95.005.08 11114 13960 13961 104210-4240 104210-4241 121000-3850 121000-3851 121000-4520 17mm BORE, 58mm OD,12mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-228N, ALTERNATE W055-125B 24-822101-4 6017 920905 95.005.05 ZM-95.005.05 11516 11519 104210-2630 104210-2650 17mm BORE, 55mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE 4 GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N, ALTERNATE W055-128B 24-82324-4 6021 920993 95.005.15 ZM-95.005.15 11573 11600 11672 11773 11774 104210-1240 104210-1600 104210-1890 104210-1990 104211-8510 17mm BORE, 65mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 10mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N Names and numbers are for reference purposes only 97

W055-132N DECOUPLER PULLEY CHRYSLER DODGE JEEP W055-139N DECOUPLER PULLEY W055-144N DECOUPLER PULLEY CADILLAC CHEVROLET GMC 24-82325-4 6023 920972 95.005.14 ZM-95.005.14 11592 11598 11749 11792 12887 421000-7040 421000-7050 421000-7090 421000-7120 421000-7150 17mm BORE, 52mm OD, 45.3mm W, 11mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, INSTALLATION TOOL W19-08, CAP W112-30N 920029 12884 104210-6540 17mm BORE, 52mm OD, 47.1mm W, 10mm DEEP, 14x1.5 THREAD, 9.3mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N 920030 14007 104211-8340 17mm BORE, 59mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, INSTALLATION TOOL W19-08, CAP W112-30N W055-137N DECOUPLER PULLEY LINCOLN 24-82326-4 920027 95.005.04 ZM-95.005.04 11664 11665 104210-6561 104210-6571 17mm BORE, 59mm OD, 47mm W, 11mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE 4 GROOVE, CW, DECOUPLER, LITENS, OEM, CAP W112-30N, W19-08 TOOL W055-14 V-BELT PULLEY BOBCAT CHEVROLET DAIHATSU GEO ISHIKAWAJIMA ISUZU 24-82110 12337 12652 14684 14937 100211-1411 100211-4070 100211-4150 100211-4500 100211-4710 100211-4780 100211-6830 101211-1100 101211-1390 15mm BORE, 69mm OD, 21.3mm W, 4mm DEEP, 9.5mm BELT, 11mm TO FIRST GROOVE 1 GROOVE W055-145N DECOUPLER PULLEY CADILLAC CHEVROLET GMC 24-82331-4 920031 14009 104210-6870 17mm BORE, 59mm OD, 45.5mm W, 11mm DEEP, 22mm BELT, 9.1mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, INSTALATION TOOL W19-08, CAP W112-30N W055-138N DECOUPLER PULLEY 920028 11636 104210-2330 W055-143N DECOUPLER PULLEY CADILLAC CHEVROLET GMC SAAB 920040 11499 11647 104210-2170 104211-8160 104211-8161 ACURA 920037 W055-146N DECOUPLER PULLEY 104211-3470 HONDA 17mm BORE, 52mm OD, 41mm W, 11mm DEEP. 14x15 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N 98 17mm BORE, 57mm OD, 41mm W, 10mm DEEP, 14x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS OEM, 17mm HEX, USE INSTALLATION TOOL W19-08, CAP W112-30N, NOTICE W055-112N, -130N Names and numbers are for reference purposes only 17mm BORE, 58mm OD, 41mm W, 14x1.5 THREAD 7 GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N

BMW W055-148N CLUTCH PULLEY W055-20 DOUBLE V-BELT PULLEY CHRYSLER DODGE PLYMOUTH W055-26 SERPENTINE PULLEY ACURA CHRYSLER DODGE HONDA PLYMOUTH F-580452 14203 14204 104210-6393 104210-6403 17mm BORE, 49mm OD, 38mm W, 11mm DEEP, 14x1.5 THREAD, OEM 24-82108 13185 13256 13301 13312 13313 13353 121000-3100 121000-3200 121000-3330 121000-3360 121000-3370 121000-3410 121000-4030 121000-4040 121000-4100 17mm BORE, 74mm OD, 34.4mm W, 11.5mm DEEP, 9.5mm BELT, 11.5mm TO FIRST GROOVE 2 GROOVE, WITH SPACER ATTACHED 24-82259 13308 13323 13325 13386 13387 13388 13507 13675 13684 13685 13714 13737 100211-6150 100211-6170 100211-6190 100211-8030 100211-8150 100211-8190 100211-8710 101211-7220 101211-7230 17mm BORE, 65mm OD, 28.5mm W, 11.5mm DEEP, 18mm BELT, 9.7mm TO FIRST GROOVE 5 GROOVE W055-16 SERPENTINE PULLEY SUZUKI 24-82256 13411 13455 13456 13500 13670 13671 13679 13753 14449 14472 22410 100211-1341 100211-3120 100211-3500 100211-3610 100211-3760 100211-3820 100211-3961 100211-3970 100211-7430 15mm BORE, 57mm OD, 26.6mm W, 11.5mm DEEP, 15mm BELT, 9.5mm TO FIRST GROOVE 4 GROOVE, SIMILAR TO A W055-43 W055-21 SERPENTINE PULLEY CHRYSLER DODGE 24-82261 13302 13304 121000-4080 121000-4090 121000-4110 17mm BORE, 64mm OD, 37.8mm W, 10mm DEEP, 29mm BELT, 8.2mm TO FIRST GROOVE 8 GROOVE, AS OF 7/22/10 THESE ARE BLACK ANODIZED W055-27 SERPENTINE PULLEY ACURA CHRYSLER DODGE HONDA ISUZU JEEP 24-82260 11030 11039 11062 11099 11150 11151 11240 11276 13103 13306 13307 13311 101211-5490 101211-5500 101211-5620 101211-7170 101211-7520 101211-7670 101211-7750 101211-7840 101211-7850 17mm BORE, 65mm OD, 31.1mm W, 10mm DEEP, 22mm BELT, 8mm TO FIRST GROOVE, SIMILAR TO W055-64 AND W055-77 W055-19 SERPENTINE PULLEY HONDA W055-23 SERPENTINE PULLEY W055-28 DOUBLE V-BELT PULLEY 24-82257 14855 100211-2150 15mm BORE, 64mm OD, 28.4mm W, 11mm DEEP, 18mm BELT, 9.3mm TO FIRST GROOVE 5 GROOVE, USED WITH SMALL BEARING W02X-21. FOR LARGE BEARING USE W055-40. 24-82268 14347 14644 14672 021000-8260 021000-8290 100211-0700 100211-0750 100211-0782 17mm BORE, 61mm OD, 19.5mm W, 14.5mm DEEP, 12mm BELT, 7.3mm TO FIRST GROOVE 3 GROOVE 24-82111 13168 13169 14337 14573 14574 021000-6190 021000-6520 021000-6750 100211-0040 100211-0090 100211-0100 100211-0240 100211-0300 100211-0540 17mm BORE, 68.5mm OD, 35mm W, 15mm DEEP, 10mm BELT, 13mm TO FIRST GROOVE 2 GROOVE Names and numbers are for reference purposes only 99

W055-29 SERPENTINE PULLEY HONDA GEO W055-34 SERPENTINE PULLEY SUZUKI W055-40 SERPENTINE PULLEY HONDA 24-82257 14593 021000-9770 17mm BORE, 71mm OD, 19mm W, 14mm DEEP, 13mm BELT, 7mm TO FIRST GROOVE 3 GROOVE 13214 13316 100211-6600 100211-6720 101211-3750 15mm BORE, 54mm OD, 20.5mm W, 10mm DEEP, 13mm BELT, 7.2mm TO FIRST GROOVE 3 GROOVE, SIMILAR TO W055-08 13229 13294 14680 14855 100211-2011 100211-2140 100211-2151 100211-3300 100211-3310 100211-7800 100211-7810 15mm BORE, 66mm OD, 28mm W, 12mm DEEP, 20mm BELT, 9mm TO FIRST GROOVE. 5 GROOVE, USED WITH LARGE BEARING W02X-19. FOR SMALL BEARING USE W055-19. ISUZU W055-30 V-BELT PULLEY W055-38 SERPENTINE PULLEY CADILLAC CHRYSLER DODGE EAGLE JEEP LEXUS W055-43 SERPENTINE PULLEY ACURA DAIHATSU HONDA 24-82263 24-82106 24-82256 13398 13409 13492 14668 14857 100211-2001 100211-2031 100211-2102 100211-3160 100211-3550 100211-7570 100211-9840 101211-0192 101211-0200 15mm BORE, 67mm OD, 19mm W, 9.5mm BELT 1 GROOVE FOR LARGE BEARING W02X-19 OR W02X- 38. FOR SMALL BEARING W02X-21 USE PULLEY W055-00. 11032 11033 11087 11240 13341 13442 13443 13444 13545 13546 13552 13578 100211-8450 100211-8840 101211-5450 101211-5560 101211-5610 101211-7301 101211-7450 101211-7861 101211-9150 17mm BORE, 57mm OD, 31mm W, 10mm DEEP, 22mm BELT, 8mm TO FIRST GROOVE 13241 13339 13392 13433 13456 13486 13496 13509 13536 13659 13711 100211-3430 100211-7180 100211-7970 100211-8910 100211-9710 100211-9770 101211-0130 101211-0250 101211-0340 15mm BORE, 60mm OD, 24.9mm W, 10.5mm DEEP, 15mm BELT, 9mm TO FIRST GROOVE. 4 GROOVE, SIMILAR TO W055-16 W055-31 SERPENTINE PULLEY GEO ISUZU SUZUKI 24-82265 W055-38A SERPENTINE PULLEY W055-51 SERPENTINE PULLEY CHRYSLER DODGE JEEP SCION 24-82269 13234 13240 13319 13338 13397 13482 13499 13503 13512 13680 14453 14611 100211-1001 100211-1041 100211-1061 100211-1201 100211-1321 100211-2021 100211-2071 100211-2170 100211-2280 15mm BORE, 55mm OD, 27.8mm W, 11mm DEEP, 18mm BELT, 8.7mm TO FIRST GROOVE. 5 GROOVE FOR LARGE BEARING W02X-19 AND W02X- 38. FOR SMALL BEARING W02X-21 USE PULLEY W055-02. 17mm BORE, 57mm OD, 31mm W, 10mm DEEP, 22mm BELT, 8mm TO FIRST GROOVE, ALTERNATE W055-38 11034 11088 11298 13354 13566 13742 13823 13824 13861 13910 13911 13914 100211-6370 101211-7400 102211-0750 102211-2480 104210-3780 104210-3880 104210-3890 104210-9060 121000-3530 17mm BORE, 57.5mm OD, 35.6mm W, 10mm DEEP, 26mm BELT, 8mm TO FIRST GROOVE 7 GROOVE, SIMILAR TO W055-74 100 Names and numbers are for reference purposes only

W055-52 SERPENTINE PULLEY HONDA 13743 101211-9810 17mm BORE, 65mm OD, 24.7mm W, 11mm DEEP, 15mm BELT, 9.3mm TO FIRST GROOVE. 4 GROOVE, SIMILAR TO W055-06 W055-63 SERPENTINE PULLEY DODGE 24-82270 13302 13766 13874 121000-4150 121000-4280 121000-4481 17mm BORE, 60mm OD, 38mm W, 11mm DEEP, 30mm BELT, 8mm TO FIRST GROOVE 8 GROOVE W055-71 SERPENTINE PULLEY ACURA CHEVROLET GEO ISUZU 24-82264 13391 13521 13569 13739 14732 14739 100211-1331 100211-2221 100211-2360 100211-3720 100211-7951 100211-9731 101211-0160 101211-4220 15mm BORE, 50mm OD, 27mm W, 12.5mm DEEP, 15mm BELT, 10.8mm TO FIRST GROOVE 4 GROOVE DAIHATSU W055-53 SERPENTINE PULLEY 13385 13393 13454 13501 13502 13525 13794 21472 100211-6110 100211-6360 100211-8380 100211-8850 100211-8870 101211-5460 101211-7060 101211-7160 101211-9590 17mm BORE, 55mm OD, 25mm W, 10.5mm DEEP, 15mm BELT, 9.2mm TO FIRST GROOVE 4 GROOVE W055-64 SERPENTINE PULLEY HONDA ISUZU 24-82296 13776 102211-1020 17mm BORE, 65mm OD, 33mm W, 22mm BELT, 9.5mm TO FIRST GROOVE, ***NLA WHEN STOCK DEPLETED*** W055-72 SERPENTINE PULLEY GEO JAGUAR MAZDA 24-82271 13234 13252 13278 13321 13407 13440 13498 13524 13551 13556 13557 13688 100211-6310 100211-6450 100211-8050 100211-8070 100211-8230 100211-8320 100211-8480 100211-8560 100211-8590 17mm BORE, 55mm OD, 29mm W, 10.5mm DEEP, 18mm BELT, 9mm TO FIRST GROOVE 5 GROOVE W055-54 SERPENTINE PULLEY DAIHATSU SUZUKI W055-70 SERPENTINE PULLEY DODGE JEEP W055-73 SERPENTINE CLUTCH PULLEY VOLVO 13795 13857 13982 22602 101211-5280 101211-5340 102211-1430 102211-1960 102211-2400 102211-2430 17mm BORE, 60mm OD, 24.3mm W, 10.5mm DEEP, 15mm BELT, 8.7mm TO FIRST GROOVE 4 GROOVE 24-82267 13353 13354 13453 121000-3460 121000-3470 121000-4130 17mm BORE, 65mm OD, 35.8mm W, 10.5mm DEEP, 25mm BELT, 8mm TO FIRST GROOVE 7 GROOVE 24-82275 24-82275-3 535002410 5516 F-231108 F-231108.02 13845 102211-0500 17mm BORE, 56mm OD, 42.3mm W, 11mm DEEP, 22mm BELT CCW 14x1.5mm THREAD, 15mm TO FIRST CCW, CLUTCH PULLEY, ZEN, USE, ALTERNATE W055-73N Names and numbers are for reference purposes only 101

W055-73N SERPENTINE CLUTCH PULLEY VOLVO W055-76 SERPENTINE PULLEY JAGUAR W055-79 SERPENTINE PULLEY 24-82275 24-82275-3 535002410 5516 F-231108 F-231108.02 13845 102211-0500 17mm BORE, 56mm OD, 41.5mm W, 11mm DEEP, 22mm BELT, CCW 14x1.5 THREAD, 15mm TO FIRST GROOVE CCW, CLUTCH PULLEY, INA, OEM, USE, ALTERNATE W055-73 13925 102211-0860 17mm BORE, 55mm OD, 38.4mm W, 10.5mm DEEP, 22mm BELT, 15.8mm TO FIRST GROOVE 11138 11139 11324 13957 13984 102211-2120 104210-3470 104210-3471 104210-4200 104210-4230 104210-4920 104210-4921 17mm BORE, 55mm OD, 35.5mm W, 11mm DEEP, 26mm BELT, 9mm TO FIRST GROOVE 7 GROOVE ACURA W055-74 SERPENTINE PULLEY 11154 13980 HONDA 104210-3290 104210-3291 104210-3292 104210-3293 104210-4730 104210-4731 104210-4732 104210-5160 17mm BORE, 60mm OD, 35mm W, 10.5mm DEEP, 26mm BELT, 9.5mm TO FIRST GROOVE 7 GROOVE, SIMILAR TO W055-51 W055-77 SERPENTINE PULLEY FERRARI LEXUS 11293 11531 13331 13384 13389 13410 13547 13553 13668 13791 100211-6060 100211-6300 100211-6350 100211-6390 100211-6410 100211-6440 100211-8300 101211-7020 101211-7180 17mm BORE, 60mm OD, 31.6mm W, 11.5mm DEEP, 22mm BELT, 8.5mm TO FIRST GROOVE W055-82 SERPENTINE PULLEY GEO ISUZU JEEP LEXUS 24-82277 13276 13413 13424 13732 13876 13906 13956 100211-8392 100211-8530 100211-8860 100211-9880 101211-5710 101211-7440 121000-3780 121000-3821 17mm BORE, 55mm OD, 30.5mm W, 10.5mm DEEP, 22mm BELT, 8.2mm TO FIRST GROOVE ACURA W055-75 SERPENTINE PULLEY W055-78 SERPENTINE PULLEY JAGUAR W055-83 SERPENTINE PULLEY CHRYSLER DODGE HYUNDAI JEEP KIA 13965 102211-2680 17mm BORE, 62.5mm OD, 36mm W, 10mm DEEP, 26mm BELT, 9mm TO FIRST GROOVE 7 GROOVE 13758 101211-7630 101211-7633 17mm BORE, 48mm OD, 36.6mm W, 10.5mm DEEP, 26mm BELT, 9.3mm TO FIRST GROOVE 7 GROOVE 11033 11048 11112 11113 11155 11204 11241 11243 11285 11286 11292 11294 100211-8830 102211-0760 102211-1920 102211-1990 102211-2000 102211-2610 104210-3042 104210-3120 104210-3790 17mm BORE, 55mm OD, 31.8mm W, 11mm DEEP, 22mm BELT, 8.8mm TO FIRST GROOVE 102 Names and numbers are for reference purposes only

W055-85 SERPENTINE CLUTCH PULLEY CHRYSLER DODGE JEEP 2.05.0428.0 24-82273 5428 920834 11063 11386 11577 13870 13871 13961 104210-1461 104210-2801 121000-4520 421000-0011 421000-0012 421000-0013 421000-0021 421000-0022 421000-0023 17mm BORE, 57.5mm OD, 39.9mm W, 12mm DEEP, 14x1.5 THREAD, 22mm BELT, 9mm TO FIRST GROOVE, CW, CLUTCH VERSION, ZEN, USE, ALTERNATE W055-85A, W055-85B, W055-85N, W055-112N W055-85N DECOUPLER PULLEY CHRYSLER DODGE 24-82289-4 6006 920538 920685 920834 95.005.01 11063 11386 11577 13870 13871 104210-1461 104210-2801 421000-0011 421000-0012 421000-0013 421000-0021 421000-0022 421000-0023 421000-0024 17mm BORE, 55mm OD, 43mm W, 10mm DEEP, 14x1.5 THREAD, 22mm BELT, 9.3mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-227N, ALTERNATE W055-85, W055-85A, W055-112N W055-95 SERPENTINE PULLEY ACURA BUICK CADILLAC CHEVROLET HONDA LEXUS 24-82278 11035 11036 11178 11179 11180 11181 11183 13103 13506 13722 13791 13919 100211-8740 101211-9760 102211-0730 102211-1331 104210-3060 104210-3300 104210-3310 104210-4220 104210-4360 17mm BORE, 62mm OD, 32.5mm W, 11mm DEEP, 22mm BELT, 9mm TO FIRST GROOVE W055-85A DECOUPLER PULLEY CHRYSLER DODGE 24-82289-4 6006 920538 920685 920834 11063 11386 11577 13870 13871 104210-1461 104210-2801 421000-0011 421000-0012 421000-0013 421000-0021 421000-0022 421000-0023 421000-0024 17mm BORE, 55mm ID, 10mm DEEP, 14x1.5 THREAD, 22mm BELT, 9.3mm TO FIRST GROOVE, CW, DECOUPLER, ZEN, ALTERNATE W055-85, W055-85B, W055-85N, W055-112N W055-88 SERPENTINE CLUTCH PULLEY JAGUAR 24-82276 5573 F-230051 F-230051.03 11092 13926 102211-0512 102211-0870 17mm BORE, 56mm OD, 41mm W, 11mm DEEP, 14x1.5 THREAD, 22mm BELT, 16mm TO FIRST GROOVE, CW, CLUTCH PULLEY, ZEN, USE W055-96 SERPENTINE PULLEY CADILLAC CHEVROLET PONTIAC SATURN 11003 11044 11046 11090 11146 11156 11369 11476 104210-2160 104210-3191 104210-3280 104210-3320 104210-3390 104210-4990 104210-5070 104210-5390 104210-5420 17mm BORE, 58mm OD, 32.5mm W, 11mm DEEP, 22mm BELT, 9.3mm TO FIRST GROOVE W055-85B DECOUPLER PULLEY CHRYSLER DODGE 24-82289-4 920538 920685 920834 95.005.01 ZM-95.005.01 11063 11386 11577 13870 13871 104210-1461 104210-2801 421000-0011 421000-0012 421000-0013 421000-0021 421000-0022 421000-0023 421000-0024 17mm BORE, 55mm OD, 48.7mm W, 10mm DEEP, 14x1.5 THREAD, 22mm BELT, 9.1mm TO FIRST, CW, DECOUPLER, ZM, ALTERNATE W055-85, W055-85A, W055-85N, W055-112N W055-88N SERPENTINE CLUTCH PULLEY JAGUAR 24-82276 24-82276-3 5573 F-230051 F-230051.03 11092 13926 102211-0512 102211-0870 17mm BORE, 59mm OD, 41mm W, 11mm DEEP, 14x1.5 THREAD, 22mm BELT, 16mm TO FIRST GROOVE, CW, CLUTCH PULLEY, INA, OEM, USE W055-97 SERPENTINE PULLEY CHRYSLER DODGE JEEP MOTOR 24-82272 11094 11116 11242 13790 13873 13873C 121000-4250 121000-4251 121000-4400 121000-4440 121000-4530 121000-4540 121000-4590 121000-4620 121000-4630 17mm BORE, 57mm OD, 33mm W, 13mm DEEP, 22mm BELT, 10mm TO FIRST GROOVE, NOT INTERCHANGEABLE WITH W055-101 Names and numbers are for reference purposes only 103

W055-98 SERPENTINE PULLEY W050-29 SERPENTINE CLUTCH PULLEY AUDI W052-01N SERPENTINE PULLEY 11152 13858 102211-5130 104210-8010 15mm BORE, 52mm OD, 36mm W, 10mm DEEP, 22mm BELT, 12.5mm TO FIRST GROOVE 24-91256 5380 F-225635.6 F-225635.7 F-225653.11 11207 11208 11209 11210 11212 23320 23323 0-124-315-011 0-124-325-018 0-124-515-026 0-124-515-083 0-124-525-010 0-124-525-089 0-124-615-021 SG12B010 SG12B012 17mm BORE, 56mm OD, 36mm W, 11mm DEEP, 16x1.5 THREAD, 18mm BELT, 5.5mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 11018 13940 TG12C035 TG15C026 TG15C026C TG15C180 17mm BORE, 63mm OD, 30.5mm W, 14mm DEEP, 22mm BELT, 8.3mm TO FIRST GROOVE W055-99 SERPENTINE PULLEY CHEVROLET PONTIAC 11110 11140 104210-4330 104210-4420 17mm BORE, 55mm OD, 29mm W, 11mm DEEP, 18mm BELT, 9.2mm TO FIRST GROOVE 5 GROOVE DELCO W050-29N SERPENTINE CLUTCH PULLEY AUDI 24-91256 24-91256-3 5380 F-225635.6 F-225635.7 F-225653.11 11207 11208 11209 11210 11212 23320 23323 0-124-315-011 0-124-325-018 0-124-515-026 0-124-515-083 0-124-525-010 0-124-525-089 0-124-615-021 SG12B010 SG12B012 17mm BORE, 56mm OD, 35mm W, 11mm DEEP, 16x1.5 THREAD, 18mm BELT, 5mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, INA, OEM, USE W052-02N SERPENTINE PULLEY AUDI JOHN DEERE SEAT SKODA 12445 13850 13852 13946 21485 22911 22995 22997 23357 0-124-315-003 0-124-315-030 0-124-315-042 0-124-325-003 A13Vi181 SG8B011 SG8B015 SG8B016 SG8B029 17mm BORE, 56mm OD, 37.5mm W, 9mm DEEP, 22mm BELT, 15mm TO FIRST GROOVE, M16 NUT D05-11 DELCO PULLEY-10SI SINGLE ALFA ROMEO ALLIS-CHALMERS AMC AUSTIN WESTERN BAKER BUICK 24-1103 24-1103-2 14327 14329 14331 14395 14582 14610 14894 14896 14921 14955 14984 20593 10479838 10480089 10480092 1100109 1100110 1100111 1100113 1100115 1100119 17mm BORE, 66mm OD, 18mm W, 4mm DEEP, 10mm BELT, 8.7mm TO FIRST GROOVE 1 GROOVE, COMMON 10, 12, 15, 17, 27Si SERIES, UNIVERSAL 104 W052-00N SERPENTINE PULLEY BUICK CADILLAC CHEVROLET GMC OLDSMOBILE 11017 11453 13805 13865 13866 13938 13943 13993 FG12S020 FG12S028 FG15S019 FG15S033 FG15S051 FG15S084 FG15S097 FG15S098 FGN12S103 17mm BORE, 57mm OD, 31mm W, 15mm DEEP, 22mm BELT, 0.6/8.6mm TO FIRST GROOVE, NEW UPDATED VERSION HAS A SEPARATE SPACER Names and numbers are for reference purposes only W052-03 SERPENTINE CLUTCH PULLEY AUDI LINDE MERCEDES SEAT SKODA 24-91255 5378 F-227628.4 F-227628.5 F-227628.6 F-227628.7 11019 11134 11149 11221 11257 11360 11563 13849 13851 13853 13942 13947 0-121-715-003 0-124-315-001 0-124-315-032 0-124-325-001 0-124-325-131 0-124-515-010 0-124-525-050 0-124-525-066 0-124-525-091 17mm BORE, 56mm OD, 42.5mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 15mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, ALTERNATE W052-03N. WITHOUT SPACER

W052-03N SERPENTINE CLUTCH PULLEY AUDI DODGE LINDE MERCEDES SEAT SKODA W052-06N SERPENTINE PULLEY CHEVROLET GMC ISUZU HYUNDAI W052-09N SERPENTINE PULLEY KIA 24-91255-3 5378 F-227628.4 F-227628.5 F-227628.6 F-227628.7 11019 11134 11149 11221 11257 11360 11563 13849 13851 13853 13942 13947 0-121-715-003 0-121-715-047 0-121-715-071 0-124-315-001 0-124-315-013 0-124-315-032 0-124-325-001 0-124-325-012 0-124-325-131 17mm BORE, 56mm OD, 41mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 14.5mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, 3.7mm SPACER INCLUDED, USE, OEM. NOT INTERCHANGEABLE WITH W052-10N 11047 SG10S039 SG10S049 SG10S051 17mm BORE, 67mm OD, 31.3mm W, 14mm DEEP, 22mm BELT, 8.5mm TO FIRST GROOVE WITH THE SPACER, WITH SPACER 11020 13209 2607372 A0002655516 17mm BORE, 58mm OD, 26.7mm W, 14mm DEEP, 22mm BELT, 9mm TO FIRST GROOVE, 58mm OD, UPDATES 65mm AND 62mm OD, FOR ALL YEARS, CHANGE BELT TO HYUNDAI# 25212-37181, MEASUREMENTS TAKEN WITH SPACER W052-04N SERPENTINE DECOUPLER PULLEY CHEVROLET 24-94277-4 6026 920667 95.012.01 ZM-95.012.01 13864 13969 A14Vi39 TG15C013 TG15C051 TG15S010 17mm BORE, 66mm OD, 52mm W, 13.5mm DEEP, 16x1.5 THREAD, 22mm BELT, 7.1mm TO FIRST, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-228N, ALTERNATE W052-04B W052-07N SERPENTINE PULLEY CHEVROLET GM OLDSMOBILE PONTIAC SATURN 11072 11144 11259 11264 11265 11266 11313 11356 11357 11468 13804 13944 FG12S010 FG12S011 FG12S018 FG12S019 FG12S023 FG12S024 FG12S025 FG12S026 FG12S033 17mm BORE, 56mm OD, 27.4mm W, 15mm DEEP, 18mm BELT, 8.5mm TO FIRST GROOVE 5 GROOVE, OEM, ALTERNATE W052-43N W052-10 SERPENTINE CLUTCH PULLEY AUDI 24-91274 24-91274-3 24-94282 5448 F-231142.08 F-231142.1 11064 11070 11723 23115 23116 23255 23256 0-124-515-059 0-124-525-009 0-124-525-088 0-124-615-009 F-000-BL0-809 SG12B075 SG14B016 SG14B022 TG14C025 17mm BORE, 56mm OD, 39.5mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 12.3mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03, NOT INTERCHANGEABLE WITH W052-03 W052-05N SERPENTINE PULLEY CHEVROLET W052-08N SERPENTINE PULLEY W052-10N SERPENTINE CLUTCH PULLEY AUDI 13721 13968 A14Vi21 TG15C014 TG15C052 TG15S011 17mm BORE, 67mm OD, 29.5mm W, 13.5mm DEEP, 22mm BELT, 7.1mm TO FIRST GROOVE SG7S022 17mm BORE, 48mm OD, 28.5mm W, 13mm DEEP, 22mm BELT, 6mm TO FIRST GROOVE, WITH NUT 24-91274-3 24-94282 5448 F-231142.08 F-231142.1 F-581445 11064 11070 11723 11810 23115 23116 23255 23256 0-124-515-059 0-124-525-009 0-124-525-088 0-124-615-009 F-000-BL0-809 SG12B075 SG14B016 SG14B022 TG14C025 17mm BORE, 56mm OD, 35.8mm W, 11mm DEEP, 16x1.5 THREAD, 22mm BELT, 13mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE, NOT INTERCHANGEABLE WITH W052-03N Names and numbers are for reference purposes only 105

W052-11N SERPENTINE CLUTCH PULLEY CHRYSLER DODGE FREIGHTLINER JEEP MERCEDES MERCEDES HD 24-91318-3 5581 F-239808 F-239808.02 F-239808.03 F-239808.04 11306 11457 20122 FG18S056 FG23S012 TG17C026 TG17C028 TG17C030 TG17C030b TG17C046 TG23C019 17mm BORE, 50mm OD, 49mm W, 14.5mm DEEP, 16x1.5 THREAD, 26mm BELT, 19.5mm TO FIRST 7 GROOVE, CW, CLUTCH, INA, OEM, USE W052-13N SERPENTINE CLUTCH PULLEY BUICK F-239807 11022 TG13S011 TG13S019 TG13S027 17mm BORE, 56mm OD, 38mm W, 13mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.5mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, ***NLA*** USE, ALTERNATE W052-30N W052-16N SERPENTINE CLUTCH PULLEY MERCEDES F-557311 11066 23285 SG12B062 TG12C026 TG15C075 17mm BORE, 56mm OD, 14mm DEEP, 16x1.5 THREAD, 25mm BELT, 19.5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, INA, OEM, USE, THIS CAN BE USED WITH A WITH THE BEARING SPACER W052-12 SERPENTINE CLUTCH PULLEY W052-14N SERPENTINE DECOUPLER PULLEY CHEVROLET W052-17N SERPENTINE DECOUPLER PULLEY PONTIAC SATURN 5569 F-554755.01 11258 11458 11567 13939 TG11S092 TG11S102 TG11S110 TG12C032 TG12C034 TG12C116 TG12S041 TG12S217 17mm BORE, 53mm OD, 36.7mm W, 17mm DEEP, 16x1.5 THREAD, 22mm BELT, 8.2mm TO FIRST, CW, CLUTCH, ZEN, USE INSTALLATION TOOL W19-03 24-94286-4 6027 920746 95.012.05 ZM-95.012.05 11487 13969A FG15S061 FG15S083 TG15C046 TG15C089 TG15C107 TG15C139 17mm BORE, 61mm OD, 44mm W, 15mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.7mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE, CAP W115-228N 24-94288-4 6030 920843 95.012.08 ZM-95.012.08 11263 TG15C114 17mm BORE, 57mm OD, 50mm W, 15mm DEEP, 16x1.5 THREAD, 20mm BELT, 9mm TO FIRST GROOVE 5 GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W115-227N TG15C159 W052-12N SERPENTINE CULTCH PULLEY W052-15N SERPENTINE DECOUPLER PULLEY PONTIAC W052-18N SERPENTINE CLUTCH PULLEY HYUNDAI KIA 5569 F-554755.01 11258 11458 11567 13939 TG11S092 TG11S102 TG11S110 TG12C032 TG12C034 TG12C116 TG12S041 TG12S217 17mm BORE, 53mm OD, 36.7mm W, 17mm DEEP, 16x1.5 THREAD, 22mm BELT, 8.2mm TO FIRST, CW, CLUTCH, INA, OEM, USE, CAP W112-31N 24-94287-4 6029 920818 95.012.07 ZM-95.012.07 11143 TG12C040 TG12C043 TG13S023 TG13S028 17mm BORE, 57mm OD, 50mm W, 15mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.5mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, USE, CAP W115-227N 535-0135-10 F-240026.01 F-240026.02 F-240026.03 F-240026.04 F-240026.05 11189 11491 11492 11607 2606446 FG15S053 TG11C076 TG11C087 17mm BORE, 60mm OD, 33mm W, 14mm DEEP, 22mm BELT, 16x1.5mm THREAD, 9mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, CAP W112-31N USE 106 Names and numbers are for reference purposes only

W052-19N SERPENTINE CLUTCH PULLEY BMW W052-22N SERPENTINE PULLEY CHEVROLET W052-25N SERPENTINE CLUTCH PULLEY HYUNDAI KIA 24-91306-3 5410 F-230329.02 F-230329.2 F-230329.4 11260 TG17C015 24-94289-4 920931 95.012.04 ZM-95.012.04 11487 FG15S027 535 0217 10 F-567535 F-567535.01 F-567535.03 11493 11702 11710 14006 2612531 FG15S110 TG11C088 TG11C089 17mm BORE, 50mm OD, 37.5mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 12mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE 17mm BORE, 65mm OD, 39.5mm W, 15mm DEEP, 16x1.5 THREAD, 9.7mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE, CAP W112-30N 17mm BORE, 55mm OD, 33mm W, 14mm DEEP, 22mm BELT, 16x1.5mm THREAD, 9mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE W052-20N ALTERNATOR FAN AKERMAK ALFA ROMEO ATLAS COPCO AUDI BAUDOIN MARINE BMW MARINE 12049 12100 12101 12102 12110 12120 12305 12411 12412 12415 12418 12419 2541423 2940753 2940754 2940780 2940793 9AR5031P A12R30 A12R31 A12R32 17mm BORE, 135mm OD PARIS RHONE AND APPLICATIONS W052-23N SERPENTINE PULLEY BUICK CADILLAC CHEVROLET GMC ISUZU PONTIAC 11021 11023 11069 11141 11145 11327 11601 13860 TG10S017 TG10S020 TG10S022 TG11S050 TG11S053 TG12C044 TG12C045 TG12C050 TG12C085 17mm BORE, 56mm OD, 32mm W, 4.3mm DEEP, 0mm TO FIRST GROOVE W052-26N SERPENTINE DECOUPLER PULLEY 24-94293-4 920020 95.012.10 ZM-95.012.10 11618 FG12S027 FG15S046 FG15S109 17mm BORE, 52mm OD, 36mm W, 15mm DEEP, 10mm TO FIRST GROOVE, DECOUPLER, LITENS, OEM, 17mm HEX, USE TOOL W19-08, CAP W112-30N W052-21N SERPENTINE CLUTCH PULLEY CITROEN FIAT LANCIA MAZDA PEUGEOT 24-94261 24-94261-3 5453 F-236591.05 F-236591.1 F-236591.4 20256 23301 24052 24053 24078 24079 24080 FG18S017 FG18S027 FG18S048 SG10B048 TG10B013 TG10B024 TG12C038 TG15C020 TG15C028 17mm BORE, 54mm OD, 38mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 12.5mm TO FIRST GROOVE, CW, CLUTCH, INA, USE INSTALLATION TOOL W19-03 W052-24N SERPENTINE PULLEY CHEVROLET GMC HUMMER ISUZU 11147 11148 11465 11486 13968 FG15S023 FG15S068 FG15S082 TG12S028 TG12S047 TG12S089 TG13S013 TG13S024 TG15C047 17mm BORE, 61mm OD,30mm W, 6mm TO FIRST GROOVE W052-27N SERPENTINE PULLEY INFINITI SUZUKI 11256 TG15C113 TG15S147 TG15S179 TG15S192 17mm BORE, 60mm OD, 30mm W, 1.5mm TO FIRST GROOVE 7 GROOVE Names and numbers are for reference purposes only 107

W052-28N SERPENTINE DECOUPLER PULLEY BUICK CHEVROLET GM GMC SAAB HYUNDAI W052-31N SERPENTINE PULLEY KIA W052-34N DECOUPLER PULLEY CHEVROLET 920915 11453 11485 11696 11826 11515 FG12S015 FG12S077 FG12S106 FG12S118 FG15S018 FG15S020 FG15S026 FG15S081 FG15S100 17mm BORE, 55mm OD, 39.6mm W, 16x1.5 THREAD, 15mm DEEP, 8.7mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, USE W19-03 TOOL, CAP W112-30N TG12C057 17mm BORE, 52.7mm, 31.5mm W, 13mm DEEP, 22mm BELT, 8.5mm TO FIRST GROOVE, OEM FG12S047 FG12S072 FG12S119 TG12C131 TG12C183 17mm BORE, 55mm OD, 39.8mm W, 15mm DEEP, 16x1.5 THREAD, 19mm BELT, 8.5mm TO FIRST 5 GROOVE, CW, DECOUPLER, LITENS, OEM, USE W052-29 SERPENTINE CLUTCH PULLEY MERCEDES W052-32N SERPENTINE CLUTCH PULLEY AUDI W052-35N SERPENTINE PULLEY 24-94268 5510 F-238419.02 F-239973 F-239973.01 F-239973.02 F-576346 23886 20305 11619 TG11C035 TG11C074 TG14C043 TG14C046 TG14C069 TG14C071 TG12C098 17mm BORE, 52mm OD, 36.5mm W, 16mm DEEP, 16x1.5 THREAD, 15mm TO FIRST GROOVE 5 GROOVE, CW, USE 17mm BORE, 49mm OD, 11mm DEEP, 16x1.5 THREAD, 23mm BELT, 5mm TO FIRST GROOVE, CW, CLUTCH, INA, OEM, USE 17mm BORE, 49mm OD, 30.3mm W, 15mm DEEP, 22mm BELT, 8mm TO FIRST GROOVE, OEM W052-30N SERPENTINE CLUTCH PULLEY AUDI BMW BUICK CHEVROLET DAEWOO OPEL F-563248.01 11022 11399 11560 11704 11734 11809 11816 11832 20202 FG12S031 FG12S032 FG12S055 FG12S064 FG12S070 FG12S096 FG18D057 FG18S045 FG18S052 17mm BORE, 54mm OD, 34.2mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 9.7mm TO FIRST, CW, CLUTCH, INA, OEM, USE W052-33N SERPENTINE PULLEY CHEVROLET 11486 FG15S032 FG15S062 17mm BORE, 66mm OD, 33.6mm W, 13mm DEEP, 22mm BELT, 8.7mm TO FIRST GROOVE, OEM W052-36N SERPENTINE PULLEY CHEVROLET OPEL FG12S029 FG12S030 FG12S074 FG12S075 TG12C054 TG12C055 TG12C073 TG12C075 TG12C154 17mm BORE, 53.8mm, 33.5mm W, 13mm DEEP, 22mm BELT, 9.8mm TO FIRST GROOVE, OEM 108 Names and numbers are for reference purposes only

W052-37N SERPENTINE CLUTCH PULLEY F-575777 11673 W052-40N SERPENTINE DECOUPLER PULLEY HYUNDAI KIA 920026 11606 11694 W052-43N SERPENTINE PULLEY BUICK CHEVROLET GMC POLARIS 11459 11652 FG12T039 FG15S059 FG15S060 FG12S014 FG12S081 FG12S115 FGN12S104 TG12C067 TG12C174 17mm BORE, 50mm OD, 42.2mm W, 15mm DEEP, 16x1.5 THREAD, 22mm BELT 15.3MM TO FIRST, CW, CLUTCH, INA, OEM, USE 17mm BORE, 55mm OD, 40.5mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 8.8mm TO FIRST, CW, DECOUPLER, LITENS, OEM, USE 17mm BORE, 56mm OD, 27.8mm W, 13mm DEEP, 8.5mm TO FIRST GROOVE 5 GROOVE, OEM, ALTERNATE W052-07N W052-38N SERPENTINE CLUTCH PULLEY CHEVROLET W052-41N SERPENTINE DECOUPLER PULLEY BUICK CHEVROLET ROEWE BUICK W052-44N SERPENTINE PULLEY SAAB 5628 F-563248.03 11654 FG12S043 FG12S048 FG12S054 FG12S065 FG12S071 TG12C137 TG12C138 TG12C184 TG12C189 17mm BORE, 54mm OD, 38mm W, 14mm DEEP, 16x1.5 THREAD, 19mm BELT, 9.7mm TO FIRST GROOVE 5 GROOVE, CW, CLUTCH, INA, OEM, USE, COVER W112-31N 11831 FG12S017 FG12S078 FG12S120 FG12S121 TG12C071 TG12C178 TG12C194 17mm BORE, 55mm OD, 39.6mm W, 15mm DEEP, 16x1.5 THREAD, 19mm BELT, 8.5mm TO FIRST 5 GROOVE, CW, DECOUPLER, LITENS, OEM, USE 11456 11650 11697 FG12S012 FG12S080 FG12S116 TG12C053 TG12C056 TG12C180 TG12C181 17mm BORE, 56mm OD, 31.2mm W, 13mm DEEP, 8.5mm TO FIRST GROOVE, OEM W052-39N SERPENTINE CLUTCH PULLEY W052-42N SERPENTINE PULLEY W052-45N SERPENTINE DECOUPLER PULLEY HYUNDAI KIA F-601582 11648 11637 11651 24-94291-47 920015 95.012.12 ZM-95.012.12 11610 TG12C152 TG12C168 FG15S024 FG15S090 FGN15S160 2610428 17mm BORE, 52.5mm OD, 37mm W, 15mm DEEP, 16x1.5 THREAD, 22mm BELT, 8.5mm TO FIRST, CW, CLUTCH, INA, OEM, USE 17mm BORE, 54mm OD, 30.3mm W, 13mm DEEP, 8mm TO FIRST GROOVE 17mm BORE, 58mm OD, 40mm WIDE, 14mm DEEP, 16x1.5 THREAD, 9mm TO FIRST GROOVE, DECOUPLER, LITENS, USE INSTALLATION TOOL W19-03, CAP W112-30N Names and numbers are for reference purposes only 109

W052-46N SERPENTINE DECOUPLER PULLEY W052-49 PULLEY W052-52N SERPENTINE CLUTCH PULLEY HYUNDAI KIA CHRYSLER MERCEDES MERCEDES 24-94292-4 920019 95.012.11 ZM-95.012.11 5563 F-551657.01 F-551657.02 F-551657.03 F-551657.04 F-551657.05 11608 11609 11611 11123 13928 11309 2610128 2610819 2613746 2616559 SG12B023 SG12B024 TG17C032 TG17C047 17mm BORE, 58mm OD, 45mm W, 14mm DEEP, 16x1.5 THREAD, 9mm TO FIRST GROOVE, CW, DECOUPLER, LITENS, OEM, CAP W112-30N, USE 17mm BORE, 50mm OD, 29.5mm W, 7.5mm DEEP, 22mm BELT, 5mm TO FIRST GROOVE 17mm BORE, 50mm OD, 52mm W, 15mm DEEP, 16x1.5 THREAD, 19mm TO FIRST GROOVE 8 GROOVE, CW, INA, OEM, USE INSTALLATION TOOL W19-03 W052-47N SERPENTINE DECOUPLER PULLEY W052-51 SERPENTINE CLUTCH PULLEY W052-53N PULLEY CITROEN MINI COOPER PEUGEOT 24-94294-4 920021 95.012.09 ZM-95.012.09 5565 F-556533.01 920047 11653 11747 11334 20403 11693 FG15S065 FG15S091 FG15T044 TG12C059 TG12C120 FG12T050 17mm BORE, 52mm OD, 40mm W, 15mm DEEP, 16x1.5 THREAD, 13.5mm TO FIRST GROOVE 4 GROOVE, CW, DECOUPLER, LITENS, OEM, USE INSTALLATION TOOL W19-08, CAP W112-30N 17mm BORE, 49.5mm OD, 42mm WIDE, 14.5mm DEEP, 16x1.5 THREAD, 16mm TO FIRST GROOVE, CW, CLUTCH, ZEN, INSTALLATION TOOL W19-03, ALTERNATE W052-51N 17mm BORE, 55mm OD, 45mm W, 14.5mm DEEP, 16x1.5 THREAD, 8mm TO FIRST GROOVE, CW, DECOUPLER, LITENS OEM, USE, CAP W112-30N W052-48N CLUTCH PULLEY W052-51N SERPENTINE CLUTCH PULLEY W052-54N CLUTCH PULLEY BMW CITROEN MINI COOPER PEUGEOT AUDI F-551893 F-551893.01 5565 F-556533.01 11334 20403 24-94283 F-239779 F-239779.01 F-239779.02 F-239779.03 11160 11162 22819 23829 TG23C013 17mm BORE, 49mm OD, 36mm W, 14mm DEEP, 16x1.5mm THREAD, 11.5mm TO FIRST GROOVE 7 GROOVE, CW, CLUTCH, INA, OEM, USE FG15T044 TG12C059 TG12C061 TG12C120 17mm BORE, 49.5mm OD, 40mm WIDE, 14mm DEEP, 16x1.5 THREAD, 16.3mm TO FIRST GROOVE, CW, INA CLUTCH, OEM, USE, ALTERNATE W052-51 A13Vi241 TG15C145 TG16C010 TG16C011 TG17C023 TG17C044 17mm BORE, 64mm OD, 44mm W, 14mm DEEP, 16x1.5 THREAD, 22mm BELT, 17.1mm TO FIRST GROOVE, CW, INA, OEM, CAP W112-31N, USE 110 Names and numbers are for reference purposes only

2024 © autodocbox.com Privacy Policy | Terms of Service | Feedback